How to obtain more information - nh-choice.com

ItPaystoGetCertified
Inadigitalworld,digitalliteracyisanessentialsurvivalskill.Certificationprovesyouhavetheknowledgeandskill
tosolvebusinessproblemsinvirtuallyanybusinessenvironment.CertificationsarehighlyНІvaluedcredentialsthat
qualifyyouforjobs,increasedcompensation,andpromotion.
CompTIANetwork+certificationheldbymanyITStaffinorganizations:НІ21%ofITstaffwithinarandomsampling
ofU.S.organizationswithinacrosssectionofindustryverticalsholdNetwork+certification.
x TheCompTIANetwork+credentialвЂ“provesknowledgeofnetworkingfeaturesandfunctions
andistheleadingvendorНІneutralcertificationfornetworkingprofessionals.
x StartingSalaryНІTheaveragestartingsalaryofnetworkengineerscanbeupto$70,000.
x CareerPathwayвЂ“CompTIANetwork+isthefirststepinstartinganetworkingcareer,andis
recognizedbyMicrosoftaspartoftheirMSprogram.Othercorporations,suchasNovell,
CiscoandHPalsorecognizeCompTIANetwork+aspartoftheircertificationtracks.
x Morethan260,000вЂ“individualsworldwideareCompTIANetwork+certified.
x
Mandated/RecommendedbyorganizationsworldwideНІsuchasCisco,HP,Ricoh,theU.S.
StateDepartment,andU.S.governmentcontractorssuchasEDS,GeneralDynamics,and
NorthropGrumman.
HowCertificationHelpsYourCareer
StepstoGettingCertifiedandStayingCertified
ReviewExamObjectives
Reviewthecertificationobjectivestomakesureyouknowwhatiscoveredintheexam.
http://certification.comptia.org/Training/testingcenters/examobjectives.aspx
PracticefortheExam
Afteryouhavestudiedforthecertification,takeafreeassessmentandsampletesttogetanideaof
whattypeofquestionsmightbeontheexam.
http://certification.comptia.org/Training/testingcenters/samplequestions.aspxError!Hyperlink
referencenotvalid.
PurchaseanExamVoucher
PurchaseyourexamvoucherontheCompTIAMarketplace,whichislocatedat:
http://www.comptiastore.com/
TaketheTest!
Selectacertificationexamproviderandscheduleatimetotakeyourexam.Youcanfindexamproviders
atthefollowinglink:http://certification.comptia.org/Training/testingcenters.aspx
StayCertified!
EffectiveJanuary1,2011,CompTIANetwork+certificationsarevalidforthreeyearsfromthedateof
certification.Thereareanumberofwaysthecertificationcanberenewed.Formoreinformationgoto:
http://certification.comptia.org/getCertified/steps_to_certification/stayCertified.aspx
ContinuingEducation
Howtoobtainmoreinformation
x VisitCompTIAonlineНІwww.comptia.orgtolearnmoreaboutgettingCompTIAcertified.
x ContactCompTIAНІcall866НІ835НІ8020ext.5oremailquestions@comptia.org
x JointheITProCommunityвЂ“http://itpro.comptia.orgtojointheITcommunitytogetrelevantcareerinformation.
x Connectwithus:
Copyright В© Element K Corporation
CompTIAВ® Network+В® (Exam N10005)
Part Number: NH85708(EBEE)
Course Edition: 1.1
ACKNOWLEDGMENTS
Project Team
Content Developer: Ranjith Kumar and Nagarajan D R вЂў Content Manager: вЂў Graphic Designer: вЂў Project Manager: вЂў Media
Instructional Designer: вЂў Content Editor: вЂў Materials Editor: вЂў Business Matter Expert: вЂў Technical Reviewer: вЂў Project
Technical Support: Mike Toscano
NOTICES
DISCLAIMER: While Element K Corporation takes care to ensure the accuracy and quality of these materials, we cannot guarantee their accuracy, and all materials are provided without any warranty
whatsoever, including, but not limited to, the implied warranties of merchantability or п¬Ѓtness for a particular purpose. The name used in the data п¬Ѓles for this course is that of a п¬Ѓctitious company. Any
resemblance to current or future companies is purely coincidental. We do not believe we have used anyoneвЂ™s name in creating this course, but if we have, please notify us and we will change the name in
the next revision of the course. Element K is an independent provider of integrated training solutions for individuals, businesses, educational institutions, and government agencies. Use of screenshots,
photographs of another entityвЂ™s products, or another entityвЂ™s product name or service in this book is for editorial purposes only. No such use should be construed to imply sponsorship or endorsement of
the book by, nor any afп¬Ѓliation of such entity with Element K. This courseware may contain links to sites on the Internet that are owned and operated by third parties (the вЂіExternal SitesвЂі). Element K is
not responsible for the availability of, or the content located on or through, any External Site. Please contact Element K if you have any concerns regarding such links or External Sites.
TRADEMARK NOTICES: Element K and the Element K logo are trademarks of Element K Corporation and its afп¬Ѓliates.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries; the Sun Microsystems and Apple products and services discussed or described may be
trademarks of Sun Microsystems or Apple, Inc., respectively. All other product names and services used throughout this course may be common law or registered trademarks of their respective
proprietors.
Copyright В© 2012 В© 2012 Element K Corporation. All rights reserved. Screenshots used for illustrative purposes are the property of the software proprietor. This publication, or any part thereof, may not
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, storage in an information retrieval system, or otherwise, without express written
permission of Element K, 500 Canal View Boulevard, Rochester, NY 14623, (585) 240-7500, (800) 478-7788. Element K CoursewareвЂ™s World Wide Web site is located at
www.elementkcourseware.com.
This book conveys no rights in the software or other products about which it was written; all use or licensing of such software or other products is the responsibility of the user according to terms and
conditions of the owner. Do not make illegal copies of books or software. If you believe that this book, related materials, or any other Element K materials are being reproduced or transmitted without
permission, please call (800) 478-7788.
The logo of the CompTIA Authorized Curriculum Program and the status of this or other training material as Authorized under the CompTIA Authorized Curriculum Program signiп¬Ѓes that, in CompTIAвЂ™s
opinion, such training material covers the content of CompTIAвЂ™s related certiп¬Ѓcation exam. CompTIA has not reviewed or approved the accuracy of the contents of this training material and speciп¬Ѓcally
disclaims any warranties of merchantability or п¬Ѓtness for a particular purpose. CompTIA makes no guarantee concerning the success of persons using any such authorized or other training material in
order to prepare for any CompTIA certiп¬Ѓcation exam. The contents of this training material were created for the CompTIA Network+ exam covering CompTIA certiп¬Ѓcation exam objectives that were current
as of 2011.
How to Become CompTIA Certiп¬Ѓed: This training material can help you prepare for and pass the related CompTIA certiп¬Ѓcation exam or exams. In order to achieve CompTIA certiп¬Ѓcation, you must register
for and pass a CompTIA certiп¬Ѓcation exam or exams. In order to become CompTIA certiп¬Ѓed, you must:
1.
Select a certiп¬Ѓcation exam provider. For more information, visit www.comptia.org/certiп¬Ѓcations/testprep.aspx.
2.
Register for and schedule a time to take the CompTIA certiп¬Ѓcation exam(s) at a convenient location.
3.
Read and sign the Candidate Agreement, which will be presented at the time of the exam(s). The text of the Candidate Agreement can be found at www.comptia.org/certiп¬Ѓcations/policies/
agreement.aspx.
CompTIAВ® Network+В® (Exam N10-005)
ii
Copyright В© Element K Corporation
CONTENTS
COMPTIAВ® NETWORK+В® (EXAM
N10-005)
LESSON 1 - NETWORK THEORY
A. Networking Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Computer Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Network Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
The Network Backbone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Types of Network Backbones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Peer Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Host Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
B. Network Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
LANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
WANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Network Coverage Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
The Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Intranets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Extranets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Enterprise Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contents
iii
Copyright В© Element K Corporation
CONTENTS
C. Standard Network Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Network Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Segments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Centralized Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Client/Server Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Peer-to-Peer Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mixed Mode Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
D. Physical Network Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Point-to-Point Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Multipoint Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Radiated Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
The Physical Bus Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Data Transmission on a Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
The Physical Star Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
The Physical Ring Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
The Physical Mesh Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The Physical Tree Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Hybrid Topologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Types of Hybrid Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
E. Logical Network Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The Logical Bus Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
The Logical Ring Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
The Logical Star Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CompTIAВ® Network+В® (Exam N10-005)
iv
Copyright В© Element K Corporation
LESSON 2 - NETWORK COMMUNICATIONS METHODS
CONTENTS
A. Data Transmission Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Data Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Digital Data Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Unicast Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Broadcast Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Multicast Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Serial Data Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Parallel Data Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Baseband Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Broadband Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
B. Media Access Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Types of Media Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Multiplexing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
CSMA/CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
CSMA/CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Contention Domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
C. Signaling Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Analog Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Analog Signal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Digital Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Analog Signal Modulation and Demodulation . . . . . . . . . . . . . . . . . . . . 57
Digital Signal Modulation and Demodulation . . . . . . . . . . . . . . . . . . . . . 58
Digital Signal Reference Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Contents
v
Copyright В© Element K Corporation
CONTENTS
LESSON 3 - NETWORK MEDIA AND HARDWARE
A. Bounded Network Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Network Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Copper Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Twisted Pair Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Twisted Pair Cable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Twisted Pair Cable Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Coaxial Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Coaxial Cable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Coaxial Connector Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Network Media Performance Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Media Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Structured Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Premise Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Plenum and PVC Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Fiber Optic Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Fiber Optic Cable Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Fiber Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Cable Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Other Cable Media Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
B. Unbounded Network Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Wireless Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Radio Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Broadcast Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Spread Spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Types of Spread Spectrum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Infrared Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Microwave Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Wireless Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
How to Install a Wireless Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
CompTIAВ® Network+В® (Exam N10-005)
vi
Copyright В© Element K Corporation
CONTENTS
C. Noise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Electrical Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Sources of Electrical Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Shielding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Differential Signaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Noise Control with Twisted Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Noise Reduction Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
D. Network Connectivity Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Virtual Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Switch Installation and Conп¬Ѓguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Router Installation and Conп¬Ѓguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Virtual Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Virtual PBX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
NaaS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Legacy Network Connectivity Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Contents
vii
Copyright В© Element K Corporation
CONTENTS
LESSON 4 - NETWORK IMPLEMENTATIONS
A. Ethernet Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Switched Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Ethernet Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
MAC Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Networking Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Standards Organizations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
IEEE 802.x Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
The 10Base Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Fast Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Gigabit Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Ring-Based Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
B. Wireless Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
WLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
WLAN Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Wireless Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Wireless Antenna Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Wireless Antenna Performance Factors . . . . . . . . . . . . . . . . . . . . . . . . . . 129
The IEEE 802.11 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
802.11 Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
802.11 Beacon Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Basic Wireless Network Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . 132
CompTIAВ® Network+В® (Exam N10-005)
viii
Copyright В© Element K Corporation
LESSON 5 - NETWORKING MODELS
CONTENTS
A. The OSI Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
The OSI Reference Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Layer 1: The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Layer 2: The Data Link Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Layer 3: The Network Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Layer 4: The Transport Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Network- and Transport-Layer Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Layer 5: The Session Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Layer 6: The Presentation Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Layer 7: The Application Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Application-, Presentation-, and Session-Layer Protocols . . . . . . . . . . . . 145
The OSI Data Communication Process . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
B. The TCP/IP Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
The TCP/IP Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
The TCP/IP Network Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Layers in the TCP/IP Network Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Comparison of the OSI and TCP/IP Models . . . . . . . . . . . . . . . . . . . . . . . . 150
Data Encapsulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Protocol Binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
LESSON 6 - TCP/IP ADDRESSING AND DATA DELIVERY
A. The TCP/IP Protocol Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
The IP Data Packet Delivery Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
UDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
ARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
ICMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
IGMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Contents
ix
Copyright В© Element K Corporation
CONTENTS
B. IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Data Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Network Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Network Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Subnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Subnet Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Subnet Mask Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
IP Address Assignment Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Binary and Decimal Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Binary ANDing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
C. Default IP Addressing Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
ICANN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
IP Address Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Private IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
The Local and Remote Addressing Process . . . . . . . . . . . . . . . . . . . . . . . 179
Default Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
D. Create Custom IP Addressing Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Custom TCP/IP Subnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Custom Subnet Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Variable Length Subnet Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Classless Inter Domain Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
E. Implement IPv6 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
IPv4 Address Space Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
IPv6 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Implement IPv6 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
CompTIAВ® Network+В® (Exam N10-005)
x
Copyright В© Element K Corporation
CONTENTS
F. Delivery Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Buffering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Data Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Parity Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Cyclic Redundancy Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
LESSON 7 - TCP/IP SERVICES
A. Assign IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Static and Dynamic IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Static IP Address Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
The DHCP Lease Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
APIPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
IP Conп¬Ѓguration Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
The ping Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
B. Domain Naming Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Host Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Types of DNS Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
The DNS Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
The DNS Name Resolution Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
The HOSTS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
C. TCP/IP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
The tracert Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
The pathping Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
The MTR Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Contents
xi
Copyright В© Element K Corporation
CONTENTS
D. Common TCP/IP Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
NTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
SMTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
POP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
IMAP4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
NNTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
HTTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
HTTPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
E. TCP/IP Interoperability Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
NFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
SCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
SMB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
LDAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Zeroconf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
LESSON 8 - LAN INFRASTRUCTURE
A. Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Switches and Network Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Types of Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Circuit Switching Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Packet Switching Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Virtual Circuit Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
Cell Switching Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
CompTIAВ® Network+В® (Exam N10-005)
xii
Copyright В© Element K Corporation
CONTENTS
B. Enable Static Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Static Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Types of Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Routers vs. Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Routing Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Routing Table Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Routing Entry Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
The route Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
The Routing Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Autonomous Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Router Roles in Autonomous Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Routing Methods in Autonomous Systems . . . . . . . . . . . . . . . . . . . . . . . . 266
C. Implement Dynamic IP Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Dynamic Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Distance-Vector Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Link State Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Path-Vector Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Route Convergence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Routing Loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Count-to-Inп¬Ѓnity Loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Router Discovery Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
STP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
CARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
D. Virtual LANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Types of VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
VLAN Switch Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
VTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
E. Plan a SOHO Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
SOHO Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
SOHO Network Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
How to Plan a SOHO Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Contents
xiii
Copyright В© Element K Corporation
CONTENTS
LESSON 9 - WAN INFRASTRUCTURE
A. WAN Transmission Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
ATM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
Frame Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
MPLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
ISDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
T-Carrier Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Digital Network Hierarchies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
SONET/SDH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
The Optical Carrier System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Satellite Transmission Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
WWAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
WiMAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
B. WAN Connectivity Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Cable Internet Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Cable Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Dial-Up Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Dial-Up Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Leased Data Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
ICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
Satellite Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
C. Voice over Data Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Converged Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Voice over Data Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
VoIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
VoIP Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
CompTIAВ® Network+В® (Exam N10-005)
xiv
Copyright В© Element K Corporation
LESSON 10 - REMOTE NETWORKING
CONTENTS
A. Remote Network Architectures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Remote Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Remote Access Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Remote Desktop Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Beneп¬Ѓts of Remote Desktop Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
RAS Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
Remote Control Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
B. Remote Access Networking Implementations . . . . . . . . . . . . . . . . . . . . . . . 332
Remote Access Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
PPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
PPP Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Remote Access Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Web-Based Remote Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
C. Virtual Private Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
VPNs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
Tunneling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
VPN Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
Advantages of VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
VPN Data Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
VPN Concentrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
VPN Connection Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
D. VPN Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
PAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
CHAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
The Challenge-Response Authentication Process. . . . . . . . . . . . . . . . . . 346
TACACS+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
PPTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
L2TP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
Contents
xv
Copyright В© Element K Corporation
CONTENTS
LESSON 11 - SYSTEM SECURITY
A. Computer Security Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
Security Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
Least Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Non-Repudiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
Threats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
Vulnerabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
Risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Unauthorized Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Data Theft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357
Hackers and Attackers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
B. System Security Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
NTFS Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
Group Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
C. Authentication Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
User Name/Password Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Strong Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Tokens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Biometrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Multi-Factor Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
Mutual Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
SSO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
EAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368
Kerberos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
Wireless Authentication Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
CompTIAВ® Network+В® (Exam N10-005)
xvi
Copyright В© Element K Corporation
CONTENTS
D. Encryption Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
Encryption and Security Goals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
Key-Based Encryption Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
WPA/WPA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Digital Certiп¬Ѓcates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
Certiп¬Ѓcate Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
PKI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
Certiп¬Ѓcate Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
DES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
Encryption Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Encryption Using SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
LESSON 12 - NETWORK SECURITY
A. Network Perimeter Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
The NAT Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
IP Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
MAC Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
Firewalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
Firewall Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
Common Firewall Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
DMZs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Proxy Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Web Proxy Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Website Caching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
NAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
Physical Network Security Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Contents
xvii
Copyright В© Element K Corporation
CONTENTS
B. Intrusion Detection and Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
Intrusion Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
IDSs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
Types of IDSs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
Passive and Active IDSs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409
IPSs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410
Port Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
Vulnerability Assessment Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
Network Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
C. Protect Network Traffic Using IPSec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
IPSec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
IPSec Protection Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
IPSec Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
IPSec Transport Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
IKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
Security Associations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
IPSec Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419
IPSec Policy Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Windows IPSec Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
CompTIAВ® Network+В® (Exam N10-005)
xviii
Copyright В© Element K Corporation
LESSON 13 - NETWORK SECURITY THREATS AND ATTACKS
CONTENTS
A. Network-Based Security Threats and Attacks . . . . . . . . . . . . . . . . . . . . . . . 428
Physical Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
Physical Security Threats and Vulnerabilities . . . . . . . . . . . . . . . . . . . . . . . 429
Social Engineering Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
Social Engineering Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
Malicious Code Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Types of Malicious Code Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
Types of Viruses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
Buffer Overп¬‚ow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
Password Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
Types of Password Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436
IP Spooп¬Ѓng Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437
Session Hijacking Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
DoS Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
DDoS Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
Man-in-the-Middle Attacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
Port Scanning Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
Replay Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
FTP Bounce Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
ARP Poisoning Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
Wireless Vulnerabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
Contents
xix
Copyright В© Element K Corporation
CONTENTS
B. Apply Threat Mitigation Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
Patch Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
Antivirus Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451
Internet Email Virus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
Anti-Spam Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
Security Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
Common Security Policy Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
Security Incident Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458
IRPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458
Change Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
C. Educate Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
Employee Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463
User Security Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
LESSON 14 - NETWORK MANAGEMENT
A. Network Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
Network Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472
Network Monitoring Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473
Network Monitoring Tool Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474
Network Traffic Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474
Port Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474
Traffic Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475
Network Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
System Performance Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
Protocol Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
Network Fault Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479
CompTIAВ® Network+В® (Exam N10-005)
xx
Copyright В© Element K Corporation
CONTENTS
B. Conп¬Ѓguration Management Documentation . . . . . . . . . . . . . . . . . . . . . . . 482
Network Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482
Conп¬Ѓguration Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Network Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
Physical Network Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484
Logical Network Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
Critical Hardware and Software Inventories . . . . . . . . . . . . . . . . . . . . . . . 486
Network Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487
Legal Compliance Requirements and Regulations. . . . . . . . . . . . . . . . . 488
Network Baselines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
The Network Baselining Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489
C. Network Performance Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
The Need for QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
QoS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Traffic Shaping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
Load Balancing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
High Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
Caching Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498
High-Bandwidth Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499
Factors Affecting a QoS Implementation . . . . . . . . . . . . . . . . . . . . . . . . . 499
LESSON 15 - NETWORK TROUBLESHOOTING
A. Network Troubleshooting Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
Troubleshooting Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505
The Network+ Troubleshooting Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
Contents
xxi
Copyright В© Element K Corporation
CONTENTS
B. Network Troubleshooting Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
Troubleshooting with IP Conп¬Ѓguration Utilities. . . . . . . . . . . . . . . . . . . . . . 509
The ping Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
The traceroute Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510
The arp Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
The NBTSTAT Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512
The NETSTAT Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513
The Nslookup Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
SNIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
C. Hardware Troubleshooting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
Network TechnicianвЂ™s Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
Electrical Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522
Wire Crimpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523
Punch Down Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523
Punch Down Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523
Circuit Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 524
Multimeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 524
Voltmeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525
Cable Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
Cable Certiп¬Ѓers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
Types of Cable Testers and Certiп¬Ѓers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
Crossover Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
Hardware Loopback Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528
Time-Domain Reп¬‚ectometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
Tone Generators and Locators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
Environment Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
Butt Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
Network Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532
Demarc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
Wireless Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
WLAN Survey Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
CompTIAВ® Network+В® (Exam N10-005)
xxii
Copyright В© Element K Corporation
CONTENTS
D. Common Connectivity Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
Physical Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
Logical Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538
Wireless Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
Routing and Switching Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
APPENDIX A - MAPPING NETWORK+ COURSE CONTENT TO THE
COMPTIA NETWORK+ EXAM OBJECTIVES
APPENDIX B - COMPTIA NETWORK+ ACRONYMS
APPENDIX C - NETWORK FAULT TOLERANCE METHODS
A. Network Fault Tolerance Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577
RAID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577
Non-RAID Disk Fault Tolerance Features . . . . . . . . . . . . . . . . . . . . . . . . . . 578
Link Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579
How to Create an Enterprise Fault Tolerance Plan . . . . . . . . . . . . . . . . . . 579
APPENDIX D - DISASTER RECOVERY PLANNING
A. Disaster Recovery Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581
Disaster Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581
Disaster Recovery Plans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583
The Network Reconstruction Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583
Hot, Warm, and Cold Sites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584
Specialized Data Backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585
Backup Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587
Network Reconstruction Plan Maintenance . . . . . . . . . . . . . . . . . . . . . . 588
LESSON LABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 589
SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 613
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 673
Contents
xxiii
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
xxiv
Copyright В© Element K Corporation
INTRODUCTION
ABOUT THIS COURSE
The CompTIA Network+В® (Exam N10-005) course builds on your existing user-level knowledge and experience with personal computer operating systems and networks to present the
fundamental skills and concepts that you will need to use on the job in any type of networking
career. If you are pursuing a CompTIA technical certiп¬Ѓcation path, the CompTIA A+ certiп¬Ѓcation is an excellent п¬Ѓrst step to take before preparing for the CompTIA Network+ certiп¬Ѓcation.
The CompTIA Network+В® (Exam N10-005) course can beneп¬Ѓt you in two ways. It can assist
you if you are preparing to take the CompTIA Network+ examination (Exam N10-005). Also,
if your job duties include network troubleshooting, installation, or maintenance, or if you are
preparing for any type of network-related career, it provides the background knowledge and
skills you will require to be successful.
Course Description
Target Student
This course is intended for entry-level computer support professionals with a basic knowledge
of computer hardware, software, and operating systems to prepare for the CompTIAВ® Network+В® (Exam N10-005), or who wish to increase their knowledge and understanding of
networking concepts and acquire the required skills to prepare for a career in network support
or administration. A typical student taking up the CompTIAВ® Network+В® (Exam N10-005)
course should have a minimum of nine months or more of professional computer support experience as a PC or help desk technician. Networking experience is helpful but not mandatory;
A+ certiп¬Ѓcation or equivalent skills and knowledge is helpful but not mandatory.
Course Prerequisites
To ensure your success, you will need basic Windows end-user computer skills. To meet this
prerequisite, you can take any one or more of the following New Horizons courses, or have
equivalent experience:
вЂў
Introduction to Personal Computers: Using Windows XP
вЂў
Windows XP Professional: An Introduction
вЂў
Introduction to Personal Computers: Using Windows 7
вЂў
MicrosoftВ® WindowsВ® 7: Level 1
Introduction
xxv
Copyright В© Element K Corporation
INTRODUCTION
вЂў
MicrosoftВ® WindowsВ® 7: Level 2
In addition, we highly recommend that you hold the CompTIA A+ certiп¬Ѓcation, or have
equivalent skills and knowledge. You may want to take the following New Horizons course:
CompTIAВ® A+В® Certiп¬Ѓcation: A Comprehensive Approach for All 2009 Exam Objectives (WindowsВ® 7)
How to Use This Book
As a Learning Guide
This book is divided into lessons and topics, covering a subject or a set of related subjects. In
most cases, lessons are arranged in order of increasing proп¬Ѓciency.
The results-oriented topics include relevant and supporting information you need to master the
content. Each topic has various types of activities designed to enable you to practice the guidelines and procedures as well as to solidify your understanding of the informational material
presented in the course.
At the back of the book, you will п¬Ѓnd a glossary of the deп¬Ѓnitions of the terms and concepts
used throughout the course. You will also п¬Ѓnd an index to assist in locating information within
the instructional components of the book.
As a Review Tool
Any method of instruction is only as effective as the time and effort you, the student, are willing to invest in it. In addition, some of the information that you learn in class may not be
important to you immediately, but it may become important later. For this reason, we encourage you to spend some time reviewing the content of the course after your time in the
classroom.
As a Reference
The organization and layout of this book make it an easy-to-use resource for future reference.
Taking advantage of the glossary, index, and table of contents, you can use this book as a п¬Ѓrst
source of deп¬Ѓnitions, background information, and summaries.
Course Objectives
In this course, you will describe the major networking technologies, systems, skills, and tools
in use in modern networks.
You will:
вЂў
identify the basic network theory concepts.
вЂў
identify the major network communications methods.
вЂў
describe network media and hardware components.
вЂў
identify the major types of network implementations.
вЂў
identify the components of a TCP/IP network implementation.
CompTIAВ® Network+В® (Exam N10-005)
xxvi
Copyright В© Element K Corporation
INTRODUCTION
вЂў
identify TCP/IP addressing and data delivery methods.
вЂў
identify the major services deployed on TCP/IP networks.
вЂў
identify the components of a LAN implementation.
вЂў
identify the infrastructure of a WAN implementation.
вЂў
identify the components of a remote network implementation.
вЂў
identify the major issues and methods to secure systems on a network.
вЂў
identify the major issues and technologies in network security.
вЂў
identify network security threats and attacks.
вЂў
identify the tools, methods, and techniques used in managing a network.
вЂў
describe troubleshooting of issues on a network.
Introduction
xxvii
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
xxviii
Copyright В© Element K Corporation
LESSON 1
LESSON 1
Lesson Time
1 hour(s), 10 minutes
Network Theory
In this lesson, you will identify the basic network theory concepts.
You will:
вЂў
Describe common terminology used in computer networking.
вЂў
Describe the primary categories of networks.
вЂў
Describe the standard networking models.
вЂў
Describe the primary physical network topologies.
вЂў
Describe the primary logical network topologies.
Lesson 1: Network Theory
1
Copyright В© Element K Corporation
LESSON 1
Introduction
The CompTIA Network+ certiп¬Ѓcation covers a wide range of knowledge and skills that apply
to different networking job roles. Any networking job role requires a fundamental knowledge
of network terminology, components, models, and topologies. In this lesson, you will identify
the basic concepts of the current networking theory.
With a background in CompTIA Network+ information and skills, your networking career can
move in many directions. Whether you are a network support technician, installer, or administrator, knowledge of the basic networking theory provides the necessary foundation needed for
learning more advanced networking concepts. A good grasp of the fundamental networking
theory will help you succeed in any network-related job role.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂ”
вЂў
Topic B:
вЂ”
вЂў
вЂў
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
Topic C:
вЂ”
вЂў
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
3.5 Describe different network topologies.
Topic D:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.5 Describe different network topologies.
вЂ”
3.7 Compare and contrast different LAN technologies.
Topic E:
вЂ”
3.5 Describe different network topologies.
TOPIC A
Networking Terminology
This lesson introduces the primary elements of the network theory. In the computer industry,
there is a set of common terminology used to discuss the network theory. In this topic, you
will deп¬Ѓne common terms used in computer networking.
Networking, like any other technical discipline, has a language of its own. Part of mastering
the technology involves familiarity with the language you use to describe that technology. With
too many technical terms involved in the п¬Ѓeld of networking, the information and deп¬Ѓnitions
in this topic will help you get familiar with these terms and the context in which they are used
in networking.
CompTIAВ® Network+В® (Exam N10-005)
2
Copyright В© Element K Corporation
LESSON 1
Computer Networks
Deп¬Ѓnition:
A computer network is a group of computers that are connected together to communicate and share network resources such as п¬Ѓles and peripheral devices. No two
computer networks are alike in size or in conп¬Ѓguration. Each network, however,
includes common components that provide the resources and communications channels
necessary for the network to operate.
Example:
Figure 1-1: A simple computer network.
Network Components
There are several common components that make up a computer network, each of which performs a speciп¬Ѓc task.
Network Component
Description
Device
Hardware such as computers, servers, printers, fax machines, switches, and
routers.
Physical media
Media that connects devices to a network and transmits data between the
devices.
Network adapter
Hardware that translates data between the network and a device.
Network operating system
Software that controls network traffic and access to common network
resources.
Nodes
Deп¬Ѓnition:
A node, commonly referred to as a workstation or a client, is any device that can connect to a network and generate, process, or transfer data. Every node has addressing
information to enable other devices to communicate with it. Network nodes can either
be endpoints or redistribution points. Endpoints are nodes that function as a source or
destination for data transfer. Redistribution points are nodes that transfer data, such as
a network switch or a router.
Lesson 1: Network Theory
3
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-2: Nodes on a network.
The Network Backbone
Deп¬Ѓnition:
The network backbone is a very-high-speed transmission path that carries the majority
of network data. It connects either small networks into a larger structure, or server
nodes to a network where the majority of client computers are attached. The technology in use on a backbone network can be different from that used on client network
sections. Since the backbone cabling connects switches and routers on a network, it
can carry more traffic than other types of cabling on the network.
Example:
Figure 1-3: A network backbone is the highest-speed transmission path.
Types of Network Backbones
There are several types of network backbones that you may encounter.
Network Backbone
Description
Serial
Consists of multiple switches connected by one backbone
cable. Typically not scaled for enterprise-wide use.
CompTIAВ® Network+В® (Exam N10-005)
4
Copyright В© Element K Corporation
LESSON 1
Network Backbone
Description
Distributed/hierarchical
Consists of multiple switches connected serially to hubs or
routers. Due to their hierarchical structure, these networks
can be easily expanded without a signiп¬Ѓcant cost impact.
Serves well as one-site enterprise-wide networks; their switch
layers can be conп¬Ѓgured by geography (a п¬‚oor in a building)
or function (a workgroup). Distributed backbone networks
enable an administrator to segregate workgroups, simplifying
their management.
Collapsed
Uses a router or switch as the nexus for several subnetworks.
The router or switch must have multiprocessors to bear the
frequently high level of network traffic. Router or switch failures in a collapsed backbone can bring down the entire
network. Depending on the routersвЂ™ processing capabilities,
data transmission can also be slow.
Parallel
Suits enterprise-wide applications. Like the collapsed backbone network, the parallel backbone network uses a central
router or switch but augments the dependent switches with
multiple cable connections. These multiple links ensure connectivity to the whole enterprise.
Servers
Deп¬Ѓnition:
A server is a network computer that shares resources with and responds to requests
from computers, devices, and other servers on the network. Servers provide centralized
access and storage for resources that can include applications, п¬Ѓles, printers or other
hardware, and services such as email. A server can be optimized and dedicated to one
speciп¬Ѓc function, or it can serve general needs. Multiple servers of various types can
coexist on the same network.
Example:
Figure 1-4: Servers performing generic and dedicated tasks.
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 is the latest version of MicrosoftвЂ™s server-oriented
Windows operating system. Windows Server 2008 R2 provides:
Lesson 1: Network Theory
5
Copyright В© Element K Corporation
LESSON 1
вЂў
The Active Directory service (ADS).
вЂў
Integrated network services such as the Domain Name System (DNS) and the
Dynamic Host Conп¬Ѓguration Protocol (DHCP).
вЂў
Advanced services such as clustering, a public-key infrastructure, routing, and
web services.
вЂў
User and group security on the п¬Ѓle- and object- levels.
вЂў
Advanced security features such as a built-in п¬Ѓrewall, п¬Ѓle encryption, and Internet
Protocol Security (IPSec).
SUSE Linux Enterprise Server
SUSE is an open source server operating system that uses the Linux platform. The latest version is SUSE Linux Enterprise Server 11 SP1.
Clients
Deп¬Ѓnition:
A client is a network computer that utilizes the resources of other network computers,
including other clients. The client computer has its own processor, memory, and storage, and can maintain its own resources and perform its own tasks and processing.
Any type of computer on a network can function as a client of another computer when
needed.
The term вЂњclientвЂќ most often refers to workstation or desktop computers employed by end users. Any
computer on the network can function as a client, when it uses other computersвЂ™ resources, such as a
Windows Server 2008 R2 computer accessing resources on another server.
Example:
Figure 1-5: Clients connected to a server.
CompTIAВ® Network+В® (Exam N10-005)
6
Copyright В© Element K Corporation
LESSON 1
Microsoft Windows 7
MicrosoftВ® Windows 7В® is a popular and widely deployed operating system on client
computers. Windows 7 features an enhanced Graphical User Interface (GUI), support
for a wide range of applications and devices, a minimum of 32-bit processing, native
networking support, and a large suite of built-in applications and accessories such as
the Internet ExplorerВ® browser. Windows 7 currently comes preinstalled on many personal computers sold commercially.
Peer Computers
Deп¬Ѓnition:
A peer is a self-sufficient computer that acts as both a server and a client to other computers on a network. Peer computing is most often used in smaller networks with no
dedicated central server, but both clients and servers in other types of networks can
share resources with peer computers.
Example:
Figure 1-6: Peer computers in a network.
Host Computers
Deп¬Ѓnition:
A host computer is a powerful, centralized computer system, such as a mainframe
computer, that performs data storage and processing tasks on behalf of clients and
other network devices. On a host-based network, the host computer does all computing
tasks and returns the resultant data to the end userвЂ™s computer.
Lesson 1: Network Theory
7
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-7: A host computer connected to several network devices.
TCP/IP Hosts
In the early days of computer networking, all computers were host computers that controlled the activities of network terminal devices. The hosts were joined together to
communicate in the early research networks that laid the foundation for the Internet.
As the TCP/IP protocol was adopted and became ubiquitous, and personal computers
joined the networks, the term host was generalized and is now used to refer to virtually any independent system on a TCP/IP network.
Terminals
Deп¬Ѓnition:
A terminal is a specialized device on a host-based network that transmits data a user
enters to a host for processing and displays the results. Terminals are often called
вЂњdumbвЂќ because they have no processor or memory of their own. Terminals usually
consist of just a keyboard and a monitor. Standard client computers that need to interact with host computers can run software called a terminal emulator so that they
appear as dedicated terminals to the host.
Example:
Figure 1-8: A terminal on a network.
CompTIAВ® Network+В® (Exam N10-005)
8
Copyright В© Element K Corporation
LESSON 1
ACTIVITY 1-1
Deп¬Ѓning Networking Terminology
Scenario:
In this activity, you will deп¬Ѓne common terms used in computer networking.
1.
What is a network computer that shares resources with and responds to requests from
other computers called?
a) Client
b) Server
c) Terminal
d) Host
2.
Match the network term to its definition.
Server
Client
Host
Terminal
3.
a.
A computer that shares its resources
with other computers on a network.
b. A device that transmits data from a
user to a host for processing.
c. A computer that uses the resources of
other computers on the network.
d. A centralized computer that performs
storage and processing tasks for other
network devices.
What is a network computer that transmits data a user enters to a host for processing
and displays the results?
a) Server
b) Host
c) Terminal
d) Client
4.
What is a computer that acts as both a server and a client?
a) Host
b) Client
c) Server
d) Peer
5.
True or False? A host computer transmits data to another computer for processing and
displays the result to a user.
True
False
Lesson 1: Network Theory
9
Copyright В© Element K Corporation
LESSON 1
6.
In which type of network are multiple switches connected by a single backbone cable?
a) Distributed
b) Serial
c) Collapsed
d) Parallel
TOPIC B
Network Categories
So far, you have learned about various network components that constitute a network. You will
now describe how you can replicate these basic network structures on a larger scale. In this
topic, you will identify the primary network categories.
The area covered by present day networks may be small enough to п¬Ѓt a building or large
enough to span continents. Networks of different sizes have different requirements and features, and may use completely different technologies. Companies can deploy a network
depending on their size and communications needs. As a network professional, you may work
with a network of any possible size or type. A thorough knowledge of the size-based classiп¬Ѓcation of networks and their related technologies will help you choose the network type that is
best suited for your needs.
LANs
Deп¬Ѓnition:
A Local Area Network (LAN) is a self-contained network that spans a small area, such
as a single building, п¬‚oor, or room. In a LAN, all nodes and segments are directly connected with cables or short-range wireless technologies. It does not require a leased
telecommunication system to function. Due to their smaller size and fewer number of
nodes, LANs provide faster data transfer than other network types. Different technologies can be implemented on a LAN depending on conп¬Ѓguration needs and working of
the network. Ethernet is the most commonly implemented LAN technology. Other
LAN technologies such as the token ring, the token bus, and the Fiber Distributed Data
Interface (FDDI) can also be used on LANs.
CompTIAВ® Network+В® (Exam N10-005)
10
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-9: Devices connected to form a LAN.
LAN Administrator Duties
LAN administrators are responsible for managing and maintaining the local network.
The administratorвЂ™s responsibilities not only include maintaining machines and cabling
but also network software. LAN administrators may also be required to perform installation and deployment, upgrades, and troubleshooting for different applications. LAN
administrators need to be versatile and adaptable with a broad range of skills and
knowledge about network applications and hardware.
WANs
Deп¬Ѓnition:
A Wide Area Network (WAN) is a network that spans a large area, often across multiple
geographical locations. WANs typically connect multiple LANs and other networks
using long-range transmission media. Such a network scheme facilitates communication among users and computers in different locations. WANs can be private, such as
those built and maintained by large, multinational corporations, or they can be public,
such as the Internet.
Lesson 1: Network Theory
11
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-10: A WAN composed of several LANs.
WAN Administrator Duties
WAN administrators typically handle more complex technical issues than LAN administrators, and focus on resolving network issues rather than user issues. A WAN
administrator performs the following duties:
вЂў
Designs and maintains the connection scheme between remote segments of a network.
вЂў
Develops and troubleshoots routing structures.
вЂў
Works with both voice and data systems.
вЂў
Develops scripts to automate complex network administrative tasks.
вЂў
Works on security issues and helps implement recovery schemes.
вЂў
Plans, tests, and implements hardware and software upgrades.
Network Coverage Areas
There are other network categories based on the geographical area they cover.
Network Category
Description
MAN
A Metropolitan Area Network (MAN) covers an area equivalent to a city or a municipality.
CAN
A Campus Area Network (CAN) covers an area equivalent
to an academic campus or business park. A CAN is typically owned or used exclusively by an entity.
CompTIAВ® Network+В® (Exam N10-005)
12
Copyright В© Element K Corporation
LESSON 1
Network Category
Description
PAN
A Personal Area Network (PAN) connects two to three computers with cables and is most often seen in small or home
offices.
A Wireless Personal Area Network (WPAN) is a variation of
PAN that connects wireless devices in close proximity but
not through a Wireless Access Point (WAP). Infrared and
Bluetooth are technologies used for connecting devices in a
WPAN.
The Internet
The Internet is the single largest global WAN, linking virtually every country in the world.
Publicly owned and operated, the Internet is widely used for sending email, transferring п¬Ѓles,
and carrying out online commercial transactions. All information on the Internet is stored as
web pages, which can be accessed through software known as a web browser. Most of the processes related to the Internet are speciп¬Ѓed by the Internet Protocol (IP), and all the nodes
connected to the Internet are identiп¬Ѓed by a unique address, known as an IP address.
The Internet Corporation for Assigned Names and Numbers (ICANN) coordinates the assignments of unique identiп¬Ѓcations on the Internet, such as domain names, IP addresses, and
extension names, while the Internet Society (ISOC) coordinates and oversees standards and
practices for the Internet.
You can get more information on the ISOC at its website www.isoc.org.
Figure 1-11: The Internet consists of computers connected across the world.
Intranets
Deп¬Ѓnition:
An intranet is a private network that uses Internet protocols and services to share a
companyвЂ™s information with its employees. As with the Internet, the employees can
access an intranet via a web browser and navigate a companyвЂ™s web pages. However,
an intranet is not very useful if it is not connected with the Internet. An intranet contains information that is segregated from the Internet for conп¬Ѓdentiality and security
reasons.
Lesson 1: Network Theory
13
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-12: An intranet connecting users in a private network.
Extranets
Deп¬Ѓnition:
An extranet is a private network that grants controlled access to users outside of the
network. It is an extension of an organizationвЂ™s intranet. With the help of an extranet,
organizations can grant access to users such as vendors, suppliers, and clients to connect to resources on the network.
Example:
Figure 1-13: An extranet connecting a user outside of the network.
CompTIAВ® Network+В® (Exam N10-005)
14
Copyright В© Element K Corporation
LESSON 1
Enterprise Networks
Deп¬Ѓnition:
An enterprise network is a network that includes elements of both local and wide area
networks. Owned and operated by a single organization to interlink its computers and
resources, it employs technologies and software designed for fast data access, email
exchange, and collaboration. Enterprise networks are scalable and include high-end
equipment, strong security systems, and mission-critical applications.
Example:
Figure 1-14: An enterprise network.
ACTIVITY 1-2
Identifying Network Categories
Scenario:
In this activity, you will identify the primary categories of networks.
1.
Ristell & Sons Publishing has a remote office that accesses its corporate office with
relatively high bandwidth. Which network category does it use?
a) LAN
b) WAN
c) CAN
d) MAN
Lesson 1: Network Theory
15
Copyright В© Element K Corporation
LESSON 1
2.
InfiniTrain occupies four floors in the East building of the River View Business Complex. What category does this network fit into?
a) LAN
b) WAN
c) CAN
d) MAN
3.
This figure represents a company with a central office, an attached warehouse, and a
remote supplier. Which portions of the network are LANs?
a) Section CвЂ”Tampa Headquarters
b) Section AвЂ”Tampa Headquarters and Tampa Warehouse
c) Section BвЂ”Tampa Warehouse and London Supplier
4.
This figure represents the same small company with a central office, an attached
warehouse, and a remote sales office. Which portion of the network is a WAN?
a) Section AвЂ”Tampa Headquarters
b) Section BвЂ”Tampa Headquarters and Tampa Warehouse
c) Section CвЂ”Tampa Warehouse and Boston Sales Office
CompTIAВ® Network+В® (Exam N10-005)
16
Copyright В© Element K Corporation
LESSON 1
5.
Which network employs elements of both local and wide area networks?
a) Metropolitan area network
b) Personal area network
c) Campus area network
d) Enterprise network
TOPIC C
Standard Network Models
Up to this point, you have identiп¬Ѓed the primary categories that describe the size and extent of
a network. For every network deployed, the actual model of the network will depend on the
individual networkвЂ™s requirements that the network is designed to cater. In this topic, you will
identify the standard networking models currently in use.
As a networking professional, you will need to work in a variety of network environments that
use different technologies, implementation designs, and models. The model to be used is a
result of an analysis of requirements, connectivity methods, and technologies that are being
used. Some of these models might be more prevalent than others, and you need to understand
the different network models you might encounter.
Network Models
Deп¬Ѓnition:
A network model is a design speciп¬Ѓcation for how the nodes on a network are constructed to interact and communicate. A network model determines the degree to which
communications and processing are centralized or distributed.
There are three primary network models:
вЂў
Centralized or hierarchical
вЂў
Client/server
вЂў
Peer-to-peer
Example:
Figure 1-15: A centralized network.
Lesson 1: Network Theory
17
Copyright В© Element K Corporation
LESSON 1
Segments
Deп¬Ѓnition:
A segment is a physical subdivision of a network that links a number of devices, or
serves as a connection between two nodes. A segment is bounded by physical
internetworking devices such as switches and routers. All nodes attached to a segment
have common access to that portion of the network.
Example:
Figure 1-16: Segments of a network.
Segmenting for Performance
Dividing a network into segments can improve network performance. With segments,
traffic is conп¬Ѓned to a portion of the network containing nodes that communicate with
each other most often. However, performance can suffer if nodes must regularly communicate with nodes on other segments. Devices such as switches and routers that link
segments can lead to slower transmission between segments.
Centralized Networks
Deп¬Ѓnition:
A centralized network is a computer network in which a central host computer controls
all network communication, and performs data processing and storage on behalf of
clients. Users connect to the host via dedicated terminals or terminal emulators. Centralized networks provide high performance and centralized management, but they are
expensive to implement.
The terms вЂњhierarchical networkвЂќ and вЂњhost-based networkвЂќ can also be used to describe centralized
networks.
CompTIAВ® Network+В® (Exam N10-005)
18
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-17: A centralized computer network.
Decentralized Networks
A pure centralized network is rare in todayвЂ™s environment. Most of the network types
you encounter will be decentralized to some extent, with the client/server architecture
having some degree of centralization, and the peer-to-peer architecture being almost
purely decentralized. In a decentralized network, each peer can connect directly with
other peers without being managed by a central server. A server provides services to
the nodes upon a request from them. A peer-to-peer network is an example of a decentralized network.
Client/Server Networks
Deп¬Ѓnition:
A client/server network is a network in which servers provide resources to clients.
Typically, there is at least one server providing central authentication services. Servers
also provide access to shared п¬Ѓles, printers, hardware storage, and applications. In
client/server networks, processing power, management services, and administrative
functions can be concentrated where needed, while clients can still perform many basic
end-user tasks on their own.
Lesson 1: Network Theory
19
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-18: Clients and a server in a client/server network.
Peer-to-Peer Networks
Deп¬Ѓnition:
A peer-to-peer network is a network in which resource sharing, processing, and communications control are completely decentralized. All clients on the network are equal
in terms of providing and using resources, and each individual workstation authenticates its users. Peer-to-peer networks are easy and inexpensive to implement. However,
they are only practical in very small organizations, due to the lack of centralized data
storage and administration. A peer-to-peer network is more commonly referred to as a
workgroup. In a peer-to-peer network, user accounts must be duplicated on every
workstation from which a user accesses resources. Such distribution of user information makes maintaining a peer-to-peer network difficult, especially as the network
grows.
Example:
Figure 1-19: Computers in a peer-to-peer network.
CompTIAВ® Network+В® (Exam N10-005)
20
Copyright В© Element K Corporation
LESSON 1
Mixed Mode Networks
Deп¬Ѓnition:
A mixed mode network incorporates elements from more than one of the three standard
network models. Some mixed mode networks consist of a client/server network combined with a centralized mainframe. An end userвЂ™s workstation functions as a client to
the network directory server, and employs terminal emulation software to authenticate
to the host system.
Example:
A common example of a mixed mode network is a workgroup created to share local
resources within a client/server network. For example, you might share one clientвЂ™s
local printer with just a few other users. The client sharing the printer on the network
does not use the client/server networkвЂ™s directory structure to authenticate and authorize access to the printer.
Example:
Figure 1-20: A mixed mode network.
Lesson 1: Network Theory
21
Copyright В© Element K Corporation
LESSON 1
ACTIVITY 1-3
Identifying the Standard Network Models
Scenario:
In this activity, you will identify the standard network models.
1.
On your network, users access a single host computer via a terminal for all of their
data processing and storage. Which network model does your network use?
a) Peer-to-peer
b) Mixed mode
c) Client/server
d) Centralized
2.
On your network, users directly share files stored on their computers with other users.
Additionally, they access shared storage, printing, and fax resources, which are connected to a department-wide server. Which network model does your network use?
a) Peer-to-peer
b) Client/server
c) Centralized
d) Mixed mode
3.
Match the network model with its description.
Centralized
a.
Client/server
Peer-to-peer
Mixed mode
Nodes can perform basic end-user
tasks on their own, but depend on
another network resource for
advanced processing tasks.
b. Resource sharing, processing, and
communications control are completely decentralized.
c. A host computer performs data processing and storage on behalf of
clients.
d. Displays characteristics of more than
one of the three standard network
models.
CompTIAВ® Network+В® (Exam N10-005)
22
Copyright В© Element K Corporation
LESSON 1
4.
Rudison Technologies Ltd. has four employees who need to share information and
hardware such as a scanner and printer. They also need Internet access. None of the
users have advanced computing skills. Which type of network would best suit their
needs?
a) Client/server
b) Peer-to-peer
c) Centralized
d) Mixed mode
TOPIC D
Physical Network Topologies
In the previous topic, you identiп¬Ѓed the various network models. Now you are ready to see
how these components can combine to create large structural units called network topologies.
In this topic, you will identify the primary physical network topologies.
Network topologies inп¬‚uence the п¬‚ow of data through a network and the design of communication protocols to a large extent. Getting to know the different topologies is essential to
design or troubleshoot a network. Knowledge of the physical topology of a network is critical
for you to be able to successfully execute many network management tasks including fault
monitoring and problem isolation. No matter what your role, you will need to understand the
characteristics of the network topology you are working with, and identify how the topology
affects the network performance and troubleshooting.
Topology
Deп¬Ѓnition:
A topology is a network speciп¬Ѓcation that determines the networkвЂ™s overall layout, signaling, and data-п¬‚ow patterns. A physical topology describes a networkвЂ™s physical
wiring layout or shape, while a logical topology describes the paths through which
data moves. The physical and logical topologies can be different for a network. Common physical topologies include a star, ring, mesh, tree, and bus.
Lesson 1: Network Theory
23
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-21: Physical and logical topologies on the same network can differ.
Point-to-Point Connections
Deп¬Ѓnition:
A point-to-point connection is a direct connection between two nodes on a network.
One node transmits data directly to the other. Modern point-to-point connections
implementations are present for both wired and wireless connections, including microwave and laser links, as well as Ethernet and coaxial cables. Wireless point-to-point
connections often do not work if there are any obstacles in the path between endpoints
to establish a good connection.
Example: Direct Connection Between Two Computers
Connecting one hostвЂ™s Network Interface Card (NIC) directly to another hostвЂ™s NIC
with a Cat5 crossover cable is an example of a point-to-point connection.
Figure 1-22: A point-to-point connection between two computers.
Multipoint Connections
Deп¬Ѓnition:
Multipoint connections are connections between multiple nodes. Each multipoint connection has more than two endpoints. A signal transmitted by any device on the
medium is not private. All devices that share the medium can detect the signal but they
do not receive it unless they are the recipients.
Example:
Multipoint connections are the most common way to physically connect a network.
Physical bus and star networks are examples of multipoint connections.
CompTIAВ® Network+В® (Exam N10-005)
24
Copyright В© Element K Corporation
LESSON 1
Radiated Connections
Deп¬Ѓnition:
A radiated, or broadcast connection is a wireless point-to-point or multipoint connection between devices. Wireless LAN, infrared, and Wi-Fiв„ў networks are all radiated
connections.
Example: Wi-Fi
Wi-Fi is a brand name promoted by the Wi-Fi Alliance for WLANs. Wireless radio
communications following the IEEE 802.11, or Wi-Fi, standard are the most common
choice for ordinary wireless LAN connectivity for portable computers inside homes,
offices, and increasingly, public buildings. Choose Wi-Fi when you need to connect
portable computer systems to a wired or wireless LAN. Wi-Fi enables users to move
from place to place freely without a line of sight connection to the access point. Wi-Fi
provides good performance within the wireless access point coverage area, barring any
signal interference.
Figure 1-23: A radiated connection with a wireless router.
The Physical Bus Topology
Deп¬Ѓnition:
A physical bus topology is a network topology in which the nodes are arranged in a
linear format, and a T-connector connects each node directly to the network cable. The
cable is called the bus and serves as a single communication channel. Signals can
reп¬‚ect off the ends of the cable, so you must install 50 ohm terminators to prevent this
reп¬‚ection. Attaching a terminator at both ends of the network cable prevents a condition called signal bounce, in which signals endlessly move from one end of the wire to
the other. Terminators impede or absorb signals so they cannot reп¬‚ect onto the wire.
You must ground a bus network on one end to reduce static electricity.
Disadvantages of the Bus Topology
The bus topology has a few disadvantages. A bus network:
вЂў
Is easy to implement but can be unreliable, because the entire bus fails if there is
a break in the network cable.
вЂў
Cannot support multiple pairs of terminals at the same time.
вЂў
Transmits data slower than the other topologies as only two nodes can communicate at any time.
Lesson 1: Network Theory
25
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-24: A physical bus topology.
Data Transmission on a Bus
On a bus, as all communication takes place through the same path, only a single pair of terminals can communicate at a time. Data is transmitted on a bus in a sequence of steps:
1. Each node on a bus listens passively to the channel until it receives a signal. The data
signal passes by every node, but not through the node.
2.
The node transmits data when the bus is free, and the allocation of the channel to nodes
is done on a п¬Ѓrst-come, п¬Ѓrst-serve basis.
3.
When a node is ready to transmit data to another node, it sends out a broadcast alert to
inform all other nodes that a transmission is being done. This is to avoid a collision of
data packets from multiple users on the bus.
4.
If two nodes try to transmit data at exactly the same time, a collision occurs on the wire.
Each node waits a random period of time before retransmission.
5.
The destination node picks up the transmission.
6.
If none of the nodes accept the transmitted data, such as in the case of the destination
node being switched off, the data packet is terminated by the bus itself.
Figure 1-25: Data transmission on a bus.
CompTIAВ® Network+В® (Exam N10-005)
26
Copyright В© Element K Corporation
LESSON 1
The Physical Star Topology
Deп¬Ѓnition:
A physical star topology is a network topology that uses a central connectivity device,
such as a switch, with individual physical connections to each node. The individual
nodes send data to the connectivity device, and the device then either forwards data to
the appropriate destination node, as in the case of a switch, or simply passes it through
to all attached nodes, as in the case of a hub. Star topologies are reliable and easy to
maintain as a single failed node does not bring down the whole network. However, if
the central connectivity device fails, the entire network fails.
Example:
Although star topologies are extremely common in client/server networks, a host-based
computing system is a classic example of a physical star topology. Each node has a
connection to the host computer and is not aware of other nodes on the network.
Figure 1-26: A physical star topology.
The Physical Ring Topology
Deп¬Ѓnition:
A physical ring topology is a network topology in which each node is connected to the
two nearest nodes: the upstream and downstream neighbors. The п¬‚ow of data in a ring
network is unidirectional to avoid collisions. All nodes in the network are connected to
form a circle. There is no central connecting device to control network traffic, and each
node handles all data packets that pass through it. Data moves in one direction through
each node that scans data packets, accepts packets destined for it, and forwards packets
destined for another node.
Each node in the ring topology acts as a repeater and boosts the signal when it retransmits the data packet. This boost in the signal ensures that the signal quality is high.
Ring topologies are potentially unreliable as the failure of a single node can bring
down the entire network.
Lesson 1: Network Theory
27
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-27: A physical ring topology.
Example: The Dual Ring Topology
A variant of the ring topology is the dual ring topology, which allows the use of two
rings with each ring carrying data in opposite directions. Dual ring conп¬Ѓgurations are
faster as data can be sent through the shortest path between a sender and the receiver.
It is a more reliable topology because in case of a breakage in the inner or outer ring,
the topology automatically reconп¬Ѓgures to a single ring data п¬‚ow, thus reducing down
time on the network.
The Physical Mesh Topology
Deп¬Ѓnition:
A physical mesh topology is a network topology in which each node is directly connected to every other node, similar to the physical point-to-point topology. This
conп¬Ѓguration allows each node to communicate with multiple nodes at the same time.
Since all nodes have dedicated links with other nodes, there is no congestion on the
network and data travels very fast. Because no node can be isolated from the network,
this topology is extremely reliable. It is also difficult to implement and maintain
because the number of connections increases exponentially with the number of nodes.
Mesh topologies typically provide reliable communications between independent networks.
The Partial Mesh Topology
The partial mesh topology is a variation of the mesh topology in which only a few
nodes have direct links with all the other nodes. This differentiates it from the full
mesh topology in which all nodes have direct links with others. It is less complex, less
expensive, and contains less redundancies than a full mesh topology. A partial mesh
topology is commonly used in subnetworks of large networks where the number of
users is low and lower data transfer rates can be used.
Example: Mesh Topology on the Internet
The connections between major divisions of the Internet use a mesh topology.
CompTIAВ® Network+В® (Exam N10-005)
28
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-28: A representation of the physical mesh topology.
The Physical Tree Topology
Deп¬Ѓnition:
A physical tree topology is a network topology in which a central, or root node is hierarchically connected to one or more second-level nodes, which are one level lower in
the hierarchy. The root node has a point-to-point link with each of the second-level
nodes, while each of the second-level nodes is connected to one or more third-level
nodes via a point-to-point link. The root node is the only node that has no other node
above it in the hierarchy. Each node in the network has the same number of lowerlevel nodes connected to it; this number is referred to as the branching factor of the
hierarchical tree.
Example:
Figure 1-29: A physical tree topology with a branching factor of 3.
Lesson 1: Network Theory
29
Copyright В© Element K Corporation
LESSON 1
Hybrid Topologies
Deп¬Ѓnition:
A hybrid topology is any topology that exhibits the characteristics of more than one
standard topology. Each section of the network follows the rules of its own topology.
Hybrid topologies can be complex to maintain because they typically incorporate a
wide range of technologies. Most of the large networks consist of several smaller subnetworks, and each subnetwork may have a different topology.
Example: Common Hybrid Topologies
Two common hybrid topologies are the star bus and the star ring. The star bus topology connects several star networks to a network backbone in a bus layout. The star
ring connects several ring networks to a central device in a star conп¬Ѓguration. Data is
sent in a circular pattern around the star conп¬Ѓguration.
Hybrid topologies are typically not designed as such. They usually arise when administrators connect
existing network implementations independently using different topologies.
Figure 1-30: The star bus topology connects star networks to a bus.
Types of Hybrid Topologies
There are other types of hybrid topologies on a network.
Hybrid Topology
Formed By
Star-bus
Linking the central nodes of some star networks using a common bus. Inside
each subnetwork, data will п¬‚ow similar to a star network and each of these star
networks will be treated as a node on the larger bus network. To move data from
one subnetwork to another, it has to be placed on the common bus.
Star-of-stars
Connecting the central nodes of two or more star networks with a new common
node. To move data from one subnetwork to another, it must be routed through
the new common node.
Star-ring
Connecting the central nodes of multiple star networks in a ring. The data п¬‚ow
between different subnetworks is through this ring.
CompTIAВ® Network+В® (Exam N10-005)
30
Copyright В© Element K Corporation
LESSON 1
ACTIVITY 1-4
Identifying Physical Network Topologies
Scenario:
In this activity, you will identify the different physical network topologies.
1.
True or False? A physical topology describes the data flow patterns on a network.
True
False
2.
3.
Match the physical network topology with its description.
Bus
a.
Star
Ring
b.
c.
Mesh
d.
Hybrid
e.
Network nodes have a direct connection to every other node.
Network nodes connect in a circle.
Network nodes are arranged in a linear format.
Network nodes connect to a central
connectivity device.
Exhibits the characteristics of more
than one standard topology.
Which physical network topology connects each node to both its upstream and downstream neighbors?
a) Star
b) Bus
c) Tree
d) Ring
4.
Which of these statements are valid with respect to the bus topology?
a) All nodes in the network are connected to a common transmission path.
b) Multiple pairs of nodes can communicate at a time.
c) It requires less cabling than other topologies.
d) Data transmission is slower than other topologies.
5.
In which network connection type can all the devices detect the signal transmitted on
the medium?
a) Point-to-point
b) Radiated
c) Multipoint
Lesson 1: Network Theory
31
Copyright В© Element K Corporation
LESSON 1
TOPIC E
Logical Network Topologies
In the previous topic, you identiп¬Ѓed the physical network topologies. Because the path of data
п¬‚ow does not always correspond to the physical wiring layout of the network, you also need to
consider how logical data paths work. In this topic, you will identify logical network topologies.
You may be faced with a situation where you need to troubleshoot a logical segment of your
network and ensure the п¬‚ow of data between two links when the physical topology seems just
п¬Ѓne. Logical network topologies provide information that physical topologies do not provide
such as the data transmission path between a sender and a receiver and the different places in
which this path converges or diverges. This information will also help you plan the transmission links and resource sharing capabilities and identify network routes apart from
troubleshooting.
The Logical Bus Topology
Deп¬Ѓnition:
A logical bus topology is a network topology in which nodes receive the data transmitted all at the same time, regardless of the physical wiring layout of the network. In a
logical bus with the physical star topology, even though nodes connect to a central
switch and resemble a star, data appears to п¬‚ow in a single, continuous stream, from
the sending node to all other nodes through the switch. As the transmission medium is
shared, only one node can transmit at a time.
Example:
Figure 1-31: A logical bus topology.
CompTIAВ® Network+В® (Exam N10-005)
32
Copyright В© Element K Corporation
LESSON 1
The Logical Ring Topology
Deп¬Ѓnition:
A logical ring topology is a network topology in which each node receives data only
from its upstream neighbor and retransmits data only to its downstream neighbor,
regardless of the physical layout of the network. However, a logical ring must be used
with a pure or hybrid physical ring topology such as star-ring. Although nodes might
be connected to a central device in a star layout, data moves through the network in a
circle until it reaches the original transmitting node, which then removes the data from
the ring.
Example:
Figure 1-32: A logical ring topology.
The Logical Star Topology
Deп¬Ѓnition:
A logical star topology implementation is less common than a logical ring or a logical
bus. In a logical star topology, although all nodes are wired onto the same bus cable, a
central device polls each node to check to see if it needs to transmit data. The central
device also controls how long a node has access to the cable. A multiplexer (mux)
manages individual signals and enables them to share the media.
Lesson 1: Network Theory
33
Copyright В© Element K Corporation
LESSON 1
Example:
Figure 1-33: A multiplexer managing signaling between nodes in a logical star
topology.
ACTIVITY 1-5
Identifying Logical Network Topologies
Scenario:
In this activity, you will identify logical network topologies.
1.
In which logical network topology do nodes receive the data transmitted simultaneously, regardless of the physical wiring of the network?
a) Bus
b) Star
c) Ring
2.
In which of the logical topologies does a node receive data only from its upstream
neighbor and retransmit the data only to its downstream neighbor?
a) Star
b) Bus
c) Ring
3.
In which logical network topology does a central device poll nodes and control access
to the channel?
a) Bus
b) Ring
c) Star
CompTIAВ® Network+В® (Exam N10-005)
34
Copyright В© Element K Corporation
LESSON 1
Lesson 1 Follow-up
In this lesson, you identiп¬Ѓed the basic components of the current networking theory. Any network you encounter will utilize some of these basic networking components and concepts. You
need to understand these fundamentals in order to succeed in your professional networking
career.
1.
In your opinion, what are the considerations for choosing between the different
topologies to implement in your network?
2.
Describe any background experience you have working with LANs, WANs, or other
types of networks.
Lesson 1: Network Theory
35
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
36
Copyright В© Element K Corporation
LESSON 2
LESSON 2
Lesson Time
1 hour(s), 25 minutes
Network Communications
Methods
In this lesson, you will identify the major network communications methods.
You will:
вЂў
Identify the primary data transmission methods on a network.
вЂў
Identify media access methods and their characteristics.
вЂў
Identify the major network signaling methods.
Lesson 2: Network Communications Methods
37
Copyright В© Element K Corporation
LESSON 2
Introduction
In the previous lesson, you learned about the basic network components and topologies. All of
these network types employ a set of communications methods to transmit data. In this lesson,
you will identify the primary transmission, media access, and signaling methods that networks
use to communicate.
The essence of networking is communicationвЂ”sending data from node to node for sharing
between users and systems. The methods a network uses to communicate are vital to its proper
functioning. Just like humans use different languages for communication, networks often use
different communication methods to talk to one another. Understanding the language you need
to use for communication is essential to be able to communicate. By the same token, understanding these basic communication methods will be critical to your success as a networking
professional.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂ”
1.3 Explain the purpose and properties of IP addressing.
вЂ”
3.7 Compare and contrast different LAN technologies.
Topic B:
вЂ”
3.7 Compare and contrast different LAN technologies.
TOPIC A
Data Transmission Methods
With the network in place, the next step is to identify methods to transmit data. In this topic,
you will identify the primary data transmission methods.
As a network professional, you will probably be expected to monitor network performance and
response time. The manner in which data is transmitted between nodes on a network can signiп¬Ѓcantly impact network traffic and performance. You will need to understand the
characteristics and potential effects of the transmission methods, which are implemented on the
networks you support to understand their impact on the network.
Data Transmission
Deп¬Ѓnition:
Data transmission is the exchange of data among different computers or other electronic devices through a network. Unlike telephony, which involves only transmission
of voice, data transmission sends non-voice information such as graphics, animations,
audio, text, and video over the network. Most of the data transmission takes place
through computer networks and the term data networks is synonymous with computer
networks.
CompTIAВ® Network+В® (Exam N10-005)
38
Copyright В© Element K Corporation
LESSON 2
Example:
Figure 2-1: Data communication on a computer network.
Instantaneous Data Transfer
Though data is typically stored as п¬Ѓles before being transmitted, there are exceptions
to this process. In some forms of data communication, such as online chat or video
conferencing, data needs to be transmitted as soon as it is generated. In such cases,
data is immediately converted into a network-compatible format and transmitted without being stored either in main memory or on a disk.
Digital Data Transmission
Digital data transmissions use voltage differences to represent the 1s and 0s in data. Unlike
analog signal transmission, they are not modulated over a carrier. On-off keying or Manchester
encoding converts data into a digital waveform. Each bit takes a predeп¬Ѓned time to transmit,
and the sender and receiver synchronize their clocks either by transmitting a bit pattern or by
monitoring for the reception of the п¬Ѓrst bit.
Figure 2-2: Digital data transmission using on-off keying.
On-Off Keying
On-off keying is a digital data transmission encoding scheme in which a change in
voltage from one state to another within a predetermined interval is symbolized by a 1.
No voltage transition is symbolized by a 0. The receiver synchronizes its clock with
the sender by watching for 1s.
Variations of this scheme are called Non-Return to Zero (NRZ) and Non-Return to Zero
Inverted (NRZI) encoding. On-off keying is used over serial ports and other relatively
low-speed digital data connections.
Lesson 2: Network Communications Methods
39
Copyright В© Element K Corporation
LESSON 2
Because the receiver synchronizes its clock by watching for 1s, problems can arise
when long sequences of 1s or 0s must be sent. The receiver may not be able to synchronize its clock for a long interval. With its clock out of sync, the receiver could
incorrectly decipher how many 1s or 0s have been transmitted, leading to data corruption.
Manchester Encoding
Manchester encoding was developed as a way to overcome the limitations of on-off
keying. The transition from positive to ground represents a binary 0 and a negative to
positive voltage transition in the middle of the bit period designates a binary 1. Thus,
every bit involves a voltage transition and the problem of transmitting a long string of
1s or 0s is eliminated. Manchester encoding is used over Ethernet and other high-speed
digital data connections.
Unicast Transmission
Deп¬Ѓnition:
Unicast transmission is a method for data transfer from a source address to a destination address. Network nodes not involved in the transfer ignore the transmission.
Unicast transmission is the predominant mode of transmission on LANs and the
Internet. Some familiar unicast applications are Hyper-Text Transfer Protocol (HTTP),
Simple Mail Transfer Protocol (SMTP), and File Transfer Protocol (FTP).
Example:
Figure 2-3: Data transfer in a unicast transmission.
Broadcast Transmission
Deп¬Ѓnition:
Broadcast transmission is a transmission method in which data is sent from a source
node to all other nodes on a network. Network services that rely on broadcast transmissions generate a great deal of traffic. Occasionally, nodes use broadcast
transmissions to check for the availability of a particular service on the network. If the
service is not available, the nodes broadcast a request for the service. If a server is
present, it responds to the request.
CompTIAВ® Network+В® (Exam N10-005)
40
Copyright В© Element K Corporation
LESSON 2
Example:
Some servers periodically advertise their presence to the network by sending a broadcast message.
Figure 2-4: Data transfer in a broadcast transmission.
Multicast Transmission
Deп¬Ѓnition:
Multicast transmission is a transmission method in which data is sent from a server to
speciп¬Ѓc nodes that are predeп¬Ѓned as members of a multicast group. Network nodes not
in the group ignore the data. Communication with nodes outside of a multicast group
must be done through unicast or broadcast transmissions.
Example: Television Signal Transmissions
A video server transmitting TV signals is an example of multicast transmission.
Example:
Figure 2-5: Data transfer in a multicast transmission.
Lesson 2: Network Communications Methods
41
Copyright В© Element K Corporation
LESSON 2
Serial Data Transmission
With serial data transmission, the transmission of bits occurs as one per clock cycle, across a
single transmission medium. Transmission of synchronization, start/stop, and error correction
bits occurs along with data bits, thus limiting the overall throughput of data. Serial data transmission does not use DC pulses for transmission. Serial transmission can delineate bytes by
using either synchronous or asynchronous techniques. Many common networking systems,
such as Ethernet, use serial data transmission. Keyboards, mice, modems, and other devices
can connect to your PC over a serial transmission port.
A clock cycle refers to the processing speed of a CPU.
Figure 2-6: Serial transmission being sent in sequence bitwise.
Synchronous vs. Asynchronous Communications
The receiver of an analog signal must have a way of delineating between bytes in a
stream of data. This can be done using either asynchronous or synchronous techniques.
With asynchronous communications, a sender inserts special start and stop bit patterns
between each byte of data. By watching for these bit patterns, the receiver can distinguish between the bytes in the data stream.
With synchronous communications, a byte is sent after a standardized time interval.
The receiver assumes that one byte is transmitted every interval. However, the two
devices must start and stop their reckoning of these intervals at precisely the same
time. Synchronous devices include a clock chip. A special bit pattern is inserted at speciп¬Ѓc intervals in the data stream, enabling the receiving device to synchronize its clock
with the sender. After synchronizing the clocks, a receiver can use the predetermined
time interval as a means to distinguish between bytes in the data stream.
Parallel Data Transmission
With parallel data transmission, transmission of multiple bits takes place by using multiple
transmission lines. Many bitsвЂ”even multiple bytesвЂ”can be transferred per clock cycle. Transmission of synchronization, start/stop, and error correction bits does not occur along with data
bits. They are often sent over additional transmission lines, thus improving the overall throughput of data. Parallel transmission is commonly used on the parallel port on your computer, to
which you can connect printers or scanners. Other uses include the system bus inside your PC,
the Small Computer System Interface (SCSI) data bus, and the PC Card bus.
CompTIAВ® Network+В® (Exam N10-005)
42
Copyright В© Element K Corporation
LESSON 2
Figure 2-7: Parallel transmission occurs simultaneously across separate channels.
Baseband Transmission
In baseband transmissions, digital signals are sent via direct current (DC) pulses over a single,
unmultiplexed signal channel. As all devices share a common transmission channel, they can
send and receive over the same baseband medium, but they cannot send and receive simultaneously. Multiple baseband signals can be combined and sent over a single medium using a
communication channel that is divided into discrete time slots.
Figure 2-8: Data transfer in baseband transmission.
Broadband Transmission
Broadband transmission uses analog signaling to send data over a transmission medium using
the complete bandwidth of the medium. Devices cannot send and receive over the same broadband channel; thus signals travel unidirectionally. Multiple broadband signals can be combined
and sent over multiple frequencies, or channels, over a single network medium.
Figure 2-9: Data transfer in broadband transmission.
Lesson 2: Network Communications Methods
43
Copyright В© Element K Corporation
LESSON 2
Broadband over Powerlines
Broadband over Powerlines (BPL) is a technology that allows broadband transmission
over domestic power lines. This technology aims to use the existing power infrastructure to deliver Internet access to remote areas at a rapid pace. BPL is yet to gain
widespread acceptance because of the potential signal interference with other data signals such as wireless transmission and radio waves.
The interference of BPL signals with radio waves affects radio operations, which are
the main source of communication during times of natural disaster. In addition, there
are concerns about the security of data when it is transmitted as plaintext using BPL,
because it is easy to detect and intercept data when the signal travels using a common
power source. Accepting and implementing BPL will require enhanced encryption and
other security measures.
ACTIVITY 2-1
Identifying Data Transmission Methods
Scenario:
In this activity, you will identify the primary data transmission methods.
CompTIAВ® Network+В® (Exam N10-005)
44
Copyright В© Element K Corporation
LESSON 2
1.
Identify the transmission method depicted in the graphic.
a) Unicast
b) Broadcast
c) Multicast
2.
True or False? Multicasting is more efficient in the use of network media than unicast
transmission when many clients need to receive communications from a server.
True
False
3.
Match the transmission method to its description.
Unicast
Broadcast
Multicast
4.
a. Transmission of data to all nodes.
b. Transmission of data to the intended
receiving device.
c. Transmission of data to a subset of
nodes.
Which transmission method allows digital signals to be sent as DC pulses over a single,
unmultiplexed signal channel?
a) Broadband
b) Parallel
c) Baseband
d) Serial
Lesson 2: Network Communications Methods
45
Copyright В© Element K Corporation
LESSON 2
5.
Which of these devices use serial data transmission?
a) Keyboard
b) Mouse
c) USB hard drive
d) Internal bus
6.
Match the data transmission method with its description.
Serial
a.
Parallel
b.
Baseband
c.
Broadband
d.
Digital
e.
Utilizes additional transmission lines
to improve the overall data throughput.
Combines multiple digital signals to
be sent over a single medium using a
time slot divided communication
channel.
Delineates bytes by using either synchronous or asynchronous techniques.
Uses voltage differences to directly
represent the data as 1s and 0s.
Uses analog signaling to send data
using the mediumвЂ™s entire bandwidth.
TOPIC B
Media Access Methods
In the previous topic, you identiп¬Ѓed the primary data transmission methods. The next component of network communication is media access. In this topic, you will identify common media
access methods.
Human communications follow unwritten rules that help everyone involved to hear and be
heard. Computers on a network must also follow rules so that every node has a fair chance to
communicate. As a network technician, you need to understand these media access methods so
you can choose the best one for your network, and also ensure that every node follows the
same access method.
Types of Media Access
Depending upon the traffic on the network media, a node can transmit data on a network. The
media access method determines whether or not a particular node can transmit data on the network at a given time. Media access methods fall into two categoriesвЂ”contention-based and
controlled. With contention-based or competitive media access, the nodes themselves negotiate
for media access time. With controlled or deterministic media access, a central device or system controls when and for how long each node can transmit.
CompTIAВ® Network+В® (Exam N10-005)
46
Copyright В© Element K Corporation
LESSON 2
Figure 2-10: Contention-based and controlled media access deployed on networks.
Comparing Media Access Categories
Deterministic access methods are beneп¬Ѓcial when network access is time critical. For
example, in an industrial setting, key control and safety equipment, such as п¬‚owshutoff sensors in chemical storage facilities, must have guaranteed transmission time.
Deterministic systems ensure that a single node cannot saturate the media; all nodes
get a chance to transmit data. However, they require additional hardware and administration to conп¬Ѓgure and maintain. Contention-based systems are simpler to set up and
administer, but timely media access is not guaranteed for any node.
Multiplexing
Deп¬Ѓnition:
Multiplexing is a controlled media access method in which a central device combines
signals from multiple nodes and transmits the combined signal across a medium. To
carry multiple signals, the medium or channel is separated logically into multiple,
smaller channels. Signals can be multiplexed using Time-Division Multiplexing (TDM)
or Frequency-Division Multiplexing (FDM). Both multiplexing techniques rely on a
central device, called a multiplexer, or mux, to manage multiplexing from the sending
end. At the receiving end, a demultiplexer, or demux, separates the signals.
TDM
In TDM, a communication channel is divided into discrete time slots. Each node on a
network is assigned a time slot, and each sender is given exclusive access to the
medium for a speciп¬Ѓc period of time. Nodes have exclusive access to the connection
between themselves and a mux for that period of time. The mux combines each nodeвЂ™s
signal, and in turn, sends the resulting combined signal over the primary network
medium. Using TDM, multiple baseband signals can be combined and sent over a
single medium.
Lesson 2: Network Communications Methods
47
Copyright В© Element K Corporation
LESSON 2
FDM
In FDM, data from multiple nodes is sent over multiple frequencies, or channels, using
a network medium. Nodes have exclusive access to the connection between themselves
and a mux. The mux includes each nodeвЂ™s signal onto its own channel, sending the
resulting combined signal over the primary network medium. Using FDM, multiple
broadband signals can be combined and sent over a single medium.
Example:
Figure 2-11: The multiplexed media access method.
Polling
Deп¬Ѓnition:
Polling is a controlled media access method in which a central device contacts each
node to check whether it has data to transmit. Each node is guaranteed access to the
media, but network time can be wasted if polling nodes have no data to transmit. The
polling process is repeated by giving each node access to the media until the media
reaches the node that needs to transmit data.
Example: Demand Priority
Demand priority is a polling technique in which nodes signal their stateвЂ”either ready
to transmit or idleвЂ”to an intelligent hub. The hub polls the state of each node and
grants permission to transmit. Additionally, a node can signal that its data is high priority. The hub will favor high-priority transmission requests. Safeguards in the protocol
prevent nodes from assigning every transmission request as high priority. This is done
by ensuring that each node has an equal opportunity to transmit and a node is not
allowed second normal transmission unless all nodes have completed their п¬Ѓrst normal
transmission.
The Institute of Electronic and Electronics Engineers (IEEE), which is an organization dedicated to
advancing theory and technology in the electrical sciences, has not standardized polling in general.
However, the IEEE 802.12 standard deп¬Ѓnes 100VG-AnyLAN, which uses a speciп¬Ѓc polling technique
called demand priority to control media access.
CompTIAВ® Network+В® (Exam N10-005)
48
Copyright В© Element K Corporation
LESSON 2
Figure 2-12: The polling media access method.
Managed Hubs
A managed hub is a type of hub that includes functions that enable you to monitor and
conп¬Ѓgure its operation. Typically, you connect to the hub using special software or via
a dedicated management port. Managed hubs are also called intelligent hubs.
CSMA/CD
CSMA/CD is the access method for Ethernet formalized in the 802.3 standard, a speciп¬Ѓcation issued by IEEE to
standardize Ethernet and expand it to include a wide range of cable media.
Carrier Sense Multiple Access/Collision Detection (CSMA/CD) is a contention-based media
access method used in Ethernet LANs to provide collision free data transfer over a medium.
Nodes can transmit whenever they have data to send. However, they must take steps to detect
and manage the inevitable collisions that occur when multiple nodes transmit simultaneously.
The busier a network becomes, the greater the probability of collisions, and the lower the
CSMA/CD efficiency.
There are п¬Ѓve steps involved in the CSMA/CD process.
Lesson 2: Network Communications Methods
49
Copyright В© Element K Corporation
LESSON 2
Figure 2-13: The CSMA/CD media access method.
Step
Description
Step 1: Data to transmit
A node has data to transmit.
Step 2: Check network
The node determines if the media is available by polling.
Step 3: Transmit
If available, the node transmits data. After transmission, it waits for
an acknowledgement from the receiving node, which indicates
whether or not the transmission was successful.
Step 4: Collision
The node checks the packet size to detect data fragments that indicate the occurrence of a collision.
Step 5: Wait
If a collision occurs, both transmitting devices wait for a random
backoff period (in milliseconds), before retransmitting data. The
nodes then repeat the process until successful.
Power Over Ethernet (PoE)
Power over Ethernet (PoE) has been п¬Ѓnalized as the 802.3af standard. The PoE standard speciп¬Ѓes a method for supplying electrical power over Ethernet connections. PoE
speciп¬Ѓes two device types: power sourcing equipment (PSE) and PDs (powered
devices). PSEs provide the power and PDs are those devices that receive the power
from the PSE. PoE requires CAT 5 or higher copper cable.
CompTIAВ® Network+В® (Exam N10-005)
50
Copyright В© Element K Corporation
LESSON 2
CSMA/CA
Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) is a contention-based media
access method that is primarily used in 802.11вЂ“based wireless LANs (WLANs). In CSMA/CA,
nodes can transmit whenever they have data to send. However, they take steps before they
transmit data to ensure that the media is not in use.
Figure 2-14: The CSMA/CA media access method.
The 802.11 standard is a family of speciп¬Ѓcations developed by the IEEE for wireless LAN technology.
Step
Description
Step 1: Data to transmit
A node has data to transmit.
Step 2: Check network
The node determines if the media is available by
polling.
Step 3: Jam signal
If available, the node transmits a jam signal, advertising its intent to transmit data.
Step 4: Wait
The node waits until all nodes have had time to
receive the jam signal.
Step 5: Transmit
The node transmits data.
Step 6: Monitor for jam signal
During transmission, the node monitors the media
for a jam signal from any other node that may
already be transmitting data. If a jam signal is
received, it stops transmitting and retries after a
random delay.
Lesson 2: Network Communications Methods
51
Copyright В© Element K Corporation
LESSON 2
Contention Domains
Deп¬Ѓnition:
A contention domain, also called a collision domain, is a contention-based network on
which a group of nodes are allowed to compete with each other for media access. This
competition results in collisions caused by frames that are transmitted simultaneously
by two or more nodes. Networking devices such as switches deп¬Ѓne the size of the contention domain. Dividing a large network of many nodes into smaller contention
domains reduces collisions, thus improving network performance.
Example:
Figure 2-15: Contention domains on a network.
Broadcast Domain
A broadcast domain is a logical area in a computer network where any node connected
to the network can directly transmit to any other node in the domain without having to
go through a central routing device. A broadcast domain refers to the set of devices
that receive a broadcast data frame originating from any device within a LAN segment
or subnet. Switches cannot determine the size of the broadcast domain. Routers can
determine the size of the broadcast domain.
Broadcast Domain vs. Collision Domain
Collision and broadcast domains primarily differ from the perspective of the size of the
domains. Multiple collision domains can make up a broadcast domain, but a broadcast
domain associates itself only with a single collision domain. Broadcast and collision
domains also differ in the way they affect performance on a network. All devices in a
broadcast domain receive broadcasts sent on the network. On a collision domain, an
increase in traffic results in a higher probability of collisions on the network. As broadcast domains generate a lot of network traffic, they work best in smaller domains.
CompTIAВ® Network+В® (Exam N10-005)
52
Copyright В© Element K Corporation
LESSON 2
ACTIVITY 2-2
Identifying Media Access Methods
Scenario:
In this activity, you will identify the main types of media access methods.
1.
2.
Match the media access method with its description.
Polling
a.
Multiplexing
b.
CSMA/CD
c.
CSMA/CA
d.
Token-based
e.
Devices check if the media is available and transmit; collisions are
detected.
Devices that possess a special packet
transmit, while all other devices wait
their turn.
Devices check media availability and
transmit a blocking signal before
transmitting data.
A central device asks each node, in
turn, if it has data to transmit.
Combines data from multiple devices
into a single signal.
Which of these statements describe contention-based media access?
a) Controls when a node can place data on a network.
b) Negotiates with devices for network access.
c) Performs better in smaller segments.
d) Performs predictable access of the network.
3.
What is the correct sequence of data transmission in the CSMA/CD media access
method?
Transmits the data.
Waits for a random backoff period.
Determines occurrence of a collision.
Determines if the media is available.
4.
Which statements are true of a contention domain?
a) Reduces the number of nodes that contend for media access.
b) Defines a group of nodes to be polled by a hub.
c) Groups nodes logically.
d) Eliminates collisions within the domain.
Lesson 2: Network Communications Methods
53
Copyright В© Element K Corporation
LESSON 2
5.
Which statements are true of multiplexing?
a) Both TDM and FDM rely on a demux, to manage multiplexing from the sending node.
b) A central device combines signals from multiple nodes.
c) The medium or channel is separated logically into multiple, smaller channels.
d) Signals can be multiplexed using TDM or FDM.
e) At the receiving node, a mux separates signals.
6.
True or False? CSMA/CA is a contention-based media access method primarily used in
802.11-based wireless LANs.
True
False
TOPIC C
Signaling Methods
In the previous topic, you identiп¬Ѓed common media access methods used in networks. Now
that you are aware of the media to be used, you need to investigate the different types of signaling. In this topic, you will identify the different signaling methods used in networks.
As a network professional, you will encounter different types of signals on the network. The
different signaling methods used have various advantages and limitations that will affect the
signaling on your network. You can choose the correct signal type for your requirements only
if you are aware of the characteristics of each signal type that you can use on networks. This
will ensure that you get the optimum result when using the signal type that you select.
Analog Signals
Deп¬Ѓnition:
A signal is data transmitted as electromagnetic pulses across a network medium. An
analog signal carries information as continuous waves of electromagnetic or optical
energy. In computer networking, electrical current commonly generates analog signals,
the intensity of which is measured in volts. An analog signal oscillates between maximum and minimum values over time and can take any value between those limits. The
size, shape, and other characteristics of the waveform describe the analog signal and
the information it carries.
CompTIAВ® Network+В® (Exam N10-005)
54
Copyright В© Element K Corporation
LESSON 2
Example:
Figure 2-16: An analog signal.
Analog Signal Characteristics
The characteristics of an analog signal can be described or categorized using some speciп¬Ѓc
terms.
Figure 2-17: Characteristics of an analog signal.
Term
Description
Amplitude
The distance of the crest or trough of a wave from the midpoint of the
waveform to its top or bottom. The amplitude is one half of the overall
distance from the peak to the trough of the wave.
Cycle
One complete oscillation of an analog signal.
Frequency
The number of complete cycles per second in a wave. It is measured in
hertz, which is one cycle per second. Frequency is also called the
period of the wave.
Phase
Is where a waveвЂ™s cycle begins in relationship to a п¬Ѓxed point. Thus,
two waves of the same frequency that begin at the same time are said
to be in phase. Two waves that either start at an offset from each other
or have different frequencies are out of phase.
Wavelength
The distance between two successive crests or troughs in a waveform.
Lesson 2: Network Communications Methods
55
Copyright В© Element K Corporation
LESSON 2
Oscilloscope
An oscilloscope is a device that plots the amplitude of an analog signal as a function
of time. Oscilloscopes display analog signals as sine wave-shaped plots. Typically, it
displays the output on a monitor, letting you view the shape of the signal in real time.
Originally, oscilloscopes used Cathode Ray Tube (CRT) monitors, but modern oscilloscopes use Liquid Crystal Display (LCD) and Light Emitting Diode (LED) monitors.
Sine Waves
A sine wave is a smoothly oscillating curve that is the result of calculating the sine of
the angles between zero and 360 and plotting the results. A sine wave can vary in
amplitude, phase, or frequency. A wave that follows a sine curve is said to be
sinusoidal.
Digital Signals
Deп¬Ѓnition:
A digital signal, unlike an analog signal that can have many possible values, can have
combinations of only two valuesвЂ”one and zero. These values represent the presence
and the absence of a signal, respectively. Digital data, which is a sequence of ones and
zeroes, can be translated into a digital waveform. In computer systems and other digital devices, a waveform can switch between two voltage levels: zero at the ground, or
a zero voltage state, and one at a positive or negative voltage level.
Example:
Figure 2-18: Waveform of a digital signal.
Binary Data and Digital Signals
Digital signals can hold just two values, and they are well-suited for encoding digital
data, which is simply a sequence of ones and zeros. Every pulse in a digital signal represents one binary digit, or bit. Eight bits constitute one byte.
Logical State
Digital data is transmitted as electrical pulses, which have either a high or low power
voltage levels. To represent the different voltage levels for mathematical reasons and to
describe the working of digital devices, digital data is represented as binary 1s and 0s,
also known as logical states.
CompTIAВ® Network+В® (Exam N10-005)
56
Copyright В© Element K Corporation
LESSON 2
Digital Data Units
Units of digital data are given speciп¬Ѓc names, as described in this table.
Unit
Description
Bit
A single 1 or 0
Nibble
Four bits
Byte
Eight bits
Word
Depends on the processor.
вЂў For a 16-bit processor, a word is 16 bits
вЂў For a 32-bit processor, a word is 32 bits
вЂў For a 64-bit processor, a word is 64 bits
Data Measurement Units
Exponential preп¬Ѓxes are commonly used when measuring data in bits and bytes.
Preп¬Ѓx
Value
kilo (k)
1000
mega (M)
1000000 (1000^2)
giga (G)
1000000000 (1000^3)
tera (T)
1000000000000 (1000^4)
peta (P)
1000000000000000 (1000^5)
Analog Signal Modulation and Demodulation
Analog signals generally transmit voice at low frequencies. Transmitting low frequency signals
directly may lead to information loss and interference from other signals. To overcome these
problems, analog signals are superimposed by a high frequency signal known as a base or carrier signal using a modulator. The lower frequency analog signal is superimposed over the
carrier signalвЂ™s waveform.
In modulation, upon adding a data signal, it modiп¬Ѓes one of the properties of the carrier
signalвЂ”either the amplitude, frequency, or phase. The carrier signal is constant, but after its
superimposition, it is shaped to represent the analog signal, resulting in a new signal that
includes properties of both the carrier and data signals. When the modulated signal reaches its
destination, the receiver decodes the signal by removing data from the carrier, using a process
called demodulation.
Lesson 2: Network Communications Methods
57
Copyright В© Element K Corporation
LESSON 2
Figure 2-19: Analog data signal modulation.
Advantages of Modulation
High frequency signals transmit well over long distances. In contrast, low frequency
signals degrade quickly with distance. By combining a low frequency data signal with
a high frequency carrier signal, data can be sent over longer distances with minimal
signal degradation.
Codecs and DACs/ADCs
A codec is software or hardware that encodes and decodes digital data to and from the
analog format. A modem is a type of codec; the speciп¬Ѓc chips that perform the digitalto-analog and analog-to-digital conversion are called Digital-to-Analog Codecs (DACs)
and Analog-to-Digital Codecs (ADCs), respectively.
Digital Signal Modulation and Demodulation
Digital data cannot be directly transmitted through a medium over a long distance. Digital signal modulation or encoding is the process of representing digital data in the form of an analog
signal for transmission of data between different digital devices. Digital data has only two
states represented as either 0 or 1. For example, a characteristic of the signal, such as frequency, is set to represent both 0 and 1. More frequency could be set for 1 and less for 0 or
vice versa.
For demodulation, the receiving digital device compares the modulated analog signal it
received with the preset frequency or amplitude of the signal and uses the comparison results
to reconstruct digital data. For example, if the receiving digital device encounters a high frequency and a low frequency signal, it reconstructs the signal as 1 and 0 in the digital format.
CompTIAВ® Network+В® (Exam N10-005)
58
Copyright В© Element K Corporation
LESSON 2
Figure 2-20: A reconstructed Digital Signal.
Modems
A modem is a device that modulates and demodulates digital data to an analog signal
that can be sent over a telephone line. Its name is a combination of modulate and
demodulate.
Digital Signal Modulation Techniques
There are various techniques to modulate digital data, and each of these techniques is
described in the following table.
Modulation Technique
Description
Amplitude Shift Key
(ASK) modulation
Changes the amplitude of the analog signal depending on the
logical state of digital data. The logical state of data can be either
0 or 1.
Frequency Shift Key (FSK)
modulation
Changes the frequency of the analog signal depending on the
logical state of digital data.
Binary-Phase Shift Key
(BPSK) modulation
Changes the phase of the analog signal depending on the logical
state of digital data.
Quadrature-Phase Shift
(QPSK) Key modulation
Changes the phase of the analog signal to represent two logical
states at a time. The logical states can be 00, 01, 10, and 11.
Quadrature Amplitude
Modulation (QAM)
Combines both amplitude and phase shift key modulations. This
helps represent more than two logical states at a time.
Digital Signal Reference Methods
To demodulate a digital signal, you must have a reference to determine the condition of the
signal. This demodulation can be done using one of two methods. In the п¬Ѓrst method, called
differential, a modem compares the modulated and demodulated digital signals; and the difference in output becomes the resulting data. With the second method, called single-ended, the
modem compares the signal on one line to ground. The difference from ground then becomes
the data output.
Lesson 2: Network Communications Methods
59
Copyright В© Element K Corporation
LESSON 2
Figure 2-21: Differential and single-ended demodulation.
ACTIVITY 2-3
Identifying Signaling Methods
Scenario:
In this activity, you will identify the major signaling methods used in data communication.
1.
Which numbering system are digital signals based on?
a) Hexadecimal
b) Binary
c) Decimal
d) Alphanumeric
2.
Which statements are true of digital signal modulation?
a) Digital data can be transmitted through over a long distance.
b) Digital data can have only two logical states.
c) Represents digital data in the form of analog signals.
d) Modifies a characteristic of the signal.
3.
True or False? In the single-ended reference method for demodulating a digital signal,
the demodulated signal is compared to ground and the difference becomes the output
data.
True
False
CompTIAВ® Network+В® (Exam N10-005)
60
Copyright В© Element K Corporation
LESSON 2
4.
What are the characteristics of analog signal modulation and demodulation?
a) Enables long distance data transmission.
b) Leads to information loss and interference from other signals.
c) Superimposes an analog signal and removes it from a high frequency analog carrier.
d) Modifies all properties of the data signal.
5.
Match the characteristic of an analog signal with its description.
Amplitude
a.
Cycle
Frequency
b.
c.
Phase
d.
Wavelength
e.
One complete analog signal oscillation.
The period of the wave.
The distance between two successive
crests or troughs in a waveform.
The distance from the crest or trough
of a wave to its top or bottom.
The beginning of a waveвЂ™s cycle in
relationship to a п¬Ѓxed point.
Lesson 2 Follow-up
In this lesson, you learned about the methods networking devices use to communicate to
ensure the proper functioning of your network. Now that you are cognizant of the methods
nodes use to transmit data to each other, you are well-positioned to choose the correct communication method for your network.
1.
What are the factors to consider when you need to use unicast, broadcast, or multicast
transmissions in your networking environment?
2.
In your opinion, what is the importance of knowing different signal types?
Lesson 2: Network Communications Methods
61
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
62
Copyright В© Element K Corporation
LESSON 3
LESSON 3
Lesson Time
3 hour(s), 15 minutes
Network Media and
Hardware
In this lesson, you will describe network media and hardware components.
You will:
вЂў
Identify the common types of bounded network media.
вЂў
Identify the common types of unbounded network media.
вЂў
Identify noise control methods used in network transmissions.
вЂў
Identify different network connectivity devices.
Lesson 3: Network Media and Hardware
63
Copyright В© Element K Corporation
LESSON 3
Introduction
In the previous lesson, you identiп¬Ѓed network data delivery methods. The network media and
hardware carry data packets from a source to a destination, and they need to function without
interruptions for data to travel reliably across the network. In this lesson, you will identify the
different types of media and networking devices that transmit data.
Networking media are like the highways and subways of a city. Without roads and rails,
people cannot move through a city to work or home. Without networking media and the
devices that support them, you cannot transmit data from one computer to another. For data to
travel successfully across your network, you must verify that the network media and devices
are compatible with one another and set up correctly for your particular network implementation.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂў
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.1 Categorize standard media types and associated properties.
вЂ”
3.2 Categorize standard connector types based on network media.
вЂ”
3.4 Categorize WAN technology types and properties.
вЂ”
3.8 Identify components of wiring distribution.
Topic B:
вЂ”
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
вЂ”
2.4 Given a scenario, troubleshoot common wireless problems.
вЂ”
3.4 Categorize WAN technology types and properties.
вЂ”
5.1 Given a scenario, implement appropriate wireless security measures.
Topic C:
вЂ”
вЂў
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
Topic D:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.4 Explain the purpose and properties of routing and switching.
вЂ”
1.9 Identify virtual network components.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
2.5 Given a scenario, troubleshoot common router and switch problems.
вЂ”
3.2 Categorize standard connector types based on network media.
CompTIAВ® Network+В® (Exam N10-005)
64
Copyright В© Element K Corporation
LESSON 3
TOPIC A
Bounded Network Media
In this lesson, you will identify various types of network media and devices. The network
media that carry data across your network can be bounded or unbounded. In this topic, you
will identify the most widely implemented network mediaвЂ”bounded.
Bounded media are the most basic networking media type and consist of different types that
can be chosen to suit the needs of your network. You are likely to work with bounded media
on a daily basis as part of your duties as a network professional. Understanding the characteristics of bounded media and the equipment used will enable you to properly install and service
your networks.
Network Media
Network media, the conduit through which signals п¬‚ow, can be either bounded or unbounded.
Bounded media use a physical conductor. This conductor can be a metal wire through which
electricity п¬‚ows, or a glass or plastic strand through which pulses of light п¬‚ow. Unbounded
media do not need a physical connection between devices, and can transmit electromagnetic
signals through air using radio waves, microwaves, or infrared radiation.
Figure 3-1: Types of network media.
Copper Media
Deп¬Ѓnition:
Copper media is a type of bounded media that uses one or more copper conductors
surrounded by an insulated coating. The conductors can be made from a solid wire or
from braided strands of wire. Sometimes shielding, in the form of a braided wire or
foil, is wrapped around one or more conductors to reduce signal interference from
nearby sources of electromagnetic radiation.
Lesson 3: Network Media and Hardware
65
Copyright В© Element K Corporation
LESSON 3
Example: Types of Copper Media
Two of the most prevalent types of copper media used in networks are twisted pair
and coaxial cable.
Twisted Pair Cables
Deп¬Ѓnition:
A twisted pair cable is a type of cable in which two conductors or pairs of copper
wires are twisted around each other and clad in a color-coded, protective insulating
plastic sheath or jacket to form a pair. All pairs are encased in a plastic sheath or
jacket. The number of pairs within a cable will vary depending on the type of twisted
pair cable. Twisted pair cables typically use shielding around pairs of wires.
Example:
Figure 3-2: Constituents of a twisted pair cable.
RJ-45 Connectors
RJ-45 is an eight-pin connector used by twisted pair cables in networking. All four
pairs of wires in the twisted pair cable use this connector.
The RJ in RJ-11 or RJ-45 is an abbreviation for вЂњregistered jack.вЂќ An RJ-45 connector can also be
called an 8P8C connector.
RJ-45 Wiring Schemes
There are two standard wiring schemes for RJ-45: T568A and T568B. It is important
that you use the wiring scheme that matches the devices on your network even though
all cables are the same.
Pin
T568A
T568B
1
White/green
White/orange
2
Green
Orange
3
White/orange
White/green
4
Blue
Blue
5
White/blue
White/blue
6
Orange
Green
CompTIAВ® Network+В® (Exam N10-005)
66
Copyright В© Element K Corporation
LESSON 3
Pin
T568A
T568B
7
White/brown
White/brown
8
Brown
Brown
Figure 3-3: Twisted pair connectors вЂ” RJ-45 wiring schemes.
The RJ-11 Connector
The RJ-11 connector is used with Category 1 cables in telephone system connections
and is not suitable for network connectivity. However, because the RJ-11 connector is
similar in appearance to the RJ-45 connector, they are sometimes confused. RJ-11 connectors are smaller than RJ-45 connectors, and have either four or six pins.
Twisted Pair Cable Types
A twisted pair cable can be of two types: Unshielded Twisted Pair (UTP) or Shielded Twisted
Pair (STP).
Twisted pair cables are available in 2вЂ“pair, 4вЂ“pair, 6вЂ“pair, 25вЂ“pair, 100вЂ“pair, and larger bundles.
Cable Type
Description
UTP
There are different characteristics of UTP:
вЂў Does not include shielding around its conductors
вЂў
вЂў
вЂў
вЂў
STP
Typically contains four pairs of stranded or solid conductors
Is inexpensive and reliable
Supports transmission distances of up to 100 meters
Supports data transfer rates of up to 1 Gbps
There are different characteristics of STP.
вЂў Includes foil wrapper shielding around its conductors to improve the
cableвЂ™s resistance to interference and noise.
вЂў
вЂў
вЂў
вЂў
Typically contains four pairs of stranded or solid conductors
More expensive than UTP
Supports transmission distances of up to 100 meters
Supports data transfer rates of 10 to 100 Mbps.
Lesson 3: Network Media and Hardware
67
Copyright В© Element K Corporation
LESSON 3
Color Schemes
The conductors in older twisted pair cables used a solid color scheme. Old telephone
cables used black, green, red, and yellow wires. The current color scheme uses striped
colors.
Wire colors are standardized. The industry standard for twisted pair is one solid color
and the same color with white. Consider the blue pair of wires: one wire will be
mostly blue with white stripes. It will be identiп¬Ѓed on wiring diagrams as the blue/
white wire. The corresponding wire in the pair will be mostly white with blue stripes,
and be identiп¬Ѓed as the white/blue wire.
The п¬Ѓrst four standard color pairs are listed in the table.
Primary Wire
Secondary Wire
White/blue
Blue/white
White/orange
Orange/white
White/green
Green/white
White/brown
Brown/white
In the solid color scheme, red corresponds to blue/white, green to white/blue, yellow to
orange/white, and black to white/orange.
Twisted Pair Cable Categories
A twisted pair cable comes in different grades, called categories, which support different network speeds and technologies.
Category
Speciп¬Ѓcations
1
Network Type: Voice transmission
Maximum Speed: 1 Mbps
CAT1 is not suitable for networking.
2
Network Type: Digital telephone and low-speed networks
Maximum Speed: 4 Mbps
CAT2 is not commonly used on networks.
3
Network Type: Ethernet
Maximum Speed: 10 Mbps
CAT3 is currently used for telephone wiring.
4
Network Type: IBM Token Ring
Maximum speed: 16 Mbps
CAT4 may also be used for 10 Mbps Ethernet.
5
Network Type: Fast Ethernet
Maximum Speed: CAT5 supports a signaling rate of 100 Mbps.
5e
Network Type: Gigabit Ethernet
Maximum Speed: CAT5e supports a signaling rate of 350 Mbps.
6
Network Type: Gigabit Ethernet
Maximum Speed: 1 Gbps
CAT6 supports a signaling rate of 250 MHz.
CompTIAВ® Network+В® (Exam N10-005)
68
Copyright В© Element K Corporation
LESSON 3
Category
Speciп¬Ѓcations
6a
Network Type: Gigabit Ethernet
Maximum Speed: 1 Gbps
CAT6a supports a signaling rate of 500 MHz.
7
Network Type: Gigabit Ethernet
Maximum Speed: 1+ Gbps
CAT7 supports a signaling rate of 1 GHz.
A twisted pair cableвЂ™s category is typically printed on the cable itself, making identiп¬Ѓcation easier.
Coaxial Cables
Deп¬Ѓnition:
A coaxial cable, or coax, is a type of copper cable that features a central conducting
copper core surrounded by an insulator and braided or foil shielding. The dialectric
insulator separates the conductor and shield and the entire package is wrapped in an
insulating layer called a sheath or jacket. The data signal is transmitted over the central
conductor. A coaxial cable is so named because the conductor and shield share the
same axis, or center. They share a common axis or are вЂњco-axial.вЂќ This arrangement
helps prevent electromagnetic interference from reaching the conductor.
Example:
Figure 3-4: Layers of a coaxial cable.
Coaxial Cable Types
Many varieties of coax cables are available not all of which are used in computer networking.
Cable Type
Characteristics
RG58/U
A 5 mm (0.25 inch) coax cable with a solid core and 50 ohms impedance.
RG58/U is used for Ethernet networking.
RG58A/U
A 5 mm (0.25 inch) coax cable with a stranded core and 50 ohms impedance.
RG58A/U is used for Ethernet networking.
RG8
A 10 mm (0.5 inch) coax cable with a solid core and 50 ohms impedance.
RG8 is used for Ethernet networking.
Lesson 3: Network Media and Hardware
69
Copyright В© Element K Corporation
LESSON 3
Cable Type
Characteristics
RG9
A 10 mm (0.5 inch) coax cable with a stranded core and 51 ohms impedance.
RG9 is used for cable television transmission and cable modems.
RG62
A 5 mm (0.25 inch) coax cable with a solid core and 93 ohms impedance.
RG62 is used for ARCNET networking.
RG59
A 6 mm (0.25 inch) coax cable with 75 ohms impedance.
RG59 is used for low-power video connections such as digital receivers.
RG6
A coax cable with 75 ohms impedance. RG6 is preferred over RG59.
This type of cable is often used in routing cable television signals.
Attached Resource Computer Network (ARCNET) is a LAN protocol widely used in microcomputers. It is similar
to other major LAN technologies such as Ethernet, token ring, and FDDI.
Solid and Stranded Cores
The wires used in networking can be of two types: solid core and stranded core. A
solid core wire is made of a single metal or a single strand. A stranded core wire consists of multiple strands or solid cores.
ThinNet
ThinNet is the name given to Ethernet networking over RG58/U or RG58A/U cabling.
ThinNet is wired in a bus conп¬Ѓguration in which segments can be up to 185 meters
(607 feet) long. ThinNet connections are made with a BNC connector. Devices connect
to the network with T-connectors and each end of the cable must be terminated with a
50-ohm resistor.
ThickNet
ThickNet is the name given to Ethernet networking over RG8 cabling. ThickNet is not
commonly used today, but was popular as a network backbone because ThickNet segments can be up to 500 meters (or 1640 feet) long.
Networking devices are not directly connected to the ThickNet cable. Instead, transceivers are connected to the cable with vampire taps, which is a clamshell-like device
that pierces an RG8 cable, to make contact with its conductors. This permits a networking device to connect to the ThickNet segment.
Transceivers can be installed as needed at intervals of 2.5 meters along the length of
the cable. The networking device connects to the transceiver via a 15-pin Attachment
Unit Interface (AUI) connector and a short section of cable called a drop cable. An
AUI connector is also known as a DIX connector, which gets its name from the three
companies that invented it: Digital Equipment Corporation (DEC), Intel, and Xerox.
Connections between ThickNet segments are made with a screw-type connector called
an N-connector. ThickNet segments must be terminated with a 50-ohm resistor.
Coaxial Connector Types
Connectors are metal devices that are located at the end of a wire. Coaxial connectors are used
to connect video equipment and network nodes in a LAN. Signals п¬‚ow from the wire to network devices through connectors. All connectors are metal plated and some of the metals used
are gold, silver, rhodium, nickel, or tin.
CompTIAВ® Network+В® (Exam N10-005)
70
Copyright В© Element K Corporation
LESSON 3
Two broad categories of connectors are typically used in coax cables: F and BNC connectors.
Connector Type
Characteristics
F
A coax connector type used with a 75-ohm cable to connect cable TV and
FM antenna cables. It comes in a secure screw-on form or as a nonthreaded slip-on connector.
BNC
A cable connector used to terminate a coaxial cable. It is usually used with
the RG58/U cable. A Bayone-Neill-Concelman (BNC) connector has a
center pin connected to the center cable conductor and a metal tube connected to the shield of the cable. A rotating ring outside the metal tube
locks the cable to the connector.
The types of BNC connectors include:
вЂў T-connectors
вЂў Barrel connectors
Coax cables are assigned a combination alphanumeric identity that indicates the size and electrical characteristics
of that type of cable.
The RG speciп¬Ѓcation codes come from their page numbers in the Radio Guide manual, the original military speciп¬Ѓcation (Mil-Spec) for coax cables, which are no longer in use. For example, the RG8 speciп¬Ѓcation appeared on
page 8.
Termination
Coax network segments must be terminated to prevent signal reп¬‚ections off the ends of
the cable. Cables are terminated by installing a resistor of an appropriate rating, typically 50 ohms, at either end of the cable.
Network Media Performance Factors
Several factors can affect the performance of network media.
Factor
Description
Noise
Electromagnetic interference that disrupts the signal. The signal to noise ratio
decreases as the transmitting distance increases.
Attenuation
The progressive degradation of a signal as it travels across a network medium.
This is usually caused by an increase of noise or a decrease in the strength of the
signal. The susceptibility to noise and attenuation depends on the types of media
used; some media types are more susceptible to attenuation. Attenuation can also
occur when the cable length exceeds the recommended length up to which signals
can travel without distortion.
Impedance
The opposition to the п¬‚ow of electricity in an AC circuit. Impedance is measured
in ohms (О©). An ohm is the value of electrical resistance through which one volt
will maintain a current of one ampere.
Lesson 3: Network Media and Hardware
71
Copyright В© Element K Corporation
LESSON 3
Media Converters
A media converter enables networks running on different media to interconnect and exchange
signals. Technically, a media converter is considered a transceiver because it transmits and
receives signals. To install a media converter, simply connect terminated ends of the two media
you want to bridge to the converter. You may need to provide electrical power to the converter,
but may not need any additional conп¬Ѓguration. Many converters are available that allow you to
convert from one media type to another.
Different types of converters are available in market.
Converter Type
Description
Multimode п¬Ѓber to Ethernet
Used to extend an Ethernet network connection over a
multimode п¬Ѓber backbone.
Fiber to Coaxial
Used to convert signals on п¬Ѓber to a coaxial cable.
Singlemode to multimode п¬Ѓber
Used to transmit multimode п¬Ѓber signals over singlemode п¬Ѓber
devices and links. It supports conversion between multimode
segments on a network that spans a wider coverage area.
Singlemode п¬Ѓber to Ethernet
Used to extend an Ethernet network connection over a
singlemode п¬Ѓber backbone.
Structured Cabling
The Telecommunications Industry Association (TIA) and the Electronic Industries Association
(EIA) developed the 568 Commercial Building Telecommunication Cabling standard. This standard deп¬Ѓnes the regulations on designing, building, and managing a cabling system that utilizes
structured cabling according to speciп¬Ѓed performance characteristics to create a system of uniп¬Ѓed communications.
Structured cabling is based on a hierarchical design that divides cabling into six subsystems.
Subsystem
Description
Entrance facilities
Contains the telecommunication service entrance to the building, campus-wide
backbone connections, and the interconnection to the local exchange carrierвЂ™s
telecommunication facilities. The network demarcation point is usually a foot
away from where the carrierвЂ™s facilities enter the building, but the carrier can
designate a different measurement, depending on the needs of the facility.
Backbone wiring
Provides connections between equipment rooms and telecommunication closets.
Backbone cabling runs through the п¬‚oors of the building via risers or across a
campus. The allowed distance measurements of this cabling depend on the type
of cable and the facilities it connects.
Equipment room
Provides the main cross-connection point for an entire facility. Also provides a
termination point for backbone wiring connected to telecommunication closets.
Telecommunications
closet
Houses the connection equipment for cross-connection to an equipment room
along with workstations in the surrounding area. It contains horizontal wiring
connections, and entrance facility connections. In an office building with multiple п¬‚oors, depending on the п¬‚oor plan, there can be as many
telecommunications closets as needed.
CompTIAВ® Network+В® (Exam N10-005)
72
Copyright В© Element K Corporation
LESSON 3
Subsystem
Description
Horizontal wiring
Runs from each workstation outlet to the telecommunication closet. The maximum allowed distance from the outlet to the closet is 295 feet. If patch cables
are used, an additional 20 feet is allowed both at the workstation and the telecommunication closet, but the combined length cannot be more than 33 feet.
Horizontal cabling speciп¬Ѓcations include:
вЂў Four-pair 100 ohms UTP cables
вЂў Two-п¬Ѓber 62.5/125 mm п¬Ѓber-optic cables
вЂў Multimode 50/125 mm multimode п¬Ѓber-optic cables
Work area
Consists of wallboxes and faceplates, connectors, and wiring used to connect
work area equipment to the telecommunications closet. It is required that a data
and voice outlet be available at each wallbox and faceplate.
TIA/EIA-568
Telecommunications Industry Association/Electronic Industries Association (TIA/EIA)
releases recommendations for how network media may best be installed to optimize
network performance. They include:
вЂў
568 C: This current release is the third in the 568 series. 568C deп¬Ѓnes the standards for commercial building cabling. It covers the exceptions and allowances
related to the commercial building cabling. It recognizes CAT6a as a media type.
It also deп¬Ѓnes the minimum bend radius for twisted-pair cables, both shielded and
unshielded. In addition, it speciп¬Ѓes the maximum untwist value for the CAT6a
cable termination.
вЂў
568 B: This earlier standard, in which some sections are now obsolete, deп¬Ѓnes the
standards for preferred cable types that provide the minimum acceptable performance levels including:
вЂ”
100 ohm twisted pair
вЂ”
STP
вЂ”
Optical п¬Ѓber
568 A: This obsolete standard deп¬Ѓned the standards for commercial buildings and cabling
systems that support data networks, voice, and video. It further deп¬Ѓned cable performance
and technical requirements.
Premise Wiring
Premise wiring is deп¬Ѓned as a hierarchical cable system architecture in which a Main CrossConnect (MCC) is connected via a star topology across backbone cabling to Intermediate
Cross-Connects (ICC) and Horizontal Cross-Connects (HCC). Telecommunications design traditions have used a similar topology, and many people refer to the cross-connects of premise
wiring by such nonstandard terms as distribution frames, Main Distribution Frames (MDFs),
Intermediate Distribution Frames (IDFs), and wiring closets.
Lesson 3: Network Media and Hardware
73
Copyright В© Element K Corporation
LESSON 3
Figure 3-5: Components used in premise wiring.
Many components are used in premise wiring.
Premise Wiring Component
Description
Drop cable
The wire that runs to a PC, printer, or other device connected to a network.
Patch panel
A connection point for drop and patch cables. Typically, a patch panel has
one or more rows of RJ-45 or other connectors. Drop cables are connected
to the connectors. Cables run between the connectors to connect drop
cables as needed.
Patch cable
A cable that is plugged into the patch panel to connect two drop cables. A
patch cable might or might not be a crossover cable, where the transmit
conductor at one end is connected to the receive conductor at the other.
Cross-connects
Individual wires that connect two drop cables to a patch panel. Crossconnects are rarely used in modern networks because they are built in the
network components. However, they are still frequently used in telephone
wiring.
MDF
A cable rack that interconnects the telecommunications wiring between
itself and any number of IDFs.
IDF
A cable rack that interconnects the telecommunications wiring between an
MDF and any workstation devices.
Wiring closet
A small room in which patch panels are installed. Drop cables radiate out
from the wiring closet to the components on the network.
CompTIAВ® Network+В® (Exam N10-005)
74
Copyright В© Element K Corporation
LESSON 3
Horizontal Cross-Connects
Horizontal cross-connects provide a point for the consolidation of all horizontal
cabling, which extends in a star topology to individual work areas, such as cubicles
and offices. Fiber optic horizontal cabling is limited to 90 meters. Optional consolidation points or transition points are allowable in horizontal cables, although many
industry experts discourage their use.
Vertical Cross-Connects
Vertical cabling or vertical cross-connects are generally recognized as cables that run
vertically between п¬‚oors in a building, or vertically between equipment in an equipment rack. They are not deп¬Ѓned as part of the Structured Cabling standards.
Plenum and PVC Cables
A plenum cable is a network cable that is jacketed tightly around conductors so that п¬Ѓre cannot
travel within the cable. The jacket of the plenum cable does not emanate poisonous gases
when it burns. Fire codes require that you install this special grade cabling in the plenum, an
air handling space, including ducts and other parts of the Heating, Ventilating, and Air Conditioning (HVAC) system in a building, between the structural and suspended ceilings, and under
raised п¬‚oors, as well as in п¬Ѓrebreak walls. Unlike non-plenum cables, plenum cables can run
through the plenum and п¬Ѓrebreak walls.
Polyvinyl chloride (PVC)-jacketed cabling is inexpensive and п¬‚exible. The PVC cable is also
referred to as the non-plenum cable. However, when PVC burns, it gives off noxious or poisonous gases. Additionally, PVC jacketing is not formed tightly to the conductors it contains.
Tests show that п¬Ѓre can travel within a PVC cable, passing through п¬Ѓrebreaks.
Figure 3-6: Plenum and PVC cables used in an office environment.
Lesson 3: Network Media and Hardware
75
Copyright В© Element K Corporation
LESSON 3
Fiber Optic Cables
Deп¬Ѓnition:
A п¬Ѓber optic cable is a network cable that has a core surrounded by one or more glass
or plastic strands. In addition, it contains extra п¬Ѓber strands or wraps, which are surrounded by a protective outer jacket. The core is the thin glass center through which
light travels transmitting data. The core is between 5 and 100 microns thick with cladding made from optical materials such as silica.
The cladding reп¬‚ects light back to the core in patterns determined by the transmission
mode. A buffer, often made of plastic, surrounds the cladding and core. To add strength
to the cable, strands of synthetic п¬Ѓber surround the buffer. An outer jacket, sometimes
called an armor, wraps and protects the whole assembly. Light pulses from a laser or
high intensity LED are passed through the core to carry the signal. The cladding
reп¬‚ects the light back into the core, increasing the distance the signal can travel without a need for regeneration.
Example:
Figure 3-7: Layers in a fiber optic cable.
Fiber optic cables are the least sensitive of any cable type to electromagnetic interference.
You should not look into the end of an operating п¬Ѓber optic cable. The intensity of light leaving the end
of a singlemode п¬Ѓber is strong enough to cause temporary or permanent damage to the eye.
Fiber Optic Cable Modes
Two modes of п¬Ѓber optic cables are available in market: multimode and singlemode. Both
modes of п¬Ѓber optic cables have an outer diameter of 125 microns; that is, 125 millionths of a
meter or 5 thousandths of an inch, which is just larger than a single human hair. The
multimode п¬Ѓber allows light to travel through its core in multiple rays or modes. Its core of 50
or 62.5 microns works with LED sources for slower networks and with laser for faster networks. At only 9 microns, the singlemode п¬Ѓber is much less in diameter than the multimode
п¬Ѓber. Within the singlemode п¬Ѓber, light travels unidirectionally. The singlemode п¬Ѓber is used
with laser to process telephony and cable TV transmissions.
Singlemode and multimode п¬Ѓbers have different characteristics.
CompTIAВ® Network+В® (Exam N10-005)
76
Copyright В© Element K Corporation
LESSON 3
Fiber Optic Cable Mode
Description
Singlemode п¬Ѓber
Carries an optical signal through a small core, which allows
only a single beam of light to pass. A laser, usually operating in
the infrared portion of the spectrum, is modulated in intensity
to transmit the signal through the п¬Ѓber. It provides a bandwidth
of up to 30 MHz.
Step-index multimode п¬Ѓber
Contains a core surrounded by cladding, each with its own uniform index of refraction. When light from the core enters the
cladding, a вЂњstep downвЂќ occurs due to the difference in the
refractive indices. Step-index п¬Ѓber uses total internal reп¬‚ection
to trap light.
Graded-index multimode п¬Ѓber
Possesses variations in the core glass to compensate for differences in the mode path length. Provides up to 2 GHz of
bandwidth, which is signiп¬Ѓcantly more than step-index п¬Ѓber.
Refraction
Refraction occurs when a light ray passing from one transparent medium to another,
bends due to a change in velocity. The change in velocity occurs due to the differences
in the density of the two mediums. The angle of incidence is the same as in reп¬‚ection.
The angle between the normal and the light ray as light enters the second medium is
called the angle of refraction.
Fiber Connectors
Various connectors are used with п¬Ѓber optic cables.
It often takes a specially trained and certiп¬Ѓed technician, plus specialized equipment, to install п¬Ѓber optic connectors. This is because the installation requires in-depth knowledge about п¬Ѓber optic communication systems and
п¬Ѓber optic cables. Additionally, the installation involves various testing processes, which can be done only by a
knowledgeable or certiп¬Ѓed technician.
Fiber Optic Connector
Description
Straight Tip (ST)
ST connectors are similar in appearance to BNC connectors and are
used to connect multimode п¬Ѓbers. They have a straight, ceramic center
pin and bayonet lug lockdown. They are often used in network patch
panels. ST connectors are among the most popular types of п¬Ѓber connectors.
Lesson 3: Network Media and Hardware
77
Copyright В© Element K Corporation
LESSON 3
Fiber Optic Connector
Description
Subscriber Connector or Standard Connector (SC)
SC connectors are box-shaped connectors that snap into a receptacle.
They are often used in a duplex conп¬Ѓguration where two п¬Ѓbers are terminated into two SC connectors that are molded together. SC is used
with a singlemode п¬Ѓber.
Face Contact (FC)
FC connectors use a heavy duty ferrule in the center for more mechanical stability than SMA or ST connectors. A ferrule is a tubular structure
made of ceramic or metal that supports the п¬Ѓber. These connectors are
more popular in industrial settings where greater strength and durability
is required.
FDDI
FDDI connectors are used for multimode п¬Ѓber optic cable and are a
push/pull-type, two-channel snap-п¬Ѓt connectors. Also called a Media
Interface Connector (MIC).
Biconic
The biconic connector is a screw-on type connector with a tapered
sleeve that is п¬Ѓxed against guided rings and screws onto the threaded
sleeve to secure the connection. When the connector is inserted into the
receptacle, the tapered end of the connector locates the п¬Ѓber optic cable
into the proper position. The biconic connector is one of the earliest
connector types.
CompTIAВ® Network+В® (Exam N10-005)
78
Copyright В© Element K Corporation
LESSON 3
Fiber Optic Connector
Description
Local Connector (LC)
LC connectors are used for both singlemode and multimode п¬Ѓber and a
small form factor ceramic ferrule. It is about half the size of a SC or
ST connector. LC connectors use an RJ-45-type latching and can be
used to transition installations from twisted pair copper cabling to п¬Ѓber.
Sub Multi Assembly or Sub
Miniature type A (SMA)
SMA connectors are similar to ST connectors, and use a threaded ferrule on the outside to lock the connector in place. It is typically used
where water or other environmental factors necessitate a waterproof
connection, unlike a bayonet-style connector.
Mechanical Transfer Registered Jack (MT-RJ)
The MT-RJ connector, also called a Fiber Jack connector, is a compact
snap-to-lock connector used with multimode п¬Ѓber. Because the MT-RJ
connector is compact, it is easy to use. It is similar in size to the RJ-45
connector. Two strands of п¬Ѓber are attached with the MT-RJ connector.
Cable Properties
Twisted pair, coaxial, and п¬Ѓber optic cables have different properties with regard to transmission speed, distance, duplex, noise immunity, and frequency.
Lesson 3: Network Media and Hardware
79
Copyright В© Element K Corporation
LESSON 3
Cable Type
Properties
Twisted pair
Transmission Speed:
вЂў CAT 3 вЂ” UTP at 10 Mbps
вЂў CAT 5 вЂ” Up to 100 Mbps
вЂў CAT 6 вЂ” Up to 155 Mbps
Distance: 1800 ft.
Duplex: Supports full-duplex transmission
Noise Immunity (security, EMI): 30 MHz
Frequency: Up to 600 MHz
Coaxial
Transmission Speed: 10 Mbps
Distance: Star topology вЂ“ 2000 ft.
Bus topology вЂ“ 1000 ft.
Duplex: Supports both half-duplex and full-duplex transmission
Noise Immunity (security, EMI): High
Frequency: 1 GHz to 10 GHz
Fiber optic
Transmission Speed: 40,000 Mbps
Distance: Multimode п¬Ѓber is typically used for shorter runs of up to 500
meters, and singlemode for longer runs. The ultra high-quality of some п¬Ѓber
cables allows runs of 62 miles or more between repeaters, which are rarely
used now.
Duplex: Supports full-duplex transmission as it consists of two п¬Ѓbers that
can be used for simultaneous, bi-directional data transfer.
Noise Immunity (security, EMI): High
Frequency: Normally the frequency is very high and its range depends on
the bandwidth and the device that you use.
Other Cable Media Types
Although twisted pair, coax, and п¬Ѓber optic cables are the most prevalent types of cable media
used in network installations, you might also encounter several other types of cables.
Cable Type
Description
Serial cable
A serial cable is a type of bounded network media that transfers information
between two devices using serial transmission. Information is sent one bit at a time
in a speciп¬Ѓc sequence. A serial cable most often uses an RS-232 connector. In networking, serial cables are often used to connect routers. Null modem serial cables
are also used by networking professionals.
IEEE 1394
(FireWireв„ў)
While not as common as other bounded network media, IEEE 1394, commonly
known as FireWire, can be used to connect up to 63 devices to form a small local
network. FireWire cables use a shielded cable similar to STP with either four or six
conductors. Connections to devices are made with either a six- or four-pin connector.
USB
A USB connection is a personal computer connection that enables you to connect
multiple peripherals to a single port with high-performance and minimal device conп¬Ѓguration. USB connections support two-way communications.
CompTIAВ® Network+В® (Exam N10-005)
80
Copyright В© Element K Corporation
LESSON 3
IEEE 1394 is commonly called FireWire, a name given to the standard by Apple, Inc. Sony names the same standard i.LINKв„ў, which is often written as iLink.
Cables Used in Serial and Parallel Data Transmissions
The difference between serial and parallel cable is primarily the method that data is
transmitted with. In parallel transmission, data (typically 8 bits) is transmitted simultaneously over several channels or wires.
USB Standards
USB 3.0 is the current standard that can transmit data at rates of up to 5 Gbps. USB
2.0 was the earlier standard that supported communication at up to 480 Mbps. It can
communicate at up to 12 Mbps. A USB 2.0 device connected to a USB 1.1 hub or port
will only communicate at USB 1.1 speeds, even though it might be capable of faster
speeds. Windows will inform you of this when you connect the device.
FireWire vs. USB
FireWire predated USB and was faster than the original USB 1.1 standard. USB 3.0,
with its increased speed, has largely superseded FireWire 3200. However, although
USB 3.0 is faster than FireWire 3200 by the numbers, FireWire 3200 has better
throughput, making it ideal for video or audio п¬Ѓle transfers and external storage
devices. A п¬Ѓle transfer of 100 separate documents might be slightly faster on USB than
FireWire, but a п¬Ѓle transfer of a single 2 GB video п¬Ѓle will be much faster in
FireWire. Also, while USB provides a device with up to 5V power, FireWire maintains
an edge in power management and provides up to 12V power on the wire.
ACTIVITY 3-1
Identifying Bounded Network Media
Scenario:
In this activity, you will identify the major types of bounded network media.
1.
Match the media type with its definition.
IEEE 1394
Fiber optic
Twisted pair
Coaxial
a.
Multiple insulated conductors clad in
a protective and insulating outer
jacket carry the signal.
b. A shielded cable that is used to connect up to 63 devices to form a small
local network.
c. Light pulses from a laser or LED
carry the signal through a core.
d. A central copper conductor carries the
signal, surrounded by braided or foil
shielding.
Lesson 3: Network Media and Hardware
81
Copyright В© Element K Corporation
LESSON 3
2.
Identify the type of network cabling shown in the graphic.
a) Twisted pair
b) Coax
c) Fiber optic
3.
Match the network media with the connector typically used with it.
Coaxial cable
Twisted pair cable
Fiber optic cable
4.
a. RJ-45
b. MT-RJ
c. BNC
Identify the type of network cabling shown in the graphic.
a) Unshielded twisted pair
b) Shielded twisted pair
c) Coax
d) Fiber optic
CompTIAВ® Network+В® (Exam N10-005)
82
Copyright В© Element K Corporation
LESSON 3
5.
Why is a plenum cable commonly used in air handling spaces and run through firebreaks?
a) It does not give off poisonous gases when burning.
b) Fire cannot travel through the cable because of the insulated metal shield that surrounds the conductors.
c) Fire cannot travel through the cable because the jacket is closely bound to the conductors.
d) It is more durable than using a PVC cable.
ACTIVITY 3-2
Identifying Network Media
Scenario:
In this activity, you will identify the network media used on your local classroom network.
1.
Identify the cable types used to connect devices in the classroom.
2.
Identify the types of connectors used in the classroom network.
3.
Your instructor will provide samples of a variety of media and connector types. Identify each of the media and connectors.
Lesson 3: Network Media and Hardware
83
Copyright В© Element K Corporation
LESSON 3
TOPIC B
Unbounded Network Media
In the previous topic, you identiп¬Ѓed bounded network media. With more and more wireless
network implementations, you will need different types of media to meet the needs of your
wireless network. In this topic, you will identify unbounded network media.
Unbounded media technologies have two distinct advantages for businesses over bounded
media: п¬Ѓrst, they are generally easier to install and conп¬Ѓgure; and second, they afford clients a
lot of mobility. They are usually not as secure as bounded media, as the signals are subject to
interception. Wireless technologies implementations offer various advantages and you need to
understand their limitations to compensate for their disadvantages in your network environments.
Wireless Communication
Deп¬Ѓnition:
Wireless communication is a type of communication in which signals are transmitted
over a distance without the use of a physical medium. Information, data or voice, is
transmitted as electromagnetic waves, such as radio and microwaves, or as light pulses.
Wireless communication enables users to move around while remaining connected to
the network. Wireless communication can be broadly classiп¬Ѓed as point-to-point communication such as cellular phones, multipoint communication such as wireless
computer networks, and broadcast communication such as radio services.
Wireless media are also referred to as unbounded network media, where data signals are transmitted
through the air instead of cables.
Wireless communication permits connections between areas where it would be difп¬Ѓcult or impossible
to connect using wires, such as in hazardous areas, across long distances, or inside historic buildings.
Example:
Figure 3-8: Communication on a wireless network.
Point-to-Point, Multipoint, and Broadcast Communications
Wireless connections can be point-to-point, multipoint, or broadcast.
CompTIAВ® Network+В® (Exam N10-005)
84
Copyright В© Element K Corporation
LESSON 3
Point-to-point communication is a direct connection between two nodes. Data transmitted by one node goes directly to the other. Cellular communications are point-to-point
communications. Typically, point-to-point wireless connections are used to link distant
buildings or networks as part of a CAN, a MAN, or a WAN.
Multipoint communication involves connections between many nodes. Each multipoint
connection has more than two endpoints. A signal transmitted by any device through a
medium is not private. All devices that share the medium can detect the signal but cannot receive it. Wireless computer networks are an example of multipoint
communication.
Broadcast communication is a communication method in which data goes from a
source node to all other nodes on a network. Each node receives and acts on the data.
Radio communication is an example of a broadcast communication.
Radio Networking
Deп¬Ѓnition:
Radio networking is a form of wireless communications in which signals are sent via
Radio Frequency (RF) waves in the 10 KHz to 1 GHz range. Radio networking is subject to electrical interference from power lines, a buildingвЂ™s metal structural
components, and atmospheric conditions.
U.S. regulatory agencies deп¬Ѓne the limits on which frequencies and how much power can be used to
transmit radio signals. In the United States, the Federal Communications Commission (FCC) regulates
radio transmission.
Example:
Figure 3-9: Communications on a radio network.
Broadcast Radio
Deп¬Ѓnition:
Broadcast radio is a form of RF networking that is non-directional, uses a single frequency for transmission, and comes in low- and high-power versions. Low-power RF
transmission travel a short distance, often no more than 70 meters, but are inexpensive
and relatively easy to install. High-power RF transmission travel longer distances;
however, specially-trained technicians are often required to install this more expensive
type of system.
Lesson 3: Network Media and Hardware
85
Copyright В© Element K Corporation
LESSON 3
Example:
Figure 3-10: Communications using broadcast radio.
Spread Spectrum
Deп¬Ѓnition:
The spread spectrum is a form of radio transmission in which the signal is sent over
more than one frequency. Because signals are transmitted over different frequencies, it
is more difficult to eavesdrop and capture the signals. Additionally, distinguishing
between the signal and background noise is often easier.
Example:
Figure 3-11: Spread spectrum radio.
Types of Spread Spectrum
The spread spectrum uses either frequency hopping or direct sequencing techniques to distribute the signal across the radio spectrum.
CompTIAВ® Network+В® (Exam N10-005)
86
Copyright В© Element K Corporation
LESSON 3
Spread Spectrum Type
Description
Frequency Hopping Spread Spectrum (FHSS)
FHSS sends signals on one channel at a time. The
channel changes at п¬Ѓxed predetermined intervals.
Both the sender and receiver use the same selection
and order of frequencies so that communication is
possible even as the frequency changes. FHSS does
not signiп¬Ѓcantly reduce noise or improve the signalto-noise ratio.
Direct Sequence Spread Spectrum (DSSS)
DSSS uses multiple channels simultaneously to send
data. Additionally, Error Detection And Correction
(EDAC) techniques are used to reduce data transmission errors.
In DSSS, a data signal is converted into multiple
data signals called chips. The set of chips is sent
across a wide band of adjacent channels. Upon
receiving the data, the receiver combines and converts the signals back into the original. Because of
the included EDAC information, the signal can often
be reconstructed only if some of the channels are
received clearly.
Eavesdroppers are less likely to be successful at listening in on an FHSS transmission than a normal radio transmission. It is unlikely that parties other than the sender and the receiver would know the selection and order of
frequencies being used to communicate.
Infrared Transmission
Deп¬Ѓnition:
Infrared transmission is a form of wireless transmission over unbounded media in
which signals are sent as pulses of infrared light. Infrared signals transmit at frequencies between 300 GHz and 300,000 GHz. Infrared frequencies transmit in the range
just below visible light in the electromagnetic spectrum. Receivers need an unobstructed view of the sender to successfully receive the signal, though the signal can
reп¬‚ect off hard surfaces to reach the recipient. Many infrared-compatible devices follow the standards set forth by the Infrared Data Association (IrDA).
Lesson 3: Network Media and Hardware
87
Copyright В© Element K Corporation
LESSON 3
Example:
Figure 3-12: Infrared transmission receiver.
Infrared Transmission Rates
Infrared wireless networking offers transmission rates between 10 and 16 Mbps. Infrared compatible devices, such as a wireless mouse and keyboard, are limited to
distances of approximately three feet and for that reason such devices are often used in
Wireless Personal Area Networks (WPANs). Direct transmission and short distances
between devices virtually eliminate eavesdropping and signal tampering, a key feature
that makes IrDA the chosen standards for securing the transmission medium.
Infrared Speciп¬Ѓcation
Description
Serial Infrared (SIR)
Discovery and negotiation of data connections is performed
at 9.6 Kbps and speeds vary from 9.6 to 115.2 Kbps
Fast Infrared (FIR)
An obsolete term, but still used to describe 4 Mbps data
transmission rates. FIR is also an informal reference to all
speeds above SIR.
Very Fast Infrared (vFIR)
Supports data transmission speeds of up to 16 Mbps.
Medium Infrared (MIR)
An unofficial reference to data transmission speeds between
0.576 and 1.152 Mbps.
IrDA Data transfer
Support for IrDA functions is included with, or can be added to, many current operating systems including Windows, Mac OS X, and Linux. The IrDA speciп¬Ѓcations
dictate a wide range of functions:
вЂў
File transfer: The IrDA Object Exchange (IrOBEX) protocol enables п¬Ѓle transfer
between IrDA devices.
вЂў
Printing: The IR Line Printer (IrLPT) protocol enables printing between IrDA
devices such as laptops and IrDA printers.
вЂў
Image transfer: The IR Transfer Picture (IrTran-P) protocol enables easy image
transfer between digital cameras and Windows devices.
вЂў
Dial-up networking: The IR Communications (IrCOMM) protocol enables
dial-up Internet access through IR-enabled cell phones.
CompTIAВ® Network+В® (Exam N10-005)
88
Copyright В© Element K Corporation
вЂў
LESSON 3
LAN access and peer-to-peer networking: The IR Network (IrNET) protocol
enables network access through IR-enabled access points.
Bluetooth
Bluetooth 1.1 is a wireless technology that facilitates short-range wireless communication
between devices such as personal computers, laptops, cellular phones, and gaming consoles,
thus creating a WPAN. A maximum of eight Bluetooth devices usually less than 30 feet apart
can be connected to each other at a point in time. Bluetooth establishes a link using an
RF-based media and does not need line-of-sight to make connections.
Bluetooth uses the 2.4 GHz spectrum to communicate a 1 Mbps connection between two
devices for both a 232 Kbps voice channel and a 768 Kbps data channel. Bluetooth 2.0 will
increase the overall speeds to a data rate of 2.1 to 3 Mbps. The latest version of BluetoothвЂ”
version 2.0 allows for communicating devices to be as far as 30 meters or 100 feet apart.
The вЂњBluetoothвЂќ technology is named in memory of a Danish king named Harald Bluetooth.
Figure 3-13: Bluetooth communications.
Although Bluetooth is used often in a WPAN, a small personal ofп¬Ѓce or even a desktop allows you to connect
other Bluetooth-enabled devices effectively.
Microwave Transmission
Deп¬Ѓnition:
Microwave transmission is a form of point-to-point wireless transmission over
unbounded media in which signals are sent via pulses of electromagnetic energy in the
microwave region of the electromagnetic spectrum. It transmits signals at a frequency
range of 1 GHz to 300 GHz. Receivers need an unobstructed view of the sender to
successfully receive the signal, and depending on the frequency in use, transmission
can be affected by environmental conditions. Signals can be reп¬‚ected off satellites to
increase the transmission distance. Microwave transmission technologies are often used
in WANs and MANs.
Lesson 3: Network Media and Hardware
89
Copyright В© Element K Corporation
LESSON 3
Example:
Figure 3-14: Microwave transmission using satellites.
Wireless Access Points
Deп¬Ѓnition:
A Wireless Access Point (WAP) is a device that provides a connection between wireless
devices and can connect to wired networks. It has a network interface to connect to the
wired network and an antenna or infrared receiver necessary to receive wireless signals. The Service Set Identiп¬Ѓer (SSID) is a 32-bit alphanumeric string that identiп¬Ѓes a
WAP and all devices attached to it. Wireless connectivity devices such as the WAP or
wireless routers come with a default SSID. Many access points include security features that enable you to specify which wireless devices can make connections to the
wired network.
IEEE 802.11 does not specify how two WAPs should communicate. To ensure compatibility, it is best to
use WAPs from the same manufacturer.
Example:
Figure 3-15: A wireless access point connecting to a wired network.
Enable and Disable SSIDs
Wireless connectivity devices such as a WAP or wireless routers come with a default
SSID. An administrator can accept a deviceвЂ™s default SSID or specify an SSID manually to more clearly identify the device.
CompTIAВ® Network+В® (Exam N10-005)
90
Copyright В© Element K Corporation
LESSON 3
Another method of securing a wireless connection is by disabling the broadcast of the
SSID of the wireless device. Disabling the broadcast causes the wireless device to not
appear on the network. Therefore, when a client device scans the network, it will not
be able to locate the disabled SSID. Though disabling the broadcast of SSID is comparatively an easy task to do, this method is not very effective because hackers can
still access the WLAN using sniffing software.
SSID Mismatches
A client device uses its SSID to identify itself to the wireless network. An SSID mismatch can occur when a device receives a packet that contains a different SSID than
its own. Devices need to be conп¬Ѓgured with the same SSID as the WAP in order to
communicate with it. A mismatch of SSIDs can block communication between the
device and the WAP.
Steps to Install a WAP
How to Install a Wireless Access Point
Procedure Reference:
To install a WAP:
1.
Select and purchase a WAP that meets your needs.
2.
Determine placement for the WAP:
вЂў
Where are the nodes you wish to connect to the router located?
3.
вЂў
How long will the cable connects the WAP to the wired network be?
вЂў
Is there access to a power outlet?
вЂў
Will the device be physically secure?
вЂў
Do you need access to a wired network drop?
вЂў
Consider wireless networking characteristics such as avoiding interference,
signal range, and signal degradation.
Using a laptop, or a workstation at a desk or workbench, conп¬Ѓgure the WAP prior
to deployment:
a. Connect a network cable to the WAPвЂ™s uplink port.
b.
Power on the WAP.
c.
Connect to the WAP via the built-in web interface, or by using manufacturer
supplied conп¬Ѓguration software.
d.
Conп¬Ѓgure the desired settings:
вЂў
Consult your network documentation for conп¬Ѓguration parameters such
as the WAPвЂ™s SSID, DHCP settings, and security settings.
вЂў
Consult the device manufacturerвЂ™s documentation for information on
how to conп¬Ѓgure and use the deviceвЂ™s capabilities and settings.
e.
Save the settings once conп¬Ѓgured.
f.
Test the WAPвЂ™s functionality by connecting a wireless client to it:
вЂў
Ping or use traceroute to test the connection to other computers and
observe the results.
Lesson 3: Network Media and Hardware
91
Copyright В© Element K Corporation
LESSON 3
вЂў
Use software tools to monitor the clientвЂ™s wireless signal strength and
the WAPвЂ™s behavior.
вЂў
Connect to internal network shares.
вЂў
Connect to the Internet.
4.
Place the WAP in the chosen location.
5.
If necessary, run the appropriate type of cabling from the wired network to the
WAP. Label the cable or drops on both ends so that there is no confusion as to
where the cables go.
6.
Power on the WAP.
7.
Test the WAPвЂ™s functionality in the live environment by repeating the tests from
earlier installation.
8.
Document your actions and their results, including any exceptions along the way.
ACTIVITY 3-3
Identifying Wireless Transmission Technologies
Scenario:
In this activity, you will identify and distinguish between the various types of unbounded
media used to create wireless links between network nodes.
1.
Select the characteristic(s) of unbounded media.
a) Use a physical medium
b) Transmit both voice and data signals
c) Use electromagnetic energy
d) Operate only within a 10 mile radius
2.
At what radio frequency does Bluetooth operate?
a) 5 GHz
b) 2.4 GHz
c) 300 GHz
d) 100 GHz
3.
Which form of wireless transmission transmits signals in the 10 KHz to 1 GHz frequency
range?
a) Radio
b) Infrared
c) Microwave
CompTIAВ® Network+В® (Exam N10-005)
92
Copyright В© Element K Corporation
LESSON 3
4.
What statements are true of data signaling in FHSS?
a) Consist of multiple chips transmitted across a different frequency.
b) Sent over a single, high-frequency RF transmission band.
c) Transmitted across a single frequency, and later sent over a randomly selected frequency.
d) Less likely to be intercepted, but not significantly less susceptible to noise.
5.
Which forms of wireless media operate only when there are no obstacles in the transmission path?
a) Infrared
b) Radio
c) Microwave
6.
Which unbounded media transmission method uses multiple frequencies to reduce
interference and the likelihood of eavesdropping?
a) Infrared
b) Microwave
c) Spread spectrum
d) Broadcast radio
TOPIC C
Noise Control
You have identiп¬Ѓed both bounded and unbounded transmission mediaвЂ”the conduits over
which network communications п¬‚ow. This п¬‚ow of communications can be impaired by interference such as noise. In this topic, you will describe noise and noise control techniques used
on your network media.
Any number of things can cause interference with the transmission on your networkвЂ”radio,
TV, cell phones, and radar to name a few. The one constant is that noise always slows a networkвЂ™s performance and reduces its reliability. When the receiving node has to try to make
sense of a mix of different signals, it ends up asking the sending node to resend data multiple
times. In order to reduce noise on your network, you need to understand the sources of noise
and how to protect your network against them.
Electrical Noise
Deп¬Ѓnition:
Electrical noise refers to unwanted signals that are present in the network media.
Noise interferes with the proper reception of transmitted signals. Noise can come from
natural sources, such as solar radiation or electrical storms, or from man-made sources,
such as electromagnetic interference from nearby motors or transformers.
Lesson 3: Network Media and Hardware
93
Copyright В© Element K Corporation
LESSON 3
Example:
Figure 3-16: Electrical noise on a signal transmission.
Sources of Electrical Noise
A variety of sources contribute to electrical noise.
Noise Source
Description
Ambient noise
Ambient noise can come from many sources, including solar disturbances that
affect the EarthвЂ™s magnetosphere, or nearby radio broadcasting towers. These
forms of noise affect both bounded and unbounded media, with longer network
segments being affected more than shorter ones.
Power wires
High-tension power lines or a buildingвЂ™s own electrical wiring can create electrical
noise. Network cables that run parallel to electric wires are more susceptible to
electrical noise than those that run perpendicular.
Electric motors
Electric motors, such as those used in elevators, refrigerators, water fountains, and
HVAC equipment, create noise while running, but this is more when they start up.
Motors require a huge amount of electricity to start up, causing a burst of noise.
These bursts can create temporary outages that resolve themselves when the motor
reaches full speed or stops.
Electrical heatgenerating devices
Like electric motors, electric heating elements use a lot of electricity and cause a
signiп¬Ѓcant amount of electrical noise while running.
Fluorescent, neon,
and HID lights
Fluorescent, neon, and High-Intensity Discharge (HID) lighting devices produce a
large amount of electrical noise, generally due to the transformers and ballasts
required to make these lights work. Interior overhead lights, building security
lights, and decorative lighting can create enough noise during operation to interfere
with networking signals traveling over either bounded or unbounded media.
Other Effects of Noise
In addition to the noise that affects data networking media, noise can affect the electricity that powers computing devices. Surges or dips can result in the electric current,
which can damage equipment, cause application or operating system software crashes,
or even system restarts.
Electric motors, heating elements, solar disturbances, or natural disasters can cause
transient power problems. Most devices include power conditioning components that
handle at least some of these power п¬‚uctuations. However, sensitive equipment should
be protected through the use of specialized power conditioning devices, such as an
Uninterruptible Power Supply (UPS) or a surge protector.
CompTIAВ® Network+В® (Exam N10-005)
94
Copyright В© Element K Corporation
LESSON 3
Grounding
Grounding is the connection of a shield or conductor to an electrical ground point, such as a
pipe or wire that is in contact with the ground. Grounding at one point in a segment helps prevent noise on the data conductor by shunting noise signals to ground. Connecting to ground at
multiple points can introduce noise onto the line, degrading network performance.
Figure 3-17: Grounding using a rack frame.
Grounding for Safety
Electrical devices often must be connected to a ground point for safety. In these situations, the ground connection serves as a way to direct high voltages safely away from
humans and other devices, sending them instead into the ground.
Isolated Grounds
You should ground networking and other sensitive electronic equipment to dedicated
ground points rather than to pipes and conduits. Electricians refer to this sort of ground
connection as an isolated ground and will use an orange socket for such circuits.
Shielding
Deп¬Ѓnition:
Shielding is the method of placing the grounded conductive material around the media.
This prevents the introduction of noise into the media by deп¬‚ecting the noise to the
ground. Because of this, the connection between the ground and the shield is called a
drain. Shields are drained in only one location to prevent a ground loop, a phenomenon in which the shield introduces noise in the data signal.
Lesson 3: Network Media and Hardware
95
Copyright В© Element K Corporation
LESSON 3
Example:
Figure 3-18: Shielding used in Coax.
Differential Signaling
Deп¬Ѓnition:
Differential signaling is a noise reduction technique in which signals from two inputs
are compared; signals that are identical on both inputs are ignored, while those that are
different on the inputs are accepted. Quite often, noise is constant on both inputs of a
network cable. With differential signaling, such noise can be easily canceled out.
Example:
Figure 3-19: Flow of signal in differential signaling.
Noise Control with Twisted Pair
The twists in the twisted pair cable determine how resistant the cable will be to noise. When
noise is introduced into a twisted pair cable in which pairs are closely wound, noise is
deп¬‚ected, minimizing the effect on the signal. When noise is introduced into a twisted pair
cable in which pairs are loosely twisted, noise impinges on the conductor, adversely affecting
the signal.
The tightness of the twists in twisted pair is called the вЂњtwist ratio.вЂќ
CompTIAВ® Network+В® (Exam N10-005)
96
Copyright В© Element K Corporation
LESSON 3
Figure 3-20: Noise impact of different twists.
Twists and Connectors
The primary difference between Category 3 and Category 5 twisted pair cables is the
number of twists per inch, with Cat 5 being more tightly wound. However, to fully
support the network speeds for which they are rated, you must take care when adding
connectors to these cables. You should not unwind the pairs too much or you will
eliminate the noise-canceling beneп¬Ѓts of the twists. The more twists per foot and the
more consistently the twists arranged are, the more resistant to noise a cable will be.
As a rule, you should not unwind to more than 3/8 of an inch (about 10 mm) for a
Category 5 cable. A Category 3 cable is more tolerant to unwinding of twists. A Category 6 cable requires special connectors that maintain the twists inside the connector.
Termination
Termination is the application of a resistor or other device to the end of a cable. Adding such a
terminator ensures that the ends of the cable do not represent an abrupt change in impedance,
causing signal reп¬‚ections and noise. The electrical characteristics of a terminator must match
those of the cable and other components.
Figure 3-21: Terminators used in a bus network.
In legacy networking equipment, you had to install terminators yourself. They are now typically built into the networking devices you use.
Lesson 3: Network Media and Hardware
97
Copyright В© Element K Corporation
LESSON 3
Matching Impedance
Generally, you must match the impedance of all devices and cables to achieve proper
signal п¬‚ow. Signals can reп¬‚ect off the points where impedance changes, such as at a
connector between devices or cable segments of mismatched impedance. Signals п¬‚ow
smoothly across connections when impedances match.
A cableвЂ™s impedance is typically marked on its outer jacket. If such a measure is a concern for a particular networking device, you will п¬Ѓnd markings on its case or in its manual stating the deviceвЂ™s
impedance.
Noise Reduction Considerations
The installation techniques you follow can affect the amount of noise introduced into a network cable. There are several considerations that you can use to limit the impact of noise on
your network.
Consideration
Description
Separate data and electric cables
Do not run data and electricity cables in the same trays, raceways, and conduits. Avoid running network cables parallel to
each other when you can, because crosstalk is worst when cables
run parallelly.
Fluorescent lights
Keep network cables at least 20 inches from п¬‚uorescent lights as
it can cause electromagnetic interference. If you must run data
cables across or near these lights, do so in such a way that
exposes the smallest length of cable to the light.
Power ground
Make sure to ground all equipment and electrical circuits
according to the manufacturerвЂ™s instructions and local building
codes.
Connector installation
Follow standards, speciп¬Ѓcations, and manufacturerвЂ™s directions
when installing network cables. Do not unwind conductor pairs
any more than required or allowed. Make sure connectors are
п¬Ѓrmly attached and connected to power outlets.
CompTIAВ® Network+В® (Exam N10-005)
98
Copyright В© Element K Corporation
LESSON 3
ACTIVITY 3-4
Identifying Electrical Noise Control Measures
Scenario:
In this activity, you will identify methods for controlling electrical noise.
1.
Choose the statement that defines electrical noise.
a) Solar radiation or man-made sources of data signals.
b) Extraneous signals introduced onto network media.
c) The reception of transmitted signals from a source.
d) Extraneous signals that enhance the quality of received transmission.
2.
Select the items that are sources of electrical noise.
a) Fluorescent lights
b) Solar storms
c) Wind storms
d) HVAC equipment
3.
True or False? Differential signaling reduces electrical noise by distinguishing between
the signals on two different inputs.
True
False
4.
What is the process of installing a resistor on the end of a cable to prevent signal
reflections called?
a) Draining
b) Grounding
c) Terminating
d) Shielding
5.
Match the source of noise with the means by which you can lessen or eliminate its
impact.
Fluorescent lights
Power ground
Separate data and electric
cables
Connector installation
a.
Ensure that all equipment and electrical circuits follow the manufacturerвЂ™s
instructions and local building codes.
b. Do not unwind conductor pairs any
more than required or allowed.
c. Avoid running network cables parallel
to each other when you can to avoid
cross talk.
d. Keep cables at more than 20 inches
distance from this source to avoid
electromagnetic interference.
Lesson 3: Network Media and Hardware
99
Copyright В© Element K Corporation
LESSON 3
TOPIC D
Network Connectivity Devices
You are familiar with how network media, both bounded and unbounded, carry data across a
network. Network connectivity devices transmit this data from one end to another. In this
topic, you will identify the network connectivity devices and their purpose.
Network connectivity devices are the base connections upon which the structure of a network
is established. Network connectivity devices connect clients to the network and assist in transfer of data on a network. Network devices can also boost the data signal to increase the
distance your data transmission can travel and to ensure that they are usable at the destination.
NICs
Deп¬Ѓnition:
A Network Interface Card (NIC), also called a network adapter or network card, is a
device that serves as an interface between a computer and the network. To connect to a
network, a computer must have a NIC installed. NICs can be built into the
motherboard of the computer, or can be connected using a USB, PC Card,
CompactFlash or FireWire port; or it can also be an internal adapter card that is
installed on one of the computerвЂ™s expansion slots. NICs can connect to either wired or
wireless networks.
Example:
Figure 3-22: A NIC on a computer.
NIC Installation
Speciп¬Ѓc installation procedures for network cards might vary depending on the type of
hardware used and its software features. You will need to customize the generic installation procedure to suit your speciп¬Ѓc situation. To install a NIC you need to:
1.
Ensure that you take anti-static precautions by using an anti-static wrist strap or
similar gear.
CompTIAВ® Network+В® (Exam N10-005)
100
Copyright В© Element K Corporation
LESSON 3
2.
Power down the PC.
3.
Disconnect the power and other cables.
4.
Open the case for the CPU.
5.
Locate the PCI or PCIx slot you want to install the card into.
6.
Install the card into the slot and secure it with a screw.
7.
Close the case and reconnect the cables.
8.
Connect a network cable to the newly installed card.
9.
Power on the PC.
10. Install the manufacturer provided drivers. The operating system may identify and
install the driver automatically or you may have to install the driver manually.
11. Test the cardвЂ™s functionality.
вЂў
Observe the cardвЂ™s LED lights to verify that it is operational.
вЂў
Ping other computers on the network.
вЂў
Connect to internal network share folders to check local network access.
вЂў
Connect to the Internet.
12. Document the steps for the installation for future reference.
Full Duplex Support
Full Duplex is a feature of NIC that allows multiple devices to send and receive data
simultaneously without data collision. Because a switch forms a miniature network
between a node and itself, there is no chance of data collision. Thus, it does not need
to use a conventional media access method, such as CSMA/CD. Instead, providing the
nodeвЂ™s NIC is properly conп¬Ѓgured, the switch can support a full duplex connection
with each node over which data can be sent and received simultaneously. Full duplex
operation may not be enabled by default on your NICs and switches. Taking the time
to enable this feature using the NICвЂ™s properties can improve performance by doubling
throughput on your network.
Lesson 3: Network Media and Hardware
101
Copyright В© Element K Corporation
LESSON 3
ACTIVITY 3-5
Identifying the Local Network Card
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Your user name is Child##\Administrator (where ## is your assigned student number). Your
password is !Pass1234. The classroom main domain is named CLASSNET.
Scenario:
In this activity, you will identify the local network adapter card.
What You Do
How You Do It
1.
a. Press Ctrl+Alt+Delete to log on.
Log on to Windows Server 2008 R2.
b. In the log on screen, click Switch User
and then click Other User.
c. In the User name text box, type Administrator and press Tab. In the Password
text box, enter !Pass1234
d. Close the Server Manager window.
CompTIAВ® Network+В® (Exam N10-005)
102
Copyright В© Element K Corporation
LESSON 3
2.
Verify your log on identity.
a. Click Start.
b. Observe that your user name is displayed
at the top of the Start menu.
c. Choose Control Panel and, in the Control
Panel window, click User Accounts.
d. In the User Accounts window, in the right
pane, click the User Accounts link.
e. Click the Manage User Accounts link.
f.
Verify that your user name is selected and
click Properties.
g. Observe your domain user name in the
title of the dialog box. Close the
CHILD##\Administrator Properties and
User Accounts dialog boxes.
3.
Identify the network card type.
a. In the User Accounts window, click the
Control Panel Home link.
b. In the Control Panel window, click the
Hardware link.
c. In the Devices and Printers section, click
the Device Manager link.
d. In the Device Manager window, in the
objects list, double-click Network adapters to expand it.
Your card type might be different from the one
displayed in the graphic of Step 2e.
Lesson 3: Network Media and Hardware
103
Copyright В© Element K Corporation
LESSON 3
e. Identify the network card type and then
close all open windows.
Transceivers
Deп¬Ѓnition:
A transceiver is a device that has both a transmitter and a receiver integrated into it
and, as a result, can both send and receive data. Most modern transceivers are built
into the network card. In networking, the transceiver supports the NIC in allowing data
transmission through the medium.
Example:
Figure 3-23: A transceiver on a network card.
Example: GBIC
A Gigabit Interface Converter (GBIC) is a transceiver used to convert electrical signals
into optical signals and vice versa. It is used as an interface for high-speed networking
and to upgrade the network, without needing to replace all components in the
motherboards. For instance, if different optical technologies are used, GBICs can be
used to speciп¬Ѓcally conп¬Ѓgure that link on the network. Based on the wavelength of
laser light generated within the GBIC generator, GBICs can be categorized into shortwave GBICs and long-wave GBICs. The short-wave GBIC is used for connecting
devices that are between 0.5 meters and 500 meters apart. Meanwhile, the long-wave
GBIC is used for connecting devices that are between 2 meters and 6 miles apart.
CompTIAВ® Network+В® (Exam N10-005)
104
Copyright В© Element K Corporation
LESSON 3
Example: SFP
A Small Form Factor Pluggable (SFP) transceiver is most commonly used in 2 Gbps
and 4 Gbps п¬Ѓber channel components to interconvert electrical signals and optical signals. SFPs are similar to GBICs in their architecture, but they allow higher port density
than GBICs.
Switches
Deп¬Ѓnition:
A switch is a network device that acts as a common connecting point for various nodes
or segments. Switches work with pairs of ports, connecting two segments into an isolated contention domain as needed. Switches check the MAC address of each packet
before they forward the packet to one or more ports for transmission. Most switches
can work with multiple pairs of ports simultaneously to improve performance.
Switches are responsible for forwarding data from the source to the destination, but
switches forward data packets only to nodes or segments to which they are addressed.
Because switches forward each packet only to the required port, the chances of collision are greatly reduced, increasing performance.
Example:
Figure 3-24: Switches in a network.
Managed Switches
A managed switch, also called an intelligent switch, is one that includes functions that
enable you to monitor and conп¬Ѓgure its operation. Typically, you connect to the switch
using special software or via a dedicated management port.
Port Mirroring
Port mirroring is the practice of duplicating all traffic on one port in a switch to a second port, effectively sending a copy of all the data to the node connected to the second
port. Port mirroring is useful as a diagnostic tool when you need to monitor all traffic
going to a particular port or node with minimal impact on the network performance.
Channel Bonding
Channel bonding is the process of increasing throughput as it uses channels to bind
multiple NICs to a MAC address. Channel bonding is performed on the Data Link
layer. Channel bonding is also referred to as NIC bonding.
Lesson 3: Network Media and Hardware
105
Copyright В© Element K Corporation
LESSON 3
Trunking
Trunking involves combining multiple network connections to increase bandwidth and
reliability. Trunking is also known as link aggregation, port teaming, and NIC bonding,
among other names. While there are a variety of manufacturer implemented techniques, IEEE 802.1AX-2008 deп¬Ѓnes a standard for link aggregation and resolves some
issues with earlier deп¬Ѓnitions.
Linking two 1 Gbps ports on a server to two 1 Gbps ports on a switch can result in 2
Gbps aggregate throughput. Depending on the implementation, this can result in a
redundant connection in case one of the cables or ports fails. However, this still leaves
the possibility of the entire switch failing, so some hardware vendors provide proprietary methods for trunking ports across two physically separate switches. Trunking can
be used to connect a variety of network hardware, including switch to switch, server to
switch, server to server, or switch to router.
Steps to Install and Conп¬Ѓgure a Switch
Virtual Switches
A virtual switch is a software-based switch that provides functionality similar to physical
switches. Used to connect systems on a virtual network, a virtual switch contains a core forwarding unit that forwards packets to the correct virtual systems. Virtual switches check the
MAC address of each packet like a physical switch, and forwards the packet to one or more
virtual ports for transmission. It also contains a VLAN tagging unit, a packet п¬Ѓltering unit, and
a security unit. Traffic cannot directly п¬‚ow from one virtual switch to another in the same host
network. All network traffic from external virtual networks is routed through a physical switch
to its destination. Two virtual switches or VLANs cannot communicate directly, and you need
to conп¬Ѓgure a router to forward packets.
Switch Installation and Conп¬Ѓguration
Procedure Reference:
To install and conп¬Ѓgure a switch:
1.
Purchase a switch that will meet your network requirements.
2.
Determine the placement for the switch. You will need to consider:
вЂў
Where are the devices you wish to connect to the switch located?
3.
вЂў
How long will the cable run between the switch and each node be?
вЂў
Is there access to a power outlet?
вЂў
Will the switch need to be physically secured?
вЂў
Do you need access to a wired network drop?
Run the appropriate cabling from each node to the switch.
вЂў
Ensure that you properly terminate the cables at both ends.
вЂў
Label the cables or drops on both ends so that there is no confusion as to
how the cables need to be connected.
4.
Plug the ends of the cables into the ports on the nodes and the switch.
5.
Use an appropriate network cable to connect the switch to the rest of the network.
CompTIAВ® Network+В® (Exam N10-005)
106
Copyright В© Element K Corporation
LESSON 3
If you are connecting to another network device rather than an individual workstation and the
switch has an uplink port, use it. You may need to use a crossover cable to make the connection.
6.
Power on the switch.
7.
Unmanaged switches do not need to be conп¬Ѓgured. If it is a managed switch, conп¬Ѓgure the desired settings:
8.
9.
вЂў
Consult your network documentation for conп¬Ѓguration parameters.
вЂў
Consult the device manufacturerвЂ™s documentation for information on how to
conп¬Ѓgure and use the deviceвЂ™s capabilities and settings.
Test the switchвЂ™s functionality:
вЂў
Check LED lights on the front of the switch to make sure it is operational
and the necessary ports are active.
вЂў
Ping other computers attached to both the switch and other portions of the
network.
вЂў
Use software tools to monitor the signal strength, packet loss, and connection
speed.
вЂў
Connect to internal network shared folders to check network access.
вЂў
Connect to the Internet.
Document your actions and results, including any exceptions for future reference.
Routers
Deп¬Ѓnition:
A router is a networking device that connects multiple networks that use the same protocol. Routers send data between networks by examining the network addresses
contained in the packets they process. Routers can work only with routable protocols,
which are network protocols that provide separate network and node addresses. A
router can be a dedicated device, incorporated into a multi-function device, or can be
implemented as software running on a node, typically with two NICs, with one NIC
being the nodeвЂ™s primary network adapter and the other NIC acting as the router.
Example:
Figure 3-25: Router on a network.
Lesson 3: Network Media and Hardware
107
Copyright В© Element K Corporation
LESSON 3
Rollover Cables
A rollover cable is a cable used to connect a computer to a router. It is often necessary
to use a rollover cable to perform initial setup and conп¬Ѓguration, or troubleshooting of
routers. The rollover cable connects to the routerвЂ™s console port on one end, and to a
computerвЂ™s serial port on the other.
The term вЂњrolloverвЂќ is used because the wires are reversed at one end; going from one
to eight on end A and from eight to one on end B. Rollover cables are usually differentiated by being п¬‚at instead of round, and their outer jacket is often a unique color
such as yellow or light blue. Some rollover cables have Ethernet connectors on both
ends and will need a DB-9 (RS-232) or RJ-45 adapter to connect to a serial port.
Steps to Install and Conп¬Ѓgure a Router
Router Installation and Conп¬Ѓguration
Procedure Reference:
To install and conп¬Ѓgure a router:
1.
Ensure that you purchase a router that will meet the needs of your network.
2.
Determine the correct placement for the router. You need to consider:
вЂў
Where are the nodes you wish to connect to the router located?
3.
вЂў
How long will the cable run between the router and each node be?
вЂў
Is there access to a power outlet?
вЂў
Is the router physically secured?
вЂў
Do you need access to a wired network drop?
вЂў
Do you need to make considerations for wireless networking?
Run the appropriate type of cabling from each node to the router.
вЂў
Ensure that all cables are properly terminated at both ends.
вЂў
4.
Label the cables or drops on both ends so that there is no confusion as to
where the cables go.
Use an appropriate network cable to connect the router to the rest of the network.
If you are connecting to another network device rather than an individual workstation and the
router has an uplink port, use it. You may need to use a crossover cable to make the connection.
5.
Power on the router.
6.
Conп¬Ѓgure the desired settings:
вЂў
Consult the network documentation for conп¬Ѓguration parameters such as
subnetting parameters, routing protocol conп¬Ѓguration, and router connection
settings.
вЂў
7.
Consult the device manufacturerвЂ™s documentation for information on how to
conп¬Ѓgure and use the deviceвЂ™s capabilities and settings.
Test the routerвЂ™s functionality:
вЂў
Ping other computers attached to both the router and other portions of the
network.
CompTIAВ® Network+В® (Exam N10-005)
108
Copyright В© Element K Corporation
8.
LESSON 3
вЂў
Run a traceroute command from your node to other nodes that you
know the new router should be servicing.
вЂў
Use software tools to monitor the signal strength, packet loss, and connection
speed.
вЂў
Connect to internal network shared folders to check network access.
вЂў
Connect to the Internet.
Document your actions and their results, including any exceptions for future reference.
Gateways
Deп¬Ѓnition:
A gateway is a device, software, or a system that converts data between incompatible
systems. This function differentiates it from the router, which can interconnect networks that use similar protocols only. Gateways can translate data between different
operating systems, or email formats, or between totally different networks. A gateway
can be implemented as hardware, software, or both. You can also install gateways as
software within a router, allowing the router to act as a gateway when required, and
eliminating the need for separate hardware.
It is important not to confuse a gateway with the default gateway in TCP/IP, which just forwards IP
data packets.
Example:
Figure 3-26: A gateway connecting a LAN to a WAN.
Virtual Servers
A virtual server is remote software that can run its own operating systems or applications,
similar to a physical server. A virtual server is composed of only software components and
behaves similar to a real computer. A virtual server has characteristics similar to a physical
computer and contains its own virtual software-based CPU, RAM, hard drive, and NIC. An
operating system will behave in the same manner on both virtual and physical servers because
Lesson 3: Network Media and Hardware
109
Copyright В© Element K Corporation
LESSON 3
it cannot differentiate between the two. Similarly, there will not be any major functionality
changes in the way applications or computer networks behave in a virtual server environment.
Virtual servers offer distinct advantages over physical servers such as the ability to perform
administrative tasks remotely and at lower costs.
Virtual Desktop
Virtual desktop is a feature of the operating system that allows multiple desktops to be
open instead of the default single desktop. On the supported operating system, users
can specify the default number of desktops. Virtual desktop is supported on most
Linux distributions. Windows require additional software to be installed for enabling
virtual desktop. Virtual desktop will be useful when a user needs to have multiple windows open without cluttering their desktop.
Virtual PBX
A virtual PBX is a private communications service provider that provides low cost PBX service. Traditionally, businesses use PBX technology to manage phone-based tasks such as
voicemail, faxing, conference calling, and call routing. A physical PBX system involves a very
high cost investment with expensive hardware that only large businesses could afford. Virtual
PBXs allow smaller businesses to utilize PBX services without the need to purchase, install, or
maintain a physical PBX. Virtual PBX utilizes the traditional Public Switched Telephone Network (PSTN) with Voice over IP (VoIP) technology.
PBX Parachute
Virtual PBX provides a service named the PBX parachute that acts as a disaster recovery capability and keeps the phone service running even in case of power failure.
NaaS
Organizations can purchase networking infrastructure. However, when they do not need it, they
can lease the network вЂ�as a serviceвЂ™ to a client. In this method, service providers lease
resources on the network such as communication services and infrastructure. Network as a Service (NaaS) includes offerings such as Platform as a Service (PaaS) and Infrastructure as a
Service (IaaS). PaaS includes infrastructure and tools from the service provider so that the client does not need to manage them. They can, however, modify the applications deployed and
the conп¬Ѓguration parameters. IaaS includes network resources such as storage systems. The
client can deploy software and add network components such as п¬Ѓrewalls. Wireless service
providers provide their services to subscribers, which is also an implementation of NaaS.
Figure 3-27: NaaS Infrastructure.
CompTIAВ® Network+В® (Exam N10-005)
110
Copyright В© Element K Corporation
LESSON 3
Legacy Network Connectivity Devices
Due to technological advancements in the п¬Ѓeld of networking, some of the network connectivity devices have become outdated. While some of them are no longer available as separate
devices, their functionality is built into devices such as routers and switches.
Network Device
Description
Repeater
A repeater is a device that regenerates a signal to improve signal
strength over transmission distances. By using repeaters, you can exceed
the normal limitations on segment lengths imposed by various networking technologies.
Repeaters are used frequently with coax media, such as cable TV, and
were also deployed in networks that used coax cabling. Most networks
today use twisted pair cabling, and repeaters are not commonly needed.
Wireless network repeaters and bridges are frequently used to extend the
range of a WAP.
Hub
A hub is a networking device used to connect the nodes in a physical
star topology network into a logical bus topology. A hub contains multiple ports to which the devices can be connected. When a data packet
from the transmitting device arrives at a port, it is copied and transmitted to all other ports so that all other nodes receive the packets.
However, only the node to which it is addressed reads and processes the
data while all other nodes ignore it.
Two common types of hubs used were passive and active. A passive hub
simply receives data transmitted from a device to one port and broadcasts it out to the devices connected on all other ports. An active hub
performs the same вЂњreceive then broadcastвЂќ action as a passive hub, and
also regenerates or boosts the signal much like a repeater.
Bridge
A bridge is a network device that divides a logical bus network into
segments. Bridges examine the MAC address of each packet. If the
packet is destined for a node connected to a different port, the bridge
forwards the packet. If the packet is addressed to a node on its own segment, the bridge does not forward the packet. This arrangement reduces
traffic between segments and improves overall network performance.
Lesson 3: Network Media and Hardware
111
Copyright В© Element K Corporation
LESSON 3
ACTIVITY 3-6
Identifying Network Connectivity Devices
Scenario:
In this activity, you will identify the primary types of network connectivity devices.
1.
You need to connect multiple networks that use the same protocol. Which networking
device would best meet your needs?
a) Router
b) Bridge
c) Gateway
d) Switch
2.
Which of these network devices is a common connecting point for various nodes or
segments?
a) Hub
b) Router
c) Gateway
d) Switch
3.
True or False? A gateway subdivides a LAN into segments.
True
False
4.
Which statements are valid for a gateway?
a) It can connect networks with dissimilar protocols.
b) It can be implemented in a router.
c) It can be implemented only as a computer program.
d) It can be implemented as hardware or software.
CompTIAВ® Network+В® (Exam N10-005)
112
Copyright В© Element K Corporation
LESSON 3
Lesson 3 Follow-up
In this lesson, you identiп¬Ѓed network media and networking devices. These components form
the infrastructure of your network. Just as people do not commute without a road, train, or
subway, your data cannot move from computer to computer without media and devices.
Knowledge of the media and devices will help you better understand the п¬‚ow of data, and
detect and troubleshoot transmission issues as they arise on your network.
1.
Which will you use more frequently in your networks: bounded or unbounded media?
2.
Of the various networking devices, which offers you the best mix of features and functionality?
Lesson 3: Network Media and Hardware
113
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
114
Copyright В© Element K Corporation
LESSON 4
LESSON 4
Lesson Time
1 hour(s), 50 minutes
Network Implementations
In this lesson, you will identify the major types of network implementations.
You will:
вЂў
Identify the components of an Ethernet network implementation.
вЂў
Identify the components of a wireless network implementation.
Lesson 4: Network Implementations
115
Copyright В© Element K Corporation
LESSON 4
Introduction
In the previous lesson, you identiп¬Ѓed the different types of transmission media, noise control,
and the various network connectivity options. All of these network connectivity methods are
used in different types of network implementations. In this lesson, you will identify the major
types of network implementations.
Networking is a fundamental aspect of all computer infrastructure. The ability to link and communicate between clients, servers, and mainframes is vital for the dissemination of voice and
data traffic. As a network engineer, you will need to handle different types of networks. You
need to be aware of the characteristics of the different types of networks to implement the
most suitable network such that its performance is fully optimized.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
вЂў
Topic A:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.3 Explain the purpose and properties of IP addressing.
вЂ”
3.7 Compare and contrast different LAN technologies.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
вЂ”
2.4 Given a scenario, troubleshoot common wireless problems.
вЂ”
3.3 Compare and contrast different wireless standards.
TOPIC A
Ethernet Networks
In this lesson, you will identify major types of standard network implementations. The most
pervasive standard in the majority of todayвЂ™s LAN implementations is Ethernet. In this topic,
you will learn how devices and resources are connected using the Ethernet technology.
Ethernet continues to dominate the wired LAN scenario, and is known for its simplicity and
wide applicability. Its popularity can be owed to its ease of installation and upgradability. Networks both large and small utilize the Ethernet technology to provide both backbone and enduser services. Due to the wide deployment of Ethernet today, you will be required to manage
and troubleshoot Ethernet networks.
Ethernet
Ethernet is a set of networking technologies and media access methods speciп¬Ѓed for LANs.
Ethernet allows computers to communicate over small distances using a wired medium.
Ethernet has evolved as the most widespread technology for wired LANs. Most Ethernet networks use twisted pair cables in their subnetworks and optical п¬Ѓbers or coaxial cables in the
network backbone. IEEE has deп¬Ѓned the 802.3 speciп¬Ѓcations and standards for Ethernet implementations.
CompTIAВ® Network+В® (Exam N10-005)
116
Copyright В© Element K Corporation
LESSON 4
Figure 4-1: An Ethernet network implementation.
Switched Ethernet
Switched Ethernet is a LAN technology that connects computers using switches. The switch
enables the device to utilize the full bandwidth of the medium. In switched Ethernet, switches
recognize the destination address and route the packet only to the destination node. Thus, a
switch can route multiple packets to different destinations simultaneously.
Figure 4-2: Switches on an Ethernet network.
Ethernet Frames
An Ethernet frame is a data packet that has been encoded on the Data Link layer for transmission from one node to another on an Ethernet network. The basic Ethernet frame is broken
down into seven п¬Ѓelds as shown in the graphic.
Figure 4-3: Fields in an Ethernet frame.
Lesson 4: Network Implementations
117
Copyright В© Element K Corporation
LESSON 4
Ethernet Frame
Field
Description
Preamble (PRE)
(7 bytes) A pattern of ones and zeros used to signal the start of the frame and
provide synchronization and timing information. The preamble notiп¬Ѓes all nodes
that there is data to follow.
Start-of-Frame
Delimiter (SFD)
(1 byte) The SFD identiп¬Ѓes the beginning of the data п¬Ѓeld.
Destination Address
(DA)
(6 bytes) This is the MAC address of the computer to which the frame is being
transmitted; it can be a unicast, multicast, or broadcast address.
Source Address (SA)
(6 bytes) This is the MAC address of the computer transmitting dataвЂ”the SA is
always a unicast address.
Frame type
(2 bytes) This is the length of the entire Ethernet frame in bytes, or the frame
type ID of the frame. This п¬Ѓeld can hold a value between 0 and 65,534, but the
maximum value is usually less than 1500.
Data
(n bytes) The payload of the frame (or the information being sent). It must be a
minimum of 46 bytes long and can be a maximum of 1500 bytes. If the length
of data is less than 46 bytes, the data п¬Ѓeld must be extended by adding a п¬Ѓller to
increase the length to a minimum of 46 bytes.
Frame Check
Sequence (FCS)
(4 bytes) The FCS checks the frame using a 32вЂ“bit Cyclic Redundancy Check
(CRC) value. The FCS allows the receiving device to detect errors in the
Ethernet frame and reject it if it appears damaged.
MAC Addresses
Deп¬Ѓnition:
A MAC address, also called a physical address, is a unique, hardware-level address
assigned to every networking device by its manufacturer. MAC addresses are six bytes
long. The п¬Ѓrst three bytes uniquely identify the manufacturer and are referred to as the
Organizationally Unique Identiп¬Ѓer (OUI). The remaining three bytes identify the
device itself and are known as the Universal LAN MAC address. MAC addresses
make use of an IEEE standard called the Extended Unique Identiп¬Ѓer (EUI). A host
computer implemented with EUI-64 can assign to itself a 64-bit IPv6 interface identiп¬Ѓer automatically.
The OUI may also be called the Block ID and the Universal LAN MAC address may also be called the
Device ID.
Example:
Figure 4-4: A MAC address.
CompTIAВ® Network+В® (Exam N10-005)
118
Copyright В© Element K Corporation
LESSON 4
ACTIVITY 4-1
Identifying the Local MAC Address
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
You are logged in as the administrator for the domain Child##.Classnet. Your password is
!Pass1234.
Scenario:
In this activity, you will identify your computerвЂ™s MAC address.
What You Do
1.
Open the Local Area Connection
Status dialog box.
How You Do It
a. Choose Startв†’Control Panel.
b. In the Control Panel window, click the
Network and Internet link.
c. In the Network and Internet window, click
the Network and Sharing Center link.
d. In the Network and Sharing Center window, on the left pane, click Change
adapter settings.
e. In the Network Connections window,
right-click Local Area Connection and
choose Status.
2.
Identify your computerвЂ™s MAC
address.
a. In the Local Area Connection Status dialog box, click Details.
b. In the Network Connection Details dialog
box, identify the Physical Address value
to determine your computerвЂ™s MAC
address.
c. Close all open dialog boxes and windows.
Lesson 4: Network Implementations
119
Copyright В© Element K Corporation
LESSON 4
Networking Standards
Deп¬Ѓnition:
A networking standard is a set of speciп¬Ѓcations, guidelines, or characteristics applied
to network components to ensure interoperability and consistency between them. Standards determine all aspects of networking such as the size, shape, and types of
connectors on network cables as well as the number of computers that can connect to
the network.
Example:
The IEEE 802.3 standard is used to standardize Ethernet network implementations by
providing networking speciп¬Ѓcations and characteristics.
Formalization of Standards
Standards can be de facto, meaning that they have been widely adopted through use, or
de jure, meaning that they are mandated by law or have been approved by a recognized body of experts.
To help recall which is which, you can think of words like jury and jurisdiction, which are words related
to the legal system. These words, and the term de jure, come from the same Latin root.
Standards Organizations
Standards organizations issue standards that are important in the п¬Ѓeld of computer networking.
Standards Organization
Description
ISO
International Organization for Standardization, ISO, is the largest
standards-development body in the world, comprising the national standards institutes of 162 countries. It is a non-governmental organization
issuing voluntary standards in п¬Ѓelds from agriculture to textiles.
Of most signiп¬Ѓcance for networking, in 1984, the ISO developed a reference model called the Open Systems Interconnection (OSI) model. The
OSI model is a seven-layered framework of standards and speciп¬Ѓcations
for communication in networks. The short name ISO is not an abbreviation for the name of the organization in any particular language, but was
derived from the Greek word isos, meaning equal.
Website: www.iso.org
IEEE
Institute of Electrical and Electronics Engineers, IEEE, is an organization
dedicated to advancing theory and technology in electrical sciences. The
standards wing of IEEE issues standards in areas such as electronic communications, circuitry, computer engineering, electromagnetics, and
nuclear science.
Website: www.ieee.org
CompTIAВ® Network+В® (Exam N10-005)
120
Copyright В© Element K Corporation
LESSON 4
Standards Organization
Description
ANSI
American National Standards Institute, ANSI, is the national standards
institute of the United States that facilitates the formation of a variety of
national standards, as well as promoting those standards internationally.
Individually accredited standards bodies perform the standards development under ANSIвЂ™s guidance. The best-known ANSI standard in the
computer world is a method for representing keyboard characters by
standard four-digit numeric codes.
Website: www.ansi.org
TIA and EIA
Telecommunications Industry Association, TIA, and Electronic Industries
Alliance, EIA, are two trade associations accredited by ANSI to develop
and jointly issue standards for telecommunications and electronics.
Website: www.tiaonline.org and www.eia.org
IETF
The Internet Engineering Task Force, IETF, an international open committee, consists of working groups, committees, and commercial
organizations that work together to develop and maintain Internet standards and contribute to the evolution and operation of the Internet. All
published Internet standards documents, known as Requests For Comments (RFCs), are available through the IETF.
Website: www.ietf.org
IEEE 802.x Standards
The 802.x standards are a family of networking standards developed by the IEEE in 1980 to
address the rapid developments in the networking technology. The 802.x standards are divided
into subcategories to address different networking requirements.
802.2 and 802.3 are two of the most commonly used IEEE standards in the 802.x series.
IEEE Standard
Description
802.2
The 802.2 standard was developed to address the need for MAC-sub-layer
addressing in switches. The 802.2 standard speciп¬Ѓes the frame size and transmission rate. Frames can be sent over Ethernet and Token ring networks using
either copper or п¬Ѓber media.
802.3
The original Ethernet network implementation was developed by XeroxВ® in the
1970s. The IEEE issued the 802.3 speciп¬Ѓcation to standardize Ethernet and
expand it to include a wide range of cable media. In addition to the media type,
802.3 also speciп¬Ѓes transmission speeds and the signaling method. This type of
network is most efficient in a physical star/logical bus topology.
The 10Base Standards
The 10Base standards describe the media type and the speeds at which each type of media
operates. The cable standard speciп¬Ѓcation contains three components: a number indicating
media speed, the signal type in baseband or broadband, and a code for either copper or п¬Ѓber
media.
Lesson 4: Network Implementations
121
Copyright В© Element K Corporation
LESSON 4
Figure 4-5: Media types and the transmission speeds of the 10Base standard.
10 Mbps Ethernet
There are several standards and speciп¬Ѓcations for 10 Mbps Ethernet.
Standard
IEEE Speciп¬Ѓcation
Medium
Distance (meters)
10Base-2
802.3a
Thinnet coax
185
10Base-5
802.3
Thicknet coax
500
10Base-T
802.3i
CAT5 UTP
100
10Base-F
802.3j
Fiber
2000
10Base-FB
802.3j
Fiber
2000
10Base-FL
802.3j
Fiber
2000
10Base-FP
802.3j
Fiber
500
Fast Ethernet
Fast Ethernet is an Ethernet technology that can transmit data at speeds of 100 Mbps. The
maximum length of the cable is limited to 250 meters and can use either coaxial cables or
optical п¬Ѓbers. It is used as a backbone network to interconnect several LANs.
Fast Ethernet Standards
There are several standards and speciп¬Ѓcations for 100 Mbps or Fast Ethernet. In copper, 100Base-TX is the most widely used medium for Fast Ethernet. It uses two pairs
of category 5 cables. 100Base-T2 uses two copper wire pairs. In п¬Ѓber, 100Base-FX
implements Fast Ethernet over optical п¬Ѓber. It uses two strands of the п¬Ѓber, one to
transmit and the other to receive.
Standard
IEEE Speciп¬Ѓcation
Medium
Distance (m)
100Base-T
802.3u
CAT5 UTP
100
100Base-T4
802.3u
CAT3, 4, or 5 UTP
100
CompTIAВ® Network+В® (Exam N10-005)
122
Copyright В© Element K Corporation
LESSON 4
Standard
IEEE Speciп¬Ѓcation
Medium
Distance (m)
100Base-TX
802.3u
CAT5 UTP
100
100Base-FX
802.3u
Multimode or single mode
п¬Ѓber
412 (half duplex),
2000 (full
duplex), 15,000вЂ“
20,000 (full
duplex)
Gigabit Ethernet
Gigabit Ethernet is an Ethernet technology that can transmit data at speeds of 1000 Mbps and
primarily uses optical п¬Ѓbers for transmission. It can be used for distances ranging from 500 to
5000 meters depending on the type of optical п¬Ѓber used. The hardware required for Gigabit
Ethernet is very expensive when compared with other types of Ethernet.
Gigabit Ethernet Standards
There are several standards and speciп¬Ѓcations for 1000 Mbps or Gigabit Ethernet.
Standard
IEEE Speciп¬Ѓcation
1000Base-T
Medium
Distance (m)
802.3ab
CAT5
CAT6 UTP
100
1000Base-X
802.3z
Shielded
Balanced coax
25 to 5000
1000Base-CX
802.3z
Shielded
Balanced coax
25
1000Base-SX
802.3z
Multimode п¬Ѓber
Wavelength: 850 nm
550 in practice
(220 per speciп¬Ѓcation)
1000Base-LX
802.3z
Single mode п¬Ѓber
Wavelength: 1300 nm
5000
1000Base-LX
802.3z
Multimode п¬Ѓber
Wavelength: 1300 nm
550
1000Base-LH
802.3z
Single mode п¬Ѓber
Wavelength: 1300 nm
10,000
1000Base-LH
802.3z
Multimode п¬Ѓber
Wavelength: 1300 nm
550
10 Gigabit Ethernet
10 Gigabit Ethernet is currently the highest speed at which Ethernet operates. It can
achieve speeds of 10 Gbps, which is 10 times faster than Gigabit Ethernet. Still an
emerging technology, it is also compatible with WAN. There are several standards and
speciп¬Ѓcations for 10 Gbps or 10 Gigabit Ethernet.
Lesson 4: Network Implementations
123
Copyright В© Element K Corporation
LESSON 4
Standard
IEEE Speciп¬Ѓcation
Medium and Characteristics
Speed (in
Gbps)
Distance (m)
10GBase-X
802.3ae
Multimode п¬Ѓber
Wavelength: 850 nm
9.9
65
10GBase-SR
802.3ae
Multimode п¬Ѓber
Wavelength: 850 nm
10.3
300
10GBase-SW
802.3ae
Multimode п¬Ѓber
Wavelength: 850 nm
9.9
300
10GBase-LR
802.3ae
Single mode п¬Ѓber
Wavelength: 1310
nm
Dark п¬Ѓber
10.3
10,000
10GBase-LW
802.3ae
Single mode п¬Ѓber
Wavelength: 1310
nm
Synchronous Optical
Network (SONET)
9.9
10,000
10GBase-ER
802.3ae
Single mode п¬Ѓber
Wavelength: 1550
nm
Dark п¬Ѓber
10.3
40,000
10GBase-EW
802.3a
Single mode п¬Ѓber
Wavelength: 1550
nm
SONET
9.9
40,000
10GBase-T
802.3an
CAT5e, 6, or 7 UTP
10
100
10GBase-CX4
802.3ak
Four thin twin-axial
cables
4 x 2.5
25
A nanometer (nm) is one trillionth of a meter (10-9).
Ring-Based Networks
Token ring and Fiber Distributed Data Interface (FDDI) are commonly used ring-based LAN
technologies deployed on Ethernet networks.
Ring-Based Network Types
Description
Token ring
Token ring is a type of technology used on ring networks in which
computers pass a special sequence of bits called a token between
them. Only the node holding the token can transmit on the network. If
it has no more data to transmit, the node passes the token to the next
computer on the network. Standards dictate how long a node can hold
a token and what happens if the token is damaged or lost. The damaged or lost tokens are renewed automatically every seven seconds.
CompTIAВ® Network+В® (Exam N10-005)
124
Copyright В© Element K Corporation
LESSON 4
Ring-Based Network Types
Description
FDDI
The Fiber Distributed Data Interface (FDDI) is a type of technology
used on ring networks and uses single mode or multi mode п¬Ѓber that
transmits data at a rate of 100 Mbps. Although FDDI has dual п¬Ѓber
rings, only one ring carries data under normal conditions; the second
ring is either idle or carries control signals. When the second ring is
not needed for backup, it can carry data, extending the carrying capacity to 200 Mbps.
ACTIVITY 4-2
Describing Ethernet Networks
Scenario:
In this activity, you will describe the different types of Ethernet networks.
1.
On which networks is Ethernet implemented?
a) WANs
b) MANs
c) PANs
d) LANs
2.
True or False? The 802.2 standard specifies the frame size and transmission rate of the
Ethernet technology.
True
False
3.
Which field of the Ethernet frame provides error detection information?
a) PRE
b) FCS
c) SFD
d) SA
4.
Match the field of an Ethernet frame with its description.
Preamble
Destination address
Source address
Frame type
a.
The MAC address of the computer
receiving data.
b. Signals the start of a frame.
c. The length of the Ethernet frame in
bytes.
d. The MAC address of the computer
transmitting data.
Lesson 4: Network Implementations
125
Copyright В© Element K Corporation
LESSON 4
5.
You have a fiber-based ring network with dual fiber rings. Which technology have you
implemented?
a) Token ring
b) FDDI
c) Switched Ethernet
d) Fast Ethernet
TOPIC B
Wireless Networks
In the previous topic, you identiп¬Ѓed various types of wired LANsвЂ”that is, networks that use
different types of cabling to connect the various nodes. There are also wireless networks that
connect without using a physical media. In this topic, you will identify the components of a
wireless LAN implementation.
Wireless networks are the network of choice in most environments today because they are relatively easy to install and are п¬‚exible. Even more importantly, with users increasingly needing
to connect on the move using different devices, roaming users in both business and leisure
environments want the freedom to use their computers for work or recreation wherever they
are, without a physical connection to the network. With its increasing popularity and widespread appeal, you will undoubtedly be faced with installing, managing, or troubleshooting a
wireless network.
WLANs
Deп¬Ѓnition:
A Wireless LAN (WLAN) is a self-contained network of two or more computers connected using a wireless connection. A WLAN spans a small area, such as a small
building, п¬‚oor, or room. A typical WLAN consists of client systems such as a desktop,
laptop, or PDA and wireless connectivity devices such as access points. The access
points interconnect these client systems in a wireless mode or can connect to a wired
network. WLANs allow users to connect to the local network or the Internet, even on
the move.
CompTIAВ® Network+В® (Exam N10-005)
126
Copyright В© Element K Corporation
LESSON 4
Example:
Figure 4-6: Devices connected in a WLAN.
WLAN Architecture
A WLAN architecture comprises several components.
WLAN Architecture Component
Description
Station (STA)
A device that connects an IEEE 802.11 conformant MAC interface to a
wireless medium with an Ethernet-like driver interface. A wireless STA
contains an adapter card, a PC card, or an embedded device to provide
wireless connectivity.
Access Point (AP)
A device or software that facilitates communication and provides enhanced
security to wireless devices. It also extends the physical range of a
WLAN. The AP functions as a bridge between wireless STAs and the
existing network backbone for network access.
Distribution System (DS)
A wired connection between a BSS and a premise-wide network that
enables mobility to devices and provides access to available network
resources.
Basic Service Set (BSS)
The service set deп¬Ѓnes the way a WLAN is conп¬Ѓgured. There are three
ways to conп¬Ѓgure a WLANвЂ”BSS, IBSS, and ESS.
A set of devices with an AP connected to a wired network and one or
more wireless stations or clients. A BSS can effectively extend the distance
between wireless endpoints by forwarding signals through the WAP.
Extended Service Set
(ESS)
A conп¬Ѓguration of multiple BSSs used to handle mobility on a wireless
network. BSSs are connected to a common distribution system such as a
wired network.
ESS enables users to move their mobile devices, such as laptop computers,
outside of their home BSS while keeping their connection. It also enables
data to be forwarded from one BSS to another through the network backbone.
Independent Basic Service
Set (IBSS)
A peer-to-peer network where each wireless station acts as both a client
and a wireless AP. Each wireless station can both transmit and receive
data.
Lesson 4: Network Implementations
127
Copyright В© Element K Corporation
LESSON 4
Wireless Antennas
Deп¬Ѓnition:
A wireless antenna is a device that converts high frequency signals on a cable into
electromagnetic waves and vice versa. In wireless communication, an antenna is used
to receive or transmit radio waves. The frequency at which an antenna can send or
receive radio waves depends on the physical dimensions of the antenna. The larger the
size of the antenna, the higher the frequency of the wave that antenna can transmit.
You can choose different antenna types to use in different wireless networking situations. Different styles of antennas vary in their gain or signal strength, and the shape
or the radiation pattern of the transmission beam.
Example:
Figure 4-7: A wireless antenna converts high frequency signals on a cable into
electromagnetic waves.
Gain
Gain is an increase in the amplitude of a radio wave. Gain can occur due to the use of
external sources such as ampliп¬Ѓers that amplify a radio signal. It has both positive and
negative effects. Typically, high gain is advantageous but there may be situations where
the amplitude of a radio wave is already very close to the legal value and added power
could be a serious problem.
Wireless Antenna Types
Antennas can be grouped into one of two broad categories.
CompTIAВ® Network+В® (Exam N10-005)
128
Copyright В© Element K Corporation
LESSON 4
Antenna Category
Description
Directional antenna
A type of antenna that concentrates the signal beam in a
single direction. They have a relatively narrow, focused
transmission beam and a relatively high gain. Since they
transmit primarily in a single direction, the sending and
receiving stations must be precisely aligned. The high gain
provides for good signal quality and the narrow beam
ensures that only a narrow transmission area needs to be
clear of interference.Directional antennas are used in a
point-to-point network to connect one station to another.
Directional antennas include the parabolic dish antenna,
backп¬Ѓre antenna, yagi antenna, and panel antenna.
Omni-directional antenna
A type of antenna that radiates the signal beam out in all
directions and has lower gain but a wider coverage area.
The transmission radiates from the antenna in all directions,
generally in a single horizontal or vertical plane, so that the
sending and receiving stations do not need to be as precisely aligned. However, a wider coverage zone means
there are more potential sources of interference, and there
is lower gain because the signal power is not as
focused.Omni-directional antennas are used in multipoint
and distributed networks. Omni-directional antennas include
the ceiling dome or вЂњblisterвЂќ antenna, blade antenna, and
various rod-shaped antennas.
Wireless Antenna Performance Factors
It is important to consider various performance factors before installing antennas for infrared,
radio, or microwave wireless technologies.
Lesson 4: Network Implementations
129
Copyright В© Element K Corporation
LESSON 4
Wireless
Technology
Type
Performance Factors
Infrared
The maximum transmitting distance of an infrared wireless installation is affected by
these factors:
вЂў Bright sunlight
вЂў Obstacles
вЂў Smoke, dust, or fog
Radio
The maximum transmitting distance of a radio wireless installation is affected by all of
these factors:
вЂў
вЂў
вЂў
вЂў
вЂў
вЂў
Microwave
Signal characteristics of the antenna
Environmental conditions
Ambient electrical noise
Conductive obstacles in the path
Presence of other electrical equipment
Data transmission rate
The maximum transmitting distance of a microwave wireless installation is affected by
all of these factors:
вЂў Signal characteristics of the antenna
вЂў Line of sight
вЂў Distance between transmitting stations
The IEEE 802.11 Standard
The 802.11 standard is a family of speciп¬Ѓcations developed by the IEEE for the wireless LAN
technology. 802.11 speciп¬Ѓes an over-the-air interface between a wireless client and a base station or between two wireless clients. 802.11 deп¬Ѓnes the access method as CSMA/CA. It
speciп¬Ѓes spread spectrum radio devices in the 2.4 GHz band for reliability. The 802.11b standard also deп¬Ѓnes a multichannel roaming mode and automatic data rate selection.
802.11 Standards
The 802.11 standards provide speciп¬Ѓcations for different wireless technologies.
Standard
Transmission
Speed in Mbps
Frequency in
GHz
Geographic Range
in meters
MIMO
Streams
802.11
2
2.4
20
1
802.11a
54
5
20
1
802.11b
11
2.4
100
1
802.11g
54
2.4
100
1
802.11n
150
2.4 or 5
70
4
The 802.11a standard is not cross-compatible with 802.11b and g.
CompTIAВ® Network+В® (Exam N10-005)
130
Copyright В© Element K Corporation
LESSON 4
Latency
Latency is the time taken by a data packet sent through a wireless connection from a
requesting device to the receiving device and back. Latency includes the time taken for
checking the data packets, correcting errors, and resending data lost in transit. Some of
the 802.11 speciп¬Ѓcations have higher latency when compared to Gigabit Ethernet.
Channels in 802.11b/g Implementations
The 802.11b and g speciп¬Ѓcations deп¬Ѓne a number of distinct channels within the 2.4
GHz band. Due to the way these channels are implemented, there is substantial overlap
in the radio signals. This overlap can cause interference between adjacent APs and clients, resulting in reduced performance. The immediate result is that there are only
three channels that are truly usable when you want to get the best possible performance out of your WLAN. These are channels 1, 6, and 11. In a single AP
conп¬Ѓguration, the choice of channel does not matter. When dealing with an implementation that requires multiple APs to ensure sufficient coverage, best practice is to set
adjacent APs to use different channels, choosing from 1, 6, and 11.
802.11 Modes
The 802.11 standard supports two modes: the infrastructure mode and the ad-hoc mode.
Mode
Description
Infrastructure mode
The infrastructure mode utilizes one or more WAPs to connect workstations to
the cable backbone. Infrastructure mode wireless networks use either BSS or ESS.
Lesson 4: Network Implementations
131
Copyright В© Element K Corporation
LESSON 4
Mode
Description
Ad-hoc mode
The ad-hoc mode, also referred to as IBSS, utilizes a peer-to-peer conп¬Ѓguration in
which each wireless workstation talks directly to other workstations.
802.11 Beacon Frames
Beacon frames are management frames that are 50 bytes long and used to start and maintain
wireless communications. They contain information about the communication process, such as
the SSID, channel number, and security protocol information. Beacon frames are periodically
sent by APs in 802.11 infrastructure networks, and can be conп¬Ѓgured to be sent at various
intervals.
Basic Wireless Network Implementation
By considering several key factors of wireless network installation along with the cost of
implementing and maintaining a secure wireless network, a network professional both demonstrates the proper installation methods and ensures maximum network functionality.
Guidelines:
To implement a basic wireless network, follow these guidelines:
вЂў
Choose the appropriate 802.11 technology for your needs, such as 802.11a, b, g,
or n.
вЂў
Choose the appropriate AP placement locations for your network.
вЂ”
Obtain a scale drawing of the building. This will assist you in all areas of AP
placement.
вЂ”
Determine the range of the AP for the wireless technology you have chosen.
This will help you to better determine how many APs you will need to
ensure adequate coverage for the space.
вЂ”
Balance the number of users who will have access to the AP, and ensure that
the AP can cover all employees in the range of the AP. More employees in a
given area means more APs.
CompTIAВ® Network+В® (Exam N10-005)
132
Copyright В© Element K Corporation
LESSON 4
вЂў
вЂ”
Tour the area in the range of the AP and check to see if there are any devices
that will interfere with the wireless network. This can include devices such as
microwave ovens, Bluetooth-enabled devices, or an existing wireless
networkвЂ”whether from a community network, a neighboring building, or
another п¬‚oor of your companyвЂ™s building. These devices or networks can
possibly interfere with your new implementation.
вЂ”
Consider whether the AP will be exposed or concealed in the ceiling or
placed in a secure room.
вЂ”
Ensure that there are no obstacles in the path of the AP, such as doors, closed
windows, walls, and furniture, that the wireless signal will need to pass
through on its way to a client. If there are too many obstacles in the path,
adjust the placement of your AP accordingly.
Install the APs. The speciп¬Ѓc steps for installing the AP will vary by vendor, but
the common steps may include:
вЂ”
Connecting the AP to a router.
вЂ”
Conп¬Ѓguring the DHCP service as appropriate.
вЂ”
Conп¬Ѓguring the appropriate encryption schemes.
вЂ”
Conп¬Ѓguring channels and frequencies.
вЂ”
Setting the ESSID and an 802.11 beacon.
вЂ”
If necessary, creating an Access Control List (ACL). The ACL contains a list
of users who have access to the wireless network.
вЂ”
Conп¬Ѓguring the network adapters of the devices that will connect to the AP.
вЂў
Test to ensure that the installation is appropriately-sized, secure, and operational.
вЂў
Document the steps and establish a baseline for future installations.
How to Install Wireless Clients
The speciп¬Ѓc installation procedure for installing wireless clients might vary depending
on the hardware and software features of the device. The procedure for installing wireless clients will need to be customized to the requirement of the situation.
To install a wireless client on a computer:
Some computers are pre-installed with a wireless client. In such computers, manual installation of a
wireless client is not necessary.
1.
Observe necessary anti-static precautions such as using an anti-static wrist strap to
remove a buildup of static charges.
2.
Power off the PC and disconnect the power and other cables.
3.
Open the PC case and insert the wireless NIC into a PCI, PCIx, or USB slot.
4.
Close the PC case and reconnect the cables.
5.
Power on the PC.
6.
Install the manufacturer-provided drivers and software.
The operating system may identify and install the necessary drivers automatically;
if not, you may need to install the drivers manually.
7.
Connect to the wireless network with the operating systemвЂ™s built-in utilities (such
as ZeroConf) or the manufacturer provided utility.
Lesson 4: Network Implementations
133
Copyright В© Element K Corporation
LESSON 4
You may also need some access information in order for you to be able to use the
wireless client to connect to the wireless network. The details include:
8.
9.
вЂў
The SSID of the wireless access point.
вЂў
A pre-shared password to access the wireless network.
вЂў
The MAC address of the wireless adapter you wish to add to connect to the
access point.
вЂў
The login information for the administrative interface of the WAP.
вЂў
A pre-assigned static IP address.
Test the Wireless NICвЂ™s functionality. You can do this by performing one or more
of these checks:
вЂў
Check the adapterвЂ™s LED lights to verify that it is connected and is operational.
вЂў
Ping other computers on both the wireless and wired portions of the network.
вЂў
Use software tools to monitor the signal strength, packet loss, and connection
speed.
вЂў
Connect to shared folders on the internal network, if available.
вЂў
Connect to the Internet.
Document the steps for installing the wireless clients on a PC for future reference.
Wireless Access Point Placement
While deciding on placement of WAPs, you need to consider several important factors.
Factor
Description
Building layout
The building layout is a very important factor when deciding on the
positions at which to place WAPs. A scaled building layout of the
coverage area will help in deciding on the areas where you require
wireless access. Also, the layout helps in locating strategic spots
where you can place the WAPs.
Coverage area
The area covered by an access point is called a cell. If the cell area
is large, then you need to consider increasing the number of WAPs.
Overlapping cells with multiple access points provide continuous
access for devices.
Clients
The number of clients accessing the WAP plays a major role in
deciding on the placement of the WAP. Depending on the number of
clients, you need to decide on the number of WAPs to install.
Obstacles
Obstacles in the path of transmission of RF waves sometimes absorb
the signals when they pass through, resulting in signal loss. Avoiding
obstacles such as doors, walls, and windows between access points
and devices can considerably reduce signal loss.
Interference
Radio frequency interference from other devices can affect signals
from WAPs. Removing other devices that can cause radio frequency
interference will signiп¬Ѓcantly reduce signal interference.
How to Install a Wireless Repeater
To install a wireless repeater, consider the following guidelines:
CompTIAВ® Network+В® (Exam N10-005)
134
Copyright В© Element K Corporation
LESSON 4
1.
2.
Determine the placement for a repeater.
вЂў
Physically, where does performance drop off on the existing wireless network?
вЂў
Is there access to a power outlet?
вЂў
Will the device be physically secure?
вЂў
If necessary, is there access to a wired network drop?
Set up the repeater to work with your wireless network.
If your repeater has a wired network port:
3.
4.
a.
Connect one end of an Ethernet cable to an active network drop and connect
the other end to a repeater.
b.
Plug-in and power-on the repeater.
c.
Enter the setup utility (usually on a ROM or through the deviceвЂ™s built-in
web interface).
d.
Conп¬Ѓgure the appropriate WLAN settings.
e.
Save the conп¬Ѓguration.If your repeater does not have a wired network port:
a.
Make sure that the repeater is within range of the WLAN you wish to
expand.
b.
Plug-in and power-on the repeater.
c.
Initiate the repeaterвЂ™s auto-setup functionality.
Test the repeaterвЂ™s functionality by connecting a wireless client to the WLAN:
вЂў
Ping other computers and observe the round-trip latency.
вЂў
Monitor the clientвЂ™s wireless signal strength using software tools.
вЂў
Connect to shared internal network locations.
вЂў
Connect to the Internet.
In case performance of the repeater does not improve, reassess its placement and
conп¬Ѓguration.
Example: Implementing a Wireless Network
As a network administrator, Matt is concerned with the proper implementation of his
companyвЂ™s wireless network to ensure maximum company-wide efficiency. He has read
through several reference materials related to wireless network installation, and has
gathered the appropriate tools.
The company has many different available locations for access points, and Matt has
decided where the best access points for the wireless network will be.
The installation of the access point covers several tasks including conп¬Ѓguring the
appropriate wireless encryption standards, as well as conп¬Ѓguring all wireless channels
and frequencies, along with setting the ESSID and beacon interval for the network.
Once the wireless network installation and implementation is complete, it needs to be
veriп¬Ѓed. Matt accesses the network from both inside and outside the building, he
attempts to log on using a non-corporate laptop, and he tries to capture data packets
from the parking lot. He also wanders around the building with a laptop and notes
where he loses the signal.
Lesson 4: Network Implementations
135
Copyright В© Element K Corporation
LESSON 4
ACTIVITY 4-3
Identifying a Wireless Network Implementation
Scenario:
In this activity, you will identify the components of a wireless network implementation.
1.
True or False? Infrastructure mode wireless networks use either BSS or ESS.
True
False
2.
Select the characteristics of directional antennas.
a) Used in point-to-point networks
b) Have low gain
c) Transmit narrow and focused beams
d) Are prone to interference
3.
Your company has installed a wireless network. There are ceiling dome transmitters at
various locations in your building, and you have upgraded the usersвЂ™ laptops with wireless NICs. There is one wireless antenna to serve the warehouse area. The coverage
area is adequate; however, users in the warehouse report intermittent connectivity
problems as they move in and out of the tall metal storage shelving. What problem do
you suspect?
Lesson 4 Follow-up
In this lesson, you identiп¬Ѓed the major types of network implementations. The knowledge of
major network implementations and the advantages and disadvantages of these will allow you
to choose the right implementation when you set up a network.
1.
What are some of the challenges that you might face when implementing a wireless
network and how do you plan to overcome these challenges?
CompTIAВ® Network+В® (Exam N10-005)
136
Copyright В© Element K Corporation
LESSON 4
2.
In your opinion, what is the significance of Ethernet standards on networks today?
Lesson 4: Network Implementations
137
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
138
Copyright В© Element K Corporation
LESSON 5
LESSON 5
Lesson Time
1 hour(s), 30 minutes
Networking Models
In this lesson, you will identify the components of a TCP/IP network implementation.
You will:
вЂў
Identify the constituent layers and purpose of the OSI model.
вЂў
Identify the constituent layers and purpose of the TCP/IP model.
Lesson 5: Networking Models
139
Copyright В© Element K Corporation
LESSON 5
Introduction
You are familiar with major types of network implementations. All networks follow a common
network model to communicate and transmit data. In this lesson, you will identify the Open
Systems Interconnection (OSI) and TCP/IP network models.
Data communication over a network is a structured process and is governed by certain models.
The OSI model breaks the data communication process into simpler stages, which will help
you learn it in a step-by-step manner for better understanding. The OSI model is the simplest
model of its type, and understanding it will enable you to understand other models such as the
TCP/IP network model. Being able to identify the various layers of network models and their
purpose will enable you to design and troubleshoot different types of networks effectively and
quickly.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
1.1 Compare the layers of the OSI and TCP/IP models.
вЂў
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂў
1.6 Explain the function of common networking protocols.
TOPIC A
The OSI Model
In the previous lesson, you identiп¬Ѓed the various network types of network implementations.
These implementations are built on common network standards and models of networking to
understand how these devices and protocols interconnect. In this topic, you will identify how
these devices utilize an important common standard, the OSI model.
Data communication over a network is a structured process and is governed by certain models.
The OSI model breaks the data communication process into deп¬Ѓnite stages with each stage
corresponding to one of its layers. The OSI model has been implemented in many types of
networks. Being able to identify the OSI layers and their purpose will enable you to plan the
implementation of a network according to the devices, protocols, and transmission methods
needed.
The OSI Reference Model
The Open Systems Interconnection (OSI) reference model is a network model developed by the
ISO for communication in open system networks. The OSI reference model divides the data
communication process into seven tasks, which are grouped into different layers. Each layer is
a collection of related functions, protocols, and devices that work at that layer. Every layer is
designed to link the layers above it. While a layer provides services to the layer above, it
requests service from the layer below. The seven layers of OSI, from lowest to highest, are the
Physical layer, the Data Link layer, the Network layer, the Transport layer, the Session layer,
the Presentation layer, and the Application layer.
It can be difп¬Ѓcult to remember the correct sequence of the OSI layers, it is easy to remember them from the top
down, using the mnemonic вЂњAll People Seem To Need Data Processing.вЂќ
CompTIAВ® Network+В® (Exam N10-005)
140
Copyright В© Element K Corporation
LESSON 5
Figure 5-1: Layers in the OSI reference model.
The OSI model was developed by the ISO in the early 1980s and the organization continues to maintain the standard.
Open System Networks
An open system network is a network that supports multiple communication protocol
suites that different vendors develop. Prior to open system networks, communication
protocols were largely vendor-speciп¬Ѓc and proprietary applications, such as Systems
Network Architecture (SNA) by IBMВ®, AppletalkВ® by AppleВ®, and Internetwork
Packet Exchange (IPX) by NovellВ®. Due to the lack of common communication protocols, the devices of one vendor were not compatible with those of another and so
communication was not possible on a network that contained devices from different
vendors. Open system networks were developed to create a common network standard
and provide a common protocol suite to all the devices.
OSI Functional Blocks
The layers in the OSI reference model can be classiп¬Ѓed into two functional blocks:
application support and network support.
Functional Block
Description
Application support
The application support block consists of the upper three layers:
Application, Presentation, and Session. Connecting software programs to the network is the primary responsibility of this functional
block.
Network support
The network support block is made up of the lower four layers:
Transport, Network, Data Link, and Physical. Moving data on the
network is the primary responsibility of this functional block.
Lesson 5: Networking Models
141
Copyright В© Element K Corporation
LESSON 5
Layer 1: The Physical Layer
The Physical layer provides the means for transmitting data packets over a physical medium.
It speciп¬Ѓes the electrical and mechanical characteristics, such as the voltage, frequency, and
transmission medium of the network. The Physical layer receives fully formatted data packets
from the Data Link layer and places them on the media. Network adapters and WAPs are some
of the devices that operate at this layer. Therefore, the Physical layer determines the mode and
medium of data transmission, which are factors that affect transmission speeds. Technologies
that function at this layer include Ethernet, Fast Ethernet, Asynchronous Transfer Mode (ATM),
token ring, and FDDI.
Transmission of Data Packets
A packet is a unit of data transmitted on a network. All packets contain three parts:
header, data, and footer or trailer. If a sender transmits a packet and the recipient is
busy, the sender sits idle until it receives the acknowledgment, after which it sends the
next packet.
Design Considerations at the Physical Layer
The Physical layer affects some of the network design considerations including:
вЂў
Bandwidth of the transmission medium
вЂў
Type of transmission medium
вЂў
Switching technologies
вЂў
Mode of transmission (wired or wireless)
вЂў
Analog or digital transmission
вЂў
Modulation
Multilayer Devices
Some network devices can perform tasks deп¬Ѓned by more than one layer and function
across layers. Such devices are known as multilayer devices. Some of the multilayer
devices are WAPs and gateways. Hubs and repeaters were also multilayer devices.
Layer 2: The Data Link Layer
The Data Link layer is responsible for transferring data packets between adjacent network
nodes without any errors. After sending the packets, the Data Link layer waits for an acknowledgment from the receiving devices. It performs many functions on the network and is
responsible for:
вЂў
Grouping data bits into frames and attaching the address of the receiving node to each
frame, thus forming a data packet.
вЂў
Error-free transfer of data packets between nodes on the network. After transmitting data
packets, the Data Link layer awaits an acknowledgment from receiving devices to accomplish this.
вЂў
Adding error correction and detection codes to frames to perform error checks and corrections.
Switches operate at the Data Link layer. The Point-to-Point Protocol (PPP) and Serial Line
Internet Protocol (SLIP) are protocols that operate at this layer.
The Data Link layer can be divided into two sub-layers: the Logical Link Control (LLC) sublayer and the Media Access Control (MAC) sub-layer.
CompTIAВ® Network+В® (Exam N10-005)
142
Copyright В© Element K Corporation
LESSON 5
Sub-Layer
Description
LLC
The LLC sub-layer is responsible for identifying Network layer
protocols and for encapsulating those protocols so that multiple
upper-layer protocols can share the same media. It controls how
frames are placed on the media by controlling the Physical layer
device.
The LLC sub-layer checks the CRC of the frame, and either ACKs
or NACKs the data. It also controls data п¬‚ow so that at any point,
data transmission does not exceed the bandwidth of the network
medium. An LLC header tells the Data Link layer how to handle
the frame it receives.
MAC
The MAC sub-layer deп¬Ѓnes how packets are placed on the media.
In a contention-based network, the MAC sub-layer is responsible
for the carrier sense to detect collision; in a token passing network,
it is responsible for the token.
For example, in an Ethernet network, which uses contention-based
media access, the MAC sub-layer controls elements of addressing
such as error notiп¬Ѓcation, the frame delivery sequence, and п¬‚ow
control.
Do not confuse the MAC sub-layer with the MAC address. While the MAC sub-layer deп¬Ѓnes how packets are
transferred on the media, MAC address is a unique physical address that is assigned by the network manufacturer to each network device.
Network Acknowledgments
A network acknowledgment is a signal used by a communication protocol between
nodes on a network to acknowledge the receipt of data. Typically, two types of
acknowledgment notiп¬Ѓcations are sent on a network. Acknowledgment notiп¬Ѓcations can
either be positive (ACK) to indicate successful receipt sent from the receiving node to
the sending node once the token reaches its destination; or negative (NACK) that can
indicate a bad transmission. Alternatively, a node can also send an REJ signal to indicate rejection of data or an Automatic Request for Retransmission (ARQ).
Layer 3: The Network Layer
The Network layer of the OSI model is responsible for addressing data packets, routing the
packets from a source to the destination through the network, and ensuring data delivery. This
characteristic differentiates the Network layer from the Data Link layer, which deals with the
transmission of data only between adjacent nodes. The presence of too many packets on the
network simultaneously may lead to collisions.
Routers and some switches operate at the Network layer. The responsibility of controlling congestion on the network by taking proper routing decisions belongs to this layer. It also deп¬Ѓnes
protocols for interconnecting two or more similar networks such as: IP, Address Resolution
Protocol (ARP), Dynamic Host Conп¬Ѓguration Protocol (DHCP), Internet Control Message
Protocol (ICMP), Routing Information Protocol (RIP), Border Gateway Protocol (BGP), Open
Shortest Path First (OSPF), and Internet Group Management Protocol (IGMP).
There are two main types of switches. Layer 2 switches operate at the Data Link layer of the OSI model. Layer 3
switches operate at the Network layer of the OSI model.
Lesson 5: Networking Models
143
Copyright В© Element K Corporation
LESSON 5
Layer 4: The Transport Layer
The Transport layer accepts data from upper layers, and breaks it into smaller units known as
segments. It then passes these segments to the lower layers, and ensures that all segments
arrive correctly at the receiving end. Because the segments may not be transmitted in
sequence, they may arrive out of sequence. The Transport layer adds a sequence number to
each segment, which helps reconstruct the original sequence of segments in case of out of
order sequencing. The Transport layer is also responsible for error correction and sending
acknowledgments at the network level.
The Transport layer also deп¬Ѓnes protocols for interconnecting networks that use different protocols. Gateways operate at this layer and at higher layers of the OSI model. Examples of
protocols that function at this layer include TCP, User Datagram Protocol (UDP), IP Security
(IPSec), Point-to-Point Tunneling Protocol (PPTP), Remote Desktop Protocol (RDP), and
Layer Two Tunneling Protocol (L2TP).
Network- and Transport-Layer Protocols
The Network and Transport layers contain several protocol families that are categorized based
on functions they perform.
Protocol Family
Function
Reliability protocols
Provide a method of ensuring reliable data transfer. For example, a
header or trailer might contain a Checksum value or request that
you need to acknowledge received data by sending an acknowledgment message back to the sender.
Connection protocols
Establish and maintain a connectionless or connection-oriented
service for the upper layers. In a connection-oriented service, the
sending and receiving nodes maintain constant communication to
mediate the transfer of data. Sequencing, п¬‚ow control, and reliability are monitored at both ends.
In a connectionless service, the message is packaged, delivered,
and sent. The message is transferred only if communication exists
between the two nodes.
Routing protocols
Provide a method of ensuring data transfer to the correct destination. In an unswitched network, routing is virtually unnecessary
because the nodes are directly connected. In a switched network,
however, the routing protocol determines the path a packet will
take to reach its destination. This function is particularly important
and complex in a packet-switched network, because there can be
many possible paths to a destination and many intermediary
devices such as routers along the path. Routing protocols determine the strategies used to transmit data through the network.
TCP can п¬Ѓt into any of the three categoriesвЂ”reliability protocols, connection protocols, or routing protocols.
Checksum
The Checksum value lets the receiver test the integrity of received data. If the
Checksum value is corrupted, the receiver п¬Ѓres back an error message to the sender,
which then immediately retransmits the data.
CompTIAВ® Network+В® (Exam N10-005)
144
Copyright В© Element K Corporation
LESSON 5
Layer 5: The Session Layer
The Session layer establishes connections between devices and applications, maintains the connection, and then terminates or reestablishes it when required. This layer controls how, when,
and for how long a device can transmit or receive data, and speciп¬Ѓes procedures for the connection, termination, and reestablishment of sessions. It also speciп¬Ѓes the procedures for
synchronizing data transfer between two devices with different data transmission rates. Sockets
and session establishment in TCP function at this layer.
Layer 6: The Presentation Layer
The Presentation layer is responsible for encoding data into a standard network-compatible
format. Most programs contain data such as names, identiп¬Ѓcation numbers, and passwords.
These items may be represented as characters, integers, or п¬‚oating numbers, and each device
on a network may use a different code to represent the same data. Moreover, standard data
formats are used to enable devices with different representation techniques to communicate
with each other. This translation is only an intermediary format, and will change at the lower
layers.
The Presentation layer also adds services such as data compression and encryption. Examples
of technologies and protocols that function at this layer include Mesh Made Easy (MME),
Secure Sockets Layer (SSL), Transport Layer Security (TLS), Graphics Interchange Format
(GIF), Joint Photographic Experts Group (JPEG), and Tagged Image File Format (TIFF).
Technologies at the Presentation Layer
The protocols and п¬Ѓle formats that work at the Presentation layer perform different
functions. They include:
вЂў
MME is a protocol used for routing in wireless networks.
вЂў
GIF is a graphic interchange format primarily used on the Internet.
вЂў
JPEG is a compressed graphical п¬Ѓle format that reduces the п¬Ѓle size.
вЂў
TIFF is a digital format used to handle images used in publishing and photography.
Layer 7: The Application Layer
The Application layer provides utilities and services that allow applications to access the network and its resources. This layer deп¬Ѓnes protocols for tasks such as transferring п¬Ѓles, sending
emails, and saving data to a network server. It also advertises itself to the server resources
available in each system for usage on the network. This is the only layer with which the user
directly interacts. Examples of technologies, protocols, and services that function at this layer
include HTTP, Domain Name Service (DNS), File Transfer Protocol (FTP), Gopher, Network
File System (NFS), Network Time Protocol (NTP), Simple Network Management Protocol
(SNMP), Simple Mail Transfer Protocol (SMTP), and Telnet.
Application-, Presentation-, and Session-Layer
Protocols
The Application, Presentation, and Session layers contain several protocol families.
Lesson 5: Networking Models
145
Copyright В© Element K Corporation
LESSON 5
Protocol Family
Functions
Terminal-emulation protocols
Enable computers to act as standard terminals so that they can access
hosts. This usually involves translation of keystrokes and videodisplay codes.
File access and п¬Ѓle transfer protocols
Enable nodes to access п¬Ѓles on the network. Different clients might
use different п¬Ѓle- and path-naming conventions. File access protocols
provide a common means to access network п¬Ѓles.
File transfer protocols enable copying of п¬Ѓles between network storage and other storage, such as a computerвЂ™s local disk drive.
Email protocols
Provide for email delivery and handling of messages.
Remote-action and multiplesession protocols
Determine whether processes should be performed remotely on a client node or directly by a server. RDP is an example of the remoteaction protocol. These protocols are required for setting up a clientserver relationship.
Multiple-session protocols enable multiple network links to be established. TCP is an example of a multiple-session protocol.
Network management protocols
Provide tools for setting up and maintaining the network. As networks interconnect with other networks and become more complex,
more sophisticated network management tools are necessary. SNMP
is an example of a network management protocol.
Task-to-task protocols
Enable software processes to communicate over the network.
Codeset and data structure protocols
Deп¬Ѓne the representation of data. These protocols translate data for
nodes that use different coding schemes.
The OSI Data Communication Process
Data transmission through the OSI reference model involves the following stages:
1. During transmission, data is added to the Application layer of the OSI reference model.
2.
It is then forwarded to the lower layers in the OSI stack until the Physical layer transfers
the data to the network media.
3.
In the data reception process, data is п¬Ѓrst added to the Physical layer of the OSI reference
model.
4.
Data is then forwarded to the layers above it in the OSI stack until it reaches the Application layer. Each layer removes the information it needs before transmitting the remaining
data to the next layer.
CompTIAВ® Network+В® (Exam N10-005)
146
Copyright В© Element K Corporation
LESSON 5
Figure 5-2: Data communication through the OSI reference model.
ACTIVITY 5-1
Identifying the Layers in the OSI Model
Scenario:
In this activity, you will identify the layers in the OSI model.
1.
2.
Match each layer of the OSI model with a description of its function.
Application
a.
Presentation
b.
Session
c.
Transport
d.
Network
e.
Data Link
f.
Physical
g.
Establishes, maintains, and terminates
connections between network devices.
Ensures reliable data transmission by
error detection.
Addresses and delivers packets across
a network.
Moves bits of data on and off the
cabling media.
Translates data so that it can be
moved on the network.
Enables applications to access a network and its resources.
Ensures reliable data transmission by
decreasing the packet size.
At which OSI layer is the MAC address applied to a data packet?
a) Physical
b) Network
c) Transport
d) Data Link
Lesson 5: Networking Models
147
Copyright В© Element K Corporation
LESSON 5
3.
In which layer of the OSI model does Telnet operate?
a) Data Link
b) Physical
c) Application
d) Presentation
e) Session
4.
Which OSI layer is responsible for establishing connections between two devices?
a) Session
b) Presentation
c) Application
d) Physical
e) Data Link
5.
Which layer divides the data received from the Network layer into frames that are
capable of being transmitted by the Physical layer?
a) Presentation
b) Session
c) Transport
d) Data Link
e) Application
TOPIC B
The TCP/IP Model
You have identiп¬Ѓed the layers in the OSI model. Another common networking model is the
TCP/IP model. In this topic, you will identify the layers in the TCP/IP model.
The protocols and services deп¬Ѓned by the TCP/IP model are more suitable for practical use
than those deп¬Ѓned by OSI. To ensure that you are able to utilize the beneп¬Ѓts of the TCP/IP
model in your network, you п¬Ѓrst need to know the protocols and services deп¬Ѓned by TCP/IP
layers.
The TCP/IP Protocols
The Transmission Control Protocol/Internet Protocol (TCP/IP) is a network protocol suite that
is routable and allows computers to communicate across all types of networks. The native protocol of the Internet, TCP/IP is nonproprietary and used for Internet connectivity.
CompTIAВ® Network+В® (Exam N10-005)
148
Copyright В© Element K Corporation
LESSON 5
Figure 5-3: The TCP/IP protocol used in networks.
The TCP/IP protocol suite includes a network/node address structure, tools for static and
dynamic address assignment, name resolution services, and utilities for testing and conп¬Ѓguration.
The TCP/IP Network Model
The TCP/IP model is a four-layer model developed by the United States Department of
Defense. To some extent, it is similar to the OSI model. The TCP/IP model was developed to
allow the addition of new technologies and create a more п¬‚exible architecture which can easily
allow the modiп¬Ѓcation of existing protocols. This architecture later became known as the
TCP/IP model after two of its most important protocols: TCP and IP.
Figure 5-4: The layers in the TCP/IP network model.
Layers in the TCP/IP Network Model
The TCP/IP model deп¬Ѓnes four layersвЂ”the Application layer, the Transport layer, the Internet
layer, and the Network Interface layer, which is also called the Link layer. Each layer in the
TCP/IP model performs a speciп¬Ѓc function.
TCP/IP Layer
Functions
Application
Provides deп¬Ѓnition of protocols for п¬Ѓle, email, and hypertext transfer. It also
handles the encoding of data, controls the sessions, and deп¬Ѓnes socket services
and other utilities over TCP/IP.
Lesson 5: Networking Models
149
Copyright В© Element K Corporation
LESSON 5
TCP/IP Layer
Functions
Transport
Provides connection establishment and communication services. It also deп¬Ѓnes
protocols for end-to-end transfer of data, along with error and п¬‚ow controls. In
the TCP/IP model, there are two transport layer protocols: TCP and UDP.
Internet
Provides addressing and routing services. It also controls congestion on the network. This layer involves transferring data from a source to a destination
network when multiple networks are connected together.
Network Interface
Provides services to send and receive data packets on the network. It deп¬Ѓnes
protocols for moving data frames between adjacent nodes, and for accessing the
medium by the devices. It deп¬Ѓnes the protocols for encoding and transmitting
data over the network media.
Data Terminologies
Each layer uses different terminologies for a unit of information.
Layer
Terminology Used
Application
Data
Transport
Segment
Internet
Datagram or packets
Network Interface
Frames
Comparison of the OSI and TCP/IP Models
In the TCP/IP model, the Application layer maps to the Application, Presentation, and Session
layers of the OSI model. The Transport layer maps to the Transport layer in the OSI model.
The Internet layer maps to the Network layer in the OSI model, and the Network Interface
layer maps to the Data Link and Physical layers in the OSI model.
Similar to the OSI model, each layer of the TCP/IP model deп¬Ѓnes a set of functions and protocols and is designed to provide services to the layer above it. The data communication process
through the TCP/IP layers is similar to the data communication process through the OSI layers.
When data is transmitted on a network, it is added to the Application layer and then forwarded
to the Network Interface layer. Data reception on the TCP/IP layers is the reverse process of
transmission.
CompTIAВ® Network+В® (Exam N10-005)
150
Copyright В© Element K Corporation
LESSON 5
Figure 5-5: The TCP/IP and OSI network models.
There are several similarities and dissimilarities between the OSI and TCP/IP models.
Category
Description
Similarities
вЂў Both models have a similar architecture.
вЂў Both models have an Application, Transport, and Network layer.
вЂў Both models have their lowest layer connected to the physical network.
Dissimilarities
вЂў OSI was developed to standardize networking. However, TCP/IP was speciп¬Ѓcally developed to execute Internet-related tasks such as remote login, email,
and resource sharing.
вЂў The OSI reference model consists of seven architectural layers whereas the
TCP/IP only has four layers. The TCP/IP model does not have a Session or a
Presentation layer.
вЂў The Application layer in TCP/IP handles the responsibilities of Application,
Presentation, and Session layers in the OSI reference model. The TCP/IP
model combines the OSI Data Link and Physical layers into the Network
Interface layer.
вЂў The OSI reference model did not account for different protocols, and therefore
the functionality of each layer is not clearly deп¬Ѓned and optimized. In the
TCP/IP model, the protocols deп¬Ѓne the functionality of each layer for optimal
performance.
Flexibility of the TCP/IP Model
The functions and protocols deп¬Ѓned in the TCP/IP model are more п¬‚exible than those
in the OSI model. It has overshadowed the OSI model in its implementation on
TCP/IP networks. The OSI model is now used to describe the concept of network
models; most networks today, such as the Internet, follow the TCP/IP model.
Lesson 5: Networking Models
151
Copyright В© Element K Corporation
LESSON 5
Data Encapsulation
Encapsulation is the process of adding delivery information to the actual data transmitted on
each layer. Encapsulation takes place in the transmission end as data is passed down the layers.
At the receiving end, the reverse process of removing the added information is done as data
passes to the next higher layer. This process is called de-encapsulation. The added information
is called a header if it is before the data, or a trailer if it is added after the data.
If an application is initiated on the TCP/IP network, data is sent from the Application layer to
the Transport layer. The Transport layer adds a header to the datagram and moves the
datagram to the Internet layer. In the Internet layer, another header is added to the datagram
and passed to the Network Interface layer, which adds a header and a trailer. The entire packet
with the header and trailer information is sent to ensure its proper delivery. Upon receiving the
data, the computer removes the corresponding header and trailer from the data and moves it to
the Application layer.
Protocol Binding
Assigning a protocol to a NIC is referred to as protocol binding. As protocols govern data
transmission, it is critical to bind the protocol to the network interface as it creates a path for
the п¬‚ow of data. Multiple protocols can be bound to a NIC, and the NIC can use any of the
protocols that are bound to it to communicate with other nodes on the network.
Figure 5-6: Protocols bound to a NIC.
Binding Order
In a scenario where a network interface is bound with multiple protocols, it attempts to
connect to a receiving node by sequentially testing the available protocols until it gets
a response from the receiving node using a protocol. This carries an inherent risk that
the protocol that the node responds to might not be the most efficient oneвЂ”it is simply
the п¬Ѓrst compatible protocol in the senderвЂ™s protocol list that the two nodes have in
common.
In Windows, you can specify the binding order in which to bind protocols to a network interface. When you set the binding order to prefer the protocol you most
frequently use on your network, your system does not attempt to use other protocols to
access the network, thus increasing the efficiency of the connection.
CompTIAВ® Network+В® (Exam N10-005)
152
Copyright В© Element K Corporation
LESSON 5
ACTIVITY 5-2
Identifying the Layers of the TCP/IP Network Model
Scenario:
In this activity, you will identify the layers of the TCP/IP network model.
1.
Match the OSI layers with the TCP/IP layers.
Application, Presentation,
Session
Transport
Network
Data Link, Physical
2.
a.
Network Interface
b. Transport
c. Application
d. Internet
Which TCP/IP layer provides addressing and routing services?
a) Application
b) Internet
c) Transport
d) Network Interface
3.
Which layers of the OSI model are included in the Network Interface layer of the
TCP/IP model?
a) Physical
b) Network
c) Data Link
d) Transport
4.
At which TCP/IP layer is information called a datagram or packet?
a) Application
b) Network Interface
c) Internet
d) Transport
5.
Match each layer with its corresponding data terminology.
Application
Transport
Internet
Network Interface
a. Data
b. Frame
c. Segment
d. Datagram
Lesson 5: Networking Models
153
Copyright В© Element K Corporation
LESSON 5
ACTIVITY 5-3
Identifying Protocol Binding on a NIC
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
In this activity, you will verify that the TCP/IP protocol is currently bound to your NIC.
CompTIAВ® Network+В® (Exam N10-005)
154
Copyright В© Element K Corporation
LESSON 5
What You Do
How You Do It
1.
a. Choose Startв†’Control Panel.
Verify that the TCP/IP protocol is
bound to your NIC.
b. In the Control Panel window, click the
Network and Internet link.
c. In the Network and Internet window, click
the Network and Sharing Center link.
d. In the Network and Sharing Center window, in the left pane, click the Change
adapter settings link.
e. In the Network Connections window,
right-click the Local Area Connection
object and choose Properties.
f.
In the Local Area Connection Properties
dialog box, verify that the Internet Protocol Version 4 (TCP/IPv4) check box is
checked and then select the Internet Protocol Version 4 (TCP/IPv4) option.
g. Read the protocol description and then
click OK to close the Local Area Connection Properties dialog box.
h. Close the Network Connections window.
Lesson 5: Networking Models
155
Copyright В© Element K Corporation
LESSON 5
Lesson 5 Follow-up
In this lesson, you identiп¬Ѓed the two main network models that are used in computer
networksвЂ”the OSI model and the TCP/IP model. Your ability to identify the various layers of
the TCP/IP and OSI models will enable you to plan the implementation of a network according
to the devices, protocols, and transmission methods needed for your network.
1.
What are the Physical layer devices that you have come across in your network?
2.
What are the similarities and differences between OSI and TCP/IP models?
CompTIAВ® Network+В® (Exam N10-005)
156
Copyright В© Element K Corporation
LESSON 6
LESSON 6
Lesson Time
2 hour(s), 40 minutes
TCP/IP Addressing and
Data Delivery
In this lesson, you will identify TCP/IP addressing and data delivery methods.
You will:
вЂў
Identify the key protocols in the TCP/IP protocol suite.
вЂў
Identify data addressing on TCP/IP networks.
вЂў
Identify a default IP addressing scheme.
вЂў
Create custom IP addressing schemes.
вЂў
Implement IP version 6.
вЂў
Identify techniques to ensure reliable network data delivery.
Lesson 6: TCP/IP Addressing and Data Delivery
157
Copyright В© Element K Corporation
LESSON 6
Introduction
You are familiar with the TCP/IP model of networking. As a Network+ technician, apart from
the network model, you need to be aware of TCP/IP addressing and data delivery methods to
implement TCP/IP on your network. In this lesson, you will identify the addressing and data
delivery methods of TCP/IP.
As a Network+ technician, you must be able to identify each individual system that is connected, and the addressing scheme and data п¬‚ow on the network. This knowledge will become
necessary to perform fault management and zero in on the faulty node. It will also allow you
to isolate the system from the network, and recognize and troubleshoot the problem while
ensuring that the network is fully functional.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
вЂў
вЂў
Topic A:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.4 Explain the purpose and properties of routing and switching.
вЂ”
1.6 Explain the function of common networking protocols.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.3 Explain the purpose and properties of IP addressing.
вЂ”
1.6 Explain the function of common networking protocols.
Topics C, D, and E:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.3 Explain the purpose and properties of IP addressing.
TOPIC A
The TCP/IP Protocol Suite
In this lesson, you will learn about TCP/IP addressing and data delivery, which is performed
by the TCP/IP protocol suite. TCP/IP consists of a suite of complementary protocols and standards that work together to provide the functionality on TCP/IP networks. In this topic, you
will identify the protocols that are in use on a TCP/IP network.
The TCP/IP protocol suite includes many services that made TCP/IP the universal de facto
standard networking protocol. The TCP/IP protocol suite deп¬Ѓnes how applications on separate
nodes establish a connection and track communications. To ensure that your network is receiving the beneп¬Ѓts that the TCP/IP suite of protocols and standards provide, you need to learn
what those protocols are, and how they can beneп¬Ѓt your network.
CompTIAВ® Network+В® (Exam N10-005)
158
Copyright В© Element K Corporation
LESSON 6
TCP
The TCP/IP protocol suite includes two Transport-layer protocols: Transmission Control Protocol (TCP) and User Datagram Protocol (UDP). TCP is a connection-oriented, guaranteeddelivery protocol used to send data packets between computers over a network such as the
Internet. It is part of the Internet protocol suite along with the Internet Protocol (IP). TCP is
responsible for breaking up data into datagrams, reassembling them at the other end, resending
data lost in transit, and resequencing data. It sends data, waits for an acknowledgement, and
п¬Ѓxes erroneous data.
TCP Analogy
Mr. TCPвЂ™s boss gives him a letter to send to a client. TCP sends it via certiп¬Ѓed mail
with delivery conп¬Ѓrmation and waits by the mailbox. In a few days, he gets a notice in
the mail that the letter is delivered. However, if the notice does not come in a timely
manner, Mr. TCP knows he has to resend the letter.
Connection-Oriented and Connectionless Protocols
Protocols can be divided into two categories depending upon the types of connections
they establish. They are connection-oriented and connectionless protocols. Connectionoriented protocols require a logical connection before transfer of data. Connectionless
protocols, however, do not establish a connection between devices.
Connection-oriented protocols operate in three phases. In the п¬Ѓrst phase, a connection
is established and the devices negotiate the parameters for the connection. During the
second phase, the devices transfer data. And in the third phase, the connection held by
the devices is released and is torn down as it is no longer required.
Connectionless protocols do not have any explicit setup or release phases, and are
always in the data transfer phase. If a device has data to be sent to the other, it just
sends it. Connection-oriented systems can function only in bidirectional communication
environments.
Connectionless communication is achieved when information is transmitted from a
source to a destination without checking to see if the destination is prepared to receive
the information. In environments where it is difficult to transmit data to a destination,
the sender may have to retransmit the information multiple times before the destination
receives the complete message.
IP
Internet Protocol (IP) is a Network-layer protocol that is responsible for routing individual
datagrams and addressing. Responsible for packet formats and the addressing scheme, IP is a
connectionless protocol and acts as an intermediary between higher protocol layers and the
network. It makes no guarantees about packet delivery, corruption of data, or lost packets. IP
usually works in concert with TCP, which establishes a connection between a source and the
destination. TCP/IP not only enables computers to communicate over all types of networks but
also provides network addressing and naming, and data delivery. TCP/IP is the native protocol
of the Internet and is required for Internet connectivity.
The IP Data Packet Delivery Process
IP assigns the correct destination IP address to a data packet. The process of delivering a data
packet by IP consists of three steps:
Lesson 6: TCP/IP Addressing and Data Delivery
159
Copyright В© Element K Corporation
LESSON 6
1.
When a service establishes a connection to the receiving node at the Transport layer, it
resolves the name of the receiving node to that nodeвЂ™s IP address.
2.
The IP address is then passed from the Transport layer to the Internet layer.
3.
IP uses a subnet mask to determine if the receiving node is on the same subnet or a
remote network, and delivers the packet.
Figure 6-1: The process of IP data packet delivery.
UDP
The User Datagram Protocol (UDP), also known as the Universal Datagram Protocol, is a
connectionless Transport-layer protocol in the Internet protocol suite. A connectionless, besteffort delivery protocol, UDP is used with IP like TCP. It transmits data and ensures data
integrity as TCP does. UDP, however, lacks reliability, п¬‚ow-control, and error-recovery functions. It is less complex than TCP, and since it is a connectionless protocol, it provides faster
service.
UDP Analogy
Ms. UDPвЂ™s boss gives her a letter to send, which she sends via regular mail. She does
not wait by the mailbox or give the letter a second thought. She assumes that it
reached its destination. If Ms. UDPвЂ™s letter does not reach its destination, the receiving
party has to call UDPвЂ™s boss and ask for the letter to be resent. Ms. UDP has done her
best job and is out of the picture.
Store and Forward
Because UDP is connectionless, it can send data using the store and forward method.
For example, if a network is congested and data is sent via UDP to a router, the router
may store the data until the next router or hop becomes available. When data reaches a
router, that is considered a hop. So, if data passes through three routers on its way to
its destination, it has made three hops.
ARP
The Address Resolution Protocol (ARP) maps an IP address to a physical or MAC address recognized within a local network. ARP resides on the Data Link layer of the Network Interface
layer, encapsulated by an Ethernet header. Because the MAC address of a network device is 48
bits long and an IP address is only 32 bits, ARPвЂ™s protocol rules help make suitable correlations.
CompTIAВ® Network+В® (Exam N10-005)
160
Copyright В© Element K Corporation
LESSON 6
Address resolution in ARP is performed in the following three steps:
1.
ARP receives an IP address from IP.
2.
If ARP has the MAC address in its cache, it returns it to IP. If not, it issues a broadcast to
resolve the IP address.
3.
A target node with the corresponding IP address responds with a unicast that includes its
MAC address. ARP adds the MAC address into its cache and then sends it to IP as
requested.
ARP supports IP by resolving IP addresses to MAC addresses.
MAC Address Resolution
ARP plays a critical role in address resolution. If IP needs to deliver a packet to an IP
address on the local subnet, it needs to obtain the MAC address of the destination
node directly from ARP. However, if IP needs to deliver a packet to an IP address on a
remote subnet, it needs only the MAC address of the default gateway, and not of the
destination node.
Once IP sends the packet to the default gateway, the default gateway will undertake its
own MAC address resolution process to locate the MAC address of the next hop, and
then forward the packet to other routers and networks as needed. Because the п¬Ѓrst step
in the route to the destination is always on the local network, ARP resolution broadcasts can be conп¬Ѓned to the local subnet.
Reverse Address Resolution Protocol
The Reverse Address Resolution Protocol (RARP) allows a node on a LAN to discover
its IP address from a routerвЂ™s ARP table or cache. With RARP, a network administrator
creates a table on the LANвЂ™s router that maps each nodeвЂ™s MAC address to its corresponding IP address. When a node is added to the network, its IP address is requested
by the RARP client program from the RARP server on the router. The IP address is
returned to the node by the RARP server if the router table has set up that entry, so
that it is stored for future use. RARP is available for Ethernet, FDDI, and Token Ring
LANs.
ICMP
The Internet Control Message Protocol (ICMP) is used with IP that attempts to report on the
condition of a connection between two nodes. ICMP messages notify a sender of network conditions by reporting on errors. If a node is sending data so fast that the receiving nodeвЂ™s
buffers п¬‚ood, the receiving node sends an ICMP source quench message to slow down data
transmission from the sending node.
Lesson 6: TCP/IP Addressing and Data Delivery
161
Copyright В© Element K Corporation
LESSON 6
Figure 6-2: ICMP reports on the condition of a connection between two nodes.
IGMP
The Internet Group Management Protocol (IGMP) is a protocol in the TCP/IP suite that supports multicasting in a routed environment. It is used to inform all systems on a network as to
what host currently belongs to which multicast group. The routers need to support IGMP and
multicast packet routing. Routers use IGMP to periodically send out queries to hosts enquiring
about group membership. IGMP on the node responsible for multicast traffic sends a message
to the router informing it of the multicast session in progress. The router uses IGMP to poll its
interfaces for members of the multicast group, and then forwards the multicast transmission to
group members. Hosts send out notiп¬Ѓcations, called host membership reports, as response to
the query. Upon receiving the response from hosts, routers forward the multicast transmission
to group members.
Figure 6-3: IGMP directs multicast traffic to members of the multicast group.
CompTIAВ® Network+В® (Exam N10-005)
162
Copyright В© Element K Corporation
LESSON 6
ACTIVITY 6-1
Identifying Protocols on a TCP/IP Network
Scenario:
In this activity, you will identify the protocols that are in use on TCP/IP networks.
1.
Which protocol lets systems on the network know which host belongs to which
multicast group?
a) IP
b) TCP
c) ICMP
d) IGMP
2.
Which is a function of ICMP?
a) Controls multicast sessions
b) Controls data transfer speeds
c) Resolves IP addresses to MAC addresses
d) Provides best-effort data delivery
3.
Arrange the following phases of the working of ICMP on an IP network.
Data transmission
ICMP source quench message
Buffer flood
4.
True or False? ARP uses a multicast session to resolve an IP address to a MAC address it
does not have in its cache.
True
False
5.
What are the functions of TCP?
a) Breaking up data
b) Routing data
c) Reassembling data
d) Addressing
e) Resending lost data
Lesson 6: TCP/IP Addressing and Data Delivery
163
Copyright В© Element K Corporation
LESSON 6
TOPIC B
IP Addressing
You are familiar with different protocols and their functions on a TCP/IP network. To ensure
that a network request arrives at its intended destination, you need to ensure that it follows the
correct data addressing scheme. There is an addressing scheme followed on TCP/IP networks.
In this topic, you will identify the methods used for packaging and addressing of data so that it
can be accurately delivered to its intended destination.
Data, while being sent or received on a TCP/IP network, is packaged with the addresses of the
sending and receiving nodes. Packaging data for delivery so that it can be routed to the correct
destination is the cornerstone of networking. Incorrectly packaging or addressing data will
result in usersвЂ™ experiencing symptoms of network communication problems. If you understand
how a client packages data and then addresses it to travel to its destination on your network,
you can use this information to detect causes of network communication problems.
Data Packets
Deп¬Ѓnition:
A data packet is a unit of data transfer between computers that communicate over a
network. In general, all packets contain three parts: a header, data, and a trailer or
footer. The header part contains the destination and source addresses. The footer part
contains an error checking code. The data part contains the actual information or data
that is to be transmitted.
Typically, a sender transmits a data packet and waits for an acknowledgement of its
receipt from a recipientвЂ”an вЂњACKвЂќ signal. If the recipient is busy, the sender waits
until it receives an ACK, after which it transmits the next packet. Throughput can
increase if data is sent as larger packets, with the recipient needing to send fewer
acknowledgements. The contents of a packet depend on the network protocol in use.
Frames, Packets, and Datagrams
The terms frame, packet, and datagram are sometimes used interchangeably when
referring to data being transmitted over a network. With reference to the OSI model,
frames occur at Layer 2 and packets are a feature of Layer 3. A datagram is a selfcontained, independent piece of data with enough information to move from a source
to a destination. The terms вЂњpacketвЂќ and вЂњdatagramвЂќ are used interchangeably in IP
networks, but a packet refers to any message formatted as a packet; datagrams usually
work with an unreliable service, such as UDP, that does not require an
acknowledgement of delivery.
Example:
Figure 6-4: Parts of a data packet.
CompTIAВ® Network+В® (Exam N10-005)
164
Copyright В© Element K Corporation
LESSON 6
Network Addresses
Deп¬Ѓnition:
A network address is a protocol-speciп¬Ѓc identiп¬Ѓer assigned to a node. A network
address typically includes two parts: the п¬Ѓrst part identiп¬Ѓes the network, and the second identiп¬Ѓes a node on the network. A network address can be a number that maps to
the MAC address by software running on nodes. The combination of the network
address and host address is called an IP address.
Example:
Figure 6-5: A network address contains the network and node portions.
Network Names
Deп¬Ѓnition:
A network name is a name assigned to a node to help users and technicians recognize
the device more easily. A naming service, enabled by software running on one or more
nodes, maps a network name to a network address or MAC address.
Example:
Figure 6-6: Network names allow users to recognize the device.
Naming Services
Naming services map network names to network addresses.
Naming Service
Description
Domain Name System
(DNS)
The naming service used on the Internet and many TCP/IP-based
networks. For example, the IP address 209.85.165.99 might map to
www.google.com. In an organizationвЂ™s network, the IP address
128.4.20.100 might map to Server1.
NetBIOS
A simple, broadcast-based naming service. A NetBIOS name can be
any combination of alphanumeric characters excluding spaces and
the following characters: / : * ? вЂќ ; \ | The length of the name cannot exceed 15 characters. The 16th character is reserved.
Lesson 6: TCP/IP Addressing and Data Delivery
165
Copyright В© Element K Corporation
LESSON 6
Naming Service
Description
Windows Internet Naming Service (WINS)
An older type of naming service used on Windows-based networks.
IP Addresses
An IP address is a unique 32-bit binary address assigned to a computer so that it can communicate with other computers and devices on a TCP/IP network. An IP address consists of two
portions: the network address portion common to all hosts and devices on a physical network,
and the host address portion unique to the network host. All devices on a TCP/IP network,
such as computers, routers, and printers, each have a unique IP address. Two types of IP
addresses are available: classful or default IP addresses, and classless or custom IP addresses.
IP addresses belonging to the п¬Ѓrst type are grouped into п¬Ѓve different classes ranging from
Class A to Class E.
Figure 6-7: An IP address enables a computer to connect with other devices.
Depending upon the number of hosts a transmitting terminal addresses, an IP address can be
further classiп¬Ѓed as unicast, multicast, or broadcast. You can easily recognize an IP address by
its dotted decimal notation.
Figure 6-8: Decimal notation of an IP address.
The technique of assigning IP addresses is called IP addressing.
IPv4 Addresses
A 32-bit binary IPv4 address is usually separated by dots into four 8-bit octets for
readability, and each octet is converted to a single decimal value. Each decimal number can range from 0 to 255, but the п¬Ѓrst number cannot be 0. In addition, all four
numbers cannot be 0 (0.0.0.0) or 255 (255.255.255.255).
CompTIAВ® Network+В® (Exam N10-005)
166
Copyright В© Element K Corporation
LESSON 6
For more information on IP address assignments, see www.iana.org/assignments/
ipv4-address-space/.
The Dotted Decimal Notation
TCP/IP addresses are usually displayed in the dotted decimal notation rather than in
binary. The dotted decimal notation consists of four decimal numbers separated by
three dots. Each decimal number is called an octet and represents eight binary bits.
When pronouncing a dotted decimal number, include the separator dots. For example,
the IP address 208.123.45.18 is pronounced вЂњtwo oh eight dot one twenty-three dot
forty-п¬Ѓve dot eighteen.вЂќ
ARIN
The Regional Internet Registry (RIR) is an organization that supervises how Internet
numbers are allocated and registered in a particular geographical region. There are п¬Ѓve
RIRs in operation now and the American Registry for Internet Numbers (ARIN) is
responsible for the United States, Canada, and parts of the Caribbean.
The services provided by ARIN include:
вЂў
IP address allocation.
вЂў
Registration transaction information with the help of WHOIS, a query/response
protocol that is used to query an official database to determine the owner of a
domain name, or an IP address on the Internet.
вЂў
Routing information with the help of RIRs that manage, distribute, and register
public Internet number resources within their respective regions.
Mailing Address Analogy
Some of the numbers in an IP address identify the network segment on which a computer resides, just as a personвЂ™s mailing address uses a street name to identify the
street on which he or she lives. The rest of the numbers in the IP address uniquely
identify the computer on a network, just as the house number portion of the mailing
address uniquely identiп¬Ѓes a speciп¬Ѓc house on a street.
Subnets
Deп¬Ѓnition:
Subnetting is the process of logically dividing a network into smaller subnetworks or
subnets, with each subnet having a unique address. The conventional addressing technique has IP addresses with two hierarchical levels, namely the network ID and host
ID. However, in subnet addressing, the host portion is further subdivided into the
subnet ID and host ID. Therefore, subnet addressing is designed with three hierarchical
levels: a network ID, subnet ID, and host ID.
To create subnets, a network administrator conп¬Ѓgures each node with an IP address
and a subnet mask, which is used to identify the subnet to which the node belongs in
order to divide the network into subnetworks. Routers and switches act as border
devices for each subnet and manage traffic within and between subnets on a network.
The subnet can be on a separate physical segment, or it can share segments with other
logical subnets.
Lesson 6: TCP/IP Addressing and Data Delivery
167
Copyright В© Element K Corporation
LESSON 6
Analogy:
The three address parts of a subnet address can be compared to a telephone number,
which consists of an area code, an exchange number, and the customer code.
Example:
Figure 6-9: A network divided into two subnets.
Beneп¬Ѓts of Subnets
Two main beneп¬Ѓts of creating subnets are to improve network performance and to provide a more secure network environment. For performance enhancement, an
administrator would most likely divide the network into groups of devices that frequently interact with each other, and for security enhancement, the administrator might
divide the network based on servers that have restricted applications or sensitive data.
Subnet Masks
A subnet mask is a 32-bit number assigned to each host for dividing the 32-bit binary IP
address into network and node portions. This segregation makes TCP/IP routable. A subnet
mask uses the binary AND operation to remove the node ID from the IP address, leaving just
the network portion. Default subnet masks use the value of eight 1s in binary, or 255 in decimal, to mask an entire octet of the IP address.
Figure 6-10: The subnet mask of an IP address.
Subnet Mask Values
The п¬Ѓrst number of a subnet mask must be 255; the remaining three numbers can be
any of the following values: 255, 254, 252, 248, 240, 224, 192, 128, and 0.
CompTIAВ® Network+В® (Exam N10-005)
168
Copyright В© Element K Corporation
LESSON 6
Default Subnet Masks
Groups of IP addresses have speciп¬Ѓc default subnet masks, based on the range of values of the п¬Ѓrst octet of the IP address.
Default Subnet Mask
Value of the First Octet of IP Address
255.0.0.0
1вЂ“126
255.255.0.0
128вЂ“191
255.255.255.0
192вЂ“223
ACTIVITY 6-2
Identifying TCP/IP Information
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
As the network administrator, you need to identify the IPv4 and MAC addresses of few computers to create a subnet. You also need to identify the names of a few computers so that you
can join them to the domain on your network. You need to reassign the computers to a different subnet on your organizationвЂ™s network and you have been asked to gather information such
as the subnet mask and default gateway. You need to check this TCP/IP information on each
computer.
What You Do
How You Do It
1.
a. Choose Startв†’Control Panel.
Display system properties.
b. In the Control Panel window, click the
System and Security link.
c. In the System and Security window, click
the System link to display the system
properties.
Your computerвЂ™s full name might differ from
the name displayed in the graphic.
Lesson 6: TCP/IP Addressing and Data Delivery
169
Copyright В© Element K Corporation
LESSON 6
d. In the System window, in the Computer
name, domain, and workgroup settings
section, in the Full computer name field,
identify your computerвЂ™s full name.
e. Close the System window.
CompTIAВ® Network+В® (Exam N10-005)
170
Copyright В© Element K Corporation
LESSON 6
2.
View the TCP/IP information assigned
to your NIC.
a. Choose Startв†’Control Panel.
b. In the Control Panel window, click the
Network and Internet link.
c. In the Network and Internet window, click
the Network and Sharing Center link.
d. In the Network and Sharing Center window, click the Change adapter settings
link.
e. Right-click Local Area Connection and
choose Status.
f.
In the Local Area Connection Status dialog box, click Details.
g. In the Network Connection Details dialog
box, in the properties list, identify the
physical address, IPv4 address, subnet
mask, DHCP server, and DNS server information.
h. Close all open dialog boxes and windows.
Subnet Mask Structure
To conform to TCP/IP standards, subnet masks must follow a set of rules:
вЂў
The ones in the mask always start at bit 32, to the left of the mask.
вЂў
The zeros in the mask always start at bit 1, to the right of the mask.
вЂў
The ones in the mask must be contiguous, with no zeros interspersed between the ones.
Lesson 6: TCP/IP Addressing and Data Delivery
171
Copyright В© Element K Corporation
LESSON 6
Figure 6-11: Structure of a subnet mask.
IP Address Assignment Rules
While assigning IP addresses to nodes in a network, certain rules are to be followed:
вЂў
Each node that connects to the network must have a unique IP address.
вЂў
If the network has subnets, each node connected must be assigned to a subnet on the network.
вЂў
Each subnet must have a unique network ID.
вЂў
All devices on a subnet must share the same network ID.
вЂў
Nodes on a local subnet must have unique node IDs.
вЂў
Nodes on different subnets can have the same node IDs if the network IDs are different.
вЂў
The node address cannot be all ones or all zeros.
вЂў
The IP address 127.0.0.1 is reserved for testing and cannot be used as a node ID.
Figure 6-12: IP addressing on subnets.
Binary and Decimal Conversion
Binary is a base 2 numbering system in which any bit in the number is either a zero or a one.
Each bit has a weight, or place value, which is a power of two. The place value is determined
by the bitвЂ™s location in the binary number. The value of a binary number is the sum of the
place values of all one bits in a number.
CompTIAВ® Network+В® (Exam N10-005)
172
Copyright В© Element K Corporation
LESSON 6
Figure 6-13: Binary and decimal equivalents.
Binary Exponents
For a given value of n ranging from zero to two, the decimal values of 2n vary accordingly.
Exponent Value
Decimal Value
0
1
2
1
2
2
2
4
2
3
8
2
4
16
2
5
32
2
6
64
2
7
128
2
Binary to Decimal Equivalents
8-bit binary numbers can be converted to their decimal equivalents using powers of
two.
Binary Number
00000001
00000011
00000111
00001111
00011111
00111111
01111111
11111111
Conversion
Decimal Value
0
0+0+0+0+0+0+0+2
1
1
0
0+0+0+0+0+0+2 +2
2
1
3
0
0+0+0+0+0+2 +2 +2
3
2
1
7
0
0+0+0+0+2 +2 +2 +2
4
3
2
1
15
0
0+0+0+2 +2 +2 +2 +2
5
4
3
2
1
31
0
0+0+2 +2 +2 +2 +2 +2
6
5
4
3
2
1
63
0
0+2 +2 +2 +2 +2 +2 +2
7
6
5
4
3
2
1
127
0
2 +2 +2 +2 +2 +2 +2 +2
Lesson 6: TCP/IP Addressing and Data Delivery
255
173
Copyright В© Element K Corporation
LESSON 6
Windows Calculator
The Calculator accessory that is built in to Windows operating systems can be very
useful when converting decimal and binary numbers. Switch the calculator to the Scientiп¬Ѓc view, type a number, and use the Dec and Bin radio buttons to convert the
number from one format to another.
Binary ANDing
To apply a subnet mask, both the IP address and subnet mask are converted to binary. The two
binary numbers are ANDed together. The zeros in the subnet mask convert all bits in the node
portion of the IP address to zeros, leaving the network portion of the address intact. The binary
AND operation involves two rules:
вЂў
Zero AND any value equals zero.
вЂў
One AND one equals one.
Figure 6-14: Applying a subnet mask.
Custom Subnetting
Because the binary value of 255 is all ones (11111111), you can easily identify the network portion of an IP address with any of the three default subnet masks applied
without converting to binary. However, you can subdivide your IP network address by
borrowing a part of your networkвЂ™s host addresses to identify subnet addresses. In
these cases, the network portion of the IP address is not so easily identiп¬Ѓed, and it may
be necessary to convert to binary to determine the network and node portions of the IP
address.
CompTIAВ® Network+В® (Exam N10-005)
174
Copyright В© Element K Corporation
LESSON 6
ACTIVITY 6-3
Identifying IP Addressing
Scenario:
In this activity, you will identify IP addressing concepts.
1.
Match a component of a data packet with its contents.
Header
Data
Footer
2.
a. An error checking code.
b. Destination and source addresses.
c. Data to be transmitted.
Select the example of an IP address.
a) webserver1
b) 201.183.100.2
c) 00-08-02-D4-F6-4C
d) M123-X7-FG-128
3.
Match the binary value with its decimal equivalent.
01100100
11100000
11111111.11111111.
11110000.00000000
01100100.01100100.
00000010.00000001
01111111.00000000.
00000000.00000001
4.
a. 100.100.2.1
b. 100
c. 127.0.0.1
d.
224
e.
255.255.240.0
Which is the default subnet mask value for the addresses whose first octet ranges from
192 to 223?
a) 255.255.0.0
b) 255.255.255.0
c) 255.0.0.0
d) 254.255.0.0
5.
True or False? Default subnet masks use the value of eight 0s in binary.
True
False
Lesson 6: TCP/IP Addressing and Data Delivery
175
Copyright В© Element K Corporation
LESSON 6
TOPIC C
Default IP Addressing Schemes
In the previous topic, you identiп¬Ѓed the addressing schemes for the protocols and standards
that can be used on a TCP/IP network. Now that you are aware of the protocols, you can identify the ways by which IP addresses are assigned. In this topic, you will identify the default
addressing schemes used in TCP/IP networks.
On the Internet, TCP/IP addresses must be regulated with a common scheme to ensure that
there are no duplicate addresses worldwide. Companies and Internet Service Providers (ISPs)
often lease addresses for their networks and customers to gain Internet access as it is expensive
for a company to lease IP addresses for every client that needs Internet access. To lease the
required IP addresses easily, you need to п¬Ѓrst understand the default IP address classes, their
reserved purposes, and where to lease the IP addresses you need.
ICANN
The IP address of every node on the Internet must be unique. An international organization
called the Internet Corporation for Assigned Names and Numbers (ICANN) controls the leasing
and distribution of IP addresses on the Internet. Companies lease their IP addresses from
ICANN to ensure that there are no duplicate IP addresses.
In 1993, an international organization called the Internet Assigned Number Authority (IANA) was established to
govern the use of Internet IP addresses. Today, that function is performed by ICANN.
Figure 6-15: ICANN leases IP addresses on the Internet.
IP Address Classes
The TCP/IP suite consists of п¬Ѓve blocks of addresses, called address classes, for use on speciп¬Ѓc networks based on their size.
CompTIAВ® Network+В® (Exam N10-005)
176
Copyright В© Element K Corporation
LESSON 6
Address Class
Description
Class A
Class A addresses provide a small number of network addresses for networks with a large number of nodes per network. Used only by extremely
large networks, Class A addresses are too extensive for use by most
organizations.
вЂў Address range:1.0.0.0 to 127.255.255.255
вЂў Number of networks:126 (The IP address 127.0.0.1 is reserved.)
вЂў
вЂў
вЂў
вЂў
Number of nodes per network:16,777,214
Network ID portion:First octet
Node ID portion:Last three octets
Default subnet mask:255.0.0.0
Example of a Class A address: 10.28.220.19
Class B
Class B addresses provide a balance between the number of network
addresses and the number of nodes per network. Most organizations lease
Class B addresses for use on networks that connect to the Internet.
вЂў Address range:128.0.0.0 to 191.255.255.255
вЂў Number of networks:16,382
вЂў Number of nodes per network:65,534
вЂў Network ID portion:First two octets, excluding Class A addresses
вЂў Node ID portion:Last two octets
вЂў Default subnet mask:255.255.0.0
Example of a Class B address: 155.128.20.106
Class C
Class C addresses provide a large number of network addresses for networks with a small number of nodes per network.
вЂў Address range:192.0.0.0 to 223.255.255.255
вЂў Number of networks:2,097,150
вЂў Number of nodes per network:254
вЂў Network ID portion:First three octets, excluding Class A and Class B
addresses
вЂў Node ID portion:Last octet
вЂў Default subnet mask:255.255.255.0
Example of a Class C address: 201.208.120.86
Class D
Class D addresses are set aside to support multicast transmissions. Any network can use them, regardless of the base network ID. A multicast server
assigns a single Class D address to all members of a multicast session.
There is no subnet mask. Class D addresses are routable only with special
support from routers.
Address range:224.0.0.0 to 239.255.255.255
Example of a Class D address: 230.43.160.48
Class E
Class E addresses are set aside for research and experimentation.
Address range:240.0.0.0 to 255.255.255.255
Example of a Class E address: 250.217.39.190
Lesson 6: TCP/IP Addressing and Data Delivery
177
Copyright В© Element K Corporation
LESSON 6
Special Addresses in Default Address Classes
Because neither the node portion nor the network portion of an IP address can be all
1s or all 0s, certain host addresses in each address class are invalid for individual
hosts. For example, in Class A only, the host address 10.0.0.0 is not valid because the
host portion is all 0sвЂ”the address is identical to the network address. Similarly, the
Class A address 120.255.255.255 is not valid because the host portion is all 1s. A host
address with all 1s has a special purpose; it is used as a broadcast address. The address
127.255.255.255 would be used for broadcasts to the local subnet.
Available Host and Network Addresses
The number of host addresses or network addresses available on networks in each
class depends upon how many bits are in the network portion or host portion of the
address. The formula to calculate available host addresses is 2x-2, where x is the number of host bits. Two addresses in each block are unavailable because host addresses
cannot be all ones or all zeros.
Similarly, the formula to calculate available network addresses is 2y-2, where y is the
number of network bits.
Restricted IP Addresses
Some IP addresses have special uses and cannot be assigned to networks and hosts.
For example, IP address 127.0.0.1 is reserved for testing. It identiп¬Ѓes your network and
host on the Internet.
Restriction
Reason
Example
A network address of 0 is
not permitted.
When the network address is set to 0, The 0.0.0.22 address
identiп¬Ѓes host 22 on
TCP/IP interprets the IP address as a
вЂњlocalвЂќ address, meaning that the data the local network.
packet does not need to be transmitted
through a router.
A node address of 0 is not
permitted.
When the node address is set to 0,
TCP/IP interprets the address as a
network address and not a node
address.
The address 122.0.0.0
identiп¬Ѓes the network
whose address is 122.
The network address of 127
is reserved.
Messages addressed to a network
address of 127 are not transmitted out
onto the network; instead, these messages are sent back to the transmitting
node. The address of 127 is used to
test the conп¬Ѓguration of TCP/IP.
127.0.0.1 is referred to
as the loopback
address. It is a shorthand way for any host
to refer to itself.
Neither the network address
nor the host address can be
just 255.
The 255 address is reserved for
broadcasts.
255.255.255.255 is a
broadcast address. Data
packets will be sent to
all hosts on all networks. 187.205.255.255
is also a broadcast
address and data packets will be sent to all
hosts on network
187.205.
CompTIAВ® Network+В® (Exam N10-005)
178
Copyright В© Element K Corporation
LESSON 6
Restriction
Reason
Example
Network address 1.1.1.1 is
not permitted.
TCP/IP identiп¬Ѓes all hosts with that
address.
1.1.1.1 refers to every
host.
To test your node, enter ping 127.0.0.1, ping loopback, or ping localhost to check
if TCP/IP is functioning on your node.
Private IP Addresses
Private IP addresses are addresses that organizations use for nodes within enterprise networks
requiring IP connectivity and not external connections to the Internet. IP addresses in each of
the Classes A, B, and C are reserved as private IP addresses. When an Internet router receives
a data packet bound for one of these reserved IP addresses, it recognizes the address as
nonroutable and does not forward it outside the network. Private IP addresses can be used
freely on internal networks. Because they are not routable, private IP addresses do not cause
duplicate IP address conп¬‚icts on the Internet.
An organization can use private IP addresses without contacting an Internet registry or the
ICANN. These addresses are not injected into the global Internet routing system. Therefore,
different organizations can use the address space simultaneously. Problems arising due to the
shortage of IP addresses are partly resolved by private IP addresses.
In order for a computer with an assigned nonroutable IP address to access Internet resources or other external
networks, the private IP address needs to be converted to a routable address. This is usually accomplished
through a gateway or by a router.
Private IP Address Ranges
The private, nonroutable IP address ranges are:
вЂў
10.0.0.0 to 10.255.255.255
вЂў
172.16.0.0 to 172.31.255.255
вЂў
192.168.0.0 to 192.168.255.255
The Local and Remote Addressing Process
In the local and remote addressing process:
1. A network node uses a subnet mask to determine whether a data packet is bound for the
local subnet or must be routed to a remote subnet.
2.
The node applies the subnet mask to its own IP address to determine its own network ID.
3.
It then applies the subnet mask to the packetвЂ™s destination address to determine the destination network ID.
4.
Once the node has applied the subnet mask, it compares the two network IDs.
5.
If they are the same, then the two nodes are on the same subnet and the node can deliver
the packet.
6.
If the two networks are different, then the two nodes are remote to each other and the
data is routed to the remote network.
Lesson 6: TCP/IP Addressing and Data Delivery
179
Copyright В© Element K Corporation
LESSON 6
The process of determining local and remote addresses based on IP addresses falls under the Network layerвЂ™s
routing protocol function.
Figure 6-16: Steps involved in local and remote addressing process.
Default Gateways
Deп¬Ѓnition:
A default gateway is the IP address of a router that routes remote traffic from the computerвЂ™s local subnet to remote subnets. Typically, it is the address of the router
connected to the Internet. A TCP/IP host does not need a default gateway address if
the computer does not need to communicate with computers outside its local subnet.
You need to conп¬Ѓgure a node with an IP address, a subnet mask, and a default gateway to communicate on the Internet. You will need only an IP address and a subnet
mask to communicate with other nodes on your network.
You can enter ipconfig on your command prompt to view the TCP/IP parameters on your computer.
CompTIAВ® Network+В® (Exam N10-005)
180
Copyright В© Element K Corporation
LESSON 6
Example:
Figure 6-17: The default gateway routes traffic to remote subnets.
ACTIVITY 6-4
Identifying Default IP Addressing Schemes
Scenario:
In this activity, you will identify the characteristics of default IP addressing schemes.
1.
Match the IP address range with its class.
Class A
Class B
Class C
Class D
Class E
2.
a. 1.0.0.0 to 127.255.255.255
b. 128.0.0.0 to 191.255.255.255
c. 224.0.0.0 to 239.255.255.255
d. 192.0.0.0 to 223.255.255.255
e. 240.0.0.0 to 255.255.255.255
Select the IP address classes that can be assigned to hosts.
a) Class A
b) Class B
c) Class C
d) Class D
e) Class E
3.
What is the term used to denote the IP address of a router that routes remote traffic
from the computerвЂ™s local subnet to remote subnets?
a) Subnet mask
b) Default gateway
c) Private IP address
d) Loopback address
Lesson 6: TCP/IP Addressing and Data Delivery
181
Copyright В© Element K Corporation
LESSON 6
4.
True or False? A TCP/IP host needs a default gateway address to communicate with
computers within its local subnet.
True
False
TOPIC D
Create Custom IP Addressing
Schemes
In the previous topic, you identiп¬Ѓed the various IP addressing schemes. Administrators can also
create customized IP address schemes. In this topic, you will learn how to construct custom IP
addressing schemes.
Because of the п¬Ѓxed number of default networks and hosts on Class B and Class C networks,
many companies were forced to either lease Class B networks and then divide them up into
multiple subnetworks within their company, or combine multiple smaller subnets into one
highly subnetted network using Class C networks to facilitate the total number of nodes. As a
network administrator, you will need to know how to create subnets that meet the requirements
of the current IP addressing scheme and are fully functional on any IP network.
Custom TCP/IP Subnets
Deп¬Ѓnition:
A custom TCP/IP subnet is a class of leased addresses that are divided into smaller
groups to serve a networkвЂ™s needs. A custom TCP/IP subnet has a custom subnet mask
ANDed to the IP address, so that what the node sees as its local network is a subset of
the whole default network address block. A default gateway is conп¬Ѓgured for each
subnet to route traffic between subnets.
CompTIAВ® Network+В® (Exam N10-005)
182
Copyright В© Element K Corporation
LESSON 6
Example:
Figure 6-18: A custom subnet mask ANDed to the IP address.
Custom Subnet Masks
You can use a custom subnet mask to divide a single IP address block into multiple subnets. A
custom subnet mask borrows node bits in a contiguous block from the left side of the node
portion of the address, and uses them as network bits. This divides a single network address
into multiple networks, each containing fewer nodes.
Figure 6-19: A custom subnet mask borrows node bits in a contiguous block.
Custom Subnet Masks on Class C Networks
There are different possible combinations of custom subnet masks on a Class C network.
Last Octet of New
Mask (Binary)
New Mask (Decimal)
Number of Added
Networks
Nodes per Network
10000000
255.255.255.128
2
126
11000000
255.255.255.192
4
62
11100000
255.255.255.224
8
30
11110000
255.255.255.240
16
14
11111000
255.255.255.248
32
6
11111100
255.255.255.252
64
2
Lesson 6: TCP/IP Addressing and Data Delivery
183
Copyright В© Element K Corporation
LESSON 6
Last Octet of New
Mask (Binary)
New Mask (Decimal)
Number of Added
Networks
11111110
255.255.255.254
Not allowed in Class C
11111111
255.255.255.255
Not allowed in Class C
Nodes per Network
Determining Available Host Addresses
The number of host addresses on a custom subnet is a function of the total number of
address bits available for host addressing. The formula is 2x-2, where x is the number
of host bits. Two addresses in each block are unavailable because host addresses cannot be all ones or all zeros.
So, with a subnet mask of 255.255.255.248 (11111111.11111111.11111111.11111000 in
binary), three bits available for host addresses (23=8), less two unavailable addresses
leaves a total of six available host addresses per network.
Variable Length Subnet Masks
Deп¬Ѓnition:
A Variable Length Subnet Mask (VLSM) can be used for creating subnets that have
different numbers of nodes. In a standard subnet, the number of addresses is identical
within each subnet. The custom subnet mask must accommodate the subnet with the
greatest number of nodes. However, such a scheme can waste addresses on smaller
subnets. A VLSM applies the custom subnet mask, which provides the number of
nodes required for each subnet.
The downside of carefully tailoring a subnet mask to each subnet is that you limit your capacity for
future node growth on each subnet. Ideally, you want some room for future growth, but predicting how
much growth you need is more of an art than an exact science.
Example: Variable Subnet Masks on a Network
A Class C network might contain 3 subnets, with 5 hosts on subnet 1, 12 hosts on
subnet 2, and 28 hosts on subnet 3. You could use a custom subnet mask of
255.255.255.224 to allow each subnet to have 30 addresses. However, applying this
subnet mask would waste 25 IP addresses on subnet 1, 18 IP addresses on subnet 2,
and 2 IP addresses on subnet 3. By applying a variable subnet mask of
255.255.255.248 to subnet 1, 255.255.255.240 to subnet 2, and 255.255.255.224 to
subnet 3, you only waste one IP address on subnet 1, and two IP addresses each on
subnets 2 and 3.
CompTIAВ® Network+В® (Exam N10-005)
184
Copyright В© Element K Corporation
LESSON 6
Figure 6-20: VLSM creates subnets containing different numbers of nodes.
Classless Inter Domain Routing
Classless Inter Domain Routing (CIDR) is a classless addressing method that considers a
VLSM as a 32-bit binary word. Mask bits can move in one-bit increments to provide the exact
number of nodes and networks required. The CIDR notation combines a network address with
a number to represent the number of one bits in the mask. With CIDR, multiple class-based
networks can be represented as a single block.
Figure 6-21: A classless addressing method that considers a VLSM as a 32-bit binary
word.
CIDR can also be referred to as classless routing or supernetting. Because of its efп¬Ѓciencies, CIDR has been rapidly adopted, and the Internet today is largely a classless address space.
CIDR Subnet Masks
There are different values possible for each CIDR subnet mask. The /24, /16, and /8
CIDR masks correspond with the classful ranges of Class C, Class B, and Class A,
respectively.
CIDR Mask (Number of
Network Bits)
Number of Possible
Nodes
Standard Subnet Mask in Dotted
Decimal
/32
N/A
255.255.255.255
/31
N/A
255.255.255.254
/30
2
255.255.255.252
Lesson 6: TCP/IP Addressing and Data Delivery
185
Copyright В© Element K Corporation
LESSON 6
CIDR Mask (Number of
Network Bits)
Number of Possible
Nodes
Standard Subnet Mask in Dotted
Decimal
/29
6
255.255.255.248
/28
14
255.255.255.240
/27
30
255.255.255.224
/26
62
255.255.255.192
/25
126
255.255.255.128
/24
254
255.255.255.0
/23
510
255.255.254.0
/22
1,022
255.255.252.0
/21
2,046
255.255.248.0
/20
4,094
255.255.240.0
/19
8,190
255.255.224.0
/18
16,382
255.255.192.0
/17
32,766
255.255.128.0
/16
65,534
255.255.0.0
/15
131,070
255.254.0.0
/14
262,142
255.252.0.0
/13
524,286
255.248.0.0
/12
1,048,574
255.240.0.0
/11
2,097,150
255.224.0.0
/10
4,194,304
255.192.0.0
/9
8,386,606
255.128.0.0
/8
16,777,214
255.0.0.0
/7
33,554,430
254.0.0.0
/6
67,108,862
252.0.0.0
/5
134,217,726
248.0.0.0
/4
268,435,544
240.0.0.0
/3
536,870,910
224.0.0.0
/2
1,073,741,824
192.0.0.0
/1
N/A
N/A
A CIDR Application
The CIDR address 192.168.12.0/23 applies the network mask 255.255.254.0 to the
192.168.0.0 network, starting at 192.168.12.0. On a VLSM-enabled router, this single
routing entry can deп¬Ѓne a supernet that includes the address range from 192.168.12.0
to 192.168.13.255. Compare this to traditional class-based networking, where this
range of addresses would require separate routing entries for each of two Class C
networksвЂ”192.168.12.0 and 192.168.13.0вЂ”each using the default Class C subnet
mask of 255.255.255.0.
CompTIAВ® Network+В® (Exam N10-005)
186
Copyright В© Element K Corporation
LESSON 6
How to Create Custom IP Addressing Schemes
Procedure Reference: Calculate the Base Network ID of a Custom Subnet
To calculate the base network ID of a custom subnet:
1.
Isolate the octet that has shared network and node bits. This is the only octet you
need to focus on. The other octets will be either all network bits or all node bits.
2.
Convert the shared octet for the IP address to binary.
3.
Apply the mask from the shared octet of the subnet mask to the shared octet of
the IP address to remove the node bits.
4.
Convert the shared portion of the IP address back to decimal.
Example: Calculate a Network ID
To determine the network ID of the IP address 206.234.120.87/20:
1.
Isolate the octet that has shared network and node bits.
The subnet mask for /20 is 11111111 11111111 11110000 00000000
The third octet is shared between nodes and networks.
2.
Convert the shared octet for the IP address to binary; add leading zeros as needed
to create an 8-bit number.
The third octet is 120; the binary equivalent is 1111000. Add a leading zero to
create an 8-bit number.
206.234.01111000.87
3.
Apply the mask from the shared octet of the subnet mask to the shared octet of
the IP address to remove the node bits.
Because the fourth octet involves node bits, all of it will change to zeros. The п¬Ѓrst
and second octets are totally network bits and will drop through the mask.
206.234.01111000.87
255.255.11110000.0
____________________
206.234.01110000.0
4.
Convert the shared portion of the IP address back to decimal.
01110000 = 112
The base network ID is 206.234.112.0.
Lesson 6: TCP/IP Addressing and Data Delivery
187
Copyright В© Element K Corporation
LESSON 6
DISCOVERY ACTIVITY 6-5
Creating Custom IP Addressing Schemes
Scenario:
You have been asked to implement TCP/IP on a divided network. There are three subnets
separated by two Layer 3 network devices and no Internet connection. Subnet 1 has 120 nodes,
Subnet 2 has 1,350 nodes, and Subnet 3 has 240 nodes. You need to create a custom addressing scheme by selecting the appropriate network IDs.
1.
How many individual network IDs do you need?
a) One
b) Two
c) Three
d) Four
2.
If you were going to use default subnet masks for the networks, which default subnet
would be applied to each network?
3.
Which is a valid example of an appropriate IP address and subnet mask for subnet 1?
a) IP address: 192.168.10.0; subnet mask: 255.255.255.0
b) IP address: 172.16.0.0; subnet mask: 255.255.0.0
c) IP address: 192.168.10.0; subnet mask: 255.255.0.0
d) IP address: 172.16.0.0; subnet mask: 255.255.255.0
CompTIAВ® Network+В® (Exam N10-005)
188
Copyright В© Element K Corporation
LESSON 6
TOPIC E
Implement IPv6 Addresses
In the previous topics, you learned about IPv4, which is the original version of the TCP/IP
protocol and is in use on thousands of networks. In contrast, IP version 6 (IPv6) is a new standard that is currently being implemented on networks and is expected to replace IPv4 very
shortly. In this topic, you will implement IPv6 addresses.
As a network professional who supports TCP/IP networking, you will be aware of the limitations of the IPv4 addressing scheme. IPv6 is an addressing scheme available to network
administrators who need to overcome these limitations. If you support or conп¬Ѓgure networks
that include this new IP addressing scheme, you will need to understand its characteristics as
well as how it can interoperate with existing IPv4 implementations.
IPv4 Address Space Limitations
Limitations of the IPv4 address space include:
вЂў
The 32-bit IP address space itself, which provides only a theoretical maximum of 232, or
approximately 4,295 billion, separate addresses.
вЂў
The division of the address space into п¬Ѓxed classes, with the result that node addresses
falling either between classes or between subnets are unavailable for assignment.
вЂў
The fact that IP address classes provide a small number of node addresses, leading to difп¬Ѓculty matching IP address leases to a companyвЂ™s needs and IP addresses being wasted.
вЂў
The depletion of Class A and Class B IP address assignments.
вЂў
Unassigned and unused address ranges within existing Class A and Class B blocks.
IPv6
IP version 6, or IPv6, the successor to IPv4, is an addressing scheme that increases the available pool of IP addresses by implementing a 128-bit binary address space. IPv6 also includes
new features, such as simpliп¬Ѓed address headers, hierarchical addressing, support for timesensitive network traffic, and a new structure for unicast addressing.
IPv6 is not compatible with IPv4, so at present it is narrowly deployed on a limited number of
test and production networks. Full adoption of the IPv6 standard will require a general conversion of IP routers to support interoperability.
For more information on IPv6, see the IETFвЂ™s IP Version 6 Working Group charter at www.ietf.org/html.charters/
ipv6-charter.html.
Simpliп¬Ѓed Headers
One of the goals of IPv6 is to keep the IP headers as small as possible, to make access
to the address more efficient and quicker. Non-essential information in IPv6 headers is
moved to optional extension headers.
Lesson 6: TCP/IP Addressing and Data Delivery
189
Copyright В© Element K Corporation
LESSON 6
Hierarchical Addressing
In IPv6, address blocks are automatically assigned hierarchically by routers. Top-level
routers have top-level address blocks, which are automatically divided and assigned as
routers, and segments are added to them. This divides the address space logically
instead of randomly, making it easier to manage.
Time-Sensitive Data Support
A new п¬Ѓeld in the IP header of IPv6 packets enables IP to guarantee the allocation of
network resources when requested by time-dependent services such as voice and video
transmission.
Unicast Address Structure
IPv6 replaces classful addresses with a more п¬‚exible and logical unicast addressing
structure. There are different categories of unicast addresses that serve different functions. Each network interface on a typical IPv6 host will be logically multihomed,
which means that it will have more than one type of unicast address assigned.
Unicast Address Type
Description
Global addresses
Globally routable public addresses. Also known as aggregatable global unicast addresses, they are designed in such that they can be
summarized for efficient routing. Global addresses are the equivalent
of the entire IPv4 public address space.
Site-local addresses
Addresses used for internal networks that are not routable on the
Internet. The equivalent of the IPv4 private, nonroutable address
blocks.
Link-local addresses
Addresses that are used to communicate and automatically assigned
on private network segments with no router. The equivalent of
APIPA addressing in IPv4.
IPv6 transitional
addresses
Addresses are used on mixed networks to support routing of IPv6
data across IPv4 networks. This class will be phased out when all
routers convert to IPv6.
IPv6 Addresses
An IPv6 address is a 128-bit binary number assigned to a computer on a TCP/IP network.
Some of the bits in the address represent the network segment; the other bits represent the host
itself. For readability, the 128-bit binary IPv6 address is usually separated by colons into eight
groups of four hexadecimal digits: 2001:0db8:85a3:0000:0000:8a2e:0370:7334. While all eight
groups must have four digits, leading zeros can be omitted: 2001:db8:85a3:0:0:8a2e:370:7334
and groups of consecutive zeros replaced with two colons: 2001:db8:85a3::8a2e:370:7334. To
avoid ambiguity, the double-colon substitution can only be performed once per address.
A 128-bit address provides 2128 potential address combinations.
IPv4 vs. IPv6
IPv4 addresses differ from IPv6 addresses in several ways.
вЂў
IPv4 addresses use 32 bits as opposed to the 128 bits used in IPv6 addressing.
CompTIAВ® Network+В® (Exam N10-005)
190
Copyright В© Element K Corporation
LESSON 6
вЂў
While implementing IPv4 addresses, IPSec is optional. However, IPSec is not
optional in IPv6 addresses.
вЂў
The header information structure is different between IPv4 and IPv6 addresses.
Implement IPv6 Addresses
IPv6 has many advanced features that are not available in IPv4. Although IPv6 is being implemented in test and production networks, IPv4 is implemented on a larger scale. As there are
many IPv4 networks, when implementing IPv6 on a network, you need to follow these guidelines to ensure backward compatibility with IPv4.
Guidelines:
To implement IPv6 on an IPv4 network, follow these guidelines:
вЂў
Implement IPv6 in phases throughout the organization.
вЂў
Ensure interoperability between IPv4 and IPv6 during the initial phase of the transition from IPv4 to IPv6, rather than trying to replace IPv4 completely with IPv6.
вЂў
Avoid using subnet masks while migrating your network to IPv6 as it is not necessary to use subnet masks in networks that implement IPv6. In case the existing
IPv4 network uses subnet masks, they can be avoided.
вЂў
Remember that the network classes used in IPv4 will not apply to IPv6.
вЂў
Conп¬Ѓgure AAAA DNS records for IPv6 although IPv4 DNS services make use of
A records.
вЂў
Upgrade the necessary hardware to support IPv6. This includes all nodes, hosts,
and routers on the network.
вЂў
Ensure that the IPv6 environment, once implemented, is scalable to support the
future requirements of your network.
вЂў
Ensure that IPv6 packets that are sent on an IPv4 network are encapsulated. This
can be done by tunneling.
Example:
Jason Smith is the network administrator in OGC Technologies. His team was recently
involved in migrating the IPv4 address space to IPv6. In the deployment planning
meeting, the team agreed to implement IPv6 progressively to ensure that any issues
that came up during transition could be resolved. As most of the hardware, such as
routers, needed to be replaced before the actual implementation, Jason placed procurement orders for all IPv6вЂ“compatible hardware that would be needed.
The team also updated current A records in the DNS to AAAA which IPv6 supported.
As the network classes used in the IPv4 environment no longer applied to IPv6, he
created new network classes to suit IPv6. Since OGC had planned to progressively
migrate to IPv6, a considerable part of the network was still working on IPv4. The
IPv6 data packets were also encapsulated so that they could be transmitted on the IPv4
network.
Lesson 6: TCP/IP Addressing and Data Delivery
191
Copyright В© Element K Corporation
LESSON 6
ACTIVITY 6-6
Implementing IPv6 Addressing
Scenario:
In this activity, you will identify components of the IPv6 protocol.
1.
Which is not a limitation of IPv4?
a) 128вЂ“bit address space.
b) Depletion of Class A and B network addresses.
c) Unassigned and unused address ranges.
d) Division of the address space into fixed classes.
2.
True or False? IPv6 data packets cannot be sent on IPv4 networks.
True
False
3.
What are the factors that an organization may need to consider before upgrading to
IPv6?
4.
True or False? DNS A records are compatible with IPv6.
True
False
5.
What will be the reasons for the widespread future deployment of IPv6?
CompTIAВ® Network+В® (Exam N10-005)
192
Copyright В© Element K Corporation
LESSON 6
TOPIC F
Delivery Techniques
In terms of network data delivery, you have identiп¬Ѓed two pieces of the puzzleвЂ”data addressing and network connection mechanisms. Once you have the data properly packaged and
addressed, and a functional network connection established between the source and destination
computers, you are ready to transmit data across the network. In this topic, you will identify
the techniques that ensure that data is transmitted completely and accurately across a network.
Data that is sent through a network can encounter several variables that can delay or even alter
the data before it is received. The challenge for network administrators is to implement delivery techniques within the network to ensure the integrity of data transmission across the
network. When implemented, these delivery techniques can detect errors in data transmissions
and recover from the errors using recovery mechanisms.
Connections
A connection is a virtual link between two nodes established for the duration of a communication session. Connections provide п¬‚ow control, packet sequencing, and error recovery functions
to ensure reliable communications between nodes.
Connection Services
Connection services ensure reliable delivery by detecting and attempting to correct
transmission problems.
Connection Service
Description
Unacknowledged
connectionless
This service provides no acknowledgement of successfully transmitted data. The application must provide its own reliability
checks. Simplex communications use this type of service.
Acknowledged
connectionless
Nodes do not establish a virtual connection. However, they do
acknowledge the successful receipt of packets. Web (HTTP) communications use this type of connection service.
Connection-oriented
Nodes establish a virtual connection for the duration of the session. Nodes negotiate communication parameters and typically
share security information to establish a connection.
This connection service provides the means for п¬‚ow control,
packet sequencing, and error recovery functions. Traditional, nonweb-based networking applications often use connection-oriented
services.
Connection Modes
There are three commonly used connections modes.
Lesson 6: TCP/IP Addressing and Data Delivery
193
Copyright В© Element K Corporation
LESSON 6
Connection Mode
Description
Simplex
The simplex mode of communication is the one-way transmission of information. There is no return path. Because the
transmission operates in only one direction, simplex mode can
use the full bandwidth of the medium for transmission.
Radio and television broadcasts are simplex mode transmissions.
Half duplex
The half duplex mode of communication permits two-way communications, but in only one direction at a time. When one
device sends, the other must receive; then they can switch roles
to transfer information in the other direction. Half duplex mode
can use the full bandwidth of the medium because the transmission takes place in only one direction at a time.
Full duplex
The full duplex mode of communication permits simultaneous
two-way communications. A device can both send and receive
data simultaneously. Sending and receiving can occur over different channels or on the same channel. Generally, neither the
sender nor the receiver can use the full bandwidth for their individual transmission because transmissions are allowed in both
directions simultaneously.
Full duplex mode also may be called a bi-directional transmission. If someone speaks about вЂњduplexвЂќ transmissions, they
likely are referring to the full-duplex mode. Telephone systems
are full duplex devicesвЂ”all persons involved can talk simultaneously. Many modern networking cards support the full duplex
mode.
There are full bandwidth transmissions in some network environments, namely full-duplexed switched
Ethernet.
Flow Control
Flow control is a technique for optimizing data exchange between systems. If too much data is
sent at once, the receiving node can become overwhelmed, dropping packets that arrive too
quickly to process. If too little data is sent, the receiver sits idle waiting for more data to
arrive. Buffering and data windows are two п¬‚ow control techniques commonly used in computer networking.
Buffering
Deп¬Ѓnition:
Buffering is a п¬‚ow control technique in which data received is stored on a temporary
high-speed memory location, called a buffer, until the main system components are
ready to work with the data. In a networking situation, the network card itself handles
buffering so that the processor does not have to become involved. Buffering is also
used when reading information from the disk or RAM, in which case the buffer is
more often called a cache.
CompTIAВ® Network+В® (Exam N10-005)
194
Copyright В© Element K Corporation
LESSON 6
Example: Cache Controller
A cache controller, a specialized processor chip, manages caching so that the processor
does not have to.
Flooding
Even with a high-speed buffer, data can sometimes arrive too quickly to be handled.
This situation is called п¬‚ooding. To avoid п¬‚ooding, receiving devices typically send a
squelch signal to the sender when the buffer is approximately 75 percent full. Upon
receiving a squelch signal, the sender will slow or halt further data transmissions until
the receiver catches up.
Data Windows
Data windows constitute a п¬‚ow control technique in which multiple packets are sent as a unit
called a block or a window. The recipient acknowledges each window rather than each packet,
resulting in higher throughput. Two types of data windows are available: п¬Ѓxed length and sliding. Data windows deп¬Ѓne how much data can be sent without waiting for an acknowledgment.
The п¬‚ow control window, whose size is set by the receiver, ensures that packets are sent in the
same speed as the receiverвЂ™s processing. The size of a data window is set by a sender.
In the simplest case, a sender transmits one packet and then waits for an acknowledgement
from the recipient, an ACK signal. If the recipient is busy, the sender sits idle until it receives
the ACK, after which it sends the next packet. Throughput can be increased if data is sent in
larger packages, with the recipient sending fewer acknowledgements.
Figure 6-22: Multiple packets sent as a block.
Figure 6-23: Data window sizes can be fixed or variable.
Lesson 6: TCP/IP Addressing and Data Delivery
195
Copyright В© Element K Corporation
LESSON 6
Fixed Length and Sliding Windows
The data window size can be п¬Ѓxed or variable. With п¬Ѓxed length windows, every block
contains the same number of packets. To avoid п¬‚ooding the buffers of some devices,
п¬Ѓxed length windows are typically small. So, while п¬Ѓxed length windows are more
efficient than sending individual packets, they are less efficient than sliding windows.
Sliding windows use variable block sizes. The п¬Ѓrst block sent contains a small number
of packets. Each subsequent block is a bit larger, until the sender п¬‚oods the buffers of
the recipient. Upon receiving the squelch signal, the sender reduces the window size
and resumes transmission. The window size is continually reevaluated during transmission, with the sender always attempting to send the largest window it can to speed
throughput.
Error Detection
Error detection is the process of determining if transmitted data has been received correctly
and completely. Typically, the sender attaches extra bits in the form of an Error Detection
Code (EDC) to the footer of the transmitted data to indicate its original contents. The receiver
generates an EDC and compares it with the transmitted EDC to determine if the data has been
altered en route.
вЂў
If the EDCs match, the receiver processes the data.
вЂў
If the receiver п¬Ѓnds an error, it requests retransmission of data.
Error detection can also include a correction component, Error Detection and Correction
(EDAC), wherein if data has an error, the receiver can rebuild the data.
Figure 6-24: The error detection process.
Parity Check
Parity check is a process used to detect errors in memory or data communication. In this process:
1. A computer checks the data sent and received on a word-by-word basis.
2.
The sender adds one bit to each word of the data and then transmits to the receiver.
3.
The receiver compares the number of ones within a transmitted byte to those received.
CompTIAВ® Network+В® (Exam N10-005)
196
Copyright В© Element K Corporation
LESSON 6
4.
If the count matches, the data is assumed to be valid. If a word is determined to be corrupt, the receiver requests retransmission of the data.
Figure 6-25: Parity check detects errors during data communication.
Cyclic Redundancy Check
Cyclic Redundancy Check (CRC) is an error detection method in which a predeп¬Ѓned mathematical operation is used to calculate a CRC code. In this error detection process:
1. The sender attaches the CRC to a block of data and transmits it to a receiver.
2.
The receiver calculates its own CRC value for the data block and compares it to the transmitted CRC.
3.
If the values match, the receiver assumes the data was unaltered during transmission.
Figure 6-26: CRC used to detect errors in transmitted data.
CRC Considerations
Typically, CRC checks are applied to large blocks of data, such as all the data sent in a
packet. Thus, fewer error detection bits must be transmitted with the data in a packet.
However, if a CRC check fails, the entire block must be retransmitted. In general,
though, CRC checking uses less network bandwidth than parity checking.
Lesson 6: TCP/IP Addressing and Data Delivery
197
Copyright В© Element K Corporation
LESSON 6
ACTIVITY 6-7
Identifying Data Delivery Techniques
Scenario:
In this activity, you will identify the characteristics of reliable data delivery techniques.
1.
Which are techniques for error detection?
a) Sliding windows
b) Parity checking
c) CRC
d) EDAC
2.
True or False? Parity checking adds overhead to network transmissions.
True
False
3.
Which statement is true of sliding and fixed length windows?
a) Sliding windows are groups of packets selected at random from transmitted data,
whereas fixed length windows always include the same sequence of packets.
b) Fixed length windows always contain the same number of packets, while sliding windows contain 8, 16, or 32 packets.
c) Sliding windows contain a variable number of packets in a block, while fixed length
windows always contain the same number.
d) Fixed length windows contain a variable number of packets in a block, while sliding
windows always contain the same number.
4.
Buffer flooding is the process of:
a) Sending data at a speed the receiver can handle.
b) Corrupting the buffers in the receiver.
c) Filling the buffer of the receiver with padding (empty) packets.
d) Overfilling the buffers in the receiver.
5.
Match the error detection technique with the amount of data that it checks.
Parity check
CRC
EDAC
a. Packet
b. Block
c. Byte
CompTIAВ® Network+В® (Exam N10-005)
198
Copyright В© Element K Corporation
LESSON 6
Lesson 6 Follow-up
In this lesson, you learned how data is delivered to its intended destination reliably and unaltered by using data addressing, connection mechanisms, and techniques that ensure the reliable
delivery of data. Using this knowledge, you can ensure that when users make a request for a
network service or send data across your network, their request or data arrives at the intended
destination.
1.
In your opinion, which class of IP address will suit your organization?
2.
Which delivery techniques will you implement most often on your network?
Lesson 6: TCP/IP Addressing and Data Delivery
199
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
200
Copyright В© Element K Corporation
LESSON 7
LESSON 7
Lesson Time
3 hour(s), 20 minutes
TCP/IP Services
In this lesson, you will identify the major services deployed on TCP/IP networks.
You will:
вЂў
Assign IP addresses statically and dynamically.
вЂў
Identify host name resolution methods on a TCP/IP network.
вЂў
Identify common TCP/IP commands and their functions.
вЂў
Identify the common protocols and services in use on a TCP/IP network.
вЂў
Identify various TCP/IP interoperability services.
Lesson 7: TCP/IP Services
201
Copyright В© Element K Corporation
LESSON 7
Introduction
In the previous lesson, you learned how the TCP/IP protocol suite uses IP addressing on networks to enable communication. The TCP/IP protocol suite also includes services that aid in
managing your TCP/IP network. In this lesson, you will learn how the services that are part of
the TCP/IP protocol suite can be used on your network.
To manage a TCP/IP network, you need to understand IP addressing methods. But you also
have to be able to implement an addressing scheme, and support it on an ongoing basis. To do
that, you will need to understand and use TCP/IP services and tools that enable you to conп¬Ѓgure, monitor, and troubleshoot your TCP/IP network.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂў
вЂў
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.3 Explain the purpose and properties of IP addressing.
вЂ”
1.5 Identify common TCP and UDP default ports.
вЂ”
1.6 Explain the function of common networking protocols.
вЂ”
2.3 Explain the purpose and properties of DHCP.
вЂ”
4.3 Given a scenario, use appropriate software tools to troubleshoot connectivity
issues.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.6 Explain the function of common networking protocols.
вЂ”
1.7 Summarize DNS concepts and its components.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
4.3 Given a scenario, use appropriate software tools to troubleshoot connectivity
issues.
Topic D:
вЂ”
вЂў
1.6 Explain the function of common networking protocols.
Topic E:
вЂ”
1.6 Explain the function of common networking protocols.
вЂ”
5.2 Explain the methods of network access security.
CompTIAВ® Network+В® (Exam N10-005)
202
Copyright В© Element K Corporation
LESSON 7
TOPIC A
Assign IP Addresses
You have learned that each node needs an IP address to communicate on a TCP/IP network.
An administrator can manually assign these IP addresses or the assignment can be done automatically without manual intervention. In this topic, you will learn the different methods for
assigning IP addresses to your nodes, and how to use the tools that support IP address assignment.
Depending on the scope and size of your network, it may be just as easy to manually assign IP
addresses to all your nodes as it is to install and maintain a service to do it for you dynamically. By understanding the different methods available to you for assigning IP addresses, you
can choose the method that best suits your network.
Static and Dynamic IP Addressing
On a TCP/IP network, you can assign IP address information statically to nodes by manually
entering IP addressing information on each individual network node. Or, you can assign IP
addresses dynamically, by using the Dynamic Host Conп¬Ѓguration Protocol (DHCP) service.
Figure 7-1: Static and dynamic IP addresses assignment.
Static IP Address Assignment
Conп¬Ѓguring TCP/IP statically on a network requires that an administrator visit each node to
manually enter IP address information for that node. If the node moves to a different subnet,
the administrator must manually reconп¬Ѓgure the nodeвЂ™s TCP/IP information for its new network location. In a large network, conп¬Ѓguring TCP/IP statically on each node can be very time
consuming, and prone to errors that can potentially disrupt communication on the network.
Static addresses are typically only assigned to systems with a dedicated functionality, such as
router interfaces, network-attached printers, or servers that host applications on a network.
Lesson 7: TCP/IP Services
203
Copyright В© Element K Corporation
LESSON 7
Figure 7-2: Static IP address assignment using the Internet Protocol (TCP/IP) Properties dialog box.
DHCP
DHCP is a network service that automatically assigns IP addresses and other TCP/IP conп¬Ѓguration information on network nodes conп¬Ѓgured as DHCP clients. A DHCP server allocates IP
addresses to DHCP clients dynamically, and should be conп¬Ѓgured with at least one DHCP
scope. The DHCP server is conп¬Ѓgured with IP addresses that it can use, called a scope.
When a DHCP server enables the scope, it automatically leases TCP/IP information to DHCP
clients for a deп¬Ѓned lease period. The scope contains a range of IP addresses and a subnet
mask, and can contain other options, such as a default gateway and DNS addresses. A scope
also needs to specify the duration of the lease, and usage of an IP address after which the node
needs to renew the lease with the DHCP server. The DHCP server determines this duration,
which can be set for a deп¬Ѓned time period or for an unlimited length of time.
Figure 7-3: A DHCP server dynamically assigns IP addresses to clients.
CompTIAВ® Network+В® (Exam N10-005)
204
Copyright В© Element K Corporation
LESSON 7
DHCP Options
DHCP options allow you to enable and conп¬Ѓgure speciп¬Ѓc values and their assignment
and distribution to DHCP clients based on the different parameters such as the scope,
server, class or client-speciп¬Ѓc levels. DHCP options allow you to specify the names of
DNS servers and domain suffixes. This will be useful when there are a number of DNS
servers on the same network and you want to specify a particular DNS server or a speciп¬Ѓc domain for your DHCP client. The DHCP options can be modiп¬Ѓed from the
DHCP Options Properties dialog box.
There are different categories of options for DHCP. These options will always apply to
all clients unless overridden by other settings at the clientвЂ™s end.
Category
Description
Global options
Includes options that are applicable globally for all DHCP servers and
their clients.
Scope options
Includes options that are applicable to clients that obtain leases within a
particular scope.
Class options
Includes options that are applicable to clients that specify a class when
obtaining a scope lease.
Reserved client
options
Includes options that are applicable to any client with a scope reservation for its IP address.
DHCP Reservations
Reservations are lease assignments in DHCP that allow you to conп¬Ѓgure a permanent
IP address for a particular client on the subnet. Reserved IP addresses differ from statically conп¬Ѓgured IP addresses; in case of any changes in network parameters on the
DHCP server, IP addresses receive the changes when they renew their lease.
The DHCP Lease Process
The DHCP lease process comprises several steps.
Figure 7-4: Steps in the DHCP lease process.
Lesson 7: TCP/IP Services
205
Copyright В© Element K Corporation
LESSON 7
Step
Description
Step 1: Node comes online
A node conп¬Ѓgured to use DHCP comes online and loads a simple version
of TCP/IP.
Step 2: DHCP discovery
After a node comes online and is ready to communicate with a DHCP
server, it transmits a Bootstrap Protocol (BOOTP) broadcast, called a
DHCP discover, to the networkвЂ™s broadcast address of 255.255.255.255 to
check if any DHCP servers are online, and request an IP address.
Step 3: DHCP offer
DHCP servers that are online respond with a directed lease offer packet
that contains an IP address that the node can lease.
Step 4: DHCP request
The node accepts the п¬Ѓrst offer it receives, and returns a request to lease
the IP address from the DHCP server, called a DHCP request.
Step 5: DHCP ACK
The DHCP server acknowledges the request from the node with a DHCP
ACK, that has the IP address and settings required for the leasing time
and starts the lease. The DHCP server also updates the IP address in its
database as being in use to avoid reassigning the address.
Step 6: Unused DHCP offers When the unused offers expire, all the other DHCP servers return the
expire
offered IP addresses to the common pool in their DHCP scopes.
Use the acronym DORA to remember the steps in DHCP lease process: Discover, Offer, Request, Acknowledge.
All DHCP servers respond to clients the same way despite which vendor they are manufactured by because the
process follows a standard methodology.
BOOTP
Any device on the network will need to know its IP address before it can communicate. Although usually a host can read this information from its internal disk, some
devices do not have storage, so they need other devices on the network to provide
them with an IP address and other information so that they can become IP hosts. This
process is called bootstrapping, and to provide this capability, BOOTP was created.
BOOTP is a UDP network protocol. BOOTP servers assign IP addresses from a pool
of available addresses. BOOTP enables вЂњdiskless workstationвЂќ computers to obtain an
IP address prior to loading an advanced operating system.
DHCP Relay Agent
A DHCP relay agent is a service that captures a BOOTP broadcast and forwards it
through the router as a unicast transmission to the DHCP server on another subnet.
BOOTP uses a local broadcast that cannot be sent through routers on the network. As
an administrator of a TCP/IP network using DHCP, you must either have a DHCP
server on each subnet and conп¬Ѓgure the router to forward the broadcasts, or conп¬Ѓgure
a DHCP relay agent. Having multiple DHCP servers also ensures a higher degree of
fault tolerance as the unavailability of a DHCP server on a subnet does not prevent
nodes from requesting or renewing their leases.
CompTIAВ® Network+В® (Exam N10-005)
206
Copyright В© Element K Corporation
LESSON 7
The DHCP server returns an offer to the relay agent, which in turn presents the offer to
the client. Once the client has its lease, it also has the DHCP serverвЂ™s IP address, so it
does not need to use the relay agent to renew the lease. An important factor you need
to consider on a network with multiple subnets is that the routers on the network must
be RFC 1542вЂ“compliant to allow a DHCP server to receive the broadcast message
from a node.
IP Addresses Recovery
The DHCP lease process is important to the overall performance of a DHCP system.
By leasing addresses to clients instead of permanently assigning them, a DHCP server
can recover addresses leased to offline clients that no longer need the addresses.
APIPA
Automatic Private IP Addressing (APIPA) is a service that enables a DHCP client computer to
conп¬Ѓgure itself automatically with an IP address in the range of 169.254.0.1 to
169.254.255.254, in case no DHCP servers respond to the clientвЂ™s DHCP discover broadcast.
In case of a DHCP server failure, when the clients on the network cannot obtain IP addresses,
the clients can use APIPA to assign themselves an IP address in the 169.254.x.x address range
to enable communication with other clients. Thus, APIPA enables DHCP clients to initialize
TCP/IP and communicate on the local subnet even in the absence of an active DHCP scope.
APIPA addresses are not routable, so computers with APIPA addresses cannot communicate
outside of the local subnet.
Figure 7-5: Automatic assigned private IP addresses.
If a client cannot reach destinations outside of the local subnet, check the machineвЂ™s IP address. If the client
shows an APIPA address, it signals that the DHCP server is unavailable.
APIPA Support
APIPA is available on client systems including: Windows XP, and Windows 7 and
server operating systems including: Windows 2008 and Windows 2008 R2. Because
APIPA requires no administrative conп¬Ѓguration, APIPA addressing can be used for
small offices where local subnet communication is all that is required.
Lesson 7: TCP/IP Services
207
Copyright В© Element K Corporation
LESSON 7
IP Conп¬Ѓguration Utilities
You can use the IP conп¬Ѓguration utility for your operating system to see TCP/IP conп¬Ѓguration
information.
Utility
Description
ipconfig
Displays connection-speciп¬Ѓc DNS suffix, IP address, subnet mask, and default
gateway information. Must be run from a command line. To display additional
information about the IP conп¬Ѓguration, use the ipconfig /all parameter with
the command.
Supported on server systems including Windows Server 2008 and Windows
Server 2008 R2, and client systems including Windows 7, Windows XP, Windows
NT, and NovellВ® NetWareВ®.
ifconfig
Displays the status of currently active network interface devices. Using options,
you can dynamically change the status of the interfaces and their IP address. Supported on Linux and UNIX.
dhclient
Allows you to conп¬Ѓgure and manage DHCP settings on the network interfaces of
a computer. Supported on Linux and UNIX.
ipconп¬Ѓg Options for DHCP
The Windows ipconfig utility provides options for managing dynamic address
leases:
вЂў
ipconfig /release forces the release of an IP address used by a client.
вЂў
ipconfig /renew requests the renewal of an IP address for a client.
The system п¬Ѓrst attempts to obtain a DHCP address, and if a DHCP server fails to
respond, it will switch to APIPA addressing.
The ping Command
The ping command is used to verify the network connectivity of a computer, and also to
check to see if the target system is active. It veriп¬Ѓes the IP address, host name, and
reachability of the remote system by using and listening for echo replies. ping uses ICMP to
check the connections with remote hosts by sending out echo requests as ICMP
ECHO_REQUEST packets to the host whose name or IP address you specify on the command
line. ping listens for reply packets.
ping is an acronym for packet Internet groper.
Figure 7-6: Using ping tests the connectivity between two hosts.
CompTIAВ® Network+В® (Exam N10-005)
208
Copyright В© Element K Corporation
LESSON 7
Syntax of ping command
The syntax of the ping command is:
ping target
The target variable speciп¬Ѓes the IP address or DNS name of a computer on the network. Ping uses the DNS setting to resolve the DNS name into an IP address.
ping Options
You can ping a computer or an IP address. You can also ping the loopback address
(127.0.0.1) to test whether TCP/IP has initialized on an individual system. If the computer has a default gateway, you can ping remote systems.
To list other options for the ping command, enter ping/? at the command prompt.
Some of the options include setting the packet size, changing the Time To Live (TTL)
value, and specifying how many times to ping the host.
вЂў
Packet size: By default, data packets are sent as 32 bytes. You can specify a
larger size to test response time, the maximum size being 65,500 bytes. To change
the packet size, use the -l option followed by the packet length.
ping target [-l size]
вЂў
TTL: A value that determines how many hops an IP packet can travel before
being discarded.
ping target [-i TTL]
вЂў
Packet Count: Speciп¬Ѓes the number of packets with which a remote host is
pinged. The default is four packets. You can specify a higher number of packets
with the -n option.
ping target [-n packet count]
ping Blocking
As a security measure, some public Internet hosts and routers might be conп¬Ѓgured to
block incoming packets that are generated by the ping command. (They might also
block packets from other TCP/IP diagnostic utilities such as the tracert command.)
Pinging these hosts will fail even if the host is online. Keep this in mind when you try
to ping large public Internet sites; if you are trying to determine if one of these sites is
up and running, a better method is simply to use a web browser to connect to the site
directly.
Ports
Deп¬Ѓnition:
In TCP and UDP networks, a port is the endpoint of a logical connection. Client computers connect to speciп¬Ѓc server programs through a designated port. All ports are
assigned a number in a range from 0 to 65,535. The IANA separates port numbers into
three blocks: well-known ports, which are preassigned to system processes by IANA;
registered ports, which are available to user processes and are listed as a convenience
by IANA; and dynamic ports, which are assigned by a client operating system as
needed when there is a request for service.
Three well recognized blocks of port numbers are available for use in DHCP.
Lesson 7: TCP/IP Services
209
Copyright В© Element K Corporation
LESSON 7
Block
Description
Well-known ports
Port range: 0 to 1,023
These ports are preassigned for use by common, or well-known services.
Often the services that run on these ports must be started by a privileged
user. Services in this range include HTTP on TCP port 80, IMAP on
TCP port 143, and DNS on UDP port 53.
Registered ports
Port range: 1,024 to 49,151
These ports are registered by software makers for use by speciп¬Ѓc applications and services that are not as well-known as the services in the
well-known range. Services in the registered port range include SOCKS
proxy on TCP port 1080, Kazaa peer-to-peer п¬Ѓle sharing on TCP port
1214, and Xbox Live on TCP and UDP port 3074.
Dynamic or private
ports
Port range: 49,152 to 65,535
These ports are set aside for use by unregistered services, and by services needing a temporary connection.
Example:
Well-Known TCP Port Numbers
The commonly used TCP port numbers are listed in the table along with the services
run using the ports.
Port Number
Service Name
Service
7
echo
Ping
20
ftp-data
File Transfer [Default Data]
21
ftp
File Transfer [Control]
22
ssh
SSH
23
telnet
Telnet
25
smtp
SMTP
53
dns
DNS
67
bootps
DHCP (BOOTP) server
68
bootpc
DHCP (BOOTP) client
80
http
HTTP
110
pop3
POP3
137
netbios
NetBIOS naming service
143
imap
IMAP
194
irc
Internet Relay Chat (IRC)
389
ldap
LDAP
443
https
HTTP-secure
546
dhcpv6-client
DHCPv6 client
547
dhcpv6-server
DHCPv6 server
3389
rdp
RDP
CompTIAВ® Network+В® (Exam N10-005)
210
Copyright В© Element K Corporation
LESSON 7
The complete list of well-known TCP ports and other port number assignments is available online at
www.iana.org/assignments/port-numbers
Well-Known UDP Port Numbers
The commonly used UDP port numbers are listed in the table along with the services
run using the ports.
Port Number
Service Name
Service
7
echo
Ping
22
ssh
SSH
23
telnet
Telnet
53
dns
DNS
67
bootps
DHCP (BOOTP) server
68
bootpc
DHCP (BOOTP) client
69
tftp
TFTP
123
ntp
NTP
137
netbios
NetBIOS naming service
143
imap
IMAP
161
snmp
SNMP
389
ldap
LDAP
546
dhcpv6-client
DHCPv6 client
547
dhcpv6-server
DHCPv6 server
3389
rdp
RDP
The complete list of well-known UDP ports and other port number assignments is available online at
www.iana.org/assignments/port-numbers
Sockets
Deп¬Ѓnition:
A socket is a communication endpoint in an IP-based network. In TCP/IP, a socket
links an IP address with the port number of a service. Sockets help in delivering data
packets to the appropriate application process running in the target node. A socket
address is the combination of the protocol, IP address, and port number.
Socket Format
Used to identify the target node, a socket employs the format:
{protocol, ip address, port number}
Lesson 7: TCP/IP Services
211
Copyright В© Element K Corporation
LESSON 7
Example:
Figure 7-7: Format of an IP address socket.
How to Assign IP Addresses
Procedure Reference: Assign IP Addresses
To assign IP addresses:
1.
Choose Startв†’Network.
2.
In the Network window, on the toolbar, click Network and Sharing Center.
3.
In the Network and Sharing Center window, in the left pane, click the Change
adapter settings link.
4.
Right-click your Local Area Connection object and choose Properties.
5.
In the Local Area Connection Properties dialog box, in the This connection uses
the following items section, select Internet Protocol Version 4 (TCP/IPv4).
6.
Click Properties, and in the Internet Protocol Version 4 (TCP/IPv4) Properties
dialog box, on the General tab, assign an IP address to your system.
вЂў
To use automatic IP addressing for the IP address, subnet mask, and default
gateway, select the Obtain an IP address automatically option.
вЂў
7.
To manually conп¬Ѓgure a static IP address, subnet mask, and default gateway.
a.
Select the Use the following IP address option.
b.
In the IP address, Subnet mask, and Default gateway text boxes, enter
the TCP/IP information for your network.
In the Internet Protocol Version 4 (TCP/IPv4) Properties dialog box, conп¬Ѓgure
the IP address of your DNS server.
вЂў
To automatically conп¬Ѓgure the IP address for a DNS server, select the
Obtain DNS server address automatically option.
вЂў
To manually conп¬Ѓgure a static DNS server address.
a.
Select the Use the following DNS server addresses option.
b.
In the Preferred DNS server and Alternate DNS server text boxes,
enter the DNS server addresses for your network.
8.
Click OK to close the Internet Protocol Version 4 (TCP/IPv4) Properties dialog box.
9.
Click Close to close the Local Area Connection Properties dialog box for your
selected network connection.
CompTIAВ® Network+В® (Exam N10-005)
212
Copyright В© Element K Corporation
LESSON 7
ACTIVITY 7-1
Assigning IP Addresses Manually
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Your computer is currently conп¬Ѓgured to lease an IP address from the classroom DHCP server.
Scenario:
You are a network administrator for a start-up company with leased addresses from their ISP
in the range of 192.168.1.25 to 192.168.1.95. The subnet mask is 255.255.255.0, and the IP
address of the DNS server is 192.168.1.200. The DNS server is also the default gateway on
the network. You have been assigned the task of conп¬Ѓguring their computers to use the IP
addresses provided to them by their ISP.
This activity uses internal IP addresses in the 192.168.1.x range for demonstration purposes. An ISP would not
allocate addresses in this range.
Lesson 7: TCP/IP Services
213
Copyright В© Element K Corporation
LESSON 7
What You Do
How You Do It
1.
Configure your computer with a
static IP address.
a. Choose Startв†’Control Panel.
вЂў
IP address = 192.168.1.##,
where .##, is your student number.
b. In the Control Panel window, in the
Adjust your computerвЂ™s settings section,
click the Network and Internet link.
вЂў
вЂў
вЂў
Subnet mask = 255.255.255.0
Default gateway = 192.168.1.200
DNS server = 192.168.1.200
c. In the Network and Internet window, click
the Network and Sharing Center link.
d. In the Network and Sharing Center window, in the left pane, click the Change
adapter settings link.
e. Right-click Local Area Connection and
choose Properties.
f.
In the Local Area Connection Properties
dialog box, in the This connection uses
the following items section, select
Internet Protocol Version 4 (TCP/IPv4).
and click Properties.
g. In the Internet Protocol Version 4 (TCP/
IPv4) Properties dialog box, on the
General tab, select the Use the following
IP address option.
h. In the IP address text box, click and type
192.168.1.##, where ## is your student
number.
i.
Click the Subnet mask text box.
j.
Observe that the default subnet mask for
the IP address is auto populated.
k. In the Default gateway text box, click and
type 192.168.1.200
CompTIAВ® Network+В® (Exam N10-005)
214
Copyright В© Element K Corporation
LESSON 7
l.
Verify that the Use the following DNS
server addresses option is selected and in
the Alternate DNS server text box,
192.168.1.200 is entered.
m. Click OK to close the Internet Protocol
Version 4 (TCP/IPv4) Properties dialog
box.
n. Click Close to close the Local Area Connection Properties dialog box. Close the
Network Connections window.
2.
Verify your IP information.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
b. At the command prompt, enter
ipconfig /all to view the network
details.
c. Verify that, in the Command Prompt window, the Ethernet adapter Local Area
Connection section displays the IP
address, subnet mask, default gateway,
and DNS server information you entered.
Lesson 7: TCP/IP Services
215
Copyright В© Element K Corporation
LESSON 7
3.
Test your ability to communicate
over TCP/IP with the DNS server.
a. At the command prompt, enter ping
192.168.1.200
b. Observe that the ping command returns
four replies indicating that the connection
to the server was successfully established.
c. Close the Command Prompt window.
ACTIVITY 7-2
Assigning IP Addresses Using APIPA
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Instructor Only Steps (to be performed only on the DC)
To deactivate the DHCP scope:
1. Log in as Administrator with !Pass1234 as the password.
2.
Choose Startв†’Administrative Toolsв†’DHCP.
3.
Expand your DHCP server object for IPv4.
4.
Select and then right-click the scope object.
5.
Choose Deactivate.
6.
In the DHCP dialog box, click Yes.
7.
Minimize the DHCP window.
Scenario:
You have been notiп¬Ѓed that there is a problem with the DHCP server and it will be unavailable
for several hours. You need to use a TCP/IP addressing scheme so your client workstations can
still communicate with one another using APIPA while the DHCP server is down.
CompTIAВ® Network+В® (Exam N10-005)
216
Copyright В© Element K Corporation
LESSON 7
What You Do
How You Do It
1.
a. Choose Startв†’Control Panel.
Configure your computer to use
APIPA.
b. In the Control Panel window, in the
Adjust your computerвЂ™s settings section,
click the Network and Internet link.
c. In the Network and Internet window, click
the Network and Sharing Center link.
d. In the Network and Sharing Center window, in the left pane, click the Change
adapter settings link.
e. Right-click Local Area Connection and
choose Properties.
f.
In the Local Area Connection Properties
dialog box, in the This connection uses
the following items section, select
Internet Protocol Version 4 (TCP/IPv4)
and click Properties.
g. In the Internet Protocol Version 4 (TCP/
IPv4) Properties dialog box, select the
Obtain an IP address automatically
option and click OK.
h. In the Local Area Connection Properties
dialog box, click Close.
i.
2.
Verify your IP information.
Close Network Connections and the Network and Sharing Center windows.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
b. At the command prompt, enter
ipconfig /all
APIPA conп¬Ѓguration can take a moment
because the system п¬Ѓrst attempts to contact a
DHCP server before self-assigning the APIPA
address. If ipconfig /all shows your IP
address and subnet mask as null (all zeros),
wait a minute and run ipconfig /all
again or type ipconfig /renew.
Lesson 7: TCP/IP Services
217
Copyright В© Element K Corporation
LESSON 7
c. Verify that the Ethernet adapter Local
Area Connection section displays the IP
address and subnet mask from the
169.254.0.0 APIPA network.
3.
Test your ability to communicate
over TCP/IP with the DNS server.
a. At the command prompt, enter ping
192.168.1.200
b. Verify that the destination is unreachable
and the error message вЂњPING: transmit
failed. General failureвЂќ is displayed.
Because you are using a nonroutable
APIPA address, you cannot communicate
with the DNS server.
4.
Test your ability to communicate
with another computer on the APIPA
network.
a. At the command prompt, enter ping
169.254.#.# , where #.# is a part of
the address of another computer in the
classroom.
b. Observe from the results that you are able
to communicate with the other system on
the APIPA network.
c. Close the Command Prompt window.
CompTIAВ® Network+В® (Exam N10-005)
218
Copyright В© Element K Corporation
LESSON 7
ACTIVITY 7-3
Assigning IP Addresses with DHCP
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Instructor Only Steps (to be performed only on the DC)
To activate the DHCP scope:
1. Maximize the DHCP window.
2.
Right-click the scope object.
3.
Choose Activate.
4.
Close the DHCP window.
Scenario:
Your company has been experiencing problems with the DHCP server and it has been offline
for several hours. You have just been notiп¬Ѓed that the server is back up and you can change
the APIPA addressing back to DHCP addressing.
What You Do
How You Do It
1.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
Force your computer to lease an IP
address from the DHCP server.
b. In the Command Prompt window, enter
ipconfig /renew
c. Observe that the IPv4 address
192.168.1.## is obtained from the DHCP
server.
2.
Test your ability to communicate
over TCP/IP with the DNS server.
a. At the command prompt, enter ping
192.168.1.200 to ping the DNS server.
b. Observe that you are able to communicate
with the DNS server. Enter exit to close
the Command Prompt window.
Lesson 7: TCP/IP Services
219
Copyright В© Element K Corporation
LESSON 7
TOPIC B
Domain Naming Services
Each node that has an IP address assigned to it also has a descriptive name that is more commonly used to identify it on the network. These descriptive names are easier for users to
remember and use than their 32-bit IP addresses. In this topic, you will identify methods for
host name resolution for TCP/IP networks.
Without host name resolution services, you have to connect to other computers and websites
using their numeric IP addresses. However, for a user, it is easier to remember a descriptive
name like www.ourglobalcompany.com, than its assigned 32-bit IP address: 74.43.216.152.
When you conп¬Ѓgure host name resolution services on your network, you can connect to other
computers and websites using their names rather than a string of numbers.
Host Names
Deп¬Ѓnition:
A host name is a unique name given to a node on a TCP/IP network. A host name
combined with the hostвЂ™s domain name forms the nodeвЂ™s Fully Qualiп¬Ѓed Domain
Name (FQDN). A name resolution service maps the FQDN of the node to its IP
address so that users can use names instead of IP addresses to communicate with other
network nodes and the Internet.
Example:
Figure 7-8: A host name is a part of the FQDN of a server.
Figure 7-9: Components of a domain name.
CompTIAВ® Network+В® (Exam N10-005)
220
Copyright В© Element K Corporation
LESSON 7
FQDN
FQDNs are written using standard dot-delimited notation, and a dot separates each section of the name. The maximum length of an FQDN is 255 characters; each dotdelimited section can be up to 63 characters long. A network node can have more than
one host name assigned to it. Its primary name is its host name; the other names are
called canonical names (CNAMEs), also known as aliases.
Domains
A domain is a grouping of computers on the Internet based on the nature of their
operations. A domain enables communication between its systems as a unit and other
networks on the Internet, instead of maintaining individual connections for each of its
systems. Although there are several types of domains, some of the common ones are
commercial, governmental, and educational domains. Domains are identiп¬Ѓed by their
unique names; for example, com, gov, and edu.
Domain Names
A domain name is a unique name that identiп¬Ѓes an entity on the Internet. Also known
as site names, domain names appear as part of the complete address of a web resource.
They are usually registered by organizations as their website address. A period is used
to separate domain name labels, which can have no more than 63 characters. Domain
names are not case sensitive and they can be up to 255 characters in length.
Domain Names vs. Host Names
A domain name identiп¬Ѓes a collection of computers and devices on the network of a
particular domain. A host name is a unique name that identiп¬Ѓes a speciп¬Ѓed computer or
device in a network. Therefore, host names are subsets of domain names.
ACTIVITY 7-4
Identifying the Local Host Name
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
In this activity, you will use different tools to identify your computerвЂ™s host name.
Lesson 7: TCP/IP Services
221
Copyright В© Element K Corporation
LESSON 7
What You Do
How You Do It
1.
a. Choose Startв†’Control Panel.
Identify the host name and FQDN by
using System Properties.
b. In the Control Panel window, in the
Adjust your computerвЂ™s settings section,
click the System and Security link.
c. In the System and Security window, in the
right pane, in the System section, click
the See the name of this computer link.
d. In the System window, in the Computer
name, domain, and workgroup settings
section, identify the computerвЂ™s name.
e. In the Full computer name section, identify the computerвЂ™s FQDN.
f.
2.
Identify the host name by using the
hostname command.
Identify the host name from the first portion of the FQDN.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
b. In the Command Prompt window, enter
hostname to display the host name of the
system.
c. Observe the host name that is displayed.
3.
Identify the FQDN by using the
ipconfig command.
a. Enter ipconfig /all | more to view
the first page of the network details.
CompTIAВ® Network+В® (Exam N10-005)
222
Copyright В© Element K Corporation
LESSON 7
b. Identify the host name and press the
Spacebar to view the next page of the
network details.
c. In the Ethernet adapter Local Area Connection section, in the Connectionspecific DNS Suffix section, identify the
DNS suffix.
d. Close the Command Prompt and System
windows.
DNS
The Domain Name System (DNS) is a TCP/IP name resolution service that translates FQDNs
into IP addresses. It consists of a system of hierarchical databases that are stored on separate
DNS servers on all networks that connect to the Internet. These servers list IP addresses and
related computer names. Because DNS servers store, maintain, and update databases, they
respond to DNS client name resolution requests to translate host names into IP addresses. All
these servers work together to resolve FQDNs. On internal networks, a local DNS service can
resolve host names without using external DNS servers.
Figure 7-10: DNS server domains.
DNS Components
The DNS database is divided logically into a hierarchical grouping of domains. It is
divided physically into п¬Ѓles called zones. The zone п¬Ѓles contain the actual IP-to-host
name mappings for one or more domains. The zone п¬Ѓle is stored on the DNS server
that is responsible for resolving host names for the domains contained in the zone. For
example, a zone might be responsible for mapping host names to IP addresses within
the ourglobalcompany domain within the .com namespace. Each network node in that
domain will have a host record within the domainвЂ™s zone п¬Ѓle. The record includes the
nodeвЂ™s host name, FQDN, and assigned IP address.
Lesson 7: TCP/IP Services
223
Copyright В© Element K Corporation
LESSON 7
For example, a host named 2008srv in the ourglobalcompany.com domain might have
an IP address of 74.43.216.152. That host would have a host record that maps the
2008srv.ourglobalcompany.com name to the IP address of 74.43.216.152. That host
record will appear in the ourglobalcompany.com zone п¬Ѓle on the DNS server that is
responsible for the ourglobalcompany.com domain.
Static vs. Dynamic Records
Records can be entered into a DNS database either statically or dynamically. A static
record is entered manually by an administrator and does not change unless the administrator manually updates it. A network node can request to add a dynamic DNS record
that can change dynamically. For example, if a client is using DHCP to get its IP
address, each time it leases a new address, it can request an update of its DNS host
record.
Types of DNS Records
Different types of DNS records are available that serve speciп¬Ѓc purposes.
Record Type
Purpose
Address (A)
Maps a host name to its IP address using a 32-bit IPv4 address.
IPv6 address (AAAA)
Maps a host name to its IP address using a 128-bit IPv6 address.
Canonical name (CNAME)
Maps multiple canonical names (aliases) to an A record.
Mail Exchange (MX)
Maps a domain name to a mail exchange server list.
Name Server (NS)
Assigns a DNS zone to access the given authoritative name servers.
Pointer (PTR)
Maps an IP address to the host name for the purpose of reverse
lookup.
Start of Authority (SOA)
Speciп¬Ѓes authoritative information about a DNS zone.
Service Locator (SRV)
Speciп¬Ѓes a generic service location record for newer protocols.
Authoritative Name Servers
An Authoritative Name Server (ANS) is a name server that responds to name-related
queries in one or more zones. The most important function of the ANS is delegation,
which means that part of a domain is delegated to other DNS servers. SOA is the п¬Ѓrst
resource recording the zone.
The DNS Hierarchy
DNS names are built in a hierarchical structure. This allows DNS servers on the Internet to use
a minimum number of queries to locate the source of a domain name. The top of the
structureвЂ”represented by a periodвЂ”contains root name servers. Below that is the top-level
domain name, then the п¬Ѓrst-level domain name, and so on, until the FQDN for an individual
host is complete.
CompTIAВ® Network+В® (Exam N10-005)
224
Copyright В© Element K Corporation
LESSON 7
Figure 7-11: Hierarchical structure of a DNS.
The DNS Name Resolution Process
In the DNS process, DNS servers work together as needed to resolve names on behalf of DNS
clients.
Figure 7-12: Steps in the DNS name resolution process.
Step
Description
Step 1: Client request
When a client needs to resolve a DNS name, it sends a name resolution
request to the DNS resolver. A DNS name resolution request message is
generated by the resolver, which is transmitted to the DNS server address
speciп¬Ѓed during conп¬Ѓguration.
Lesson 7: TCP/IP Services
225
Copyright В© Element K Corporation
LESSON 7
Step
Description
Step 2: Preferred DNS
server
The DNS server, upon receiving the request, checks if the requested name is
in its DNS cache entries or its local DNS database, and returns the IP
address to the client. If there is no match for the requested name, the DNS
server forwards the request to a root name server asking which DNS server
has the entries for the appropriate top-level domain.
Step 3: Root name server
Upon receiving the request, the root name server, reads the top-level domain
of that name and sends a message that contains the IP address of the server
for that top-level domain. The root name server then sends a reply to the
clientвЂ™s DNS server.
Step 4: Top-level domain
server
The clientвЂ™s DNS server contains the IP address of the top-level domain of
the requested name. The DNS server then contacts the top-level domainвЂ™s
DNS server to resolve the name. The top-level domain server reads the
second-level domain of the requested name, and if it can resolve the name,
it sends the desired IP address back to the clientвЂ™s DNS server.
Step 5: Other domain
servers
If the top-level domain cannot resolve the name because of additional levels
in the FQDN, it sends the IP address to the second-level DNS server.
Step 6: Host name resolution
This communication between DNS servers continues until it reaches the
level in the DNS hierarchy where a DNS server can resolve the host name.
Step 7: Host address
The preferred DNS server provides the client with the IP address of the target host.
Recursive and Iterative Name Queries
There are two kinds of DNS queries: recursive and iterative. A recursive query is when
the client requests that its preferred DNS server п¬Ѓnd data on other DNS servers. A
recursive request starts with the client requesting a name to be resolved to an IP
address of its preferred DNS server. If the preferred server cannot resolve the name, it
sends a request, on behalf of the client, to another DNS server.
An iterative query occurs when the client requests only the information a server
already has in its cache for a particular domain name. If the receiving server cannot
resolve the request, it notiп¬Ѓes the client, but does not forward the request on to any
other server.
Recursive queries usually take place between end-user client systems and their preferred DNS servers. Once the recursive query is in process, queries between DNS
servers are usually iterative.
Primary and Secondary DNS Servers
When conп¬Ѓguring a clientвЂ™s DNS settings, it is common to specify both a primary and
a secondary DNS server to provide a more reliable name resolution process. When two
DNS servers are listed, the client queries the primary server п¬Ѓrst. If the primary server
does not answer, the client queries the secondary server. If the primary server returns a
вЂњName Not FoundвЂќ message, the query is over and the client does not query the secondary server. This is because both DNS servers can do recursive and iterative queries,
and both primary and secondary servers should be able to contact the same resources.
If one cannot access the resource, the other will not be able to either.
CompTIAВ® Network+В® (Exam N10-005)
226
Copyright В© Element K Corporation
LESSON 7
The HOSTS File
A HOSTS п¬Ѓle is a plaintext п¬Ѓle conп¬Ѓgured on a client machine containing a list of IP addresses
and their associated host names, separated by at least one space. Comments may be included
after the host name if preceded by the # symbol and separated from the host name by at least
one space.
The HOSTS п¬Ѓle provides an alternative method of host name resolution. An external client can
use a HOSTS п¬Ѓle to resolve names on your internal network without accessing your internal
DNS server. You have to manually conп¬Ѓgure each host name entry in a HOSTS п¬Ѓle.
Figure 7-13: Entries in a HOSTS file.
HOSTS File Usage
The HOSTS п¬Ѓle, however, requires a lot of maintenance, so it is recommended that
you use it only when other methods of host name resolution are not supported, or temporarily unavailable for troubleshooting purposes.
Lesson 7: TCP/IP Services
227
Copyright В© Element K Corporation
LESSON 7
ACTIVITY 7-5
Creating a DNS Record
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
As a networking professional, you need to protect your server from external attacks. As the
п¬Ѓrst step in protecting your DNS server, you decide to hide the actual server name from being
displayed anywhere on the network by creating aliases to confuse the attacker.
What You Do
1.
How You Do It
Display the New Host dialog box.
a. Choose Startв†’Administrative Toolsв†’
DNS.
b. If necessary, in the DNS Manager window,
in the left pane, expand the server
object.
c. Expand the Forward Lookup Zones object
and select Child##.Classnet.com, where
## is the student number.
d. Choose Actionв†’New Host (A or AAAA) to
display the New Host dialog box.
CompTIAВ® Network+В® (Exam N10-005)
228
Copyright В© Element K Corporation
LESSON 7
2.
Add a new host entry for your server
with an associated pointer record.
a. In the New Host dialog box, in the Name
text box, type Server## and press Tab
two times.
b. In the IP address text box, type
192.168.1.## to specify the IP address of
your server.
c. Check the Create associated pointer
(PTR) record check box.
d. Check the Allow any authenticated user
to update DNS records with the same
owner name check box.
e. Click Add Host to add the new host entry
for your server.
f.
In the DNS message box, observe that
вЂњThe host record
Server##.Child##.Classnet.com was successfully created.вЂќ message is displayed,
and click OK.
g. In the New Host dialog box, click Done.
3.
Check the connectivity with your
server.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
b. At the command prompt, enter ping
Server##
c. Observe that you are able to communicate
with the server and get four successful
responses. Enter exit to close the Command Prompt window.
d. Close the DNS Manager window.
Lesson 7: TCP/IP Services
229
Copyright В© Element K Corporation
LESSON 7
ACTIVITY 7-6
Discussing DNS Name Resolution
Scenario:
In this activity, you will identify components of DNS and the name resolution process.
1.
Which are fully qualified domain names?
a) www.everythingforcoffee.com
b) \\fs001\data\new\accounts.mdb
c) data1.ourglobalcompany.dom.\users\home
d) citizensinfo.org
2.
What is the name of the top of the DNS hierarchy?
a) Host record
b) Zone
c) Root
d) First-level domain
3.
True or False? If a preferred DNS server cannot resolve a clientвЂ™s name request, it contacts the DNS server immediately above it in the hierarchy.
True
False
4.
True or False? An advantage of using a HOSTS file for DNS name resolution services is
that updates to the file are automatic.
True
False
5.
Which DNS record type is used to map a host name to its IP address for name resolution?
a) Name Server
b) Pointer
c) Canonical name
d) Address
e) Start of Authority
CompTIAВ® Network+В® (Exam N10-005)
230
Copyright В© Element K Corporation
LESSON 7
TOPIC C
TCP/IP Commands
You have learned about host name resolution for TCP/IP networks. The TCP/IP protocol suite
provides commands you can use to troubleshoot and conп¬Ѓgure connectivity and name resolution. In this topic, you will identify the commands in the TCP/IP protocol suite that can help
you ensure smooth connectivity in your TCP/IP network.
TCP/IP commands allow you to gather information about how your systems are communicating over a TCP/IP network. When used for troubleshooting, these commands can provide
critical information about communication lapses and their causes.
The tracert Command
The tracert command determines the route data takes to get to a particular destination. The
ICMP protocol sends out вЂњTime ExceededвЂќ messages to each router to trace the route. Each
time a packet is sent, the TTL value is reduced before the packet is forwarded, thus allowing
TTL to count how many hops it is away from the destination.
traceroute is the Linux equivalent of the tracert command, which is Windows-based.
If you run the tracert command repeatedly for the same destination, you will normally see different results.
This is because TCP/IP is auto-correcting and takes the fastest route possible across the global network of
Internet routers.
Figure 7-14: tracert output of everythingforcoffee.com.
Lesson 7: TCP/IP Services
231
Copyright В© Element K Corporation
LESSON 7
Network Firewalls
If a network п¬Ѓrewall is conп¬Ѓgured to not allow a tracert or ping through, you
might not be able to trace the route all the way to the end; it might appear to end at
the п¬Ѓrewall. If you get the message вЂњDestination UnreachableвЂќ, a router is not able to
п¬Ѓgure out how to get to the next destination. Even though it does not tell you what is
wrong, it alerts you to the router where the problem is occurring.
tracert Options
You can use various options with the tracert command.
Option
Description
-d
If you are having trouble resolving host names when using tracert,
use the -d option to prevent tracert from trying to resolve host
names. It also speeds up response time since it is not spending time
resolving host names.
-h max_hops
The default number of hops tracert will attempt to reach is 30.
Using the -h option, you can specify more hops or fewer for it to
check.
-j [router]
With loose source routing, you specify the destination router and your
[local_computer] local computer using the -j option. It lets you trace the round trip
rather than the default, which is to get to the destination.
-w timeout
If many of your responses on the tracert are timing out, using the
-w option, you can increase the number of milliseconds to wait before
continuing. If, after increasing the value, destinations are then reachable, you probably have a bandwidth issue to resolve.
The pathping Command
The pathping command provides information about latency and packet loss on a network.
pathping combines the functionality of the ping and tracert commands. Similar to
ping, pathping sends multiple ICMP echo request messages to each router between two
hosts over a period of time, and then displays results based on the number of packets returned
by each router.
It is similar to tracert as it identiп¬Ѓes the routers that are on the path. In the output, it also
displays the path to the remote host over a maximum of 30 hops. In addition, it displays
details of packet transfer between the hosts in a time span of over 25 seconds, and the system
names and their IP addresses. pathping can be used to isolate a router or subnet with issues
as it can display the degree of packet loss at any given router or link.
CompTIAВ® Network+В® (Exam N10-005)
232
Copyright В© Element K Corporation
LESSON 7
Figure 7-15: pathping output for everythingforcoffee.com
pathping Options
The pathping command can be used with different options that allow you to customize the results of the command to your network requirements.
Option
Description
-h maximum hops
Specify the maximum number of hops to locate a destination.
-i address
Specify a source IP address.
-n
Specify that host name resolution can be skipped.
-4 address
Specify the IPv4 addresses that are to be used.
-6 address
Specify the IPv6 addresses that are to be used.
The MTR Utility
The My traceroute (MTR) utility combines ping and traceroute into a single function.
MTR displays the routers traversed, the average time taken for round trip, and packet loss of
each router. This utility helps network administrators identify latency or packet loss between
two routers. MTR is used on Unix-based systems.
The General Public License (GNU) is responsible for licensing and distributing MTR.
Lesson 7: TCP/IP Services
233
Copyright В© Element K Corporation
LESSON 7
ACTIVITY 7-7
Using TCP/IP Commands
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
A node on the network has problems communicating with the DNS server. As the network
administrator, you have reconп¬Ѓgured the network setting on the node. You want to ensure that
the connectivity is successful before you reassign the system to a user.
What You Do
How You Do It
1.
a. Choose Startв†’Command Prompt to open
the Command Prompt window.
Use the ping command to verify that
the DNS server is available.
b. In the Command Prompt window, enter
ping DC
c. Observe that the results display the DNS
serverвЂ™s IP address as 192.168.1.200.
CompTIAВ® Network+В® (Exam N10-005)
234
Copyright В© Element K Corporation
LESSON 7
2.
Use the tracert command to trace
the route from your system to the
DNS server.
a. In the Command Prompt window, enter
tracert /? to view the syntax of the
tracert command.
b. Observe the syntax of the command displayed in the Usage section and the
various options of the command along
with their description.
c. In the Command Prompt window, enter
tracert -d 192.168.1.200
d. Verify that there was only one hop
because it is on the same local network as
your system.
e. Enter cls to clear the screen.
3.
Use the pathping command to display statistics related to network
traffic.
a. At the command prompt, enter
pathping DC
b. Observe that the results display the IP
address and the system name. Verify that
there are no packet errors.
c. Close the Command Prompt window.
Lesson 7: TCP/IP Services
235
Copyright В© Element K Corporation
LESSON 7
TOPIC D
Common TCP/IP Protocols
You have identiп¬Ѓed the common TCP/IP commands and their functions. The TCP/IP protocol
suite also includes protocols that work at different layers of the protocol stack. In this topic,
you will identify the common TCP/IP protocols and services and the functions they provide on
your network.
Once network communication has been established at the lower layers of the protocol stack,
users will deploy applications to complete tasks using that communication link. These tasks
can include transferring and sharing п¬Ѓles, reading and sending email, reading and posting messages on a newsgroup, and browsing the web. The TCP/IP upper-layer protocols and services
make accomplishing these tasks possible. By understanding the function of each of the TCP/IP
protocols, you can choose the appropriate protocol for the desired user task.
FTP
The File Transfer Protocol (FTP) is a TCP/IP protocol that enables the transfer of п¬Ѓles
between a userвЂ™s workstation and a remote host. With FTP, a user can access the directory
structure on a remote host, change directories, search for and rename п¬Ѓles and directories, and
download and upload п¬Ѓles. The FTP daemon or service must be running on the remote host
and an FTP utility may need to be installed on the client. FTP commands must be entered in
lowercase and are available both as DOS and UNIX commands. It works on the Application
layer of the OSI and TCP/IP models.
Figure 7-16: The FTP utility enabling a client to access the FTP server.
FTP works on two TCP channels: TCP port 20 for data transfer and TCP port 21 for control
commands. These channels work together to allow users to execute commands and transfer
data simultaneously. A server-based program answers requests from FTP clients for download.
A command line utility allows users to connect to an FTP server and download п¬Ѓles. You can
initiate an FTP session by entering:
ftp FQDN/IP address of remote host.
Daemons
A daemon is a background process that performs a speciп¬Ѓc operation. Daemon is a
UNIX term, though daemons are supported on other operating systems. Daemons on
Windows are referred to as system agents or services.
FTP Options
You can use several options with the FTP command line utility.
CompTIAВ® Network+В® (Exam N10-005)
236
Copyright В© Element K Corporation
LESSON 7
Option
Used To
-v
Prevent remote server command responses being shown.
-n
Suppress auto-logon at initial connection.
-i
Disable interactive prompting when transferring multiple п¬Ѓles.
-d
Enable debugging, displaying all commands passed between the
FTP client and server.
-g
Disable wildcard character support.
-s: [filename]
Run all the FTP commands contained in the [filename] п¬Ѓle.
-a
Allow use of any local interface during data connection binding.
-w: [windowsize]
Override the default transfer buffer size.
TFTP
Trivial File Transfer Protocol (TFTP) is a simple version of FTP that uses UDP as the
transport protocol, and does not require log on to the remote host. As it uses UDP, it
does not support error correction but provides for higher data integrity. It is commonly
used for bootstrapping and loading applications and not for п¬Ѓle transfer.
Internet Browsers and FTP
Most Internet browsers can support FTP in a GUI mode. A connection to an FTP site
can be made by browsing the Internet, logging on, and connecting. Once connected,
you can drag п¬Ѓles on and off the FTP site the same way you would from Windows
Explorer. There are also a number of third-party FTP utilities that can be used for connecting and loading п¬Ѓles to your FTP site.
Troubleshooting FTP Access
To access most FTP servers, the client needs to connect using a valid user name and
password. Some FTP servers allow limited access through an anonymous connection.
If anonymous access is disabled on the remote host, users will need login credentials.
To use this option, log on using the user name anonymous, and enter your email
address for the password.
When connecting to an FTP server, logging on poses the biggest problems. You need
to provide the correct credentials to log on to the FTP server. Most users are only
granted read permissions, and to upload п¬Ѓles you need to ensure that you have the necessary permissions.
NTP
The Network Time Protocol (NTP) is an Internet protocol that synchronizes the clock times of
computers in a network by exchanging time signals. It works on the Application layer of the
TCP/IP and OSI models. Synchronization is done to the millisecond against the U.S. Naval
Observatory master clocks. Running continuously in the background on a computer, NTP sends
periodic time requests to servers to obtain the server time stamp and then adjusts the clientвЂ™s
clock based on the server time stamp received.
Lesson 7: TCP/IP Services
237
Copyright В© Element K Corporation
LESSON 7
Figure 7-17: Clocks synchronized using NTP.
The master time clocks are located in Washington, D.C., and Colorado Springs, Colorado.
SMTP
TCP/IP has two services that operate in the Application layer of the OSI model and support
the sending and receiving of emailвЂ”Simple Mail Transfer Protocol (SMTP) and Post OffД±ce
Protocol version 3 (POP3).
SMTP is a communications protocol used to format and send email messages from a client to
a server or between servers. It uses a store-and-forward process. In SMTP, the sender starts the
transfer. SMTP can store a message until the receiving device comes online. At that point, it
contacts the device and hands off the message. If all devices are online, the message is sent
quickly. An SMTP message consists of a header and a content section. The header, or envelope, contains the delivery information of the message and uses a colon (:) as a separator
character. The content portion contains the message text, which is a sequence of ASCII characters.
Figure 7-18: Sending email messages using SMTP.
Using SMTP on Unreliable WAN Links
Because of SMTPвЂ™s store and forward capability, it is used to send data through unreliable WAN links if delivery time is not critical. Data is sent to the endpoint and
continues to hop from server to server until it eventually reaches its destination.
CompTIAВ® Network+В® (Exam N10-005)
238
Copyright В© Element K Corporation
LESSON 7
Limitations of SMTP
SMTP has a few limitations. The п¬Ѓrst one is related to the size of messages. Messages
that are more than 64 Kb cannot be handled by some older implementations. Another
limitation involves timeouts. If the client and server timeouts are different, one of the
systems may give up when the other is still busy, resulting in termination of the connection unexpectedly. Sometimes SMTP may also trigger inп¬Ѓnite mail storms.
For example, consider host 1 with Mailing List A containing a few entries and host 2
with Mailing List B containing both its own entries and that of Mailing List A. In such
a case, email sent to Mailing List A and copied to Mailing List B could trigger sending
multiple copies of the same email to the same set of recipients. Furthermore, if host 1
fails when mail is being forwarded, host 2 will try resending it to host 1. This generates a heavy amount of traffic on the network.
Extended SMTP (ESMTP) extends the capabilities of SMTP and helps to overcome
some of these limitations.
POP3
POP3 is a protocol used to retrieve email messages from a mailbox on a mail server. With
POP3, email messages wait in the mailbox on the server until the client retrieves them. The
client can start the transfer on a set schedule, or transfer messages manually. Once the client
retrieves and downloads the messages, the server deletes them unless the client conп¬Ѓgures
options to leave the messages on the server. The client then works with the locally cached
email messages.
Figure 7-19: Retrieving email message using POP3.
POP3 and Multiple Computers
Because POP3 is designed by default to download messages to the local computer and
delete them from the email server, it is not the best email protocol to use when users
need to access their email from multiple computers. This is because when they use
POP3, they end up with their email messages downloaded and split among the computers they use instead of having all their messages in one central location. Or, if they
leave their messages on the server, they will have to delete old messages manually to
avoid exceeding mailbox size limits, which may also lead to messages being split
across multiple computers.
Lesson 7: TCP/IP Services
239
Copyright В© Element K Corporation
LESSON 7
IMAP4
Internet Message Access Protocol version 4 (IMAP4) is a protocol used for retrieving messages
from a mail server. Though it is similar to POP3, IMAP4 is more powerful and offers several
functions. They include:
вЂў
A user can check an email header and also look for a speciп¬Ѓc string of characters in the
contents of an email before downloading it.
вЂў
Messages can also remain on the server while the client works with them as if they were
local.
вЂў
Users can search through messages by keywords, and to choose which messages to download locally.
вЂў
Messages in the userвЂ™s mailbox can be marked with different status п¬‚ags, such as deleted
or replied to. The messages and their status п¬‚ags stay in the mailbox until explicitly
removed by the user.
вЂў
An email message containing multimedia п¬Ѓles can be partially downloaded, saving bandwidth.
вЂў
A user can create, rename, or delete mailboxes on a mail server, and also arrange mailboxes in a hierarchical manner in a folder for email storage.
вЂў
Unlike POP3, IMAP4 enables users to access folders other than their mailbox.
Figure 7-20: Retrieving email messages using IMAP4.
Because IMAP4 is designed to store messages on the server, it is much easier for users to access their email
messagesвЂ”both new and savedвЂ”from multiple computers.
IMAP was developed at Stanford University in 1986.
NNTP
The Network News Transfer Protocol (NNTP) is a protocol used to post and retrieve messages
from the worldwide bulletin board system called USENET, which is a global bulletin board. It
contains more than 14,000 forums, called newsgroups. Users use newsgroups to post queries
relating to a particular topic. NNTP only submits and retrieves new or updated news articles
from the server. With NNTP, postings to newsgroups are stored in a database, from which individual users, called subscribers, can select only those items they wish to read. RSS feeds,
which allow users to subscribe to and receive updates made to web pages, are based on NNTP.
CompTIAВ® Network+В® (Exam N10-005)
240
Copyright В© Element K Corporation
LESSON 7
USENET is an acronym for UserвЂ™s Network.
HTTP
The HyperText Transfer Protocol (HTTP) is a network protocol that works on the Application
layer of the OSI and TCP/IP models. HTTP enables clients to interact with websites by allowing them to connect to and retrieve web pages from a server. It deп¬Ѓnes the format and
transmission of messages, as well as what actions web servers and clientвЂ™s browser should take
in response to different commands. A stateless protocol where each command executes independently of any prior commands, HTTP not only supports persistent connections to web
resources to reduce reconnection times, but also pipelining and buffering to help in the transfer
process.
Figure 7-21: Web clients using HTTP to access a website.
Because HTTP is stateless, it is difп¬Ѓcult to implement websites that react intelligently to user input. This limitation
can be overcome with a number of add-on technologies, such as ActiveX, Java, JavaScript, and cookies.
HTTPS
HTTP Secure (HTTPS) is a secure version of HTTP that provides a secure connection between
a web browser and a server. HTTPS uses the Secure Sockets Layer (SSL) security protocol to
encrypt data. Not all web browsers and servers support HTTPS, though.
Lesson 7: TCP/IP Services
241
Copyright В© Element K Corporation
LESSON 7
Figure 7-22: Websites that use HTTPS for secure transactions.
HTTPS is also referred to as HTTP over SSL.
ACTIVITY 7-8
Identifying Common TCP/IP Protocols
Scenario:
In this activity, you will identify common TCP/IP protocols.
1.
What are the differences between accessing email from multiple systems using IMAP4
and POP3?
a) POP3 does not maintain a copy of the email once it is downloaded from a mail server.
b) POP3 does not maintain a copy of the outgoing email.
c) Accessing email using POP3 is faster than IMAP4.
d) IMAP4 is the messaging protocol used to access email.
2.
Your sales department wants to sell supplies over the Internet and wants to make sure
that the transactions are secure. Which protocol should be configured on the web
server?
a) FTP
b) HTTPS
c) NNTP
d) SMTP
CompTIAВ® Network+В® (Exam N10-005)
242
Copyright В© Element K Corporation
LESSON 7
3.
Your company has a production floor with several shared computers. The production
staff needs to be able to check their email from whichever computer is free. Which
email protocol should you use?
a) POP3
b) NTP
c) IMAP4
d) NNTP
4.
True or False? NTP is a protocol that allows users to connect to a USENET system and
read newsgroup messages.
True
False
5.
Your sales force needs to retrieve sales prospective documents and upload completed
sales order forms to corporate headquarters while they are on the move. What service
should you use?
a) HTTP
b) NNTP
c) NTP
d) FTP
TOPIC E
TCP/IP Interoperability Services
In the previous topic, you identiп¬Ѓed various TCP/IP protocols. The TCP/IP protocol suite
includes services for the purpose of providing interoperability between dissimilar systems. In
this topic, you will identify the different TCP/IP interoperability services and the functions they
can provide on your network.
Networks are established so that individual devices can communicate with each other and
share resources. Most networks are made up of devices that are not natively compatible. When
these devices are running TCP/IP, you can use the interoperability services that run on TCP/IP
to create a network where dissimilar systems can securely communicate and share resources.
NFS
The Network File System (NFS) is a client/server application that enables users to access
shared п¬Ѓles stored on different types of computers, and work with the п¬Ѓles as if they were
stored locally. It also allows a user to share local п¬Ѓles and act as a п¬Ѓle server for other client
computers. The functioning of NFS is independent of the type of computer, operating system,
network architecture, and transport protocol on which it is deployed. Part of the TCP/IP protocol suite, NFS works on the Application layer of the OSI model and enables you to share
printers on the network.
Lesson 7: TCP/IP Services
243
Copyright В© Element K Corporation
LESSON 7
Figure 7-23: NFS on UNIX and Windows systems.
On TCP/IP networks, NFS uses an interface known as Virtual File System (VFS) that runs on TCP/IP.
SSH
Secure Shell (SSH) is a program that enables a user or an application to log on to another
computer over a network, execute commands, and manage п¬Ѓles. It creates a shell or session
with a remote system, and offers strong authentication methods and ensures that communications are secure over insecure channels. It replaces UNIX-based remote connection programs
that transmit unencrypted passwords. With the SSH slogin command, the login session,
including the password, is encrypted and protected against attacks. Secure Shell works with
many different operating systems, including Windows, UNIX, and Macintosh.
Figure 7-24: An SSH session that uses slogin.
SSH is a replacement for the UNIX-based rlogin command, which can also establish a connection with a
remote host, but transmits passwords in cleartext.
CompTIAВ® Network+В® (Exam N10-005)
244
Copyright В© Element K Corporation
LESSON 7
SSH1 and SSH2
There are two versions of Secure Shell available: SSH1 and SSH2. They are two different protocols and encrypt different parts of a data packet. To authenticate systems,
SSH1 employs user keys, to identify users; host keys, to identify systems; session
keys, to encrypt communication in a single session; and server keys, which are temporary keys that protect the session key. SSH2 is more secure; it does not use server
keys. SSH2 includes a secure replacement for FTP called Secure File Transfer Protocol (SFTP). Because they are different protocol implementations, SSH1 and SSH2 are
not compatible with each other.
Note that the acronym SFTP is used both for Secure File Transfer Protocol as well as for the now
obsolete Simple File Transfer Protocol.
Network Protection with SSH
All traffic (including passwords) are encrypted by SSH to eliminate connection hijacking, eavesdropping, and other network-level attacks, such as IP source routing, IP
spooп¬Ѓng, and DNS spooп¬Ѓng. When you implement SSH with encryption, any attacker
manages to gain access to your network can neither play back the traffic nor hijack the
connection. They can only force SSH to disconnect.
SCP
The Secure Copy Protocol (SCP) is a protocol that uses SSH to copy п¬Ѓles securely between a
local and a remote host, or between two remote hosts. SCP can also be implemented as a
command-line utility that uses either SCP or SFTP to perform secure copying.
Figure 7-25: SCP transfers using SSH.
Telnet
Telecommunications Network (Telnet) is a terminal emulation protocol that allows users at one
site to simulate a session on a remote host as if the terminal were directly attached. It performs
this simulation by translating keystrokes from the userвЂ™s terminal into instructions that the
remote host recognizes, and then carrying the output back and displaying it in a format native
to the userвЂ™s terminal. You can connect to any host that is running a Telnet daemon or service.
Connection-oriented, Telnet handles its own session negotiations and assists network administrators in remote administration such as connecting to a remote server or to a service such as
FTP.
Lesson 7: TCP/IP Services
245
Copyright В© Element K Corporation
LESSON 7
Figure 7-26: A Telnet session.
Telnet on Server Systems
Many systems, such as a UNIX host or an IBM mainframe running TCP/IP, include
Telnet daemons. There is also a Telnet server service in Windows XP and Windows
Server 2003. Telnet is not installed by default in Windows Server 2008 R2. Microsoft
provides directions for installing Telnet; you can view them by visiting the URL:
http://technet.microsoft.com/en-us/library/cc770501(WS.10).aspx
Windows Telnet Client
Windows includes a basic Telnet client utility. It is installed when you install TCP/IP
on your Windows system. It includes VT100, VT52, and TTY terminal emulation. It
does not include the Telnet daemon or service, but the Telnet service can be enabled
on Windows Server computers.
Telnet Defaults
Telnet is deп¬Ѓned in RFC 854, and uses the following defaults:
вЂў
Uses TCP Port 23; however, you can specify a different port if the host to which
you are connecting is conп¬Ѓgured to use a different port.
вЂў
Uses 25 lines in the buffer, but you can conп¬Ѓgure it for up to 399 lines.
вЂў
Uses Video Terminal 100 (VT100) as the default terminal emulation, but some
versions allow you to conп¬Ѓgure your system with VT220, VT52, and TeleTYpe
(TTY) terminal emulation support.
SMB
The Server Message Block (SMB) is a protocol that works on the Application layer and helps
share resources such as п¬Ѓles, printers, and serial ports among computers. In a TCP/IP network,
NetBIOS clients, such as Windows systems, use NetBIOS over TCP/IP to connect to servers,
and then issue SMB commands to complete tasks such as accessing shared п¬Ѓles and printers.
CompTIAВ® Network+В® (Exam N10-005)
246
Copyright В© Element K Corporation
LESSON 7
Figure 7-27: Resource sharing using SMB.
Samba
Samba is a well-known open-source product that uses SMB to enable UNIX and Windows machines for sharing directories and п¬Ѓles. Although the SMB protocol is
primarily used in Microsoft networks, there are products using SMB to facilitate п¬Ѓle
sharing across different operating system platforms.
LDAP
The Lightweight Directory Access Protocol (LDAP) is a protocol that deп¬Ѓnes how a client can
access information, perform operations, and share directory data on a server. It was designed
for use over TCP/IP networks in general, and on the Internet in particular. In most implementations, LDAP relies on DNS that enables clients to locate servers that host the LDAP directory,
and then the LDAP servers enable clients to п¬Ѓnd the directory objects.
Figure 7-28: LDAP on a network.
MicrosoftвЂ™s Active Directory directory service implements LDAP and supports LDAP versions 2 and 3. The Novell
directory services NDSВ® and eDirectoryв„ў and AppleвЂ™s Open Directory are also LDAP-compliant.
Lesson 7: TCP/IP Services
247
Copyright В© Element K Corporation
LESSON 7
Zeroconf
Zero Conп¬Ѓguration Networking (Zeroconf) is a set of standards that provides for automatic
conп¬Ѓguration and IP address allocation on both Ethernet and wireless networks. Used as alternatives, Zeroconf networks can exist without central control or conп¬Ѓguration services such as
DHCP or DNS. Protocols supporting Zeroconf can use conп¬Ѓguration information if available,
but do not require it. Zeroconf typically uses MAC addresses as parameters because they are
unique and available on most network devices.
Networks implementing Zeroconf must include methods for four functions:
вЂў
Network-layer address assignment.
вЂў
Automatic address assignment using multicast.
вЂў
Translation between network names and network addresses.
вЂў
Location or discovery of network services by name and protocol.
Universal Plug and Play (UPnP) is another technology that facilitates automatic conп¬Ѓguration and IP address allocation on networks.
Zeroconf Implementations
MicrosoftвЂ™s APIPA addressing and the Rendezvous product from Apple Inc., use
addresses in the 169.254.0.0 /16 address range for automatic conп¬Ѓguration. For more
information, visit www.zeroconf.org
ACTIVITY 7-9
Identifying TCP/IP Interoperability Services
Scenario:
In this activity, you will identify the TCP/IP interoperability services.
1.
Which service states what a client should do to access information, perform operations, and share directory data on a directory server?
a) Zeroconf
b) LDAP
c) SMB
d) NFS
2.
Which services work together to securely transfer computer files between a local and
a remote host, or between two remote hosts?
a) SMB and NFS
b) SCP and SSH
c) NFS and LDAP
d) NFS and SSH
CompTIAВ® Network+В® (Exam N10-005)
248
Copyright В© Element K Corporation
LESSON 7
3.
Which service enables users to access shared files stored on different types of computers?
a) NFS
b) SCP
c) LDAP
d) SSH
4.
Match the TCP/IP interoperability service with its description.
NFS
SSH
SMB
LDAP
a.
Enables sharing resources, such as
п¬Ѓles, printers, and serial ports,
between computers.
b. Enables users to access shared п¬Ѓles
stored on other computers and work
with them as if they are stored
locally.
c. States client actions to access information, perform operations, and share
directory data on a server.
d. Enables a user or an application to
run commands on a remote machine,
and transfer п¬Ѓles from one machine
to the other.
Lesson 7 Follow-up
In this lesson, you identiп¬Ѓed how you can use the services that are part of the TCP/IP protocol
suite on your network. By implementing the TCP/IP services and utilities that match your network, you will be able to manage the network and optimize its functionality.
1.
What TCP/IP services and utilities do you currently implement in your organization?
2.
Which TCP/IP command will you use commonly on your network?
Lesson 7: TCP/IP Services
249
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
250
Copyright В© Element K Corporation
LESSON 8
LESSON 8
Lesson Time
1 hour(s), 55 minutes
LAN Infrastructure
In this lesson, you will identify the components of a LAN implementation.
You will:
вЂў
Describe the functions of switches and switching technologies.
вЂў
Enable static routing.
вЂў
Implement dynamic IP routing.
вЂў
Identify the components and functionalities of a VLAN implementation.
вЂў
Plan a SOHO network.
Lesson 8: LAN Infrastructure
251
Copyright В© Element K Corporation
LESSON 8
Introduction
In the previous lessons, you have learned about components and technologies that can be used
on different networks. These technologies can be deployed both in LANs and WANs. In this
lesson, you will identify the components of a LAN implementation.
Any organization, however small it may be, will need to have its computers and resources
interconnected. LANs are the simplest and most common network type used to provide communication over a small area. Understanding LANs and the technologies that make them
functional will enable you to choose and implement the right type of LAN for your organization.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂў
вЂў
вЂў
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.4 Categorize WAN technology types and properties.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
3.4 Categorize WAN technology types and properties.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.4 Explain the purpose and properties of routing and switching.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
Topic D:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
Topic E:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.6 Given a set of requirements, plan and implement a basic SOHO network.
CompTIAВ® Network+В® (Exam N10-005)
252
Copyright В© Element K Corporation
LESSON 8
TOPIC A
Switching
In the previous lesson, you learned about the services of the TCP/IP protocol suite that can be
used on your network. Before you start setting up a network, you need to be aware of the
devices that you need on a network. In this topic, you will identify switching technologies and
the functions of switches.
Switches are fundamental network connectivity devices, so you are likely to encounter them in
the network environments that you support. In addition, switches provide features and functions that make them slightly more complex to implement and manage. Understanding the
capabilities of these devices will prepare you to support switching in your network environments.
Switches and Network Performance
Switches are designed to add functionality and increase performance on networks. The main
purpose of a switch is to optimize performance by providing users with higher bandwidth for
transmission. Switches inspect data packets as they receive them from a source device and forward packets only to the port of a destination device. The traffic between two devices can be
streamlined to allow the switch port and destination device to operate in the full duplex mode.
Because a switch forwards data directly to the intended destination, it signiп¬Ѓcantly increases
network performance. Broadcast transmissions, however, do not gain from the performance
advantages because they must be repeated on all other ports.
Figure 8-1: An eight-port switch connecting several devices.
Types of Switches
There are several types of switches available for your network.
Basic or traditional switches operate at the Data Link layer of the OSI model (Layer 2). However, modern
switches include more complex capabilities and can operate at the Network (Layer 3), and Transport layers (Layer
4). Higher layer switches are often called application or routing switches.
Lesson 8: LAN Infrastructure
253
Copyright В© Element K Corporation
LESSON 8
Switch Type
Description
Cut-through
A cut-through switch forwards a data packet as soon as it receives it; no error
checking or processing of the packet is performed. This switch performs the
address table lookup immediately upon receiving the destination address п¬Ѓeld in
the packet header. The п¬Ѓrst bits in a packet are sent out of the outbound port on a
switch immediately after it receives the bits. The switch does not discard packets
that are corrupt and fail error checking.
Fragment-free
A fragment-free switch scans the п¬Ѓrst 64 bytes of each packet for evidence of
damage by a collision. If no damage is found, it forwards the packet; otherwise, it
discards it. Thus a fragment-free switch reduces network congestion by discarding
fragments. It is similar to the cut-through switching method, but the switch waits
to receive 64 bytes before it forwards the п¬Ѓrst bytes of the outgoing packet.
Store-and-forward
A store-and-forward switch calculates the CRC value for the packetвЂ™s data and
compares it to the value included in the packet. If they match, the packet is forwarded. Otherwise, it is discarded. This is the slowest type of switch. The switch
receives the entire frame before the п¬Ѓrst bit of the frame is forwarded. This
allows the switch to inspect the Frame Check Sequence (FCS) before forwarding
the frame. FCS performs error checking on the trailer of an Ethernet frame.
Multilayer
A multilayer switch performs both routing and switching. This type of switch is
relatively new, and there is no industry standard to deп¬Ѓne what qualiп¬Ѓes as a
multilayer switch. A multilayer switch is also called a Layer 2 router, Layer 3
switch, IP switch, routing switch, switching router, and wirespeed router. But, the
term multilayer switch is the most prevalent.
Content
A content switch is used for load balancing among server groups and п¬Ѓrewalls,
and web cache and application redirection. Content switches are often referred to
as 4-7 switches as they primarily work on Layers 4 and 7 of the OSI model. They
make intelligent decisions about data by analyzing data packets in real time, and
understanding the criticality and type of the request.
Content switching supports load balancing for servers by directing traffic to
assigned server groups that perform the function. This increases the response time
for requests on the network. Although complex to implement, a content switch
can perform many critical functions on a network and increase throughput.
Circuit Switching Networks
Deп¬Ѓnition:
Switching is a technique used for transmitting information over a network to the destination network device. The two types of switching are circuit switching and packet
switching. In circuit switching, one end point creates a single path connection to
another, depending on the requirement. In circuit switching, the word вЂњcircuitвЂќ refers to
the connection path between endpoints. Once the circuit is established, data is transmitted through that path until the circuit is active. Bandwidth is dedicated to the
connection until it is not needed any more. There is no guarantee that data will be
transmitted through the same path through the network in different sessions.
CompTIAВ® Network+В® (Exam N10-005)
254
Copyright В© Element K Corporation
LESSON 8
Figure 8-2: Transfer of data in a circuit switching network.
Example: PSTN
PSTN is an example of a circuit switching network.
Packet Switching Networks
In packet switching networks, data to be transmitted is broken into small units known as packets that move in sequence through the network. Each packet takes the best route available at
any given time rather than following an established circuit path. Each data packet contains all
of the routing and sequencing information required to transmit it from one endpoint to another,
after which the data is reassembled. Packet switching assumes that a network is constantly
changing and adjustments need to be made to compensate for network congestion or broken
links.
Figure 8-3: Transfer of data in a packet switching network.
Streaming Media and Live Video
Packet switching is not the best choice for streaming media such as live video and
audio feeds. Because all packets do not necessarily arrive at the destination in order, or
soon after each other, time-sensitive applications can end up stuttering or delayed, or a
streaming connection may drop entirely.
Lesson 8: LAN Infrastructure
255
Copyright В© Element K Corporation
LESSON 8
Virtual Circuit Switching
Virtual circuit switching is a switching technique to transfer packets on logical circuits that do
not have physical resources, such as frequencies or time slots allocated. This technique merges
both packet and circuit switching techniques to its advantage. These logical paths are assigned
to identities rather than physical locations and can be either permanent or switched. Each of
the packets carries a Virtual Circuit Identiп¬Ѓer (VCI) that is local to a link and updated by each
switch on the path, from the source to the destination of the packet.
Figure 8-4: Packets flow in a virtual circuit using VCI.
There are two types of virtual circuits: Permanent Virtual Circuits (PVCs) and Switched Virtual
Circuits (SVCs).
Virtual Circuit Type
Description
Permanent
PVCs are usually associated with leased lines. They connect two endpoints and
are always on, which is why they are referred to as permanent. When a PVC is
established, it is manually built and maintained by a telephone company (telco).
The telco identiп¬Ѓes the endpoints with a Data Link Connection Identiп¬Ѓer
(DLCI). PVCs provide a fast, reliable connection between endpoints because the
connection is always on. Customers pay a п¬Ѓxed monthly fee per connection.
Switched
SVCs are associated with dial-up connections. SVCs provide more п¬‚exibility
than PVCs and allow a single connection to an endpoint to be connected to multiple endpoints as needed. When a network device attempts to connect to a
WAN, an SVC is requested and the carrier establishes the connection. Customers
typically pay by connection time (like a long-distance phone call) and the
monthly charge is less than that of a PVC. SVCs are useful when you need a
part-time connection. But keep in mind that connection time can be slow, and if
usage increases, so can an SVCвЂ™s cost.
Cell Switching Networks
Cell switching networks are very similar to packet switching networks except that data is transmitted as п¬Ѓxed-length cells instead of variable-length packets. If data does not п¬Ѓll up an entire
cell, the remainder of the space is п¬Ѓlled with blank or п¬Ѓller data until the cell reaches its п¬Ѓxed
size. The advantage of cell switching over packet switching is its predictability. Cell switching
technologies make it easy to track how much data is moving on a network.
CompTIAВ® Network+В® (Exam N10-005)
256
Copyright В© Element K Corporation
LESSON 8
Figure 8-5: Cell switching uses fixed-length cells instead of variable-length packets.
ACTIVITY 8-1
Describing Switching
Scenario:
In this activity, you will identify switches and switching technologies.
1.
Match the switch type with its description.
Store-and-forward
Multilayer
Content
2.
a.
Performs both routing and switching
functions.
b. Performs load balancing among
server groups.
c. Calculates CRC for data and compares it to the value in the packet.
True or False? The difference between cell switching and packet switching networks is
that in cell switching data is divided into fixed-length packets.
True
False
3.
In which type of switching is a single path from one endpoint to another built when a
connection is needed?
a) Cell
b) Circuit
c) Packet
Lesson 8: LAN Infrastructure
257
Copyright В© Element K Corporation
LESSON 8
4.
Which switching techniques use the same path for all data traffic between two
endpoints in a single session?
a) Packet
b) Circuit
c) Virtual circuit
d) Cell
TOPIC B
Enable Static Routing
In the previous topic, you identiп¬Ѓed switches and their role in networks. Switches function
well in many networking situations, but in most large TCP/IP networks, you will need the
advanced traffic-control capabilities of a router. In this topic, you will identify the components
of a static IP routing implementation.
It is not enough to just know how millions of networks across the globe connect to form a
single network. You should also know how these interconnected networks talk to each other,
share data, and how information is transferred from a source to a destination almost instantaneously. Because routers are the workhorses of all internetworks, including the Internet, you
will need to understand routing basics no matter what kind of network you support.
Routing
Deп¬Ѓnition:
Routing is the process of selecting the best route for transferring a packet from a
source to its destination on a network. A router applies appropriate algorithms to generate and maintain an information base about network paths. It considers various routing
metrics such as the bandwidth and reliability of the path, and communication costs
while evaluating available network paths to determine the optimal route for forwarding
a packet. Once the optimal route for a packet is assigned, packet switching is done to
transport the packet from the source host to a destination host.
CompTIAВ® Network+В® (Exam N10-005)
258
Copyright В© Element K Corporation
LESSON 8
Example:
Figure 8-6: A router selects the best path for transferring packets.
Route
Route is the path used by data packets to reach the speciп¬Ѓed destination using the gateway as the next hop. Routes are added in the routing table that store information about
connected and remote networks. Connected networks are directly attached to one of
the routerвЂ™s interfaces, which are the gateways for the hosts on different local networks. Because remote networks are not directly connected to the router, routes to
these networks must be manually conп¬Ѓgured on the router by the network administrator or set automatically using dynamic routing protocols.
Software-Based Routing in Windows Server
Although not as common as hardware-based routers, Windows ServerВ® computers with
two or more NICs installed can use the Routing and Remote Access software to function as routers. For testing purposes, instead of installing two NICs, you can install a
software-based interface called the MicrosoftВ® Loopback Adapter on your Windows
system, which can simulate the presence of an additional NIC.
Static Routing
Static routing uses table mappings that the network administrator established manually in the
router prior to routing. Static route mappings do not change unless the network administrator
alters them. Static routes remain in a routing table, and traffic is forwarded regardless of
whether the destination is active or inactive.
Lesson 8: LAN Infrastructure
259
Copyright В© Element K Corporation
LESSON 8
Figure 8-7: Static routes can be altered only by a network administrator.
Types of Routers
Routers can be classiп¬Ѓed into three main categories: access, distribution, and core.
Router Type
Description
Access routers
Routers used in SOHO networks. They are located at customer sites and are
inexpensive.
Distribution routers
Routers that collect data from multiple access routers and redistribute them to
an enterprise location such as a companyвЂ™s headquarters. The routing capabilities of a distribution router are greater than those of access routers.
Core routers
Core routers are located at the center of network backbones. They are used to
connect multiple distribution routers located in different buildings to the backbone.
Routers vs. Switches
When computers communicate with different networks through switches, they are limited to
adjacent networks because switches use the MAC address of a device to locate it. Routers, on
the other hand, are designed to interconnect multiple networks and support connectivity to distant networks. They use a map of the network to make decisions on where to forward data
packets. Routers primarily determine the next hop for data. Another advantage that a router has
over a switch is that it can read the port number and determine not only the dataвЂ™s destination
using the IP address but also what kind of data it is transmitting. Broadcasts can either be forwarded or dumped based on the settings of the router.
CompTIAВ® Network+В® (Exam N10-005)
260
Copyright В© Element K Corporation
LESSON 8
Unmanaged vs. Managed Switches
Unmanaged switches are devices that perform switching without user intervention. In
other words, the functions of an unmanaged switch cannot be controlled. On the other
hand, a managed switch provides complete control over how the device functions. It
has its own IP address and a web interface through which the conп¬Ѓgurations can be
managed. Managed switches allow users to create VLANs within the network.
Routing Tables
Deп¬Ѓnition:
A routing table is a database created manually or by a route-discovery protocol that
contains network addresses as perceived by a speciп¬Ѓc router. Routers refer to this table
to determine where to forward packets. If a router attached to four networks receives a
packet from one of them, it would have to determine which of the three other networks is the best route to transfer the packet to its destination. Each router uses its
routing table to forward a packet to another network or router until the packet reaches
its destination. The action of forwarding a packet from one router to the next is called
a hop. You can specify the number of hops packets can take from a sender to a
receiver.
Example:
Figure 8-8: A routing table.
Route Cost
The number of hops along a route between two networks constitutes that routeвЂ™s cost.
However, a cost can also consist of other speciп¬Ѓcations such as the transmission speed.
Typically, a router maintains the most cost-effective route in its table.
Static Routing Tables
Static routing tables are manually conп¬Ѓgured on a router. They are easy to set up and
are sometimes used on a small network. Also, as long as a network is relatively
unchanging, static routing tables are ideal for an extranet where the border router of an
Autonomous System (AS) is pointed toward the border router of an external network.
The advantage of static routing is that it does not cause additional network traffic by
sending routing table updates to other routers. It provides extra security from other
systemsвЂ™ rogue routers sending information to the AS routers. Also, the routing table
can be conп¬Ѓgured to cover only the necessary portion of the network. That way, the
router does not expend resources for maintaining its routing table.
Lesson 8: LAN Infrastructure
261
Copyright В© Element K Corporation
LESSON 8
The biggest disadvantage of static routing tables is that it requires manual maintenance. Network changes need to be updated manually on all routers affected by the
change. Because of this, static routing is prone to conп¬Ѓguration errors, and is less efficient than dynamic routing. However, if using static routing tables, it is crucial to
maintain detailed documentation.
Routing Table Entries
Routing table entries fall into four general categories:
вЂў
Direct network routes, for subnets to which the router is directly attached.
вЂў
Remote network routes, for subnets that are not directly attached.
вЂў
Host routes, for routes to a speciп¬Ѓc IP address.
вЂў
Default routes, which are used when a better network or host route is not found.
Figure 8-9: A routing table with entries.
All IP host computers have a routing table with default entries so that the host can deliver
packets to common destinations.
Entry
Description
Default gateway (destination: 0.0.0.0)
The default gateway entry appears if the local host has been conп¬Ѓgured with
a default gateway address.
Local loopback (destina- The local loopback entry provides a delivery route for packets addressed to
tion: 127.0.0.1)
the local loopback address (127.0.0.1).
Local subnet (destination: network portion of
local IP address plus
host address of all 0)
The local subnet entry identiп¬Ѓes the route to the local network. An example
of a destination address can be 140.125.0.0.
Network interface (destination: local IP
address)
The network interface entry identiп¬Ѓes the route to the hostвЂ™s local network
card. An example of a destination address can be 140.125.10.25.
Subnet broadcast
address (destination:
network portion of local
IP address plus host
address of all .255)
The subnet broadcast entry identiп¬Ѓes the route for broadcasts on the local
subnet. An example of a destination address can be 140.125.255.255.
CompTIAВ® Network+В® (Exam N10-005)
262
Copyright В© Element K Corporation
LESSON 8
Entry
Description
Multicast broadcast
address (destination:
224.0.0.0)
The multicast broadcast entry identiп¬Ѓes the address for sending multicast
transmissions.
Internetwork broadcast
address (destination:
255.255.255.255)
The internetwork broadcast entry identiп¬Ѓes the route for broadcasts to the
entire network. However, most routers will not pass these broadcasts.
When reading routing tables, it can be helpful to think of each row as a single routing table entry, and each column as a characteristic of that route.
Routing Entry Components
Routing entries are entries in routing tables that provide routing information to a router. There
are several components to each entry in a routing table.
Figure 8-10: Components of a routing table entry.
Routing Entry
Component
Description
Network destination or network
address
The destination п¬Ѓeld contains the network ID of a destination address and is the
search point when processing the routing table. It can be listed as a complete
address, but the router will be more efficient if destination entries are listed as network IDs. This way, only one entry is added to the routing table for an entire
subnet, no matter how many nodes are on it.
Network mask
A network mask is speciп¬Ѓc to a routing entry. It determines to what extent does a
packetвЂ™s destination address need to match the network destination п¬Ѓeld of a routing
entry before that route is used to deliver the packet.
Gateway
The gateway п¬Ѓeld indicates the address to which the packet is delivered on its п¬Ѓrst
hop. It can be the local loopback address, a local IP address, the hostвЂ™s own default
gateway address, or the address of an adjacent router.
Interface
The interface is the IP address of the local port that a host uses to send data. Once
a destination entry is found, data is sent to the interface entry listed in the same line
as the destination.
Metric
A metric is the cost of the route, and it is determined by the number of hops. The
metric is used to determine which route to use when there are multiple routes to a
destination.
Lesson 8: LAN Infrastructure
263
Copyright В© Element K Corporation
LESSON 8
The route Command
Routes to destinations that are not in the default routing table must be added manually. On
Windows Server 2008 R2, you can use the route command to manage the static routing
table.
Command
Used To
route print
Display the routing table entries.
route add
Add static entries.
route delete
Remove static entries.
route change
Modify an existing route.
route -p
Make the speciп¬Ѓed route persistent across reboots, when used in conjunction
with the add command.
route -f
Clear a routing table off all entries.
The Routing Process
There are three steps in the routing process:
1. A router receives data, reads its destination IP address and tries to п¬Ѓnd the shortest path to
the destination.
2.
The router reads its routing table, which lists the locations of other routers on the network.
3.
Once it decides on a route, it removes the old destination MAC address and attaches the
MAC address of the next hop in the dataвЂ™s path. The packetвЂ™s ultimate destination IP
address never changes. By enabling the router to change the MAC address, the data
moves through multiple local networks.
Figure 8-11: Steps in the routing process.
CompTIAВ® Network+В® (Exam N10-005)
264
Copyright В© Element K Corporation
LESSON 8
Autonomous Systems
Deп¬Ѓnition:
An Autonomous System (AS) or a routing domain is a self-contained network or group
of networks governed by a single administration. All the routers in an AS share and
conform to a single routing policy. An AS can connect to other networks or other
autonomous systems, but does not share routing information outside of the AS. Each
AS has a unique identiп¬Ѓcation number assigned by the IANA. Depending on whether
routing takes place within an autonomous system or among different autonomous systems, it is referred to as intra-domain routing or inter-domain routing. Each
autonomous system may choose different routing algorithms for intra-domain routing,
but only one algorithm can be used for inter-domain routing.
Example:
Company AвЂ™s routers are owned, conп¬Ѓgured, and managed by the company itself. Each
router in Company A is address-aware within the network that it serves as well as of
the best output interface (port).
Example:
Figure 8-12: Routing in an autonomous system.
Classiп¬Ѓcation of Autonomous Systems
Autonomous systems can be classiп¬Ѓed as transit and stub autonomous systems.
Autonomous System Description
Transit
The source or destination node does not reside within an autonomous
system. The autonomous system allows the traffic to reach another network. ISPs are examples of transit autonomous systems.
Stub
Either the source node or destination node must exist within an
autonomous system. The stub autonomous system does not allow transit traffic.
Lesson 8: LAN Infrastructure
265
Copyright В© Element K Corporation
LESSON 8
Router Roles in Autonomous Systems
Routers can play three different roles in autonomous systems.
Figure 8-13: Router roles in an autonomous system.
Router Role
Description
Interior router
Interior routers are arranged inside an AS and the AS administrator controls them. All
interfaces on an interior router connect to subnets inside the AS. Interior routers do not
provide connections to external networks.
Exterior
router
Exterior routers are entirely outside of an AS. These routers only matter to the AS if
they handle data from the AS. Routers that operate on the Internet backbone are exterior
routers.
Border router
Border routers are situated on the edge of an AS. They have one or more interfaces
inside the AS and one or more interfaces that provide a connection to remote networks.
Border routers are usually managed by the administrator of an AS and can be placed
between two private networks or between a private network and its ISP to direct
requests to the Internet.
IGP vs. EGP
Interior Gateway Protocol (IGP), as the name suggests, is the protocol responsible for
exchanging routing information between gateways within an AS. In contrast, Exterior
Gateway Protocol (EGP) exchanges routing information between two neighboring
gateways. EGP can also utilize IGP to resolve a route within the AS.
Routing Methods in Autonomous Systems
There are different methods for routing inside an autonomous system, between adjacent networks, and between distant networks.
CompTIAВ® Network+В® (Exam N10-005)
266
Copyright В© Element K Corporation
LESSON 8
Routing Method
Description
Inside an autonomous system
When routing inside an autonomous network, data transmission begins at a
workstation and does not leave the AS. That means that when any node
sends data, it can send it only to a node on the same local network. Nodes
use ARP to obtain the local destinationвЂ™s MAC address.
When a node needs to send data to a remote network, it sends it to the IP
address conп¬Ѓgured as the nodeвЂ™s default gateway. When a node sends data
to an address on its own subnet, it sends it directly to the address. When a
node needs to send data to a node anywhere inside the AS, all routers in
the AS should be aware of the path to the destination node.
Between adjacent networks
Adjacent networks share border routers, and because any router inside an
AS knows a direct path to the adjacent network, it knows how to deliver
data to the correct border router. That border router then passes the data on
to the appropriate network. This conп¬Ѓguration gives an AS a single point
of contact between adjacent networks.
Between distant networks
Distant networks are not directly aware of the location of a destination
network. You have accessed a distant network if you have sent a request to
the Internet for a web page. An AS router cannot know all of the details in
the path to a website. In this situation, the routers send the data to a
default gateway. If the router serving as the default gateway does not
know the destination, it transmits the packet to its own default gateway.
Data moves from default gateway to default gateway until it either reaches
a router that knows a route to the destination, or the TTL expires and the
packet expires on the network.
How to Conп¬Ѓgure Routing and Remote Access
Procedure Reference: Conп¬Ѓgure Routing and Remote Access
To conп¬Ѓgure routing and remote access:
1.
Choose Startв†’All Programsв†’Administrative Toolsв†’Server Manager.
2.
In the Server Manager window, under Roles, add the role Network Policy and
Access Services.
3.
From the Roles Service list, check the Routing and Remote Access Services
check box and install the role.
4.
In the Server Manager window, expand Rolesв†’Network Policy and Access Services.
5.
In the Routing and Remote Access Server Setup Wizard, set the required routing and remote access settings.
6.
Close the Server Manager window.
Lesson 8: LAN Infrastructure
267
Copyright В© Element K Corporation
LESSON 8
ACTIVITY 8-2
Enabling Static Routing
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
You work for a startup that plans to implement software-based routing by using Windows
Server 2008 R2 routing features. You are going to test a router in a lab environment to simulate the production router. You need to enable routing on the server that you will be testing.
What You Do
How You Do It
1.
a. Choose Startв†’All Programsв†’
Administrative Toolsв†’Server Manager.
Enable routing and remote access.
b. In the Server Manager window, right-click
Roles and choose Add Roles.
c. In the Add Roles Wizard, click Next.
d. In the Roles list, check the Network
Policy and Access Services check box and
click Next.
e. On the Network Policy and Access Services page, click Next.
f.
On the Select Role Services page, in the
Role services list, check the Routing and
Remote Access Services check box and
click Next.
g. Click Install and then click Close.
CompTIAВ® Network+В® (Exam N10-005)
268
Copyright В© Element K Corporation
LESSON 8
2.
Verify that routing and remote access
is enabled.
a. In the Server Manager window, in the left
pane, expand Rolesв†’Network Policy and
Access Services and select Routing and
Remote Access.
b. Choose Actionв†’Configure and Enable
Routing and Remote Access.
c. In the Routing and Remote Access Server
Setup Wizard, click Next.
d. Verify that the Remote access (dial-up or
VPN) option is selected and click Next.
e. Check the VPN check box and click Next.
f.
From the Network interfaces list, select
the Loopback Adapter option and click
Next.
g. Verify that the Automatically option is
selected, and click Next to assign IP
addresses automatically to remote clients.
h. Verify that the No, use Routing and
Remote Access to authenticate connection requests option is selected and click
Next.
i.
Click Finish and if necessary, click OK.
j.
Observe that the Routing and Remote
Access service has been enabled, indicated by the green upward pointing arrow
next to the Routing and Remote Access
object on the left pane. Close the Server
Manager window.
Lesson 8: LAN Infrastructure
269
Copyright В© Element K Corporation
LESSON 8
DISCOVERY ACTIVITY 8-3
Identifying Routing Entries
Scenario:
You want to identify the default routing entries on the Windows Server 2008 R2 computer that
you have enabled as a router. Refer to the IPv4 route table shown below to complete this
activity.
1.
Which route determines the destination for packets to the 172.16.0.0 network? What
adapter will they be delivered to?
2.
Which interfaces will receive internetwork broadcasts?
3.
Why is there no route to the 0.0.0.0 network destination on the 172.16.0.1 interface?
4.
If you wanted packets to a specific network to be routed to the 172.16.0.1 network
interface instead of to the default gateway, what would you do?
CompTIAВ® Network+В® (Exam N10-005)
270
Copyright В© Element K Corporation
LESSON 8
TOPIC C
Implement Dynamic IP Routing
In the previous topic, you identiп¬Ѓed the components of a static routing implementation. Routing can also be implemented dynamically. In this topic, you will implement dynamic routing.
Dynamic routing, like dynamic IP addressing, is the technology of choice in larger network
environments. As a network professional, you should understand dynamic routing technologies
and how you can implement them so that you can support routed environments of all sizes and
types. This will ensure that each device is properly identiп¬Ѓed on the network.
Dynamic Routing
Routers that support dynamic routing perform route discovery operations to build and update
routing tables themselves using specially designed software. Routers transmit data to adjacent
routers providing information about the networks they are currently connected to and networks
they can reach. In the dynamic routing process, routing entries are dynamically created.
Dynamically built routing tables can show a more accurate picture of a network as it is
updated more often than static tables because the routers, and not the administrator, update the
tables. If the network suffers traffic congestion or device failures, a router running dynamic
routing protocols can automatically detect the problem and calculate a different routing path.
This feature is a huge advantage on large networks with many routers or multiple paths to
each endpoint.
Static Routing vs. Dynamic Routing
In static routing, routing entries are created manually in conп¬Ѓguration п¬Ѓles. This п¬Ѓle is
loaded when the router starts. Static routing is used when there are fewer devices on
the network. Dynamic routing uses special software designed for routing devices. This
software automatically creates routing entries for the router to connect all devices on
the network.
Distance-Vector Routing
In distance-vector routing, each router passes a copy of its routing table to its neighbors. It
also maintains a table of minimum distances to every node. The neighbor adds the route to its
own table, incrementing the metric to reп¬‚ect the extra distance to the end network. The distance is given as a hop count; the vector component speciп¬Ѓes the address of the next hop.
When a router has two routes to the same network, it selects the one with the lowest metric,
assuming that it is faster to route through fewer hops. Routing Information Protocol (RIP)
implements distance-vector routing.
Lesson 8: LAN Infrastructure
271
Copyright В© Element K Corporation
LESSON 8
Figure 8-14: Routers maintain a table of minimum costs.
Distance-vector protocols use the Bellman-Ford algorithm to calculate route paths.
Link State Routing
Link state routing п¬‚oods routing information to all routers within a network. It attempts to
build and maintain a more complex route database with more information about the network.
Routers can exchange information about a route, such as its quality, bandwidth, and availability. This way, the routers can make a decision about sending data through the network based
on more information than just the hop count.
Link state algorithms broadcast small updates and converge quickly, a feature that makes them
less prone to routing loops. However, link state algorithms are more expensive to implement
because they require more power and memory. The Open Shortest Path First (OSPF) protocol
implements link -state routing.
Link State vs. Distance-Vector Routing
To understand the difference between link state and distance-vector routing, consider a
situation in which a single dial-up connection or two separate T1 links can deliver a
packet. Distance-vector prefers dial-up based on the hop count alone; link-state prefers
the two-hop route through the higher bandwidth connection. Also, link state is more
complicated to set up and maintain than distance-vector. An administrator has to conп¬Ѓgure more information about the routersвЂ™ local routes. However, link state routers are
a must in situations with multiple routes through different types of connections, such
as border routers.
Distance-Vector vs. Hybrid Routing
Distance-vector routing uses hop counts and routing table updates to prevent routing
loops. They also alert neighboring routers about broken routing paths. Hybrid routing
uses both distance-vector and link state routing methods. In hybrid routing, various
factors such as the link cost and network bandwidth are considered before deciding
upon the best route.
CompTIAВ® Network+В® (Exam N10-005)
272
Copyright В© Element K Corporation
LESSON 8
Path-Vector Routing
Path-vector routing is used in inter-domain routing, and a router keeps track of the route from
itself to the destination. However, rather than recording every individual node, path-vector
routing can treat entire autonomous systems as nodes. As the AS border or exterior routers
pass routing information from one to the next, each adds its presence to the path and forwards
the route to the next autonomous system in the chain. If the destination address is within an
AS, the border router passes the packet on to interior routers.
Figure 8-15: The path vector routing table of different autonomous systems.
Path-vector routing is enhanced by its inclusion of routing policies, which are implemented by
administrators to enable routers to react to situations such as network congestion, offline nodes,
and potentially duplicate routes. Path-vector routing has roots in distance-vector routing, but
was designed to scale up to much larger networks. The Border Gateway Protocol (BGP)
implements path vector routing.
Route Convergence
In dynamic routing, when the network topology or conditions change, each router must п¬Ѓrst
learn of the change and then calculate the effect and update its routing tables. Route convergence is the period of time between a network change and the router updates to reach a steady
state once again. During route convergence, data delivery can be unreliable as the routing table
may not be updated with the route information.
Lesson 8: LAN Infrastructure
273
Copyright В© Element K Corporation
LESSON 8
Figure 8-16: A router changes the route when a part of the network becomes
unreachable.
Routing Loops
Deп¬Ѓnition:
A routing loop is a routing process in which two routers discover different routes to
the same location that include each other, but have incorrect information and thereby
never reach the endpoint. Data caught in a routing loop circles around until its TTL
expires. Routing loops can be difficult to detect and to troubleshoot; the best prevention is proper router conп¬Ѓguration.
Figure 8-17: A routing loop created between routers B and C.
Example: Routers in a Loop
For example, Routers A, B, and C are connected in a line. When the link between A
and B goes down, it prompts B to update its routing table. But, this update does not
reach C on time, and it sends its regular update to B. This leads B to assume that C
has found an alternate path to reach A. An endless loop is created because B tries to
send packets addressed to A via C, which redirects the packets to B. This routing loop
continues until the TTL of the data expires.
CompTIAВ® Network+В® (Exam N10-005)
274
Copyright В© Element K Corporation
LESSON 8
Count-to-Inп¬Ѓnity Loops
Deп¬Ѓnition:
A count-to-inп¬Ѓnity loop can occur when a router or network goes down and one of the
other routers does not realize that it can no longer reach the route. This loop results in
the remaining routers broadcasting incorrect information and updating each otherвЂ™s
routing tables to create an endless cycle of hop count recalculation. This cycle continues to inп¬Ѓnity, which is conп¬Ѓgured as 16 hops in most routing implementations.
Example: Routers in a Count-to Inп¬Ѓnity Loop
A network contains four routers that connect п¬Ѓve networks. In calculating the cost to
network E, router 3 п¬Ѓgures its cost to be one hop, router 2 п¬Ѓgures two hops, and router
1 п¬Ѓgures three hops. If router 4 fails, router 3 must recalculate its routing table using
information from other routers. However, router 3 still thinks that it can reach network
E, and uses information advertised from router 2 to calculate its table.
According to router 2, network E is still two hops away, so router 3 broadcasts that its
cost to network E is three hops. Router 1 receives the new information from router 3,
updates its table, and then broadcasts this information. Router B also recalculates
accordingly and the inп¬Ѓnite loop continues.
Split Horizon and Poison Reverse
One workaround to the count-to-inп¬Ѓnity problem is the split horizon method, where a
router does not include any routes to the router from which it discovered its own location in its broadcasts.
Another workaround to the count-to-inп¬Ѓnity problem is called a poison reverse. Unlike
in split horizon, routers using poison reverse broadcast routes back to the router from
which they calculated their location, but instead of giving a true hop count, to discourage use of the route, the router broadcasts a hop count of 16, as a warning not to use
the value speciп¬Ѓed and as an intimation that the route was learned from router 1.
Split horizon and poison reverse are not used together. Split horizon is enabled when
poison reverse is disabled, and vice versa.
Router Discovery Protocols
Router discovery protocols are used to identify routers on the network.
Protocol
Description
RIP
RIP is a distance-vector routing protocol that is easy to conп¬Ѓgure, works well inside
simple autonomous systems, and is best deployed in small networks with a fewer numbers of routers and in a non-dynamic environment. Most equipment that supports RIP is
lower in cost than that that supports more complicated router discovery protocols. RIP
broadcasts the entire routing table, including known routes and costs, every 30 seconds.
This places a lot of router discovery traffic on the network.
When RIP builds its routing table, it does not take into account network congestion or
link speed and does not support multiple routes to the same network. A router records
the route with the lowest metric to a location and removes the others. RIP is very
stable, but convergence is slow. RIP is prone to count-to-inп¬Ѓnity loops and does not
support many of the new features expected on modern networks such as multicast
addressing or VLSMs. RIP has been replaced with RIP version 2 (RIP v2).
Lesson 8: LAN Infrastructure
275
Copyright В© Element K Corporation
LESSON 8
Protocol
Description
RIP v2
RIP v2 enhances RIP by supporting the following features:
вЂў Next Hop Addressing:Includes IP address information in routing tables for every
router in a given path to avoid sending packets using additional routers.
вЂў Authentication:Enables password authentication and the use of a key to authenticate
routing information to a router.
вЂў Subnet mask:Supports additional subnets and hosts on an internetwork by supporting VLSMs and including length information along with the routing information.
вЂў Multicast addressing:Decreases the workload of nonвЂ“RIP v2 hosts by communicating only with RIP v2 routers. RIP v2 packets use 224.0.0.9 as their IP multicast
address.
Most hosts and routers support RIP, so ensure that the RIP v2 mode you conп¬Ѓgure
works with your current RIP conп¬Ѓguration.
BGP
BGP is a path-vector routing protocol used to establish routing between ISPs. BGP is
the routing protocol used to connect Internet backbones. BGP maintains a table of IP
networks among autonomous systems. BGP was created as a fully decentralized routing
protocol to replace EGP in order to decentralize the Internet. The current version since
1994 is BGP v4.
Although BGP was created to replace EGP, BGP is considered an interautonomous routing protocol. When it is used to route information between ASs, it is called External
BGP (EBGP), but when EGP is used to route information within an AS, it is referred to
as Internal BGP (IBGP).
IGRP
Interior Gateway Routing Protocol (IGRP) is a distance-vector routing protocol developed by CiscoВ® as an improvement over RIP and RIP v2. It was designed to be
deployed on interior routers within an AS. IGRP introduced a composite metric,
enabling an administrator to manually conп¬Ѓgure and add to the hop count up to six metric values to give extra value to the metric. Because of this, IGRP can support multiple
routes to the same network and can even support load balancing across routes with
identical metrics.
EIGRP
Enhanced Interior Gateway Routing Protocol (EIGRP) is a proprietary routing protocol
by Cisco and considered a hybrid protocol. It includes features that support VLSM and
classful and classless subnet masks. Additional updates reduce convergence times and
improve network stability during changes. To ensure that EIGRP is a viable solution for
interior routing, EIGRP removed routing protocol dependence on the network protocol.
This means that routing tables can be built for several different protocolsвЂ”even protocols that have not been fully deployed yet, such as IPv6.
OSPF
On IP internetworks, link-state routing is usually accomplished by the OSPF protocol.
Each OSPF router uses the information in its database to build the shortest possible path
to destinations on the internetwork. Although OSPF uses less bandwidth than distancevector protocols, it requires more memory and CPU resources. OSPF uses DijkstraвЂ™s
algorithm for computing the best path through a network.
IS-IS
Intermediate System to Intermediate System (IS-IS) is a link-state routing protocol that is
natively an ISO network layer protocol. IS-IS is similar to OSPF (they both use
DijkstraвЂ™s algorithm) but IS-IS is able to support more routers than OSPF and does not
support only a speciп¬Ѓc type of network address. This made IS-IS easily adaptable to
support IPv6.
For more information on RIP v2, see RFC 1387 вЂњRIP Version 2 Protocol Analysis.вЂќ You might also be interested
in RFCs 1388 and 1389 for RIP II information.
CompTIAВ® Network+В® (Exam N10-005)
276
Copyright В© Element K Corporation
LESSON 8
RIP vs. OSPF
There are differences in characteristics of RIP and OSPF.
Characteristic
RIP
OSPF
Size of metric
16вЂ”This means that a RIP network cannot be larger than 16
hops. This maximum is further
reduced when costs other than 1
are used for certain routes.
Limited only by the number of bits
in the metric п¬Ѓeld (64,000). Because
OSPF does not suffer from the countto-inп¬Ѓnity problem, it can be the
basis for much larger internetworks,
and administrators can assign costs to
optimize routing without limiting the
size of the network.
Maximum number
of routers
15вЂ”This value is related to the
allowable metric size.
65,535. This value is related to the
allowable metric size.
Variable-length
subnets
Only with RIP v2; RIP treats
subnets as part of the internal
structure of the network and
assumes that all subnets are of
equal length. With RIP, all subnets
must be contiguous, connected,
and hidden from remote networks.
Supported by default; Because OSPF
treats the subnet mask as part of the
protocol information, the restrictions
that affect RIP do not apply.
Convergence
Poison reverse or split horizon
must be used to counteract the
count-to-inп¬Ѓnity problem. RIP
must calculate all routes before
broadcasting the information.
Link State Acknowledgements
(LSAs) provide rapid convergence
among tables; no count-to-inп¬Ѓnity
problem arises. OSPF passes along
LSAs as soon as they are received,
meaning that nodes can adjust their
routing tables at practically the same
time.
Broadcast Traffic
The entire routing table is broadcast every 30 seconds.
A partial routing table (Hello packet)
is broadcast only to direct connections every 30 minutes.
STP
The Spanning-Tree Protocol (STP) is a Layer 2 protocol that is used for routing and prevents
network loops by adopting a dynamic routing method. A network loop can occur when you
have multiple switches on a network, and connect them to each other using different ports.
STP establishes routes on the network by creating virtual circuits. It helps switches achieve a
loop-free path by determining the ports that should be forwarding data and the ports that
should be blocked to create a single loop-free path. The switch then switches frames from one
port to another through the identiп¬Ѓed path.
In a hierarchical tree network, a root node can communicate with lower level nodes only in a
linear path. In case any node fails on the path, the lower level nodes become inaccessible. STP
establishes a cross-linked structure between different branches of the hierarchical network thus
providing shorter paths and higher link redundancy.
Lesson 8: LAN Infrastructure
277
Copyright В© Element K Corporation
LESSON 8
Figure 8-18: A loop-free path created by STP.
CARP
Common Address Redundancy Protocol (CARP) allows a number of computers to be grouped
together to use a single virtual network interface between them. One of the computers acts as
the master and it responds to all packets sent to that virtual interface address. All of the other
computers just act as hot spares. If the master computer fails, one of the spares would immediately take over with virtually no downtime. It is also possible to have two different CARP
groups using the same IP address. This allows for the load balancing of any traffic destined for
that IP. The spreading of the load improves network performance.
ACTIVITY 8-4
Implementing Dynamic IP Routing
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
Your company has grown and static routing no longer meets the needs of your network. You
plan to implement dynamic routing and need to install the routing protocol on your Windows
Server 2008 R2 router. Your company DHCP server is running on a Windows Server 2008 R2
system.
CompTIAВ® Network+В® (Exam N10-005)
278
Copyright В© Element K Corporation
LESSON 8
What You Do
How You Do It
1.
a. Choose Startв†’Administrative Toolsв†’
Routing and Remote Access.
Add RIP v2 as the routing protocol.
b. In the Routing and Remote Access window, expand COMPUTER## (local),
expand IPv4 and select General.
c. Choose Actionв†’New Routing Protocol.
d. In the New Routing Protocol dialog box,
select RIP Version 2 for Internet Protocol
and click OK to add RIP v2 as the routing
protocol.
2.
Add the RIP interfaces.
a. From the left pane, in the Routing and
Remote Access window, under IPv4,
select RIP.
b. Choose Actionв†’New Interface.
c. In the New Interface for RIP Version 2
for Internet Protocol dialog box, verify
that Local Area Connection is selected
and click OK.
d. In the RIP Properties - Local Area Connection Properties dialog box, click OK to
accept the default settings.
e. Choose Actionв†’New Interface.
f.
Verify the Loopback Adapter is selected,
and click OK.
g. Click OK to accept the default settings.
3.
Examine the dynamic routes.
a. With RIP selected, choose Actionв†’Show
Neighbors.
b. Observe that you have neighbor routers
running the RIP. Close the RIP Neighbors
window.
c. Close the Routing and Remote Access window.
Lesson 8: LAN Infrastructure
279
Copyright В© Element K Corporation
LESSON 8
TOPIC D
Virtual LANs
In the previous topics in this lesson, you identiп¬Ѓed the functions of routers and switches in
LAN implementations. Once you understand the basic operation of switches and routers, you
are ready to start considering implementing some of their more advanced capabilities in a virtual LAN environment. In this topic, you will identify VLANs and their functionalities.
There may be instances where you will have to handle LAN implementations in different locations without modifying or relocating the systems on the network. In such cases, breaking the
network into smaller virtual LANs makes them easier to manage. VLANs also contribute to
improving the overall network performance by grouping users and network resources that frequently communicate.
VLANs
Deп¬Ѓnition:
A virtual LAN (VLAN) is a LAN in which the network components can be connected
even when they are not on the same LAN segment. It is a logical network without the
physical characteristics of a LAN. Key hardware in a VLAN includes a conп¬Ѓgurable
managed switch, known as a VLAN switch, which can build a logical network in any
required conп¬Ѓguration, even when computers are on different physical segments.
Conп¬Ѓguration management can be done through software and there is no need to relocate the devices physically. Each VLAN is logically a network in itself, and if there
are packets that are meant for a node that does not belong to a VLAN, they must be
forwarded by a routing device. Unlike the regular LAN that is limited by physical distances, VLANs can network irrespective of the physical distances involved and also
can group individual networks that are based on different technologies.
Example:
Figure 8-19: LAN segments forming a VLAN.
CompTIAВ® Network+В® (Exam N10-005)
280
Copyright В© Element K Corporation
LESSON 8
IEEE 802.1q
IEEE 802.1q is a networking standard that supports VLANs in an Ethernet-based network. When a switch assigns the VLAN identiп¬Ѓcation information to a packet, through
a process known as tagging. Two popular protocols for tagging are the Inter-Switch
Link (ISL) and the IEEE 802.1q protocol. ISL is the Cisco proprietary protocol for
tagging packets and associating them with a particular VLAN on legacy switches,
while 802.1q is the IEEE standard for VLAN trunking. Newer Cisco and Juniper Networks switches use 802.1q for tagging.
Uses of a VLAN
VLANs can be used to separate groups from the larger network; for example, a group
of users that design and test new software. Also, a VLAN can be used to restrict
access to network resources from temporary employees or visitors.
Advantages of a VLAN
A VLANвЂ™s biggest advantage is that once the physical network is built it is independent of the virtual network, which can be reconп¬Ѓgured for optimal performance by
simply changing the VLANвЂ™s conп¬Ѓguration. The network does not have to be rewired.
For example, if a given node sends most of its traffic to an endpoint in a separate
subnet, that node can be removed from its current subnet and placed in the endpointвЂ™s
subnetвЂ”all without changing a single cable and without the userвЂ™s knowledge.
VLANs lend themselves to remote administration because an administrator can telnet
into the VLAN device rather than physically visit it, as long as the physical point-topoint conп¬Ѓguration does not change. Also, VLAN switches are relatively expensive but
the advantages and improvements in network performance outweigh the cost.
Types of VLANs
VLANs can be broadly classiп¬Ѓed into three types depending upon the characteristics used for
its segmentation.
Type
Computers Are Conп¬Ѓgured to a VLAN Based On
Port-based VLANs
The ports that are a part of the VLAN. For example, in a switch with п¬Ѓve
ports, ports 1, 2, and 3 can be conп¬Ѓgured to belong to VLAN A and ports 4
and 5 to belong to VLAN B.
MAC address-based
VLANs
The MAC address of the computers. Switches are conп¬Ѓgured to identify the
MAC addresses of individual computers connected to it. These MAC addresses
are grouped to form the VLAN.
Subnet-based VLANs
The IP subnets that they belong to. The IP addresses are used only as references to identify computers that are to be conп¬Ѓgured to the VLAN.
VLAN Switch Functions
A VLAN switch is a manageable switch used on VLANs. It enables the network administrator
to conп¬Ѓgure the network in a logical topology. All VLAN segments have equal dedicated connections to all nodes in the segment. The VLAN switch can tie any of its interfaces together
into a logical subnet with all the characteristics of a physical subnet. This scheme enables an
administrator to control IP addresses, MAC contention domains, and interior routing by using
VLAN switch conп¬Ѓguration parameters.
Lesson 8: LAN Infrastructure
281
Copyright В© Element K Corporation
LESSON 8
Figure 8-20: A VLAN switch ties its interfaces into logical subnets.
VLAN Connections
If it is necessary for users on different VLANs to communicate, you need to connect
the VLANs using a Layer 3 network device, such as a router, or by using a higher
layer switch.
VLAN Switches vs. Routers
When a VLAN switch receives data, it routes the data based on the destination IP
address, just like a router. However, because all the routed subnets are conп¬Ѓgured in
the VLAN, there are no local routes more than two hops away. Exterior routes are
handled the same way as they are handled in a regular routed networkвЂ”they are sent
to a default gateway and routed to distant networks.
VTP
The VLAN Trunking Protocol (VTP) is a messaging protocol used on VLANs developed by
Cisco. All the changes made to a VLAN are documented as VTP conп¬Ѓgurations. The main
function of VTP is to advertise the switching information and conп¬Ѓguration changes on a
VLAN through all the switches on a network. VTP eliminates the hassles involved in porting
the same VLAN to another network, which is managed by different switches. It also allows
conп¬Ѓguring switches as a group for management in a VLAN.
CompTIAВ® Network+В® (Exam N10-005)
282
Copyright В© Element K Corporation
LESSON 8
Figure 8-21: VTP advertises switching information to all switches on a network.
VTP Modes
There are three VTP modes that a switch can use: server, client, and transparent.
вЂў
Server mode: This is the default mode for VTP on a switch. In the server mode,
a switch can modify VLANs. This information is then transmitted to all the other
switches that are conп¬Ѓgured to the same group using VTP.
вЂў
Client mode: In the client mode, a switch cannot modify VLANs but will receive
conп¬Ѓguration information from other switches.
вЂў
Transparent mode: In the transparent mode, a switch receives conп¬Ѓguration messages from other switches but does not process them. Conп¬Ѓguration changes to
the VLAN are not transmitted to other switches in the group.
Lesson 8: LAN Infrastructure
283
Copyright В© Element K Corporation
LESSON 8
ACTIVITY 8-5
Conп¬Ѓguring VLANs
This is a simulated activity available on the CD-ROM that shipped with this course. The activity simulation can be
launched either directly from the CD-ROM by clicking the Interactives link and navigating to the appropriate one,
or from the installed data п¬Ѓle location by opening the C:\Data\Simulations\Lesson#\Activity# folder and doubleclicking the executable (.exe) п¬Ѓle.
Scenario:
You are the network administrator for OGC Technologies. You have been asked to separate the
computers used in the R&D department from the computers used in the production environment. As you have a VLAN, you decide to reconп¬Ѓgure the network to separate the computers.
What You Do
How You Do It
1.
a. Browse to the C:\Data\Simulations\
Lesson8\Activity8-5 folder.
Configure VLANs.
b. Double-click the executable file.
c. In the Open File - Security Warning message box, click Run.
d. Follow the on-screen steps for the simulation.
e. Close the C:\Data\Simulations\Lesson8\
Activity8-5 folder.
CompTIAВ® Network+В® (Exam N10-005)
284
Copyright В© Element K Corporation
LESSON 8
TOPIC E
Plan a SOHO Network
In the previous topic, you identiп¬Ѓed the components of a VLAN implementation. As Network+
certiп¬Ѓed professionals, you may need to set up a network that is similar to a VLAN but much
smaller in magnitude with just a few systems interconnected. In this topic, you will implement
a Small Office/Home Office (SOHO) network.
Just as you design a large network, you need to be able to design smaller SOHO networks that
suit the physical boundaries of a smaller location. By being aware of the best practices for setting up a small network, you will be able to accurately identify the requirements and resources
that match the location.
SOHO Networks
Deп¬Ѓnition:
A Small OffД±ce/Home OffД±ce (SOHO) network is a small network that can comprise up
to 10 nodes. SOHO networks can either be wired or wireless. It is necessary that all
the computers in a SOHO network be present at the same physical location. A SOHO
can include devices such as switches or routers.
Small Ofп¬Ѓce/Home Ofп¬Ѓce is sometimes referred to as Single Ofп¬Ѓce/Home Ofп¬Ѓce.
Example:
Figure 8-22: Components of a SOHO network.
SOHO Network Hardware
The list of device types and other requirements to implement a SOHO network is:
вЂў
Computers and laptops: About 1 to 10 computers that are to be connected on the network.
вЂў
Specialized connectivity devices - SOHO hubs, switches, and routers.
вЂў
Peripheral devices: Printers, fax machines, access points, and biometric devices can also
be added to the network.
вЂў
Modem: An ADSL modem to connect to the Internet.
Lesson 8: LAN Infrastructure
285
Copyright В© Element K Corporation
LESSON 8
вЂў
And, Cable length: For a wired SOHO, you need connecting cable lengths of 100 to 200
meters.
Small Office Routers
Routing in a SOHO network does not require routing hardware as large networks and
the Internet. There are several popular, relatively inexpensive, and easy to implement
router products that are designed to support both wired and wireless SOHO networks,
available from D-Link, Linksys, and NETGEAR.
How to Plan a SOHO Network
SOHO networks require meticulous planning to set up. Planning a SOHO network is not the
same as planning a regular enterprise network. There are speciп¬Ѓc requirements that need to be
met to successfully set up a SOHO network.
Guidelines:
To plan a SOHO network:
вЂў
Connect up to 10 computers in the SOHO network.
вЂў
Ensure that the access points are distributed strategically to maintain seamless
connectivity, if your SOHO network is implemented using the wireless technology.
вЂў
Use routers and switches that can scale up, to handle the data transmission
requirements of the computers on the network. Personal use routers and switches
may not support a SOHO.
вЂў
Plan the connectivity and placement of other devices such as printers and fax
machines if needed on your network.
вЂў
Conceal the cabling to avoid disruption or outages on wired SOHOs.
Example:
Thomas Lee is a network professional who is hired by OGC Technologies to set up a
SOHO network for a small unit of staff in a remote location. Before planning the network, Thomas enquires about the number of employees who will be working in the
facility. As the new facility will primarily act as a customer support center, it will have
no more than 15 employees.
He decides that a wireless SOHO will suit the requirements, and requests that his client procure the required wireless equipment that include laptops for the employees,
wireless routers that can handle a small network, access points and a wireless printer.
Based on the number of access points required, he determines strategic locations to
place them to ensure seamless connectivity. He also determines a suitable location for
the printer.
Limitations of a SOHO Network
There are some environment limitations in setting up a SOHO network. All the computers and peripheral devices should be over a short range as long distance networking
is not supported.
A SOHO setup has some equipment limitations and is recommended for a maximum
of 10 devices that include workstations, printers, and fax machines with one hub,
switch, or router. SOHO networks cannot support more devices. Segmentation of the
network is also not possible.
CompTIAВ® Network+В® (Exam N10-005)
286
Copyright В© Element K Corporation
LESSON 8
Compatibility Requirements
As SOHO is intended for smaller networks or domestic purposes, multiple devices and
technologies such as switches, routers, VLANs, VPNs are not recommended. Switches
and routers designed for medium-sized or larger networks are expensive to be used in
SOHO environments.
ACTIVITY 8-6
Planning a SOHO Network
Scenario:
In this activity, you will plan a SOHO network.
What You Do
1.
How You Do It
What is the maximum number of computers that can be connected in a SOHO network?
a) 10
b) 30
c) 50
d) 100
2.
True or False? Connectivity devices such as routers and switches meant for domestic
purposes can be used on SOHO networks.
True
False
Lesson 8 Follow-up
In this lesson, you identiп¬Ѓed the components of a LAN implementation. Since a LAN is the
fundamental unit of computer networking, all networking professionals will need a thorough
understanding of LAN technologies and their components.
1.
Of the LAN infrastructure technologies discussed in this lesson, which ones do you
expect to work with the most? Why?
2.
What do you see as the pros and cons of implementing static routing over dynamic
routing?
Lesson 8: LAN Infrastructure
287
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
288
Copyright В© Element K Corporation
LESSON 9
LESSON 9
Lesson Time
2 hour(s), 25 minutes
WAN Infrastructure
In this lesson, you will identify the infrastructure of a WAN implementation.
You will:
вЂў
Identify the major transmission technologies used in WANs.
вЂў
Identify the major WAN connectivity methods.
вЂў
Identify voice over data transmission systems and technologies.
Lesson 9: WAN Infrastructure
289
Copyright В© Element K Corporation
LESSON 9
Introduction
In the previous lesson, you identiп¬Ѓed the components of a LAN implementation. There are
other technologies that can be implemented on a WAN. In this lesson, you will identify the
components of a WAN implementation.
Many local networks these days have a wide area connection to a distant network. Moreover,
virtually every network connects in one way or another to the biggest WAN of them all, the
Internet. As a networking professional, you will need to understand the infrastructure of these
WAN connections so that you can ensure connectivity in the networks that you support.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
вЂў
вЂў
Topic A:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.4 Categorize WAN technology types and properties.
вЂ”
3.5 Describe different network topologies.
вЂ”
3.8 Identify components of wiring distribution.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.4 Categorize WAN technology types and properties.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.6 Explain the function of common networking protocols.
вЂ”
2.4 Given a scenario, troubleshoot common wireless problems.
вЂ”
4.6 Explain different methods for network performance optimization.
TOPIC A
WAN Transmission Technologies
You have identiп¬Ѓed the transmission technologies and characteristics of a LAN implementation. When there are multiple LAN implementations that need to communicate, the LANs
connect to form the larger framework of a WAN that uses transmission technologies different
from a LAN. In this topic, you will identify the transmission technologies used on a WAN
implementation.
Present day communications span the globe. A WAN covers a very large geographical area,
and can connect multiple smaller networks. The transmission method used on your WAN
might affect overall network performance and cost more than any other factor. From the slowest dial-up to the fastest п¬Ѓber-optic service, you will need to understand the capabilities of and
limitations to your networkвЂ™s transmission method to choose the one best-suited for your network.
CompTIAВ® Network+В® (Exam N10-005)
290
Copyright В© Element K Corporation
LESSON 9
ATM
Asynchronous Transfer Mode (ATM) is a cell-switching network technology that supports highspeed transfer of voice, video, and data in LANs, WANs, and telephone networks. ATM LAN
implementations are uncommon because they are expensive and complex. However, ATM
WAN implementations have become reasonably popular because of their versatility and high
bandwidth availability. Information is transferred in п¬Ѓxed-size packets, called cells, each consisting of 53 bytes. ATM networks are made up of switches, which transport data cells among
networks.
ATM is a connection-oriented protocol. In other words, if a node is going to send cells to
another node, it will п¬Ѓrst establish a connection. The connection is terminated only after all
cells are sent. After connection establishment, ATM routes the cells using identiп¬Ѓers rather than
using source and destination addresses. ATM offers reliable Quality of Service (QoS), and is
envisioned as the technology for providing broadband Integrated Services Digital Network
(ISDN) services.
ATM handles broadband applications efficiently, and at the same time, allows users to assign
priority to traffic on the network. ATM is used for various applications such as video on
demand, high-speed data transfer, teleconferencing, remote sensing, 3-D interactive simulations, and tele-instruction.
Figure 9-1: ATM provides high-speed data transfer.
ATM Features
The versatility of ATM can be attributed to a variety of features.
Feature
Description
Bandwidth options
Provides a wide range of high bandwidth optionsвЂ”155 Mbps to
622 Mbps are commonly deployed, but ATM can support 51.84
Mbps to 2.488 Gbps.
Types of traffic
Allows the capability to carry data, voice, and video simultaneously on the same channel.
Lesson 9: WAN Infrastructure
291
Copyright В© Element K Corporation
LESSON 9
Feature
Description
Fixed cell size
The п¬Ѓxed 53-byte cell size enables ATM to be implemented in
hardware, reducing overhead and drain on resources required to
move data on a network.
QoS
Built-in QoS features in the design aid in the п¬‚ow of data
between endpoints of the ATM network.
Traffic contracting and shaping
Traffic contracting assigns a set data rate to an endpoint. When
an endpoint connects to an ATM network, it enters into a contract with the network for service quality. The ATM network
will not contract more services than it can provide.
Traffic shaping optimizes data п¬‚ow on an ATM network. It
includes control of bursts and optimizing bandwidth allocation.
Real-time and non real-time
data support
Real-time data support is used for time-sensitive data such as
voice or video and travels at a higher priority than non real-time
data.
ATM Network Interface Types
ATM network interfaces connect ATM devices and fall into two categories: User-toNetwork Interface (UNI) and Network-to-Network Interface (NNI). The UNI, as a user
device, is an ATM border device that connects one ATM network to another ATM network or a LAN. NNI is a switch that is inside an ATM network. Individual devices
can connect to an ATM network, but this is rare.
ATM Connections
ATM is not a channelized service and does not waste channels by assigning them to
nodes that are not talking. In a situation when the device is offline, ATM does not hold
the channel. It makes that bandwidth available to other nodes, exhibiting traffic contracting to allocate the necessary bandwidth without wasting it by reservation.
An ATM switch makes virtual connections with other switches to provide a data path
from endpoint to endpoint. Individual connections are called Virtual Channels (VCs).
VCs support the connection-oriented transport between endpoints and are identiп¬Ѓed by
a Virtual Channel Identiп¬Ѓer (VCI). VCs with a common path are tied together into Virtual Paths (VPs) and are identiп¬Ѓed by a Virtual Path Identiп¬Ѓer (VPI). You can form a
Transmission Path (TP) by combining multiple VPs.
An ATM endpoint (or end system) contains an ATM network interface adapter.
Frame Relay
Frame Relay is a WAN protocol that functions at the Physical and Data Link layers of the OSI
model. It is a packet-switched technology that allows transmission of data over a shared network medium and bandwidth using virtual circuits. Frame Relay transmits data using virtual
circuits. As virtual circuits consume bandwidth only when they transport data, each device can
use more bandwidth and transmit data at higher speeds. Frame Relay provides reliable communication lines and efficient error-handling mechanisms that discard erroneous data frames.
CompTIAВ® Network+В® (Exam N10-005)
292
Copyright В© Element K Corporation
LESSON 9
Figure 9-2: Frame Relay allows stations to share the network medium and bandwidth.
Frame Relay Network Components
Frame Relay uses Data Termination Equipment (DTE) and Data Communications
Equipment (DCE) to connect to the appropriate Frame Relay network, referred to as
the Frame Relay Bearer Service (FRBS). Inside the FRBSвЂ”or frame relay network
cloudвЂ”is a network of switches that makes connections between endpoints. A virtual
circuit is established between two DTE devices. DTE equipment can consist of a
single network device such as a router. DCE typically is a Channel Service Unit/Data
Service Unit (CSU/DSU) that sends signals to an Edge System (ES), a switch on the
Frame Relay network.
A CSU/DSU is a combination of two WAN connectivity devices that work together to
connect a digital WAN line with a customerвЂ™s LAN. The DSU receives the signal from
the LAN and passes it to the CSU. The CSU converts the signal format to make it
compatible with the Digital Data Service (DDS) on the WAN line.
The virtual circuits used in Frame Relay prevents you from seeing the complexity of
communication inside the cloud. Keep in mind that you never see the complexity of
communication happening inside the cloud because Frame Relay communicates using
virtual circuits. There are two types of virtual circuits: permanent and switched. Permanent Virtual Circuits (PVCs) are created by service providers inside their devices and
the circuit is constant. Switched Virtual Circuits (SVCs) are established during data
transmission and when the data вЂњconversationвЂќ is over, the connection is closed.
Advantages and Disadvantages of Frame Relay
The advantages of Frame Relay are:
вЂў
It offers facilities like that of a leased line, but at a signiп¬Ѓcantly lower cost.
вЂў
It delivers increased performance with reduced network complexity.
вЂў
It can be implemented over the existing technology.
вЂў
It can be easily conп¬Ѓgured to combine traffic from different networking protocols.
The disadvantages of Frame Relay are:
вЂў
Data transmission may exceed network capacity as clients use a common network,
and this results in the slowing down of the network.
вЂў
Since Frame Relay uses variable-length packets, there is difficulty ensuring QoS.
Lesson 9: WAN Infrastructure
293
Copyright В© Element K Corporation
LESSON 9
X.25 Switched Networks
Like Frame Relay, X.25 is a legacy packet switching network technology developed in
the 1970s to move data across less-than-reliable long-distance public carriers available
at that time. X.25 emphasizes reliable delivery, so it involves a lot of overhead and
compromises performance. X.25, like many switched network protocols, is implemented on top of leased lines or other local connection technologies.
In an X.25 network, an endpoint is called Data Terminal Equipment (DTE). DTE can
be a card installed in either a PC or a server that interfaces with a router, or it can be a
standalone unit. DTE is connected to Data Circuit Equipment (DCE), which connects
the customer to the X.25 backbone. The backbone of the network is made up of Packet
Switching Equipment (PSE).
MPLS
Multiprotocol Label Switching (MPLS) is a high-performance, multi-service switching technology in use in packet data networks. It is deп¬Ѓned by a set of IETF speciп¬Ѓcations that enable
Layer 3 devices, such as routers, to establish and manage network traffic. It ensures faster
switching of data as it follows label switching that helps save processing time of packets by
the label-switching routers.
In an MPLS network, routers add a label to each incoming data packet and forward the packet
along a predeп¬Ѓned path, based on the label rather than the destination IP address. As a result,
routing lookups performed on every router are reduced. MPLS can transport data from different technologies and protocols such as IP, ATM, Frame Relay, Synchronous Optical Network
(SONET), and Ethernet over a common infrastructure. Therefore, the reference is called
multiprotocol.
Figure 9-3: MPLS performs multi-service label switching using Layer 3 routers.
Beneп¬Ѓts of MPLS
With the evolution of converged networks, network developers face major challenges
such as increased traffic demands. MPLS enables Class of Service (CoS) tagging and
prioritization of network traffic, so network administrators can specify which applications should take priority on a network. This function makes an MPLS network
important to applications such as Voice over IP (VoIP). MPLS carriers differ on the
number of classes of service they offer and the pricing of these CoS tiers.
CompTIAВ® Network+В® (Exam N10-005)
294
Copyright В© Element K Corporation
LESSON 9
DSL
A Digital Subscriber Line (DSL) is a point-to-point, public network access broadband Internet
connection method that transmits digital signals over existing phone lines. Telephone companies use DSL to offer data, video, and voice services over these existing lines. DSL
accomplishes this connection by transporting voice as low-frequency signals and data as highfrequency signals. It has become a popular way to connect small businesses and households to
the Internet because of its affordability and high download speedsвЂ”typically upward of 1.5
Mbps. However, distance and the quality of lines affect the total bandwidth available to a customer.
Figure 9-4: DSL transmits digital signals over phone lines.
DSL is commonly referred to as xDSL, denoting the different types of DSL technologies.
DSL Technology
Description
Asymmetric DSL
ADSL is the most popular DSL technology. It allows residential customers to
access the Internet and receive phone calls simultaneously. Provides high
bandwidth, high-speed transmission over regular telephone lines. Called
asymmetric as most of the bandwidth is used for information moving downstream. Widely used where users download more information than what they
send. Offers speeds of up to 8 Mbps.
Symmetric DSL
Unlike ADSL, SDSL provides symmetric connectivity to users. Although it
also uses telephone lines, it offers other services on the same line. It provides
the same download and upload speeds. Offers speeds of up to 1.5 Mbps.
High bit rate DSL
HDSL was developed to carry high-speed data over T1 lines. It offers speeds
of up to 1.5 Mbps. HDSL2 is a more recent version and offers the same rate
over a single pair of copper wires.
Single-pair high-speed
DSL
SHDSL improves on both SDSL and HDSL by offering high speed, symmetric DSL over a single copper line. Has speeds of up to 2.3 Mbps.
Rate-adaptive DSL
RADSL adjusts the upstream speed of the connection to maintain higher
downstream speeds, i.e., the upstream bandwidth is adjusted to create greater
bandwidth for downstream traffic.
Very high-speed DSL
VDSL provides very fast data transmission across short distances over a
single pair of copper wires. It offers speeds of up to 55 Mbps for downstream, and 1.6 to 2.3 Mbps in the upstream direction.
Lesson 9: WAN Infrastructure
295
Copyright В© Element K Corporation
LESSON 9
DSL Technology
Description
ISDN DSL
IDSL is a cross between ISDN and xDSL. Provides data communication
channels at a speed of 144 Kbps. Was developed for customers who were not
within the reach of DSL service providers.
Voice over DSL
VoDSL adds voice channels to an existing DSL connection. VoDSL digitizes
voice signals and transports them as data signals.
Dial-Up and Broadband Connectivity
There are two common methods used to provide Internet connectivity to customers:
dial-up and broadband.
Method
Description
Dial-up lines
Dial-up lines are local loop PSTN connections that use modems,
existing phone lines, and long-distance carrier services to provide
low cost, low bandwidth WAN connectivity, and remote network
access. Dial-up lines are generally limited to 56 Kbps, and are
sometimes used as backups for higher bandwidth WAN services.
Broadband
Broadband offers high-speed Internet access as it has a higher
rate of data transmission. It has speeds of 256 Kbps or higher. It
offers much higher speeds than dial-up connections and allows
the simultaneous use of a telephone line.
PSTN
PSTN is an international telephone system that carries analog voice data. PSTN offers
traditional telephone services to residences and establishments. PSTN includes telephones and fax machines that set up temporary but continuous connections. During a
call, a circuit is established between two users and is kept open even during periods of
silence. This provides guaranteed QoS but uses bandwidth inefficiently.
ISDN
ISDN is a digital circuit switching technology that carries both voice and data over digital
phone lines or PSTN wires. ISDN uses digital channels for data transmission over conventional telephone lines. But unlike telephone signaling, ISDN signals are not converted to
analog and are transmitted as digital signals. Similar to a telephone number, ISDN uses identiп¬Ѓers to establish a connection on-demand by dialing another ISDN circuitвЂ™s telephone number.
ISDN uses п¬Ѓve identiп¬Ѓers including the telephone number, a Service Proп¬Ѓle Identiп¬Ѓer (SPID),
and three dynamic connection identiп¬Ѓers. ISDN is a channelized service and has two interface
modes: Basic Rate Interface (BRI) or Primary Rate Interface (PRI), which includes more data
channels to provide higher bandwidth.
CompTIAВ® Network+В® (Exam N10-005)
296
Copyright В© Element K Corporation
LESSON 9
Figure 9-5: ISDN carries voice and data over digital phone lines or PSTN wires.
Channels
Channelized services use multiple communication channels, tied logically together
within the set bandwidth, to form a single communication path of bandwidth equal to
the sum of the individual channelsвЂ™ bandwidth. In other words, they combine all of
their individual bandwidths to make one channel with a lot of bandwidth. Channels
that carry data are called bearer channels, or B channels, and the channel used to set
up, control, and take down the connection is called the delta channel, or D channel.
BRI uses two 64 Kbps B channels and one 16 Kbps D channel for a total bandwidth
of 144 Kbps. BRI is a simpler service offering and allows users to use their existing
cabling. BRI services have a span of about 3.4 miles from a service provider to the
customerвЂ™s premises. PRI uses twenty-three 64 Kbps B channels and one 64 Kbps D
channel for a total bandwidth of 1.5 Mbps. It is used primarily for multi-user WAN
connections. As demand for higher bandwidth connections to the Internet grew, BRIISDN was deployed at many small businesses and homes. However, ISDN, for the
most part, has been replaced by ADSL technology.
ISDN Hardware
ISDN hardware includes Terminal Equipment (TE), Terminal Adapters (TAs), Network
Termination (NT) devices, Line Termination (LT) and Exchange Termination (ET)
equipment. TEs are communications equipment that stations use to accomplish tasks at
both ends of a communications link. TAs form the hardware interface between a computer and an ISDN line. NTs are devices that connect the local telephone exchange
lines to a customerвЂ™s telephone or data equipment. ISDN lines terminate at a customerвЂ™s premises using an RJ-45 connector in a conп¬Ѓguration called a U-interface, which
usually connects to a Network Termination Unit (NTU). The NTU can directly connect
to ISDN-aware equipment, such as phones or ISDN NICs in computers. This type of
equipment is called Terminal Equipment type 1 (TE1).
Lesson 9: WAN Infrastructure
297
Copyright В© Element K Corporation
LESSON 9
T-Carrier Systems
The T-carrier system is a digital and packet-switched system designed to carry multiplexed
telephone connections. It makes communications more scalable than analog, circuit-switched
systems. T-carrier systems use two twisted pairs of copper wires. The п¬Ѓrst pair is used for
transmission and the second pair for reception. Therefore, T-carrier systems support full-duplex
communication. T1 and T3 are the two most common T-service levels. T-services can be used
to support a point-to-point WAN where the service provider sets up a dedicated connection
between two T-service endpoints.
Figure 9-6: T-carrier systems allow multiplexed telephone connections.
T-services connect a customerвЂ™s office with the service providerвЂ™s network. The internal connection is over Frame Relay. The T-service can also connect an office to the telephone
company for remote access. Individual remote clients dial in to a number and the service provider before routing them to the office through the T-service. This way, a server can service
multiple dial-in connections without needing many modems.
Digital Signal Services
Digital Signal (DS) services are a hierarchy of different digital signals that transfer
data at different rates. The T-carrier system is the most common physical implementation of the ANSI Digital Signal Hierarchy (DSH) speciп¬Ѓcations. DSH is a channelized
data transmission standard used to multiplex several single data or voice channels for a
greater total bandwidth. It was established in the 1980s, primarily for use with digital
voice phones. In T-carrier implementations, DSH systems have become the standard
building block of most channelized systems in the United States today.
DSH deп¬Ѓnes a hierarchy of DSx speciп¬Ѓcations numbered DS0 to DS5. The basic DS0
level speciп¬Ѓes a single voice channel of 64 Kbps. A DS1 signal bundles 24 DS0 channels and uses a T1 carrier line. The different types of DS services vary depending upon
their data transmission rates.
вЂў
DS0: Carries data at the rate of 64 Kbps.
вЂў
DS1: Carries data at the rate of 1.5 Mbps.
вЂў
DS2: Carries data at the rate of 6.3 Mbps.
вЂў
DS3: Carries data at the rate of 44.4 Mbps.
вЂў
DS4: Carries data at the rate of 274.2 Mbps.
T-Lines
In order to implement a different DS service, telephone companies use T-lines whose
carrying capacities match the data rates of DS services.
Type of T-Line
Service
T1
DS1
CompTIAВ® Network+В® (Exam N10-005)
298
Copyright В© Element K Corporation
LESSON 9
Type of T-Line
Service
T2
DS2
T3
DS3
T4
DS4
E-Carrier Systems
The E-carrier system is a dedicated digital line that transmits voice or data. It is used
in Europe, Mexico, and South America. The different E carriers transmit data at different rates.
Carrier
Transmission Rate
E0
64 Kbps
E1
2 Mbps
E2
8.4 Mbps
E3
34.4 Mbps
E4
139.3 Mbps
E5
565 Mbps
Digital Network Hierarchies
Digital networks have two hierarchical structures that deп¬Ѓne them: the Plesiochronous Digital
Hierarchy (PDH) and the Synchronous Digital Hierarchy (SDH). PDH networks carry data
over п¬Ѓbre optic or microwave radio systems. In this type of network, the different parts are
ready, but are not synchronized. They have largely replaced PDH for a synchronized network
in which the movement of data is highly synchronized along different parts. In SDH, data
moves on an optical п¬Ѓber using LEDs. Basic data transmission occurs at a rate of 155.5 Mbps.
SONET/SDH
The Synchronous Optical Network (SONET) is a standard for synchronous data transport over
a п¬Ѓber optic cable. SONET is the U.S. version of the standard published by ANSI, while SDH
is the European version of the standard published by the International Telecommunications
Union (ITU).
SONET has two speciп¬Ѓcations: the OC speciп¬Ѓcation for п¬Ѓber optic cabling and the STS speciп¬Ѓcation for copper wire, although SONET over copper has severe limitations. SONET is
deployed in a self-healing dual-п¬Ѓber ring topology, similar to FDDI. When one ring works, the
other is a standby. Whenever the working ring fails, SONET recognizes the failure and
switches over to the second ring.
SONET is most widely used by inside service providers to act as a high-speed backbone for
other systems, such as Frame Relay and ATM. SONET/SDH can be used on an ATM network,
and connections to the lines can be made using single-mode or multi-mode optical п¬Ѓber. In
such a setup, ATM would be the switching technology, and SONET/SDH would be the transmission technology on the network.
Lesson 9: WAN Infrastructure
299
Copyright В© Element K Corporation
LESSON 9
SONET is divided into three areas. Each area is controlled by an integrated management system.
Figure 9-7: Divisions of a SONET.
Area
Description
Local collector
ring
A local collector ring interfaces with users and comprises Digital Cross-connect
Switches (DCSs) at the userвЂ™s location or connects to the userвЂ™s location by a
T-carrier. The DCS acts as a concentrator to transmit signals from a user to the
SONET ring. It supports connections from different technologies and from multiple
users. The technologies that can connect to the ring include ATM, T1 or T3 lines,
ISDN, or DSL voice.
Regional network
A regional network combines multiple collector rings by using Add/Drop Multiplexers (ADMs). The ADM allows data from collector rings to be added to the regional
ring. The data that is not accepted by the service requestor is discarded or sent back
to the ADM.
By managing bandwidth on the regional network, it becomes more efficient. When
data moves between two networks that the same regional network supports, the connection can be through the regional network.
Broadband backbone network
The broadband backbone network routes data between regional networks. It is
capable of carrying a large amount of data simultaneously in the ring, and the
requestor picks the data as it is transmitted.
Advantages of SONET
The key advantages of SONET are its excellent bandwidth management, built-in fault
recovery features, and support for data transfer speeds of up to 2.48 Gbps. A particular
advantage to SONET deployments is its interoperability. The technology often is used
to aggregate multiple lines (T1, T3 for example).
CompTIAВ® Network+В® (Exam N10-005)
300
Copyright В© Element K Corporation
LESSON 9
SONET Transmission Bandwidth
SONETвЂ™s transmission bandwidth ranges from 51.84 Mbps to 2.48 Gbps. Its hardware
actually operates at speeds in the 10 Gbps range, but the SONET standard has not
been expanded to include it.
ITU
The International Telecommunication Union (ITU) is an international organization
within the United Nations that deп¬Ѓnes global technical standards for telecommunications. ITU also coordinates the widespread use of the radio spectrum, ensuring
interference-free wireless communications. ITU also sponsors exhibitions and forums
to exchange ideas and discuss issues affecting international telecommunications.
DWDM
Dense Wavelength Division Multiplexing (DWDM) is a multiplexing technology that
uses light wavelengths to transmit data. Signals from multiple sources using different
technologies are carried simultaneously on separate light wavelengths. DWDM can
multiplex up to 80 separate data channels into a lightstream for transmission over an
optical п¬Ѓber. Data from different protocols and technologies such as IP, SONET, and
ATM can all travel simultaneously within an optical п¬Ѓber. SONET is combined with
WDM functions by sending SONET data streams out on different colors of light. The
sending SONET multiplexer connects light streams to the WDM card. At the receiving
end, the п¬Ѓber demultiplexes the light into a single color stream and sends it to SONET
equipment.
The Optical Carrier System
The Optical Carrier x (OCx) standard speciп¬Ѓes the bandwidth for п¬Ѓber optic transmissions. It
is a channelized technology based on the same 64 Kbps channel as DSH but with a base rate
of 810 channels. The OCx standard is open-ended, enabling manufacturers to add speciп¬Ѓcations as they develop hardware that supports faster transmission speeds.
OCx Speciп¬Ѓcations
OCx speciп¬Ѓcations correspond with the data rates of SONET. As one OC channel corresponds to a data rate of 51.84 Mbps, using multiple channels increases the rate by
51.84 Mbps per channel.
OCx Speciп¬Ѓcation
Description
OC1
1 OC channel with a data rate of 51.84 Mbps.
OC3
3 OC channels with a data rate of 155.52 Mbps.
OC9
9 OC channels with a data rate of 466.56 Mbps.
OC12
12 OC channels with a data rate of 622.08 Mbps.
OC18
18 OC channels with a data rate of 933.15 Mbps.
OC24
24 OC channels with a data rate of 1.24 Gbps.
OC36
36 OC channels with a data rate of 1.87 Gbps.
OC192
192 OC channels with a data rate of 9.95 Gbps.
Lesson 9: WAN Infrastructure
301
Copyright В© Element K Corporation
LESSON 9
PON
The Passive Optical Network (PON) is a point-to-multipoint optical network that is
used for broadcast transmissions using optical systems. As the optical transmission
requires no power or active electronic parts when the signal passes through the network it is referred to as passive. A PON contains a central office node, known as
Optical Line Termination (OLT) and Optical Network Units (ONUs) near end users.
An OLT can connect to up to 32 ONUs.
Satellite Transmission Systems
A satellite-based network offers immense geographical coverage, allowing for high-speed connections anywhere in the world to transmit data between endpoints. Satellite transmission
systems are used as an alternative to conventional communications, and as a cost-effective
method to transmit information to different locations globally. Satellite communications systems use Line-of-Sight (LoS) microwave transmission.
A satellite system consists of two segments: space and ground.
Figure 9-8: A satellite-based network.
Segment
Description
Space
A space segment contains one or more satellites organized into a constellation
and a ground station that provides operational control of the satellites.
Ground
A ground segment provides access from Earth stations to the satellite to meet
the communication needs of users. The ground segment contains terminals
that utilize the communication capabilities of the space segment. The ground
segment contains three basic types of terminals.
вЂў Fixed terminals access satellites while they are stationary.
вЂў Transportable terminals are portable, but remain stationary during transmission.
вЂў Mobile terminals can communicate with satellites even when they are in
motion.
Satellite Services
Satellites are used for a variety of purposes and each satellite service has different
requirements.
CompTIAВ® Network+В® (Exam N10-005)
302
Copyright В© Element K Corporation
LESSON 9
Satellite Service
Description
Satellite Internet
The satellite Internet is a method of connecting to the Internet using a
satellite network. This method can be broadly classiп¬Ѓed as a one-way or
two-way connection, based on how the request for an Internet connection
reaches the satellite. In a one-way connection, the request for an Internet
connection goes to the ISP via a phone line and is forwarded to the satellite.
Satellite phone network
A satellite phone is a telephone system that relies on the satellite network to provide services, instead of the local telephone switch
infrastructure. Satellite phones can be handheld or п¬Ѓxed, usually connected to an antenna at the top of a building.
When a call is made from a satellite phone to another satellite phone, the
call is routed directly via the satellite. If a call is made to a regular
phone, the satellite routes the call to the landline or cellular network via
an Earth station known as the gateway. The gateway converts the signals
so that the landline or cellular network can read them. Satellite phones
work well in open spaces, but they do not have a good reception within
buildings and enclosed spaces.
Satellite television
Satellite television is a method of relaying video and audio signals
directly to a subscriberвЂ™s television set using satellites. A satellite TV
network consists of a programming source that provides the original program.
The satellite TV provider, also known as the Direct Broadcast (DB) center, then broadcasts these channels to the satellites, which receive the
signals and rebroadcast them to Earth. The subscriberвЂ™s dish antenna
picks up the signals and sends them to the TV via a receiver, also known
as the Set-Top Box (STB). The satellite TV technology overcomes the
disadvantage of broadcast networks, where an LOS arrangement is necessary.
VSAT
A Very Small Aperture Terminal (VSAT) is a telecommunication Earth
station that consists of an antenna to transmit and receive signals from
satellites. The size of a VSAT ranges from 1.2 to 2.4 meters in diameter.
A network of VSATs provides a cost-effective solution to users who need
to connect several sites or offices that are dispersed geographically.
VSATs support transmission of voice, data, and video. A typical VSAT
network consists of an antenna placed on top of a building and connected to a transceiver and modem by a cable. The modem converts the
signals from the satellite into data or voice signals, and vice versa.
VSAT networks can be connected in a point-to-point, star, or mesh network.
GPS
A Global Positioning System (GPS) is a navigational system that consists
of a network of 27 satellites: 24 active and 3 in the standby mode. These
satellites are arranged in such a pattern that at least four of them are visible from any part of the world. A GPS receiver receives the distance
and time information from the four visible satellites and uses that information to calculate its current position. A GPS receiver needs an
unobstructed view of the sky.
Lesson 9: WAN Infrastructure
303
Copyright В© Element K Corporation
LESSON 9
WWAN
A Wireless WAN (WWAN) uses wireless network technology to allow users to check email, surf
the web, and connect to corporate resources accessible within wireless network boundaries.
Users connect to a WWAN using a WWAN card. WWANs use a number of technologies to
transfer data and connect to the Internet. Each of these technologies, however, falls into one of
three families: GSM/UMTS, cdmaOne/CDMA2000, and WiMAX. The GSM/UMTS and
cdmaOne/CDMA2000 protocols started out as cell phone technologies but now support data
transmission. WWAN technologies also use the Wireless Application Protocol (WAP), which
enables you to access the Internet from your mobile device.
Wireless Application Protocol shares its acronym with Wireless Access Point.
Figure 9-9: WWAN allows users access within wireless network boundaries.
Wireless LAN vs. Wireless WAN
The following table compares speeds, security, coverage, and costs of WLANs and
WWANs.
Factor
WLAN
WWAN
Coverage
Used in a single building of an
organization, a home, or a hotspot
such as a coffee shop. Usually
limited to 100 meters.
Used wherever a cellular network provider has coverageвЂ”can be regional,
national, or even global.
Speed
Typically 1 to 4 Mbps depending
on the number of users that share
the connection.
Typically 30 to 50 Kbps.
Security
Susceptible to hacking and
interoperability issues between
WLANs. Operates on a globally
allocated frequency that does not
require a license.
Tightly regulated frequencies spectrum
requiring licenses to operate within the
frequency. WWANs incorporate military
security technology with a high-level of
authentication and encryption.
Cost
No cost for the wireless connection within the range but a cost to
access the Internet via the WLAN
access point.
The subscription fee is similar to a cell
phone contract. Can be a monthly fee, per
minute or per megabyte charge.
CompTIAВ® Network+В® (Exam N10-005)
304
Copyright В© Element K Corporation
LESSON 9
LTE
Long Term Evolution (LTE) is a radio technology for wireless broadband access. It has
been introduced in 3GPP Release 8. LTE will be backward compatible with GSM and
HSPA. This compatibility will enable users to make voice calls and have access to data
networks even when they are in areas without LTE coverage. LTE will offer data rates
about 100 times faster than 3G networks, a downlink rate that exceeds 100 Mbps, and
an uplink rate of more than 50 Mbps.
HSPA
High Speed Packet Access (HSPA) refers to a family of technologies based on the
3GPP Release 5 speciп¬Ѓcation, which offers high data rate services in mobile networks.
HSPA offers a downlink speed of up to 14 Mbps and an uplink speed of up to 5.8
Mbps, making it possible for users to upload or download data at a high speed without
having to wait for cellular service providers to upgrade their hardware. The HSPA family includes High Speed Downlink Packet Access (HSDPA), High Speed Uplink Packet
Access (HSUPA), and HSPA+.
HSPA+ uses multicarrier technologies in which multiple 5 MHz carriers are aggregated
and a bigger data channel is used for data transmission. This large data channel also
decreases latency and provides an increased capacity for bursty traffic, such as web
applications. Evolved HSPA also aims to use an all-IP architecture, where all base stations will be connected to the Internet via the ISPвЂ™s edge routers.
WiMAX
Wireless Interoperability for Microwave Access (WiMAX) is a packet-based wireless telecommunication technology that provides wireless broadband access over long distances. Based on
the IEEE 802.16 standard, it is intended for wireless MANs. WiMAX provides п¬Ѓxed as well as
mobile broadband access. It covers a range of about 30 miles for п¬Ѓxed stations and 3 to 10
miles for mobile stations. WiMAX also provides LoS and NLoS communication, and can provide connection speeds of about 70 Mbps. WiMAX operates in the wireless frequency ranges
of between 2 and 11 GHz of the wireless spectrum.
WiMAX was created by an organization known as the WiMAX Forum.
Figure 9-10: Wireless broadband access using WiMAX.
Lesson 9: WAN Infrastructure
305
Copyright В© Element K Corporation
LESSON 9
WiMAX Services
WiMAX offers two different services: LoS and NLoS.
вЂў
LOS: Signals travel over a direct path from a transmitter to a receiver.
вЂў
NLOS: Signals reach a receiver through reп¬‚ections and diffractions.
Types of WiMAX
WiMAX is of two types: п¬Ѓxed and mobile.
Type
Description
Fixed
Is optimized for п¬Ѓxed applications in LOS and NLOS environments. The main disadvantage of п¬Ѓxed WiMAX is its difficulty to
compete with established wired technologies such as DSL in places
where the wired telecommunication infrastructure is well developed.
Mobile
Is optimized for portable and mobile applications in an NLOS environment. Mobile WiMAX includes additional features such as
power management, handoff, frequency reuse, channel bandwidth
scalability, and better NLOS performance and indoor penetration.
ACTIVITY 9-1
Discussing WAN Transmission Technologies
Scenario:
In this activity, you will discuss WAN transmission technologies.
1.
On which type of network is ATM most commonly implemented?
a) LAN
b) MAN
c) WAN
d) PAN
2.
How many bytes of data can an ATM cell transfer?
a) 56
b) 53
c) 52
d) 58
CompTIAВ® Network+В® (Exam N10-005)
306
Copyright В© Element K Corporation
LESSON 9
3.
Which technologies do OCx specifications match to?
a) ATM
b) SONET
c) Frame Relay
d) SDH
e) T1
4.
What are the channels used by BRI ISDN?
a) Two D channels and one B channel
b) Two B channels and one D channel
c) Three B channels and one D channel
d) Three B channels and two D channels
5.
Which of these technologies allows for more downstream traffic than upstream?
a) SDSL
b) SHDSL
c) ADSL
d) VDSL
6.
Which of these are features of a network with MPLS?
a) Label switching
b) Used with voice traffic
c) Multiprotocol adaptability
d) Not used with Frame Relay
7.
Upon which of these OSI layers does Frame Relay operate?
a) Transport
b) Application
c) Network
d) Physical
e) Data Link
Lesson 9: WAN Infrastructure
307
Copyright В© Element K Corporation
LESSON 9
TOPIC B
WAN Connectivity Methods
In the previous topic, you identiп¬Ѓed different WAN transmission technologies. With the transmission technology in place, another important aspect of WANs is their connectivity methods.
In this topic, you will identify major WAN connectivity methods.
Once you have decided how you are going to transmit data on a WAN, you still have one last
issue to deal with: how do you connect your self-contained LAN to a WAN that uses completely different technologies? Understanding the various WAN connectivity devices and
methods will help you implement your WAN connection appropriately.
Cable Internet Access
Cable Internet access uses a cable television connection and a cable modem to provide highspeed Internet access to homes and small businesses. Cable access is contention-based, with
users arranged in contention groups of nodes that split television and data signals at the cable
providerвЂ™s end. The speed of the network varies depending on the number of nodes in the contention group.
Figure 9-11: Cable providing high-speed Internet access.
Cable Modems
Deп¬Ѓnition:
Cable modems are hardware devices that connect subscribers to the service providerвЂ™s
cable systems. Service providers use a cable modem to connect the subscriberвЂ™s computer to the Internet using twisted pair cabling and a 10/100 network port or USB
connection. On the other end, the cable modem connects to the wall jack using coaxial
cabling. Most cable companies provide access up to 10 Mbps and require a 10-MB
network adapter. However, a cable modem can function reliably for speeds up to 27
Mbps. Cable modems operate at the Physical and Data Link layers of the OSI model.
CompTIAВ® Network+В® (Exam N10-005)
308
Copyright В© Element K Corporation
LESSON 9
Example:
Figure 9-12: Cable modems provide connectivity to the providerвЂ™s cable systems.
Dial-Up Connections
Dial-up lines are PSTN connections that use modems, existing phone lines, and long-distance
carrier services to provide low-cost, low-bandwidth WAN connectivity and remote network
access. Generally limited to 56 Kbps, dial-up lines are sometimes used as backups for higherbandwidth WAN services. Dial-up lines have two major drawbacks: they are slow and they can
have a considerable connection wait time. Despite these limitations, dial-ups are still used
because they provide enough bandwidth for affordable basic Internet connectivity services over
the existing telephone infrastructure.
Figure 9-13: Dial-up connections provide WAN connectivity.
Dial-Up Modems
Deп¬Ѓnition:
A dial-up modem is a communication device that converts a computerвЂ™s digital signals
into analog signals before transmission over telephone lines. The word, modem, represents modulation and demodulation because it converts digital signals into analog and
analog signals into digital. A dial-up modem can be either internal or external. Internal
dial-up modems exist as part of the motherboard and uses the PCвЂ™s power supply,
while external dial-up modems connect via the serial or USB port as separate expansion boxes. Unlike internal dial-up modems, external modems require separate power
supply. The disadvantage of a dial-up modem is that it is slow when compared to
broadband modems.
Lesson 9: WAN Infrastructure
309
Copyright В© Element K Corporation
LESSON 9
Example:
Figure 9-14: A dial-up modem.
Leased Data Lines
A dedicated line is a telecommunication path that is available 24 hours a day for use by a designated user; dedicated lines and leased lines are essentially the same. With dedicated or leased
lines, bandwidth availability varies with technology, but is usually between 56 Kbps and 2
Mbps. A company can lease the connection for a п¬Ѓxed fee, typically based on the distance
between endpoints. Leasing a line can be advantageous because it guarantees a п¬Ѓxed bandwidth over a dedicated line.
Figure 9-15: Leased lines for communication.
ICS
Internet Connection Sharing (ICS) is a connectivity service for computer systems that connects
multiple computers to the Internet by using a single Internet connection. The computer that is
connected to the Internet is called an ICS host, and the other computers are ICS clients.
CompTIAВ® Network+В® (Exam N10-005)
310
Copyright В© Element K Corporation
LESSON 9
Figure 9-16: ICS clients connect to the Internet via an ICS host.
An ICS host must have two network connections:
вЂў
A local area connection, which you can create by installing a network adapter that connects computers in your network.
вЂў
And, an external connection, which links the home or small-office network and the
Internet. ICS is enabled on this connection.
When you enable ICS, the LAN connection to the internal network is given a new static private IP address and conп¬Ѓguration. The ICS host then assigns new dynamic private IP addresses
to ICS clients.
Additional ICS Implementation Requirements
Other network conп¬Ѓguration requirements are available for an ICS connection. Because
the ICS host provides dynamic addressing and DNS proxy services to ICS clients,
there must not be any other active DNS or DHCP servers on the network, and ICS
clients must be conп¬Ѓgured for dynamic IP addressing. Also, the logon credentials for
the Internet connection on the ICS host must be shared for all users.
Satellite Media
Satellite media provide for long-range, global WAN transmissions. A physical link transfers the
signal to a satellite link at some point for transmission, and the satellite link then transmits the
signal back to a physical link at the other end of the transmission for data delivery. Due to the
greater distances the signal must travel, average latency is high, so satellite transmissions do
not always work well for real-time applications. Weather conditions also affect the signal. Satellite services provide varying speeds depending on the service agreement.
Figure 9-17: Signal transmission using a satellite.
Lesson 9: WAN Infrastructure
311
Copyright В© Element K Corporation
LESSON 9
Satellite Internet Access
Satellite Internet access is an example of direct, unbounded WAN transmissions.
Depending upon the provider, satellite TV customers can choose to receive Internet
access through the same satellite dish that receives their TV signals.
ACTIVITY 9-2
Discussing WAN Connectivity Methods
Scenario:
In this activity, you will discuss WAN connectivity methods.
1.
Which statement is true of satellite media?
a) Used for short-range transmissions
b) Offers high-speed connections
c) Has a low latency
d) Transmits data at the same speed
2.
What are the configuration requirements for ICS?
a) Clients must have two network connections.
b) The host must have two network connections.
c) Clients must be configured for dynamic IP addressing.
d) The network should not use other methods for dynamic addressing.
3.
True or False? The bandwidth availability for a dedicated line is usually between 28
Kbps and 2 Mbps.
True
False
4.
Identify the functionality of each WAN connectivity method.
Dial-up modem
Cable modem
Satellite media
ICS
a.
Provides long range global WAN
transmissions.
b. Converts a computerвЂ™s digital signals
into analog signals and vice versa.
c. Connects subscribers to the service
providerвЂ™s cable systems.
d. Connects multiple computers to the
Internet using a single Internet connection.
CompTIAВ® Network+В® (Exam N10-005)
312
Copyright В© Element K Corporation
LESSON 9
TOPIC C
Voice over Data Transmission
In the previous topics, you identiп¬Ѓed the data transmission technologies and connectivity methods used in WAN implementations. Another aspect of WAN implementations is the voice
transmission technology. In this topic, you will identify major voice over data systems.
A WAN implementation is valuable for moving data efficiently over long distances. But once
your WAN is in place, you might п¬Ѓnd that it is useful for moving other kinds of data as well,
including voice that standard telephone systems currently transport. Most networks today
implement some form of voice over data technology, so a knowledge of transmitting voice
over a WAN is critical to ensure that your network can support this requirement.
Converged Networks
Voice, video, and data are the three types of traffic carried over a network. Initially, there were
different networks speciп¬Ѓcally modeled to carry one type of traffic alone. Converged networks
allow all three types of traffic to move over the same network. ATM was the п¬Ѓrst technology
that allowed this convergence over a WAN. More recently, VoIP is used in the convergence of
data, voice, and video networks.
Figure 9-18: Convergence of networks.
Voice over Data Systems
Deп¬Ѓnition:
Voice over data systems are communication systems that replace traditional telephone
links by transmitting analog voice communications over digital WAN technologies.
Digital WANs provide more bandwidth than analog phone systems, and there is no
long-distance service cost involved. Because voice communications are time-sensitive,
the voice over data system must ensure that packets arrive complete and in sequence.
In a voice over data system, voice software interfaces with an analog voice device,
such as a microphone, to convert the analog voice into a data signal and to translate
the dialing destination into a network address.
Lesson 9: WAN Infrastructure
313
Copyright В© Element K Corporation
LESSON 9
Example:
Figure 9-19: Voice software converts analog voice into digital signals.
VoIP
Voice over IP (VoIP) is a voice over data implementation in which voice signals are transmitted in real or near-real time over IP networks. In VoIP telephony, analog voice signals are
converted into digital signals. As in a typical packet-switched network, digital signals are broken down into packets, to transmit voice as data. After reassembling the packets, the digital
signals are reconverted into audio signals.
When you make a telephone call, the network connection transmits signals over data networks,
and transfers them to the standard phone system if the called party does not have a VoIP service. Conversely, when you dial a number that maps to a VoIP device, VoIP routes the call to
the IP host. VoIP relies on the existing, robust infrastructure of IP networks and the nearuniversal implementation of IP. It also eliminates per-call costs, especially for long-distance
calls, because it uses data channels to transmit voice signals.
Figure 9-20: VoIP transmits voice signals over IP networks.
Beneп¬Ѓts of VoIP
Compared to traditional circuit-switched telephony, VoIP telephony provides various
beneп¬Ѓts for users and is thus gaining popularity.
CompTIAВ® Network+В® (Exam N10-005)
314
Copyright В© Element K Corporation
LESSON 9
Beneп¬Ѓt
Description
Cost reduction
The most attractive beneп¬Ѓt of VoIP telephony is the cost savings
it offers. You can make a call to anywhere in the world, yet pay
at the rates of downloads. For a business, the savings are especially considerable.
Mobility
Depending on the setup, you can make a VoIP call from anywhere you have Internet access.
Reduced infrastructure
With no need to provide for the cabling for a separate phone
system, VoIP telephony reduces infrastructure and its inherent
costs.
Integrated communication
As it is based on IP, some VoIP software integrates the transmission of not just voice data, but other forms of data. Thus, in
addition to speaking with someone else, you can send image
п¬Ѓles and exchange video, such as through a webcam.
Complementary features
VoIP service providers usually offer many features for free, such
as the caller ID and call forwarding, which are typically charged
by п¬Ѓxed line service providers.
Challenges to VoIP
Although VoIP telephony is gaining in popularity, it has many issues that need to be
addressed before replacing or even competing with traditional telephony.
Issue
Description
Connectivity
Connections to the Internet are still not completely reliable with most
providers, and there are times when you are not able to go online or
get disconnected often. An option would be to switch to a more reliable provider.
Voice delivery
As voice is delivered as packets, there may be periods of silence
resulting from delays in packet delivery. This can not only be annoying, but also consume online time as a conversation may take longer
to complete.
Power outage
During a power outage, you are not able to go online and therefore
cannot make a VoIP call. This is usually not a problem with traditional telephony, as phone companies provide for reserve power. An
option would be to install a backup system.
Security
With the increasing popularity of VoIP telephony, security vulnerabilities, though not a big concern presently, are bound to increase.
Hackers could not only listen to and intercept sensitive data, but
even break in to systems and accounts to utilize VoIP services illegitimately.
Emergency 911 calls
An emergency call from a traditional phone, in the event the caller is
unable to speak, can be traced. However, it is difficult to trace a
VoIP call, as voice packets bear an IP address rather than a location
address. The problem gets more complicated if the person is using a
portable device.
Lesson 9: WAN Infrastructure
315
Copyright В© Element K Corporation
LESSON 9
VoIP Protocols
A VoIP session may use one or more protocols, depending on session parameters.
Protocol
Description
Session Initiation Protocol
(SIP)
Initiates, modiп¬Ѓes, and terminates a session. It is a signaling protocol for
multimedia communication sessions. SIP must work with other protocols
because it is only responsible for the signaling portion of a communication session.
Session Description Protocol Describes the content of a multimedia communication session.
(SDP)
Real-time Transport Protocol Transmits audio or video content and deп¬Ѓnes the packet for delivery
(RTP)
including the type of content, sequence numbering, time stamping, and
delivery monitoring. Has no speciп¬Ѓc UDP or TCP port number; rather a
dynamic range of port numbers, a feature that makes traversing п¬Ѓrewalls
difficult.
Real-time Transport Control
Protocol (RTCP)
Monitors QoS in RTP transmissions. Acts as a partner to RTP to package
and deliver data but does not transport data.
QoS on VoIP
The quality of a voice service is affected by latency and jitter on a packet network.
Therefore, there is a need to ensure QoS for protecting voice from data and to ensure
that other critical data applications, which compete with voice, do not lose out on
bandwidth. The QoS implementation should also take care of packet loss, delays, and
efficient use of bandwidth.
Latency is the time delay for a packet to go from the source to the destination and
back to the source. Jitter is the variability of latency over time across a network. Jitter
should be minimum for real-time applications using voice and video.
CompTIAВ® Network+В® (Exam N10-005)
316
Copyright В© Element K Corporation
LESSON 9
ACTIVITY 9-3
Discussing Voice over Data Systems
Scenario:
In this activity, you will discuss the characteristics of voice over data systems.
1.
What are the advantages of VoIP as compared to traditional telephone systems?
a) Reduced long-distance call costs
b) Increased bandwidth
c) Portability
d) Power independent
2.
Match the VoIP protocol with its description.
SIP
SDP
RTP
RTCP
3.
a.
Transmits audio or video content and
deп¬Ѓnes the packet for delivery.
b. Monitors QoS in voice over data
transmissions.
c. Initiates, modiп¬Ѓes, and terminates a
session.
d. Describes the content of a multimedia
communication session.
Which statements are valid regarding voice over data systems?
a) Transmits digital signals over WAN technologies.
b) Voice communications are not time-sensitive.
c) Voice software converts digital data to analog voice signals.
d) Voice software translates a dialing destination to a network address.
Lesson 9 Follow-up
In this lesson, you identiп¬Ѓed the infrastructure and technologies used on a WAN implementation. As almost every LAN uses WAN technologies to connect to other networks, including the
Internet, understanding the WAN infrastructure helps you ensure WAN connectivity on the networks you support.
1.
Which WAN technologies do you expect to work with on your home and office networks? Why?
Lesson 9: WAN Infrastructure
317
Copyright В© Element K Corporation
LESSON 9
2.
In your opinion, what is the future for the implementation of voice over data systems
on conventional networks?
CompTIAВ® Network+В® (Exam N10-005)
318
Copyright В© Element K Corporation
LESSON 10
LESSON 10
Lesson Time
2 hour(s), 55 minutes
Remote Networking
In this lesson, you will identify the components of a remote network implementation.
You will:
вЂў
Identify the architectures used for remote access networking.
вЂў
Identify various remote access networking implementations.
вЂў
Identify the major components of a VPN implementation.
вЂў
Identify various VPN protocols.
Lesson 10: Remote Networking
319
Copyright В© Element K Corporation
LESSON 10
Introduction
In the previous lessons, you have described the technologies for implementing networks where
users have a computer with a direct connection to the network. Many wide area networks also
include remote users, who connect to the network using indirect, remote-networking technologies. In this lesson, you will identify the components of a remote network implementation.
Almost every organization needs to support remote users. Whether it is the employee who is
always on the move, works from a home office, or connects to the organizationвЂ™s network from
an occasional offsite conference, all your remote users need reliable, secure access to your network from their offsite locations. As a network professional, you will need to understand all
components required for remote network implementations so that you can support your remote
users effectively.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A, B, and D:
вЂў
вЂ”
5.2 Explain the methods of network access security.
вЂ”
5.3 Explain methods of user authentication.
Topic C:
вЂ”
4.1 Explain the purpose and features of various network appliances.
вЂ”
5.2 Explain the methods of network access security.
TOPIC A
Remote Network Architectures
You are familiar with the common network implementations. Many remote network implementations have similar conп¬Ѓgurations, or architectures. In this topic, you will identify the different
remote network architectures.
The needs of remote users are often different than those of other network users. Several common implementation schemes have evolved to meet the most sophisticated remote user
requirements. As a network professional, you may need to provide network connectivity to
remote users. To provide remote users with the functionality they need, you need to understand
the basics of remote networking.
Remote Networking
Deп¬Ѓnition:
Remote networking is a type of networking that enables users who are not at their
physical locations to access network resources. The remote computer uses speciп¬Ѓc protocols for connectivity and an established connection mechanism to connect to the
network. Remote networking can be used to enable a user to connect to a computer for
basic access, or it can be a full-service connection with the same functionality that the
user would expect to have at the office.
CompTIAВ® Network+В® (Exam N10-005)
320
Copyright В© Element K Corporation
LESSON 10
Remote Networking Limitations
The biggest limitations of remote networks are the available bandwidth, link latency,
and security.
Example:
Figure 10-1: Infrastructure in a remote networking environment.
Remote Access Networking
In remote access networking, a node uses a remote connection to connect to a network. Once
connected, the node can access resources and function as if it is on the same physical network.
There is a possibility of the connection being slower due to bandwidth constraints. The server
that provides remote access also provides security and authenticates users to access the network. All network traffic to and from the remote node passes through the server.
Remote Desktop Control
A remote desktop is a connection mode that enables users to access any network system from
their workstation and perform tasks on the remote system as if they were working locally.
Remote desktop control uses a special software package that enables a remote client to control
a host computer on the network, or run applications from a server. Once connected, the remote
client can send keyboard and mouse inputs and receive the resultant information on-screen.
Remote desktop control can be used on a WAN or on a local network. Remote desktop control
can be used for remote server administration and to enable help desk personnel to provide
remote assistance. Unless there are sufficient servers to balance the load, remote desktop control requires expensive centralized hardware and software to manage use and maintenance.
Remote Desktop Network Access
Remote desktop control can be used by the host computer as an access point to a
remote network. When a host computer is used to access a network, the host should be
a dedicated system.
Centralized Computing
Traditional models of centralized computing are based on a central server that has
attached terminals. Modern interpretations of centralized computing include remote
desktop, hosted and web-based applications, and вЂњthin clientвЂќ computing, where most
of the hardware resources reside on the server side.
Lesson 10: Remote Networking
321
Copyright В© Element K Corporation
LESSON 10
Beneп¬Ѓts of Remote Desktop Control
Remote desktop control has numerous beneп¬Ѓts for both administrators and end users.
Beneп¬Ѓt
Description
Centralized application
deployment and access
Applications are installed on the terminal servers and clients access the applications from their desktops. Applications are not installed on each
workstation, and have centralized upgradability and maintenance.
Multiple device support
Servers and clients can run on a wide variety of hardware conп¬Ѓgurations.
These can be different hardware or multiple devices such as low conп¬Ѓguration
PCs or thin clients.
Server administration
and maintenance
Allows an administrator to connect to a server remotely and perform administrative tasks using the GUI of the server.
Enhanced security
Implements basic and advanced encryption schemes.
RAS Servers
Remote Access is a feature that allows an administrator to access client systems from any location on the network. Remote Access Services (RAS) servers are available from many sources.
MicrosoftвЂ™s remote server implementation is called Routing and Remote Access Services
(RRAS). On Microsoft networks, using RRAS instead of a third-party remote access server
means that the user can dial in and authenticate with the same account as he or she uses at
office. With third-party remote access servers, there must be some mechanism in place to synchronize user names and passwords.
RAS Server Vendors
Microsoft, Apple, IBMВ®, and many other UNIX and Linux vendors offer remote access
server implementation either included with their server operating systems, or as separate software. In addition, there are several third-party software vendors that provide
remote access solutions, including Cisco, EMCВ®, PerleВ®, CitrixВ®, and PattonВ®.
RADIUS
Remote Authentication Dial-In User Service (RADIUS) is a protocol that enables a server to
provide standardized, centralized authentication for remote users. When a network contains
several remote access servers, you can conп¬Ѓgure them to be a RADIUS server and all of the
others as RADIUS clients. The RADIUS clients will pass all authentication requests to the
RADIUS server for veriп¬Ѓcation. User conп¬Ѓguration, remote access policies, and usage logging
can be centralized on the RADIUS server. RADIUS is supported by VPN servers, Ethernet
switches requiring authentication, WAPs, as well as other types of network devices.
CompTIAВ® Network+В® (Exam N10-005)
322
Copyright В© Element K Corporation
LESSON 10
Figure 10-2: The architecture of a RADIUS network.
RADIUS Implementation in Windows
In Windows Server 2008 R2, RADIUS implementation is accomplished through the
Network Policy server.
Diameter
Diameter is an authentication protocol that is an updated version of RADIUS and
improves on some of its features. Diameter is not backward-compatible with RADIUS,
but it does provide an upgrade path. Diameter is a stronger protocol that provides more
advanced features, but is not as widespread in its implementation due to the lack of
compatible products.
The name Diameter is a reference to the mathematical term that indicates that Diameter is twice as
good as RADIUS.
AAA
Authorization, Access Control, and AccountingвЂ”collectively referred to as AAA can
be implemented on a system for authentication as they use RADIUS and TACACS+ to
maintain a list of user names and passwords.
Lesson 10: Remote Networking
323
Copyright В© Element K Corporation
LESSON 10
ACTIVITY 10-1
Implementing RADIUS for Remote Access
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Open the Server Manager window.
Scenario:
You are a network administrator for OGC Financial Group, a mid-size company with a growing number of remote connectivity needs. You plan to implement RADIUS for remote
authentication, and you want to use it in tandem with wireless authentication for an added
layer of security on a wireless network that is mainly accessed by traveling employees. You
want to test RADIUS in a lab environment before deploying it in production. On a test RRAS
system, you will install a RADIUS server and reconп¬Ѓgure an RRAS server to use RADIUS
authentication.
Normally, in organizations, administrators disable/block ports above 1024 as a security measure. They selectively
enable ports above 1024 during the installation of the associated services that use the port number.
What You Do
How You Do It
1.
a. In the Server Manager window, expand
Roles, and then expand Network Policy
and Access Services. UnderNetwork
Policy and Access Services, right-click
Routing and Remote Access and choose
Properties.
View the current remote access
authentication methods.
b. In the Routing and Remote Access Properties dialog box, select the Security tab
and in the Authentication provider section, click Authentication Methods.
CompTIAВ® Network+В® (Exam N10-005)
324
Copyright В© Element K Corporation
LESSON 10
c. In the Authentication Methods dialog
box, observe the options selected by
default.
d. Click Cancel to close the Authentication
Methods dialog box.
e. Click Cancel to close the Routing and
Remote Access Properties dialog box.
Lesson 10: Remote Networking
325
Copyright В© Element K Corporation
LESSON 10
2.
Install the Network Policy and Access
Services.
a. In the Server Manager window, right-click
Network Policy and Access Services and
choose Add Role Services to open the
Add Role Services wizard.
b. In the Add Role Services wizard, on the
Select Role Services page, in the Role
Services section, check the Network
Policy Server check box and click Next.
c. Confirm what you are about to install and
then click Install.
d. Once the installation is complete, click
Close to close the Add Role Services wizard and complete the installation.
CompTIAВ® Network+В® (Exam N10-005)
326
Copyright В© Element K Corporation
LESSON 10
3.
Configure a RADIUS client.
a. In the Server Manager window, expand the
Network Policy and Access Services and
NPS (Local) objects.
b. Select the RADIUS Clients and Servers
folder.
c. In the middle pane, click Configure
RADIUS Clients.
d. In the Actions pane, in the RADIUS Clients section, click New.
e. In the New RADIUS Client dialog box, in
the Name and Address section, in the
Friendly name text box, click and type
My RADIUS Client
f.
In the Address (IP or DNS) section, click
Verify.
g. In the Verify Address dialog box, click
Resolve.
h. In the IP address list, select 192.168.1.XX
, where XX is the IP address of the system,
and click OK.
i.
In the Shared Secret section, select the
Generate option and then click Generate.
j.
Observe that in the Shared secret text
box, the key is automatically generated.
Click the warning message icon next to
the text box.
Lesson 10: Remote Networking
327
Copyright В© Element K Corporation
LESSON 10
k. Observe the text displayed as a tool tip
and click OK.
4.
Reconfigure the RRAS server to use
RADIUS authentication.
a. In the Server Manager window, under the
Network Policy and Access Services
object, select the NPS (Local) object.
b. In the Standard Configuration section,
from the drop-down list, select the
RADIUS server for 802.1X Wireless or
Wired Connections option.
c. Read the description and then click the
Configure 802.1X link.
d. In the Configure 802.1X dialog box, in
the Type of 802.1X connections section,
select the Secure Wireless Connections
option and click Next.
e. Verify that My RADIUS Client appears in
the RADIUS clients list, and click Next.
f.
On the Configure an Authentication
Method page, from the Type (based on
method of access and network configuration) drop-down list, select the
Microsoft: Secured password (EAPMSCHAP v2) option and click Next.
g. On the Specify User Groups page, click
Next.
h. On the Configure Traffic Controls page,
click Next and click Finish.
CompTIAВ® Network+В® (Exam N10-005)
328
Copyright В© Element K Corporation
LESSON 10
5.
Verify the RADIUS port settings.
a. In the Server Manager window, under the
Network Policy and Access Services
object, right-click the NPS (Local) object
and choose Properties.
b. In the Network Policy Server (Local)
Properties dialog box, select the Ports
tab.
c. Verify that 1812, the default port for
RADIUS, is listed in the Authentication
text field. After examining the other port
settings, click Cancel.
d. Close the Server Manager window.
Remote Control Protocols
There are several remote control protocols that can be used depending on the remote networking needs.
Remote Control Protocol
Description
Remote Desktop Protocol (RDP)
RDP is the backbone of MicrosoftвЂ™s Remote Desktop system. Its capabilities
include data encryption, remote audio and printing, access to local п¬Ѓles, and
redirection of the host computerвЂ™s disk drives and peripheral ports. In client
versions 6.1 and later, any application that can be accessed via the normal
remote desktop can serve as a standalone remote application.
The server component, the terminal server, is available on most Windows operating systems, except for Windows Vista Home Edition, and a desktop client is
available for most operating systems. The server listens on port 3389.
Virtual Network
Computing (VNC)
VNC is a platform-independent desktop sharing system. VNC client and server
software is available for almost any operating system (and for Java), so a VNC
viewer on a Linux system can connect to a VNC server on a Microsoft system
and vice versa.
VNC uses the Remote Frame Buffer (RFB) protocol, which allows the client
and server to determine the best version of RFB they can support during a session. VNC is not an inherently secure system, but does offer varying levels of
password and content encryption, depending on the implementation.
Independent Computing Architecture
(ICA)
The Citrix ICA protocol is a remote terminal protocol used by Citrix WinFrame
and Citrix Presentation Server software as an add-on to Microsoft Terminal Services. ICA enhances and expands on the core thin-client functionality found in
Terminal Services, and provides client support for additional protocols and services.
Lesson 10: Remote Networking
329
Copyright В© Element K Corporation
LESSON 10
Remote Control Protocol
Description
X Window system
The X Window system is a protocol that uses a client-server relationship to provide a GUI and input device management functionality to applications. Current
X Window systems are based on the X11 protocol and normally used on UNIXand Linux-based systems to display local applications. Because X is an open
cross-platform protocol and relies on client-server relationships, remote connections are often easy to implement.
Remote Desktop Implementations
Remote control networking solutions include Windows Remote DesktopВ® and Remote
AssistanceВ®, Symantec pcAnywhereВ®, GoToMyPCВ®, LogMeInВ®, WebEx PCNowВ®,
various VNC clients and servers, Citrix XenAppВ®, and Apple Remote DesktopВ®.
Microsoft Windows Terminal Services
The technologies formerly known as Terminal Services were renamed Remote Desktop
Services in Windows Server 2008 R2. Terminal Services is a client/server system that
enables multiple clients to run applications or manage a server remotely. Terminal Services provides client access to all Windows-compatible applications by opening a user
session on the Terminal Server. All application execution, data processing, and data
storage is handled by the Terminal Server.
MicrosoftвЂ™s terminal emulation software can be installed on almost any Windows operating system, from Windows NT to Windows 7. Even handheld PCs running Windows
CE can connect to a Terminal Server and run applications. Web-based access is also
available. The low demands on the client have led a lot of companies to deploy Terminal Services as a way of extending the life of their outdated computers. It is possible
for a Terminal Server to support hundreds of sessions simultaneously. Although the
upfront investment may be high, organizations spend less money in upgrading equipment.
Citrix ICA Clients
Because of CitrixвЂ™s digital independence, almost any device can be a Citrix client,
including PC desktops, net appliances, web browsers, or mobile devices. Net appliances are dedicated thin clients that have a keyboard, mouse, and video, but no hard
drives or CD-ROM drives. The net applianceвЂ™s OS is embedded in a ROM chip, it has
lower CPU power, and its job is to connect to a server. Even though it is a low-power
device, it can run any application on the server.
Web browser support is provided through the Citrix NFuseВ® web server application.
Websites that provide the applications are set up, and a client connects to the site with
any ActiveX-enabled browser. Like a thin client on a LAN, the applications run on the
web server and not on the browser. Mobile devices that use wireless connectivity services can access and run applications from laptops, cell phones, PDAs, or Windows
Mobiles.
CompTIAВ® Network+В® (Exam N10-005)
330
Copyright В© Element K Corporation
LESSON 10
ACTIVITY 10-2
Enabling Remote Desktop Connections
This is a simulated activity available on the CD-ROM that shipped with this course. The activity simulation can be
launched either directly from the CD-ROM by clicking the Interactives link and navigating to the appropriate one,
or from the installed data п¬Ѓle location by opening the C:\Data\Simulations\Lesson#\Activity# folder and doubleclicking the executable (.exe) п¬Ѓle.
Scenario:
You are a network administrator for OGC Advertising, a growing marketing company. In the
past, you used telnet to manage and troubleshoot servers remotely. Since the company has
grown, and you now have more dedicated servers, the decision has been made to manage and
troubleshoot remotely using Remote Desktop, which is more secure than telnet.
Additionally, since Remote Desktop allows for creating and accessing п¬Ѓles on the remote computer, accessing п¬Ѓles on the server is more efficient. You now do not need to keep FTP ports
open to transfer individual п¬Ѓles. In this activity, you will enable Remote Desktop Connections
on your workstation to connect to a partnerвЂ™s computer, which is simulating a dedicated п¬Ѓle
server running Windows Server 2008 R2.
What You Do
How You Do It
1.
a. Browse to the C:\Data\Simulations\
Lesson10\Activity10-2 folder.
Enable remote desktop connections.
b. Double-click the executable file.
c. In the Open File - Security Warning message box, click Run.
d. Follow the on-screen steps for the simulation.
e. Close the C:\Data\Simulations\Lesson10\
Activity10-2 folder.
Lesson 10: Remote Networking
331
Copyright В© Element K Corporation
LESSON 10
TOPIC B
Remote Access Networking
Implementations
In the previous topic, you identiп¬Ѓed remote access networking. The different remote network
architectures can be used for different implementations of remote networks. In this topic, you
will identify various remote access networking implementations.
For many, connecting to a remote network while on the move is a way of life. From
telecommuters to traveling sales representatives to a manager attending an annual conference,
these remote users need a reliable way to access network services when they are not in an
office environment. As a network professional, you need to recognize the components commonly used in remote access networking so that you can support your remote users.
Remote Access Protocols
Deп¬Ѓnition:
A remote access protocol enables a user to access a remote access server and transfer
data. Remote access protocols can provide direct dial-in connections via modems, or
they can provide connections via ISPs and the Internet. There are various remote
access protocols such as PPP, PPPoE, and EAP that provide remote access.
Example:
Figure 10-3: A remote access protocol environment.
CompTIAВ® Network+В® (Exam N10-005)
332
Copyright В© Element K Corporation
LESSON 10
PPP
The Point-to-Point Protocol (PPP) is a remote networking protocol that works on the Data
Link layer of the TCP/IP protocol suite. It is used to send IP datagrams over serial point-topoint links. It can be used in synchronous and asynchronous connections. PPP can dynamically
conп¬Ѓgure and test remote network connections, and is often used by clients to connect to networks and the Internet. It also provides encryption for passwords, paving the way for secure
authentication of remote users. To log on to a remote session via PPP, you need to enable a
remote authentication protocol.
The Point-to-Point Protocol over Ethernet (PPPoE) and Point-to-Point Protocol over ATM
(PPPoA) are more recent PPP implementations used by many DSL broadband Internet connections.
SLIP is a legacy remote access protocol used for sending IP data streams over serial lines such as modem or
phone connections. In Windows Server 2008 R2, SLIP is automatically upgraded by the NOS to PPP.
PPP Variants
There are three commonly used variants of PPP: the PPPoE, Extensible Authentication Protocol (EAP), and Protected Extensible Authentication Protocol (PEAP).
Variant
Description
PPPoE
A standard that provides the features and functionality of PPP to DSL connections that
use Ethernet to transfer signals from a carrier to a client. In addition, it contains a discovery process that determines a clientвЂ™s Ethernet MAC address prior to establishing a
connection.
EAP
A protocol which is an extension of PPP and provides support for additional authentication methods, such as tokens, smart cards, and certiп¬Ѓcates.
PEAP
A protocol that secures EAP by creating an encrypted channel between a remote client
and a server. PEAP can also be used with Microsoft Challenge Handshake Authentication
Protocol v2 (MS-CHAPv2) to strengthen the protocolвЂ™s password authentication.
Remote Access Authentication
To authenticate a remote session connection, you need to perform several steps.
Figure 10-4: Steps in the remote access authentication process.
Lesson 10: Remote Networking
333
Copyright В© Element K Corporation
LESSON 10
Step
Description
Step 1: Session initiation
A user initiates a session using a remote computer.
Step 2: Connection request
The remote computer requests a connection to a remote access
server so that it can connect to another computer.
Step 3: Link establishment
The remote access server acknowledges the connection request, and
establishes the physical link between the two computers.
Step 4: Client authentication
The remote access server requires the client to authenticate itself by
using a remote authentication protocol. If the client does not agree
to provide the requested authentication data, the server refuses to
create a connection and the physical link is dropped. If the client
agrees to send the authentication data, the server establishes a connection and authenticates the client.
Step 5: Authentication credentials
communications
The server and client use the agreed-upon authentication protocol to
communicate authentication credentials. If the server does not
accept the authentication credentials provided by the client, the
server closes the connection and drops the physical link. If the
server accepts the authentication credentials provided by the client,
the server allows the client to access resources.
Web-Based Remote Access
Web-based remote access implementations provide access to services and data via web browsers. A well-deployed web-based service allows clients to access web-based applications and
data without any additional software installed on their system. However, proper security
mechanisms should be in place when you use these implementations. Web-based remote access
also allows administrators to manage application servers from remote locations. Web-based
remote access applications require a higher conп¬Ѓguration of web servers when clients access
the server.
Figure 10-5: Web-based remote access using a web browser.
CompTIAВ® Network+В® (Exam N10-005)
334
Copyright В© Element K Corporation
LESSON 10
Web-Based Access in Windows
In Windows Server 2008 R2, Windows XP Professional, and Windows 7, web-based
remote access is available through the Remote Desktop Web Connection (RDWC). The
remote machine requires Internet Explorer 7 or higher, while the web server requires
RDWC to be installed and running. RDWC is a component of IIS and is included with
Windows Server and XP Professional, but must be downloaded separately for Windows
7.
Another web-based access feature in Windows Server 2008 R2 is called Web Interface
For Remote Administration. Designed for remote management of application servers, it
enables administrators to access a server from any computer running Internet Explorer
7 or higher. On the application server, which cannot be a domain controller, Web Interface For Remote Administration must be installed. Windows Server 2008 R2 can make
use of the Remote Server Administration tools available for Windows 7.
ACTIVITY 10-3
Identifying Remote Access Networking
Implementations
Scenario:
In this activity, you will identify various remote access networking implementations.
What You Do
1.
How You Do It
EAP is an extension of:
a) PEAP
b) CHAP
c) PAP
d) PPP
2.
Which of these statements about PPP are true?
a) Sends IP datagrams over serial point-to-point links.
b) Works on the Physical layer of the TCP/IP protocol suite.
c) Used for both asynchronous and synchronous connections.
d) Provides secure authentication for remote users.
3.
What is the correct sequence of steps in the Remote Access Authentication Process?
Authentication credentials communication
Client authentication
Link establishment
Connection request
Session initiation
Lesson 10: Remote Networking
335
Copyright В© Element K Corporation
LESSON 10
4.
Which remote access protocol is used with DSL connections?
a) PEAP
b) PPP
c) PPPoE
d) EAP
TOPIC C
Virtual Private Networking
In the previous topic, you identiп¬Ѓed remote access networking protocols and implementations.
In some organizations, the sheer number of remote users makes the implementation of traditional remote access networking cost-prohibitive. This is where a Virtual Private Network
(VPN) comes into the picture. In this topic, you will identify the major components of VPN
implementations.
Although standard dial-up implementations can still be found in some network environments,
other considerations, such as security and the number of remote users to be supported, require
additional measures to provide remote connections. When organizations opt to take advantage
of public networks such as the Internet, the issue of securing data transmissions becomes critical. To counter the security risks associated with public networks, organizations implement a
VPN within the public network to ensure secure communications. As a network professional,
you need to recognize the components of VPN implementations to support remote users.
VPNs
Deп¬Ѓnition:
A Virtual Private Network (VPN) is a private network that is conп¬Ѓgured by tunneling
through a public network such as the Internet. Because tunneling is used to encapsulate
and encrypt data, VPNs ensure that connections between endpoints, such as routers,
clients, and servers are secure. To provide VPN tunneling, security, and data encryption
services, special VPN protocols are required.
CompTIAВ® Network+В® (Exam N10-005)
336
Copyright В© Element K Corporation
LESSON 10
Example:
Figure 10-6: VPN infrastructure makes a private network secure.
Example:
Secure Socket Layer VPNs
A Secure Socket Layer VPN (SSL VPN) is a VPN format that works with a web
browserвЂ”without needing the installation of a separate client. SSL ensures that the
connection can be made only by using HTTPS instead of HTTP. This format works
well in schools and libraries where easy access is required but security it still a concern.
Tunneling
Deп¬Ѓnition:
A tunnel is a logical path through the network that appears like a point-to-point connection. Tunneling is a data transport technique in which a data packet from one
protocol, called the passenger protocol, is transferred inside the frame or packet of
another protocol, called the carrier protocol. Tunneling enables data from one network
to pass from one endpoint of a tunnel to the other through the infrastructure of another
network. The carrier protocol can encapsulate and route nonroutable passenger protocols, or it can provide additional security by hiding passenger data from the carrier
network.
Lesson 10: Remote Networking
337
Copyright В© Element K Corporation
LESSON 10
Example:
Figure 10-7: Tunneling through a network.
Tunnel Types
Essentially, there are two tunnel types: voluntary and compulsory.
вЂў
Voluntary tunnels are created between endpoints at the request of a client. When a
user runs a software application that supports encrypted data communications, the
client establishes an encrypted tunnel to the other end of the communication session, whether it is on a local network or the Internet.
вЂў
Compulsory tunnels are established by a WAN carrier with no involvement with
client endpoints. Clients send data between endpoints, and all data is tunneled
without affecting the client. Compulsory tunnels can be in place permanently
(static), or they can be put in place based on the data or client type (dynamic).
VPN Types
VPNs can be one of three types depending on the network: Access, Intranet, and Extranet.
VPN Type
Description
Access VPNs
Provides remote access to single users via dial-up, ISDN, xDSL, or cable
modem connections.
CompTIAВ® Network+В® (Exam N10-005)
338
Copyright В© Element K Corporation
LESSON 10
VPN Type
Description
Intranet VPNs
Connects sections of a network, such as remote offices tying into a corporate headquarters.
Extranet VPNs
Connects networks belonging to different companies for the purposes of
sharing resources.
VPNs can also be classiп¬Ѓed by their implementations.
Implementation
Description
Hardware-based
Uses hardware such as encrypting routers.
Firewall-based
Uses a п¬ЃrewallвЂ™s security mechanisms.
Software-based
Uses software when VPN endpoints are not controlled by the same organization.
Lesson 10: Remote Networking
339
Copyright В© Element K Corporation
LESSON 10
Advantages of VPNs
The two biggest reasons that most organizations implement VPNs are cost savings and data
conп¬Ѓdentiality. The cost of maintaining a VPN is generally lower than other remote access
technologies. For instance, if a remote access technology depends on long-distance or toll-free
calls, an organizationвЂ™s communication expenditure can become very high. Another reason for
implementing VPNs is its versatility. One VPN endpoint connected to a T1 or T3 line through
the service provider can accommodate hundreds of simultaneous connections from any type of
client using any type of connection.
VPN Data Encryption
In most VPNs, data encryption is accomplished by either MPPE or IPSec.
Encryption Method
Description
MPPE
Microsoft Point-to-Point Encryption (MPPE) is often used with Point-to-Point
Tunneling Protocol (PPTP). It provides both strong (128-bit key) and standard (40- or 56-bit key) data encryptions. MPPE requires the use of
MS-CHAP, MS-CHAPv2, or EAP remote authentication, because the keys
used for MPPE encryption are derived from the authentication method.
IPSec
IPSec in Tunnel mode is often used with Layer Two Tunneling Protocol
(L2TP). Data encryption is accomplished by IPSec, which uses Data Encryption Standard (DES) or Triple DES (3DES) encryption to provide data
conп¬Ѓdentiality. IPSec can also be used on its own to provide both tunneling
and encryption of data.
VPN Concentrators
Deп¬Ѓnition:
A VPN concentrator is a device that incorporates advanced encryption and authentication methods to handle a large number of VPN tunnels. It is geared speciп¬Ѓcally
towards secure remote access or site-to-site VPNs. VPN concentrators provide high
performance, high availability, and impressive scalability.
CompTIAВ® Network+В® (Exam N10-005)
340
Copyright В© Element K Corporation
LESSON 10
Example:
Figure 10-8: A VPN concentrator used in a corporate environment.
VPN Connection Models
VPNs can be connected in one of two VPN connection models: site-to-site or client-to-site.
Connection Model
Description
Site-to-site
In the site-to-site VPN connection model, each node on the network is connected to a remote network that may be separated by public or other unsecured
networks. Site-to-site VPNs may be either open or closed. In case of an open
site-to-site VPN connection, the exchange of data among nodes can be unsecured. In case of a closed site-to-site VPN connection, data can be
communicated only using the VPN in a secure mode. In both types of VPNs,
IPSec is implemented to ensure secure data transactions.
Client-to-site
In the client-to-site VPN connection model also, there are two types of
networksвЂ”open and closed. In the case of an open VPN, the path between the
end node and the IPSec gateway is not secured. In the case of a closed VPN,
the path between the end node and the IPSec gateway is secured.
Onsite vs. Offsite
VPNs can also connect offsite to the virtual network components of VLANs or to
other virtual networks that are onsite. The offsite components can also include proxy or
reverse proxy servers.
Lesson 10: Remote Networking
341
Copyright В© Element K Corporation
LESSON 10
ACTIVITY 10-4
Verifying VPN Conп¬Ѓguration on RRAS
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
1. Open the Server Manager window.
2.
Verify that RRAS is running.
Scenario:
In this activity, you will verify VPN conп¬Ѓguration on RRAS.
CompTIAВ® Network+В® (Exam N10-005)
342
Copyright В© Element K Corporation
LESSON 10
What You Do
How You Do It
1.
a. In the Server Manager window, in the left
pane, expand Roles, expand the Network
Policy and Access Services object,
expand the Routing and Remote Access
object, and select the Ports object.
Verify that VPN support is enabled on
the WAN Miniport that uses PPTP.
b. In the Actions pane, click More Actions
and then choose Properties.
c. In the Ports Properties dialog box, select
the WAN miniport that uses PPTP and
click Configure.
d. In the Configure Device - WAN Miniport
(PPTP) dialog box, verify that the Remote
access connections (inbound only) and
Demand-dial routing connections
(inbound and outbound) check boxes are
checked and click OK.
Lesson 10: Remote Networking
343
Copyright В© Element K Corporation
LESSON 10
2.
Verify that VPN support is enabled on
the WAN Miniport that uses L2TP.
a. Select the WAN miniport that uses L2TP
and click Configure.
b. In the Configure Device - WAN Miniport
(L2TP) dialog box, verify that Remote
Access Connections (inbound only) and
Demand-dial routing connections
(inbound and outbound) check boxes are
checked and click OK.
c. Verify that the Used By column for the
two ports displays RAS/Routing.
d. In the Ports Properties dialog box, click
OK.
e. Close the Server Manager window.
CompTIAВ® Network+В® (Exam N10-005)
344
Copyright В© Element K Corporation
LESSON 10
TOPIC D
VPN Protocols
In the previous topic, you identiп¬Ѓed the basic characteristics of VPNs. VPNs have additional
data packet formatting and security requirements for which it uses speciп¬Ѓc protocols. In this
topic, you will identify the protocols that are used on VPNs.
When using the public network as a channel for communication, organizations need to deploy
additional layers of security to mitigate threats and attacks. VPNs have in-built protocols to
address this security risk because one of the key beneп¬Ѓts to implementing a VPN is the security provided by the protocols that it uses. As a network professional, you should be aware of
VPN protocols and their characteristics. This background information will ensure that you will
be able to implement VPNs successfully.
PAP
The Password Authentication Protocol (PAP) is a remote-access authentication method that
sends client IDs and passwords as cleartext. It is generally used when a remote client is connecting to a non-Windows PPP server that does not support password encryption. When the
server receives a client ID and password, it compares them to its local list of credentials. If a
match is found, the server accepts the credentials and allows the remote client to access
resources. If no match is found, the connection is terminated.
Figure 10-9: PAP authentication of a client by a server.
CHAP
The Challenge Handshake Authentication Protocol (CHAP) is a RAS protocol that uses an
encryption method to transmit authentication information. Generally used to connect to nonMicrosoft servers, CHAP was developed so that passwords would not have to be sent in
plaintext. CHAP uses a combination of Message Digest 5 (MD5) hashing and a challengeresponse mechanism, and authenticates without sending passwords as plaintext over the
network.
MS-CHAP is a Microsoft extension of CHAP that is speciп¬Ѓcally designed for authenticating
remote Windows workstations. MS-CHAPv2 provides all the functionality of MS-CHAP, and
in addition provides security features such as two-way authentication and stronger encryption
keys.
CHAP does not support PAP or Secure PAP unencrypted authentication.
Lesson 10: Remote Networking
345
Copyright В© Element K Corporation
LESSON 10
Figure 10-10: CHAP between a remote client and server.
The Challenge-Response Authentication Process
In the challenge-response authentication process used in CHAP, the password is never sent
across the network. The challenges that are tokens are encrypted.
Figure 10-11: Steps in the CHAP process.
Step
Description
Step 1: Client requests a connection
A remote client requests a connection to a RAS.
Step 2: Server sends the challenge sequence
The remote server sends a challenge sequence, which is usually a
random value. This is to receive an acknowledgment from the client.
Step 3: Client encrypts the challenge sequence
The remote client uses its password as an encryption key to encrypt
the challenge sequence and sends the modiп¬Ѓed sequence to the
server.
Step 4: Server encrypts the challenge sequence and compares the
results
The server encrypts the original challenge sequence with the password stored in its local credentials list and compares the results with
the modiп¬Ѓed sequence received from the client.
вЂў If the two sequences do not match, the server closes the connection.
вЂў If the two sequences match, the server allows the client to access
resources.
CompTIAВ® Network+В® (Exam N10-005)
346
Copyright В© Element K Corporation
LESSON 10
TACACS+
Terminal Access Controller Access Control System (TACACS) and TACACS Plus (TACACS+)
protocols provide centralized authentication and authorization services for remote users.
TACACS includes process-wide encryption for authentication while RADIUS encrypts only
passwords. TACACS utilizes TCP rather than UDP and supports multiple protocols. Extensions
to the TACACS protocols exist, such as CiscoвЂ™s TACACS+ and XTACACS.
Features of TACACS+
TACACS+, which is CiscoвЂ™s proprietary product, uses TCP port 49 and also supports
multifactor authentication. TACACS+ is considered more secure and more scalable
than RADIUS because it accepts login requests and authenticates the access credentials
of the user. TACACS+ is not compatible with TACACS because it uses an advanced
version of the TACACS algorithm.
PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a layer 2 Microsoft VPN protocol that
increases the security of PPP by providing tunneling and data encryption for PPP packets. It
uses the same authentication methods as PPP, and is the most widely supported VPN protocol
among older Windows clients. Deployed over public, unsecured networks such as the Internet,
PPTP encapsulates and transports multiprotocol data traffic over IP networks.
L2TP
The Layer Two Tunneling Protocol (L2TP) is a protocol that works on the Internet and combines the capabilities of PPTP and Layer 2 Forwarding (L2F) to enable the tunneling of PPP
sessions across a variety of network protocols, such as IP, Frame Relay, or ATM. L2TP was
speciп¬Ѓcally designed to provide tunneling and security interoperability for client-to-gateway
and gateway-to-gateway connections. L2TP does not provide any encryption on its own and
L2TP packets appear as IP packets because, like IP packets, they also have a header, footer,
and CRC. As a result, L2TP employs IPSec as the transport mode for authentication, integrity,
and conп¬Ѓdentiality.
L2TP has wide vendor support because it addresses the IPSec shortcomings of client-to-gateway and gatewayto-gateway connections.
SSTP
Windows Server 2008, Windows Server 2008 R2, Windows XP SP3, and Windows 7
support a new tunneling protocol, Secure Socket Tunneling Protocol (SSTP). SSTP
uses the HTTP over SSL protocol. It encapsulates a data packet from IP with an SSTP
header. The IP packet and SSTP header are encrypted by SSL. An IP header containing
the destination addresses is then added to the packet.
Lesson 10: Remote Networking
347
Copyright В© Element K Corporation
LESSON 10
ACTIVITY 10-5
Identifying VPN Protocols
Scenario:
In this activity, you will identify the characteristics of VPN protocols.
1.
Which statements are true of PAP?
a) Encrypts user credentials.
b) Connects a remote client to a non-Windows PPP server.
c) Updates its local list of credentials when it receives a new set of credentials on the
server.
d) Compares credentials from a remote client with local credentials to allow access to
resources.
2.
Which of these is an encrypted authentication protocol that is used to connect to nonMicrosoft servers?
a) MS-CHAP
b) PPTP
c) CHAP
d) PAP
3.
Which statements are true of CHAP?
a) Sends passwords as plaintext.
b) Used to connect to non-Microsoft servers.
c) Does not send passwords as plaintext.
d) Uses MD5 hashing.
4.
Match the protocol with its description.
PPTP
a.
TACACS+
b.
TACACS
c.
CHAP
d.
L2TP
e.
Uses a challenge response mechanism.
Encapsulates and transports
multiprotocol data traffic.
Performs process-wide encryption
using TCP.
Combines the capabilities of PPTP
and L2F.
Supports multifactor authentication.
CompTIAВ® Network+В® (Exam N10-005)
348
Copyright В© Element K Corporation
LESSON 10
5.
Arrange the steps in the CHAP process in sequence.
The remote client requests a connection to RAS.
The remote client uses its password as encryption key and sends the modified challenge sequence to the server.
The remote server sends a challenge response.
RAS encrypts the challenge sequence with the password stored in its local credential
list.
Lesson 10 Follow-up
In this lesson, you identiп¬Ѓed the components of a remote network implementation. As a network professional, you will need to understand the technologies involved in remote network
implementations so that you can implement them on your network to effectively support
remote users.
1.
What are the solutions that you can use for remote networking?
2.
Which of the remote networking protocols are you most likely to encounter in your
network?
Lesson 10: Remote Networking
349
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
350
Copyright В© Element K Corporation
LESSON 11
LESSON 11
Lesson Time
2 hour(s), 20 minutes
System Security
In this lesson, you will identify the major issues and methods to secure systems on a network.
You will:
вЂў
Describe basic security concepts for local computers.
вЂў
Identify various system security tools.
вЂў
Identify different methods used for authentication on a network.
вЂў
Identify major methods and technologies for data encryption.
Lesson 11: System Security
351
Copyright В© Element K Corporation
LESSON 11
Introduction
You have identiп¬Ѓed the basic components and concepts for implementing a network. A networkвЂ™s security is only as strong as the security of its individual systems. In this lesson, you
will identify the major issues and technologies involved in local system security.
Before connecting individual computers to the network, you need to ensure that the computers
are secured using proper security mechanisms. This level of security will help you overcome
any potential issues that might occur otherwise. Unsecured systems can result in compromised
data and, ultimately, lost revenue. Identifying the appropriate steps and measures you can
implement to protect your systems and keeping your resources and revenue safe from potential
attacks are a key aspect of securing systems on your network.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂ”
вЂў
Topic C:
вЂ”
вЂў
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
5.3 Explain methods of user authentication.
Topic D:
вЂ”
5.1 Given a scenario, implement appropriate wireless security measures.
вЂ”
5.3 Explain methods of user authentication.
TOPIC A
Computer Security Basics
In earlier lessons, you learned about the design and implementation of different types of networks. Irrespective of the type of network you implement, securing the network becomes a top
priority. Securing individual computers is the п¬Ѓrst step toward securing the entire network. In
this topic, you will identify the security concepts that you will need to know as a Network+
technician.
Just as the construction of a building is started with bricks and mortar, each security implementation starts with a series of fundamental building blocks. No matter what the п¬Ѓnal result
is, you will always start with the same fundamentals. As a networking professional, it is part
of your responsibility to understand these fundamental concepts so that you can ensure appropriate security levels in your organization.
Security Factors
Most security systems rely on four major factors to achieve security goals:
вЂў
Authorization is the process of determining what rights and privileges a particular entity
has.
вЂў
Access control is the process of determining and assigning privileges to various resources,
objects, or data.
вЂў
Accountability is the process of determining who to hold responsible for a particular activity or event, such as a logon.
CompTIAВ® Network+В® (Exam N10-005)
352
Copyright В© Element K Corporation
вЂў
LESSON 11
Auditing or accounting is the process of tracking and recording system activities and
resource access.
Figure 11-1: System security factors
Least Privilege
Deп¬Ѓnition:
The principle of least privilege dictates that users and software should only have the
minimal level of access that is necessary for them to perform their duties. This level of
minimal access includes facilities, computing hardware, software, and information.
Where a user or system is given access, that access should conform to the least privilege level required to perform the necessary task.
Example:
Figure 11-2: Least privilege allows appropriate levels of access to users.
Privilege Bracketing
The network or security administrator can use privilege bracketing to allow privileges
only when needed, and then revoke them as soon as the user п¬Ѓnishes the task or the
need has passed.
Lesson 11: System Security
353
Copyright В© Element K Corporation
LESSON 11
Non-Repudiation
Non-repudiation is the goal of ensuring that data remains associated with the party that creates
it or sends a transmission with that data. It is supplemental to the CIA triad. You should be
able to independently verify the identity of the sender of a message, and the sender should be
responsible for the message and its data.
The CIA Triad
Information security seeks to address three speciп¬Ѓc principles: conп¬Ѓdentiality, integrity,
and availability. This is called the CIA triad. If one of the principles is compromised,
the security of the organization is threatened.
Principle
Description
Conп¬Ѓdentiality
This is the fundamental principle of keeping information and communications private and protecting it from unauthorized access.
Conп¬Ѓdential information includes trade secrets, personnel records,
health records, tax records, and military secrets.
Integrity
This is the property of keeping organizational information accurate,
free of errors, and without unauthorized modiп¬Ѓcations.
For example, in the 1980s movie War Games, actor Matthew Broderick
was seen modifying his grades early in the movie. This means that the
integrity of his grade information was compromised by unauthorized
modiп¬Ѓcation.
Availability
This is the fundamental principle of ensuring that systems operate continuously and that authorized persons can access the data that they
need.
Information available on a computer system is useless unless users can
get to it. Consider what would happen if the Federal Aviation AdministrationвЂ™s air traffic control system failed. Radar images would be
captured but not distributed to those who need the information.
Threats
Deп¬Ѓnition:
In the realm of computer security, a threat is any event or action that could potentially
result in the violation of a security requirement, policy, or procedure. Regardless of
whether a violation is intentional or unintentional, malicious or not, it is considered a
threat. Potential threats to computer and network security include:
вЂў
Unintentional or unauthorized access or changes to data.
вЂў
Interruption of services.
вЂў
Interruption of access to assets.
вЂў
Damage to hardware.
вЂў
Unauthorized access or damage to facilities.
Example:
An email containing sensitive information that is mistakenly sent to the wrong person
would be considered a potential threat, even though the misdirection of the information
was not intentional.
CompTIAВ® Network+В® (Exam N10-005)
354
Copyright В© Element K Corporation
LESSON 11
Figure 11-3: Threats cause a violation of security policies and procedures.
Vulnerabilities
Deп¬Ѓnition:
At the most basic level, a vulnerability is any condition that leaves a system open to
attack. Vulnerabilities can come in a wide variety of forms, including:
вЂў
Improperly conп¬Ѓgured or installed hardware or software.
вЂў
Bugs in software or operating systems.
вЂў
Misuse of software or communication protocols.
вЂў
Poorly designed networks.
вЂў
Poor physical security.
вЂў
Insecure passwords.
вЂў
Design п¬‚aws in software or operating systems.
вЂў
Unchecked user input.
Example:
Figure 11-4: A system open to attack.
Attacks
Deп¬Ѓnition:
In the realm of computer security, an attack is a technique that is used to exploit a
vulnerability in any application on a computer system without the authorization to do
so. Attacks on a computer system and network security include:
Lesson 11: System Security
355
Copyright В© Element K Corporation
LESSON 11
вЂў
Physical security attacks
вЂў
Network-based attacks
вЂў
Software-based attacks
вЂў
Social engineering attacks
вЂў
Web application-based attacks
Example:
Figure 11-5: Types of attacks.
Risks
Deп¬Ѓnition:
As applied to information systems, risk is a concept that indicates exposure to the
chance of damage or loss. It signiп¬Ѓes the likelihood of a hazard or threat occurring. In
information technology, risk is often associated with the loss of a system, power, or
network, and other physical losses. Risk also affects people, practices, and processes.
Example:
A disgruntled former employee is a threat. The amount of risk this threat represents
depends on the likelihood that the employee will access their previous place of business and remove or damage data. It also depends on the extent of harm that could
result.
Risk Factors
Risk is the determining factor when looking at information systems security. If an
organization chooses to ignore risks to operations, it could suffer a catastrophic outage
that would limit its ability to survive.
CompTIAВ® Network+В® (Exam N10-005)
356
Copyright В© Element K Corporation
LESSON 11
Unauthorized Access
Deп¬Ѓnition:
Unauthorized access is any type of network or data access that is not explicitly
approved by an organization. It can be a deliberate attack by an outsider, a misuse of
valid privileges by an authorized user, or it can be inadvertent. Unauthorized access
does not necessarily result in data loss or damage, but it could be the п¬Ѓrst step in
mounting a number of attacks against the network.
Example:
Figure 11-6: Unauthorized users can mount a number of attacks against a network.
Data Theft
Deп¬Ѓnition:
Data theft is a type of attack in which an attacker uses unauthorized access to obtain
protected network information. The attacker can use stolen credentials to authenticate
to a server and read data stored in п¬Ѓles. Or, the attacker can steal data in transit on the
network media by using a hardware- or software-based packet sniffer, which is a device
or program that monitors network communications and captures data.
Lesson 11: System Security
357
Copyright В© Element K Corporation
LESSON 11
Example:
Figure 11-7: An unauthorized user obtaining protected network information.
Hackers and Attackers
Deп¬Ѓnition:
Hackers and attackers are related terms for individuals who have the skills to gain
access to computer systems through unauthorized or unapproved means. Originally, a
hacker was a neutral term for a user who excelled at computer programming and computer system administration. вЂњHackingвЂќ into a system was a sign of technical skill and
creativity that also became associated with illegal or malicious system intrusions.
вЂњAttackerвЂќ is a term that always represents a malicious system intruder.
The term cracker refers to an individual who breaks encryption codes, defeats software copy protections, or specializes in breaking into systems. The term вЂњcrackerвЂќ is sometimes used to refer to a
hacker or an attacker.
Example:
Figure 11-8: A hacker and an attacker.
White Hats and Black Hats
A white hat is a hacker who discovers and exposes security п¬‚aws in applications and
operating systems so that manufacturers can п¬Ѓx them before they become widespread
problems. The white hat often does this on a professional basis, working for a security
organization or a system manufacturer. This is sometimes called an вЂњethical hack.вЂќ
CompTIAВ® Network+В® (Exam N10-005)
358
Copyright В© Element K Corporation
LESSON 11
A black hat is a hacker who discovers and exposes security vulnerabilities for п¬Ѓnancial
gain or for some malicious purpose. While the black hats might not break directly into
systems the way attackers do, widely publicizing security п¬‚aws can potentially cause
п¬Ѓnancial or other damage to an organization.
People who consider themselves white hats also discover and publicize security problems, but without the organizationвЂ™s knowledge or permission. They consider
themselves to be acting for the common good. In this case, the only distinction
between a white hat and a black hat is one of intent. There is some debate over
whether this kind of unauthorized revelation of security issues really serves the public
good or simply provides an avenue of attack.
White hats and black hats get their names from characters in old Western movies: the
good guys always wore white hats, while the bad guys wore black hats.
ACTIVITY 11-1
Discussing Computer Security
Scenario:
In this activity, you will discuss computer security basics.
1.
What are applicable forms of vulnerabilities?
a) Improperly configured software
b) Misuse of communication protocols
c) Poor physical security
d) Lengthy passwords with a mix of characters
2.
Which of these describes the concept of least privilege?
a) End-user jobs and software access should be restricted so that no one wields too
much administrative power over the network.
b) End users should at least hold administrative privileges over their local workstation.
c) Technological and physical access should be granted only when it is needed, and then
revoked as soon as the task or need has ended.
d) End users should be given the minimal level of technological and physical access that
is required for them to perform their jobs.
3.
A biometric handprint scanner is used as part of a system for granting access to a facility. Once an identity is verified, the system checks and confirms that the user is
allowed to leave the lobby and enter the facility, and the electronic door lock is
released. This is an example of which of the security factors?
a) Accountability
b) Authorization
c) Access control
d) Auditing
Lesson 11: System Security
359
Copyright В© Element K Corporation
LESSON 11
4.
Which security factor tracks system activities?
a) Accountability
b) Access control
c) Auditing
d) Authorization
5.
At the end of the day, security personnel can view electronic log files that record the
identities of everyone who entered and exited the building along with the time of day.
This is an example of:
a) Accountability
b) Authorization
c) Access control
d) Auditing
6.
Match each security control with its description.
Accountability
Authorization
Access control
Auditing
a.
Determining the individual responsible for a particular activity or event.
b. Tracking system events.
c. Determining rights and privileges for
an individual.
d. Assigning rights and privileges on
objects.
TOPIC B
System Security Tools
In the previous topic, you identiп¬Ѓed the basic security concepts. One of the components of a
total security plan is implementing system-level security. In this topic, you will identify various
system security tools.
As part of your organizationвЂ™s quest to ensure security for its users, systems, and data, you will
implement security measures using different tools and on different components of your network. You will need to secure from the inside out as well as from the outside in. Conп¬Ѓguring
appropriate security on local system components secures from the inside out, and is an important piece of an overall security plan.
CompTIAВ® Network+В® (Exam N10-005)
360
Copyright В© Element K Corporation
LESSON 11
Permissions
Deп¬Ѓnition:
A permission is a security setting that determines the level of access a user or group
account has to a particular resource. Permissions can be associated with a variety of
resources, such as п¬Ѓles, printers, shared folders, and network directory databases. Permissions can typically be conп¬Ѓgured to allow different levels of privileges, or to deny
privileges to users who should not access a resource.
Example:
Figure 11-9: Permissions determine the user access level.
Users and Groups
Rights and permissions can be assigned to individual user accounts. However, this is
an inefficient security practice, because so many permission assignments must be duplicated for users with similar roles and because individual usersвЂ™ roles and needs can
change frequently. It is more efficient to create groups of users with common needs,
and assign the rights and permissions to the user groups. As the needs of individual
users change, the users can be placed in groups with the appropriate security conп¬Ѓguration.
UNIX Permissions
Because UNIX and related systems are multiuser by nature, there is a series of permissions associated with all п¬Ѓles and directories. There are three types of permissions.
Permission
Allows the User To
r (read)
вЂў View п¬Ѓle content.
вЂў See what is in the directory.
w (write)
вЂў Modify п¬Ѓle contents.
вЂў Create and delete directory contents.
Lesson 11: System Security
361
Copyright В© Element K Corporation
LESSON 11
Permission
Allows the User To
x (execute)
вЂў Run the п¬Ѓle (if it is an executable program and is combined with read).
вЂў Move into the directory. When combined
with read, you can also see a long listing
of the contents of the directory.
NTFS Permissions
On Windows operating systems, п¬Ѓle-level security is supported on drives that are formatted to
use the Windows NT File System (NTFS). These permissions can be applied either to folders
or to individual п¬Ѓles. NTFS permissions on a folder are inherited by the п¬Ѓles and subfolders
within it. There are several levels of NTFS permissions, which can determine, for example,
whether users can read п¬Ѓles or run applications; write to existing п¬Ѓles; and modify, create, or
delete п¬Ѓles.
Group Policy
Deп¬Ѓnition:
A group policy is a centralized account management feature available for Active Directory on Windows Server systems. A group policy can be used to control certain
desktop workstation features within an enterprise, such as specifying that all workstations display the company logo as their wallpaper, or that the default browser should
have pre-loaded settings. It is also used to control security features, such as limiting
the desktop icons that get displayed, granting permission to access certain servers but
not others, or totally locking down a desktop.
Example:
Figure 11-10: A group policy controls certain desktop workstation features.
CompTIAВ® Network+В® (Exam N10-005)
362
Copyright В© Element K Corporation
LESSON 11
ACTIVITY 11-2
Testing Permissions
This is a simulated activity available on the CD-ROM that shipped with this course. The activity simulation can be
launched either directly from the CD-ROM by clicking the Interactives link and navigating to the appropriate one,
or from the installed data п¬Ѓle location by opening the C:\Data\Simulations\Lesson#\Activity# folder and doubleclicking the executable (.exe) п¬Ѓle.
Scenario:
You manage a basic п¬Ѓle server for the Human Resources department at your company. The HR
department uses a single folder named Security for works in progress that may contain sensitive materials, but since they would like additional control over п¬Ѓle access, you have decided
to use individual п¬Ѓle permissions to limit access to certain users.
What You Do
How You Do It
1.
a. Browse to the C:\Data\Simulations\
Lesson11\Activity11-2 folder.
Test the permissions.
b. Double-click the executable file.
c. In the Open File - Security Warning message box, click Run.
d. Follow the on-screen steps for the simulation.
e. Close the C:\Data\Simulations\Lesson11\
Activity11-2 folder.
Lesson 11: System Security
363
Copyright В© Element K Corporation
LESSON 11
TOPIC C
Authentication Methods
In the previous topic, you identiп¬Ѓed the components of a local systemвЂ™s security. In a network
environment, there are security settings that control how users and computers authenticate to
the network. In this topic, you will identify different methods used for authentication.
Strong authentication is the п¬Ѓrst line of defense to secure network resources. But authentication
is not a single process; there are many methods and mechanisms involved. As a network professional, to effectively manage authentication on your network, you will need to understand
these different systems and what each one can provide for your organization.
Authentication
Deп¬Ѓnition:
Authentication is the method of uniquely validating a particular entity or individualвЂ™s
credentials. Authentication concentrates on identifying if a particular individual has the
right credentials to enter a system or secure site. Authentication credentials should be
kept secret to prevent unauthorized individuals from gaining access to conп¬Ѓdential
information.
Example:
Figure 11-11: Authentication with a user name and password.
Authentication Factors
Most authentication schemes are based on the use of one or more authentication factors. The factors include:
вЂў
Something you know, such as a password.
вЂў
Something you have, such as a token or access card.
вЂў
Something you are, including physical characteristics, such as п¬Ѓngerprints or a
retina pattern.
CompTIAВ® Network+В® (Exam N10-005)
364
Copyright В© Element K Corporation
LESSON 11
User Name/Password Authentication
The combination of a user name and a password is one of the most basic and widely used
authentication schemes. In this type of authentication, a system compares the userвЂ™s credentials
against credentials stored in a database. It authenticates the user if the user name and password
match the database. If not, the user is denied access. This method may not be very secure
because the userвЂ™s credentials are sometimes transmitted through the network as plaintext,
making the user name and password easily accessible to an attacker.
Figure 11-12: A combination of a user name and password for authentication.
Strong Passwords
Deп¬Ѓnition:
A strong password is a password that meets the complexity requirements that are set
by a system administrator and documented in a security policy or password policy.
Strong passwords increase the security of systems that use password-based authentication by protecting against password guessing and password attacks.
Password complexity requirements should meet the security needs of an individual
organization, and can specify:
вЂў
The minimum length of the password.
вЂў
Required characters, such as a combination of letters, numbers, and symbols.
вЂў
Forbidden character strings, such as the user account name or dictionary words.
Example:
Figure 11-13: Strong passwords increase system security.
Lesson 11: System Security
365
Copyright В© Element K Corporation
LESSON 11
Authentication by Assertion
Authentication based entirely on a user name/password combination is sometimes
called authentication by assertion, because once the client has a valid set of credentials, it can use them to assert its identity to obtain access to a resource.
Password Policies and Policy Tools
The types of password policies and the complexity settings they can include vary
between different organizations and systems. Human resources or the IT department
maintains an official password policy document that is often publicized to employees,
or it can be a system conп¬Ѓguration setting within an application or operating system.
Tokens
Deп¬Ѓnition:
Tokens are physical or virtual objects, such as smart cards, ID badges, or data packets,
that store authentication information. Tokens can store Personal Identiп¬Ѓcation Numbers
(PINs), information about users, or passwords. Unique token values can be generated
by special devices or software in response to a challenge from an authenticating server
or by using independent algorithms.
Example:
Figure 11-14: Tokens store authentication information.
Smart Cards
Smart cards are a common example of token-based authentication. A smart card is a
plastic card containing an embedded computer chip that can store different types of
electronic information. The contents of a smart card can be read with a smart card
reader.
Biometrics
Deп¬Ѓnition:
Biometrics are authentication schemes based on an individualвЂ™s physical characteristics.
This system can involve a п¬Ѓngerprint scanner, a retinal scanner, a hand geometry scanner, or voice-recognition and facial-recognition software. As biometric authentication
becomes less expensive to implement, it is adopted more widely.
CompTIAВ® Network+В® (Exam N10-005)
366
Copyright В© Element K Corporation
LESSON 11
Example:
Figure 11-15: Biometric authentication using a fingerprint scanner.
Multi-Factor Authentication
Deп¬Ѓnition:
Multi-factor authentication is any authentication scheme that requires validation of at
least two of the possible authentication factors. It can be any combination of who you
are, what you have, and what you know.
One-, Two-, and Three-Factor Authentication
An authentication scheme with just one factor can be called a one-factor authentication, while a two- or three-factor authentication scheme can simply be called multifactor authentication.
Example: A Multi-Factor Implementation
Requiring a physical ID card along with a secret password is an example of multifactor authentication. A bank ATM card is a common example of this.
Figure 11-16: Multi-factor authentication requires validation of at least two
of the authentication factors.
Non-Example: Username and Password Authentication
A user name and password is not a multi-factor authentication, because the user name
helps in identiп¬Ѓcation and the password alone acts as the authentication factor.
Mutual Authentication
Deп¬Ѓnition:
Mutual authentication is a security mechanism that requires that each party in a communication verify each otherвЂ™s identity. A service or resource veriп¬Ѓes the clientвЂ™s
credentials, and the client veriп¬Ѓes the resourceвЂ™s credentials. Mutual authentication prevents a client from inadvertently submitting conп¬Ѓdential information to a non-secure
server. Any type or combination of authentication mechanisms can be used.
Lesson 11: System Security
367
Copyright В© Element K Corporation
LESSON 11
Mutual authentication helps in avoiding man-in-the-middle and session hijacking attacks.
Example:
Figure 11-17: Mutual authentication to verify credentials.
SSO
Single Sign-On (SSO) is a mechanism in which a single user authentication provides access to
all the systems or applications where the user has permission. The user need not enter multiple
passwords each time he wants to access a system.
Figure 11-18: A user authenticated using SSO.
EAP
Extensible Authentication Protocol (EAP) is a protocol that enables systems to use hardwarebased identiп¬Ѓers, such as п¬Ѓngerprint scanners or smart card readers, for authentication. EAP
categorizes the devices into different EAP types depending on each deviceвЂ™s authentication
scheme. The EAP method associated with each type enables the device to interact with a systemвЂ™s account database.
Users might need to provide a password in addition to the physical authentication. EAP allows
for logon using different methods such as public-key authentication, Kerberos, and certiп¬Ѓcates.
RADIUS, a centralized authentication protocol, is often used with EAP.
CompTIAВ® Network+В® (Exam N10-005)
368
Copyright В© Element K Corporation
LESSON 11
Figure 11-19: EAP allows systems to use hardware-based identifiers for authentication.
EAP Implementations
There are other authentication protocols that are used in EAP implementations.
Protocol
Description
Extensible Authentication Protocol over
LAN (EAPOL)
EAP over LAN as used in 802.1X implementations.
Lightweight Extensible Authentication
Protocol (LEAP)
LEAP is Cisco SystemsвЂ™ proprietary EAP implementation.
EAP-Transport Layer Security (EAPTLS)
This widely supported feature in wireless routers and
cards provides robust security. Native support is
included in:
вЂў Mac OS X 10.3 and above
вЂў Windows XP and Windows 7
вЂў Windows Server 2008
вЂў Windows Mobile 7 and above
EAP-MD5
Provides minimal security and is easily bypassed or
hacked.
Protected Extensible Authentication
Protocol (PEAP)
PEAP, similar to EAP-TLS, was proposed as an open
standard by a coalition made up of Cisco Systems,
Microsoft, and RSA Security. PEAPv0/EAPMSCHAPv2 is a widely supported authentication
method in EAP implementations.
IEEE 802.1x
The IEEE 802.1x is a standard for securing networks by implementing EAP as the
authentication protocol over either a wired or wireless Ethernet LAN, rather than the
more traditional implementation of EAP over PPP. IEEE 802.1x, often referred to as
port authentication, employs an authentication service, such as RADIUS, to secure clients, removing the need to implement security features in APs, which typically do not
have the memory or processing resources to support complex authentication functions.
Lesson 11: System Security
369
Copyright В© Element K Corporation
LESSON 11
Kerberos
Kerberos is an authentication service that is based on a time-sensitive ticket-granting system. It
was developed by the Massachusetts Institute of Technology (MIT) to use an SSO method
where the user enters access credentials that are then passed to the authentication server, which
contains an access list and permitted access credentials. Kerberos can be used to manage
access control to several services using one centralized authentication server.
Figure 11-20: Kerberos is used to manage access control to services.
The Kerberos Authentication Process
In the Kerberos authentication process:
1. A user logs on to the domain.
2.
The user requests a Ticket Granting Ticket (TGT) from the authenticating server.
3.
The authenticating server responds with a time-stamped TGT.
4.
The user presents the TGT back to the authenticating server and requests a service
ticket to access a speciп¬Ѓc resource.
5.
The authenticating server responds with a service ticket.
6.
The user presents the service ticket to the resource.
7.
The resource authenticates the user and allows access.
Wireless Authentication Methods
There are three methods used for wireless authentication.
CompTIAВ® Network+В® (Exam N10-005)
370
Copyright В© Element K Corporation
LESSON 11
Authentication Method
Description
Open system
Open system authentication uses null authentication, which means that user
names and passwords are not used to authenticate a user. This is the default
for many APs and stations. Open system authentication enables a station to
connect to any wireless AP that has open system authentication enabled,
even if the SSID is different from the station.
When an AP and a station have an open system conп¬Ѓgured:
1. The station will п¬Ѓnd an AP by sending out a probe.
2. When it locates an AP, it sends a request for authentication to that AP.
3. The AP responds with an authentication success.
4. The station then associates itself with an AP by sending an association
request.
5. The AP, upon receipt of an association request, responds with a success
association response.
Shared-key
The shared-key authentication method veriп¬Ѓes the identity of a station by
using a WEP key. Both the station and the AP must be conп¬Ѓgured to use
data encryption and the same WEP key. The station also needs to be conп¬Ѓgured to use a shared-key authentication instead of the default setting,
which is open system authentication. Once conп¬Ѓgured correctly, the communication process begins.
1. The station probes for an AP and initiates an authentication request.
2. Upon receipt of the request, the AP issues a challenge to the station.
3. The station accepts the challenge and encrypts it using the WEP key
with which it has been conп¬Ѓgured.
4. The station then sends the challenge back to the AP that decrypts the
encrypted challenge using its key.
5. If both the station and the AP have the same key, the AP decrypts the
challenge with the matching WEP key.
6. The AP then authenticates the station.
7. The station initiates an association request.
8. The AP accepts the association request.
Lesson 11: System Security
371
Copyright В© Element K Corporation
LESSON 11
Authentication Method
Description
802.1x and EAP
The EAP authentication method authenticates a user and not the station.
This is done with a RADIUS server. An AP forwards the authentication
request to the RADIUS server, and the server calls the user credential database (for example, Active Directory in Windows domains) to verify the
user. The RADIUS server then passes the identity veriп¬Ѓcation to the AP.
The authentication process consists of the following steps:
1. A station initiates an authentication request to the AP.
2. The AP issues an EAP identity request.
3. Once the station receives the request, it sends an EAP identity response
to the AP.
4. The AP forwards the EAP identity response to the RADIUS server.
5. The RADIUS server issues a RADIUS access challenge, which passes
through the AP to the station.
6. The station sends a RADIUS challenge response that the AP forwards to
the RADIUS server.
7. If the RADIUS server can decrypt the challenge and verify the user, it
forwards a success response to the AP.
8. The AP forwards an EAP success to the station and the station can then
establish an association with the AP.
ACTIVITY 11-3
Discussing Authentication Methods
Scenario:
In this activity, you will discuss the characteristics of various authentication methods.
1.
Brian works at a bank. To access his laptop, he inserts his employee ID card into a special card reader. This is an example of:
a) User name/password authentication
b) Biometrics
c) Token-based authentication
d) Mutual authentication
CompTIAВ® Network+В® (Exam N10-005)
372
Copyright В© Element K Corporation
LESSON 11
2.
To access the server room, Brian places his index finger on a fingerprint reader. This is
an example of which authentication method:
a) Password
b) Token-based
c) Biometric
d) Multi-factor
3.
To withdraw money from an ATM, Nancy inserts a card and types a four-digit PIN. This
incorporates what types of authentication?
a) Token-based
b) Password
c) Biometrics
d) Multi-factor
e) Mutual
4.
Match each authentication method with its description.
Mutual
User name/password
Biometric
Token-based
a.
Authentication based on physical
characteristics.
b. An object that stores authentication
information.
c. A security mechanism that requires
that each party in a communication
verify its identity.
d. A security mechanism where a userвЂ™s
credentials are compared against credentials stored on a database.
TOPIC D
Encryption Methods
In the previous topic, you identiп¬Ѓed secure client authentication methods to prevent unauthorized access. Apart from restricting access, it is also important to ensure the integrity of data
by securing it. Data encryption can be used to secure information. In this topic, you will identify major data encryption methods and standards.
However fast you secure your digital communications, hackers will test the security method
and attempt to breach the systems. To stay one step ahead of the hackers and protect data, you
need to understand the fundamentals of data encryption and the choices you have for implementing data encryption in your organization.
Lesson 11: System Security
373
Copyright В© Element K Corporation
LESSON 11
Encryption
Deп¬Ѓnition:
Encryption is a cryptographic technique that converts data from plain, or cleartext
form, into coded, or ciphertext form. Only authorized parties with the necessary
decryption information can decode and read the data. Encryption can be one-way,
which means the encryption is designed to hide only the cleartext and is never
decrypted. Encryption can also be two-way, in which ciphertext can be decrypted back
to cleartext and read.
Example:
Figure 11-21: Encryption converts plain data into ciphertext.
Cryptography
Cryptography is the science of hiding information. The practice of cryptography is
thought to be nearly as old as the written word. Current cryptographic science has its
roots in mathematics and computer science and relies heavily upon technology. Modern communications and computing use cryptography extensively to protect sensitive
information and communications from unauthorized access.
The word cryptography has roots in the Greek words kryptГіs, meaning вЂњhidden,вЂќ and вЂњgrГЎphein,вЂќ
meaning вЂњto write,вЂќ translating into вЂњhidden writing.вЂќ
Ciphers
A cipher is a speciп¬Ѓc set of actions used to encrypt data. Plaintext is the original,
unencoded data. Once the cipher is applied via enciphering, the obscured data is
known as ciphertext. The reverse process of translating ciphertext to cleartext is known
as deciphering.
Encryption and Security Goals
Encryption is used to promote many security goals and techniques. Encryption enables conп¬Ѓdentiality by protecting data from unauthorized access. It supports integrity because it is
difficult to decipher encrypted data without the secret decrypting cipher. It supports nonrepudiation, because only parties that know about the conп¬Ѓdential encryption scheme can
encrypt or decrypt data. In addition, some form of encryption is employed in most authentication mechanisms to protect passwords. Encryption is used in many access control mechanisms
as well.
Forms of Encryption
It is becoming common to encrypt many forms of communications and data streams,
as well as entire hard disks. Some operating systems support whole-disk encryption
whereas some other commercially available open-source tools are capable of encrypting all or part of the data on a disk or drive.
CompTIAВ® Network+В® (Exam N10-005)
374
Copyright В© Element K Corporation
LESSON 11
Encryption Algorithms
An encryption algorithm is the rule, system, or mechanism used to encrypt data. Algorithms can be simple mechanical substitutions, but in electronic cryptography, they are
generally complex mathematical functions. The stronger the mathematical function, the
more difficult it is to break the encryption. A letter-substitution cipher, in which each
letter of the alphabet is systematically replaced by another letter, is an example of a
simple encryption algorithm.
Key-Based Encryption Systems
Data encryption depends on the use of a key to control how information is encoded and
decoded. There are two main categories of key-based encryption.
вЂў
In shared-key, or symmetric, encryption systems, the same key is used both to encode and
to decode the message. The secret key must be communicated securely between the two
parties involved in the communication.
вЂў
In key-pair, or asymmetric, encryption systems, each party has two keys: a public key,
which anyone can obtain, and a private key, known only to the individual. Anyone can
use the public key to encrypt data; only the holder of the associated private key can
decrypt it.
Figure 11-22: Shared-key encryption uses the same key for encoding and decoding.
Figure 11-23: Key-pair encryption uses two separate keys for encoding and decoding.
Lesson 11: System Security
375
Copyright В© Element K Corporation
LESSON 11
WEP
Deп¬Ѓnition:
Wired Equivalent Privacy (WEP) is a protocol that provides 64-bit, 128-bit, and 256bit encryption using the Rivest Cipher 4 (RC4) algorithm for wireless communication
that uses the 802.11a and 802.11b protocols. While WEP might sound like a good
solution at п¬Ѓrst, it is ironically not as secure as it should be. The problem stems from
the way WEP produces the keys that are used to encrypt data. Because of a п¬‚aw in the
method, attackers could easily generate their own keys using a wireless network capture tool, such as Airsnort or WEPCrack, to capture and analyze as much as 10 Mb of
data transferred through the air.
Example:
Figure 11-24: WEP provides encryption using the RC4 algorithm.
WPA/WPA2
Deп¬Ѓnition:
Wi-Fi Protected Access (WPA) is a security protocol introduced to address some of the
shortcomings in WEP. It provides for dynamic reassignment of keys to prevent the
key-attack vulnerabilities of WEP. WPA provides improved data encryption through the
Temporal Key Integrity Protocol (TKIP), which is a security protocol created by the
IEEE 802.11i task group to replace WEP. It is combined with the existing WEP
encryption to provide a 128-bit encryption key that п¬Ѓxes the key length issues of WEP.
In addition to TKIP, WPA2 adds Advanced Encryption Standard (AES) cipher-based
Counter Mode with Cipher Block Chaining Message Authentication Code Protocol
(CCMP) encryption for even greater security and to replace TKIP.
In order to use WPA, you may need to use devices that support WPA. Older WAPs may only support
WEP.
WPA can operate in two modes: WPA-Personal and WPA-Enterprise
CompTIAВ® Network+В® (Exam N10-005)
376
Copyright В© Element K Corporation
LESSON 11
Mode
Description
WPA-Personal
In this mode, the WAP is conп¬Ѓgured with a value known as the
preshared key, which is used to encrypt data. It is used for personal use
and by small businesses. Also known as WPA-PSK.
WPA-Enterprise
This mode is designed for enterprise networks. It assigns a unique
encryption key for every client when they log on to the network. This
encryption key is regularly updated making it impossible for a Wi-Fi
snooper to decode the key. WPA-Enterprise uses a RADIUS server for
authentication, which provides logging and accounting information. It
also uses EAP to provide authentication.
Example:
Figure 11-25: WPA/WPA2 prevents WEP from key-attack vulnerabilities.
Digital Certiп¬Ѓcates
Deп¬Ѓnition:
A digital certiп¬Ѓcate is an electronic document that associates credentials with a public
key. Both users and devices can hold certiп¬Ѓcates. The certiп¬Ѓcate validates the certiп¬Ѓcate holderвЂ™s identity and is also a way to distribute the holderвЂ™s public key. A server
called a Certiп¬Ѓcate Authority (CA) issues certiп¬Ѓcates and the associated public/private
key pairs.
Example:
Figure 11-26: Digital certificates associate credentials with a public key.
Lesson 11: System Security
377
Copyright В© Element K Corporation
LESSON 11
Keys
An encryption key is a speciп¬Ѓc piece of information that is used in conjunction with an
algorithm to perform encryption and decryption. A different key can be used with the
same algorithm to produce different ciphertext. Without the correct key, the receiver
cannot decrypt the ciphertext even if the algorithm is known. The longer the key, the
stronger the encryption.
In a simple letter-substitution algorithm, the key might be вЂњreplace each letter with the
letter that is two letters following it in the alphabet.вЂќ If the same algorithm were used
on the same cleartext but with a different keyвЂ”for example, вЂњreplace each letter with
the one three letters before itвЂќвЂ”the resulting ciphertext would be different.
Certiп¬Ѓcate Encryption
Certiп¬Ѓcates can be used for data encryption. In the certiп¬Ѓcate encryption process consists of
four steps:
1. A security principal obtains a certiп¬Ѓcate and a public/private key pair from a CA.
2.
The party that encrypts data obtains the userвЂ™s public key from the user or from the CAвЂ™s
certiп¬Ѓcate repository.
3.
The encrypting party then uses the public key to encrypt the data and sends it to the other
user.
4.
The other user uses the private key to decrypt the data.
Figure 11-27: Users share keys and certificates to encrypt and decrypt data.
Encrypting File System
The Encrypting File System (EFS) is a п¬Ѓle-encryption tool available on Windows systems that have partitions formatted with NT File System (NTFS). EFS encrypts п¬Ѓle
data by using digital certiп¬Ѓcates. If a CA is not available to issue a п¬Ѓle-encryption certiп¬Ѓcate, the local system can issue a self-signed encryption certiп¬Ѓcate to users who
want to encrypt п¬Ѓles. Unlike NTFS permissions, which control access to the п¬Ѓle, EFS
protects the contents of the п¬Ѓle. With EFS, you can keep data secure even if NTFS
security is breachedвЂ”for example, if an attacker steals a laptop computer and moves
the laptopвЂ™s hard drive to another system to bypass the NTFS security implementations.
CompTIAВ® Network+В® (Exam N10-005)
378
Copyright В© Element K Corporation
LESSON 11
PKI
Deп¬Ѓnition:
A Public Key Infrastructure (PKI) is an encryption system that is composed of a CA,
certiп¬Ѓcates, software, services, and other cryptographic components. It is used to verify
data authenticity and validate data and entities. PKI can be implemented in various
hierarchical structures, and may be publicly available or maintained privately by an
organization. It can also be used to secure transactions over the Internet.
Example:
Figure 11-28: PKI consists of a CA, certificates, software and services.
PKI Components
PKI contains several components:
вЂў
Digital certiп¬Ѓcates, to verify the identity of entities.
вЂў
One or more CAs, to issue digital certiп¬Ѓcates to computers, users, or applications.
вЂў
A Registration Authority (RA), responsible for verifying usersвЂ™ identities and
approving or denying requests for digital certiп¬Ѓcates.
вЂў
A certiп¬Ѓcate repository database, to store the digital certiп¬Ѓcates.
вЂў
A certiп¬Ѓcate management system, to provide software tools to perform the day-today functions of the PKI.
Certiп¬Ѓcate Authentication
When a user authenticates using a certiп¬Ѓcate, the user presents a digital certiп¬Ѓcate in place of a
user name and password. A CA validates the certiп¬Ѓcate of the user for authentication.
Certiп¬Ѓcate authentication is the process of identifying users in a transaction by carrying out a
series of steps before conп¬Ѓrming the identity of the user. These can include:
1. Initiating a secure transaction such as a client requesting access to a secure site.
2.
The secure site presents its digital certiп¬Ѓcate to the client with its public key and veriп¬Ѓed
digital signature enclosed.
3.
The client browser compares it to a library of certiп¬Ѓcate authorities and validates the signature against its cache of trusted and acknowledged certiп¬Ѓcates.
Lesson 11: System Security
379
Copyright В© Element K Corporation
LESSON 11
4.
Once the client accepts the digital signature, then the certiп¬Ѓcate authentication is successful.
If the issuing CA does not match the library of certiп¬Ѓcate authorities in the client, then
certiп¬Ѓcate authentication is unsuccessful and the user obtains a notiп¬Ѓcation that the digital
certiп¬Ѓcate supplied is invalid.
Figure 11-29: Certificate authentication identifies end users in a transaction.
Digital Signatures
A digital signature is a message digest that has been encrypted with a userвЂ™s private
key. Asymmetric encryption algorithms can be used with hashing algorithms to create
digital signatures. The sender creates a hashed version of the message text, and then
encrypts the hash itself with the senderвЂ™s private key. The encrypted hash is attached to
the message as the digital signature.
The sender provides the receiver with the signed message and the corresponding public
key. The receiver uses the public key to decrypt the signature to reveal the senderвЂ™s
version of the hash. This proves the senderвЂ™s identity, because, if the public and private
keys did not match, the receiver would not be able to decrypt the signature. The
receiver then creates a new hash version of the document with the public key and
compares the two hash values. If they match, this proves that the data has not been
altered.
Digital signatures support message integrity, because if the signature is altered in transit, the receiverвЂ™s
version of the hash will not match the original hash value. They support non-repudiation because the
speciп¬Ѓc encrypted hash value is unique to a sender.
Hashing Encryption
Hashing encryption is one-way encryption that transforms cleartext into ciphertext that
is not intended to be decrypted. The result of the hashing process is called a hash,
hash value, or message digest. The input data can vary in length, whereas the hash
length is п¬Ѓxed.
Encryption of the Hash
It is important to remember that a digital signature is a hash that is then encrypted.
Without the second round of encryption, another party could easily:
1. Intercept the п¬Ѓle and the hash.
CompTIAВ® Network+В® (Exam N10-005)
380
Copyright В© Element K Corporation
LESSON 11
2.
Modify the п¬Ѓle.
3.
Re-create the hash.
4.
Send the modiп¬Ѓed п¬Ѓle to the recipient.
DES
Data Encryption Standard (DES) is a shared-key encryption standard that is based on a 56-bit
encryption key that includes an additional 8 parity bits. DES applies the encryption key to
each 64-bit block of the message. Triple DES or 3DES is a more-secure variant of DES that
uses three separate DES keys to repeatedly encode the message.
Figure 11-30: DES includes 8 parity bits and a 56вЂ“bit encryption key.
Encryption Devices
Deп¬Ѓnition:
In encryption devices, encryption, decryption, and access control are enforced by a
cryptographic module called a Hardware Security Module (HSM). Encryption devices
do not allow the execution of external programs, which attempt either to reset any
counters or access their memory. The lockdown in the event of unauthenticated use can
also destroy data and encryption keys that are present on a USB drive or a hard drive,
based on the level of security enforced in the HSMs.
Lesson 11: System Security
381
Copyright В© Element K Corporation
LESSON 11
Example:
Figure 11-31: HSM enforces encryption and decryption.
Beneп¬Ѓts of Encryption Devices
Encryption devices provide beneп¬Ѓts such as:
вЂў
Preventing storage mapping from the drive to the п¬Ѓle system until a user inserts a
plug-in smart card into a slot connected to the hard drive.
вЂў
Preventing attackers from copying the drive contents without the assigned HSM.
вЂў
Providing security controls that are self-governed and not dependent on the operating system; therefore, the hard drive is not affected by malicious code.
вЂў
Providing an organization with the proof that each machine is encrypted.
In the event of a machine being lost due to a security attack, this will act as an
assurance to customers that none of the data has been lost or compromised.
SSL
Secure Sockets Layer (SSL) is a security protocol that combines digital certiп¬Ѓcates for authentication with public key data encryption. SSL is a server-driven process; any web client that
supports SSL, including all current web browsers, can connect securely to an SSL-enabled
server.
Figure 11-32: SSL combines digital certificates for authentication.
Encryption Using SSL
The encryption process in SSL consists of the following steps:
1. A client requests a session from a server.
CompTIAВ® Network+В® (Exam N10-005)
382
Copyright В© Element K Corporation
LESSON 11
2.
The server responds by sending its digital certiп¬Ѓcate and public key to the client.
3.
The server and client then negotiate an encryption level.
4.
The client generates and encrypts a session key using the serverвЂ™s public key, and returns
it to the server.
5.
The client and server then use the session key for data encryption.
Figure 11-33: SSL combines digital certificates with public-key data encryption.
TLS
Transport Layer Security (TLS) is a security protocol that protects sensitive communication
from being eavesdropped and tampered. It does this by using a secure, encrypted, and authenticated channel over a TCP/IP connection. TLS uses certiп¬Ѓcates and public key cryptography for
mutual authentication and data encryption using negotiated secret keys.
Figure 11-34: TLS uses a secure channel over a TCP/IP connection.
TLS and SSL
TLS is very similar to SSL, but the two protocols are incompatible with each other.
TLS1.2
TLS1.2 is the current version of the TLS protocol. TLS1.2 has a variety of security
measures:
Lesson 11: System Security
383
Copyright В© Element K Corporation
LESSON 11
вЂў
It prevents downgrade of the protocol to a previous (less secure) version or a
weaker cipher suite.
вЂў
It uses sequence numbering based on application records in authentication code
for messages.
вЂў
It uses a message digest upgraded with a key to ensure that MAC can be checked
only by a key-holder.
ACTIVITY 11-4
Securing Wireless Traffic
This is a simulated activity available on the CD-ROM that shipped with this course. The activity simulation can be
launched either directly from the CD-ROM by clicking the Interactives link and navigating to the appropriate one,
or from the installed data п¬Ѓle location by opening the C:\Data\Simulations\Lesson#\Activity# folder and doubleclicking the executable (.exe) п¬Ѓle.
Scenario:
You have been assigned the task of tightening security for the sales department of OGC Technologies. As most of the employees in this department are constantly on the move, you need to
install Windows 7 on their laptops, and secure them using wireless authentication and encryption methods to protect conп¬Ѓdential data. Employees often transfer client data and other sales
information on systems that are part of a workgroup to ensure that only authenticated systems
in the workgroup communicate with each other. You have successfully tested Internet access
through the wireless router, and now you need to conп¬Ѓgure the security features of the router.
What You Do
How You Do It
1.
a. Browse to the C:\Data\Simulations\
Lesson11\Activity11-4 folder.
Configure the wireless security on
your wireless router.
b. Double-click the executable file.
c. In the Open File - Security Warning message box, click Run.
d. Follow the on-screen steps for the simulation.
e. Close the C:\Data\Simulations\Lesson11\
Activity11-4 folder.
CompTIAВ® Network+В® (Exam N10-005)
384
Copyright В© Element K Corporation
LESSON 11
ACTIVITY 11-5
Installing a CA
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\SPlus\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
As the network administrator for a private university located in Rochester, New York, USA,
one of your job functions is to make sure the CA designed by the IT department is implemented correctly. To prevent users from receiving unapproved certiп¬Ѓcates and accessing
information that they are not supposed to and also to prevent attackers from getting data, the
university has decided to implement a new secure CA using Windows Server 2008 R2 CAs.
The IT design team has created and documented a CA implementation plan that calls for
installing a root CA for the entire university. The Windows Server 2008 R2 systems on which
you will install certiп¬Ѓcate services have already been hardened to minimize the likelihood of
attacks against the operating system itself from external users.
Although Certiп¬Ѓcate Services is running on a domain controller for classroom and testing purposes, this is a
security risk and should not be replicated on a real-time network.
What You Do
1.
Install Active Directory Certificate
Services on the CA.
How You Do It
a. In the Server Manager window, in the
Roles Summary section, click the Add
Roles link.
b. In the Add Roles Wizard, on the Before
You Begin page, click Next.
c. On the Select Server Roles page, in the
Roles section, check the Active Directory
Certificate Services check box and click
Next.
d. On the Introduction to Active Directory
Certificate Services page, click Next.
e. On the Select Role Services page, check
the Certification Authority Web Enrollment check box.
f.
In the Add Roles Wizard dialog box, click
Add Required Role Services. Click Next.
Lesson 11: System Security
385
Copyright В© Element K Corporation
LESSON 11
g. On the Specify Setup Type page, verify
that the Standalone option is selected.
Click Next.
h. On the Specify CA Type page, with the
Root CA option selected, click Next.
i.
On the Set Up Private Key page, with the
Create a new private key option
selected, click Next.
j.
On the Configure Cryptography for CA
page, click Next to accept the default
values.
k. On the Configure CA Name page, in the
Common name for this CA text box, type
UniversityCA## as the common name for
the CA. Click Next.
l.
On the Set Validity Period page, click
Next to accept the default validity period
for the certificate.
m. On the Configure Certificate Database
page, click Next to accept the default
storage location for the CA database and
log.
n. On the Web Server (IIS) page, click Next.
o. On the Select Role Services page, click
Next.
p. On the Confirm Installation Selections
page, click Install.
q. On the Installation Results page, click
Close and then close Server Manager.
CompTIAВ® Network+В® (Exam N10-005)
386
Copyright В© Element K Corporation
LESSON 11
2.
Verify that Active Directory Certificate Services was installed properly.
a. Choose Startв†’Administrative Toolsв†’
Certification Authority.
b. The CA object should appear in the
Microsoft Management Console (MMC) window. Select the CA object and choose
Actionв†’Properties.
c. In the UniversityCA# Properties dialog
box, the name should appear as you configured it during installation. Click View
Certificate.
d. The certificate should expire in five years.
Click OK to close the Certificate dialog
box.
e. Click OK to close the UniversityCA# Properties dialog box, and close the
Certification Authority window.
Lesson 11: System Security
387
Copyright В© Element K Corporation
LESSON 11
Lesson 11 Follow-up
In this lesson, you identiп¬Ѓed the major issues and technologies involved in securing systems on
a network. With more and more threats to systems appearing every day, your responsibility as
a networking professional will be to ensure that your network provides the appropriate level of
security, without compromising performance.
1.
Which of the basic security concepts in this lesson were familiar to you, and which
were new?
2.
Can you describe some situations in which you have used basic security techniques
such as authentication, access control, and encryption, or made use of a security
policy?
CompTIAВ® Network+В® (Exam N10-005)
388
Copyright В© Element K Corporation
LESSON 12
LESSON 12
Lesson Time
2 hour(s), 15 minutes
Network Security
In this lesson, you will identify the major issues and technologies in network security.
You will:
вЂў
Identify the primary techniques used to secure the perimeter of a network.
вЂў
Identify methods of intrusion detection and prevention on a network.
вЂў
Protect network traffic using IPSec.
Lesson 12: Network Security
389
Copyright В© Element K Corporation
LESSON 12
Introduction
This course covers the fundamental knowledge and skills needed by network administrators
and support personnel. One of the basic tasks in network management is securing a network.
In this lesson, you will identify the major network security issues and technologies involved in
securing a network.
Each day, the number and complexity of threats against computer network security increases.
In response to these threats, there are more and more security tools and techniques available to
increase network security. As a networking professional, your organization and users will be
looking to you to ensure that your network environment provides the appropriate level of security, without compromising on network performance.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
вЂў
вЂў
Topic A:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
4.1 Explain the purpose and features of various network appliances.
вЂ”
5.2 Explain the methods of network access security.
вЂ”
5.3 Explain methods of user authentication.
вЂ”
5.5 Given a scenario, install and conп¬Ѓgure a basic п¬Ѓrewall.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
5.6 Categorize different types of network security appliances and methods.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
5.2 Explain the methods of network access security.
TOPIC A
Network Perimeter Security
Connections to the Internet have their own speciп¬Ѓc security considerations. The security measures for Internet are different from the security measures used for local and private networks.
In this topic, you will identify the primary techniques used to secure the perimeter of your network.
Every organization today needs to connect to the Internet. At the same time, there are valid
concerns about the risks involved in connecting to this huge, open, public network. As a network professional, you need to be aware of speciп¬Ѓc tools and techniques that organizations can
use to protect themselves from outside attacks as well as prevent misuse of the connection to
the Internet.
CompTIAВ® Network+В® (Exam N10-005)
390
Copyright В© Element K Corporation
LESSON 12
NAT
Deп¬Ѓnition:
Network Address Translation (NAT) is a form of Internet security that conceals internal
addressing schemes from external networks such as the Internet. A router is conп¬Ѓgured
with a single public IP address on its external interface and a nonroutable address on
its internal interface. A NAT service running on the router or on another system translates between the two addressing schemes. Packets sent to the Internet from internal
hosts all appear as if they came from a single IP address, thus preventing external
hosts from identifying and connecting directly to internal systems.
An internal network can be conп¬Ѓgured with a private IP address, which makes NAT both secure and
cost-efп¬Ѓcient.
Example:
Figure 12-1: NAT conceals internal addressing schemes from the public
Internet.
NAT Implementations
NAT can be implemented as software on a variety of systems, or as hardware in a
dedicated device such as a router. ICS in Windows systems includes a simple softwarebased NAT implementation, but requires a separate device, such as a modem, to
provide Internet connectivity. Hardware-based NAT devices, such as cable modems and
DSL routers, often have extended functionality and can double as Internet access
devices.
Static vs. Dynamic NAT
In static NAT, an unregistered address is mapped to a single speciп¬Ѓc registered address.
In dynamic NAT, a single unregistered address is mapped to the п¬Ѓrst registered address
in an address pool.
PAT
Port Address Translation (PAT) is a subset of dynamic NAT functionality that maps
either one or more unregistered addresses to a single registered address using multiple
ports. PAT is also known as overloading.
SNAT
SNAT is an intensely debated acronym that can stand for Secure NAT, Stateful NAT,
Source NAT, or Static NAT, depending on the source of information. Per Cisco, the
originators of NAT, SNAT stands for Stateful NAT. SNAT includes two or more routers
working together to perform NAT.
Lesson 12: Network Security
391
Copyright В© Element K Corporation
LESSON 12
ACTIVITY 12-1
Conп¬Ѓguring NAT
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
You are a network administrator in your company and you have been assigned the task of conп¬Ѓguring a NAT service on your network. There are several computers in the network that are
to be connected to NAT so that they can access the Internet in a secure manner.
What You Do
How You Do It
1.
a. Choose Startв†’Administrative Toolsв†’
Routing and Remote Access.
Enable NAT for routing.
b. If necessary, in the Routing and Remote
Access window, on the left pane, expand
the server object.
c. Expand IPv4 and select General.
d. Right-click General and choose New Routing Protocol.
e. In the New Routing Protocol dialog box,
verify that NAT is selected and click OK.
f.
Observe that on the left pane, a new
entry called NAT appears under IPv4.
CompTIAВ® Network+В® (Exam N10-005)
392
Copyright В© Element K Corporation
LESSON 12
2.
Exclude reserved IP addresses and
configure NAT.
a. Right-click NAT and choose Properties.
b. In the NAT Properties dialog box, select
the Address Assignment tab, check the
Automatically assign IP addresses by
using the DHCP allocator check box.
c. Click Exclude.
d. In the Exclude Reserved Addresses dialog
box, click Add.
e. Enter the IP address of a partner computer.
f.
In the Exclude Reserved Addresses dialog
box, click OK.
g. In the NAT Properties dialog box, click
Apply and then click OK.
h. Right-click NAT and choose New Interface
to create an interface for NAT.
i.
In the New Interface for IPNAT dialog
box, select Loopback Adapter and click
OK.
j.
From the Interface Type section, select
Public interface connected to the
Internet.
k. In the Network Address Translation
Properties dialog box, check the Enable
NAT on this interface check box, click
Apply and then click OK.
l.
Close the Routing and Remote Access window.
Lesson 12: Network Security
393
Copyright В© Element K Corporation
LESSON 12
The NAT Process
The NAT process translates external and internal addresses based on port numbers.
Figure 12-2: Steps in the NAT process.
Step
Description
Step 1: Client request
An internal client sends a request to an external service, such as a
website, using the external destination IP address and port number.
Step 2: Source address conversion
The NAT device converts the source address in the request packet to its
own external address, and adds a reference port number to identify the
originating client.
Step 3: Data return
The service returns data to the NAT deviceвЂ™s external address using the
reference port number.
Step 4: Internal source iden- NAT uses the reference port number to identify the correct internal source
tiп¬Ѓcation
address.
Step 5: Data delivery
NAT readdresses the packet to the internal system and delivers the data.
IP Filtering
IP п¬Ѓltering determines which packets will be allowed to pass and which packets will be
dropped by screening the packet based on certain criteria. An administrator can set criteria to
determine which packets to п¬Ѓlter, such as the protocol type, source IP address, and destination
IP address. When a packet is dropped, it is deleted and treated as if it was never received. IP
п¬Ѓltering operates mainly at Layer 2 of the TCP/IP protocol stack and is generally performed by
a screening router, although other network devices can also perform IP п¬Ѓltering.
CompTIAВ® Network+В® (Exam N10-005)
394
Copyright В© Element K Corporation
LESSON 12
Figure 12-3: IP filtering screens the packets.
MAC Filtering
MAC address п¬Ѓltering provides a simple method of securing a wireless network. By conп¬Ѓguring a WAP to п¬Ѓlter MAC addresses, you can control which wireless clients can access your
network. Typically, an administrator conп¬Ѓgures a list of client MAC addresses that are allowed
to join the network. Those preapproved clients are granted access if the MAC address is
вЂњknownвЂќ by the access point. A note of caution, though: it is not difficult for someone with a
little skill and know-how to change a MAC address, falsely gain authorization using another
computer, and gain access to your network. While MAC п¬Ѓltering is usually implemented on
wireless networks, it can also be used on wired networks.
Figure 12-4: MAC address filtering provides control over clients who join the network.
Lesson 12: Network Security
395
Copyright В© Element K Corporation
LESSON 12
Firewalls
Deп¬Ѓnition:
A п¬Ѓrewall is a software program or a hardware device or a combination of both that
protects a system or network from unauthorized data by blocking unsolicited traffic.
Firewalls generally are conп¬Ѓgured to block suspicious or unsolicited incoming traffic,
but allow incoming traffic sent as a response to requests from internal hosts. They permit traffic that has speciп¬Ѓcally been permitted by a system administrator, based on a
deп¬Ѓned set of rules. Information about the incoming or outgoing connections can be
saved to a log, and used for network monitoring or hardening purposes. Firewalls use
complex п¬Ѓltering algorithms that analyze incoming packets based on destination and
source addresses, port numbers, and the data type.
Figure 12-5: A firewall blocks unwanted network traffic.
Example: Firewall Deployment
Firewalls are universally deployed between private networks and the Internet. They can
also be used between two separate private networks, or on individual systems, to control data п¬‚ow between any two sources.
Software and Hardware Firewalls
The word вЂњп¬ЃrewallвЂќ generally refers to software-based п¬Ѓrewalls. Software п¬Ѓrewalls can
be useful for small home offices and businesses. The п¬Ѓrewall provides many features
that can be conп¬Ѓgured to suit various computing needs. Some features include:
вЂў
Enabling or disabling port security on certain ports.
вЂў
Filtering inbound and outbound communication. A user can set up rules or exceptions in the п¬Ѓrewall settings to limit access to the web.
вЂў
Reporting and logging activity.
вЂў
Protecting systems from malware and spyware.
вЂў
Blocking pop-up messages.
вЂў
Assigning, forwarding, and triggering ports.
A hardware п¬Ѓrewall is a hardware device, either stand-alone or built into most routers,
that protects computers on a private network from unauthorized traffic. They are placed
between the private network and the public network to manage inbound and outbound
traffic and network access.
CompTIAВ® Network+В® (Exam N10-005)
396
Copyright В© Element K Corporation
LESSON 12
Firewall Rules
There are three sets of п¬Ѓrewall rules to block/allow content. These rules can be set
using the Windows Firewall with Advanced Security console:
вЂў
Inbound rules: These rules deп¬Ѓne the action to be performed by the п¬Ѓrewall on
the data that enters the system from another system.
вЂў
Outbound rules: These rules deп¬Ѓne the action to be performed by the п¬Ѓrewall on
the data that п¬‚ows out of the system.
вЂў
Connection security rules: These rules deп¬Ѓne the type of authentication that is
needed to allow communication between the systems.
Port Security
Port security is the process of properly securing ports on a network. The process
includes:
вЂў
Disabling unnecessary services.
вЂў
Closing ports that are by default open or have limited functionality.
вЂў
Regularly applying the appropriate security patches.
вЂў
Hiding responses from ports that indicate their status and allow access to preconп¬Ѓgured connections only.
Firewall Types
Firewalls can be of different types based upon the requirements of the network. There are four
common types of п¬Ѓrewalls.
Firewall Type
Description
Packet п¬Ѓlters
Packet п¬Ѓlters are the simplest implementation of a п¬Ѓrewall and work at the
Network layer of the OSI model. Each packet being passed along the network is compared to a set of default criteria or a set of rules conп¬Ѓgured by a
network administrator. Once a packet is compared to the criteria, it is passed
or dropped, or a message sent back to the originator. Packet п¬Ѓlters are usually a part of a router.
Stateful inspection
п¬Ѓrewall
Stateful inspection п¬Ѓrewalls work at the Session layer of the OSI model by
monitoring the condition, or state, of the connection. It monitors the TCP
connection-establishment to determine if a request is legitimate. Stateful
inspection п¬Ѓrewalls are also known as circuit-level gateways.
Proxy п¬Ѓrewall
Proxy п¬Ѓrewalls work at the Application layer of the OSI model and require
incoming and outgoing packets to have a proxy to access services. This
functionality allows proxy п¬Ѓrewalls to п¬Ѓlter application-speciп¬Ѓc commands.
Proxy п¬Ѓrewalls can be used to log user activity and logons, which offer
administrators a high level of security but signiп¬Ѓcantly impacts network performance. Also known as application-level gateways.
Hybrid п¬Ѓrewall
Hybrid п¬Ѓrewalls combine the functions of a packet п¬Ѓlter, a stateful inspection
п¬Ѓrewall, and a proxy п¬Ѓrewall.
They operate on all three OSI layers: Network, Session, and Application
simultaneously.
Lesson 12: Network Security
397
Copyright В© Element K Corporation
LESSON 12
Network-Based vs. Host-Based Firewalls
A network-based п¬Ѓrewall is a dedicated hardware/software combination that protects all
the computers on a network behind the п¬Ѓrewall. A host-based п¬Ѓrewall (also known as a
personal п¬Ѓrewall) is a software that is installed directly on a host and п¬Ѓlters incoming
and outgoing packets to and from that host.
Some popular personal п¬Ѓrewalls are ZoneAlarm, Norton Personal Firewall, and Windows XP Internet
Connection Firewall (ICF).
Stateful vs. Stateless
A stateless п¬Ѓrewall is a п¬Ѓrewall that manages and maintains the connection state of a
session through the п¬Ѓlter to ensure that only authorized packets are permitted in
sequence. It thus performs a stateful inspection and keeps track of the network connections in progress. So, it can п¬Ѓlter a legitimate packet for various connections and allow
only the packets matching a recognized connection state to pass, dropping the others.
A stateless п¬Ѓrewall monitors network traffic and forwards or drops packets based on
static rules.
In contrast, stateful п¬Ѓrewall monitors communication paths and data п¬‚ow on the network. Stateful п¬Ѓrewalls track the connection status and integrity of packets.
Stateful Inspection
Stateful inspection builds on the process of packet п¬Ѓltering by analyzing each packet to
ensure that the content matches the expected service it is communicating with. For
example, stateful inspection would check web traffic data to ensure that it is HTML
data. If the data type did not match the acceptable use for the service, stateful inspection would block the packet from passing through. With stateful inspection, it is
possible to do antivirus checks and even quarantine suspicious data if it matches certain criteria.
Stateful inspection is a very powerful feature, but it comes at a cost. The processing
overhead incurred in analyzing every individual packet passing through the п¬Ѓlter is
extremely resource-intensive. Signiп¬Ѓcant processor and memory resources are required
in order to provide the stateful inspection capability and to minimize network latency.
In addition, stateful inspection devices are typically very expensive.
Common Firewall Features
Modern п¬Ѓrewall software and hardware can offer a great deal of features and functionality.
Firewall Feature
Description
Scanning services
Provides the ability to scan incoming and outgoing packets and perform
some action based on the content of those packets.
Content п¬Ѓltering
Blocks restricted websites or content. This can be accomplished by URL
п¬Ѓltering, or inspection of each п¬Ѓle or packet. Some п¬Ѓrewalls have this
functionality built in; in other cases, each request is passed to a п¬Ѓltering
server that can approve or deny the request.
CompTIAВ® Network+В® (Exam N10-005)
398
Copyright В© Element K Corporation
LESSON 12
Firewall Feature
Description
Signature identiп¬Ѓcation
Many modern п¬Ѓrewalls can scan for and detect indicators and patterns that
may indicate that a network-based attack is underway. These indicators
could also signify that data in question is not legitimate or could be
infected with a virus, Trojan, or other malicious code. These indicators are
compared against a list of known features, or signatures, of common
threats including network-based attacks and viruses. The data is then
handled according to the rules established by the п¬Ѓrewall administrator.
Zones
Firewall zones are used to create a virtual or physical network topology or
architecture that creates separate areas (zones) with differing security levels. For example, web servers may be placed inside п¬Ѓrewalls with
increased security due to frequent attacks, while a departmental п¬Ѓle server
might be placed in a medium security zone because it is less likely to be
directly attacked.
Implicit Deny
The principle of implicit deny dictates that when using a п¬Ѓrewall, anything that is not
explicitly allowed is denied. Users and software should only be allowed to access data
and perform actions when permissions are speciп¬Ѓcally granted to them. No other action
is allowed.
DMZs
Deп¬Ѓnition:
A demilitarized zone (DMZ) is a small section of a private network that is located
between two п¬Ѓrewalls and made available for public access. A DMZ enables external
clients to access data on private systems, such as web servers, without compromising
the security of the internal network as a whole. The external п¬Ѓrewall enables public
clients to access the service whereas the internal п¬Ѓrewall prevents them from connecting to protected internal hosts.
Example:
Figure 12-6: A section of a private network available for public access.
Lesson 12: Network Security
399
Copyright В© Element K Corporation
LESSON 12
Proxy Servers
Deп¬Ѓnition:
A proxy server is a system that isolates internal clients from the servers by downloading and storing п¬Ѓles on behalf of the clients. It intercepts requests for web-based or
other resources that come from the clients, and, if it does not have the data in its
cache, it can generate a completely new request packet using itself as the source, or
simply relay the request. In addition to providing security, the data cache can also
improve client response time and reduce network traffic by providing frequently used
resources to clients from a local source.
Example:
Figure 12-7: A proxy server isolates internal clients from the server.
Example: Proxy Server for Different Services
Depending on your traffic level and network needs, different proxy servers can be conп¬Ѓgured for different external services. For example, one proxy server can handle HTTP
requests, while another server can handle FTP content.
Proxy Servers vs. NAT
Both proxy servers and NAT devices readdress outgoing packets. However, NAT simply replaces the original source address on the packet. Proxy servers actually examine
the packet contents and then generate a new request packet, thus providing an additional level of protection between the original requesting client and the external
network.
Web Proxy Features
A proxy that grants access to the web is called a web proxy. Web proxies can incorporate a
number of enhanced features.
Feature
Description
User security
Enables an administrator to grant or deny Internet access based on user names or
group membership.
Gateway services
Enables proxies to translate traffic between protocols.
Auditing
Enables administrators to generate reports on usersвЂ™ Internet activity.
Remote access services
Provides access to the internal network for remote clients.
CompTIAВ® Network+В® (Exam N10-005)
400
Copyright В© Element K Corporation
LESSON 12
Feature
Description
Content п¬Ѓltering
Evaluates the content of websites based on words or word combinations, and
blocks content that an administrator has deemed undesirable.
Website Caching
The website caching process enables web proxies to cache web data for clients.
Step
Description
Step 1: Client request
The client requests data from a website.
Step 2: Packet intercepted
The proxy server intercepts the packet, generates a new request, and transmits
it to the website.
Step 3: Download content
The proxy server downloads all requested content, caches it, and sends it to
the client.
Step 4: Verify cache
If the client requests the same data, the proxy server intercepts the request,
veriп¬Ѓes that the п¬Ѓles are current based on the TTL values in its cache index,
and sends the cached data to the client.
Step 5: Update cache
If the п¬Ѓles are not current, the proxy server updates both cache contents from
the external website and the TTL on the cache.
Step 6: Purge cache
The proxy server purges its cache once the TTL value on an indexed item
expires.
Figure 12-8: Steps in caching web data.
Lesson 12: Network Security
401
Copyright В© Element K Corporation
LESSON 12
Keeping the Cache Current
One important danger of using a proxy server is that, if an external website updates its
contents before the TTL of the cache on the web proxy expires, a client might get outdated information from the web proxyвЂ™s cache. Proxy servers can use either passive or
active caching to ensure that cache data is current. In passive caching, the proxy server
does not cache any data marked as time sensitive, but sends repeated requests to external sites to ensure that data is current. In active caching, the proxy server proп¬Ѓles
cache indexes of websites based on the volume of use.
The proxy server actively refreshes the cache contents for sites that have had multiple
hits from internal clients. Another technique the proxy server can use is to request time
stamps from the external website, compare them to the stamp in its cache, and download only new data. The time stamp requests generate only a small amount of traffic
and eliminate unnecessary content downloads.
NAC
Deп¬Ѓnition:
Network Access Control (NAC) is a general term for the collected protocols, policies,
and hardware that govern access on device network interconnections. NAC provides an
additional security layer that scans systems for conformance and allows or quarantines
updates to meet policy standards. Security professionals will deploy a NAC policy
according to an organizationвЂ™s needs based on three main elements: the authentication
method, endpoint vulnerability assessment, and network security enforcement. Once
the NAC policy is determined, professionals must determine where NAC will be
deployed within their network structure.
Posture Assessment
Sometimes, authorization in NAC can be done using a compliance check. This process
is called posture assessment. In this process, a networkвЂ™s security is assessed based on
the security applications that are running on the network.
IEEE 802.1x
An IEEE standard is used to provide a Port-based Network Access Control (PNAC),
using the 802.11a and 802.11b protocols. 802.1x uses EAP to provide user authentication against a directory service.
CompTIAВ® Network+В® (Exam N10-005)
402
Copyright В© Element K Corporation
LESSON 12
Example:
Figure 12-9: NAC governs access on device network interconnections.
Access Control Lists
An Access Control List (ACL) is a set of data (user names, passwords, time and date,
IP addresses, MAC addresses, etc.) that is used to control access to a resource such as
a computer, п¬Ѓle, or network. ACLs are commonly implemented as MAC address п¬Ѓltering on wireless routers and access points. When a wireless client attempts to access the
network, that clientвЂ™s MAC address is compared to the list of authorized MACs and
access is granted or restricted based on the result.
Physical Network Security Measures
An organizationвЂ™s physical components have vulnerabilities that should be mitigated by
employing appropriate physical security measures.
Lesson 12: Network Security
403
Copyright В© Element K Corporation
LESSON 12
Physical
Resource
Building and
grounds
Vulnerabilities and Countermeasures
LocationвЂ”
вЂў Is the building located in a high-crime area or in a relatively remote location that
would be hard to access in the event of a natural disaster?
вЂў If so, what protections do you have in place to deter theft or vandalism, and to
recover from disaster?
вЂў Is it in a п¬‚ood area?
Fire risksвЂ”
вЂў Is the building adequately covered by a п¬Ѓre-suppression system?
вЂў Are critical systems and server rooms equipped with special п¬Ѓre-protection methods? Will a п¬Ѓre accident destroy the storage systems and will data be
compromised?
вЂў Is network cabling in the plenum areas of the building п¬Ѓre-resistant?
Electrical shieldingвЂ”Are the building and the network equipment protected from
electrical surges and other interference from the outside?
Physical access controlвЂ”
вЂў Are there physical barriers in place, such as fences, locks, mantraps, and monitored reception areas, to protect the building from unauthorized access?
вЂў Are strict physical access controls, such as biometric authorization, deployed to
restrict access to sensitive areas?
вЂў Is there video or still-image surveillance in place to deter or help prosecute any
unwanted access?
Devices
ServersвЂ”
вЂў Are all the servers in one physical location?
вЂў If someone gains access to a server room, does she have access to every server in
the company?
Laptops/PDAsвЂ”These items are easily misplaced or stolen and often contain highly
sensitive information.
Cell phonesвЂ”Conп¬Ѓdential conversations about proprietary company information
should be held on land lines and not over wireless channels that do not use encryption. You may also want to disallow the use of wireless devices altogether.
Communications
TelecommunicationsвЂ”Phone company cables, transformers, and switches can be
intentionally or unintentionally damaged or tapped.
Service providersвЂ”Third-party ISPs and other service providers may have security
holes that your organization has no control over. Can your provider maintain your
service if they have a loss or failure, and, if not, do you have a backup plan?
Wireless cellsвЂ”Are your wireless access points placed and secured properly so that
outside parties cannot connect to your network?
CompTIAВ® Network+В® (Exam N10-005)
404
Copyright В© Element K Corporation
LESSON 12
ACTIVITY 12-2
Describing Network Perimeter Security
Scenario:
In this activity, you will describe the network perimeter security concepts.
1.
In the NAT process, in which step does the NAT readdress the packet to the internal
system?
a) Source address conversion
b) Client request
c) Data delivery
d) Data return
2.
True or False? In IP filtering, dropped packets are delivered after a delay.
True
False
3.
Arrange the steps in the sequence as they occur in the NAT process.
The NAT device converts the source address in the request packet to its own external
address, and adds a reference port number to identify the originating client.
NAT uses the reference port number to identify the correct internal source address.
NAT readdresses the packet to the internal system and delivers the data.
The service returns data to the NAT deviceвЂ™s external address using the reference port
number.
An internal client sends a request to an external service, such as a website, using the
external destination IP address and port number.
4.
Match the firewall feature with its description.
Scanning services
Content п¬Ѓltering
Signature identiп¬Ѓcation
Zones
a.
Checks incoming and outgoing packets.
b. Creates a network topology with distinct areas.
c. Blocks restricted websites.
d. Veriп¬Ѓes if the data in question is
legitimate.
Lesson 12: Network Security
405
Copyright В© Element K Corporation
LESSON 12
TOPIC B
Intrusion Detection and Prevention
In the previous topic, you identiп¬Ѓed the tools and techniques used to secure the perimeter of
your network. However, there are several other mechanisms that you can use to secure the networks. In this topic, you will identify methods of threat detection and prevention.
At one time, computers were connected to an internal organizationвЂ™s network and most people
did not access the Internet on a daily basis. Since the mid-1980s, there is a tremendous surge
in Internet usage. With millions of connections comes the very real potential for malicious
attacks on an organizationвЂ™s network. As a network administrator, you must be aware of potential threats to your network and methods you can employ to protect data and resource
availability.
Intrusion Detection
Deп¬Ѓnition:
Intrusion detection is the process of monitoring the events occurring on a computer or
a network, and analyzing them to detect possible incidents. An вЂњincidentвЂќ is a violation
or an imminent threat of violation of both computer security policies and standard
security practices. Though this process cannot prevent intrusions from occurring, it is
predominantly used to monitor events, gather information, create a log of events, and
alert you to the incident. The incidents may be unintentional or deliberate, but many of
them are malicious. Intrusion detection can be performed manually or automatically.
Example: Audit Logs and Trails
The most popular way to detect intrusions is by using the audit data generated by the
operating system. It is a record of activities logged chronologically. Since almost all
activities are logged, it is possible that a manual inspection of the logs would allow
intrusions to be detected. Audit trails are particularly useful because they can be used
to establish the attackerвЂ™s guilt. In any case, they are often the only way to detect
unauthorized and subversive user activity.
IDSs
Deп¬Ѓnition:
An Intrusion Detection System (IDS) is software or hardware, or a combination of
both, that scans, audits, and monitors the security infrastructure for signs of attacks in
progress and automates the intrusion detection process. It is used to quickly detect
malicious behavior that compromises the integrity of a computer so that appropriate
action can be taken. IDS software can also analyze data and alert security administrators to potential infrastructure problems. An IDS can comprise a variety of hardware
sensors, intrusion detection software, and IDS management software. Each implementation is unique, depending on the security needs and the components chosen.
CompTIAВ® Network+В® (Exam N10-005)
406
Copyright В© Element K Corporation
LESSON 12
Figure 12-10: IDS detects an attack.
Example: OGC Financial GroupвЂ™s IDS
OGC Financial Group is a banking institution that has thousands of encrypted transactions everyday. They have offices all over the world and the transaction databases are
in use 24 hours a day, 7 days a week. In addition, OGC Financial Group has developed several Business-to-Business (B2B) web partnerships with brokerage houses and
insurance agencies. The highest priorities are conп¬Ѓdentiality and data integrity. To
detect intruders, OGC Financial Group has a system of IDS sensors on each segment
of the network to monitor all traffic within the system. In addition, IDS software is
installed on each web server and email server. Finally, each transaction database has
application-speciп¬Ѓc IDS utilities to monitor its own activity for anomalies.
Example: Snort
Snort is an open source free IDS software available for detecting and preventing intrusions. It is available at www.snort.org. This software has the capability to log data,
such as alerts and other log messages, to a database.
Firewalls vs. IDS
Both a п¬Ѓrewall and an IDS enforce network policies but the way they accomplish that
task is signiп¬Ѓcantly different. An IDS collects information and will either notify you of
a possible intrusion or block packets based on conп¬Ѓguration settings determined by a
deп¬Ѓned signature. A п¬Ѓrewall п¬Ѓlters traffic based on conп¬Ѓguration settings alone. It can
be helpful to keep in mind that many п¬Ѓrewall and IDS systems have functionality that
overlaps, or is integrated into the same device or system.
Types of IDSs
There are three general categories of IDSs that may be used alone or in combination.
Lesson 12: Network Security
407
Copyright В© Element K Corporation
LESSON 12
Category
Description
Network-based
An IDS that monitors network traffic and restricts (IPS) or alerts (IDS) when unacceptable traffic is seen in the system. It can be connected to a switch. An example
of an NIDS is Snort.
A network-based IDS primarily uses passive hardware sensors to monitor traffic on
a speciп¬Ѓc segment of the network. A network-based IDS cannot analyze encrypted
packets because they have no method for decrypting the data. They can sniff traffic
and send alerts about anomalies or concerns. Many network-based IDSs allow
administrators to customize detection rules so that they may be tailored to a speciп¬Ѓc environment.
Host-based
An IDS capability installed on a workstation or server to protect that device. It
monitors the computer internally, and detects which program accesses the particular resource(s). It checks the host completely, and gathers information from the п¬Ѓle
system, log п¬Ѓles, and similar places and detects any deviations from the security
policy.
A host-based system primarily uses software installed on a speciп¬Ѓc host, such as a
web server. Host-based IDSs can analyze encrypted data if it is decrypted before
reaching the target host. However, host-based IDSs use the resources of the host
they are installed on, and this can add to the processing time from other applications or services. Many host-based IDSs allow administrators to customize
detection rules so that they can be tailored to a speciп¬Ѓc environment.
Pattern- or
signature-based
An IDS that uses a predeп¬Ѓned set of rules that can be pattern-based or uses a signature provided by a software vendor to identify traffic that is unacceptable.
Anomaly- or
behavior-based
An IDS that uses a database of unacceptable traffic patterns identiп¬Ѓed by analyzing
traffic п¬‚ows. Anomaly-based systems are dynamic and create a baseline of acceptable traffic п¬‚ows during their implementation process.
Protocol-based
An IDS installed on a web server and used to monitor the protocol(s) used by the
computer. It contains a system or agent at the front end of a server that is used for
the monitoring and analysis of the communication protocol between a connected
device and the system.
Application
protocol-based
An IDS that monitors the application protocol(s) in use by the system. Contains an
agent that interfaces between a process, or between multiple servers and analyzes
the application protocol between two devices.
Application-based IDSs monitor traffic within or related to a speciп¬Ѓc application.
They may be used in conjunction with a network- or host-based IDS to add
another layer of protection to a critical application, such as a customer database.
Comparing Host- and Network-Based IDSs
This table will help you compare the two most popular types of IDS implementations.
Characteristic
Network-Based IDS
Host-Based IDS
Components
Primarily hardware sensors
Primarily software applications
Monitoring method
Monitors traffic on a speciп¬Ѓc
network segment
Monitors traffic on the host it is
installed on
Monitoring target
Packets for protocol anomalies
and known virus signatures
Log п¬Ѓles, inadvisable settings or
passwords, and other policy violations
CompTIAВ® Network+В® (Exam N10-005)
408
Copyright В© Element K Corporation
LESSON 12
Characteristic
Network-Based IDS
Host-Based IDS
Encrypted data
Cannot analyze encrypted data
Can analyze encrypted data if it is
decrypted before it reaches the target
host
Passive vs. active
Passive
Passive or active
Resource utilization
Uses resources from the network
Uses computing resources from the
host it is monitoring
Capabilities
Broad scope; very general
Narrow scope; very speciп¬Ѓc
Alerts
Management console or email
messages
Management console or email messages
Best use
To secure a large area with noncritical data, provides broadbased overall security; most cost
effective
To secure a speciп¬Ѓc resource, such as
a web server, that has critical data;
cost prohibitive
Management issues
Can be installed on a network
Service agreements or other policy
restrictions prevent the installation on
a host
Legal issues
Hard to use as evidence in a
lawsuit
May be admissible as evidence in a
lawsuit
Passive and Active IDSs
Deп¬Ѓnition:
An IDS can be either passive or active. A passive IDS detects potential security
breaches, logs the activity, and alerts security personnel. An active IDS does the same,
and then takes the appropriate action to block the user from the suspicious activity.
Some people consider the active IDS a type of Intrusion Prevention System (IPS), and
not a separate system.
Lesson 12: Network Security
409
Copyright В© Element K Corporation
LESSON 12
Example: An Active, Host-Based IDS
A large payroll management company uses a host-based IDS to monitor its network.
Because it manages the personal and п¬Ѓnancial information of thousands of employees
at hundreds of companies, security is a major concern. It uses an active IDS, so that it
can react to malicious activity and respond in real time. One night, it detects some suspicious activity, monitors the traffic, and modiп¬Ѓes the п¬Ѓle permissions as a safety
precaution.
A passive IDS may have detected the suspicious network traffic, but would have
logged it and sent an alarm to the network or security administrator; whereas the activity itself would not have been blocked.
IPSs
Deп¬Ѓnition:
An IPS, also referred to as a Network Intrusion Prevention System (NIPS), is an inline
security device that monitors suspicious network and/or system traffic and reacts in real
time to block it. An IPS may drop packets, reset connections, sound alerts, and can at
times even quarantine intruders. It can regulate traffic according to speciп¬Ѓc content,
because it examines packets as they travel through the IPS. This is in contrast to the
way a п¬Ѓrewall behaves, which blocks IP addresses or entire ports.
Example:
Network behavior analysis is a behavior-based IPS that constantly monitors network trafп¬Ѓc and identiп¬Ѓes potential threats such as DDoS, malware, and policy violations.
Figure 12-11: An IPS blocks suspicious network traffic.
Types of Intrusion Prevention Systems
There are two major types of IPS: host-based and network-based.
IPS
Description
HIPS
A Host-based IPS (HIPS) is an application that monitors the traffic from
a speciп¬Ѓc host or a list of host addresses. This method is efficient
because it blocks traffic from a speciп¬Ѓc host or an attack targeted against
a speciп¬Ѓc system. The host-based IPS is also effective against internal
attacks and threats from viruses, worms, Trojan horses, keyloggers,
among others.
CompTIAВ® Network+В® (Exam N10-005)
410
Copyright В© Element K Corporation
LESSON 12
IPS
Description
NIPS
A Network-based IPS (NIPS) monitors the entire network and analyzes
its activity. It detects malicious code and unsolicited traffic, and takes the
necessary action. The NIPS is built to identify distorted network traffic;
analyze protocols; and secure servers, clients, and network devices from
various threats and attacks. NIPS is deployed in an organization and is
considered a checkpoint to all incoming traffic.
Port Scanners
Deп¬Ѓnition:
A port scanner is a type of software that searches a network host or a range of IP
addresses for open TCP and UDP ports. A port scanner looks for open ports on the
target system and gathers information including whether the port is open or closed,
what services are running on that port, and any available information about the operating system. Administrators can use a port scanner to determine what services are
running on the network and potential areas that are vulnerable. A port scanning attack
occurs when an attacker scans your systems to see which ports are listening in an
attempt to п¬Ѓnd a way to gain unauthorized access.
Figure 12-12: A port scanner on a network.
When multiple hosts are scanned simultaneously or consecutively, it is called portsweeping.
Example: NMAP
NMAP is a widely available open source port scanner. It can rapidly scan a single host
or an entire network. It can determine what hosts are available on a network, what services are offered, what types of operating systems are being used, what types of
п¬Ѓrewalls are being used, and numerous other characteristics of the target.
Lesson 12: Network Security
411
Copyright В© Element K Corporation
LESSON 12
Port Scanning Utilities
There are many utilities available that potential attackers can use to scan ports on networks, including NMAP, SuperScan, and Strobe. Many utilities can be downloaded for
free from the Internet. Performing port scanning attacks is often the п¬Ѓrst step an
attacker takes to identify live systems and open ports to launch further attacks with
other tools.
Vulnerability Assessment Tools
A honeypot is a security tool that lures attackers away from legitimate network resources while
tracking their activities. Honeypots appear and act as a legitimate component of the network
but are actually secure lockboxes where security professionals can block the intrusion and
begin logging activities for use in court or even launch a counterattack. The act of luring individuals in could potentially be perceived as entrapment or violate the code of ethics of your
organization. These legal and ethical issues should be discussed with your organizationвЂ™s legal
counsel and human resources department.
Honeypots can be software emulation programs, hardware decoys, or an entire dummy network, known as a honeynet. A honeypot implementation often includes some kind of IDS to
facilitate monitoring and tracking of intruders. Some dedicated honeypot software packages
can be specialized types of IDSs.
Figure 12-13: A honeypot scanning for attacks.
Network Scanners
Network scanners are computer programs used for scanning networks to obtain user names,
host names, groups, shares, and services. Some network scanners provide information about
vulnerabilities or weak spots on the network. Network scanners are sometimes used by attackers to detect and exploit the vulnerabilities on a network. Network scanners are also known as
network enumerators.
CompTIAВ® Network+В® (Exam N10-005)
412
Copyright В© Element K Corporation
LESSON 12
Figure 12-14: A network scanner scanning for usernames on the network.
Popular Network Scanners
There are several network scanners available. NMAP, NESSUS, and QualysGuard are
popular among them.
ACTIVITY 12-3
Scanning for Port Vulnerabilities
There is a simulated version of this activity available on the CD-ROM that is shipped with this course. You can
run this simulation on any Windows computer to review the activity after class, or as an alternative to performing
the activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening
the C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Ensure that the services running on the Child## computer include Active Directory, DNS, and
Certiп¬Ѓcate Services. SuperScan is available in the C:\Data\Tools folder.
Scenario:
You are a network administrator for a large brokerage п¬Ѓrm and need to make sure your new
Windows Server 2008 R2 servers are secure by scanning them for open ports. The brokerage
п¬ЃrmвЂ™s IT department has had problems in the past with attackers getting access to applications
on servers by getting through the п¬Ѓrewall and accessing open ports on the servers. You have
already hardened your servers and now want to check your work.
Before connecting the new Windows Server 2008 R2 servers to your network, you need to
ensure that not only the base operating system is hardened, but also that no unnecessary ports
are open on the servers to minimize the likelihood of attacks. You are responsible for scanning
your Windows Server 2008 R2 computer.
Lesson 12: Network Security
413
Copyright В© Element K Corporation
LESSON 12
What You Do
How You Do It
1.
a. Navigate to the C:\Data\Tools folder.
Install SuperScan.
b. Double-click the superscan4 compressed
folder and in the folder, double-click the
SuperScan4 application.
c. In the Compressed (zipped) Folders dialog box, click Run.
2.
Use SuperScan to scan the default
ports on your server.
a. In the SuperScan 4.0 window, on the Scan
page, in the IPs section, in the
Hostname/IP text box, type Computer##
and select the Host and Service Discovery tab.
b. Verify that the UDP port scan and TCP
port scan check boxes are checked, and
that a default list of ports appears in each
scan area. The default ports are loaded
from a configuration file.
c. Select the Scan tab, and click the Start
button to start the scan.
3.
Examine the scan results.
a. When the scan is complete, click View
HTML Results.
b. The report opens in the browser window.
Scroll down to view a list of open ports.
The right column shows how the server
responds to a scan of each port.
c. Close all open dialog boxes and windows.
CompTIAВ® Network+В® (Exam N10-005)
414
Copyright В© Element K Corporation
LESSON 12
TOPIC C
Protect Network Traffic Using IPSec
When you secure network traffic, it is usually not a single operation. You need to consider
various types of traffic, such as LAN, WAN, and wireless communications. It makes sense to
use a method that you can apply in different types of situations. In this topic, you will learn
how to conп¬Ѓgure Internet Protocol Security (IPSec), a powerful, general-purpose technique for
protecting data on IP networks.
IPSec is a п¬‚exible and powerful tool that helps you to ensure that only authorized data is getting through your network systems, and that the data can be read exclusively by authorized
parties. So, IPSec can prevent hackers, both from hijacking a session and scanning the network
data for information. When used incorrectly, however, IPSec can also shut down legitimate
communications on your network. Therefore, learning to apply IPSec correctly is an
indispensible skill for any network professional.
IPSec
Internet Protocol Security (IPSec) is a set of open, non-proprietary standards that you can use
to secure data as it travels across the network or the Internet. IPSec uses an array of protocols
and services to provide data authenticity and integrity, anti-replay protection, non-repudiation,
and protection against eavesdropping and sniffing.
Figure 12-15: IPSec standards are used to secure data across networks.
Tunneling and Data Encryption with IPSec
IPSec in Tunnel mode is often used with L2TP. Data encryption is accomplished by
IPSec, which uses DES or 3DES encryption to provide data conп¬Ѓdentiality. IPSec can
also be used on its own to provide both tunneling and encryption of data.
IPSec System Support
Many operating systems support IPSec, including Windows Server 2008, Windows XP,
Linux, UNIX, the current version of NetWare, and Sun Solaris. Internetworking
devices, such as most routers, also support IPSec. While IPSec is an industry standard,
it is implemented differently in the various operating systems and devices.
Lesson 12: Network Security
415
Copyright В© Element K Corporation
LESSON 12
IPSec Protection Mechanisms
IPSec can protect your network communication using different mechanisms.
Protection
Mechanism
Description
Provides data
authenticity and
integrity
IPSec provides data authenticity and integrity by verifying the identities of the computers that are transmitting data to one another. In this way, IPSec can prevent IP
spooп¬Ѓng and man-in-the-middle attacks.
Protects against
replay attacks
IPSec provides anti-replay protection by using sequence numbers to protect the
integrity of the data being transmitted. Packets captured cannot be replayed later to
be used to gain unauthorized access to your network.
Prevents repudia- IPSec prevents repudiation by providing veriп¬Ѓcation that a computer sending infortion
mation is the computer it purports to be.
Protects against
eavesdropping
and sniffing
IPSec protects against eavesdropping and sniffing by providing data encryption
mechanisms to allow you to encrypt data as it travels across a network.
IPSec Modes
IPSec operates in one of two main modes: transport mode or tunnel mode.
IPSec Mode
Description
Transport mode
In transport mode, only the contents of the data packet are encrypted. Routing
takes place normally, as the IP header is still readable. Transport mode is used
for host-to-host communications.
Tunnel mode
In tunnel mode, the entire packet is encrypted and then wrapped in a new,
unencrypted packet. Tunnel mode is often used when creating VPNs using
IPSec.
CompTIAВ® Network+В® (Exam N10-005)
416
Copyright В© Element K Corporation
LESSON 12
IPSec Transport Protocols
IPSec uses two transport protocols, which use different methods to protect data. The two protocols can be employed separately or together.
IPSec Transport
Protocol
Description
Authentication
Header (AH)
protocol
Provides data integrity through the use of Message Digest Algorithm 5 (MD5) and
Secure Hash Algorithm (SHA) encryption techniques. AH takes an IP packet and
uses either MD5 or SHA to hash the IP header and the data payload, and then adds
its own header to the packet. The AH header is inserted into the packet behind the
original IP header but ahead of the TCP or UDP header and the ESP header (if you
are using AH and ESP together).
Among other things, the AH header consists of the Security Parameters Index (SPI),
the sequence number of the packet, and the hash data. The SPI helps the computer
keep track of the computers it is communicating with. The computer on the other
end receives the IP packet, calculates the hash value, and compares it to the data in
the AH header to verify the integrity of the payload. If the values do not match, the
packet is dropped.
Encapsulating
Security Payload
(ESP) protocol
Provides data integrity, as well as data conп¬Ѓdentiality (encryption), using one of two
encryption algorithms, DES or 3DES. Like AH, ESP uses MD5 or SHA to hash an
IP packetвЂ™s header and payload, but it includes the hash in the ESP authentication
data at the end of the packet instead of in the ESP header, which contains the packetвЂ™s sequence number and the SPI. The ESP header is inserted behind the IP header
and the AH header (if there is one) but before the IP payload. After the payload, you
will п¬Ѓnd the ESP trailer, which contains mostly padding (required by the ESP packet
format) and the ESP authentication data, where you will п¬Ѓnd the hash for verifying
data integrity. ESP encrypts only the payload and not the headers in IPSecвЂ™s transport
mode.
IKE
IPSec uses the Internet Key Exchange (IKE) protocol to create a master key, which in turn is
used to generate bulk encryption keys. IPSec computers never exchange the master key.
Instead, they agree on a prime number and a public key, which are used along with each computerвЂ™s private key to create another set of numbers that are shared between the computers.
The separate computers then use the Diffie-Hellman algorithm to calculate matching master
keys. Because no other computer can access the original private keys used to create the master
key, the master key is always secure.
Lesson 12: Network Security
417
Copyright В© Element K Corporation
LESSON 12
Figure 12-16: A master key generates encryption keys.
Diffie-Hellman Algorithm
The Diffie-Hellman algorithm is a cryptographic protocol that provides for secure key
exchange. Described in 1976, it formed the basis for most public key encryption
implementations, including RSA.
Security Associations
A Security Association (SA) is the negotiated relationship between two computers using IPSec.
It occurs in two phases. In Phase 1, the computers negotiate how communication will take
place, and agree on authentication, encryption, and master key generation. The resulting Phase
1 SA is bi-directional. Phase 2 produces two one-way SAs on each computer: one inbound and
the other outbound. The Phase 2 SA is used for the actual transmission of data. Each computer
can have multiple Phase 1 and Phase 2 SAs with different partners.
Figure 12-17: Security association between computers.
SA Lifetimes
By default, Phase 1 SAs last for one hour. This allows two computers to exchange data
using multiple Phase 2 SAs. You can conп¬Ѓgure SA lifetimes for a longer or shorter
duration in IPSec conп¬Ѓguration settings.
ISAKMP
Internet Security Association and Key Management Protocol (ISAKMP) is a protocol
used for setting up SA and cryptographic keys in an Internet environment. ISAKMP
only provides a framework for authentication and key exchange and is designed to be
key exchange independent. Protocols such as IKE provide authenticated keying material for use with ISAKMP.
CompTIAВ® Network+В® (Exam N10-005)
418
Copyright В© Element K Corporation
LESSON 12
IPSec Policies
Deп¬Ѓnition:
An IPSec policy is a set of security conп¬Ѓguration settings that deп¬Ѓne how an IPSecenabled system will respond to IP network traffic. The policy determines the security
level and other characteristics for an IPSec connection. Each computer that uses IPSec
must have an assigned policy. As policies work in pairs; each of the endpoints in a
network communication must have an IPSec policy with at least one matching security
method in order for the communication to succeed.
Example:
Figure 12-18: IPSec rules in the Secure Server Properties dialog box.
Example: Client Policy
A client policy is an IPSec policy that a client computer seeks if the server requests it.
Default IPSec Policies
In Windows systems, there are three default IPSec policies.
The вЂњclientвЂќ and вЂњserverвЂќ in the IPSec policies refer to which node initiates the session and does not
refer to the actual server or client.
Default IPSec
Policy
Description
Secure Server
The highest level of security is the Secure Server (Require Security)
policy. The session fails if the client cannot negotiate security with the
server.
Server
The middle level of security is the Server (Request Security) policy. The
server requests a secure session if the client can support it, but will accept
an open session.
Client
The lowest level of security is the Client (Respond Only) policy. The client negotiates security if the server requests it.
Lesson 12: Network Security
419
Copyright В© Element K Corporation
LESSON 12
IPSec Policy Rules
IPSec policies are composed of rules, and each rule has п¬Ѓve components.
Component
Description
IP п¬Ѓlters
Describe the protocol, port, and source or destination computer the rule applies
to.
Filter action
Speciп¬Ѓes how the system should respond to a packet that matches a particular
п¬Ѓlter. The system can permit the communication, or request, or require security.
Authentication
method
Enables computers to establish a trust relationship. Possible methods include
Kerberos, digital certiп¬Ѓcates, or a preshared key conп¬Ѓgured as part of the rule.
Tunnel setting
Enables computers to encapsulate data in a tunnel inside the transport network.
Connection type
Determines if the rule applies to local network connections, remote access connections, or both.
Windows IPSec Components
There are four main IPSec components.
Component
Description
IPSec policy agent
The IPSec policy agent is a service that runs on each Windows computer,
where it is displayed as the IPSec Services service.
IPSec driver
The IPSec driver implements the policy assigned to the system. Based on
policy requirements, the IPSec driver watches packets being sent and received
to determine if the packets need to be signed and encrypted.
Microsoft Management
Console (MMC)
The Microsoft Management Console (MMC) snap-in is used to manage IPSec
policies on Windows systems.
вЂў Use IPSec Security Monitor to monitor the status of IPSec on the local
system.
вЂў Use IP Security Policies to manage the conп¬Ѓguration and assignment of
IPSec policies on local or remote computers.
вЂў You can also use the IP Security Policies node in Group Policy or Local
Security Policy to manage IPSec policies.
IP security monitor
The IP security monitor provides a main mode and a quick mode to verify
IPSec statistics. Main mode statistics show information from the IKE. Quick
mode statistics show information about the IPSec driver.
CompTIAВ® Network+В® (Exam N10-005)
420
Copyright В© Element K Corporation
LESSON 12
How to Protect Network Traffic Using IPSec
Procedure Reference: Secure Network Traffic Using IPSec
To secure network traffic using IPSec:
1.
Create an appropriate IPSec policy or modify an existing policy.
2.
Deploy the policy by assigning it to the appropriate computers.
3.
Test the IPSec communications to verify that only secured hosts can communicate
with each other.
4.
Verify that the communications are secure by examining the network data with a
packet analyzer or an IPSec security monitoring tool.
Procedure Reference: Conп¬Ѓgure IPSec on Windows Server 2008 R2
There are several ways to conп¬Ѓgure IPSec on Windows Server 2008 R2. One method
to conп¬Ѓgure IPSec is:
1.
Conп¬Ѓgure the policy.
вЂў
Conп¬Ѓgure the policy for a local computer.
вЂў
2.
a.
Open the IP Security Policy Management snap-in.
b.
Choose Local Computer for the snap-in.
c.
Select IP Security Policies on Local Computer and choose Actionв†’
Create IP Security Policy.
d.
Use the IP Security Policy Wizard to create a new IP security policy.
Conп¬Ѓgure the policy at the domain level.
a.
Open the IP Security Policy Management snap-in.
b.
Choose the Active Directory domain for the snap-in.
c.
Double-click IP Security policies on Active Directory to display the
default IPSec policies.
d.
Open the properties for the appropriate security policy.
e.
In the Properties dialog box, modify the policy according to your security policy guidelines.
Assign the policy.
вЂў
To assign a policy to the local computer, select the policy you want to assign
and choose Actionв†’Assign.
вЂў
To deploy IPSec policies using the Group Policy window, assign the appropriate IPSec policy at the site, domain, or Organizational Unit (OU) level
using the Group Policy Management Editor window.
3.
Test the communications to verify that only secured hosts can communicate with
each other.
4.
Verify the secure communications for the local computer by using Windows IP
Security Monitor.
a. In the Windows IP Security Monitor window, expand your computer object.
b.
Expand the Main Mode folder and select the Security Associations folder.
Lesson 12: Network Security
421
Copyright В© Element K Corporation
LESSON 12
c.
5.
Open the properties for the security association object to see the authentication mode as well as the encryption and data integrity algorithms negotiated
for the security association.
Verify the active IP security policy for your domain.
a.
In the Windows IP Security Monitor window, expand your computer object.
b.
Select the Active Policy folder.
c.
Verify the details of the active policy assigned to your domain.
ACTIVITY 12-4
Identifying Windows IPSec Policies
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class or as an alternative to performing the
activity as a group in class. The activity simulation can be launched directly from the CD-ROM by clicking the
Interactives button and navigating to the appropriate one, or from the default installed dataп¬Ѓle location by opening the C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the EXE п¬Ѓle.
Scenario:
You are the network administrator performing some security tasks for OGC International,
which does consulting for military personnel. As the organization begins the process of adopting a security policy, you want to be sure you understand some basic ideas about Windows
IPSec policies and management tools.
CompTIAВ® Network+В® (Exam N10-005)
422
Copyright В© Element K Corporation
LESSON 12
What You Do
How You Do It
1.
a. Choose Startв†’Run.
Create a custom MMC console containing IP Security Policy
Management and IP Security Monitor.
b. In the Run dialog box, type mmc and click
OK.
c. Maximize the Console1 - Console Root
window.
d. Choose Fileв†’Add/Remove Snap-in.
e. If necessary, in the Available snap-ins
list, scroll down and select IP Security
Monitor and click Add.
f.
Select IP Security Policy Management
and click Add.
g. In the Select Computer or Domain dialog
box, select The Active Directory domain
of which this computer is a member and
click Finish.
h. Click OK to close the Add or Remove
Snap-ins dialog box.
i.
Choose Fileв†’Save As.
j.
In the Save As dialog box, in the File
name text box, enter IPSec Management
as the file name.
k. Click Save to save the console to the
default location.
Lesson 12: Network Security
423
Copyright В© Element K Corporation
LESSON 12
2.
Display the default IPSec policies.
a. In the IPSec Management window, doubleclick IP Security Policies on Active
Directory.
b. Double-click the Server (Request Security) policy.
c. In the Server (Request Security) Properties dialog box, select the General tab.
d. Read the text in the Description text box
and click Cancel.
e. Double-click the Client (Respond Only)
policy.
f.
In the Client (Respond Only) Properties
dialog box, select the General tab.
g. Read the text in the Description text box
and click Cancel.
h. Double-click the Secure Server (Require
Security) policy.
i.
In the Secure Server (Require Security)
Properties dialog box, select the General
tab.
j.
Read the text in the Description text box
and click Cancel.
CompTIAВ® Network+В® (Exam N10-005)
424
Copyright В© Element K Corporation
LESSON 12
3.
Examine the rule settings in the
Server policy.
a. Double-click the Server (Request Security) policy.
b. In the IP Filter List, verify that All IP
Traffic is selected and click Edit.
c. In the Edit Rule Properties dialog box,
note that ICMP and IP are listed by default
on the IP Filter List tab. Select the Filter
Action tab.
d. Verify the Request Security (Optional)
option is selected. Select the Authentication Methods tab. For traffic that
matches the filter, you can permit,
request, and require security.
e. Observe that the default authentication
method is Kerberos. Select the Tunnel
Setting tab.
f.
Observe that by default, no tunnel is
specified. Select the Connection Type
tab.
g. Observe that there are options by which
you can specify LAN or remote access connections. Click Cancel to close the Edit
Rule Properties dialog box.
h. Click Cancel to close the Server (Request
Security) Properties dialog box.
i.
4.
Close the IPSec Management window without saving.
If you want a Windows Server 2008 R2 computer to request negotiations for a secure
session but still communicate with a computer that does not respond to the request,
which default policy would you use?
a) Secure Server
b) Server
c) Client
5.
If you want a Windows Server 2008 R2 computer to require secure communications at
all times and not communicate with another computer that cannot negotiate a secure
session, which default policy would you use?
a) Secure Server
b) Server
c) Client
Lesson 12: Network Security
425
Copyright В© Element K Corporation
LESSON 12
6.
Which component of an IPSec policy rule describes the specific protocol, port, and
source computer or destination computer to which the rule should apply?
a) Connection type
b) Tunnel setting
c) Authentication method
d) IP filters
7.
True or False? You must explicitly assign a policy to a computer to apply policy settings
to that computer.
True
False
Lesson 12 Follow-up
In this lesson, you identiп¬Ѓed the major issues and technologies involved in network security.
With more and more network threats appearing every day, your responsibility as a networking
professional will be ensuring that your network environment provides the appropriate level of
security, without compromising network performance.
1.
Which of the security measures discussed in this lesson are you most familiar with?
Which ones are you most likely to implement or support in your network environment?
2.
What intrusion detection systems do you think will suit your organizationвЂ™s network?
CompTIAВ® Network+В® (Exam N10-005)
426
Copyright В© Element K Corporation
LESSON 13
LESSON 13
Lesson Time
2 hour(s), 20 minutes
Network Security Threats
and Attacks
In this lesson, you will identify network security threats and attacks.
You will:
вЂў
Identify threats and attacks to security on a network.
вЂў
Apply threat mitigation techniques.
вЂў
Educate users about their security responsibilities.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
427
LESSON 13
Introduction
Security is an ongoing process that includes setting up organizational security systems, hardening them, monitoring them, responding to attacks in progress, and deterring attackers. As a
network professional, you will be involved in all phases of that process. But, in order for that
process to be effective, you need to understand the threats and vulnerabilities you will be protecting your systems against. In this lesson, you will identify the various types of security
threats and vulnerabilities that you might encounter.
Unsecured systems can result in compromised data and, ultimately, lost revenue. But you cannot protect your systems from threats you do not understand. Once you understand the types of
possible threats and identify individuals who will try to use them against your network, you
can take the appropriate steps to protect your systems and keep your resources and revenue
safe from potential attacks.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂў
вЂ”
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
вЂ”
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
Topic C:
вЂ”
вЂў
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
Topic D:
вЂ”
4.5 Describe the purpose of conп¬Ѓguration management documentation.
вЂ”
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
TOPIC A
Network-Based Security Threats and
Attacks
In the previous topics, you identiп¬Ѓed security measures on a network. No matter how cautious
the network security systems are, computer networks continue to face some common security
risks. In this topic, you will identify security threats and attacks on a network.
One of the users on the network unknowingly connects a virus-infected п¬‚ash drive to her computer. The virus in the drive is programmed to spread and infect other computers on the
network. The network security team faces problems like this as part of their everyday work
schedule. As a part of the team that ensures the security of a network, it is essential that you
know about various threats to network security.
CompTIAВ® Network+В® (Exam N10-005)
428
Copyright В© Element K Corporation
LESSON 13
Physical Security
Physical security refers to the implementation and practice of various control mechanisms that
are intended to restrict physical access to facilities. In addition, physical security involves
increasing or assuring the reliability of critical infrastructure elements such as electrical power,
data networks, and п¬Ѓre suppression systems. Physical security may be challenged by a wide
variety of events or situations, including:
вЂў
Facilities intrusions
вЂў
Electrical grid failures
вЂў
Fire
вЂў
Personnel illnesses
вЂў
Data network interruptions
Physical Security Threats and Vulnerabilities
Physical security threats and vulnerabilities can come from many different areas.
Threat / Vulnerability
Description
Internal
It is important to always consider what is happening inside an
organization, especially when physical security is concerned. For
example, disgruntled employees may be a source of physical
sabotage of important network security-related resources.
External
It is impossible for any organization to fully control external
security threats. For example, an external power failure is usually
beyond a network technicianвЂ™s control because most organizations use a local power company as their source of electrical
power. However, risks posed by external power failures may be
mitigated by implementing devices such as a UPS or a generator.
Natural
Although natural threats are easy to overlook, they can pose a
signiп¬Ѓcant risk to the physical security of a facility. Buildings
and rooms that contain important computing assets should be
protected against likely weather-related problems including tornados, hurricanes, snow storms, and п¬‚oods.
Man-made
Whether intentional or accidental, people can cause a number of
physical threats. Man-made threats can be internal or external.
For example, a backhoe operator may accidentally dig up п¬Ѓber
optic cables and disable external network access. On the other
hand, a disgruntled employee may choose to exact revenge by
deliberately cutting п¬Ѓber optic cables.
Environmental Threats and Vulnerabilities
Natural, environmental threats pose system security risks and can be addressed with
speciп¬Ѓc mitigation techniques.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
429
LESSON 13
Environmental Threat
Effects and Mitigations
Fire
Fire, whether natural or deliberately set, is a serious network environment security threat because it can destroy
hardware and therefore the data contained in it. In addition,
it is hazardous to people and systems. You need to ensure
that key systems are installed in a п¬Ѓre-resistant facility, and
that there are high-quality п¬Ѓre detection and suppression
systems onsite so that the damage due to п¬Ѓre is reduced.
Hurricanes and tornados
Catastrophic weather events such as hurricanes and tornados are major network security threats due to the magnitude
of the damage they can cause to hardware and data. You
need to ensure that your information systems are wellcontained and that your physical plant is built to
appropriate codes and standards so that damage due to
severe weather is reduced.
Flood
A п¬‚ood is another major network security threat that can
cause as much damage as п¬Ѓre can. Your organization should
check the history of an area to see if you are in a п¬‚ood
plain before constructing your physical plant, and follow
appropriate building codes as well as purchase п¬‚ood insurance.
When possible, construct the building so that the lowest
п¬‚oor is above п¬‚ood level; this saves the systems when
п¬‚ooding does occur. Spatial planning together with protective planning in concurrence with building regulations and
functional regulations are precautionary measures that
should be looked into as well.
Extreme temperature
Extreme temperatures, especially heat, can cause some sensitive hardware components to melt and degrade, resulting
in data loss. You can avoid this threat by implementing
controls that keep the temperature in your data center
within acceptable ranges.
Extreme humidity
Extreme humidity can cause computer components, data
storage media, and other devices to rust, deteriorate, and
degrade, resulting in data loss. You can avoid this threat by
ensuring that there is enough ventilation in your data centers and storage locations, and by using temperature and
humidity controls and monitors.
Social Engineering Attacks
Deп¬Ѓnition:
A social engineering attack is a type of attack that uses deception and trickery to convince unsuspecting users to provide sensitive data or to violate security guidelines.
Social engineering is often a precursor to another type of attack. Because these attacks
depend on human factors rather than on technology, their symptoms can be vague and
hard to identify. Social engineering attacks can come in a variety of methods: in person, through email, or over the phone.
CompTIAВ® Network+В® (Exam N10-005)
430
Copyright В© Element K Corporation
LESSON 13
Example: Social Engineering Attack Scenarios
These are a few typical social engineering attack scenarios:
вЂў
An attacker creates an executable program п¬Ѓle (for example, a п¬Ѓle with a .vbs or
.exe п¬Ѓle extension) that prompts a network user for his user name and password.
The attacker then emails the executable п¬Ѓle to the user with the story that the user
must double-click the п¬Ѓle and log on to the network again to clear up some logon
problems the organization has been experiencing that morning.
вЂў
An attacker contacts a help desk pretending to be a remote sales representative
who needs assistance setting up his dial-in access. Through a series of phone
calls, the attacker obtains the phone number for remote access and the phone
number for accessing the organizationвЂ™s private phone and voice-mail system.
вЂў
An attacker sends an executable п¬Ѓle disguised as an electronic greeting card
(e-card) or as a patch for an operating system or a speciп¬Ѓc application. The unsuspecting user launches the executable, which might install email spamming
software or a key-logging program, or turn the computer into a remote вЂњzombieвЂќ
for the hacker.
Figure 13-1: A social engineering attack using the obtained password.
Social Engineering Targets
Social engineering typically takes advantage of users who are not technically knowledgeable, but it can also be directed against technical support staff if the attacker
pretends to be a user who needs help.
Social Engineering Types
Hackers use various types of social engineering attacks.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
431
LESSON 13
Social Engineering
Type
Description
Spooп¬Ѓng
This is a human- or software-based attack where the goal is to pretend to be
someone else for the purpose of concealing their identity. Spooп¬Ѓng can occur
by using IP addresses, network adapterвЂ™s hardware MAC addresses, and
email. If used in email, various email message headers are changed to conceal the originatorвЂ™s identity.
Impersonation
This is a human-based attack where an attacker pretends to be someone he is
not. A common scenario is when the attacker calls an employee and pretends
to be calling from the help desk. The attacker tells the employee he is reprogramming the order-entry database, and he needs the employeeвЂ™s user name
and password to make sure it gets entered into the new system.
Phishing
This is a common type of email-based social engineering attack. In a
phishing attack, the attacker sends an email that seems to come from a
respected bank or other п¬Ѓnancial institution. The email claims that the recipient needs to provide an account number, Social Security number, or other
private information to the sender in order to вЂњverify an account.вЂќ Ironically,
the phishing attack often claims that the вЂњaccount veriп¬ЃcationвЂќ is necessary
for security reasons.
Individuals should never provide personal п¬Ѓnancial information to someone
who requests it, whether through email or over the phone. Legitimate п¬Ѓnancial institutions never solicit this information from their clients. A similar
form of phishing called pharming can be done by redirecting a request for a
website, typically an e-commerce site, to a similar-looking, but fake, website.
Vishing
This is a human-based attack where the goal is to extract personal, п¬Ѓnancial,
or conп¬Ѓdential information from the victim by using services such as the telephone system and IP-based voice messaging services such as VoIP as the
communication medium. This is also called voice phishing or vishing.
Whaling
This is a form of phishing that targets individuals who are known to possess
a good deal of wealth. It is also known as spear phishing. Whaling targets
individuals that work in Fortune 500 companies or п¬Ѓnancial institutions
whose salaries are expected to be high.
Spam and spim
Spam is an email-based threat where the userвЂ™s inbox is п¬‚ooded with emails
which act as vehicles that carry advertising material for products or promotions for get-rich-quick schemes and can sometimes deliver viruses or
malware. Spam can also be utilized within social networking sites such as
Facebook and Twitter.
Spim is an IM-based attack similar to spam that is propagated through instant
messaging instead of through email.
Hoax
Hoax is any type of incorrect or misleading information that is disseminated
to multiple users through unofficial channels. Hoaxes can be relatively
benign, such as an email containing misinformation about historical facts.
However, hoaxes often improperly alert users to the existence of unsubstantiated virus threats.
Users then react in two ways: п¬Ѓrst, by widely disseminating the hoax email,
clogging communications systems, and possibly triggering a DoS condition.
Second, users react by following instructions in the hoax that direct them to
defend or secure their computer in an improper or unapproved manner. The
hoax email might, for example, use social engineering methods that direct
users to delete legitimate п¬Ѓles, or to go to websites and download п¬Ѓles that
might themselves contain actual viruses.
CompTIAВ® Network+В® (Exam N10-005)
432
Copyright В© Element K Corporation
LESSON 13
A well-known website that deals with hoaxes and urban legends is www.snopes.com.
Malicious Code Attacks
Deп¬Ѓnition:
A malicious code attack is a type of software attack where an attacker inserts some
type of undesired or unauthorized software, or malware, into a target system. In the
past, many malicious code attacks were intended to disrupt or disable an operating system or an application, or force the target system to disrupt or disable other systems.
More recent malicious code attacks attempt to remain hidden on the target system, utilizing available resources to the attackerвЂ™s advantage.
Potential uses of malicious code include launching DoS attacks on other systems; hosting illicit or illegal data; skimming personal or business information for the purposes
of identity theft, proп¬Ѓt, or extortion; or displaying unsolicited advertisements.
Example:
Figure 13-2: A malicious code attack.
Example: Viruses
Virus attacks are the most well-known type of malicious code attacks.
Evidence of a Malicious Code Attack
Malicious code is often combined with social engineering to convince a user that the
malware is from a trusted or benign source. Typically, you will see the results of malicious code in corrupted applications, data п¬Ѓles, and system п¬Ѓles, unsolicited pop-up
advertisements, counterfeit virus scan or software update notiп¬Ѓcations, or reduced system performance or increased network traffic. Any of these could result in
malfunctioning applications and operating systems.
Types of Malicious Code Attacks
Hackers launch several major types of malicious code attacks to target a system. The exact
method that is used to get malicious code onto a computer varies by attacker and attack type.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
433
LESSON 13
Malicious Code
Type
Description
Virus
A sample of code that spreads from one computer to another by attaching itself
to other п¬Ѓles. The code in a virus executes when the п¬Ѓle it is attached to is
opened. Frequently, viruses are intended to enable further attacks, send data back
to the attacker, or even corrupt or destroy data.
Worm
A piece of code that spreads from one computer to another on its own, not by
attaching itself to another п¬Ѓle. Like a virus, a worm can enable further attacks,
transmit data, or corrupt or erase п¬Ѓles.
Trojan horse
An insidious type of malware that is itself a software attack and can pave the
way for a number of other types of attacks. There is a social engineering component to a Trojan horse attack since the user has to be fooled into executing it.
Logic bomb
A piece of code that sits dormant on a target computer until it is triggered by a
speciп¬Ѓc event, such as a speciп¬Ѓc date. Once the code is triggered, the logic
bomb вЂњdetonates,вЂќ and performs whatever actions it was programed to do. Often,
this includes erasing and corrupting data on the target system.
Spyware
Surreptitiously installed malicious software that is intended to track and report
on the usage of a target system, or collect other data the author wishes to obtain.
Data collected can include web browsing history, personal information, banking
and other п¬Ѓnancial information, and user names and passwords.
Adware
Software that automatically displays or downloads advertisements when it is
used. While not all adware is malicious, many adware programs have been associated with spyware and other types of malicious software. Also, it can reduce
user productivity by slowing down systems and simply by creating annoyances.
Rootkit
Code that is intended to take full or partial control of a system at the lowest levels. Rootkits often attempt to hide themselves from monitoring or detection, and
modify low-level system п¬Ѓles when integrating themselves into a system.
Rootkits can be used for non-malicious purposes such as virtualization; however,
most rootkit infections install backdoors, spyware, or other malicious code once
they have control of the target system.
Botnet
A set of computers that have been infected by a control program called a bot
that enables attackers to exploit them and mount attacks. Typically, black hats
use botnets for DDoS attacks, sending spam email, and mining for personal
information or passwords.
Malware
Malware is malicious code, such as viruses, Trojans, or worms, which is designed to
gain unauthorized access to, make unauthorized use of, or damage computer systems
and networks.
Software Attacks
A software attack is any attack against software resources including operating systems,
applications, protocols, and п¬Ѓles. The goal of a software attack is to disrupt or disable
the software running on the target system, or to somehow exploit the target system to
gain access to it, to other systems, or to a network. Many software attacks are
designed to surreptitiously gain control of a computer so that the attacker can use that
computer in the future, often for proп¬Ѓt or for further malicious activity.
Black hats also use spam to deliver malware.
CompTIAВ® Network+В® (Exam N10-005)
434
Copyright В© Element K Corporation
LESSON 13
Types of Viruses
Viruses can be categorized into several types.
Virus Type
Description
Boot sector
Infects any disk based media. Writes itself into the boot sector of the disk. When
a system attempts to boot from the disk, the virus is moved onto the system.
Once on the system, the virus attempts to move itself to every disk placed in the
system.
Macro
A macro is a group of application-speciп¬Ѓc instructions that execute within a speciп¬Ѓc application. A macro virus uses other programsвЂ™ macro engines to
propagate. True macro viruses do not actually infect п¬Ѓles or data, but attach
themselves to the п¬ЃleвЂ™s template, document, or macro code. Microsoft OfficeВ®
products have been popular targets for macro viruses.
Mailer and mass
mailer
A mailer virus sends itself to other users through the email system. It simply
rides along with any email that is sent. A mass mailer virus searches the email
system for mailing lists and sends itself to all users on the list. Often, the virus
does not have a payload; its purpose is to disrupt the email system by swamping
it with mail messages in the form of a DoS attack.
Polymorphic
This type of virus can change as it moves around, acting differently on different
systems. It can sometimes even change the virus code, making it harder to
detect.
Script
A small program that runs code using the Windows scripting host on Windows
operating systems. It is written as a script in Visual Basic or JavaScript and
executes when the script runs. Scripts are often distributed by email and require
a user to open them.
Stealth
A stealth virus moves and attempts to conceal itself until it can propagate. After
that, it drops its payload.
See http://support.microsoft.com/kb/211607/en-us for more information on macro viruses in Microsoft products.
Virus Infection Methods
Viruses are an insidious threat because of their ability to replicate themselves and thus
spread to multiple systems. Viruses can use different propagation methods:
вЂў
A virus on a hard disk can attach itself to removable media including п¬‚ash drives,
removable hard drives, and multimedia devices, which are then shared.
вЂў
A virus on the Internet can attach itself to a п¬Ѓle. When a user downloads and runs
the п¬Ѓle, the virus is activated.
вЂў
A virus can attach to email. When a user opens or runs the attachment, the virus
is activated.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
435
LESSON 13
Buffer Overп¬‚ow
Deп¬Ѓnition:
Buffer overп¬‚ow is an attack that targets system vulnerability to cause the device operating system to crash or reboot, and may result in loss of data or execute rogue code on
devices. Buffer overп¬‚ow attacks typically target desktop and server applications; however, it is also possible for applications on wireless devices to be vulnerable to buffer
overп¬‚ows.
Example:
RADIUS, Diameter, and TACACS+ are subject to buffer overп¬‚ow attacks and other
software exploits.
Password Attacks
Deп¬Ѓnition:
A password attack is any type of attack in which the attacker attempts to obtain and
make use of passwords illegitimately. The attacker can guess or steal passwords, or
crack encrypted password п¬Ѓles. A password attack can show up in audit logs as repeatedly failed logons and then a successful logon, or as several successful logon attempts
at unusual times or locations.
Example:
Figure 13-3: Attacker guesses the password to gain network access.
Protecting Password Databases
Attackers know the storage locations of encrypted passwords on common systems,
such as the Security Accounts Manager (SAM) database on standalone Windows systems. Password-cracking tools take advantage of known weaknesses in the security of
these password databases, so security might need to be increased.
Types of Password Attacks
Hackers use several common categories of password attacks. Creating complex passwords can
increase the amount of time it takes for an attack to succeed.
CompTIAВ® Network+В® (Exam N10-005)
436
Copyright В© Element K Corporation
LESSON 13
Password Attack
Type
Description
Guessing
A guessing attack is the simplest type of password attack and involves an individual making repeated attempts to guess a password by entering different
common password values, such as the userвЂ™s name, a spouseвЂ™s name, or a signiп¬Ѓcant date. Most systems have a feature that will lock out an account after a
speciп¬Ѓed number of incorrect password attempts.
Stealing
Passwords can be stolen by various means, including sniffing network communications, reading handwritten password notes, or observing a user in the act of
entering the password.
Dictionary attack
A dictionary attack automates password guessing by comparing encrypted passwords against a predetermined list of possible password values. Dictionary
attacks are successful against only fairly simple and obvious passwords, because
they rely on a dictionary of common words and predictable variations, such as
adding a single digit to the end of a word.
Brute force attack
In a brute force attack, the attacker uses password-cracking software to attempt
every possible alphanumeric password combination.
Hybrid password
attack
A hybrid password attack utilizes multiple attack vectors including dictionary,
brute-force, and other attack methodologies when trying to crack a password.
IP Spooп¬Ѓng Attacks
Deп¬Ѓnition:
An IP spooп¬Ѓng attack is a type of software attack where an attacker creates IP packets
with a forged source IP address and uses those packets to gain access to a remote system. One sign of an IP spooп¬Ѓng attack is a network packet from an external source
that appears to have an internal source address.
Example:
Figure 13-4: An IP spoofing attack using a forged IP address.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
437
LESSON 13
Example: An IP Spooп¬Ѓng Attack on a UNIX Host
An attacker wants to access a UNIX host with an IP address of 192.168.0.77 and an
application that authenticates only hosts with 192.168.0.x addresses. If the attackerвЂ™s IP
address is 10.10.10.25, the application will not authorize packets from this source. So
the attacker creates IP packets with the forged source IP address of 192.168.0.10 and
sends those packets to the UNIX host. Because the networkвЂ™s border router has not
been conп¬Ѓgured to reject packets from outside the network with internal IP addresses,
the router forwards the packets to the UNIX host, where the attacker is authenticated
and given access to the system.
Non-Example: Other Spooп¬Ѓng Attacks
The term вЂњspooп¬ЃngвЂќ can also be used to describe any situation where the source of
network information is forged to appear legitimate. For example, the common social
engineering technique of phishing uses forged email to try to persuade users to respond
with private information.
IP Spooп¬Ѓng Attack Targets
IP spooп¬Ѓng attacks take advantage of:
вЂў
Applications and services that authenticate based on the IP address.
вЂў
Devices that run Sun RPC (Remote Procedure Call) or X Windows, the GUI system in UNIX systems.
вЂў
Services that have been secured using TCP wrappers.
вЂў
Legacy technologies such as NFS and UNIX вЂњrвЂќ commands such as rlogin.
вЂў
Routers that have not been conп¬Ѓgured to drop incoming external packets with
internal IP addresses as source addresses.
Session Hijacking Attacks
Deп¬Ѓnition:
A session hijacking attack involves exploiting a session to obtain unauthorized access
to an organizationвЂ™s network or services. It involves stealing an active session cookie
that is used to authenticate a user to a server and controlling the session. Session
hijacking attacks also initiate denial of service to either the clientвЂ™s system or the
server system, or both.
Example:
Figure 13-5: An attacker hijacking the session.
CompTIAВ® Network+В® (Exam N10-005)
438
Copyright В© Element K Corporation
LESSON 13
DoS Attacks
Deп¬Ѓnition:
A Denial of Service (DoS) attack is a type of network attack in which an attacker
attempts to disrupt or disable systems that provide network services, including:
вЂў
Flooding a network link with data to consume all available bandwidth.
вЂў
Sending data designed to exploit known п¬‚aws in an application.
вЂў
Sending multiple service requests to consume a systemвЂ™s resources.
вЂў
Flooding a userвЂ™s email inbox with spam messages, the genuine messages to get
bounced back to the sender.
Example:
Figure 13-6: DoS attacks on a server consuming all its resources.
DoS Targets
The attack can target any service or network device, but is usually mounted against
servers or routers, preventing them from responding to legitimate network requests. A
DoS attack can also be caused by something as simple as disconnecting a network
cable.
Smurf Attacks
Smurf attacks are a type of DoS attack that exploits vulnerabilities in ICMP by overloading a host with ping requests and clogging a network with traffic. Essentially,
smurf attackers create a false ICMP Echo Request (ping) packet that uses the address
of the targeted host as the source and a network broadcast address as the destination.
When a smurf attack is launched, every machine on the destination network returns a
packet to the victim. In well-orchestrated attacks, an attacker could cause the complete
crash of the target operating system as well as create substantial traffic that can cripple
a network.
DDoS Attacks
Deп¬Ѓnition:
A Distributed Denial of Service (DDoS) attack is a type of DoS attack that uses multiple computers on disparate networks to launch the attack from many simultaneous
sources. The attacker introduces unauthorized software called a zombie or drone that
directs the computers to launch the attack.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
439
LESSON 13
Example:
Figure 13-7: DDoS attacks using drones.
Man-in-the-Middle Attacks
Deп¬Ѓnition:
A man-in-the-middle attack is a form of eavesdropping where the attacker makes an
independent connection between two victims (two clients or a client and a server) and
relays information between the two victims as if they are directly talking to each other
over a closed connection, when in reality the attacker is controlling the information
that travels between the two victims. During the process, the attacker can view or steal
information to use it fraudulently.
Example:
Figure 13-8: A man-in-the-middle attack.
Example: A Man-in-the-Middle Attack
In a typical man-in-the-middle attack, the attacker sets up a host on a network with IP
forwarding enabled and a network-monitoring utility installed to capture and analyze
packets. After analyzing network traffic to determine which server would make an
attractive target:
CompTIAВ® Network+В® (Exam N10-005)
440
Copyright В© Element K Corporation
LESSON 13
1.
The attacker intercepts packets from a legitimate client that are destined for the
server.
2.
The attackerвЂ™s computer sends a fake reply to the client.
3.
The attackerвЂ™s computer forwards a fake packet to the server, which is modiп¬Ѓed
so the attackerвЂ™s computer looks like the original sender.
4.
The server replies to the attackerвЂ™s computer.
5.
The attackerвЂ™s computer replies to the server as if it were the original client.
6.
The attacker stores any valuable information contained in the packets, such as
sensitive data or user credentials, for use in future attacks.
Purpose of a Man-in-the-Middle Attack
Man-in-the-middle attacks are used to gain access to authentication and network infrastructure information for future attacks, or to gain direct access to packet contents.
Generally, there will be no signs that a man-in-the-middle attack is in progress or has
just taken place.
Eavesdropping Attacks
An eavesdropping attack or sniffД±ng attack uses special monitoring software to intercept private network communications, either to steal the content of the communication
itself or to obtain user names and passwords for future software attacks. Attackers can
eavesdrop on both wired and wireless network communications. On a wired network,
the attacker must have physical access to the network or tap in to the network cable.
On a wireless network, an attacker needs a device capable of receiving signals from
the wireless network. Eavesdropping is very hard to detect, unless you spot an
unknown computer leasing an IP address from a DHCP server.
Many utilities are available that will monitor and capture network traffic. Some of
these tools can only sniff the traffic that is sent to or received by the computer on
which they are installed. Other tools are capable of scaling up to scan very large corporate networks. Examples of these tools include: Wireshark, the Microsoft Network
Monitor Capture utility, tcpdump, and dsniff.
Port Scanning Attacks
Deп¬Ѓnition:
A port scanning attack is a type of network attack where a potential attacker scans the
computers and devices that are connected to the Internet or other networks to see
which TCP and UDP ports are listening and which services on the system are active.
Port scans can be easily automated, so almost any system on the Internet will be
scanned almost constantly. Some monitoring software can detect port scans, or they
might happen without your knowledge.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
441
LESSON 13
Example:
Figure 13-9: A port scanning attack.
Port Scanning Utilities
There are many utilities available that potential attackers can use to scan ports on networks, including Nmap, SuperScan, and Strobe. Many utilities can be downloaded for
free from the Internet. Performing port scanning attacks is often the п¬Ѓrst step an
attacker takes to identify live systems and open ports to launch further attacks with
other tools.
Example: Xmas Attack
The Xmas Scan is available on popular port scanners such as Nmap. It is mainly used
to check which machines are alive or reachable, and subsequently what ports are open
or responding, so that those machines or ports can be used as an avenue for a
follow-up attack. The type of port scanning attack uses an Xmas packet with all п¬‚ags
turned on in the TCP header of the packet. The name вЂњXmasвЂќ refers to all п¬‚ags being
вЂњonвЂќ (like lights) and so a packet is вЂњlit up like a Christmas tree.вЂќ
This scan is commonly known as a stealth scan due to its ability to hide the scan in
progress, and to pass undetected through some popular п¬Ѓrewalls, IDSs, and other systems. However, most modern-day IPSs can detect this type of scan.
Replay Attacks
Deп¬Ѓnition:
A replay attack is a network attack where an attacker captures network traffic and
stores it for retransmitting at a later time to gain unauthorized access to a speciп¬Ѓc host
or a network. This attack is particularly successful when an attacker captures packets
that contain user names, passwords, or other authentication data. In most cases, replay
attacks are never discovered.
CompTIAВ® Network+В® (Exam N10-005)
442
Copyright В© Element K Corporation
LESSON 13
Example:
Figure 13-10: A replay attack.
FTP Bounce Attacks
An FTP bounce attack targets the FTP vulnerability, which permits connected clients to open
other connections on any port on the FTP server. A user with an anonymous FTP connection
can attack other systems by opening a service port on the third system and sending commands
to that service.
ARP Poisoning Attacks
ARP poisoning occurs when an attacker redirects an IP address to the MAC address of a computer that is not the intended recipient. Before the attack can begin, the attacker must gain
access to the target network. Once the attacker has gained access to the network, he or she can
poison the ARP cache on the target computers by redirecting selected IP addresses to MAC
addresses that the attacker chooses. At this point, the attacker could choose to capture and/or
alter network traffic before forwarding it to the correct destination, or create a denial of service
condition by pointing the selected IP address at a nonexistent MAC address.
Figure 13-11: An ARP poisoning attack.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
443
LESSON 13
Wireless Security
Deп¬Ѓnition:
Wireless security is any method of securing your WLAN network to prevent unauthorized network access and network data theft. You need to ensure that authorized users
can connect to the network without any hindrances. Wireless networks are more vulnerable to attacks than any other network system. For one thing, most wireless devices
such as laptops, mobile phones, and PDAs search and connect automatically to the
access point offering the best signal, which can be coming from an attacker. Wireless
transmissions can also be scanned or sniffed out of the air, with no need to access
physical network media. Such attacks can be avoided by using relevant security protocols.
Example:
Figure 13-12: A wireless security environment.
Site Surveys
A site survey is an analysis technique that determines the coverage area of a wireless
network, identiп¬Ѓes any sources of interference, and establishes other characteristics of
the coverage area. While an authorized site survey is a standard part of planning or
maintaining a wireless network, unauthorized site surveys or compromise of the site
survey data can be a security risk. You use a site survey to help you install and secure
a wireless LAN.
Wireless Vulnerabilities
Wireless networks have an increasing number of speciп¬Ѓc vulnerabilities.
CompTIAВ® Network+В® (Exam N10-005)
444
Copyright В© Element K Corporation
LESSON 13
Wireless Threat /
Vulnerability
Description
Rogue access point
This is an unauthorized wireless access point on a corporate or private network.
Rogue access points can cause considerable damage to an organizationвЂ™s data.
They are not detected easily, and can allow private network access to many
unauthorized users with the proper devices. A rogue access point can allow manin-the-middle attacks and access to private information. Organizations should
protect themselves from this type of attack by implementing techniques to constantly monitor the system, such as installing an IDS.
Evil twins
These are rogue access points on a network that appear to be legitimate.
Although they can be installed both on corporate or private networks, typically
they are found in public Wi-Fi hotspots where users do not connect transparently
and automatically as they do in a corporate network, but rather select available
networks from a list.
Evil twins can be more dangerous than other rogue access points because the
user thinks that the wireless signal is genuine, making it difficult to differentiate
from a valid access point with the same name.
Interference
In wireless networking, this is the phenomenon by which radio waves interfere
with the 802.11 wireless signals. It usually occurs at homes because of various
electronic devices, such as microwaves, operating in a bandwidth close to that of
the wireless network. When this occurs, it causes the 802.11 signals to wait
before transmitting and the wait can be indeп¬Ѓnite at times.
Bluejacking
This is a method used by attackers to send out unwanted Bluetooth signals from
PDAs, mobile phones, and laptops to other Bluetooth-enabled devices. Because
Bluetooth has a 30-foot transmission limit, this is a very close-range attack. With
the advanced technology available today, attackers can send out unsolicited messages along with images and video.
These types of signals can lead to many different types of threats. They can lead
to device malfunctions, or even propagate viruses, including Trojan horses. Users
should reject anonymous contacts, and conп¬Ѓgure their mobile devices to the nondiscoverable mode.
Bluesnarп¬Ѓng
This is a method in which attackers gain access to unauthorized information on a
wireless device using a Bluetooth connection within the 30-foot Bluetooth transmission limit. Unlike bluejacking, access to wireless devices such as PDAs,
mobile phones, and laptops by bluesnarп¬Ѓng can lead to the exploitation of private information including email messages, contact information, calendar entries,
images, videos, and any data stored on the device.
War driving
The act of searching for instances of wireless networks using wireless tracking
devices such as PDAs, mobile phones, or laptops. It locates wireless access
points while traveling, which can be exploited to obtain unauthorized Internet
access and potentially steal data. This process can be automated using a GPS
device and war driving software.
WEP and WPA
cracking
The method used to crack the encryption keys used in WEP and WPA installations to gain access to private wireless networks. There are many tools available
that can aid attackers in cracking encryption keys, such as Aircrack.
War chalking
The act of using symbols to mark off a sidewalk or wall to indicate that there is
an open wireless network which may be offering Internet access.
IV attack
In this attack, the attacker is able to predict or control the Initialization Vector
(IV) of an encryption process. This gives the attacker access to view the
encrypted data that is supposed to be hidden from everyone else except for an
authentic user of the network.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
445
LESSON 13
Wireless Threat /
Vulnerability
Packet sniffД±ng
Description
An attack on wireless networks where an attacker captures data and registers
data п¬‚ows, which allow the attacker to analyze the data contained in a packet. In
its benign form, it also helps organizations monitor their own networks against
attackers.
In the terms war driving and war chalking, вЂњwarвЂќ stands for wireless access receiver.
There are common tools that can be used for war driving and war chalking, such as NetStumbler, Kismet,
Aircrack, and Airsnort.
Initialization Vectors
Initialization Vector is a technique used in cryptography to generate random numbers
to be used along with a secret key to provide data encryption.
ACTIVITY 13-1
Identifying Network Threats and Attacks
Scenario:
In this activity, you will identify various types of network threats and attacks.
1.
What is a macro virus?
a) A virus that is transmitted via email.
b) A virus that targets office productivity applications.
c) A virus that attacks the boot sector.
d) A virus that runs on the Windows scripting host.
2.
John is given a laptop for official use and is on a business trip. When he arrives at his
hotel, he turns on his laptop and finds a wireless access point with the name of the
hotel, which he connects to for sending official communications. He may become a victim of which wireless threat?
a) Interference
b) War driving
c) Bluesnarfing
d) Rogue access point
CompTIAВ® Network+В® (Exam N10-005)
446
Copyright В© Element K Corporation
LESSON 13
3.
A new administrator in your company is in the process of installing a new wireless
device. He is called away to attend an urgent meeting before he can secure the wireless network, and without realizing it, he forgot to switch the device off. A person
with a mobile device who is passing the building takes advantage of the open network
and hacks it. Your company may become vulnerable to which type of wireless threat?
a) Interference
b) War driving
c) Bluesnarfing
d) Rogue access point
4.
Every time Margaret decided to work at home, she would get frustrated with the poor
wireless connection. But when she gets to her office, the wireless connection seems
normal. What might have been one of the factors affecting MargaretвЂ™s wireless connection when she worked at home?
a) Bluesnarfing
b) Interference
c) IV attack
d) Evil twins attack
5.
A disgruntled employee removes the UPS on a critical server system and then cuts
power to the system, causing costly downtime. This physical threat is a(n):
a) Internal threat
b) External threat
c) Man-made threat
d) False alarm
6.
Why is a hoax dangerous?
a) The hoax is an actual virus that has the potential to cause damage.
b) Propagation of the hoax can create DoS conditions.
c) Users are annoyed by the hoax.
d) The hoax can include elements of a social engineering attack.
7.
Social engineering attempt or false alarm? A supposed customer calls the help desk and
states that she cannot connect to the e-commerce website to check her order status.
She would also like a user name and password. The user gives a valid customer company name, but is not listed as a contact in the customer database. The user does not
know the correct company code or customer ID.
Social engineering attempt
False alarm
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
447
LESSON 13
8.
Social engineering attempt or false alarm? A new accountant was hired and would like
to know if he can have the installation source files for the accounting software package, so that he can install it on his computer himself and start work immediately. Last
year, someone internal compromised company accounting records, so distribution of
the accounting application is tightly controlled. You have received all the proper documentation for the request from his supervisor and there is an available license for the
software. However, general IT policies state that the IT department must perform all
software installations and upgrades.
Social engineering attempt
False alarm
9.
While you are connected to another host on your network, the connection is suddenly
dropped. When you review the logs at the other host, it appears as if the connection is
still active. This could be a(n):
a) IP spoofing attack
b) DoS attack
c) Man-in-the-middle attack
d) Session hijacking attack
10. Response time on the website that hosts the online version of your product catalog is
getting slower and slower. Customers are complaining that they cannot browse the
catalog items or search for products. What type of attack do you suspect?
a) A Trojan horse attack
b) A spoofing attack
c) A social engineering attack
d) A DoS attack
11. Tina, the network analysis guru in your organization, analyzes a network trace capture
file and discovers that packets have been intercepted and retransmitted to both a
sender and a receiver during an active session. This could be a(n):
a) IP spoofing attack
b) Session hijacking attack
c) Replay attack
d) Man-in-the-middle attack
12. Your intranet webmaster, Tim, has noticed an entry in a log file from an IP address
that is within the range of addresses used on your network. But, Tim does not recognize the computer name as valid. Your network administrator, Deb, checks the DHCP
server and finds out that the IP address is not similar to any in their list of IP addresses
in that particular domain. This could be a(n):
a) IP spoofing attack.
b) Malicious code attack.
c) Man-in-the-middle attack.
d) Session hijacking attack.
CompTIAВ® Network+В® (Exam N10-005)
448
Copyright В© Element K Corporation
LESSON 13
13. Match a network-based attack with its description.
Social engineering
a.
DoS
b.
DDoS
c.
Man-in-the-middle
d.
ARP poisoning
e.
Disables systems that provide network services.
An attacker intercepts communications between two hosts.
Uses multiple computers on disparate
networks to launch an attack from
many sources concurrently.
An attacker redirects an IP address to
the MAC address of a computer that
is not the intended recipient.
Uses deception and trickery to convince unsuspecting users to provide
sensitive data.
14. Jason arrives at work in the morning and finds that he cannot log on to the network.
The network administrator says his account was locked at 3 A.M. due to too many
unsuccessful logon attempts. What type of attack do you suspect?
a) Man-in-the-middle
b) Password
c) Virus
d) Hijacking
15. Which of these examples can be classified as social engineering attacks?
a) A customer contacts your help desk asking for her user name and password because
she cannot log on to your e-commerce website.
b) A user gets a call from a person who states he is a help desk technician. The caller
asks the user to go to an external website and download a file so that the technician
can monitor the userвЂ™s system.
c) The CEO of your company calls you personally on the phone to ask you to fax salary
data to her personal fax number. The fax number she gives you is listed in the company directory, and you recognize her voice.
d) A user receives an email that appears to be from a bank; the bank says they need the
userвЂ™s name, date of birth, and Social Security number to verify account information.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
449
LESSON 13
TOPIC B
Apply Threat Mitigation Techniques
In the previous topics, you identiп¬Ѓed network security threats and attacks. Scanning a network
for threats and attacks will help you prevent most of them from materializing. In this topic,
you will mitigate and deter threats and vulnerabilities on a network.
No matter how secure a network may be, unfortunate events continue to happen. The network
administrators should be involved in planning for the worst-case scenarios and should have
strong mitigation and deterrent techniques in place, should something go wrong. In most organizations, security policies are the documents that have the greatest inп¬‚uence over the actions
taken and decisions made by network professionals. A well-constructed security policy is a
great weapon in the п¬Ѓght to preserve the safety and integrity of an institutionвЂ™s technical and
intellectual assets.
Software Updates
Software manufacturers regularly issue different types of system updates that can include
security-related changes to software.
System
Update Type
Description
Patch
A small unit of supplemental code meant to address either a security problem or a functionality п¬‚aw in a software package or operating system.
Hotп¬Ѓx
A patch that is often issued on an emergency basis to address a speciп¬Ѓc security п¬‚aw.
Rollup
A collection of previously issued patches and hotп¬Ѓxes, usually meant to be applied to
one component of a system, such as the web browser or a particular service.
Service pack
A larger compilation of system updates that can include functionality enhancements,
new features, and typically all patches, updates, and hotп¬Ѓxes issued up to the point of
the release of the service pack.
Patch Management
Patch management is the practice of monitoring for obtaining, evaluating, testing, and deploying software patches and updates. As the number of computer systems in use has grown over
recent years, so has the volume of vulnerabilities and corresponding patches and updates
intended to address those vulnerabilities. So, the task of managing and applying them can be
very time-consuming and inefficient without an organized patch management system. In typical
patch management, software updates are evaluated for their applicability to an environment
and then tested in a safe way on non-production systems. Finally, an organized plan for rolling
out a valid patch across the organization is executed.
CompTIAВ® Network+В® (Exam N10-005)
450
Copyright В© Element K Corporation
LESSON 13
Figure 13-13: Management of patches.
Patch Management Policies
Many organizations have taken to creating official patch management policies that
deп¬Ѓne the who, what, where, when, why, and how of patch management for that organization.
Patch Management Example
A patch management program might include:
вЂў
An individual responsible for subscribing to and reviewing vendor and security
patches and updating newsletters.
вЂў
A review and triage of the updates into urgent, important, and non-critical categories.
вЂў
An offline patch-test environment where urgent and important patches can be
installed and tested for functionality and impact.
вЂў
Immediate administrative вЂњpushвЂќ delivery of approved urgent patches.
вЂў
Weekly administrative вЂњpushвЂќ delivery of approved important patches.
вЂў
A periodic evaluation phase and вЂњpullвЂќ rollout for non-critical patches.
Antivirus Software
Deп¬Ѓnition:
Antivirus software is a category of protective software that scans computers and sometimes networks for known viruses, Trojans, worms, and other malicious programs.
Some antivirus programs attempt to scan for unknown harmful software. It is advisable
to install antivirus software on all computers, and keep it updated according to your
organizationвЂ™s patch management policy. In addition to detection, most antivirus software is capable of logging scan and detection information. These logs should be
monitored to make sure that scans are taking place and ensure that infections are
reported properly.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
451
LESSON 13
Figure 13-14: Antivirus software deployed in a working environment.
Example: Antivirus Use
Jim is in the process of preparing a new п¬Ѓle server for an internal group. While the
group that will be using the server is anxious to have it installed, Jim knows that the
system must be fully patched and the approved antivirus software installed prior to
connecting to the corporate network. Connecting an unpatched and unprotected system
to the network is a large vulnerability, even with the corporate п¬Ѓrewall between the
new system and the Internet. The antivirus software will provide a measure of protection against any malicious software that may be lurking undetected on the network.
The antivirus program will also scan all of the п¬Ѓles that users place onto the system or
modify while it is in use, guarding against infection from the userвЂ™s systems.
Adware and Spyware Protection
In addition to antivirus software, protection against adware and spyware is also necessary. While some antivirus software packages include protection against adware and
spyware, it is often desirable to maintain separate protection against adware and
spyware.
Updating Virus Deп¬Ѓnitions
The antivirus software vendor maintains and updates the libraries of virus deп¬Ѓnitions;
the customer must periodically update the deп¬Ѓnitions on all systems where the software
is installed. Most vendors provide an automatic update service that enables customers
to obtain and distribute current virus deп¬Ѓnitions on a schedule. Periodically, administrators should manually check to verify that the updates are current. When there is a
known active threat, administrators should also manually update deп¬Ѓnitions.
Enterprise Virus Solutions
Some vendors offer enterprise virus suites that include virus protection for all systems
in a company, automatic updating, and the ability to download and distribute updates
from a central server. Distributing the updates from a local server instead of obtaining
them directly from the vendor enables the antivirus administrator to review and verify
virus deп¬Ѓnitions before they are deployed.
Internet Email Virus Protection
Because almost all computer systems today are connected to the Internet, email is a source of
serious virus threats. Companies can implement Internet email virus protection by:
вЂў
Screening the Internet gateway computers for viruses.
вЂў
Employing reliable desktop antivirus software.
вЂў
Scanning incoming email between the Internet and the email server.
CompTIAВ® Network+В® (Exam N10-005)
452
Copyright В© Element K Corporation
LESSON 13
вЂў
Scanning email again at the system-level.
вЂў
If a virus attack is detected, disabling all Internet connections and isolating affected systems.
Figure 13-15: Antivirus deployed on different network locations.
Anti-Spam Software
A few different anti-spam solutions are available that you can implement to help prevent the
п¬‚ood of spam in your email.
Spam Target Area
Solutions
End users
End users can protect themselves against the п¬‚ood of spam using the following
methods:
вЂў Address munging is when end users use a fake name or address to post on
consumer websites or newsgroups. This can also include changing legitimate
addresses to make a вЂњno spamвЂќ statement.
вЂў Responding to spam emails can cause different issues. Once an email has
been responded to, the spammer can conп¬Ѓrm that the message was successfully received. The spammer will be sure to include that address again.
Spammers also use forged addresses that may look like a legitimate email
address. In this case a spammer may be using a zombie computer to relay
messages. A response will only cause more spam to be sent out.
вЂў By disabling HTML in email programs, you can prevent automatic downloading of images and attachments that may contain viruses.
вЂў Using disposable email addresses can be an effective way to guard against
unwanted spam by posting the address on a website and using it for only a
predetermined amount of time.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
453
LESSON 13
Spam Target Area
Solutions
Administrators
Administrators can use many different systems and services to guard against
spam within their organization. They can block messages from known spam
sources, or they can use a п¬Ѓltering system that will read messages and scan for
target words and phrases used in known spam email. They can also use a known
blacklist to block documented spamming sources from getting into a private network.
Email senders
Email senders use a number of automated methods in order to ensure that they
do not send out spam. A sender risks being added to the DNS blacklist if they
are perceived as a spam sender. Background checks, opt-in email lists, and spam
п¬Ѓltering and blocking incoming messages from users can enforce anti-spam
actions for consumer websites.
Research and law
enforcement
Researchers and law enforcement officials have joined the п¬Ѓght against spam.
This effort is an ongoing task that involves coordination of many parties, including ISPs and consumer companies. The parties must work together to investigate
potential spam opportunities, track activities, and gather evidence to stop further
spamming attacks. Research in this area is ongoing, so updated anti-spam solutions can be implemented.
Spam Detection Methods
Spam detection has become an important task to end users. There are many different
ways end users can protect themselves against spammers. Detection can include a п¬Ѓltering program that will detect speciп¬Ѓc words that are commonly used in spam
messages. The message may be rejected once the words are found. This can cause
issues if the detection system rejects legitimate messages that may contain one of the
key words.
Other detection methods are used to block IP addresses of known spammers or to pose
an email address that is not in use or is too old to collect spam. These methods can
help reduce the number of spam messages in your inbox. Some examples of anti-spam
software include SPAMп¬ЃghterВ®, iHateSpamВ®, CloudmarkВ® for Microsoft Outlook, and
BullGuardВ® Internet Security Suite.
DNS Blacklists
DNS blacklists (DNSBLs) are published lists that contain email addresses that are conп¬Ѓrmed as spam sources. Mail servers can be conп¬Ѓgured to scan these lists for
addresses and then п¬‚ag or reject them to avoid spreading spam within an organization.
Security Policies
Deп¬Ѓnition:
A security policy is a formalized statement that deп¬Ѓnes how security will be implemented within a particular organization. It describes the means the organization will
take to protect the conп¬Ѓdentiality, availability, and integrity of sensitive data and
resources, including the network infrastructure, physical and electronic data, applications, and the physical environment. It often consists of multiple individual policies.
All implemented security measures should conform to the stated policy.
CompTIAВ® Network+В® (Exam N10-005)
454
Copyright В© Element K Corporation
LESSON 13
Analogy:
A good security policy provides functions similar to a governmentвЂ™s foreign policy.
The policy is determined by the needs of the organization. Just as a nation needs a
foreign policy in part because of real and perceived threats from other countries, organizations also need a policy to protect their data and resources.
A nationвЂ™s foreign policy deп¬Ѓnes what the threats are and how the government will
handle those threats. A security policy does the same for an organization; it deп¬Ѓnes
threats to its resources and how those threats will be handled. A policy forms the plan
that ties everything together. Without a formal policy, you can only react to threats
instead of anticipating them and preparing accordingly.
Example: A Password Security Policy
A nuclear plant has a password policy to which all employees must adhere. Each
employee is responsible for using strong passwords and protecting those passwords
accordingly. It contains guidelines for strong passwords to use and weak passwords to
avoid.
Figure 13-16: Password policy of a nuclear plant.
Security Policy Components
Each subsection of a security policy typically consists of several standard components.
Component
Description
Policy statement
Outlines the plan for the individual security component.
Standards
Deп¬Ѓne how to measure the level of adherence to the policy.
Guidelines
Suggestions, recommendations, or best practices for how to meet the policy
standard.
Procedures
Step-by-step instructions that detail how to implement components of the
policy.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
455
LESSON 13
Windows Security Policies
Windows security policies are conп¬Ѓguration settings within Windows operating systems
that control the overall security behavior of the system. They are found in a policy
object in the Computer Conп¬Ѓguration\Windows Settings\Security Settings node. The
policies can be set on a centralized basis, through a Group Policy in Windows ServerВ®
systems, or can be set in the individual policy objects on each computer.
DISCOVERY ACTIVITY 13-2
Identifying a Security Policy
Setup:
You have a Windows Server 2008 R2 computer with the name Child##, where ## is a unique
number. Log on as Administrator with the password !Pass1234.
The policy document is stored on your workstation at C:\085708Data\
NuclearPlantPasswordPolicy.rtf.
Scenario:
As the new network administrator for a nuclear plant, you will also be involved in updating
documentation related to security policies. Before you can be effective in these new duties, you
have decided that you need to familiarize yourself with existing policy documents in the organization.
1.
Open and review the policy file. What type of policy document is this?
a) Acceptable use policy
b) Audit policy
c) Extranet policy
d) Password policy
e) Wireless standards policy
2.
Which standard policy components are included in this policy?
a) Statement
b) Standards
c) Guidelines
d) Procedures
3.
How often must system-level administrators change their passwords to conform to this
policy?
CompTIAВ® Network+В® (Exam N10-005)
456
Copyright В© Element K Corporation
LESSON 13
4.
To conform to this policy, how often must regular system users change their passwords?
5.
According to this policy, what is the minimum character length for a password and how
should it be constructed?
6.
Why is вЂњpassword1вЂќ not a good choice for a password?
Common Security Policy Types
Administrators use several common security policy types as part of most corporate security
policies.
Type
Description
Acceptable
Use Policy
Deп¬Ѓnes the acceptable use of an organizationвЂ™s physical and intellectual resources.
Audit Policy
Details the requirements and parameters for risk assessment and audits of the organizationвЂ™s information and resources.
Extranet Policy Sets the requirements for third-party entities that desire access to an organizationвЂ™s networks.
Password
Policy
Deп¬Ѓnes standards for creating password complexity. It also deп¬Ѓnes what an organization considers weak passwords and the guidelines for protecting password safety.
Wireless Standards Policy
Deп¬Ѓnes what wireless devices can connect to an organizationвЂ™s network and how to
use them in a safe manner that protects the organizationвЂ™s security.
Security Policy Standards Organizations
The SysAdmin, Audit, Networking and Security (SANS) Institute has identiп¬Ѓed a list
of standard policy types and policy templates, ranging from the acceptable encryption
policy to the wireless communication policy.
To view the complete list of policies from the SANS Institute, see www.sans.org/
resources/policies/.
Other organizations, such as the IETF, have provided RFC 2196 for different security
policies. To view RFC 2196, see www.cse.ohio-state.edu/cgi-bin/rfc/rfc2196.html.
ISO has published ISO/IEC 27002:2005, which is a standard for information security.
To view information on ISO/IEC 27002:2005, see www.iso.org.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
457
LESSON 13
Security Incident Management
Deп¬Ѓnition:
A security incident is a speciп¬Ѓc instance of a risk event occurring, whether or not it
causes damage. Security incident management is the set of practices and procedures
that govern how an organization will respond to an incident in progress. The goals of
incident management are to contain the incident appropriately, and ultimately minimize
any damage that may occur as a result of the incident. Incident management typically
includes procedures to log, and report on, all identiп¬Ѓed incidents and the actions taken
in response.
Example:
Inп¬ЃniTrade Financial has created a task force speciп¬Ѓcally designed to manage all
aspects of incident management within the company. The team carries out all operations using the security governance guidelines and procedures issued by management.
The task force is responsible for incident analysis, incident response, incident reporting, and documentation.
IRPs
Deп¬Ѓnition:
An Incident Response Policy (IRP) is the security policy that determines the actions
that an organization will take following a conп¬Ѓrmed or potential security breach. The
IRP usually speciп¬Ѓes:
вЂў
Who determines and declares if an actual security incident has occurred.
вЂў
What individuals or departments will be notiп¬Ѓed of.
вЂў
How and when they are notiп¬Ѓed.
вЂў
Who will respond to the incident and
вЂў
Guidelines for the appropriate response.
Example: AFR TravelвЂ™s IRP
AFR TravelвЂ™s IRP is highly detailed in some places, and highly п¬‚exible in others. For
example, the list of who should respond to an incident is broken down both by job
title and by equivalent job function in case a company reorganization causes job titles
to change. This same п¬‚exibility is given to the department titles. However, the majority
of the IRP consists of highly detailed response information that addresses how proper
individuals and authorities should be notiп¬Ѓed of an incident. Since some computer
attacks might still be ongoing at the time they are discovered, or some attacks might
take the communications network down entirely, AFR Travel has made sure that there
are multiple lines of secure communication open following an incident.
Incident Response Involvement
Incident response will usually involve several departments, and, depending on the
severity of the incident, may involve the media. The human resources and public relations departments of an organization generally work together in these situations to
determine the extent of the information that will be made available to the public. Information is released to employees, stockholders, and the general public on a need-toknow basis.
CompTIAВ® Network+В® (Exam N10-005)
458
Copyright В© Element K Corporation
LESSON 13
First Responders
A п¬Ѓrst responder is the п¬Ѓrst experienced person or a team of trained professionals that
arrive on the scene of an incident. In a non-IT environment, this term can be used to
deп¬Ѓne the п¬Ѓrst trained person, such as a police officer or п¬Ѓreп¬Ѓghter, to respond to an
accident, a damage site, or a natural disaster. In the IT world, п¬Ѓrst responders can
include security professionals, human resource personnel, or IT support professionals.
Change Management
Deп¬Ѓnition:
Change management is a systematic way of approving and executing change in order
to ensure maximum security, stability, and availability of information technology services. When an organization changes its hardware, software, infrastructure, or
documentation, it risks the introduction of unanticipated consequences. Therefore, it is
important that an organization be able to properly assess risk; to quantify cost of training, support, maintenance, or implementation; and to properly weigh beneп¬Ѓts against
the complexity of a proposed change. By maintaining a documented change management procedure, an organization can protect itself from potential adverse effects of
hasty change.
Example:
Jane has identiп¬Ѓed a new service pack that has been released that п¬Ѓxes numerous security vulnerabilities for the operating system on a server. The server that needs this
service pack is running a custom in-house application, and signiп¬Ѓcant down-time is not
acceptable. The company policy states that a change management form must be
approved for all service packs. The form comes back from the approval process with a
qualiп¬Ѓcation that the service pack must be tested on a lab system prior to deployment
on the production server. Jane applies the service pack in a lab and discovers that it
causes the custom in-house application to fail. The application must be sent back to the
software developers for testing before the service pack can be applied in production.
Figure 13-17: Change management of service packs.
How to Apply Threat Mitigation Techniques
By balancing the potential security threat with the cost of implementing and maintaining a
secure network, an administrator can mitigate data loss and ensure the proper level of network
functionality.
Guidelines:
To protect data on your network, follow these guidelines:
вЂў
Always be sure to download and install the latest operating system patches, and
updates for both server and client machines.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
459
LESSON 13
вЂў
Train users to recognize and deter social engineering attacks.
вЂў
Deploy intruder-detection and virus-protection software to monitor unauthorized
software activity, such as the presence of viruses, password-cracking software, or
Trojan horses.
вЂў
Limit physical access to the network to prevent the introduction of hardwarebased sniffers or unauthorized hosts.
вЂў
Require the use of strong, complex user passwords. Require passwords to be
changed on a regular basis.
вЂў
Employ strong authentication and encryption measures for data stored on network
servers.
вЂў
Use more than one form of authentication between devices to guard against IP
spooп¬Ѓng.
вЂў
Encrypt data during network transmission so that it cannot be read by sniffers.
вЂў
Conceal network address information with various technologies, including
п¬Ѓrewalls, Internet proxies, and address translation, to protect against spooп¬Ѓng and
hijacking.
вЂў
Enable security features included in operating systems.
вЂў
Run vulnerability scans.
In addition to the mitigation techniques to protect data in general, to secure wireless
traffic, you need to follow separate guidelines:
вЂў
Secure sensitive private data. Do not include any data on a wireless device, such
as a PDA, that you are not willing to lose if the device is lost or stolen.
вЂў
Install antivirus software if it is available for your wireless devices.
вЂў
Update the software on wireless devices and routers to provide additional functionality as well as to close security holes in wireless devices such as:
вЂ”
Disable the discoverable setting on Bluetooth connections to prevent
bluejacking and bluesnarп¬Ѓng attacks.
вЂ”
Set Bluetooth connections to hidden.
вЂў
Implement a wireless security protocol.
вЂў
Implement appropriate authentication and access control, such as MAC address
п¬Ѓltering or user authentication, against a directory service to prevent authentication attacks such as wardriving.
вЂў
Implement an intrusion detection system on the wireless network for monitoring
network activity to protect against rogue access point attacks and data emanation.
вЂў
Implement your hardware and software manufacturersвЂ™ security recommendations.
вЂў
Test the functionality of systems after hardening to ensure that required services
and resources are accessible to legitimate users.
вЂў
Document your changes.
CompTIAВ® Network+В® (Exam N10-005)
460
Copyright В© Element K Corporation
LESSON 13
Connection Method Security
The method or protocol that is used to communicate between two devices greatly
affects the security of those devices and the data they transmit. Insecure connection
methods do not provide any data security or encryption, allowing an attacker to capture and view any transmitted data. Secure connection methods provide at least some
encryption, making it much more difficult for an attacker to make use of any intercepted data. The following table groups common connection methods into two
categories: secure connection methods and insecure connection methods.
Category
Protocol
Secure connection methods
вЂў
вЂў
вЂў
вЂў
SSH
HTTPS
SNMPv3
SFTP
вЂў SCP
Insecure connection methods
вЂў Telnet
вЂў HTTP
вЂў FTP
вЂў RSH
вЂў RCP
вЂў SNMPv1/2
RSH and RCP
In UNIX, the rcp command is used to copy п¬Ѓles between systems. The rsh command can be used to start a shell to execute a command on a remote system without
needing to be logged in. The results will be sent directly to the administrator.
Example: Data Protection Methods
As a network professional, Sue is concerned about threats against her company from
hackers as well as from internal users. She deploys several safeguards against outside
intruders, including enterprise-wide virus-protection software. She has also deployed a
п¬Ѓrewall.
There are company-wide security policies in place to make sure that outside parties,
such as clients and vendors, cannot enter the building or use equipment without an
escort. Internally, Sue has implemented strong authentication measures so that users
cannot log on or access server data without valid credentials and strong passwords.
The most sensitive company data must be encrypted in storage and in transit, but universal data encryption affected network performance and was unacceptable to many
users. Sue also sends out regular bulletins to make sure users understand proper security procedures, and provides users with information to help them recognize viruses,
hoaxes, and other suspicious network activities.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
461
LESSON 13
Example: AFR TravelвЂ™s Wireless Network
AFR Travel is a small regional travel company with a central office and several branch
locations in shopping malls and other venues. AFR Travel has many travel consultants
and agents who use laptops to work in different locations within the main office or in
branch offices. They also use mobile devices to check email and web-based travel data
from any location. All wireless devices have antivirus software installed, and all software patches are kept up to date.
Wireless routers are also patched with the latest п¬Ѓrmware updates. AFR Travel
employs the 802.11i security protocol for data encryption. All authentication is performed through EAP against the Active Directory accounts database.
DISCOVERY ACTIVITY 13-3
Applying Threat Mitigation Techniques
Scenario:
In this activity, you will apply different threat mitigation techniques.
1.
When should an antivirus administrator manually check for virus updates?
a) When a known threat is active
b) After each automatic update
c) Never
d) On a daily basis
2.
Which are considered legitimate network security measures?
a) Requiring complex passwords.
b) Installing antivirus software.
c) Denying users the ability to log on.
d) Preventing users from storing data.
e) Restricting physical access to the network.
3.
You manage a small office network with a single gateway to an Internet service provider. The ISP maintains your corporate email on its own email server. There is an
internal server for file and print services. As the administrator for this network, where
should you deploy antivirus software?
a) Desktop systems
b) Gateway systems
c) Email server
d) File and print server
CompTIAВ® Network+В® (Exam N10-005)
462
Copyright В© Element K Corporation
LESSON 13
4.
Match the system update type with its description.
Patch
a.
System updates include those issued
to point of the release of the software.
b. Supplemental code meant to address
either a security problem or a functionality п¬‚aw.
c. A collection of previously issued system updates.
d. A system update issued on an emergency basis to address a speciп¬Ѓc
security п¬‚aw.
Hotп¬Ѓx
Rollup
Service pack
TOPIC C
Educate Users
You have acquired the skills you need to keep your security infrastructure healthy. But, security is the responsibility of all individuals in an organization, not just the professional security
team. In this topic, you will learn how to educate users about the need to follow appropriate
security practices in their day-to-day work.
An attacker calls Mary, poses as a network administrator, and hangs up after a brief conversation, after learning MaryвЂ™s user ID and password. John leaves his laptop on his desk, unlocked,
over the weekend, and it is stolen by a member of the cleaning crew. Tina always logs in to
her computer as Administrator with a blank password because it is easier. It is clear that none
of these users are following good security practices, and, if nobody told them how to do things
any better, it is not necessarily their fault. How can you prevent this scenario? It is your
responsibility to educate or coach your users about their individual security responsibilities. An
educated user is the IT professionalвЂ™s best partner in preventing security breaches.
Employee Education
Information security is not the exclusive responsibility of information professionals. A comprehensive security plan can succeed only when all members of an organization understand and
comply with the necessary security practices. IT professionals are often the ones responsible
for educating employees and encouraging their compliance with security policies.
The process of employee security education consists of three components.
Step
Description
Awareness
Education begins with awareness. Employees must be aware of the importance of information security and be alert to its potential threats.
Employees also need to be aware of the role they play in protecting an
organizationвЂ™s assets and resources. A network security professional can
create awareness through seminars, email, or information on a company
intranet.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
463
LESSON 13
Step
Description
Communication
Once employees are aware of security issues and the role they play in protecting the organizationвЂ™s assets, the lines of communication between
employees and the security team must remain open. Network security professionals can accomplish this by encouraging employees to ask questions
and provide feedback on security issues. Also, the security team must take
responsibility for keeping the workforce informed of ongoing security concerns and updated practices and standards.
Education
Employees should be trained and educated in security procedures, practices, and expectations from the moment they walk through the door.
EmployeesвЂ™ responsibility for organizational security starts the second they
join the organization and have access to the physical building and
resources, as well as the intellectual property inside. Education should continue as the technology changes and new information becomes available.
Education takes many forms, from training sessions to online courses
employees can take at work. Educated users are one of your best defenses
against social engineering attacks.
Online Resources
A common way to promote all phases of the employee education process is to provide
employees with access to security-related resources and information online. You can
provide proprietary, private security information, such as your corporate security policy
document, through an organizationвЂ™s intranet. You can also point employees to a number of reputable and valuable security resources on the Internet.
However, both you and the employee should be cautious whenever researching information on the Internet, as not all sources are trustworthy. Just because information is
posted on a website does not mean it is factual or reliable. Monitor the websites you
recommend to your employees periodically to make sure that they are providing worthwhile information, and encourage employees to verify any technical or security-related
information with a reliable third party before acting on the information or passing it
along to others.
Here are just a few of the valuable information security resources from technology
vendors and other organizations that you can п¬Ѓnd on the Internet:
вЂў
www.microsoft.com/security/default.mspx
вЂў
tools.cisco.com/security/center/home.x
вЂў
www.symantec.com/business/index.jsp
вЂў
www.sans.org
User Security Responsibilities
Because security is most often breached at the end-user level, users need to be aware of their
speciп¬Ѓc security responsibilities.
CompTIAВ® Network+В® (Exam N10-005)
464
Copyright В© Element K Corporation
LESSON 13
Security Area
Employee Responsibilities
Physical security
Employees should not allow anyone in the building without a proper ID.
Employees should not allow other individuals to вЂњpiggybackвЂќ on a single
ID badge. Employees should be comfortable approaching and challenging
unknown or unidentiп¬Ѓed persons in a work area. Access within the building
should be restricted to only those areas an employee needs to access for job
purposes. Hard copies of conп¬Ѓdential п¬Ѓles must be stored securely where
they are not visible to others.
System security
Employees must use their user IDs and passwords properly. This information should never be shared or written down where it is accessible to others.
All conп¬Ѓdential п¬Ѓles should be saved to an appropriate location on the network where they can be secured and backed up, not just on a hard drive.
Device security
Employees must use correct procedures to log off all systems and shut
down computers when not in use. Wireless communication devices must be
approved by the IT department and installed and secured properly. Portable
devices, such as laptops, PDAs, and cell phones, must be properly stored
and secured when not in use.
How to Educate Users
When you educate your users, you give them the ability to participate in the process of ensuring the security of the organization. Because many attacks involve the unwitting participation
of unsuspecting users, educating them to raise their level of awareness of proper security procedures can greatly increase the overall security of your organization.
Guidelines:
To educate your users on security practices, follow these guidelines:
вЂў
Train new users on how to use their computers, and applications, and follow organizational security policies. Focus on potential security problems throughout the
training.
вЂў
Post all relevant security policies so that they are easily available to all users.
вЂў
Notify users when changes are made to the policies. Educate them on the
changes.
вЂў
Test user skills periodically after training to ensure that they are implementing
proper security. For example, you can use planned social engineering attacks.
вЂў
Post information such as a link to http://hoaxbusters.org/ on the company
website to assist users in determining whether or not emails are hoaxes.
вЂў
Policies and procedures can be implemented so an organization can enforce conduct rules among employees. It is crucial that an organization distribute the
appropriate policies in order to reduce the likelihood of damage to assets and to
prevent data loss or theft.
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
465
LESSON 13
Example: Educating Users at OGC Financial Group
At OGC Financial Group, during new-hire orientation, all new employees are briefed
on the security standards of the company. A representative from the security team
shows them how to connect to the companyвЂ™s intranet and locate links to all the companyвЂ™s security policy documents from the security page. The security representative
also demonstrates basic system security procedures, such as how to create a strong
password.
After training, you email the address of the intranet security page to all new employees, along with the addresses of other Internet resources they can consult to identify
email threats, such as spam and hoaxes. Any time there is a change to any policy, you
update the policy and notify users of the change. Signiп¬Ѓcant policy changes are rolled
out in conjunction with security training refresher sessions, which all users must
attend.
DISCOVERY ACTIVITY 13-4
Educating Users
Scenario:
As a network professional for a new military subcontractor, one of your responsibilities is
coordinating the employee security education program. The plant has recently experienced several security incidents involving improper user behavior. Other IT staff and plant management
personnel have come to you for recommendations on how to implement proper employee training procedures to prevent similar problems in the future.
1.
A virus has spread throughout your organization, causing expensive system downtime
and corruption of data. You find that the virus sent to many users was an email attachment that was forwarded by an employee. The employee that received the original
email was fooled into believing the link it contained was a legitimate marketing survey. You quickly determine that this is a well-known email hoax that has already been
posted on several hoax-related websites. When questioned, this employee says that he
thought it sounded as if it could be legitimate, and he could not see any harm in вЂњjust
trying it.вЂќ How could better user education have helped this situation?
2.
What education steps do you recommend taking in response to this incident?
CompTIAВ® Network+В® (Exam N10-005)
466
Copyright В© Element K Corporation
LESSON 13
3.
You come in on a Monday morning to find laptops have been stolen from several
employeesвЂ™ desks over the weekend. After reviewing videotapes from the security
cameras, you find that as an employee exited the building through the secure rear
door on Friday night, she held the door open to admit another individual. You suspect
this individual was the thief. When you question the employee, she states that the
individual told her that he was a new employee who had not yet received his
employee badge, that he only needed to be in the building for a few minutes, and that
it would save him some time if she could let him in the back door rather than having to
walk around to the receptionist entrance. Your security policy states that no one without identification should be admitted through the security doors at any time, but the
employee says she was unaware of this policy. You ask her to locate the security policy
documents on the network, and she is unable to do so. How could better user education have helped this situation?
4.
What education steps do you recommend taking in response to this incident?
5.
One of your competitors has somehow obtained confidential data about your organization. There have been no obvious security breaches or physical break-ins, and you are
puzzled as to the source of the leak. You begin to ask questions about any suspicious
or unusual employee activity, and you start to hear stories about a sales representative from out of town who did not have a desk in the office and was sitting down in
open cubes and plugging her laptop into the corporate network. You suspect that the
sales representative was really an industrial spy for your competitor. When you ask
other employees why they did not ask the sales representative for identification or
report the incident to security, the other employees said that, given their understanding of company policies, they did not see anything unusual or problematic in the
situation. You review your security policy documents and, in fact, none of them refer
to a situation like this one. How could better user education have helped this situation?
6.
What education steps do you recommend taking in response to this incident?
Lesson 13: Network Security Threats and Attacks
Copyright В© Element K Corporation
467
LESSON 13
Lesson 13 Follow-up
In this lesson, you identiп¬Ѓed the main types of security threats and attacks you will face: social
engineering attacks, software attacks, network attacks, application attacks, and wireless attacks.
Understanding the types of threats and attacks you face is an important п¬Ѓrst step in learning
how to protect your network and respond to an intrusion.
1.
What type of attack is of the most concern in your environment?
2.
Which type of attack do you think might be the most difficult to guard against?
CompTIAВ® Network+В® (Exam N10-005)
468
Copyright В© Element K Corporation
LESSON 14
LESSON 14
Lesson Time
20 minutes
Network Management
In this lesson, you will identify the tools, methods, and techniques used in managing a network.
You will:
вЂў
Describe major system and network monitoring tools.
вЂў
Identify the major types of conп¬Ѓguration management documentation.
вЂў
Identify network performance optimization techniques.
Lesson 14: Network Management
469
Copyright В© Element K Corporation
LESSON 14
Introduction
You have designed your network, chosen the hardware and software it will require, and
secured it. Your next step is to manage your network for optimal performance. In this lesson,
you will investigate a number of monitoring tools and network management methods that will
help you determine your networkвЂ™s baseline and optimize your networkвЂ™s performance.
Managing your network for optimal performance is an essential task for network technicians to
understand and be able to perform. By monitoring your network, determining your networkвЂ™s
baseline, and optimizing your network to perform at its peak performance, your network can
provide reliable service to your users. An effectively managed network has low downtime and
improved availability of services no matter what the network size is. There are various network
monitoring and troubleshooting tools that can help you to achieve this outcome.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂў
вЂў
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.6 Explain the function of common networking protocols.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
4.2 Given a scenario, use appropriate hardware tools to troubleshoot connectivity
issues.
вЂ”
4.3 Given a scenario, use appropriate software tools to troubleshoot connectivity
issues.
вЂ”
4.4 Given a scenario, use the appropriate network monitoring resource to analyze
traffic.
вЂ”
4.6 Explain different methods and rationales for network performance optimization.
вЂ”
5.1 Given a scenario, implement appropriate wireless security measures.
вЂ”
5.2 Explain the methods of network access security.
Topic B:
вЂ”
3.8 Identify components of wiring distribution.
вЂ”
4.5 Describe the purpose of conп¬Ѓguration management documentation.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
4.1 Explain the purpose and features of various network appliances.
вЂ”
4.6 Explain different methods and rationales for network performance optimization.
CompTIAВ® Network+В® (Exam N10-005)
470
Copyright В© Element K Corporation
LESSON 14
TOPIC A
Network Monitoring
Monitoring the activities on your network is the п¬Ѓrst step in efficiently managing it. With
monitoring tools, you can compile information about your network that will help you manage
it. In this topic, you will use monitoring tools to analyze your networkвЂ™s performance.
There are several major types of monitoring tools that you can use to assess the overall functioning of your network and to diagnose the cause of general complaints such as вЂњThe network
is too slowвЂќ or вЂњIвЂ™m having problems getting on and off this server.вЂќ You can use these tools
to keep tabs on your networkвЂ™s performance, in order to recognize and correct problems as
well as to anticipate and eliminate problems before they disrupt services on the network.
Network Management
Network management is the management of functions such as operation, administration, maintenance, and provisioning of systems on a network using various activities, methods,
procedures, and tools. Operation deals with procedures that allow for the smooth running of
the network, and includes monitoring of the network to spot problems as they arise. Administration involves keeping track of the assignment and utilization of devices on the network.
Maintenance involves repairing and upgrading network components, and taking necessary measures to ensure that devices are running optimally. Provisioning assigns resources to support a
service.
Figure 14-1: Functions of network management.
Need for Network Management
Effective network management leads to improved QoS, reduced operating costs, and
increased revenue. The fundamental goal of network management is to make operations more efficient. The cost of ownership of the network should come down, and this
includes the cost of the equipment and operating the network.
Quality of the network and its services includes reliability and availability. Increased
revenue can be obtained through network management when a service provider attracts
more customers with management-related capabilities such as tracking accounting
charges online and conп¬Ѓguring service features over the web.
Lesson 14: Network Management
471
Copyright В© Element K Corporation
LESSON 14
Challenges of Network Management
Network management has its share of challenges. For one, the number of services to
be delivered over a network is usually large, and each of these services has speciп¬Ѓc
requirements relating to bandwidth, connections, and other similar requirements that
need to be fulп¬Ѓlled. These services along with other existing services on the network
impact the overall performance. Moreover, networks expand constantly and require
reconп¬Ѓguration and upgrades. Any new management tools must adapt to the network in
the shortest possible time, or they may impact network performance.
SNMP
Simple Network Management Protocol (SNMP) is an Application-layer protocol used to collect
information from network devices for diagnostic and maintenance purposes. SNMP includes
two components: management systems and agent software, which are installed on network
devices such as servers, routers, and printers. The agents send information to an SNMP manager. The SNMP manager can then notify an administrator of problems, run a corrective
program or script, store the information for later review, or query the agent about a speciп¬Ѓc
network device.
Figure 14-2: SNMP collects information from network devices for diagnostic purposes.
SNMP Versions
There are currently three versions of SNMP.
Version
Description
SNMPv1
Original speciп¬Ѓcation deп¬Ѓned in 1988.
SNMPv2
Introduced in 1993. Added several protocol operations and initial
security measures.
SNMPv3
Introduced in 2002. Added security features and remote conп¬Ѓguration
capabilities. Three important services added: authentication, privacy,
and access control.
CompTIAВ® Network+В® (Exam N10-005)
472
Copyright В© Element K Corporation
LESSON 14
Network Monitoring Tools
Network monitoring tools can, depending on the tool, capture traffic, analyze it, create logs,
alert you to events you deп¬Ѓne, monitor different interfaces such as routers, switches, and servers, indicate areas of traffic congestion, help you construct baselines, determine upgrade and
forecast needs, and generate reports for management.
Depending upon the purpose of network monitoring, there are various tools available.
Purpose
Tools
LAN monitoring
вЂў Remote Monitoring (RMON)
вЂў pathping
вЂў OpManager
вЂў Distinct Network Monitor
вЂў Solarwinds ipMonitorВ®
QoS monitoring
вЂў QoS parameters
вЂў Router parameters
вЂў Load balancing
вЂў
вЂў
вЂў
вЂў
NimBus
XenMon
RT Audio and RT Video
Avaya Converged Network AnalyzerВ®
Bandwidth monitoring
вЂў Netп¬‚ow analyzer
вЂў Rokario
вЂў DU Meter
WAN monitoring
вЂў
вЂў
вЂў
вЂў
Exinda
Router monitoring
CastleRock SNMPcВ®
Visual UpTimeВ®
вЂў AdvantNet
вЂў Observer
Throughput Testers
Throughput testers are software tools that can be used to measure network throughput
and capacity. These software tools send large data packets from one destination to
another and measure the time taken to transfer the packets. The throughput is then calculated by dividing the packet size by the time taken.
Connectivity Tools and Utilities
There are several built-in connectivity tools and utilities in Windows or UNIX operating systems that can be used to troubleshoot network connectivity issues. Connectivity
software utilities are used to troubleshoot connectivity issues. Some of these utilities
also support network monitoring. Ping, pathping, tracert, and netstat are examples of
connectivity utilities. Some popular third-party connectivity tools includes WiresharkВ®
and NagiosВ®.
Lesson 14: Network Management
473
Copyright В© Element K Corporation
LESSON 14
Network Monitoring Tool Categories
There are numerous software tools for managing or monitoring a network. These tools are generally part of an operating system such as Windows or UNIX. However, they are also available
as add-on applications. They are broadly classiп¬Ѓed into three functional categories: status, trafп¬Ѓc, and route monitoring tools.
Functional Category
Description
Status monitoring
Used to gather data related to the status of a network. Examples of these
tools include the ping and nslookup commands.
Traffic monitoring
Used to gather data related to the traffic generated in a network. The ping
command can be used as a traffic monitoring tool. The command used
repeatedly enables a user to calculate the percentage of packet loss. Another
example of a traffic monitoring tool is the iptrace command used in
UNIX systems. The command is used to measure the performance of gateways.
Route monitoring
Used to trace the route taken by packets and detect routing delays, if any.
Some examples of the route monitoring tools include the tracert and
arp commands.
Network Traffic Analysis
Network traffic analysis is the study of various network activities. It includes:
вЂў
Identiп¬Ѓcation of the inbound and outbound protocols.
вЂў
Checking whether the protocols acknowledge each other. This step helps identify if the
protocols communicate unidirectionally or bidirectionally.
вЂў
Identifying if ports are open and closed.
вЂў
Checking the traffic that passes through a п¬Ѓrewall.
вЂў
Checking throughput, threshold limits, and overall network performance.
вЂў
Tracing packets on the network.
вЂў
And, studying network utilization.
Port Filtering
Port п¬Ѓltering is a technique of selectively enabling or disabling TCP and UDP ports on computers or network devices. It ensures that no traffic, except for the protocol that the
administrator has chosen to allow, can pass through an open port. Port п¬Ѓltering works by
examining the packetвЂ™s header, source address, destination address, and port number. However,
a packetвЂ™s header can be spoofed; a sender can fake his IP address or any other data stored in
the header.
CompTIAВ® Network+В® (Exam N10-005)
474
Copyright В© Element K Corporation
LESSON 14
Figure 14-3: TCP and UDP ports disabled in computers on a network.
Traffic Filtering
TraffД±c п¬Ѓltering is a method that allows only legitimate traffic through to the network. It blocks
unwanted traffic, thereby minimizing valuable resource consumption. Traffic is п¬Ѓltered based
on rules that accept or deny traffic based on the source or destination IP address. Whenever a
п¬Ѓltering device receives traffic, it attempts to match the traffic with a rule. Firewalls and servers are the most commonly used traffic п¬Ѓltering devices. Some devices п¬Ѓlter traffic that
originate only from the internal network, while there are other sophisticated devices that can
п¬Ѓlter traffic from external networks also.
Figure 14-4: Data packets filtered by a firewall.
Lesson 14: Network Management
475
Copyright В© Element K Corporation
LESSON 14
Network Diagnostics
There are various tools available to perform network diagnostic tests to determine concern
areas and issues. The tools provide real-time issues and methods to troubleshoot most common
issues. Some of the activities performed by the diagnostics tools are:
вЂў
Monitor end-to-end application response time
вЂў
Analyze network traffic
вЂў
Manage device performance
вЂў
Monitor and alert availability, bandwidth utilization, and health of devices
вЂў
Provide network diagnostics for troubleshooting and resolving issues
вЂў
Offer network discovery tools that facilitate IP address management, port mapping, and
ping sweeps
Port mapping translates addresses of packets to a new address. The translated packets are then routed
based on the routing table.
вЂў
And, provide tools for real-time NetFlow analysis, conп¬Ѓguration, and device management
Ping Sweep
Establishes a range of IP addresses to locate active hosts within a given range. Ping
sweep can be performed by using tools such as fping and map.
System Performance Monitors
Deп¬Ѓnition:
A performance monitor is a software tool that monitors the state of services or daemons, processes, and resources on a system. Performance monitors track one or more
counters, which are individual statistics about the operation of different objects on the
system, such as software processes or hardware components. Some objects can have
more than one instance; for example, a system can have multiple CPUs.
When a counter value reaches a given threshold, it indicates that the object of the
counter may be functioning outside acceptable limits. Many operating systems include
basic network performance monitor tools, or you can obtain more complex third-party
tools, including network monitors that are based on the SNMP and Remote Monitoring
(RMON) systems designed to handle large clusters or server farms.
Example: The top Utility
Most Linux/UNIX systems provide a CPU usage monitoring tool called top as part of
their default installation. top can provide either a static snapshot, or a real-time display of the processes currently running on a given CPU. topвЂ™s various data displays
include columns for memory use, virtual memory, and the process ID. The -u п¬‚ag is
useful for ordering the list by CPU usage. The process with the highest use is displayed at the beginning of the list.
Example: Windows Reliability and Performance Monitor
Windows Reliability and Performance Monitorв„ў included in Windows Server 2008
allows network administrators to observe, monitor, and record a wide variety of
system-related information including CPU usage, network usage, process and thread
behavior, and memory usage.
CompTIAВ® Network+В® (Exam N10-005)
476
Copyright В© Element K Corporation
LESSON 14
Counter Threshold Values
System administrators generally take action when counter values they are monitoring
reach a threshold value. These values can be set in different ways that vary depending
on the monitoring tool and system. Some counters have thresholds that depend upon
the device or its criticality. You will need to consult the documentation from your
equipmentвЂ™s manufacturer, and establish a baseline for performance before setting these
thresholds.
Log Files
A log п¬Ѓle is a record of actions and events performed on an operating system. There
are three common types of log п¬Ѓles: system, general, and history п¬Ѓles.
Type
Description
System
System logs are often predetermined by the operating system
itself and are a record of events logged by the operating system.
General
General logs are a type of system logs that contain information
about device changes, installation/uninstallation of device drivers, and any other system changes.
History
History logs record information, such as the type of log, the
time of event occurrence, the name of the user who was logged
on at the time of the event (or who caused the event), keywords,
any identiп¬Ѓcation numbers, and what category (or categories) the
event belongs to. The format may differ based on the operating
system used.
Syslog
Syslog is a term used to deп¬Ѓne the process of logging program messages or data logs.
The term collectively includes the software or operating system that generates, reads,
and analyzes log п¬Ѓles.
Protocol Analyzers
Deп¬Ѓnition:
A protocol analyzer, or a network analyzer, is diagnostic software that can examine
and display data packets that are being transmitted over a network. It can examine
packets from protocols that operate in the Physical, Data Link, Network, and Transport
layers of the OSI model. Protocol analyzers can gather all information passed through
a network, or selectively record certain types of transactions based on various п¬Ѓltering
mechanisms. On a wired network, it is possible to gather information on all or just part
of a network. On a wireless network, traffic can be captured one wireless channel at a
time.
Lesson 14: Network Management
477
Copyright В© Element K Corporation
LESSON 14
Figure 14-5: A protocol analyzer with captured data.
There are numerous uses for a protocol analyzer, including:
вЂў
Analyzing current network traffic patterns and potential problems.
вЂў
Detecting possible network intrusions.
вЂў
Monitoring network usage for performance analysis.
вЂў
Filtering undesirable network traffic.
вЂў
Launching an eavesdropping attack.
Protocol Analyzer Functions
Different protocol analyzers have different levels of functionality. Some have only software components; others use a combination of hardware and software to gather and
analyze network information. High-end solutions usually provide support for more protocols, the ability to send test traffic, higher speeds, and more analytical information.
The product you will use depends on your environment and the needs of your network.
Example: The Windows Network Monitor Tool
Most Windows systems include a basic protocol analyzer tool called Network MonitorВ® that enables you to save each network capture to a log. There are two versions of
Network Monitor; one that ships with Windows but is not installed by default. You
must add it using Add/Remove Windows Components. This version of Network Monitor can only capture packets that travel to or from the computer on which it is
installed. There is also a full version of Network Monitor that is included with Systems
Management ServerВ®, and can be installed separately from the full Systems Management Server product. This version can capture packets sent to or from any computer on
the network.
Network Monitor can be downloaded from http://www.microsoft.com/download/en/
details.aspx?id=4865
Example: The UNIX netstat Utility
The netstat utility is included with most UNIX and Linux distributions. netstat
can provide a wide range of information, including open ports and sockets, packets
transmitted on those ports, routing tables, and multicast memberships.
CompTIAВ® Network+В® (Exam N10-005)
478
Copyright В© Element K Corporation
LESSON 14
Network Adapter Promiscuous Mode
To capture all packets sent on a network, protocol analyzers require a network adapter
and driver that support promiscuous mode operation. Promiscuous mode enables the
station running the analyzer to recognize all packets being sent over the network, irrespective of the source or destination.
In the promiscuous mode, a network card passes all network events to the operating
system. In normal modes of operation, network traffic that is not intended for the
adapter that received it is п¬Ѓltered out and not passed to the operating system, including
the error conditions that the protocol analyzer is designed to detect.
Network Fault Tolerance
Deп¬Ѓnition:
Fault tolerance is the ability of a network or system to withstand a foreseeable component failure and continue to provide an acceptable level of service. Fault tolerance
measures include protecting power sources, disks and data storage, and network components. The critical components of a network need to be fault-tolerant so as to ensure
base-level functioning of the network.
Example:
Figure 14-6: A backup server takes over when the main server fails.
Lesson 14: Network Management
479
Copyright В© Element K Corporation
LESSON 14
ACTIVITY 14-1
Monitoring Data on the Network
There is a simulated version of this activity available on the CD-ROM that shipped with this course. You can run
this simulation on any Windows computer to review the activity after class, or as an alternative to performing the
activity as a group in class. The activity simulation can be launched either directly from the CD-ROM by clicking
the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by opening the
C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Before You Begin:
Ensure that the Network Monitor 3.4 setup п¬Ѓle was placed in the C:\Data\Tools\ folder as part
of setup.
Scenario:
You want to use Network Monitor to capture data about your systemвЂ™s performance on the
network.
What You Do
How You Do It
1.
a. Navigate to C:\Data\Tools.
Install Network Monitor.
b. Double-click the NM34_x64 file and in the
Microsoft Network Monitor message box
click Yes.
c. In the Welcome screen of the Install wizard, click Next.
d. Accept the license agreement and click
Next.
e. Select the I do not want to use Microsoft
Update option and click Next.
f.
Click Complete, and click Install to begin
the installation.
g. Click Finish and close the Tools window.
CompTIAВ® Network+В® (Exam N10-005)
480
Copyright В© Element K Corporation
LESSON 14
2.
Use Network Monitor to capture data.
a. Choose Startв†’All Programsв†’Microsoft
Network Monitor 3.4в†’Microsoft Network Monitor 3.4.
b. In the Microsoft Update Opt-In message
box, click No.
c. In the Microsoft Network Monitor 3.4 window, in the Select Networks section, in
the Friendly Name list, check the
NDISWANBH check box.
d. Maximize the window.
e. In the Network Monitor window, click New
Capture.
f.
3.
Generate network traffic.
Click Start.
a. Click Startв†’Command Prompt, and in
the Command Prompt window, enter
ping 192.168.1.200
b. Enter ping 192.168.1.XX, where XX
corresponds to another studentsвЂ™ IP
address in the classroom. Repeat the ping
a few times to generate traffic.
c. Close the Command Prompt window.
d. Open a new browser window, and in the
address bar, click and enter
www.everythingforcoffee.com
e. Close the browser window.
4.
Stop the Network Monitor capture of
traffic and review the capture log.
a. In the Network Monitor window, click
Stop.
b. Select each frame and view the contents
in the details pane.
Lesson 14: Network Management
481
Copyright В© Element K Corporation
LESSON 14
c. On the right pane, in the Display Filter
text field, click and type http and then
click Apply.
d. View the plaintext content of the HTTP
frames. When you have finished, close the
Microsoft Network Monitor 3.4 window
without saving.
5.
What other kinds of network traffic did you observe by running Microsoft Network
Monitor?
TOPIC B
Conп¬Ѓguration Management
Documentation
In the previous topic, you identiп¬Ѓed the network monitoring tools you will be using to troubleshoot network issues. However, when troubleshooting usersвЂ™ problems, you may need to
reference the actual network conп¬Ѓguration documentation. In this topic, you will identify conп¬Ѓguration management documentation.
In case of a disaster, it is imperative that you already have critical documentation in place that
will help you rebuild as quickly as possible. Without detailed documentation, you would have
to rely on memory to determine your network layout, which would likely be very time consuming, costly, and ultimately inaccurate. A complete set of conп¬Ѓguration documentation will
give you a solid base from which you can begin rebuilding your network.
Network Administration
Network administration covers support functions required to manage a network. These include
functions that do not involve performing changes such as conп¬Ѓguring and tuning or the running of the actual network. Administration of a network includes activities such as designing
the network, tracking its usage, assigning addresses, planning upgrades to the network, taking
service orders from end users and customers, keeping track of network inventory, collecting
accounting data, and billing customers.
CompTIAВ® Network+В® (Exam N10-005)
482
Copyright В© Element K Corporation
LESSON 14
Conп¬Ѓguration Management
Conп¬Ѓguration management addresses setting up and changing the conп¬Ѓguration of the network
and its components. The information on conп¬Ѓguration management is present on managed
objects such as switches and routers. Conп¬Ѓguration management therefore involves the setting
up of parameters for these devices. There are three conп¬Ѓgurations of the network. The п¬Ѓrst one
is the static conп¬Ѓguration, which is the permanent conп¬Ѓguration of the network. The second
conп¬Ѓguration is the current running conп¬Ѓguration. The third conп¬Ѓguration is the planned conп¬Ѓguration, when the conп¬Ѓguration data changes as the network changes.
Conп¬Ѓguration management is the application of network management that focuses on maintaining a database of the hardware and software components on a network. The database stores a
detailed inventory of network elements such as the part number, version number, description,
wire schemes, and a record of the network topology being implemented. The database is
updated as the network grows or shrinks. The arp command facilitates in updating this database because it can discover any new network component having an IP address.
Figure 14-7: A configuration management database that stores information about the
network topology.
Network Documentation
Although each network is unique, there are common documents that each network administrator should have at hand.
Document
Used to
Network maps
Provide the location and routing information for network devices. They are also
known as network diagrams.
Device information
List the hardware, software, and conп¬Ѓguration information for each device on the
network. This includes serial numbers and software license keys, unique identiп¬Ѓcations, and date. Changes to device information should be noted and dated as
they occur. Special cases should be called out so that a new network administrator can come up to speed quickly.
Lesson 14: Network Management
483
Copyright В© Element K Corporation
LESSON 14
Document
Used to
Utilization statistics
Provide usage logs and reports to measure network utilization and performance.
Policies and procedures
Provide guidelines and the appropriate method for performing network management tasks. Documented procedures can include: hardware selection, new user
creation, security policies and procedures, and troubleshooting tips.
Physical Network Diagrams
Deп¬Ѓnition:
A physical network diagram is a diagrammatic representation of the locations of all
network devices and endpoints, and depicts their connections with one another. A network diagram illustrates the physical relationship between nodes, but not necessarily
their exact location in a building or a п¬‚oor.
A physical network diagram typically depicts:
вЂў
Routers and switches
вЂў
Servers
вЂў
Workstations, printers, and fax machines
вЂў
Remote access equipment
вЂў
Firewalls
вЂў
Wireless access points
вЂў
Cable management information
вЂў
CSU/DSU
Example:
Figure 14-8: A physical network diagram.
CompTIAВ® Network+В® (Exam N10-005)
484
Copyright В© Element K Corporation
LESSON 14
Floor Plans
You may also want to include a п¬‚oor plan in your physical network diagram. A п¬‚oor
plan or physical layout should also include the locations of the demarc, wiring closets,
and cable runs.
Wiring Schematic
Network wiring schematic or wiring diagram is a combination of a п¬‚oor plan and a
physical network topology diagram. As with physical network diagrams, you can see
the nodes on the network and how they are physically connected. Schematics show the
nodes and network wiring superimposed on a п¬‚oor plan of the facility with the actual
equipment and cables depicted on the schematic in their real-world locations.
Just as it is possible to follow a map from one place to another, it should be possible
to use a wiring schematic to locate nodes and follow wires within a facility. The schematic is usually drawn to scale so that it is easy to estimate distances and locate drops,
wiring closets, and cable runs. Cable management techniques and tools can be used to
group and organize cables together to keep them out of the way and hidden from the
general working space.
IT Asset Management
IT asset management is the set of management policies that include information about
the п¬Ѓnancial and contractual speciп¬Ѓcations of all the hardware and software components present in an organizationвЂ™s inventory. Some organizations have exclusive asset
management for hardware and software components.
Logical Network Diagrams
A logical network diagram documents the protocols and applications that control the п¬‚ow of
network traffic. Logical network diagrams do not attempt to depict the physical relationship of
the nodes; rather, they show how the data should move, regardless of the physical implementation. A logical network diagram depicts:
вЂў
IP addresses of each network device
вЂў
FQDN of a device
вЂў
Application type of each server
вЂў
Trust relationships that exist between nodes
вЂў
The routing topology
Lesson 14: Network Management
485
Copyright В© Element K Corporation
LESSON 14
Figure 14-9: A logical network diagram.
Critical Hardware and Software Inventories
Hardware and software inventories provide insurance documentation and help determine what
you need to rebuild the network.
Hardware Inventory Entry
Information to Include
Standard workstation
A basic description of a standard client workstation. Include minimum
requirements and the installed operating system as well as how many
workstations of this type are deployed. For workstations that deviate
from the norm, be sure to document the deviations.
Specialty workstation
A description of any specialty workstations deployed. Include a brief
description of their roles and special conп¬Ѓgurations implemented on
them.
Basic server
A list of the basic server hardware conп¬Ѓguration and the role of these
servers. List their internal hardware and any special conп¬Ѓguration settings and software. Include a conп¬Ѓguration list for the operating system.
Connectivity hardware
A list of all connectivity hardware in as much detail as possible. This
includes the device brand and model numbers, but a description of each
feature ensures that replacements can be made without research.
Backup hardware
Document critical information about backup hardware, such as the vendor and model number of a tape drive, backup hard drives, DVD
drives, and network attached storage, if applicable.
The critical inventory includes various software elements of a network.
CompTIAВ® Network+В® (Exam N10-005)
486
Copyright В© Element K Corporation
LESSON 14
Software Inventory Entry
Information to Include
Operating system software
All operating system software, including desktop and server operating
systems. Include documentation on licensing and copies of the bulk
licenses, if possible. Many vendors retain records of software licenses
sold to their customers. If this is the case, include this fact in your
documentation.
Productivity and application
software
Off-the-shelf productivity software, including any applications installed
on client machines and servers.
Maintenance utilities
The utilities used to maintain a network, especially backup software
and software conп¬Ѓguration.
Backup documentation
Records of when backups were made, how frequently to make them,
what backups contain, where backups are stored, and credentials needed
to restore backups. Document the backup software and version. Special
setup and conп¬Ѓguration considerations need to be documented too.
Overall asset inventory
If your company maintains an overall asset inventory, attach a copy.
Many companies use the inventory as a base to track hardware and
maintenance. This usually includes most of the information needed.
Network Policies
Deп¬Ѓnition:
A network policy is a formalized statement or set of statements that deп¬Ѓnes network
functions and establishes expectations for users, management, and IT personnel. It
describes, in detail, the acceptable use policies of network equipment for a particular
organization, including the appropriate methods to maintain, upgrade, and troubleshoot
the network. Policies may also include speciп¬Ѓc information about security and network
functioning such as the use of removable drives and other detachable media, instant
messaging, wireless devices, the Internet, backup storage, network monitoring procedures, and vendor agreements. Network policies may include other areas of network
functioning depending on the size and needs of an organization.
Lesson 14: Network Management
487
Copyright В© Element K Corporation
LESSON 14
Example:
Figure 14-10: Network policy defines network functioning.
Network Policy Components
Each subsection of a network policy typically consists of several standard components.
Policy Component
Description
Policy statement
The policy statement outlines the plan for individual components.
Standards
Standards deп¬Ѓne how to measure the level of adherence to the policy.
Guidelines
Policy guidelines are suggestions, recommendations, or best practices for
how to meet the policy standard.
Procedures
Procedures are step-by-step instructions that detail how to implement components of the policy.
Legal Compliance Requirements and Regulations
All organizations must consider their legal obligations, rights, liabilities, and limitations when
creating policies. Because incidents can potentially be prosecuted as technology crimes, organizations must be prepared to work with civil authorities when investigating, reporting, and
resolving each incident. Information security practices must comply with legal requirements
that are documented in other departmental policies, such as human resources. A companyвЂ™s
response to any incident must conform to the companyвЂ™s legal limitations as well as the civil
rights of individuals involved.
Types of Legal Requirements
Legal issues can affect different parties within each organization.
CompTIAВ® Network+В® (Exam N10-005)
488
Copyright В© Element K Corporation
LESSON 14
Affected Party
Legal Considerations
Employees
Who is liable for misuse of email and Internet resourcesвЂ”the organization,
the employee, or both?
What is the extent of liability for an organization for criminal acts committed by its employees?
What rights to privacy do employees have regarding electronic communications?
Customers
What customer data is considered private and what is considered public?
How will a company protect the privacy and conп¬Ѓdentiality of customer
information?
Business partners
Who is liable if the data resides in one location and processing takes place
in another location?
Who is responsible for the security and privacy of the information transmitted between an organization and a business partnerвЂ”the sender or the
receiver?
Network Baselines
Deп¬Ѓnition:
A baseline is a record of a systemвЂ™s performance statistics under normal operating conditions. A network baseline documents the networkвЂ™s current performance level and
provides a quantitative basis for identifying abnormal or unacceptable performance. It
can also reveal where bottlenecks are impeding system performance, and provide evidence for upgrading systems to improve performance.
Example: Network Baseline Implementation
For example, if a company is expanding a remote office that is connected to the corporate office with a fractional T1, the baseline can help determine if there is enough
reserve bandwidth to handle the extra user load, or if the fractional T1 needs to be
upgraded to a full T1.
The Network Baselining Process
Creating and applying a baseline is a cyclical process.
The network baselining process consists of eight steps.
Lesson 14: Network Management
489
Copyright В© Element K Corporation
LESSON 14
Figure 14-11: The process of baselining a network.
Step
Description
Step 1: Evaluate network
Decide what statistics to measure to evaluate the networkвЂ™s current performance
levels. You will evaluate a network that primarily provides п¬Ѓle access differently than you would one that hosts web servers.
Step 2: Design tests
Develop a suite of tests that reveal the networkвЂ™s performance level. Make the
tests consistent to yield scalable results, speeds, percentages, and other information. Avoid tests that do not show improvement or degradation of performance
as these may not affect the baseline.
Step 3: Schedule tests
Determine when and how frequently to run the tests. The tests should include a
sampling of different network usage levels, including peak and off-peak usages,
and should be run over a period of time to present a realistic proп¬Ѓle.
Step 4: Run tests
Run the tests on the network at the scheduled times.
Step 5: Document
results
Document test results. Record the data in a format that can be used for comparison with future tests.
Step 6: Analyze data
Analyze the data to identify bottlenecks, which are parts of the system that perform poorly as compared to other components and reduce the overall system
performance.
Step 7: Repeat tests
Repeat the tests at regular intervals or when network performance is low. If the
performance data compares unfavorably to the baseline, try to identify the cause
and troubleshoot the problem.
Step 8: Upgrade as
needed
Upgrade or reconп¬Ѓgure components on an ongoing basis to remove bottlenecks,
and repeat the tests to establish new baseline values.
Baseline Customization
The number, type, and frequency of tests performed and recorded in the baseline will
vary depending upon the systems and the needs of the organization. The organization
must also decide how often to establish a new baseline to reп¬‚ect current performance.
CompTIAВ® Network+В® (Exam N10-005)
490
Copyright В© Element K Corporation
LESSON 14
Baseline Logging
Typically, you will record baseline measurements to a log п¬Ѓle that you can review
later, rather than examining the measurements in real time. Most performance or network monitoring systems enable you to save log data. For example, in Windows
Server 2008 R2, Performance MonitorВ® gives you the option to record data directly to
log format. When you log data in Performance, you can select all counters for a
selected object, or speciп¬Ѓc counters. You can examine the counter values by selecting
the counters to add when you open the log п¬Ѓle in Chart view.
ACTIVITY 14-2
Using Performance Monitor to Establish a Baseline
This is a simulated activity that is available on the CD-ROM that shipped with this course. You can run this simulation on any Windows computer. The activity simulation can be launched either directly from the CD-ROM by
clicking the Interactives link and navigating to the appropriate one, or from the installed data п¬Ѓle location by
opening the C:\Data\Simulations\Lesson#\Activity# folder and double-clicking the executable (.exe) п¬Ѓle.
Scenario:
A part of your regular duties on your companyвЂ™s network support team is to take and record
baseline performance measurements for key systems on your network. The next system you are
scheduled to baseline is a corporate п¬Ѓle server running on Windows Server 2008 R2. This system is a dedicated п¬Ѓle server, and does not run any special services.
Lesson 14: Network Management
491
Copyright В© Element K Corporation
LESSON 14
What You Do
How You Do It
1.
a. Choose Startв†’Administrative Toolsв†’
Performance Monitor.
Create and set up the performance
log.
b. On the left pane, expand Data Collector
Sets.
c. Select the User Defined object and
choose Actionв†’Newв†’Data Collector Set.
d. In the Create new Data Collector Set.
dialog box, in the Name field, type
Baseline and click Next.
e. In the Template Data Collector Set list,
click Basic and click Next.
f.
Accept the default settings for saving data
by clicking Next and then clicking Finish.
g. In the right pane, double-click the
Baseline object.
h. Right-click Performance Counter and
choose Properties.
i.
In the Performance Counter Properties
window, on the Performance Counters
page, with the \Processor(*)\* item
selected, click Remove.
j.
Click Add to add a new performance
counter.
k. In the Available counters section, scroll
up and expand the Memory object.
l.
Click Add.
m. Click OK.
CompTIAВ® Network+В® (Exam N10-005)
492
Copyright В© Element K Corporation
LESSON 14
2.
Create the log file and set its parameters.
a. In the Performance Counter Properties
dialog box, in the Log format drop-down
list, verify that Binary is selected and in
the Sample interval text box, double click
and type 15
b. Verify that the Units drop-down list displays Seconds and select the File tab.
c. Click the button next to the File name
format text field.
d. Select yyyy Full year including century.
e. Click the button next to the File name
format text field.
f.
Select MM Numeric month with leading
zero.
g. Click the button next to the File name
format text field.
h. Select dd Day of the month with leading
zeros.
i.
Check the Prefix file with computer
name check box.
j.
Observe that in the Example file name
text box, a log file name appears that displays the criteria just selected. In the Log
mode section, check Overwrite.
k. Click Apply and then click OK.
3.
Track server activity with the log.
a. In the left navigation pane, right-click
Baseline and choose Start. Verify that a
green arrow appears over the icon, indicating that the monitor is running.
b. Run the log for 5 or 10 minutes, while you
generate system activity by opening and
closing programs, documents, and connecting to other systems on the network.
c. On the left pane, click Performance
Monitor.
d. Observe the graph that is plotted.
Lesson 14: Network Management
493
Copyright В© Element K Corporation
LESSON 14
4.
Examine the log data.
a. In the left navigation pane, expand
Reportsв†’User Defined and then click
Baseline.
b. In the right navigation pane, double-click
the object that displays todayвЂ™s date.
c. In the Application Counters row, click the
arrow on the right side to expand that
section of the report.
d. Observe that this report provides baseline
information for the counters you specified, as each counter gets a Mean,
Minimum, and Maximum score. Close the
Performance Monitor window.
TOPIC C
Network Performance Optimization
Now that you have determined your conп¬Ѓguration and baseline measurements, you may want
to make changes to the network conп¬Ѓguration or utilization to increase performance. In this
topic, you will review techniques for network performance optimization.
If all you did was to monitor the network and take baseline measurements, the data you gathered would be relatively useless. You need to use the data to tweak the performance of existing
systems and make the necessary changes to ensure that the network performs to its peak efficiency. This, in turn, provides higher availability of data and resources to your users and
optimizes the performance.
QoS
Quality of Service (QoS) is a set of parameters that controls the quality provided to different
types of network traffic. QoS parameters include the maximum amount of delay, signal loss
and noise that can be accommodated for a particular type of network traffic, bandwidth priority, and CPU usage for a speciп¬Ѓc stream of data. These parameters are agreed upon by the
transmitter and the receiver, the transmitter being the ISP and the receiver being the subscriber.
Both the transmitter and receiver enter into an agreement known as the Service Level Agreement (SLA). In addition to deп¬Ѓning QoS parameters, the SLA describes remedial measures or
penalties to be incurred by an ISP in the event that the ISP fails to provide the QoS promised
in the SLA.
CompTIAВ® Network+В® (Exam N10-005)
494
Copyright В© Element K Corporation
LESSON 14
Figure 14-12: QoS controls the quality provided to different types of network traffic.
The Need for QoS
The amount of data being transmitted over networks is rising every day. Also, the type of data
being transferred is changing. Traditional applications such as FTP and Telnet are now outnumbered by real-time multimedia applications such as IP telephony, multimedia applications,
and videoconferencing. FTP and Telnet are very sensitive to packet loss but are tolerant to
delays in data delivery. The reverse is applicable to multimedia applications; they can compensate for some amount of packet loss, but are very sensitive toward delays in data delivery.
Therefore, an optimum usage of bandwidth becomes very critical while dealing with multimedia applications. Low bandwidth may result in a bad quality transmission of real-time
applications, leading to dropouts or data loss. To avoid this, certain parameters were developed
to prioritize bandwidth allocation for real-time applications on networks, such as the Internet,
and guarantee a speciп¬Ѓc QoS.
Figure 14-13: Bandwidth is prioritized to provide better QoS.
QoS Parameters
Several parameters affect QoS on a network.
Lesson 14: Network Management
495
Copyright В© Element K Corporation
LESSON 14
Parameter
Description
Bandwidth
Network bandwidth is the average number of bits of data that can be transmitted
from a source to a destination over the network in one second.
Latency
Latency, also called lag or delay, is the time difference between transmission of a
signal and when it was received.
Some delay is inevitable; packets are held up in queues, or take less congested
routes that take longer, but excessive delay can render applications insensitive to
delay.
To account for latency on a network, technicians need to consider the applications
that will predominantly use the network, and design the network with devices that
allow for lower processing delays or provision for bandwidth expansion when
needed. Latency can be minimized by increasing the network bandwidth, fragmenting data packets, or prioritizing data on a network.
Jitter
Jitter is the variability over time in latency between sequentially transmitted data
packets.
Packets are delayed when processed in queues and routers along the transmission
route and often reach the destination at variable times. Although packets are sent
continuously with even spacing, the spacing becomes uneven because the delay
between each packet is variable due to network congestion, improper queuing, or
errors in conп¬Ѓguration. The variation in the arrival of packets pauses the conversation and garbles the speech.
A very low amount of jitter is important for real-time applications using voice and
video. Jitter is resolved using the dejitter or play-out delay buffer. This buffer
stores packets and plays them into a steady stream so that they are converted into
a proper analog stream. However, dejitter buffers increase latency on a network.
Packet loss
Packet loss is the number of packets that are lost or damaged during transmission.
Packets can be dropped when they arrive at a destination that has buffers that are
already full. To minimize packet loss, the receiving application asks for a retransmission of packets. Unfortunately, this can add to latency.
Echo
Echo is a reп¬‚ected sound, a distinct repetition of the original soundвЂ”a familiar
phenomenon in phone calls when you hear your own voice after a few milliseconds (ms).
Echoes can occur during many locations along the route. Splices and improper
terminations in the network can cause a transmission packet to reп¬‚ect back to the
source, which causes the sound of an echo. To correct for echo, network technicians can introduce an echo canceller to the network design. This will cancel out
the energy being reп¬‚ected.
Latency Sensitivity
Some applications, protocols, and processes are sensitive to the time it takes for their
requests and results to be transmitted over the network. This is known as latency sensitivity. Examples of latency sensitive applications include VoIP, video conferencing, and
other real-time applications. In a VoIP, high latency can result in an annoying and
counterproductive delay between a speakerвЂ™s words and the listenerвЂ™s reception of
those words.
Network management techniques such as QoS, load balancing, traffД±c shaping, and
caching can be used to optimize the network and reduce latency for sensitive applications. By regularly testing for latency and monitoring those devices that are susceptible
to latency issues, you can provide a higher level of service to users.
CompTIAВ® Network+В® (Exam N10-005)
496
Copyright В© Element K Corporation
LESSON 14
Traffic Shaping
TraffД±c shaping, also known as bandwidth shaping is a mechanism in QoS for introducing
some amount of delay in traffic that exceeds an administratively deп¬Ѓned rate. Traffic shaping
smooths down traffic bursts that occur when the transmitter sends packets at a rate higher than
the capacity of the receiver. During such times, packets are stored in a buffer and released after
a speciп¬Ѓc time interval. Traffic shaping is implemented on edge devices, before packets enter
the core network. Traffic shaping does not drop packets and is implemented only on the outbound interface of a device, whereas traffic policing can be implemented on both outbound and
inbound interfaces.
Traffic Policing
TraffД±c policing is the method of governing and regulating a п¬‚ow of packets in conformity with the standards and limits speciп¬Ѓed in the SLA. Packets not conforming to the
SLA are either dropped or marked to a lower precedence value.
Load Balancing
Another network performance optimization method is load balancing. Load balancing is a
method of dividing work among the devices on a network. By sharing the work, more
resources are available and data is processed faster. By balancing the workload between
devices, all devices in the network perform at their optimum efficiency. Often, a dedicated program or hardware device is used to balance the load on different devices. Clustering servers is
also another way to create load balancing. In a cluster, a main server is used to determine
which server in the cluster will provide the data processing capability. Load balancers are
stand-alone network devices that perform load balancing as their primary function.
Figure 14-14: Load balancing spreads out work among devices in a network.
Lesson 14: Network Management
497
Copyright В© Element K Corporation
LESSON 14
High Availability
High availability is a rating that expresses how closely systems approach the goal of providing
data availability 100 percent of the time while maintaining a high-level of system performance.
High availability systems are usually rated as a percentage that shows the proportion of uptime
to total time.
Figure 14-15: A storage system providing high availability for users.
Availability Rating
вЂњFive ninesвЂќ and other availability rating п¬Ѓgures are determined through a series of
industry-standard calculations that take into account a variety of factors, such as the
amount of time between failures and the time required to restore the system.
Caching Engines
Deп¬Ѓnition:
A caching engine is an application or a service that stores, or indexes data in order to
provide faster responses to requests for that data. Rather than having to run a database
query or send a request to a web server every time data is needed, caching engines
retrieve the data and store it until it is requested. The engine uses various parameters
to determine when it should update the cached data, and is usually conп¬Ѓgured to
deliver the most up-to-date information available. Caching engines are useful for
responding to requests for frequently-used data. The presence of a caching engine is
usually hidden to both the requester and originator of data.
CompTIAВ® Network+В® (Exam N10-005)
498
Copyright В© Element K Corporation
LESSON 14
Example:
Figure 14-16: A caching engine indexes data.
High-Bandwidth Applications
A high-bandwidth application is a software application or program that requires large amounts
of network bandwidth for data transmission. With these high-intensity, high-bandwidth applications, bandwidth issues will become more frequent, resulting in degradation of QoS on a
network. High-bandwidth applications can be managed by ensuring a certain amount of bandwidth availability for them. High-bandwidth applications can include:
вЂў
VoIP
вЂў
HDTV
вЂў
Real-time video
вЂў
And, multimedia
Figure 14-17: A high-bandwidth application consumes large amounts of network
bandwidth.
Factors Affecting a QoS Implementation
Proper QoS mechanisms ensure that a network performs at the desired level and delivers predictable results to its users. There are various factors that affect the QoS implementation on a
network.
Lesson 14: Network Management
499
Copyright В© Element K Corporation
LESSON 14
Factor
Description
Packet classiп¬Ѓcation
Each packet coming to a router is classiп¬Ѓed based on its QoS requirements.
This classiп¬Ѓcation enables the router to process the packet based on its
resource requirement. For example, a packet classiп¬Ѓed as FTP will need
less bandwidth than a packet classiп¬Ѓed as IP telephony.
Policing
An application requests the required amount of network resources, and it
must always adhere to this request. An application must not send packets at
a rate more than what was requested. In order to make sure the application
is adhering to the parameters, policing of packets is implemented at the
routers end.
Resource allocation
A network may receive both data and voice packets simultaneously. It is
the network deviceвЂ™s responsibility to appropriately allocate resources to
both these types of data.
Call admission
Once a network receives a QoS request, it veriп¬Ѓes the available network
resources to see if it can provide the required quality. In case of unavailability of network resources, the network can deny the request.
ACTIVITY 14-3
Identifying Network Performance Optimization
Techniques
Scenario:
In this activity, you will identify network performance optimization techniques.
1.
Which QoS parameter represents inconsistency in packet delivery?
a) Bandwidth
b) Latency
c) Jitter
d) Packet loss
2.
Match the network performance optimization method with its function.
Traffic shaping
Load balancing
Caching engine
a. Spreading out work among devices.
b. Controlling the п¬‚ow of packets over a
network.
c. Indexing data to provide faster
responses to requests.
CompTIAВ® Network+В® (Exam N10-005)
500
Copyright В© Element K Corporation
LESSON 14
3.
Which are examples of latency sensitive applications?
a) VoIP
b) Video conferencing
c) Online gaming
d) Email
4.
Which statements are true of QoS?
a) A set of parameters that controls the quality provided to different types of wireless
network traffic.
b) QoS parameters are agreed upon by the transmitter and the receiver, the receiver
being the ISP and the transmitter being the subscriber.
c) QoS parameters include the maximum delay, signal loss, and noise that can be
accommodated for a type of network traffic, bandwidth priority, and CPU usage for a
specific stream of data.
d) The transmitter and receiver enter into a Service Level Agreement to ensure QoS.
Lesson 14 Follow-up
In this lesson, you identiп¬Ѓed a number of system monitoring tools that will help to determine
your networkвЂ™s baseline and optimize its performance. This will help you monitor your network and ensure that there is low downtime and critical services are available to meet the
needs of the users of your network.
1.
What network optimization tools, methods, or techniques do you think will be most
important to you as you manage your organizationвЂ™s network for optimal performance?
2.
What network monitoring activities are you likely to perform in your organization?
Lesson 14: Network Management
501
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
502
Copyright В© Element K Corporation
LESSON 15
LESSON 15
Lesson Time
2 hour(s), 15 minutes
Network Troubleshooting
In this lesson, you will describe troubleshooting of issues on a network.
You will:
вЂў
List the components of a troubleshooting model.
вЂў
Describe various utilities for troubleshooting networks.
вЂў
Describe major hardware troubleshooting tools.
вЂў
Identify the causes and solutions of common network connectivity issues.
Lesson 15: Network Troubleshooting
503
Copyright В© Element K Corporation
LESSON 15
Introduction
So far in this course, you have learned about all the different components, theories, technologies, and tasks that a network administrator will draw upon to perform job functions. One of
the most important of those functions, which requires knowledge about all aspects of the network, is network troubleshooting. In this lesson, you will identify major issues, models, tools,
and techniques in network troubleshooting.
Network problems can arise from a variety of sources outside your control. As a network professional, your users, your managers, and your colleagues will all look to you to identify and
resolve those problems efficiently. To do that, you will need a strong fundamental understanding of the tools and processes involved in troubleshooting a network.
This lesson covers all or part of the following CompTIAВ® Network+В® (Exam N10-005) certiп¬Ѓcation objectives:
вЂў
Topic A:
вЂ”
вЂў
вЂў
вЂў
1.8 Given a scenario, implement the following network troubleshooting methodology.
Topic B:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
1.4 Explain the purpose and properties of routing and switching.
вЂ”
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
вЂ”
4.3 Given a scenario, use appropriate software tools to troubleshoot connectivity
issues.
Topic C:
вЂ”
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
вЂ”
3.1 Categorize standard media types and associated properties.
вЂ”
3.8 Identify components of wiring distribution.
вЂ”
4.2 Given a scenario, use appropriate hardware tools to troubleshoot connectivity
issues.
вЂ”
4.4 Given a scenario, use the appropriate network monitoring resource to analyze
traffic.
Topic D:
вЂ”
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
вЂ”
2.4 Given a scenario, troubleshoot common wireless problems.
вЂ”
2.5 Given a scenario, troubleshoot common router and switch problems.
вЂ”
3.6 Given a scenario, troubleshoot common physical connectivity problems.
CompTIAВ® Network+В® (Exam N10-005)
504
Copyright В© Element K Corporation
LESSON 15
TOPIC A
Network Troubleshooting Models
You have learned about monitoring and implementing fault tolerance on a network. Despite
these measures, unforeseen issues do arise on a network that requires you, as a network professional, to identify and troubleshoot issues. The п¬Ѓrst step in troubleshooting your network is to
select a troubleshooting model. In this topic, you will list the components of a network
troubleshooting model.
Because troubleshooting network problems is such a big part of a network administratorвЂ™s or
network professionalвЂ™s job, you should always use a systematic approach to problem-solving.
Troubleshooting models provide you with processes on which to base your troubleshooting
techniques. Learning and using a troubleshooting model can help you resolve problems speedily and effectively.
Troubleshooting
Troubleshooting is the recognition, diagnosis, and resolution of problems. Troubleshooting
begins with the identiп¬Ѓcation of a problem, and does not end until services have been restored
and the problem no longer adversely affects users. Troubleshooting can take many forms, but
all approaches have the same goal: solving a problem efficiently with a minimal interruption of
service.
Figure 15-1: Steps in the troubleshooting process.
Troubleshooting Models
Deп¬Ѓnition:
A troubleshooting model is a standardized step-by-step approach to the troubleshooting
process. The model serves as a framework for correcting a problem on a network without introducing further problems or making unnecessary modiп¬Ѓcations to the network.
Models can vary in the sequence, number and name of the steps involved, but all models have the same goal: to move in a methodical and repeatable manner through the
troubleshooting process.
Lesson 15: Network Troubleshooting
505
Copyright В© Element K Corporation
LESSON 15
Example:
Figure 15-2: Resolution of user issues using the troubleshooting model.
The Network+ Troubleshooting Model
There are seven steps in the CompTIA Network+ troubleshooting model.
Figure 15-3: Steps in the CompTIA troubleshooting model.
Troubleshooting Documentation
Some of the things you might want to include in a troubleshooting documentation template are:
вЂў
A description of the initial trouble call, including date, time, who is experiencing
the problem, and who is reporting the problem.
вЂў
A description of the conditions surrounding the problem, including the type of
computer, the type of NIC, any peripherals, the desktop operating system and version, the network operating system and version, the version of any applications
mentioned in the problem report, and whether or not the user was logged on when
the problem occurred.
вЂў
Whether or not you could reproduce the problem consistently.
вЂў
The exact issue you identiп¬Ѓed.
вЂў
The possible cause or causes you isolated.
вЂў
The correction or corrections you formulated.
CompTIAВ® Network+В® (Exam N10-005)
506
Copyright В© Element K Corporation
LESSON 15
вЂў
The results of implementing each correction you tried.
вЂў
The results of testing the solution.
вЂў
Any external resources you used, such as vendor documentation, addresses for
vendor and other support websites, names and phone numbers for support personnel, and names and phone numbers for third-party service providers.
ACTIVITY 15-1
Discussing Troubleshooting Models
Scenario:
In this activity, you will discuss elements of the Network+ troubleshooting model.
1.
Users on the third floor cannot connect to the Internet, but they can log on to the
local network. What should you check first?
a) Router configuration tables.
b) If viruses exist.
c) If users on other floors are having similar problems.
d) If the power cable to the switch is connected.
2.
You reinstall the operating system for a user who is having problems. Later, the user
complains that she cannot find her familiar desktop shortcuts. What step of the
troubleshooting model did you omit?
a) Documenting findings, actions and outcomes.
b) Verifying full system functionality and implementing preventative measures.
c) Testing the theory to determine cause.
d) Establishing a plan of action to resolve the problem.
3.
Which techniques will help you establish a theory of probable cause of the problem?
a) Ask the user open-ended questions about the problem.
b) Try to replicate the problem on a nearby workstation.
c) Make a list of problems that can all cause the same symptoms.
d) Find out if users in other parts of the building are facing the same problem.
4.
A user calls to say that his computer will not boot. He mentions that everything was
fine until a brief power outage on his floor. What stage of the troubleshooting model
can this information help you with most directly?
a) Establishing a theory of probable cause.
b) Establishing a plan of action to resolve the problem.
c) Documenting findings, actions and outcomes.
d) Identify the problem.
Lesson 15: Network Troubleshooting
507
Copyright В© Element K Corporation
LESSON 15
5.
A user calls the help desk and says he is unable to open a file. You are not able to visit
the userвЂ™s workstation because he is in a different location. What are the first steps
you need to take to diagnose the problem?
6.
What are some of the questions you should ask?
7.
Through your diagnostic questions, you establish that the file is a word-processing
document stored on a network file server. The user last accessed the file three months
ago. By reviewing the activity logs on the file server, you find that there is a
bi-monthly cleanup routine that automatically backs up and removes user data files
that have not been accessed since the last cleanup date. The backups are stored in an
offsite facility for one year. Given this information, what is your action plan, how will
you implement it, and what potential side effects of the plan do you need to consider?
8.
What steps should you take to test, verify, and document the solution?
CompTIAВ® Network+В® (Exam N10-005)
508
Copyright В© Element K Corporation
LESSON 15
TOPIC B
Network Troubleshooting Utilities
In the previous topic, you learned how to apply a structured troubleshooting model. To implement your model, you will utilize various troubleshooting utilities. In this topic, you will
identify the functions of network troubleshooting utilities.
It does not pay to try to drive in a nail with a screwdriver or loosen a bolt with a hammer.
Knowing the right tool for the job is an important part of correcting any problem. As a networking professional, you will need to be familiar with the uses of several tools. With TCP/IP
being the most commonly implemented network protocol today, the TCP/IP utility suite will
often be the п¬Ѓrst place you will turn to start п¬Ѓguring out a network communication problem
and п¬Ѓxing it.
Troubleshooting with IP Conп¬Ѓguration Utilities
With TCP/IP networking problems, a common п¬Ѓrst step is to verify that the hostвЂ™s IP addressing information is correct. Use ipconfig or ifconfig, as appropriate, to determine if the
host is conп¬Ѓgured for static or dynamic IP addressing and if it has a valid IP address. If the
host is getting an incorrect dynamic IP address and you believe there is a valid DHCP server,
you can use the utility to release and renew the address.
Figure 15-4: The ipconfig utility.
The ping Utility
Use the ping utility as an initial step in diagnosing general connectivity problems. The steps
can include:
вЂў
Ping the loopback address (127.0.0.1) to test whether TCP/IP has initialized on an individual system.
вЂў
Ping a speciп¬Ѓc system to verify that it is running and is connected to the network.
вЂў
Ping by IP address instead of host name to determine if it is a problem related to name
resolution.
вЂў
Localize the problem:
вЂ”
Ping the local loopback address.
вЂ”
Ping the systemвЂ™s own IP address.
вЂ”
Ping the address of the default gateway.
Lesson 15: Network Troubleshooting
509
Copyright В© Element K Corporation
LESSON 15
вЂ”
And, ping the address of a remote host.
Figure 15-5: Successful and unsuccessful responses using the ping utility.
ping Responses
When you ping a computer, it will respond with one of the following responses:
вЂў
Normal response: The computer responds normally with requested data for different parameters.
вЂў
Destination unreachable: The target computer was identiп¬Ѓed but was not reachable by the default gateway.
вЂў
Unknown host: The target computer is unknown and is not reachable.
вЂў
Destination does not respond: There was no response to the ping.
вЂў
Network or host unreachable: The routing table does not contain an entry for
the network or host.
The traceroute Utility
If you cannot connect to a particular remote host, you can use traceroute to determine
where the communication fails. Issue a traceroute command from the local machine to see
how far the trace gets before you receive an error message. Using the IP address of the last
successful connection, you will know where to begin troubleshooting the problem, and potentially even pinpoint a speciп¬Ѓc failed device. UNIX and Linux systems use the traceroute
command, while on Windows, the tracert utility provides similar functionality.
CompTIAВ® Network+В® (Exam N10-005)
510
Copyright В© Element K Corporation
LESSON 15
Figure 15-6: tracert output of ourglobalcompany.com
The arp Utility
The arp utility supports the ARP service of the TCP/IP protocol suite. It enables an administrator to view the ARP cache and add or delete cache entries. It is also used to locate a nodeвЂ™s
hardware address. Any added entry becomes permanent until it is deleted or the machine is
shut down.
arp can be used both to help troubleshoot duplicate IP address problems and to diagnose why
a workstation cannot connect to a speciп¬Ѓc host. If a host is reachable from one workstation but
not from another, you can use the arp command on both workstations to display the current
entries in the ARP table. If the MAC address on the problem workstation does not match the
correct MAC address, you can use arp to delete the incorrect entry. On both UNIX and Windows systems, the arp -a command will return a tabular listing of all ARP entries in the
nodeвЂ™s ARP cache.
Figure 15-7: The ARP cache entries.
arp Options
There are several options available for use with arp. They follow the syntax: arp
[option]
Lesson 15: Network Troubleshooting
511
Copyright В© Element K Corporation
LESSON 15
Option
Description
inet_addr
Used with other options to specify an Internet address.
eth_addr
Used with other options to specify a physical address.
if_addr
Used with other options to specify the Internet address of the interface
whose ARP table should be modiп¬Ѓed.
-a
Displays the current ARP entries in the cache. Can add inet_addr
to specify a particular IP address.
-g
Displays the same information as the -a option.
-N if_addr
Displays the ARP entries for the network interface speciп¬Ѓed by
if_addr.
-d
Deletes a single host entry if followed by if_addr. Deletes all host
entries if followed by *.
-s inet_addr
eth_addr
Add a host. The Internet address is set by adding an inet_addr
value and the physical address is set by adding an eth_addr value.
arp and ping commands
arp can be used in conjunction with ping to troubleshoot more complex network
problems. If you ping a host on the network and there is no reply, the host may not
necessarily be unavailable. The increased use of п¬Ѓrewalls today can prevent a ping
from returning accurate information. Instead, you can use the arp command to п¬Ѓnd
the host by the MAC address and bypass the IP address resolution.
ARP Cache
The ARP cache is a table used for maintaining the correlation between each MAC
address and its corresponding IP address. To reduce the number of address resolution
requests, a client normally has all addresses resolved in the cache for a short period of
time. The ARP cache is of a п¬Ѓnite size; if no limit is speciп¬Ѓed, all incomplete and
obsolete entries of unused computers will accumulate in the cache. The ARP cache is,
therefore, periodically п¬‚ushed of all entries to free up memory.
The NBTSTAT Utility
NBTSTAT is a Windows utility that is used to view and manage NetBIOS over TCP/IP
(NetBT) status information. It can display NetBIOS name tables for both the local computer
and remote computers, and also the NetBIOS name cache. The table names enable you to
verify the connection establishment. With NBTSTAT, you can refresh the NetBIOS name cache
as well as the names registered with the WINS server.
NBTSTAT can be very helpful in identifying problems that are speciп¬Ѓc to Windows computers
that use NetBIOS naming. NBTSTAT was developed speciп¬Ѓcally as a NetBIOS diagnostic tool,
and it displays NetBIOS information that is not available with other TCP/IP utilities.
CompTIAВ® Network+В® (Exam N10-005)
512
Copyright В© Element K Corporation
LESSON 15
Figure 15-8: Output of the NBTSTAT utility.
NBTSTAT Options
There are several case-sensitive options you can use with the NBTSTAT command.
They follow the syntax: NBTSTAT [option]
Option
Description
-a
[RemoteName]
Displays the NetBIOS name table of the remote computer speciп¬Ѓed by
the name.
-A [IPAddress]
Displays the NetBIOS name table of the remote computer speciп¬Ѓed by
the IP address.
-c
Displays the NetBIOS name cache of the local computer.
-n
Lists the local NetBIOS name table along with the service code, type,
and status.
-r
Lists NetBIOS names resolved by broadcast and via WINS.
-R
Purges the cache and reloads static entries from the LMHOSTS п¬Ѓle.
-S
Lists NetBIOS connections and their state with destination IP addresses.
-s
Lists NetBIOS connections and their state, converting destination IP
addresses to computer NetBIOS names.
-RR
Sends name release packets to the WINS server and then starts refresh.
The NETSTAT Utility
The NETSTAT utility shows the status of each active network connection. NETSTAT will display statistics for both TCP and UDP, including protocol, local address, foreign address, and
the TCP connection state. Because UDP is connectionless, no connection information will be
shown for UDP packets.
Lesson 15: Network Troubleshooting
513
Copyright В© Element K Corporation
LESSON 15
Figure 15-9: Output of the NETSTAT utility.
NETSTAT is a versatile troubleshooting tool that can serve several functions. You can:
вЂў
Use NETSTAT to п¬Ѓnd out if a TCP/IP-based program, such as SMTP or FTP, is listening
on the expected port. If not, the system might need to be restarted.
вЂў
Check statistics to see if the connection is good. If there is a bad connection, this usually
means there are no bytes in the send or receive queues.
вЂў
Use statistics to check network adapter error counts. If the error count is high, it could be
a problem with the card, or could indicate generally high network traffic.
вЂў
Use NETSTAT to display routing tables and check for network routing problems.
NETSTAT Options
There are several options available to use with the NETSTAT command.
Option
Displays
-a
All connections and listening ports.
-e
Ethernet statistics.
-n
Addresses and port numbers in numerical form.
-o
The process ID associated with each connection.
-p [protocol]
Connections for the protocol speciп¬Ѓed in place of [protocol]
in the command syntax. The value of the [protocol] variable
may be TCP, UDP, TCPv6, or UDPv6.
-r
The routing table.
-s
Statistics grouped by protocolвЂ”IP, IPv6, ICMP, ICMPv6, TCP,
TCPv6, UDP, and UDPv6.
[interval]
Refreshes and redisplays the statistics speciп¬Ѓed in the command at
the stated number of seconds speciп¬Ѓed in place of [interval]
in the code syntax. Ctrl+C stops the command from refreshing.
CompTIAВ® Network+В® (Exam N10-005)
514
Copyright В© Element K Corporation
LESSON 15
Socket States
NETSTAT will display one of several states for each socket.
A SYN packet contains information regarding the return path for the data.
Socket State
Description
SYN_SEND
Connection is active and open.
SYN_RECEIVED
The server just received the synchronize п¬‚ag set (SYN) from
the client.
ESTABLISHED
The client received the serverвЂ™s SYN and the session is established.
LISTEN
The server is ready to accept a connection.
FIN_WAIT_1
The connection is active, but closed.
TIMED_WAIT
The client enters this state after FIN_WAIT_1.
CLOSE_WAIT
Passive close. The server just received FIN_WAIT_1 from a
client.
FIN_WAIT_2
The client just received an acknowledgement of its
FIN_WAIT_1 from the server.
LAST_ACK
The server is in this state when it sends its own FIN.
CLOSED
The server received an acknowledgement (ACK) from the client
and the connection is closed.
The Nslookup Utility
The nslookup utility is used to test and troubleshoot domain name servers. Nslookup has two
modes: the interactive mode enables you to query name servers for information about hosts
and domains, or to print a list of hosts in a domain. The non-interactive mode prints only the
name and requested details for one host or domain. The non-interactive mode is useful for a
single query.
Figure 15-10: Output of the nslookup utility.
You can use nslookup to display information about DNS servers. You can verify that:
вЂў
The system is conп¬Ѓgured with the correct DNS server.
вЂў
The server is responding to requests.
вЂў
The entries on the server are correct.
Lesson 15: Network Troubleshooting
515
Copyright В© Element K Corporation
LESSON 15
вЂў
And, the DNS server can communicate with other servers in the DNS hierarchy to resolve
names.
nslookup Support
nslookup is available on UNIX, and on all Windows systems except for older versions of Windows namely Windows 9x and Windows ME.
nslookup Syntax
The syntax for the nslookup command is nslookup [-option ...]
[computer-to-find | - [server]].
To enter the interactive mode of nslookup, type nslookup without any arguments
at a command prompt, or use only a hyphen as the п¬Ѓrst argument and specify a
domain name server in the second. The default DNS name server will be used if you
do not enter anything for the second argument.
To use the non-interactive mode, in the п¬Ѓrst argument, enter the name or IP address of
the computer you want to look up. In the second argument, enter the name or IP
address of a domain name server. The default DNS name server will be used if you do
not enter anything for the second argument.
DIG Utility
Domain Internet Groper (DIG) is a UNIX/Linux command-line tool that can be used to
display name server information. Some experts consider it to be generally easier to use
than nslookup, and that it supports more п¬‚exible queries and is easier to include in
command scripts. It is included with the BIND version of DNS, and can be downloaded from many UNIX and Linux resource sites on the Internet.
SNIPS
System and Network Integrated Polling Software (SNIPS) is a system and network monitoring
software tool that runs on UNIX systems. It offers both a command-line and web interfaces to
monitor network and system devices. The monitoring functions of SNIPS determine and report
the status of services running on the network. Reports can be viewed in real time by the systems administrator through a terminal or web interface. Alarms created by SNIPS can be set to
set off an alarm or to simply log the event based on monitoring levels the administrator can
conп¬Ѓgure. The four monitoring levels supported by SNIPS are: info, warning, error, and critical.
Network Operations Center Online, or nocol, was NetplexвЂ™s network monitoring tool that supports both a CLI and
Web interface and was the predecessor of SNIPS.
CompTIAВ® Network+В® (Exam N10-005)
516
Copyright В© Element K Corporation
LESSON 15
ACTIVITY 15-2
Using the Network Troubleshooting Utilities
Scenario:
In this activity, you will use various network troubleshooting utilities.
What You Do
How You Do It
1.
a. Choose Startв†’Command Prompt to display the Command Prompt window.
Use the NETSTAT command to identify the connections that are active
on your system.
b. In the Command Prompt window, enter
NETSTAT -a to identify the active connections.
c. Observe the UDP connections that are
listed in the output.
d. If necessary, enter cls to clear the
screen.
2.
Use the NBTSTAT command to see
the names in your NetBIOS name
cache.
a. In the Command Prompt window, enter
NBTSTAT -c -n to view your NetBIOS
name cache.
b. Observe the name cache entries that are
displayed in the output.
c. If necessary, clear the screen.
3.
Use the nslookup command to
obtain the host name of the DNS
server.
a. In the Command Prompt window, enter
nslookup to open the nslookup interactive mode.
b. Enter set querytype=ptr to change
the query type to pointer.
c. Enter 192.168.1.##, where ## will be the
IP address of your local system.
d. Observe the results of the output. Enter
exit to quit nslookup.
e. If necessary, clear the screen.
Lesson 15: Network Troubleshooting
517
Copyright В© Element K Corporation
LESSON 15
4.
Use the arp command to view the
entries in your systemвЂ™s ARP cache.
a. In the Command Prompt window, enter
arp /? to view the syntax of the arp
command.
b. In the Command Prompt window, enter
arp -a | more to view the first page of
the entries in your systemвЂ™s ARP cache.
c. Press the Spacebar to view the next page
of the entries in your systemвЂ™s ARP cache.
d. Observe the entries displayed in the output. Enter exit to close the Command
Prompt window.
ACTIVITY 15-3
Troubleshooting Network Problems
Scenario:
You are a network administrator for OGC Financial, a medium-sized п¬Ѓnancial company. An
employee has contacted you, saying that she is unable to connect to the Internet. After checking the physical cables and verifying that everything is working correctly, you run
ipconfig, and discover that the computer has been leased an IP address of 192.168.0.200.
Your company uses private IP addresses that begin with 172, and so you need to start troubleshooting the problem.
1.
Which of the these would be the best first step?
a) Reboot the computer.
b) Load a new browser.
c) Drop the IP address and lease a new address.
d) Drop the IP address and assign a static address.
2.
If you lease a new IP address and it is also in the 192.168 scope, then, based on the
evidence, what seems to be the problem so far?
a) The employeeвЂ™s computer is functioning as a DHCP server.
b) There is another DHCP server on the network leasing addresses.
c) The computer is looking at the incorrect network interface.
d) The loopback adapter is not working.
CompTIAВ® Network+В® (Exam N10-005)
518
Copyright В© Element K Corporation
LESSON 15
3.
After the user in the next cubicle reports the same problem, based on the diagnostic
methodology, you discover that an administrator in a nearby conference room has set
up a wireless router so that visiting clients can access the Internet during a meeting.
Based on this information, what is the most likely reason for the IP addressing problem?
4.
In order to correct the problem, you have to physically connect a computer to the
wireless router and log in as an administrator. What kind of cable would be best to
connect the wireless router to a laptop in order to access the admin features?
a) Crossover
b) Coaxial
c) Category 5
d) Category 3
ACTIVITY 15-4
Discussing Network Troubleshooting Utilities
Scenario:
In this activity, you will discuss the network troubleshooting utilities you might use for different network problem scenarios.
1.
You have installed a Linux system in your test lab so that application developers can
test new software. Because the lab is isolated from the main network, there is no
DHCP service running. A software engineer has loaded a network application on the
system, but cannot connect to it from a client. She has already tried to ping the Linux
system by name and IP address. What should you check next and why?
2.
A user is having trouble connecting to your companyвЂ™s intranet site
(internal.everythingforcoffee.com), which is on your companyвЂ™s private network inside
your firewall. She is not having general Internet connectivity problems. What is the
best first step to take to try to narrow down the possible problem?
Lesson 15: Network Troubleshooting
519
Copyright В© Element K Corporation
LESSON 15
3.
You can connect to the intranet site with no difficulty. You check your IP configuration
against the userвЂ™s and find that you are configured with different DNS server
addresses. You do not have DNS administrative utilities installed on your workstation.
What can you do to diagnose the DNS problem?
4.
You had to stop and start the DHCP server service earlier in the day. A Windows user
calls to say that she has no network connectivity at all. What can you do to correct the
problem?
5.
You provide consulting services for a small non-profit agency that is using Windows 7
systems configured in a workgroup. To optimize performance on the older systems,
you have disabled unnecessary services on some of the machines. A user has just
installed a printer and wants to share it so that his system can function as a print
server for the rest of the workgroup. He is unable to share the printer. What can you
do to help?
6.
Your test environment includes a number of different clients, including Windows systems, Linux systems, and Mac OS X clients. You would like to be able to examine the
network performance of each system while you run a batch file to generate network
load. What utility can you use?
7.
You are experiencing a number of dropped packets and slow response time on your
routed private network. You suspect there may be a routing loop and you would like to
look more closely at packet transmissions through the network. How can you examine
the path of the transmissions?
8.
Servers on your internal network are manually configured with IP addresses in the
range 192.168.20.200 through 192.168.20.225. You are trying to open an FTP session
with the FTP server that is located on your internal network at 192.168.20.218.
Although you can ping the system by IP address, sometimes you can connect over FTP
and sometimes you cannot. You suspect there may be two hosts configured with duplicate addresses. How can you verify which physical host system is using the FTP
serverвЂ™s address?
CompTIAВ® Network+В® (Exam N10-005)
520
Copyright В© Element K Corporation
LESSON 15
TOPIC C
Hardware Troubleshooting Tools
In the previous topic, you identiп¬Ѓed the functions of TCP/IP troubleshooting utilities. Another
common category of troubleshooting utilities is hardware troubleshooting tools. In this topic,
you will identify the functions of various hardware troubleshooting tools.
As a network technician, you might not pick up a screwdriver or a pair of pliers as often as a
cable installer or an electrician does, but there are still cases where hardware and hand tools
come in handy. You should know which hardware tools you will need to use in your job, and
when and how to use them.
Network TechnicianвЂ™s Hand Tools
In the computer industry, a good toolbox includes these basic hand tools:
вЂў
A variety of screwdrivers and spare screws.
вЂў
Long-nose pliers.
вЂў
Small diagonal cutting pliers.
вЂў
A small adjustable wrench.
вЂў
A variety of wrenches or nut drivers.
вЂў
A small AA or AAA п¬‚ashlight.
вЂў
An anti-static wrist strap with clip.
Figure 15-11: Common network technicianвЂ™s hand tools.
Wrench and Screwdriver Types
Depending on the equipment in your organization, your toolbox should have a variety
of wrenches and screwdrivers. You should include #1, #2, and #3 Philips screwdrivers;
1/4вЂі and 3/16вЂі п¬‚at blade screwdrivers; and T-15 and T-20 Torx screwdrivers, as well as
any specialty security screwdrivers you need for your equipment. You should also
include 3/16вЂі, 1/4вЂі, and 5/16вЂі wrenches or nut drivers.
Lesson 15: Network Troubleshooting
521
Copyright В© Element K Corporation
LESSON 15
Security Screwdriver Sets
Many companies prefer to assemble their computers with security screws, which commonly require a specialty screwdriver not available at every hardware store. You can
п¬Ѓnd this type of screwdriver at specialty tool stores and electronics suppliers. There are
a few different types of security screws on the marketвЂ”some have a slip collar on the
outside to prevent unscrewing with anything like a wrench or pliers, and others simply
have a post in the middle of a Torx or Allen socket-head screw that prevents a standard tool from being used.
Many technicians like to buy a complete screwdriver set with multiple bits, including
those for the security screws. Some manufacturers even have tool sets that include all
of the parts for their equipment.
Electrical Safety Rules
Only a professional electrician should install, test, and maintain electric power equipment. Network technicians can safely install and test low-power communication circuits in network
cabling. When you work with electrical power, you need to follow certain basic safety rules:
вЂў
Always disconnect or unplug electrical equipment before opening or servicing it.
вЂў
Work with a partner.
вЂў
Never bypass fuses or circuit breakers.
вЂў
Use anti-static mats and wristbands to protect yourself and equipment from static discharge.
вЂў
Perform only the work for which you have sufficient training.
вЂў
Do not attempt repair work when you are tired; you may make careless mistakes, and
your primary diagnostic tool, deductive reasoning, will not be operating at full capacity.
вЂў
Do not assume anything without checking it out for yourself.
вЂў
Do not wear jewelry or other articles that could accidentally contact circuitry and conduct
current.
вЂў
Wear rubber-soled shoes to insulate yourself from ground.
вЂў
Suspend work during an electrical storm.
вЂў
Do not handle electrical equipment when your hands or feet are wet or when you are
standing on a wet surface. Perform tests with the power supply turned off.
вЂў
Prevent static electricity from damaging components by standing on a totally insulated
rubber mat to increase the resistance of the path to ground. In some cases, workstations
are located in areas with grounded п¬‚oors and workbenches, so static electricity has a lowresistance, non-destructive path to ground.
вЂў
Power supplies have a high voltage in them any time the computer is plugged in, even if
the computer power is turned off. Before you start working inside the computer case, disconnect the power cord and press the power button to dissipate any remaining power in
the system circuitry. Leave the power off until you are done servicing the system unit.
CompTIAВ® Network+В® (Exam N10-005)
522
Copyright В© Element K Corporation
LESSON 15
Wire Crimpers
Deп¬Ѓnition:
A wire crimper is a tool that attaches media connectors to the ends of cables. You can
use it if you need to make your own network cables or trim the end of a cable. There
are different crimpers for different types of connectors, so select the one that is appropriate for the type of network media you are working with. A cable stripper is often
part of a wire crimper, allowing the user to strip wires of their protective coating, and
then use the crimping tool to attach a media connector.
Example:
Figure 15-12: A wire crimper.
Punch Down Blocks
A punch down block can be used to connect one group of telephone and network wires with
another group in utility or telecommunication closets. They typically support low-bandwidth
Ethernet and Token Ring networks.
There are two primary types of punch down blocks.
Type
Description
66 Block
Used in the telephone industry for decades to terminate telecommunications. Supports
low-bandwidth telecommunications transmission.
110 Block
Punch down block or cable termination block used for structured wiring systems. Using
the 110 block system, multipair station cables are terminated, allowing cross-connection
to other punch down locations. Supports higher-bandwidth than 66 block and is suitable
for use in data applications.
110 block (T568A, T568B) supports both T568A and T568B wiring schemes.
Punch Down Tools
Deп¬Ѓnition:
A punch down tool is used in a wiring closet to connect cable wires directly to a patch
panel. The tool strips the insulation from the end of the wire and embeds the wire into
the connection at the back of the panel.
The technical name for a punch down tool is an Insulation Displacement Connector (IDC).
Lesson 15: Network Troubleshooting
523
Copyright В© Element K Corporation
LESSON 15
Example:
Figure 15-13: A punch down tool.
Purpose of a Punch Down Tool
The punch down tool makes connecting wires to a patch panel easier than it would be
to connect them by hand. Without the punch down tool, you would have to strip the
wire manually and connect it by twisting it or tightening it around a connection pole or
screw.
Circuit Testers
Deп¬Ѓnition:
A circuit tester is an electrical instrument that is used for testing whether or not current is passing through the circuit. This is normally used when there is a problem in
testing electricity п¬‚ows through two points. Plug the circuit tester into the socket and it
will display a pattern of lights depicting the status of wiring of a circuit, which will
help identify whether or not power is passing through the points.
Example:
Figure 15-14: A circuit tester.
Multimeters
Deп¬Ѓnition:
A multimeter, also known as a volt/ohm meter, is an electronic measuring instrument
that takes electrical measurements such as voltage, current, and resistance. A
multimeter can be a handheld device for п¬Ѓeld service work or a bench-top model for
in-house troubleshooting. Multimeters can be either analog or digital. Digital
Multimeter (DMM) or Digital Volt Ohm Meter (DVOM) are examples of digital models, while Analog Multimeter (AMM) is an example of the analog model.
CompTIAВ® Network+В® (Exam N10-005)
524
Copyright В© Element K Corporation
LESSON 15
Example:
Figure 15-15: Digital and analog multimeters.
Categories of Multimeters
Not all circuits are the same. Some circuits carry much higher electrical loads than
others. Be sure that you know the approximate current and impedance that the circuit
you are testing should be running at, and use the appropriately rated multimeter for the
job. Connecting an underrated multimeter to a main electrical line could result in damage to the multimeter, and possible injury to the operator.
There are various categories of multimeters that are used in different situations.
Multimeter Category
For Use In
I
Conditions where current levels are low.
II
Interior residential branch circuits.
III
Distribution panels, motors, and appliance outlets.
IV
High-current applications, such as service connections, breaker
panels for wiring mains, and household meters.
Voltmeters
A voltmeter measures voltage and resistance between two points in a circuit. Like multimeters,
voltmeters come in both digital and analog forms. A Digital Volt Meter (DVM) provides scales
for reading voltage in both AC and DC and different resistances. It can be used to test resistances between cable endpoints or voltages inside a low-power system. It should not be used
to service high-power or high-frequency equipment.
Voltage Event Recorders
A Voltage Event Recorder (VER) is another tool to use in conjunction with or in addition to a voltmeter to test and verify that the electrical signals transmitting through the
network cables are within the required speciп¬Ѓcations. VERs are attached to electrical
lines or outlets and remain there undisturbed to monitor the п¬‚ow of electricity across
the lines or within an outlet. VERs can help diagnose electrical faults or intermittent
problems regarding low or high voltage.
Lesson 15: Network Troubleshooting
525
Copyright В© Element K Corporation
LESSON 15
Cable Testers
Deп¬Ѓnition:
A cable tester, also called a media tester, is an electrical instrument that veriп¬Ѓes if a
signal is transmitted by a cable. A simple cable tester will determine whether a cable
has an end-to-end connection and can detect shorts or opens, but cannot certify the
cable for transmission quality, which is the cable installerвЂ™s responsibility. Cable testers
can differ based on their intended purpose.
Example:
Figure 15-16: Network cable testers with adapters for testing.
Distance and Speed Limitations
UTP cable links are limited to a distance of 295 feet. The speed will be either 10
Mbps or 100 Mbps depending on the type of switch used.
Cable Certiп¬Ѓers
A cable certiп¬Ѓer is a type of certiп¬Ѓer that allows you to perform tests, such as cable testing
and validity testing. It can detect shorts, crosstalk on a cable, test for the cable type and
whether a cable is straight-through or crossover, and check if the NIC is functioning and at
what speed: half or full duplex. Cable certiп¬Ѓers can also be attached to devices.
Types of Cable Testers and Certiп¬Ѓers
Several types of cable testers and certiп¬Ѓers that are available vary based on the task they are
used for.
Tool
Used To
Certiп¬Ѓcation tester
Determine whether a cable meets speciп¬Ѓc ISO or TIA standards (Cat 5e, Cat 6,
or Cat 7). Should be used if a network is wired with both copper and п¬Ѓber.
CompTIAВ® Network+В® (Exam N10-005)
526
Copyright В© Element K Corporation
LESSON 15
Tool
Used To
Qualiп¬Ѓcation tester
Measure the speeds at which a network can transmit data. Also used to
troubleshoot a network. It is not used to test networks. A qualiп¬Ѓcation tester
tests the continuity of UTP/STP cables and veriп¬Ѓes the adherence to
10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards. It also veriп¬Ѓes ring wiring standards and shield integrity.
LAN tester
Test transmission speed, cable skew, cable propagation delay, cable typing (Cat
3, 5, 5E, 6), attenuation, and cable veriп¬Ѓcation. A LAN tester carries out a
cable conduction test and a miswiring detection test.
Network cable certiп¬Ѓer
Test transmission speed and performance.
Crossover Cables
Deп¬Ѓnition:
A crossover cable is a special network cable used in Ethernet UTP installations, which
enable you to connect devices without using a hub or a switch. In a crossover cable,
the transmit and receive lines are crossed to make them work like a loopbackвЂ”a function that the switch does. In troubleshooting, crossover cables let you connect two
stationsвЂ™ network adapters directly without a switch so that you can test communications between them.
T1 Crossover
T1 crossover cable is used to connect two T1 CSU/DSU devices by using T568B
pairs.
Straight-through
The RJ 45 cable that is commonly used for network connectivity is also referred to as
straight-through cable
Crossover Cable vs. Straight Cable Wiring
In a regular Ethernet UTP patch cable, four wires are used. Pins 1 and 2 transmit and
Pins 3 and 6 receive. All lines are straight-wired (Pin 1 is wired to Pin 1, Pin 2 to Pin
2, and so forth). In a crossover cable, Pins 1 and 2 connect to Pins 3 and 6, and Pins 3
and 6 connect to Pins 1 and 2.
Cascading Hubs with a Crossover Cable
If you connect hubs via a crossover cable, you can cascade the hubs to provide more
ports for a workgroup area, rather than buying and installing a larger hub.
Example: Troubleshooting with a Crossover Cable
If you suspect that a serverвЂ™s NIC might be corrupt, you can use a crossover cable to
attach a laptopвЂ™s NIC directly to the serverвЂ™s NIC. Provided that both NICs are conп¬Ѓgured correctly, you should be able to log on to the server if the serverвЂ™s NIC is good.
Lesson 15: Network Troubleshooting
527
Copyright В© Element K Corporation
LESSON 15
Figure 15-17: A crossover cable.
Hardware Loopback Plugs
Deп¬Ѓnition:
A hardware loopback plug is a special connector used for diagnosing transmission
problems such as redirecting electrical signals back to the transmitting system. It plugs
into a port and crosses over the transmit and receive lines. Some loopback plugs are
small and plug into a port with no visible wires, while others have wires that loop visibly into the connector. Hardware loopback plugs are commonly used to test Ethernet
NICs. The plug directly connects Pin 1 to Pin 3 and Pin 2 to Pin 6.
Example:
Figure 15-18: A hardware loopback plug.
Using a Loopback Plug
If a NIC comes with hardware diagnostic capabilities, the loopback plug will be
included with the NIC. Connect the loopback plug to the installed NICвЂ™s network port,
and run the diagnostic software to verify that the NIC can send and receive data.
Loopback Wiring Standards
There are standards for loopback wiring.
CompTIAВ® Network+В® (Exam N10-005)
528
Copyright В© Element K Corporation
LESSON 15
Wiring Standard
Connects
Ethernet
вЂў Pin 1 to Pin 3
вЂў Pin 2 to Pin 6
T1
вЂў Pin 1 to Pin 4
вЂў Pin 2 to Pin 5
Time-Domain Reп¬‚ectometers
Time-Domain Reп¬‚ectometer (TDR) is a measuring tool that transmits an electrical pulse on a
cable and measures the reп¬‚ected signal. In a cable without any problems, the signal does not
reп¬‚ect and is absorbed by a terminator, if present. Bends, short circuits, and connector problems on the cable modify a signalвЂ™s amplitude before it returns to a TDR. These modiп¬Ѓcations
change how the signal reп¬‚ects back. A TDR analyzes the returned signal, and based on the
signalвЂ™s condition and its rate of return, it checks the time span and determines cable problems.
In addition, if a TDR is attached on a coaxial cable network, the TDR will indicate whether
terminators are installed properly and are functioning correctly.
Optical Time-Domain Reп¬‚ectometers (OTDRs) are a variation of TDR used speciп¬Ѓcally for
п¬Ѓber optic cabling to determine cabling issues. An OTDR transmits light signals of different
wavelengths over п¬Ѓber. Depending on the quality of the signal returned, an OTDR can accurately measure the length of the п¬Ѓber, determine locations of faulty splices, breaks, connectors
and bends, as well as measure signal attenuation over the length of the п¬Ѓber cable.
Tone Generators and Locators
Deп¬Ѓnition:
A tone generator is a device that sends an electrical signal through one pair of UTP
wires. A tone locator or a tone probe is a device that emits an audible tone when it
detects a signal in a pair of wires. Tone generators and tone locators are most commonly used on telephone systems to trace wire pairs. A digital toner and toner probe
traces and locates voice, audio, and video cabling on a network. In addition to conп¬Ѓrming the cable location, a toner and probe can verify continuity and detect faults.
The combination of a tone generator and tone locator is frequently referred to as вЂњfox and hound.вЂќ
Do not confuse tone generators and tone locators with cable testers. Tone generators and tone locators
can only help you differentiate between different UTP cables.
Lesson 15: Network Troubleshooting
529
Copyright В© Element K Corporation
LESSON 15
Example:
Figure 15-19: A tone generator and a tone locator.
Using the Tone Generator and Tone Locator
To locate a cable in a group of cables, connect the tone generator to the copper ends of
the wires; then move the tone locator over the group of cables. A soft beeping tone
indicates that you are close to the correct wire set; when the beeping is loudest, you
have found the cable.
Do not connect a tone generator to a cable that is connected to a NIC. The signal sent by the tone generator can destroy network equipment.
Environment Monitors
Deп¬Ѓnition:
Environment monitors are hardware tools that ensure that environmental conditions do
not spike or plummet temperature above or below equipment speciп¬Ѓcations. In addition
to temperature, environment monitors allow you to monitor the humidity in the environment where the network devices are placed. By monitoring humidity, you can
ensure that condensation does not build in devices, and that there is enough humidity
to decrease static electricity buildup.
Example:
You can monitor a computer room with a humidity monitor or you can use sensors to
monitor the temperature inside servers, workstations, and components such as hard
drives.
Butt Sets
Deп¬Ѓnition:
A butt set, also known as a linemanвЂ™s test set, is a special type of telephone handset
used by telecom technicians when installing and testing local lines. It is called a butt
set because the technician вЂњbuttsвЂќ into telephone lines to detect issues. The butt set
allows a technician to bridge onto wire pairs with clips in order to monitor the line and
use dialing features as if it was a physical phone on the system. This feature allows a
technician to determine any problems that exist. Some butt sets can detect polarity
reversals and other line faults to troubleshoot performance issues.
CompTIAВ® Network+В® (Exam N10-005)
530
Copyright В© Element K Corporation
LESSON 15
Example:
Figure 15-20: A butt set.
LED Indicators
LED indicators on network adapters, switches, routers, and cable and DSL modems can give
you information about the status of the network connection. There are different types of LED
indicators.
Indicator
Description
Link indicators
Most adapters have a link indicator to visually indicate signal reception from the
network. If the link indicator is not lit, it could indicate a problem with the cable
or the physical connection.
Activity indicators
Most adapters also have an activity indicator that п¬‚ickers when data packets are
received or sent. If the indicator п¬‚ickers constantly, the network might be overused or there is a system generating noise.
Speed indicators
Dual-mode adapters have a speed indicator to display whether the adapter is operating at 10 Mbps, 100 Mbps, or at 1 Gbps.
Dual-color indicators
Uses dual-color indicators to indicate different network states. For example, a
green п¬‚ickering indicator might indicate normal activity, while an amber п¬‚ickering indicator indicates collisions on the network.
Lesson 15: Network Troubleshooting
531
Copyright В© Element K Corporation
LESSON 15
Figure 15-21: Indicators on a network adapter.
Network Analyzers
Deп¬Ѓnition:
A network analyzer, also known as a packet or protocol analyzer, or a packet sniffer, is
a software or hardware tool that integrates diagnostic and reporting capabilities to provide a comprehensive view of an organizationвЂ™s network. As data п¬‚ows across a
network, an analyzer will intercept it, log it, and analyze the information according to
baseline speciп¬Ѓcations.
Basic network analyzers enable a technician to analyze network traffic on a LAN or
DSL connection. Network analyzers also have the ability to provide an administrator
with an overview of systems and reports from one location on the network. Fullfeatured network analyzers offer a variety of monitoring, analyzing, and reporting
functions. A network analyzer can be used during troubleshooting to locate problems,
but it can also be used as a long-term network monitoring solution.
Example:
Wireshark and Microsoft Network Monitor are software that can analyze networks.
CompTIAВ® Network+В® (Exam N10-005)
532
Copyright В© Element K Corporation
LESSON 15
Figure 15-22: The Network Monitor utility provides network statistics.
Network Sniffer
Similar to a packet sniffer, a network sniffer can identify and capture data packets on a
network, record and analyze traffic, and identify open ports on the network. They can
possibly analyze data packets from different protocols and identify data vulnerabilities
on the network.
Throughput testers
You can measure the throughput of a network using various tools available on different
operating systems. One of the methods will be to measure maximum data throughput
in bits per second of network access or a communication link. Another method of measuring the network performance is to transfer a вЂњlargeвЂќ п¬Ѓle from one system to another
and calculate the time required to complete the transfer the п¬Ѓle or copy it. The
throughput can be determined by dividing the п¬Ѓle size by the total time and expressed
as megabits, kilobits or bits per second.
Demarc
Deп¬Ѓnition:
A demarc is a demarcation point where a buildingвЂ™s wiring ends and the telephone
companyвЂ™s wiring begins. Any premises connected to the telephone company wiring
include a demarc, including residential buildings as well as commercial and industrial
buildings. A demarc can be installed on the outside of the building, as is common with
residential demarcs, or it can be installed inside the building, as is the case with most
commercial and industrial demarcs.
Example: Smart Jack
A smart jack is a device that serves as the demarcation point between the end userвЂ™s
inside wiring and local access carriersвЂ™ facilities.
Lesson 15: Network Troubleshooting
533
Copyright В© Element K Corporation
LESSON 15
Demarc Extension
A new networking solution may require that the point where a network connectivity
line (such as DSL, T1, or T3) terminates within or just outside of a building be
extended further to accommodate the extended connectivity segment.
Wireless Testers
A wireless tester is a Wi-Fi spectrum analyzer used to detect devices and points of interference, as well as analyze and troubleshoot network issues on a WLAN or other wireless
networks. Like network analyzers, wireless testers give an overview of the health of a WLAN
in one central location, enabling technicians to troubleshoot problems efficiently.
Spectrum Analyzer
A spectrum analyzer is an instrument that displays the variation of signal strength
against the frequency.
WLAN Survey Software
WLAN survey software is used to plan, simulate, and implement WLANs. WLAN survey software can simulate WLAN performance during the planning phase even before any installation
takes place. Technicians can use the software to analyze WLAN performance before and after
implementation to determine the health of the network based on deп¬Ѓned, measurable criteria.
WLAN survey software can also be used to deп¬Ѓne network coverage areas before implementation.
ACTIVITY 15-5
Identifying Hardware Troubleshooting Tools
Scenario:
In this activity, you will identify the functions of various hardware troubleshooting tools.
1.
You have a cable with a frayed end. You want to trim the cable and reattach the connector. You need a:
a) Punch down tool
b) Wire crimper
c) Cable tester
d) Cable stripper
2.
You need to trace a UTP cable in a bundle of cables. You need a:
a) Butt set
b) Circuit tester
c) Cable tester
d) Tone generator and locator
CompTIAВ® Network+В® (Exam N10-005)
534
Copyright В© Element K Corporation
LESSON 15
3.
A workstation and server on your small office network cannot communicate. To see if
one of the network adapters is bad, you can connect them directly by using a:
a) Crossover cable
b) Hardware loopback plug
c) Tone generator and locator
d) Punch down tool
4.
A user tells you he cannot log on to the network. You direct him to check his network
adapter and he notices that there is one steady indicator and one flashing indicator.
What does this indicate to you about the status of the connection?
a) There is a network connection but there is no data transfer.
b) There is no network connection.
c) There is a network connection that is transferring data.
d) The network adapter is faulty.
5.
What does an amber indicator on a NIC indicate?
a) A frame error
b) A dysfunctional transceiver
c) Bad network connectivity
d) Data collisions
e) A cable break
6.
You are a network administrator and you recently replaced the NIC in a userвЂ™s
machine. You receive a call from the user, who complains that there is no network
connectivity. Which LED indicator on the NIC should you check first? Why?
a) Activity
b) Collision
c) Link
d) Cable
7.
Your instructor will show examples of various types of hardware tools. Identify each
tool and its function, and give an example of how you would use it in network troubleshooting.
Lesson 15: Network Troubleshooting
535
Copyright В© Element K Corporation
LESSON 15
OPTIONAL PRACTICE ACTIVITY 15-6
Assembling a Patch Cable
Scenario:
You need an extra length of patch cable to attach a client computer to the network. You do not
have a cable assembled, but you do have some cable wire and loose connectors.
1.
Strip the cable jacket back about 3/4 of an inch. Do not cut or nick the inner
wires.
2.
Place the pairs in the order of their color so that they lie flat and slip into the
connector.
3.
Slip the wires into the connector and ensure that they are properly seated and in
the correct order. Ensure that the outer jacket is far enough into the connector
that it will be captured by the strain relief tab.
A 5x magniп¬Ѓcation eye loupe will help you examine the wires.
4.
Insert the cable/connector assembly into the crimping tool and crimp it.
5.
Use the cable tester to test your cable.
TOPIC D
Common Connectivity Issues
Now that you are familiar with the common software and hardware tools used in network
troubleshooting, you should also familiarize yourself with the types of connectivity issues you
may encounter as a network administrator. In this topic, you will describe common network
connectivity issues.
A network can be simple or complexвЂ”but even at the most simplistic level, there are numerous connectivity issues that occur on a regular basis. Each time there is a problem with
network connectivity, you will be faced with a large number of very unhappy users. In order to
restore connectivity as quickly as possible, you will need to be aware of the possible connectivity issues you may face and the appropriate п¬Ѓxes.
CompTIAВ® Network+В® (Exam N10-005)
536
Copyright В© Element K Corporation
LESSON 15
Physical Issues
When troubleshooting network problems, it is helpful to understand the issues that can arise.
Having this understanding will enable you to solve problems more efficiently. There are several
categories of physical connectivity issues.
Issue
Description
Cross-talk
Symptoms: Slow network performance and an excess of dropped or unintelligible
packets. In telephony applications, users hear garbled voice or conversations from
another line.
Causes: Generally, cross-talk occurs when two cables run in parallel and the signal of
one cable interferes with the other. Cross-talk can also be caused by crossed or
crushed wire pairs in twisted pair cabling.
Resolution: The use of twisted pair cabling or digital signals can reduce the effects of
crosstalk. Maintaining proper distance between cables can also help.
Near-end crosstalk
Symptoms: Signal loss or interference.
Causes: Near-end cross-talk occurs closer along the transmitting end of the cable.
Often occurs in or near the terminating connector.
Resolution: Test with cable testers from both ends of the cable and correct any
crossed or crushed wires. Verify that the cable is terminated properly and that the
twists in the pairs of wires are maintained.
Attenuation
Symptoms: Slow responses from the network.
Causes: Degradation of signal strength.
Resolution: In case of wired networks, use shorter cable runs. In case of wireless
networks, add more access points and signal boosters along the transmission path. A
longer cable length, poor connections, bad insulation, a high level of crosstalk, or
EMI can all increase attenuation. Evaluate the environment for interference. The type
of signal interference would depend on the wireless spectrum used.
Collisions
Symptoms: High latency, reduced network performance, and intermittent connectivity
issues.
Causes: Collisions tend to occur on networks as nodes attempt to access shared
resources.
Resolution: Depends on the network. For example, on a network still using hubs,
replacing a hub with a switch will often alleviate the problem.
Shorts
Symptoms: Electrical shortsвЂ”complete loss of signal.
Causes: Two nodes of an electrical circuit that are meant to be at different voltages
create a low-resistance connection causing a short circuit.
Resolution: Use a TDR to detect and locate shorts. Replace cables and connectors.
Open impedance mismatch
Symptoms: Also known as echo, the tell-tale sign of open impedance mismatch is an
echo on either the talker or listener end of the connection.
Causes: The mismatching of electrical resistance.
Resolution: Use a TDR to detect impedance. Collect and review data, interpret the
symptoms, and determine the root cause in order to correct the cause.
Lesson 15: Network Troubleshooting
537
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Interference
(EMI)
Symptoms: Crackling, humming, and static are all signs of interference. Additionally,
low throughput, network degradation, and poor voice quality are also symptoms of
interference.
Causes: RF interference can be caused by a number of devices including cordless
phones, Bluetooth devices, cameras, paging systems, unauthorized access points, and
clients in the ad-hoc mode.
Resolution: Remove or avoid environmental interferences as much as possible. This
may simply entail turning off competing devices or relocating them. Ensure that there
is adequate LAN coverage. To resolve problems proactively, test areas prior to
deployment using tools such as spectrum analyzers.
Bad modules
(SFPs, GBICs)
Symptoms: Faulty SFPs/GBICs are identiп¬Ѓed by various means by the manufacturers.
The system console on the switch may use distinct colors such as amber or red to
help you locate the faulty SFPs/GBICs. There will be no communication through the
faulty device.
Causes: Modules in SFPs/GBICs get corrupted.
Resolution: Replace the faulty SFPs/GBICs.
Cable problems
Symptoms: The nodes on the network cannot communicate. The router, switches, and
the individual nodes on the network are fully functional, but the problem still persists.
Causes: There is problem with the network cables.
Resolution: There could be issues with the network cables. Identify the issue and
determine a suitable solution.
Bad connectors вЂ” Check and replace the faulty connectors. Verify that the cables are
properly secured to the connectors, and are properly crimped.
Bad wiring вЂ” Check and replace the wires that are in bad condition.
Open, short cables вЂ” Use cable testers and locate open or short cables. Repair the
cables and recheck that the issues are resolved. If not, replace the cables.
Split cables вЂ” Identify the split cables and replace them with compatible cables.
DB loss вЂ” Check the cable for defects or damage, crimping, and connection with the
connectors. Identify and remove sources of interference.
TXRX reversed вЂ” Check the network port indicators on the system; if the link light
is off, there is an issue with the network adapter. Replace the network adapter.
Cable placement вЂ” Verify that the cable is placed away from source of EMI. Identify
and remove the sources of interference.
Distance вЂ” Verify that the cables are run only for the maximum distance they are
supported. For example, if an Ethernet cable exceeds 100 meters, the signal will deteriorate.
Bad cables/
improper cable
types
Symptoms: Cables that connect different parts of a network are cut or shorted.
Causes: A short can happen when the wire conductor comes in contact with another
conductive surface, changing the path of the signal.
Resolution: Cable testers can be used to detect many types of cable problems such
as: cut cable, incorrect cable connections, cable shorts, interference, and faulty connectors. After identifying the source of the issue, move the cable to prevent it from
coming in contact with other conductive surface.
Logical Issues
In addition to physical connectivity issues, your network can suffer from connectivity issues on
the logical layer, which range from no connectivity to lost connectivity and can vary in severity.
CompTIAВ® Network+В® (Exam N10-005)
538
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Port speed
Symptoms: No or low speed connectivity between devices.
Cause: Ports are conп¬Ѓgured to operate at different speeds and are therefore
incompatible with each other.
Resolution: Verify that equipment is compatible and is operating at compatible
speeds. For example, if youвЂ™re running a switch at 100 Mbps, but a computerвЂ™s
NIC runs at 10 Mbps, the computer will be slow. Replace the NIC with one that
runs at 100 Mbps and you will increase the throughput to a higher level (or at
least a theoretical higher level since there are other variables such as network
congestion).
Port duplex mismatch
Symptoms: Late collisions, port alignment errors, and FCS errors are present
during testing.
Causes: Mismatches are generally caused by conп¬Ѓguration errors. They occur
when the switch port and a device are conп¬Ѓgured to use a different set of duplex
settings, or when both ends are set to auto negotiate the settings.
Resolution: Verify that the switch port and device are conп¬Ѓgured to use the same
duplex setting. This may entail having to upgrade one of the devices.
Wrong VLAN
Symptoms: No connectivity between devices.
Causes: Devices are conп¬Ѓgured to use different VLANs.
Resolution: Reconп¬Ѓgure devices to use the same VLAN.
Wrong IP address
Symptoms: No connectivity between devices.
Causes: Either the source or destination device has an incorrect IP address.
Resolution: Use the ping command to determine if there is connectivity
between devices. Resolution will depend on the problem. If a network is running
a rogue DHCP server, for example, two computers could have been leased the
same IP address. Check TCP/IP conп¬Ѓguration info using ipconfig /all on
Windows machines, and ifconfig on Linux/UNIX/MAC machines. After conп¬Ѓrming the issue, troubleshoot DHCP. It could also be the case that a static IP
address was entered incorrectly. Check IP addresses, and empty the ARP cache on
both computers.
Wrong gateway
address
Symptoms: No connectivity between devices.
Causes: The IP address of the gateway is incorrect for the speciп¬Ѓed route.
Resolution: Change the IP address of the gateway to the correct address.
Wrong DNS
Symptoms: No connectivity between devices.
Causes: A device is conп¬Ѓgured to use the wrong DNS server.
Resolution: Open TCP/IP properties and check the IP address of the DNS server
listed for the client. Replace with the correct IP address and test connectivity.
Wrong subnet mask
Symptoms: No connectivity between devices.
Causes: Either the source or destination device has an incorrect subnet mask.
Resolution: Use the ping command to determine if there is connectivity
between devices. Check the subnet mask on both devices. Change the incorrect
subnet mask to a correct one and test connectivity.
Duplicate IP address Symptoms: System displays notiп¬Ѓcation that the same IP address is in use on the
network. No connectivity between devices.
Causes: The same IP address is assigned to more than one system.
Resolution: In case the network is DHCP-enabled, try to identify the systems
that are assigned IP addresses manually and change the IP address of such systems to be outside the DHCP scope. If the network is not DHCP-enabled, locate
the systems that have the same IP address, and change the IP address in one of
the systems.
Lesson 15: Network Troubleshooting
539
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Power failure
Symptoms: There is a power failure that affects switches and routers.
Causes: Switch and router adapters connect to cable modems which depend on
the availability of power.
Resolution: Use cable modems and other network devices with battery-backed
power supplies to ensure that there is uninterrupted service of several hours in
case of local power failures.
Bad/missing routes
Symptoms: The router is sending packets using an invalid path.
Causes: The router setting is incorrect.
Resolution: Check and change the router setting and reboot the router for the
changes to be effected.
Wireless Issues
In addition to the physical and logical connectivity issues you can encounter while troubleshooting a wired network, wireless networks present their own issues.
Issue
Description
Interference
Symptoms: Low throughput, network degradation, dropped packets, intermittent connectivity, and poor voice quality are all symptoms caused by
interference.
Causes: RF interference can be caused by a number of devices including
cordless phones, Bluetooth devices, cameras, paging systems, unauthorized
access points, metal building framing, and clients in ad-hoc mode.
Resolution: Remove or avoid environmental interferences as much as possible.
Incorrect encryption
type
Symptoms: If the encryption types between two devices (access point and client) do not match, no connection is established. Similarly, if different
encryption keys are used between two devices, they cannot negotiate key information for veriп¬Ѓcation and decryption in order to initiate communication.
Causes: Improper conп¬Ѓguration and different encryption types.
Resolution: Ensure that security settings match between and among devices.
Congested channel
Symptoms: Very slow speeds.
Causes: Interference from neighboring wireless networks; congested network
channels.
Resolution: Many wireless routers are set to autoconп¬Ѓgure the same wireless
channel. Try logging in to the router and manually change the channel the wireless router is operating on.
Incorrect frequency
Symptoms: No connectivity.
Causes: Devices must operate on the same frequency. For example, a device to
communicate at 5 GHz frequency cannot communicate with one designed to
communicate at 2.4 GHz.
Resolution: Deploy devices that operate on the same frequency.
SSID mismatch
Symptoms: No connectivity between devices.
Causes: Devices are conп¬Ѓgured to use different ESSIDs.
Resolution: Set the devices to use the same SSID. Ensure that the wireless client and the access point are the same. Note: SSIDs are case-sensitive.
CompTIAВ® Network+В® (Exam N10-005)
540
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Standard mismatch
Symptoms: No connectivity between devices.
Causes: Devices are conп¬Ѓgured to use different standards such as 802.11a/b/
g/n.
Resolution: Devices chosen to work together should use the same standard to
operate. 802.11a, for example, is incompatible with 802.11b/g because the п¬Ѓrst
operates at 5 GHz and the second at 2.4 GHz. Or, a 802.11g router could be set
only for вЂњgвЂќ mode and you are trying to connect with a 802.11b wireless card.
Both 802.11b and 802.11g transmit at 2.4 GHz. Their throughput is different
with 802.11b at 11 Mbps and 802.11g at 54 Mbps. Change the mode on the
router.
Signal strength
Symptoms: Low signal strength and throughput.
Causes: The distance between two points causes this connectivity issue. The
longer the distance between two devices, the lower is the signal strength. Issues
that can occur because of low signal strength include latency, packet loss,
retransmission, or transient traffic.
Resolution: Add another access point to increase coverage. Use a spectrum
analyzer to determine coverage and signal strength.
Bounce
Symptoms: No or low connectivity between devices.
Causes: Signals from device bounce off obstructions and are not received by
the receiving device.
Resolution: If possible, move one of the devices to avoid obstructions. Monitor
performance and check for interference.
Antenna placement
Symptoms: No or low signal and connectivity.
Causes: The position of your antenna can negatively affect overall performance, if placed incorrectly.
Resolution: Alter the position of your antenna and monitor device performance.
Conп¬Ѓgurations
Symptoms: Wireless modem is active, but clients cannot access the Internet.
Causes: Conп¬Ѓguration of the wireless modem is incorrect.
Resolution:
вЂў Check the conп¬Ѓguration of the wireless modem by accessing the web admin
interface.
вЂў Check the encryption type, SSID, and pass phrase text that is speciп¬Ѓed and
conп¬Ѓrm that the wireless modem was rebooted after the conп¬Ѓguration
change.
вЂў Ensure that the clients can also support the same encryption type.
вЂў Verify that the same SSID and key phrase are deп¬Ѓned in the network connection.
вЂў Verify that the wireless receiver on the desktop system is conп¬Ѓgured properly with the correct compatible drivers installed.
вЂў Similarly, for a laptop, check that the wireless network adapter is functional
and is turned on. If needed, update the device driver on the client systems.
Note: Typically, http://192.168.1.1 will be the address for accessing the
admin interface. This may vary based for some routers, refer the user manual or
the manufacturer site for actual address.
Lesson 15: Network Troubleshooting
541
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Incompatibilities
Symptoms: The wireless device is not accessible from the client.
Causes: The settings on the wireless device is not compatible with the clients.
Resolution: Check the conп¬Ѓguration of the wireless modem by accessing the
web admin interface. Verify that the client systems can support the same conп¬Ѓguration. If not, identify the conп¬Ѓguration, such as the encryption type,
supported on both the clients and the server and apply the same on the wireless
device and the client systems.
Incorrect channel
Symptoms: The wireless signal is not accessible even within the expected
range.
Causes: Number of factors can cause the signal of the WAP to deteriorate and
the performance of your network will dip lower than normal. Most common
cause could be a another wireless device or application that operates at the
same frequency level creating a conп¬‚ict.
Resolution: Identify the conп¬‚icting device and move it to another location that
is outside the reach of the WAP. If it is not possible to relocate devices, change
the channel of one of the devices such that they operate at a different frequency. Ensure that the cordless phones, microwaves, and other electrical
equipment are kept a safe distance away from the access point.
Latency
Symptoms: Delay in data transmission on the network is very high.
Causes: The signal strength is weak or the position of the wireless antenna is
modiп¬Ѓed.
Resolution: Verify that the wireless modem is functional. Change the antenna
position to the position that gives the best performance. Ensure that your
antenna is maintained at the same position.
Incorrect switch
placement
Symptoms: Switch performance is considerably reduced.
Causes: There is a conп¬‚icting device in the range which is causing the interference that results in the switch performance being degraded.
Resolution: Locate the conп¬‚icting device and, if possible, move it to another
location. If that is not possible, rework on your network layout and determine a
better position for the switch such that there is no conп¬‚ict with the other
devices. Monitor the switch performance periodically to prevent further occurrence of the issue.
Routing and Switching Issues
There are common router and switch issues that can occur on a network.
Issue
Description
Switching loop
Symptoms: There is a switching loop on the network.
Causes: Packets are switched in a loop.
Resolution: A switching loop needs STP to ensure loop-free switching of
data. Rework on the network arrangement and cabling to prevent the switching loop.
Routing loop
Symptoms: There is a routing loop on the network.
Causes: Packets are routed in a loop.
Resolution: Recheck the router conп¬Ѓguration and adjust it to prevent a routing loop.
CompTIAВ® Network+В® (Exam N10-005)
542
Copyright В© Element K Corporation
LESSON 15
Issue
Description
Route problems
Symptoms: Packets do not reach their intended destination.
Causes: This could be caused by conп¬Ѓguration problems, route convergence,
broken segments, or router malfunctioning.
Resolution: Verify that the router is functional. If necessary, replace the
router.
Proxy arp
Symptoms: The proxy server is not functional.
Causes: The proxy settings are misconп¬Ѓgured. This may lead to DoS attacks.
Resolution: Correct the proxy settings to resolve the issue.
Broadcast storms
Symptoms: The network becomes overwhelmed by constant broadcast traffic
generated by a device on the network.
Causes: There are too many broadcast messages being sent parallelly causing
high network traffic.
Resolution: Identify the device and reconп¬Ѓgure it to increase the interval of
broadcast messages. On the network, apply restrictive settings to prevent network nodes from sending broadcast messages.
Port conп¬Ѓguration
Symptoms: Port conп¬Ѓguration is incorrect.
Causes: The recent changes made to the port conп¬Ѓguration were incorrect.
Resolution: On the system console of the switch, verify the port properties of
the individual nodes and check their status. If required, restore the port conп¬Ѓguration to its default setting from the last backup.
VLAN assignment
Symptoms: Nodes on the network cannot communicate with one other.
Causes: By default, computers on different segments are added to different
VLANs, and they cannot communicate with one another, unless the switch is
conп¬Ѓgured to allow communication between computers on different VLANs.
Resolution: Check the VLAN assignment on the switch console and reassign
the computers to the VLAN to enable communication among them. Ensure
that the IOS of the switch is updated to reп¬‚ect the latest settings.
Mismatched MTU/MUT Symptoms: MTU is inaccessible.
black hole
Causes: In case of a mismatch of the MTU, the TCP/IP connection handshake does not occur between the devices (routers) and the connection cannot
be established.
Resolution: Reconп¬Ѓgure the MTU to check whether the problem gets
resolved. If not replace the device.
At times, there will be issues you will encounter that need to be escalated in order to be solved. This is an
important aspect of network troubleshooting, since solutions may require input from people who are more experienced in switching or routing conп¬Ѓgurations and operations.
Lesson 15: Network Troubleshooting
543
Copyright В© Element K Corporation
LESSON 15
ACTIVITY 15-7
Discussing Network Connectivity Issues
Scenario:
You and a coworker are investigating some complaints by people regarding their inability to
remain connected to the network.
1.
Match the physical connectivity issue with its most plausible cause or symptom.
Crosstalk
Attenuation
Shorts
Impedance mismatch
Interference
2.
Low volume or data loss
Crackling noise
Echo
Unrelated signal reception
No connectivity
Match the logical connectivity issue with its most plausible cause or symptom.
Port speed
Port duplex mismatch
Incorrect VLAN
3.
a.
b.
c.
d.
e.
a. Collisions and alignment errors
b. Low connectivity between devices
c. No connectivity
An client visiting your company found that his 802.11b wireless card cannot connect to
your companyвЂ™s 802.11g wireless network. Of the following choices, which is most
likely?
a) 802.11b broadcasts at 5 GHz, while 802.11g is 2.4 GHz.
b) Incompatibility between 802.11b and g.
c) A rogue DHCP server.
d) Too many wireless devices sharing the access point.
4.
An employee has complained that conference calls in Conference Room 1 routinely get
interrupted by periods of white noise, and that the speaker often has every other
word cut off. You have discovered that the roomвЂ™s network cable has been run over by
a chairвЂ™s wheel, and that the wires have been crushed. What is this an example of?
a) Packet loss
b) Near-end crosstalk
c) Far-end crosstalk
d) Network drain
CompTIAВ® Network+В® (Exam N10-005)
544
Copyright В© Element K Corporation
LESSON 15
ACTIVITY 15-8
Troubleshooting Network Connectivity
Scenario:
In this activity, you will identify the cause of network connectivity problems.
1.
You receive a call from a network user who has lost all network connectivity. You
examine the network components on the userвЂ™s station and segment and discover the
situation shown in the graphic.
Which network component has failed?
2.
Which network device(s) will be affected? Why?
Lesson 15: Network Troubleshooting
545
Copyright В© Element K Corporation
LESSON 15
3.
Another network user calls complaining that he cannot connect to a server. You try to
connect to various network devices and examine the network components and discover the situation shown in the graphic.
What is the cause of the connectivity failure?
4.
Which network device(s) will be affected? Why?
CompTIAВ® Network+В® (Exam N10-005)
546
Copyright В© Element K Corporation
LESSON 15
5.
Your companyвЂ™s network is spread across several locations within the city. One of your
network operations centers has experienced a power surge and you are concerned
about the effect on network connectivity. You try to connect to various network
devices and discover the situation shown in the graphic.
Which network device has failed?
6.
What area of the network will be affected?
7.
Your network uses UTP CAT 5 cable throughout the building. There are a few users
who complain of intermittent network connectivity problems. You cannot determine a
pattern for these problems that relates to network usage. You visit the usersвЂ™ workstations and find that they are all located close to an elevator shaft. What is a likely cause
of the intermittent connectivity problems?
8.
How might you correct the problem?
Lesson 15: Network Troubleshooting
547
Copyright В© Element K Corporation
LESSON 15
Lesson 15 Follow-up
In this lesson, you identiп¬Ѓed the functions of major network monitoring tools and the troubleshooting process to help you resolve network problems efficiently.
1.
In your troubleshooting experience, what types of problems have you encountered?
How did you diagnose the problems?
2.
In your opinion, what are the common TCP/IP issues that you encounter during
troubleshooting?
CompTIAВ® Network+В® (Exam N10-005)
548
Copyright В© Element K Corporation
Follow-up
FOLLOW-UP
In this course, you identiп¬Ѓed and described all the major networking technologies, systems,
skills, and tools in use in modern PC-based computer networks. You also learned information
and skills that will be helpful as you prepare for the CompTIA Network+ examination, (exam
number N10-005).
WhatвЂ™s Next?
The material in CompTIA Network+В® (Exam N10-005) provides foundational information and
skills required in any network-related career. It also assists you in preparing for the CompTIA
Network+ exam. Once you have completed CompTIAВ® Network+В® (Exam N10-005), you
might wish to continue your certiп¬Ѓcation path by taking the Element K course CompTIAВ®
Security+В® (Exam SY0-301) (Comprehensive), which can help you prepare for the CompTIA
Security+ exam. Or, you can take any one of a number of vendor-speciп¬Ѓc networking technology or administration courses from Element K, including courses leading to professional-level
certiп¬Ѓcations from Microsoft and Novell.
549
Copyright В© Element K Corporation
NOTES
CompTIAВ® Network+В® (Exam N10-005)
550
Copyright В© Element K Corporation
APPENDIX A
APPENDIX A
Mapping Network+ Course
Content to the CompTIA
Network+ Exam Objectives
1.0 Networking Concepts
1.1 Compare the layers of the OSI and TCP/IP models.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
Lesson 5, Topic A
вЂў OSI model
вЂ” Layer 1 вЂ“ Physical
вЂ” Layer
вЂ” Layer
вЂ” Layer
вЂ” Layer
вЂ” Layer
2
3
4
5
6
вЂ“
вЂ“
вЂ“
вЂ“
вЂ“
Data link
Network
Transport
Session
Presentation
вЂ” Layer 7 вЂ“ Application
Lesson 5, Topic B
вЂў TCP/IP model
вЂ” Network Interface Layer
вЂ” Internet Layer
вЂ” Transport Layer
вЂ” Application Layer(Also described as: Link Layer,
Internet Layer, Transport Layer, Application Layer)
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
551
APPENDIX A
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў MAC address
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
3, Topic D
4, Topic A
5, Topic A
6, Topic A
13, Topic B
14, Topic A
15, Topic B
вЂў IP address
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
1, Topic B
6, Topics A, B, C, D, and E
7, Topics A and B
8, Topics A and B
9, Topics A and B
12, Topics A and B
13, Topic B
14, Topic A
15, Topic B
вЂў EUI-64
Lesson 4, Topic A
вЂў Frames
Lesson
Lesson
Lesson
Lesson
4,
5,
6,
9,
вЂў Packets
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
Lesson
1, Topic D
3, Topic D
4, Topic A
5, Topics A and B
6, Topics A, B, and F
7, Topic C
8, Topics A, B, C, and D
9, Topics A and C
12, Topics A, B, and C
13, Topic B
14, Topics A and C
15, Topics B and C
вЂў Switch
Lesson
Lesson
Lesson
Lesson
Lesson
1,
3,
4,
5,
8,
вЂў Router
Lesson 3, Topic D
Lesson 8, Topics B, C, and E
вЂў Multilayer switch
Lesson 8, Topic A
вЂў Hub
Lesson 3, Topic D
вЂў Encryption devices
Lesson 11, Topic D
вЂў Cable
Lesson 3, Topic A
вЂў NIC
Lesson 3, Topic D
Topics A and B
Topics A and B
Topic B
Topic A
Topic A
Topic D
Topic A
Topic A
Topics A, B, D, and E
CompTIAВ® Network+В® (Exam N10-005)
552
Copyright В© Element K Corporation
APPENDIX A
1.2 Classify how applications, devices, and protocols relate to the OSI model layers.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Bridge
Lesson 3, Topic D
1.3 Explain the purpose and properties of IP addressing.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Classes of addresses
вЂ” A, B, C and D
вЂ” Public vs. Private
Lesson 6, Topic C
вЂў Classless (CIDR)
Lesson 6, Topic D
вЂў IPv4 vs. IPv6 (formatting)
Lesson 6, Topic E
вЂў MAC address format
Lesson 4, Topic A
вЂў Subnetting
Lesson 6, Topic B
вЂў Multicast vs. unicast vs. broadcast
Lesson 2, Topic A
вЂў APIPA
Lesson 7, Topic A
1.4 Explain the purpose and properties of routing and switching.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў EIGRP
Lesson 8, Topic C
вЂў OSPF
Lesson 8, Topic C
вЂў RIP
Lesson 8, Topic C
вЂў Link state vs. distance vector vs. hybrid
Lesson 8, Topic C
вЂў Static vs. dynamic
Lesson 8, Topic C
вЂў Routing metrics
вЂ” Hop counts
Lesson 8, Topic B
вЂ” MTU, bandwidth
вЂ” Costs
вЂ” Latency
вЂў Next hop
Lesson 6, Topic A
Lesson 8, Topics B and C
Lesson 15, Topic B
вЂў Spanning-Tree Protocol
Lesson 8, Topic C
вЂў VLAN (802.1q)
Lesson 8, Topic D
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
553
APPENDIX A
1.4 Explain the purpose and properties of routing and switching.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Port mirroring
Lesson 3, Topic D
вЂў Broadcast domain vs. collision domain
Lesson 2, Topic B
вЂў IGP vs. EGP
Lesson 8, Topic B
вЂў Routing tables
Lesson 8, Topics B and C
Lesson 15, Topic B
вЂў Convergence (steady state)
Lesson 8, Topic C
1.5 Identify common TCP and UDP default ports.
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
Exam Objective
Lesson 7, Topic A
вЂў SMTP вЂ“ 25
вЂў HTTP вЂ“ 80
вЂў
вЂў
вЂў
вЂў
вЂў
HTTPS вЂ“ 443
FTP вЂ“ 20, 21
TELNET вЂ“ 23
IMAP вЂ“ 143
RDP вЂ“ 3389
вЂў SSH вЂ“ 22
вЂў DNS вЂ“ 53
вЂў DHCP вЂ“ 67, 68
1.6 Explain the function of common networking protocols.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў TCP
Lesson 5, Topics A and B
Lesson 6, Topics A and B
вЂў FTP
Lesson 5, Topic A
Lesson 7, Topic D
вЂў UDP
Lesson 6, Topic A
вЂў TCP/IP suite
Lesson 6, Topic A
вЂў DHCP
Lesson 7, Topic A
вЂў TFTP
Lesson 7, Topic D
вЂў DNS
Lesson 7, Topic B
вЂў HTTPS
Lesson 7, Topic D
CompTIAВ® Network+В® (Exam N10-005)
554
Copyright В© Element K Corporation
APPENDIX A
1.6 Explain the function of common networking protocols.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў HTTP
Lesson 7, Topic D
вЂў ARP
Lesson 6, Topic A
вЂў SIP (VoIP)
Lesson 9, Topic C
вЂў RTP (VoIP)
Lesson 9, Topic C
вЂў SSH
Lesson 7, Topic E
вЂў POP3
Lesson 7, Topic D
вЂў NTP
Lesson 7, Topic D
вЂў IMAP4
Lesson 7, Topic D
вЂў Telnet
Lesson 7, Topic E
вЂў SMTP
Lesson 7, Topic D
вЂў SNMP2/3
Lesson 14, Topic A
вЂў ICMP
Lesson 6, Topic A
вЂў IGMP
Lesson 6, Topic A
вЂў TLS
Lesson 11, Topic D
1.7 Summarize DNS concepts and its components.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў DNS servers
Lesson 7, Topic B
вЂў DNS records (A, MX, AAAA, CNAME, PTR)
Lesson 7, Topic B
вЂў Dynamic DNS
Lesson 7, Topic B
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
555
APPENDIX A
1.8 Given a scenario, implement the following network troubleshooting methodology:
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Identify the problem:
вЂ” Information gathering
вЂ” Identify symptoms
вЂ” Question users
вЂ” Determine if anything has changed
Lesson 15, Topic A
вЂў Establish a theory of probable cause
вЂ” Question the obvious
вЂў Test the theory to determine cause:
вЂ” Once theory is conп¬Ѓrmed determine next steps to
resolve problem.
вЂ” If theory is not conп¬Ѓrmed, re-establish new theory
or escalate.
вЂў Establish a plan of action to resolve the problem and
identify potential effects
вЂў Implement the solution or escalate as necessary
вЂў Verify full system functionality and if applicable
implement preventative measures
вЂў Document п¬Ѓndings, actions and outcomes
1.9 Identify virtual network components.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў Virtual switches
Lesson 3, Topic D
вЂў Virtual desktops
Lesson 3, Topic D
вЂў Virtual servers
Lesson 3, Topic D
вЂў Virtual PBX
Lesson 3, Topic D
вЂў Onsite vs. offsite
Lesson 10, Topic C
вЂў Network as a Service (NaaS)
Lesson 3, Topic D
2.0 Network Installation and Conп¬Ѓguration
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
Lesson 8, Topics B and C
Lesson 15, Topic B
вЂў Routing tables
CompTIAВ® Network+В® (Exam N10-005)
556
Copyright В© Element K Corporation
APPENDIX A
2.0 Network Installation and Conп¬Ѓguration
2.1 Given a scenario, install and conп¬Ѓgure routers and switches.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў NAT
Lesson 12, Topic A
вЂў PAT
Lesson 12, Topic A
вЂў VLAN (trunking)
Lesson 3, Topic D
Lesson 8, Topic D
вЂў Managed vs. unmanaged
Lesson 8, Topic D
вЂў Interface conп¬Ѓgurations
Lesson 8, Topic B
вЂ” Full duplex
вЂ” Half duplex
вЂ” Port speeds
вЂ” IP addressing
вЂ” MAC п¬Ѓltering
вЂў PoE
Lesson 2, Topic B
вЂў Traffic п¬Ѓltering
Lesson 14, Topic A
вЂў Diagnostics
Lesson 14, Topic A
вЂў VTP conп¬Ѓguration
Lesson 8, Topic D
вЂў QoS
Lesson 14, Topic C
вЂў Port mirroring
Lesson 3, Topic D
2.2 Given a scenario, install and conп¬Ѓgure a wireless network.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў WAP placement
Lesson 3, Topic B
вЂў Antenna types
Lesson 4, Topic B
вЂў Interference
Lesson
Lesson
Lesson
Lesson
вЂў Frequencies
Lesson 4, Topic B
вЂў Channels
Lesson 4, Topic B
вЂў Wireless standards
Lesson 4, Topic B
вЂў SSID (enable/disable)
Lesson 3, Topic B
вЂў Compatibility (802.11 a/b/g/n)
Lesson 4, Topic B
3, Topics B and C
4, Topic B
13, Topic A
15, Topic D
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
557
APPENDIX A
2.3 Explain the purpose and properties of DHCP.
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
Exam Objective
вЂў
вЂў
вЂў
вЂў
вЂў
Static vs. dynamic IP addressing
Reservations
Scopes
Leases
Options (DNS servers, suffixes)
Lesson 7, Topic A
2.4 Given a scenario, troubleshoot common wireless problems.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Interference
Lesson 3, Topic B
Lesson 4, Topic B
Lesson 15, Topic D
вЂў Signal strength
Lesson 15, Topic D
вЂў Conп¬Ѓgurations
Lesson 15, Topic D
вЂў Incompatibilities
Lesson 15, Topic D
вЂў Incorrect channel
Lesson 15, Topic D
вЂў Latency
Lesson 9, Topic C
вЂў Encryption type
Lesson 15, Topic D
вЂў Bounce
Lesson 15, Topic D
вЂў SSID mismatch
Lesson 3, Topic B
Lesson 15, Topic D
вЂў Incorrect switch placement
Lesson 15, Topic D
2.5 Given a scenario, troubleshoot common router and switch problems.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Switching loop
Lesson 15, Topic D
вЂў Bad cables/improper cable types
Lesson 15, Topic D
вЂў Port conп¬Ѓguration
Lesson 15, Topic D
вЂў VLAN assignment
Lesson 15, Topic D
вЂў Mismatched MTU/MUT black hole
Lesson 15, Topic D
вЂў Power failure
Lesson 3, Topic D
CompTIAВ® Network+В® (Exam N10-005)
558
Copyright В© Element K Corporation
APPENDIX A
2.5 Given a scenario, troubleshoot common router and switch problems.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Bad/missing routes
Lesson 15, Topic D
вЂў Bad modules (SFPs, GBICs)
Lesson 15, Topic D
вЂў Wrong subnet mask
Lesson 15, Topic D
вЂў Wrong gateway
Lesson 15, Topic D
вЂў Duplicate IP address
Lesson 15, Topic D
вЂў Wrong DNS
Lesson 15, Topic D
2.6 Given a set of requirements, plan and implement a basic SOHO network.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў List of requirements
Lesson 8, Topic E
вЂў Cable length
Lesson 8, Topic E
вЂў Device types/requirements
Lesson 8, Topic E
вЂў Environment limitations
Lesson 8, Topic E
вЂў Equipment limitations
Lesson 8, Topic E
вЂў Compatibility requirements
Lesson 8, Topic E
3.0 Network Media and Topologies
3.1 Categorize standard media types and associated properties.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Fiber:
вЂ” Multimode
вЂ” Singlemode
Lesson 3, Topic A
вЂў Copper:
вЂ” UTP
Lesson 3, Topic A
вЂ” STP
Lesson 3, Topic A
вЂ” CAT3
Lesson 3, Topic A
вЂ” CAT5
Lesson 3, Topic A
вЂ” CAT5e
Lesson 3, Topic A
вЂ” CAT6
Lesson 3, Topic A
вЂ” CAT6a
Lesson 3, Topic A
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
559
APPENDIX A
3.0 Network Media and Topologies
3.1 Categorize standard media types and associated properties.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂ” Coaxial
Lesson 3, Topic A
вЂ” Crossover
Lesson 15, Topic C
вЂ” T1 Crossover
Lesson 15, Topic C
вЂ” Straight-through
Lesson 15, Topic C
вЂў Plenum vs. non-plenum
Lesson 3, Topic A
вЂў Media converters:
Lesson 3, Topic A
вЂ” Singlemode п¬Ѓber to Ethernet
вЂ” Multimode п¬Ѓber to Ethernet
Lesson 3, Topic A
вЂ” Fiber to Coaxial
Lesson 3, Topic A
вЂ” Singlemode to multimode п¬Ѓber
Lesson 3, Topic A
вЂў Distance limitations and speed limitations
Lesson 3, Topic A
вЂў Broadband over powerline
Lesson 2, Topic A
3.2 Categorize standard connector types based on network media.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
Lesson 3, Topic A
вЂў Fiber:
вЂ” ST
вЂ” SC
вЂ” LC
вЂ” MTRJ
вЂў Copper:
вЂ” RJ-45
Lesson 3, Topic A
вЂ” RJ-11
Lesson 3, Topic A
вЂ” BNC
Lesson 3, Topic A
вЂ” F-connector
Lesson 3, Topic A
вЂ” DB-9 (RS-232)
Lesson 3, Topic D
вЂ” Patch panel
Lesson 3, Topic A
вЂ” 110 block (T568A, T568B)
Lesson 15, Topic C
CompTIAВ® Network+В® (Exam N10-005)
560
Copyright В© Element K Corporation
APPENDIX A
3.3 Compare and contrast different wireless standards.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў 802.11 a/b/g/n standards
Lesson 4, Topic B
вЂ” Distance
Lesson 4, Topic B
вЂ” Speed
Lesson 4, Topic B
вЂ” Latency
Lesson 4, Topic B
вЂ” Frequency
Lesson 4, Topic B
вЂ” Channels
Lesson 4, Topic B
вЂ” MIMO
Lesson 4, Topic B
вЂ” Channel bonding
Lesson 3, Topic D
3.4 Categorize WAN technology types and properties.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў Types:
вЂ” T1/E1
Lesson 9, Topic A
вЂ” T3/E3
Lesson 9, Topic A
вЂ” DS3
Lesson 9, Topic A
вЂ” OCx
Lesson 9, Topic A
вЂ” SONET
Lesson 9, Topic A
вЂ” SDH
Lesson 9, Topic A
вЂ” DWDM
Lesson 9, Topic A
вЂ” Satellite
Lesson 9, Topic A
вЂ” ISDN
Lesson 9, Topic A
вЂ” Cable
Lesson 9, Topic B
вЂ” DSL
Lesson 9, Topic A
вЂ” Cellular
Lesson 3, Topic B
Lesson 9, Topic A
вЂ” WiMAX
Lesson 9, Topic A
вЂ” LTE
Lesson 9, Topic A
вЂ” HSPA+
Lesson 9, Topic A
вЂ” Fiber
Lesson 3, Topic A
вЂ” Dialup
Lesson 9, Topic B
вЂ” PON
Lesson 9, Topic A
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
561
APPENDIX A
3.4 Categorize WAN technology types and properties.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂ” Frame relay
Lesson 9, Topic A
вЂ” ATMs
Lesson 9, Topic A
вЂў Properties:
вЂ” Circuit switch
Lesson 8, Topic A
вЂ” Packet switch
Lesson 8, Topic A
вЂ” Speed
Lesson 9, Topic A
вЂ” Transmission media
Lesson 9, Topics A and B
вЂ” Distance
Lesson 9, Topics A and B
3.5 Describe different network topologies.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў MPLS
Lesson 9, Topic A
вЂў Point to point
Lesson 1, Topic D
вЂў Point to multipoint
Lesson 1, Topic D
вЂў Ring
Lesson 1, Topics D and E
вЂў Star
Lesson 1, Topics D and E
вЂў Mesh
Lesson 1, Topic D
вЂў Bus
Lesson 1, Topics D and E
вЂў Peer-to-peer
Lesson 1, Topic C
вЂў Client-server
Lesson 1, Topic C
вЂў Hybrid
Lesson 1, Topic D
3.6 Given a scenario, troubleshoot common physical connectivity problems.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Cable problems:
вЂ” Bad connectors
Lesson 15, Topic D
вЂ” Bad wiring
Lesson 15, Topic D
вЂ” Open, short
Lesson 15, Topic D
вЂ” Split cables
Lesson 15, Topic D
CompTIAВ® Network+В® (Exam N10-005)
562
Copyright В© Element K Corporation
APPENDIX A
3.6 Given a scenario, troubleshoot common physical connectivity problems.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂ” DB loss
Lesson 15, Topic D
вЂ” TXRX reversed
Lesson 15, Topic D
вЂ” Cable placement
Lesson 15, Topic D
вЂ” EMI/Interference
Lesson 15, Topic D
вЂ” Distance
Lesson 15, Topic D
вЂ” Cross-talk
Lesson 15, Topic D
3.7 Compare and contrast different LAN technologies.
Exam Objective
вЂў Types:
вЂ” Ethernet
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
Lesson 4, Topic A
вЂ” 10BaseT
вЂ” 100BaseT
вЂ” 1000BaseT
вЂ” 100BaseTX
вЂ” 100BaseFX
вЂ” 1000BaseX
вЂ” 10GBaseSR
вЂ” 10GBaseLR
вЂ” 10GBaseER
вЂ” 10GBaseSW
вЂ” 10GBaseLW
вЂ” 10GBaseEW
вЂ” 10GBaseT
вЂў Properties:
вЂ” CSMA/CD
Lesson 2, Topic B
вЂ” CSMA/CA
Lesson 2, Topic B
вЂ” Broadcast
Lesson 2, Topic A
вЂ” Collision
Lesson 1, Topic D
Lesson 2, Topic B
вЂ” Bonding
Lesson 3, Topic D
вЂ” Speed
Lesson 4, Topic A
вЂ” Distance
Lesson 4, Topic A
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
563
APPENDIX A
3.8 Identify components of wiring distribution.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў IDF
Lesson 3, Topic A
вЂў MDF
Lesson 3, Topic A
вЂў Demarc
Lesson 14, Topic B
Lesson 15, Topic C
вЂў Demarc extension
Lesson 15, Topic C
вЂў Smart jack
Lesson 15, Topic C
вЂў CSU/DSU
Lesson 9, Topic A
4.0 Network Management
4.1 Explain the purpose and features of various network appliances.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Load balancer
Lesson 14, Topic C
вЂў Proxy server
Lesson 12, Topic A
вЂў Content п¬Ѓlter
Lesson 12, Topic A
вЂў VPN concentrator
Lesson 10, Topic C
4.2 Given a scenario, use appropriate hardware tools to troubleshoot connectivity issues.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Cable tester
Lesson 15, Topic C
вЂў Cable certiп¬Ѓer
Lesson 15, Topic C
вЂў Crimper
Lesson 15, Topic C
вЂў Butt set
Lesson 15, Topic C
вЂў Toner probe
Lesson 15, Topic C
вЂў Punch down tool
Lesson 15, Topic C
вЂў Protocol analyzer
Lesson 14, Topic A
вЂў Loop back plug
Lesson 15, Topic C
вЂў TDR
Lesson 15, Topic C
вЂў OTDR
Lesson 15, Topic C
вЂў Multimeter
Lesson 15, Topic C
CompTIAВ® Network+В® (Exam N10-005)
564
Copyright В© Element K Corporation
APPENDIX A
4.2 Given a scenario, use appropriate hardware tools to troubleshoot connectivity issues.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Environmental monitor
Lesson 15, Topic C
4.3 Given a scenario, use appropriate software tools to troubleshoot connectivity issues.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Protocol analyzer
Lesson 14, Topic A
вЂў Throughput testers
Lesson 14, Topic A
вЂў Connectivity software
Lesson 14, Topic A
вЂў Ping
Lesson 7, Topic C
Lesson 15, Topic B
вЂў Tracert/traceroute
Lesson 7, Topic C
Lesson 15, Topic B
вЂў Dig
Lesson 15, Topic B
вЂў Ipconп¬Ѓg/ifconп¬Ѓg
Lesson 7, Topic A
Lesson 15, Topic B
вЂў Nslookup
Lesson 15, Topic B
вЂў Arp
Lesson 15, Topic B
вЂў Nbtstat
Lesson 15, Topic B
вЂў Netstat
Lesson 15, Topic B
вЂў Route
Lesson 8, Topic B
4.4 Given a scenario, use the appropriate network monitoring resource to analyze trafп¬Ѓc.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў SNMP
Lesson 14, Topic A
вЂў SNMPv2
Lesson 14, Topic A
вЂў SNMPv3
Lesson 14, Topic A
вЂў Syslog
Lesson 14, Topic A
вЂў System logs
Lesson 14, Topic A
вЂў History logs
Lesson 14, Topic A
вЂў General logs
Lesson 14, Topic A
вЂў Traffic analysis
Lesson 14, Topic A
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
565
APPENDIX A
4.4 Given a scenario, use the appropriate network monitoring resource to analyze trafп¬Ѓc.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
Lesson 15, Topic C
вЂў Network sniffer
4.5 Describe the purpose of conп¬Ѓguration management documentation.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Wire schemes
Lesson 14, Topic B
вЂў Network maps
Lesson 14, Topic B
вЂў Documentation
Lesson 14, Topic B
вЂў Cable management
Lesson 14, Topic B
вЂў Asset management
Lesson 14, Topic B
вЂў Baselines
Lesson 14, Topic B
вЂў Change management
Lesson 13, Topic D
4.6 Explain different methods and rationales for network performance optimization.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
Lesson 14, Topic C
вЂў Methods:
вЂ” QoS
вЂ” Traffic shaping
Lesson 14, Topic C
вЂ” Load balancing
Lesson 14, Topic C
вЂ” High availability
Lesson 14, Topic C
вЂ” Caching engines
Lesson 14, Topic C
вЂ” Fault tolerance
Lesson 14, Topic D
вЂ” CARP
Lesson 8, Topic C
вЂў Reasons:
Lesson 14, Topic C
вЂ” Latency sensitivity
вЂ” High bandwidth applications (VoIP, video applications, uniп¬Ѓed communications)
Lesson 9, Topic C
вЂ” Uptime
Lesson 14, Topic C
CompTIAВ® Network+В® (Exam N10-005)
566
Copyright В© Element K Corporation
APPENDIX A
5.0 Network Security
5.1 Given a scenario, implement appropriate wireless security measures.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Encryption protocols:
вЂ” WEP
Lesson 11, Topic D
вЂ” WPA2
Lesson 11, Topic D
вЂ” WPA Enterprise
Lesson 11, Topic D
вЂў MAC address п¬Ѓltering
Lesson 14, Topic A
вЂў Device placement
Lesson 3, Topic B
вЂў Signal strength
Lesson 3, Topic B
5.2 Explain the methods of network access security.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў ACL:
Lesson 12, Topic A
вЂ” MAC п¬Ѓltering
Lesson 14, Topic A
вЂ” IP п¬Ѓltering
Lesson 12, Topic A
вЂ” Port п¬Ѓltering
Lesson 14, Topic A
вЂў Tunneling and encryption:
Lesson 10, Topic C
вЂ” SSL VPN
Lesson 10, Topic C
вЂ” VPN
Lesson 10, Topic C
вЂ” L2TP
Lesson 10, Topic D
вЂ” PPTP
Lesson 10, Topic D
вЂ” IPSec
Lesson 12, Topic C
вЂ” ISAKMP
Lesson 12, Topic C
вЂ” TLS
Lesson 11, Topic D
вЂ” TLS1.2
Lesson 11, Topic D
вЂ” Site-to-site and client-to-site
Lesson 10, Topic C
вЂў Remote access:
вЂ” RAS
Lesson 10, Topic A
вЂ” RDP
Lesson 10, Topic A
вЂ” PPPoE
Lesson 10, Topic B
вЂ” PPP
Lesson 10, Topic B
вЂ” ICA
Lesson 10, Topic A
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
567
APPENDIX A
5.2 Explain the methods of network access security.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂ” SSH
Lesson 7, Topic E
5.3 Explain methods of user authentication.
Exam Objective
Network+ Certiп¬Ѓcation Lesson and Topic
Reference
вЂў PKI
Lesson 11, Topic D
вЂў Kerberos
Lesson 11, Topic C
вЂў AAA (RADIUS, TACACS+)
Lesson 10, Topics A and D
вЂў Network access control (802.1x, posture assessment)
Lesson 11, Topic C
Lesson 12, Topic A
вЂў CHAP
Lesson 10, Topic D
вЂў MS-CHAP
Lesson 10, Topic B
вЂў EAP
Lesson 11, Topic C
вЂў Two-factor authentication
Lesson 11, Topic C
вЂў Multifactor authentication
Lesson 11, Topic C
вЂў Single sign-on
Lesson 11, Topic C
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Wireless:
вЂ” War driving
Lesson 13, Topic A
вЂ” War chalking
Lesson 13, Topic A
вЂ” WEP cracking
Lesson 13, Topic A
вЂ” WPA cracking
Lesson 13, Topic A
вЂ” Evil twin
Lesson 13, Topic A
вЂ” Rogue access point
Lesson 13, Topic A
вЂў Attacks:
вЂ” DoS
Lesson 13, Topic B
вЂ” DDoS
Lesson 13, Topic B
вЂ” Man in the middle
Lesson 13, Topic B
вЂ” Social engineering
Lesson 13, Topic A
CompTIAВ® Network+В® (Exam N10-005)
568
Copyright В© Element K Corporation
APPENDIX A
5.4 Explain common threats, vulnerabilities, and mitigation techniques.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂ” Virus
Lesson 13, Topic A
вЂ” Worms
Lesson 13, Topic A
вЂ” Buffer overп¬‚ow
Lesson 13, Topic A
вЂ” Packet sniffing
Lesson 13, Topic A
вЂ” FTP bounce
Lesson 13, Topic B
вЂ” Smurf
Lesson 13, Topic B
вЂў Mitigation techniques:
Lesson 13, Topic D
вЂ” Training and awareness
вЂ” Patch management
Lesson 13, Topic C
вЂ” Policies and procedures
Lesson 13, Topic D
вЂ” Incident response
Lesson 13, Topic D
5.5 Given a scenario, install and conп¬Ѓgure a basic п¬Ѓrewall.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў Types:
вЂ” Software and hardware п¬Ѓrewalls
Lesson 12, Topic A
вЂў Port security
Lesson 12, Topic A
вЂў Stateful inspection vs. packet п¬Ѓltering
Lesson 12, Topic A
вЂў Firewall rules:
Lesson 12, Topic A
вЂ” Block/allow
вЂ” Implicit deny
Lesson 12, Topic A
вЂ” ACL
Lesson 12, Topic A
вЂў NAT/PAT
Lesson 12, Topic A
вЂў DMZ
Lesson 12, Topic A
5.6 Categorize different types of network security appliances and methods.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂў IDS and IPS:
вЂ” Behavior based
Lesson 12, Topic B
вЂ” Signature based
Lesson 12, Topic B
Appendix A: Mapping Network+ Course Content to the CompTIA Network+ Exam Objectives
Copyright В© Element K Corporation
569
APPENDIX A
5.6 Categorize different types of network security appliances and methods.
Network+ Certiп¬Ѓcation Lesson and Topic
Exam Objective
Reference
вЂ” Network based
Lesson 12, Topic B
вЂ” Host based
Lesson 12, Topic B
вЂў Vulnerability scanners:
вЂ” NESSUS
Lesson 12, Topic B
вЂ” NMAP
Lesson 12, Topic B
вЂў Methods:
вЂ” Honeypots
Lesson 12, Topic B
вЂ” Honeypots
Lesson 12, Topic B
CompTIAВ® Network+В® (Exam N10-005)
570
Copyright В© Element K Corporation
APPENDIX B
APPENDIX B
CompTIA Network+ Acronyms
The following is a list of acronyms that appear on the CompTIA Network+ certiп¬Ѓcation exam
(N10-005) objectives. Candidates are encouraged to review the complete list and attain a working knowledge of all listed acronyms as a part of a comprehensive exam preparation program.
Acronym
Associated Term
AAA
Authentication Authorization and Accounting
ACL
Access Control List
ADSL
Asymmetric Digital Subscriber Line
AES
Advanced Encryption Standard
AH
Authentication Header
AM
Amplitude Modulation
AMI
Alternate Mark Inversion
APIPA
Automatic Private Internet Protocol Addressing
ARIN
American Registry for Internet Numbers
ARP
Address Resolution Protocol
ASP
Application Service Provider
ATM
Asynchronous Transfer Mode
BERT
Bit-Error Rate Test
BGP
Border Gateway Protocol
BNC
British Naval Connector / Bayonet Niell-Concelman
BootP
Boot Protocol /Bootstrap Protocol
BPDU
Bridge Protocol Data Unit
BRI
Basic Rate Interface
CARP
Common Address Redundancy Protocol
CHAP
Challenge Handshake Authentication Protocol
CIDR
Classless inter domain routing
CNAME
Canonical Name
CRAM-MD5
Challenge-Response Authentication Mechanism вЂ“ Message Digest 5
Appendix B: CompTIA Network+ Acronyms
571
Copyright В© Element K Corporation
APPENDIX B
Acronym
Associated Term
CSMA / CA
Carrier Sense Multiple Access / Collision Avoidance
CSMA / CD
Carrier Sense Multiple Access / Collision Detection
CSU
Channel Service Unit
dB
decibels
DHCP
Dynamic Host Conп¬Ѓguration Protocol
DLC
Data Link Control
DMZ
Demilitarized Zone
DNS
Domain Name Service / Domain Name Server / Domain Name System
DOCSIS
Data-Over-Cable Service Interface Speciп¬Ѓcation
DoS
Denial of Service
DDoS
Distributed Denial of Service
DSL
Digital Subscriber Line
DSU
Data Service Unit
DWDM
Dense Wavelength Division Multiplexing
E1
E-Carrier Level 1
EAP
Extensible Authentication Protocol
EDNS
Extension Mechanisms for DNS
EGP
Exterior Gateway Protocol
EIGRP
Enhanced Interior Gateway Routing Protocol
EMI
Electromagnetic Interference
ESD
Electrostatic Discharge
ESSID
Enhanced Service Set Identiп¬Ѓer
ESP
Encapsulated security packets
FDDI
Fiber Distributed Data Interface
FDM
Frequency Division Multiplexing
FHSS
Frequency Hopping Spread Spectrum
FM
Frequency Modulation
FQDN
Fully Qualiп¬Ѓed Domain Name / Fully Qualiп¬Ѓed Distinguished Name
FTP
File Transfer Protocol
GBIC
Gigabit Interface Converter
Gbps
Gigabits per second
HDLC
High-Level Data Link Control
HSRP
Hot Standby Router Protocol
HTTP
Hypertext Transfer Protocol
HTTPS
Hypertext Transfer Protocol Secure
Hz
Hertz
IANA
Internet Assigned Numbers Authority
ICA
Independent Computer Architecture
ICANN
Internet Corporation for Assigned Names and Numbers
ICMP
Internet Control Message Protocol
CompTIAВ® Network+В® (Exam N10-005)
572
Copyright В© Element K Corporation
APPENDIX B
Acronym
Associated Term
IDF
Intermediate Distribution Frame
IDS
Intrusion Detection System
IEEE
Institute of Electrical and Electronics Engineers
IGMP
Internet Group Multicast Protocol
IGP
Interior Gateway Protocol
IIS
Internet Information Services
IKE
Internet Key Exchange
IMAP4
Internet Message Access Protocol version 4
InterNIC
Internet Network Information Center
IP
Internet Protocol
IPS
Intrusion Prevention System
IPsec
Internet Protocol Security
IPv4
Internet Protocol version 4
IPv6
Internet Protocol version 6
ISAKMP
Internet Security Association and Key Management Protocol
ISDN
Integrated Services Digital Network
ISP
Internet Service Provider
IT
Information Technology
Kbps
Kilobits per second
L2F
Layer 2 Forwarding
L2TP
Layer 2 Tunneling Protocol
LACP
Link aggregation control protocol
LAN
Local Area Network
LC
Local Connector
LDAP
Lightweight Directory Access Protocol
LEC
Local Exchange Carrier
LED
Light Emitting Diode
LLC
Logical Link Control
MAC
Media Access Control / Medium Access Control
Mbps
Megabits per second
MBps
Megabytes per second
MDF
Main Distribution Frame
MDI
Media Dependent Interface
MDIX
Media Dependent Interface Crossover
MIB
Management Information Base
MMF
Multimode Fiber
MPLS
Multi-Protocol Label Switching
MS-CHAP
Microsoft Challenge Handshake Authentication Protocol
MT-RJ
Mechanical Transfer-Registered Jack
MX
Mail Exchanger
Appendix B: CompTIA Network+ Acronyms
573
Copyright В© Element K Corporation
APPENDIX B
Acronym
Associated Term
NAC
Network Access Control
NaaS
Network as a Service
NAS
Network Attached Storage
NAT
Network Address Translation
NCP
Network Control Protocol
NetBEUI
Network Basic Input / Output Extended User Interface
NetBIOS
Network Basic Input / Output System
NFS
Network File Service
NIC
Network Interface Card
NIPS
Network Intrusion Prevention System
nm
nanometer
NNTP
Network News Transport Protocol
NTP
Network Time Protocol
OCx
Optical Carrier
OS
Operating Systems
OSI
Open Systems Interconnect
OSPF
Open Shortest Path First
OTDR
Optical Time Domain Reп¬‚ectometer
PAP
Password Authentication Protocol
PAT
Port Address Translation
PC
Personal Computer
PGP
Pretty Good Privacy
PKI
Public Key Infrastructure
PoE
Power over Ethernet
POP3
Post Office Protocol version 3
POTS
Plain Old Telephone System
PPP
Point-to-Point Protocol
PPPoE
Point-to-Point Protocol over Ethernet
PPTP
Point-to-Point Tunneling Protocol
PRI
Primary Rate Interface
PSTN
Public Switched Telephone Network
PVC
Permanent Virtual Circuit
QoS
Quality of Service
RADIUS
Remote Authentication Dial-In User Service
RARP
Reverse Address Resolution Protocol
RAS
Remote Access Service
RDP
Remote Desktop Protocol
RFI
Radio Frequency Interface
RG
Radio Guide
RIP
Routing Internet Protocol
CompTIAВ® Network+В® (Exam N10-005)
574
Copyright В© Element K Corporation
APPENDIX B
Acronym
Associated Term
RJ
Registered Jack
RSA
Rivest, Shamir, Adelman
RSH
Remote Shell
RTP
Real Time Protocol
RTSP
Real Time Streaming Protocol
RTT
Round Trip Time or Real Transfer Time
SA
Security Association
SC
Standard Connector / Subscriber Connector
SCP
Secure Copy Protocol
SDSL
Symmetrical Digital Subscriber Line
SFTP
Secure File Transfer Protocol
SFP
Small Form-factor Pluggable
SIP
Session Initiation Protocol
SLIP
Serial Line Internet Protocol
SMF
Single Mode Fiber
SMTP
Simple Mail Transfer Protocol
SNAT
Static Network Address Translation
SNMP
Simple Network Management Protocol
SOA
Start of Authority
SOHO
Small Office / Home Office
SONET
Synchronous Optical Network
SPS
Standby Power Supply
SSH
Secure Shell
SSID
Service Set Identiп¬Ѓer
SSL
Secure Sockets Layer
ST
Straight Tip or Snap Twist
STP
Shielded Twisted Pair
T1
T-Carrier Level 1
TA
Terminal Adaptor
TACACS+
Terminal Access Control Access Control System+
TCP
Transmission Control Protocol
TCP / IP
Transmission Control Protocol / Internet Protocol
TDM
Time Division Multiplexing
TDR
Time Domain Reп¬‚ectometer
Telco
Telephone Company
TFTP
Trivial File Transfer Protocol
TKIP
Temporal Key Integrity Protocol
TLS
Transport Layer Security
TTL
Time to Live
UDP
User Datagram Protocol
Appendix B: CompTIA Network+ Acronyms
575
Copyright В© Element K Corporation
APPENDIX B
Acronym
Associated Term
UNC
Universal Naming Convention
UPS
Uninterruptible Power Supply
URL
Uniform Resource Locator
USB
Universal Serial Bus
UTP
Unshielded Twisted Pair
VDSL
Variable Digital Subscriber Line
VLAN
Virtual Local Area Network
VNC
Virtual Network Connection
VoIP
Voice over IP
VPN
Virtual Private Network
VTP
Virtual Trunk Protocol
WAN
Wide Area Network
WAP
Wireless Application Protocol / Wireless Access Point
WEP
Wired Equivalent Privacy
WINS
Window Internet Name Service
WPA
Wi-Fi Protected Access
www
World Wide Web
X.25
CCITT Packet Switching Protocol
XML
eXtensible Markup Language
XDSL
Extended Digital Subscriber Line
Zeroconf
Zero Conп¬Ѓguration
CompTIAВ® Network+В® (Exam N10-005)
576
Copyright В© Element K Corporation
APPENDIX C
APPENDIX C
Network Fault Tolerance
Methods
TOPIC A
Network Fault Tolerance Methods
You have monitored the performance of your network and optimized it to meet the needs of
users. Apart from network performance management, fault management will be an important
part of managing your network. In this topic, you will identify tools and technologies used to
implement fault tolerance in networks.
Fault tolerance planning is intended to prevent the negative impact of mishaps that you can
reasonably foresee, such as a temporary power outage or the inevitable failure of a hard disk.
With proper fault tolerance measures in place, you will keep these minor occurrences from
affecting the network in your organization.
RAID
Deп¬Ѓnition:
The Redundant Array of Independent Disks (RAID) standards are a set of vendorindependent speciп¬Ѓcations for fault-tolerant conп¬Ѓgurations on multiple-disk systems. If
one or more of the disks fails, data can be recovered from the remaining disks. In
RAID, the central control unit provides additional functionality so that the individual
disks can be utilized to achieve higher fault-tolerance and performance. The disks
appear as a single storage unit to the devices to which they are connected.
The original RAID speciп¬Ѓcations were titled Redundant Array of Inexpensive Disks. As the disk cost of
RAID implementations has become less of a factor, the term вЂњIndependentвЂќ disks has been widely
adopted instead.
Appendix C: Network Fault Tolerance Methods
577
Copyright В© Element K Corporation
APPENDIX C
Example:
Figure C-1: Fault-tolerant configurations on multiple-disk systems.
Disk system
A disk system consists of physical storage disks kept side-by-side. It has a central unit
that manages all the input and output and simpliп¬Ѓes the integration with other devices
such as other disk systems and servers. Disk systems are usually used for online storage due to their superior performance.
Non-RAID Disk Fault Tolerance Features
RAID systems are the primary means of providing disk fault tolerance. There are other fault
tolerance methods that you might encounter on your network.
Fault Tolerance
Method
Description
Sector sparing
A system in which every time the operating system reads or writes data to the
disk, it checks the integrity of the sectors to which the data is being written. If
a problem is detected, the data is moved to another sector and the problem
sector is marked as bad. Bad sectors will not be reused.
Read-after-write veriп¬Ѓcation
After a block of data is written to a hard disk or database, it is read back from
the destination and compared to the original data in memory. If, after several
attempts, data read from the destination does not match the data in memory,
the software stores the data in a block in a temporary area, marks the bad area
so that it will not be used again, and attempts to write the data to a new location.
TTSs
Transaction Tracking Systems (TTSs) monitor write and change processes that
occur in a system to ensure successful completion, providing the ability to
back out of transactions, such as changes in a database п¬Ѓle, that have been
interrupted by the failure of a component.
For example, in a banking system, if power is interrupted after funds are
deducted from a customerвЂ™s savings account but before they are credited to the
customerвЂ™s checking account, the system will roll back the transaction to the
original savings account balance.
CompTIAВ® Network+В® (Exam N10-005)
578
Copyright В© Element K Corporation
APPENDIX C
Link Redundancy
Deп¬Ѓnition:
Link redundancy is a network fault-tolerance method that provides alternative connections that can function even if a critical primary connection is interrupted. The
duplicate link can be fully redundant and provide the same level of performance, service, and bandwidth as the primary link. Alternatively, the redundant link can be a
broadband connection to provide basic connectivity until the main link is restored.
Example: Link Redundancy in a Small Office
For a small office, a fully fault-tolerant network might be too expensive, but a backup
dial-in connection might be a reasonable and cost-effective precaution. Some broadband routers include a serial port where you can attach an external modem so that you
can create a dial-up connection when a DSL or cable connection fails.
Planning for Link Redundancy
Not all network links must be made redundant. Each company must evaluate how critical each of its LAN and WAN links is to ongoing operations, and weigh the impact of
losing connectivity for a given period of time against the cost of maintaining a redundant link.
How to Create an Enterprise Fault Tolerance Plan
A well-deп¬Ѓned enterprise-wide fault tolerance plan adequately balances the need for service
continuity against the cost of implementing fault tolerance measures to meet critical business
requirements.
Guidelines:
To implement enterprise fault tolerance, follow these guidelines:
вЂў
Identify network devices and servers that need to be protected from power surges
and outages, and implement UPS power protection.
вЂў
Identify critical data sources and implement appropriate disk fault tolerance measures.
вЂў
Design and implement a backup plan.
вЂў
Identify critical network services and implement redundant servers to provide
DHCP, name resolution, and authentication service continuity.
вЂў
Analyze your need for redundant network links. Implement redundant WAN links
only where needed and justiп¬Ѓed by cost.
For internal routers, consider implementing dynamic routing over a mesh topology
that provides multiple paths through the internal network.
вЂў
Identify the need for redundant hot spare and cold spare devices, and purchase
and conп¬Ѓgure the required devices.
Example:
Our Global CompanyвЂ™s Technology Services division is developing a fault tolerance
plan. They assess their needs to protect against power failures, data loss, and network
downtime and decide to implement several fault tolerance measures:
вЂў
All critical servers, routers, and other infrastructure equipment will be protected
with UPS devices. User workstations will also have power backup.
Appendix C: Network Fault Tolerance Methods
579
Copyright В© Element K Corporation
APPENDIX C
вЂў
Critical databases containing sensitive company data or mission-critical п¬Ѓles
should be deployed in RAID conп¬Ѓgurations using a standard backup rotation
method; the backup tapes must be stored offsite and rotated back to the office as
needed for reuse.
вЂў
A supply of spare parts for routers, disks, and other critical hardware elements is
maintained so that critical infrastructure devices can be swapped as needed. However, as some user downtime is acceptable there is no need to maintain a
redundant inventory of laptop and desktop systems for user-level tasks.
вЂў
There are four internal routers to provide enough links to create a redundant mesh
topology.
вЂў
The company leases a single T3 WAN link. To maintain minimal network connectivity if this line goes down, they negotiate with their service provider to make a
T1 connection available as needed.
CompTIAВ® Network+В® (Exam N10-005)
580
Copyright В© Element K Corporation
APPENDIX D
APPENDIX D
Disaster Recovery Planning
TOPIC A
Disaster Recovery Planning
In this lesson, you have learned different aspects of network management such as network
monitoring, conп¬Ѓguration management, performance optimization, and fault tolerance. Another
important aspect of managing your network is to be prepared for any extenuating situations
that could affect your network and potentially disrupt it. A disaster recovery plan ensures that
you have adequate recovery measures in place for your network so that you are prepared for a
disaster when it occurs. In this topic, you will identify the components of a network disaster
recovery plan.
Networks are vulnerable to a multitude of threatsвЂ”not only from hackers and disgruntled
employees, but also from natural disasters and plain, old-fashioned decay. Insurance can
replace hardware and administrators can rebuild the network, but lost data is gone for good,
and many companies cannot survive that. Having a solid disaster recovery plan in place will
help ensure that your organization recovers efficiently from any type of disaster.
Disaster Recovery
Deп¬Ѓnition:
A disaster is a catastrophic loss of system functioning due to a cause that cannot reasonably be prevented. Disasters can affect personnel, buildings, devices,
communications, resources, and data. Disaster recovery is the administrative function
of protecting people and resources while restoring a failed network or systems as
quickly as possible. The п¬Ѓrst priority is to ensure the safety of personnel, and then to
ensure continuity of business functions.
Appendix D: Disaster Recovery Planning
581
Copyright В© Element K Corporation
APPENDIX D
Example:
Figure D-1: Disasters and disaster recovery.
Disaster Categories
Disasters that can affect network functioning fall into one of three main categories.
Disaster Category
Description
Natural
Disaster
Natural disasters include п¬Ѓres, storms, п¬‚oods, and other destructive forces.
Natural disasters involve the involuntary destruction of network hardware. Data
loss is usually related to destruction of network infrastructure and hardware.
The best defense against this type of disaster is excellent documentation and
physical security for data backups. In the worst-case scenario, nothing remains
of the office after the disaster, and the network has to be completely rebuilt
from documentation alone.
Data Destruction
Data loss due to causes other than natural disaster can be easier to recover
from. This kind of data loss includes accidental deletion, malicious destruction,
or a virus attack. Again, the key is a good quality data backup.
Equipment
Failure
Most day-to-day network disasters relate to failure of network hardware. Not
only can hardware failure cause a loss of data, but it can also cause a loss of
productivity in the office. Defense against equipment failure can be as simple
as having a relationship with a vendor who can get replacement parts quickly
or contracting a service provider that stocks parts. Many companies keep highrisk spares on hand in order to quickly replace failures.
One major mistake that many administrators make is to standardize uncommon
hardware or rely too heavily on older hardware that might be hard to replace.
If a network goes down because older equipment fails, it could be down for an
unacceptable length of time while a replacement is found or the network is
reconп¬Ѓgured.
CompTIAВ® Network+В® (Exam N10-005)
582
Copyright В© Element K Corporation
APPENDIX D
Disaster Recovery Plans
A disaster recovery plan is a policy and set of procedures that document how people and
resources will be protected in case of disaster, and how the organization will recover from the
disaster and restore normal functioning. The plan should be developed and implemented cooperatively among and between different functional groups.
Figure D-2: A policy and set of procedures that document how people and resources
will be protected in case of disaster.
The disaster recovery plan incorporates many components, including:
вЂў
A complete list of responsible individuals.
вЂў
A critical hardware and software inventory.
вЂў
Detailed instructions on how to reconstruct the network.
A complete disaster recovery plan will be highly detailed and completely customized to suit the needs and circumstances of a particular organization. This section provides only a broad overview of the components and
considerations involved in constructing a recovery plan.
Group Roles in Plan Development
The network administrator has the biggest responsibility for drafting, testing, and documenting the plan. Corporate managers and administrators should contribute to the plan
and should fully understand their role in implementing the plan, if needed. Vendors
and regular contractors should understand their responsibilities and what service levels
they will guarantee.
The Network Reconstruction Plan
The network reconstruction plan provides the steps to reconstruct the network.
Appendix D: Disaster Recovery Planning
583
Copyright В© Element K Corporation
APPENDIX D
Plan Component
Description
Network documentation
Physical and logical network diagrams will enable networking staff to begin to
reconstruct the network with minimal downtime. An administratorвЂ™s access
credentials need to be documented so that the system is accessible after the
restore. Decryption or recovery agents and digital certiп¬Ѓcates need to be documented as well. In addition, critical hardware and software inventory
documentation will aid in ensuring that you have all the documentation and
information needed to rebuild the network.
Fall-back plan
A fall-back plan is an alternate design that can be implemented temporarily to
enable critical network elements to function. It should include a list of minimum required hardware and software as well as implementation instructions.
Data restoration plan
A data restoration plan details exactly how to retrieve and restore data backups
in the correct sequence.
Documenting Security Information
Many administrators have the valid concern that writing down security information,
such as administrative and service account passwords, provides opportunities for security breaches. However, a network is useless when restored if there is no administrative
access. The security information must be in the recovery documentation, but it can be
stored securely and accessed separately by the appropriate individuals; it certainly
should not be distributed to everyone working on or reviewing the plan.
Hot, Warm, and Cold Sites
Backup site locations and replacement equipment can be classiп¬Ѓed as hot, warm, or cold,
depending on how much conп¬Ѓguration would be necessary to bring the location or spare equipment online.
вЂў
A hot site is a fully conп¬Ѓgured alternate network that can be online quickly after a disaster.
вЂў
A warm site is a business site that performs noncritical functions under normal conditions,
but which can be rapidly converted to a key operations site if needed.
вЂў
A cold site is a predetermined alternate location where a network can be rebuilt in case of
a disaster.
Hot and Cold Spares
A hot spare is a fully conп¬Ѓgured and operational piece of backup equipment that can
be swapped into a system with little to no interruption in functionality. A cold spare is
a duplicate piece of backup equipment that can be conп¬Ѓgured to use as an alternate if
needed.
UPS
Deп¬Ѓnition:
An Uninterruptible Power Supply (UPS) is a device that provides backup power when
the electrical power fails or drops to an unacceptable voltage level. This helps reduce
or eliminate data loss and limit or prevent hardware damage during power surges or
brownouts. UPSs can be online or offline models.
CompTIAВ® Network+В® (Exam N10-005)
584
Copyright В© Element K Corporation
APPENDIX D
Example:
Figure D-3: UPS provides backup power to systems.
Comparing Online and Offline UPSs
With an online UPS, power always п¬‚ows through the UPS to the devices connected to
it. Because it is always actively monitoring power, it provides an added beneп¬Ѓt by
functioning as a line conditioner, reducing or eliminating surges and brownouts to the
attached equipment. Online UPS systems tend to be more expensive than offline systems.
With an offline UPS, the UPS monitors power and activates only when there is a drop,
so there is a very slight delay before the UPS becomes active. However, system power
is not usually lost because the delay is so short. Some operating systems provide UPS
monitoring so that users can be alerted to log off and the operating system can be shut
down properly if there is a power outage.
Specialized Data Backups
Certain data types may require specialized procedures or additional software components to
perform a successful backup.
Specialized Backup
Type
Description
Open п¬Ѓles
Files that are opened by an application are locked to ensure that only one client
makes changes at a time. It is a nice feature, but also one that causes a few
problems for network backup software. Speciп¬Ѓcally, the backup software has to
deal with a client making changes during the backup, which can create errors in
the backup (remember that backups are relatively slow). It also has to deal with
the locked п¬Ѓles. To help, you can deploy an open п¬Ѓles agent with the backup
software. When the backup software encounters a locked п¬Ѓle, it uses the open
п¬Ѓles agent to take a snapshot of the п¬Ѓle. The snapshot temporarily disables the
п¬ЃleвЂ™s ability to be edited and copies the п¬Ѓle to a temporary location on the
drive. The backup software then backs up the snapshot. This happens very
quickly and does not disrupt the client using the п¬Ѓle.
Databases
Databases are essentially big, open п¬Ѓles. Some backup software handles simple
databases with nothing more than an open п¬Ѓles agent. However, larger databases have special considerations. In a database, the actual data on the drive
might not be current because of write-behind caching, a technique that temporarily stores database changes in server memory while the server is busy.
Sometimes, database logs need to be reset when a database is backed up. Log
п¬Ѓles are often stored on a different drive than the database itself. These databases may require either a manual backup procedure to close open п¬Ѓles and
clear logs, or the use of a database agent, which can back up the database and
reset the logs while the database is online.
Appendix D: Disaster Recovery Planning
585
Copyright В© Element K Corporation
APPENDIX D
Specialized Backup
Type
Description
Email
Email servers are essentially modiп¬Ѓed database servers that store usersвЂ™ mailboxes. Data is still in a database data store, which means that the email server
can be backed up just like a database server. In fact, a standard backup and
restore of a mail server contains all the same elements that backing up a database does. When a mail server is backed up, like a database, one restore option
is to restore all the data and then extract the damaged mailbox.
There is another type of mail server backup called the brick-level backup,
which uses a special agent that is aware of the databaseвЂ™s data structure. Bricklevel backups enable a database to be backed up mailbox by mailbox, which
takes longer, and then restored one mailbox at a time. Some agents even enable
the mail to be restored message by message.
Power user workstations
Some power users on your network might have sensitive data on their personal
workstations that you would choose to include in a backup plan. Workstations
are easy to back up when they have an agent installed that enables backup software to access them. However, they have to be powered on to be backed up.
This used to be a problem, but today most network cards and PCs support a
technology called Wake on LAN (WOL), in which backup software sends a
signal to the workstation (awakens it), waits for it to boot up, backs it up, and
then turns it off again.
Remote network back- When remote users are on the network, they are backed up the same way that
ups
workstations are. However, when they are primarily offline, backups require a
different solution. Many backup software manufacturers use a remote agent to
back up remote users when the users connect to the network. The agent copies
changed data from the laptop to a network drive.
This is always a partial backup, so it is faster than copying all the data off the
laptop. But how do you back up remote users if they are not connected to the
network? Some backup software uses over-the-web backups. The process is the
same as already described except that the user attaches to a secure website and
uploads data.
Enterprise backups
Many companies have moved to an enterprise-wide solution for data backups.
A high-performance backup solution is deployed from a central location and all
backup data is stored in the central location. Many of these solutions cross
manufacturersвЂ™ boundaries, enabling one setup to get backups from PC servers,
UNIX mainframes, mid-range servers, and workstations, regardless of manufacturer and operating system.
Snapshot Backups
Snapshots can be used to take complete backups of drives and databases, as
well as to copy open п¬Ѓles. There are a number of different snapshot technologies that are implemented in software, in hardware, or in combinations of the
two. Depending on the technology in use, snapshots might clone an entire copy
of a volume to another physical drive, or they might record only п¬Ѓle changes or
only pointers to п¬Ѓle locations. See your storage or backup vendors for speciп¬Ѓcs
on the snapshot backup implementation they offer.
CompTIAВ® Network+В® (Exam N10-005)
586
Copyright В© Element K Corporation
APPENDIX D
Offline Files
Windows XP Professional, Windows Server 2008, and various other operating systems
support offline п¬Ѓles, which can serve as a backup method for remote users. The offline
п¬Ѓles process synchronizes a copy of a п¬Ѓle on the network with a copy of the same п¬Ѓle
on a remote computer or a website. This enables other users to access and use the network copy of the п¬Ѓle at the same time that the remote user edits the remote copy. Any
changes to the п¬Ѓle are synchronized with the remote userвЂ™s copy whenever the remote
user connects to the network.
Types of Distributed Storage Systems
Many systems include built-in support for distributed storage, and there are also thirdparty implementations for both software and hardware that you can purchase if you
need improved performance.
For example, MicrosoftвЂ™s Distributed File System (DFS) is a software-based distributed
hierarchical storage implementation that is built into Windows Server 2008 R2, and
other Windows server software. It provides users with a simple and convenient way to
access shared folders that are distributed throughout the network. With DFS, administration can make п¬Ѓles that are distributed across multiple servers appear to users as if
they all reside in a single location on the network. DFS comprises three main components. The п¬Ѓrst is the DFS root, which is a visible network share that contains folders
and п¬Ѓles. The DFS link resides below the root and it redirects the user to a share that
exists somewhere on the network. The DFS target (or replica) allows you to group two
identical shares, usually stored on different servers, as DFS targets under the same link.
Backup Policies
Each organization will need to maintain a backup policy that documents its own backup
requirements, procedures, and systems. The policy should include speciп¬Ѓcations for all the
components of the backup plan, including the backup software, hardware, media, schedule, and
testing plans, as well as designating administrative responsibility for the system.
Backup Policy Considerations
When you devise a backup policy and implement a backup system, you should consider these factors:
вЂў
Hardware and mediaвЂ”What is appropriate for your environment? How do you
balance cost against performance?
вЂў
SoftwareвЂ”Can you use the utilities built into your operating system, or will you
need a dedicated third-party backup application?
вЂў
Backup administrationвЂ”Who is responsible for performing backup functions?
вЂў
Backup frequencyвЂ”How much data you can afford to lose determines how often
you will back up.
вЂў
Backup methodsвЂ”Which of several backup media-rotation schemes is appropriate
for your organization?
вЂў
Backup typesвЂ”Which of several schemes will you use for backing up new and
existing data efficiently? What is the balance between partial and complete backups?
вЂў
Backup setвЂ”How many tapes or other media will you need for each backup?
вЂў
Backup schedulingвЂ”What time of day and when during the week will you run
the backups? Will users be logged on? Will п¬Ѓles be open?
Appendix D: Disaster Recovery Planning
587
Copyright В© Element K Corporation
APPENDIX D
вЂў
Media identiп¬ЃcationвЂ”What are the standards for labeling backup media?
вЂў
Media storageвЂ”Where will backup media be kept? Onsite or offsite, or in multiple locations?
вЂў
Recovery testingвЂ”When and how will you perform test restorations of data? Who
is responsible?
вЂў
MaintenanceвЂ”What scheduled maintenance or replacement is required for the
hardware, software, and media? When will this be performed? How will you budget for it?
вЂў
Restoration timelineвЂ”Do you have a complete plan for recovering all lost data?
How long is recovery expected to take?
Network Reconstruction Plan Maintenance
A network is a living entityвЂ”most companies do not stay the same. A disaster recovery plan
needs to reп¬‚ect changes to the organization. You should formally review the disaster recovery
plan at least twice a year, and informally review it quarterly. A formal review should include
business managers, the CIO, corporate staff, and IT managers. A formal review makes many
employees, including corporate personnel, aware of the review. An informal review can be
done by the appropriate administrator and his or her staff. During a review, check administrative passwords, recovery agents, and changes to the backup scheme. Review time is also a
good time to train new IT personnel on the recovery plan.
Once the plan has been reviewed and accepted, it needs to be distributed to the appropriate
people. To ensure that you can access the plan in the event of an actual disaster, at least one
copy must be stored offsite in a secure but known location, such as a remote corporate office.
If your company uses an offsite data storage location, keep copies there. If your company uses
an offsite storage/management company, keep copies on п¬Ѓle with them. Key managers might
also want to keep copies of the plan at their homes.
CompTIAВ® Network+В® (Exam N10-005)
588
Copyright В© Element K Corporation
LESSON
LABS
LESSON LABS
Due to classroom setup constraints, some labs cannot be keyed in sequence immediately following their associated lesson. Your instructor will tell you whether your labs can be practiced
immediately following the lesson or whether they require separate setup from the main lesson
content. Lesson-level lab setup information is listed in the front of this manual in the course
setup section.
LESSON 3 LAB 1
Describing Network Media and Hardware
Activity Time:
20 minutes
Scenario:
In this activity, you will describe network media and hardware components.
1.
A user on your network uses a Personal Digital Assistant (PDA) to keep track of her calendar and contact list. She synchronizes the PDA data frequently with her laptop
computer via the systemsвЂ™ infrared ports. She complains that she intermittently loses
the infrared connection between the two devices. You visit her workstation and find
that she is seated in close proximity to a large window. What problem do you suspect?
2.
You have a logical bus network formed by connecting devices with twisted pair cables.
As you expect considerable traffic on the network, you need maximum transmission
speeds between the nodes on the network. Which network device would you use to
handle this requirement?
a) Router
b) Bridge
c) Switch
d) Gateway
Lesson Labs
589
Copyright В© Element K Corporation
LESSON
LABS
3.
Match the network connectivity device to its description.
Gateway
a.
Connects wir

Download Report