History of Mayo CG

Foreword
MS/PhD are completely different from other programmes at IIT Madras. These are
the research based programmes and the scholars acquire the capability of finding
solutions to those problems that are encountered in industries, by applying the
theory studied earlier. So, every scholar does a minimum required course work and
then takes up a problem. Every scholar works on an unique problem. Every scholar
is different from the other, in terms of their work. Despite these differences, they are
similar as they have to apply their knowledge of various subjects and this creates a
overlap of knowledge among the scholars. During the process of this problem
solving a scholar will go beyond the subjects he/she would have studied, as many
times they need to take the refuge in a different discipline to get to the solution. This
makes a scholar good in various disciplines at the same time. All these and much
beyond these, raise the requirement to get a much desired individual attention to a
scholar, from the world outside. That is why this special book for research scholars !
This year book contains the profiles of scholars who would graduate before 2013.
Hoping that the book would serve its purpose....
List of areas of interests
Acoustic Emission
Acoustics
advanced material processing
Advanced Process
control
Advanced structural
mechanics
Advertising
AERODYNAMICS
Aerospace
Aerospace and Mechanical Field
Aerospace Industry
AFM
Air Breathing and Non Air Breathing
Propulsion
Air Pollution control
techniques
Aircraft Structures
Algorithms
Algorithms & Data
Structures
Alternate Fuels
Alternative Fuels
Aluminium alloys
Analog Electronic Circuits
Analyst
and Characterization
Techniques.
Industrial Safety Engineering
Rapid control prototyping and HIL testing
Applications of Power
Electronics in Power Applied Mathematics
Systems
Approximation Algorithms
artificial intelligence
ASIC
artificial neural networks
asymmetric synthesis Atomic Force Microscopy
Atomization
Automobile
Aerodynamics
Automotive Instrumentation
automobiles
Automotive Noise and
Vibration -Testing and Automotive Systems
Simulation
Axial flow Fan and Compressors
Axial Flow Machines
Basic FEM
Battery management systems
Biochemical
Engineering
Big Data
bio-fuels
Bioinorganic chemistry
Biological treatment
technologies
Biomaterials
Biomedical image and
Biomedical Instrumentation
signal processing
Biomedical Optics
Biopharmaceutical
nanobiotechnology
Bioprocess optimization
Biosensors
Bitumen
Business Intelligence
and Analytics
CAD modelling
Cancer biology
Carbohydrate
chemistry
Carbon nanohorns
Carbon Nanotubes
Cardio vascular
Genetics
Case Based Reasoning
Catalysis
Cavitation
Cellular Networks
Cement
CFD
CFD and its application to
chemical engineering
processes
CFD and its application to engine processes
CFD Simulation
Characterization.
Chemical Reaction Engineering
Chemical Reactor
Theory
Cloud Computing
Coal combustion and gasification
Combined Cycle
Power Plants
Combustion
Combustion & Propulsion
bionanotechnology
Combustion modelling Communication
communication (Networking)
Communication
Networks
Compilers
Complexity Theory
Composite Materials
composite structures
composites
compressed sensing
compressible flow and jet
propulsion
computational and experimental
aerodynamics/hydrodynamics
Computational Biology Computational Combustion
Computational Electromagnetics
Computational Fluid
Dynamics
Computational Fluid Dynamics
Computational geometry
and Heat Transfer
Computational
Hydraulics
Computational Lithography
Computational material science based on
Density Functional Theory
Computer aided design
Computer Architecture
Computational
Mechanics
Computer networks
Computer Science
Computer Vision
Combustion
simulation
Concrete technology
Conducting Polymers
Conjugate Heat
Transfer
Constitutive Modelling
Construction methods and equipment
Construction planning Consumer behaviour in sales
and control
promotion
control system
Control Systems
Controller design
Convex optimization
Cooking
Cooperative Games
Corporate Finance
Corporate Strategy
Corrosion and fatigue analysis
Counter Rotating Turbines
of structure
Cross layer algorithms Cryogenics
Cryptanalysis
Cryptography
Damage analysis
Damage identification and evolutionary
algorithms.
Data Analysis
Data Mining
Data Modelling
Data Warehousing
Databases Systems
Deep Foundation Techniques
Design and Structural
Design of Operating Systems
Analysis
Design optimisation
Design Optimization
Designing of reinforced
concrete structures
Detection and Estimation Theory
Diffractive optics
Digital circuit design and
verification
Digital Signal Processing
Discrete Maths
Distributed Computing
Distributed data processing
Distributed Systems
drug synthesis
Dynamics
Dynamics of
Structures
Econometric Techniques
Economics
electrical insulation
Electrochemistry
Electrochemistry for advanced electrodes
Electron Microscopy
electronic circuit design analog and digital
Electronic Cooling
Electronics-analog
circuits
Embedded
Embedded system design
Empirical Modelling
Energy and Environmental
Sustainability
energy conversion technologies
Engine Condition
Monitoring
Engine Exhaust Emission
studies and control
Environmental Engineering
Environmental
Monitoring and
Analysis
Enzyme Engineering
etching
Exchange bias
Experiemntal
Techniques
Experimental mechanics
Failure Analysis
Farm Power and
Renewable Energy
Fatigue and Fracture
FEA
FEM
Femtocell
Ferroelectricity
Financial Analysis and
Financial Markets
Valuation
finite element analysis
Finite element analysis and
optimization
Finite Element Analysis
Finite Element Analysis in Manufacturing
Finite Element
Analysis of Structural Finite Element Method
Components
Fire Safety Research
Flood management
Flood routing
Flow Visualization Studies
Fluid & Thermal
sciences
Fluid dynamics
Fluid flow
Fluid structure interaction
Fluorescence etc.
Fluid mechanics
Fluid power
Forecasting
formulation
FPGA
Fracture
Fracture and Fatigue
Mechanics
Frustrated spin systems
Fuel Cell Technology
Fuel Cells
Game AI
GAME THEORY
Gas dynamics
Gas Turbine
Gas turbine Engine
Gas Turbine Heat Transfer
Geometric algorithms
GIS in civil engineering
Grain boundary physics in
chalcopyrites
Granular flow
Graph Theory
Graphical Models
green chemistry
green energy
Green Marketing
Ground Improvement
Ground Improvement
Techniques
Hardware and software development
Heat and Mass
Transfer
Heat transfer
Heat transfer in heat pipes
Heat Transfer
High performance computing High Power fibre Lasers
High Speed Flows
high voltage
Holography and computer generated
holograms
HR Analytics
Human Resources
Hydraulics and Pneumatics
Hydrodynamics
hydrodynamics of offshore
structures
IC Engines
Image Processing
Image Processing Algorithms Industrial Robotics
Industrial wastewater
Information Retrieval
treatment
Information Theory
Infrared Thermal
Imaging
Infrastructure and Project
Finance
Innovation clusters
Innovation
Management
Instrumentation
Integrated Optoelectronics
Intellectual Property
Rights
Interaction of natural and
Interferometry
mixed convection heat
transfer with surface radiation
Internal Combustion
Engines
Interpretation and
Presentation
Iron based composites
isolated enzymes
Jahn Teller effect
Jet engine combustion analysis
Kernel Methods
Kernel Programming
Kinetics study using Laser Induced
Fluorescence (LIF)
laser
Laser Diagnostics in Engines
Lasers and Optical Fibers
Liquidity Management
Low temperature
physics
LTE
Machine Design
Machine Design
Machine dynamics
Machine Learning
Machining
Magnetic and Semiconductor
Magneto resistance
nanoparticles
mannequin design
Manufacturing of Composite
Structural Components
Marine propulsion
Marketing
Marketing Strategy
Material Characterisation
Material
Characterization
Material Modelling
Material Science
Material Synthesis
Material Testing
Materials
Materials
Characterization
Materials Science and
Electrochemistry
Mathematical Analysis of algorithms
Mathematical
Modelling
mathematics
Mechanical behaviour of materials
Mechanical Vibration Mechanics of Solids
mechatronic systems
Mechatronics
Medium Access Control
Metal cutting
metal forming.
Metrology
Micro-machining
Micro-manufacturing Micro/Nano fabrication
Microfludics
Microgravity
MIMO techniques
combustion Research
Mobile Backhaul Networks
Model Based Design
Modelling and Simulation
Modelling and Simulation
Modelling and
Simulation of Fuel
Cells
Modelling and Simulation of
Manufacturing
Molecular Biology
Molecular biology of
Gene
Molecular medicine
multi-parameter estimation
Multiferroics
Multimedia Networks
Multiphase flow
Multiphase fluid flow multirobot systems
Mutiphase flow
Nano chemistry
Nano technology
Nanomaterials synthesis
Nanomaterials
Nanotechnology
Nanotechnology and Nanobiotechnology
Natural Language Processing
natural product
synthesis
NDT application in Civil
engineering
Network Security
Network Traffic
Modeling
Networking
Networks
Neural networks
Non Destructive Testing
Non linear analysis
Nonlinear control
system
Nonlinear control system and
Numerical Algorithms
System identification
Numerical modeling of
numerical weather modelling NVH
particle and fluid flow
Oean Off shore and
Costal Engineering
offshore structures
OpenSystems(Linux and clones)
Operating Systems
Operations Management
Operations Managemet
Operations Research
Optical Access Networks
Optimal Control
Optimization
Optimization of
thermal systems
Optimization for Machine
Learning
Optimization of Mechanical systems
Organic synthesis
Organizational Behaviour
Organizational
Behaviour and Human Organo catalysis
resource management
Organocatalysis
Organometalic
chemistry
Parallel Computing
Painting
Partial discharge
studies in transformer Pattern recognition
insulation
Pattern Recognition techniques
persuasive
communication
Pharmaceutical science (drug
Photo luminescence
delivery
PHY layer design and
development
Pile Foundation
Planning
Playing music (Guitar
and Violin)
playing the keyboard
Polishing
Powder metallurgy
Power efficiency
Power Electronics
Power Plant Cycles
Power systems
Power systems. Control systems
Pre Engineered
Buildings
Precision Machine Design
price promotions and exchange offers
Private Equity
Probability Theory
Process Analysis
Process development process modelling
Process Modelling and Simulation
Process modelling
Process Modelling &
Simulation
Process Optimization
Production
Engineering
Programming
Project and Team Management
Project Transition and
Propulsion
Development
Protein biochemistry
protein engineering
Proteomics
Provable Security
psychology
Public Key Cryptography
Public Policy
Public Systems
Q-switch Lasers
Qualitative research
Quantitative and
Qualitative Analysis
Quantitative Finance
Quantum Computation
radiation in
participating media
rainfall estimation
reading
reading fiction
Real Options
Real time Embedded systems (DSP & FPGA
based)
Refrigeration and air
conditioning
Reinforced soil structures
Reinforcement Learning
Renewable Energy
Renewable Energy and
Thermal Engineering
research
RF and Microwave
Engineering
RF Design
Risk management
robotics
Robotics and Automation
Robotics and Control
satellite remote
sensing
Scanning probe Microscopy
Scheduling
Search
Seismic Design
SEM
Semantic Web
Semiconductor device
fabrication and
characterization
semiconductor devices
Semisolid processing
Sensors
Severe plastic deformation techniques
Shape matching and
feature extraction
Ship Structures
Signal Processing
signal processing and
electronic systems
Silicon Photonics
design
simulation
Simulation Modeling
in Water Resources
Site Investigation
simulations
Sketching with pencil Smart Composite Materials
Smart Structures
SMPS.
SOFC-GT
software development
Solid-state
Bioprocessing
Solid Mechanics
sparse signal processing
Speech Processing
Speech Recognition
sports
spray drying
Sprays and atomization
Stem cell biology
Stochastic Modelling
and Analysis
Stochastic Optimisation
Strategic Human Resource Management
Strategic Management Strategic Sourcing
Stream Reasoning
Strength of materials
structural analysis
Stress Analysis.
Structural Analysis and
Design of RCC Steel
Structural Health Monitoring Structural Mechanics
PSC
Supercapacitor
Supply chain Management
Suprramolecular chemistry
Surface Engineering
Surface Water and
Groundwater model
development
Surface Water Hydrology
surface wetting
Sustainability
SUSTAINABLE CONSTRUCTION
Synthesis of
macromolecules
synthesis of OLED based novel
Synthetic organic chemistry
organic molecules
system automation
System Design and
Development
System Identification
Tall Structures
Teaching
Teaching/ R&D in Biomaterials
TEM
TEM.
Theoretical Computer Science
Theoretical Physics
Theory of Computation
Thermal Hydraulics
Thermal Management
Thermal spray coatings
of Electronic Devices
thermodynamics
Time Series Analysis
Tissue engineering
Time Series Analysis
Training and Development
Travelling
Tribology
Tungsten carbide
Turbomachinery
Turbomachines
Turbulence
Turbulence Modelling
ultrasonic NDE
Material
Characterisation
Ultrasonics
Unconventional machining
Utilities & Piping
Vehicle Dynamics & Control
Vibration
Virtual
Instrumentation
VLSI
VLSI design and technology
Waste Management.
Waste water treatment
water-jet hull interaction.
waterjet hull
interaction
Watershed Management
wavelet transform
Welding
Workforce Engagement
wind turbine
Wireless and cellular
communications
Wireless Communication
Wireless Networks
Department of Aerospace Engineering
C Palani Kumar
Doctor of Philosophy (PhD)
Department of Aerospace Engineering
Guide : Dr. Amit Kumar
Title of thesis : Numerical Investigations on Regression Rate Enhancement in Hybrid Rocket Motors
Thesis abstract : Hybrid rockets are the safest rockets combining the potentials of both solid and liquid rocket
motors. However they are not commercially successful due to its very low regression rate. Current research in
hybrid rocket motors is mainly focused on enhancing the regression rate by various techniques like, diaphragms
in the port, swirling flow in the combustion chamber and oxidizer added solid fuel. The underlying fundamental
physics in most of these configurations is not understood completely. Effect of parametric variations in individual
techniques is not clearly quantified. Study on combination of these techniques also has not been attempted. In
the present study, an attempt has been made to understand the effect of these techniques on the regression rate
of hybrid rocket motors. A systematic numerical study is conducted using ANSYS Fluent. The gas phase
combustion chamber is chosen as the computation domain where the governing equations are solved. Custom
written user defined functions (UDFs) are used to augment the boundary conditions.
In the parametric study
conducted, the following parameters are varied systematically: height and axial location of a single diaphragm,
height and spacing between multiple diaphragms, swirl number at the oxidizer inlet, axial and swirl velocity
profiles at the oxidizer inlet, percentage of solid oxidizer mixed with the solid fuel, and the length, diameter and
L/D ratio of the combustion chamber. Regression rate enhancements over the base configuration (one without
any enhancement techniques) are quantified for each of the regression rate enhancement techniques. Studies are
also carried out with a combination of different enhancement techniques and the results are compared with base
configuration as well as configurations with single enhancement technique.
Skills :
Packages: Expert level - ANSYS Fluent (RANS, Turbulence, Species transport and reaction, UDF),
Tecplotm MS Office (Word, Excel, Powerpoint); Beginner level - Matlab, CFX ;
Programming Languages: Intermediate level - C, C++ ; Beginner level - Fortran;
OS worked on: Windows, Linux
Research interests :
Computational Fluid Dynamics,
Propulsion,
Combustion modeling,
Heat and mass transfer,
Turbulence modeling.
Areas of interest : Propulsion, Computational Combustion, Computational Fluid Dynamics, Heat and Mass
Transfer, Fluid Mechanics
Publications/Conferences :
Journals
C. Palani Kumar and Amit Kumar, вЂњNumerical Investigation on the Effect of Diaphragms on Regression
Rate in Hybrid Rocket MotorsвЂќ, Journal of Propulsion and Power, [Under review]
C. Palani Kumar and Amit Kumar, вЂњEffect of Swirl on the Regression Rate in Hybrid Rocket
MotorsвЂќ, Aerospace Science and Technology, [Under review]
International Conferences
C. Palani Kumar and Amit Kumar, вЂњScaling in Hybrid Rocket MotorsвЂќ, 9th International Conference on
Flow Dynamics, Sendai, Japan, September-2012.
C. Palani Kumar and Amit Kumar, вЂњA Numerical Study on the Regression Rate of Hybrid Rocket Motors
Using a Combination of Enhancement TechniquesвЂќ, 48th AIAA / ASME / SAE / ASEE Joint Propulsion
Conference & Exhibit, Atlanta, USA, July-August, 2012.
C. Palani Kumar and Amit Kumar, "Regression Rate Enhancement of Hybrid Rocket Motors using Mixed
Hybrid Concept", 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, USA,
November, 2011
C. Palani Kumar and Amit Kumar, вЂњMixed Hybrid Concept for the Enhancement of Regression Rate of
Hybrid Rocket MotorsвЂќ, 37th National and 4th International Conference on Fluid Mechanics and Fluid
Power, Chennai, December-2010.
C. Palani Kumar and Amit Kumar, вЂњA Numerical Study of the Effect of Transverse Protrusions on the
Regression Rate of the Hybrid Rocket MotorвЂќ, 7th International High Energy Materials Conference and
Exhibit, Pune, December-2009.
C. Palani Kumar, Navya Mastanaiah and Amit Kumar, вЂњEnhancement of Regression Rate in Hybrid
Rocket Motors by using Transverse Protrusion along the Length of Fuel GrainвЂќ, 6th International High
Energy Materials Conference and Exhibit, Chennai, December-2007.
National Conferences
C. Palani Kumar and Amit Kumar, вЂњRegression Rate Enhancement in Vortex Hybrid Rocket Motors Using
Mixed Hybrid ConceptвЂќ, National Propulsion Conference, Chennai, India, February-2013 [To be presented]
C. Palani Kumar and Amit Kumar, вЂњEnhancement of Regression Rate of Hybrid Rocket Motors using
Transverse Protrusions along the Axial Length of the MotorвЂќ, 35th National Conference on Fluid
Mechanics and Fluid Power, Bangalore, December-2008
About me :
Extensive publications at IIT Madras,
Won Best outgoing student award, UG, Mechanical Engineering,
Won Gold medal, Higher secondary school, English,
Self motivated learner,
Active team player.
Education :
Ph.D., Aerospace Engineering, 2006-2013 (Expected), IIT Madras, Chennai.
B.E, Mechanical Engineering, 2000-2004, Kumaraguru College of Technology, Bharathiar University,
Coimbatore.
E-mail id : guru.palani@live.com
Mulla Irfan Ahmed
Doctor of Philosophy (PhD)
Department of Aerospace Engineering
Guide : Dr. S. R. Chakravarthy
Title of thesis : Interaction of flames with varying stratification and grid generated turbulence
Thesis abstract : The drive towards low pollution levels of oxides of nitrogen has led to lean premixed flames
being established in practical combustion devices such as land-based gas turbines for power generation, but they
pose immense problems of flame stability. Devices such as flight gas turbine combustors adopt injection of fuel
almost directly into the combustion zone, but with intense fuel-air mixing caused by swirl flow, leading to partially
premixed flames that are relatively stable. In many practical processes, the combustion is turbulent rather than
laminar. Nevertheless, the investigation of laminar partially premixed flames is a prerequisite to understand their
turbulent counterparts. Hence present investigation is divided into two objectives, primary one to understand the
turbulence flame interaction and second to investigate laminar partially premixed flames. Co-flowing methaneвЂ“air
partially premixed flames are stabilized in a splitter plate burner (dimension 50 mm x 50 mm), with wide variation
of the reactant concentration gradient. Triple flame is a special case of partially premixed flames; such flames with
wide range of reactant premixedness are obtained. The velocity field is deduced from particle image velocimetry
(PIV) and the flame structure is visualized by means of laser induced florescence of the OH radical (OH-PLIF).
The flame structure changes from that of a nearly non-premixed to a nearly premixed flame as the concentration
gradient is varied. The flame curvature increases linearly with the concentration gradient over the wide range
tested. Flame speed is evaluated from the velocity just upstream of flame leading edge. Flame stretch, which is
nothing but tangential strain along flame front is obtained. In later work perforated plate is used to generate
turbulence, present burner can stabilize turbulence partially premixed flames. Here simultaneous OH-PLIF PIV is
performed, which involves sophisticated instrumentation for synchronization of the data acquisition events. Data is
processed with MATLAB software; it involves image processing, edge detection and noise reduction.
Simultaneous measurement of flame front and velocity provides accurate information; velocity at the flame leading
edge is obtained which is nothing but turbulent flame speed. To generate large scale turbulence a large splitter
plate burner 220 mm x 220 mm was employed, it accommodates active turbulence grid (ATG). Unlike passive
grid, ATG has moving parts; winglets are mounted on each grid rod. These rods are rotated randomly by a
stepper motor; LabView program controls each one of the 24 stepper motors. ATG provides means of creating
random blockage to the flow. By controlling the speed range and turnover time range turbulence quantities can be
controlled to some extent. This provides a turbulence control without changing mean flow velocity which is not
possible with passive grid but at the cost of complexity. ATG will be used for fewer flames due to high fuel
consumption.
Skills :
Various 3D-modelling CAD softwares, Autodesk Inventor, IDEAS, Pro/Engineer.
2D-drafting software AutoCAD.
Image processing and data processing algorithm development by MATLAB package.
Laser diagnostics namely, PIV, PLIF.
Research interests :
Combustion flow field characterization by Particle Image Velocimetry (PIV)
Flame front imaging by Planar Laser Induced Floroscence of OH radicale (OH-PLIF)
Air-fuel mixing quantification with acetone PLIF
Areas of interest : Propulsion, Combustion, Fluid Mechanics.
Publications/Conferences :
Jayaraman, K., Mulla, I. A., Chakravarthy, S. R., and Sarathi, R., вЂњAluminium Agglomerate Size
Measurement of the Nano/Micro-Aluminized Composite Propellants,вЂќ AIAA Paper No. 2010-960, 48th
AIAA Aerospace Sciences Meeting, Orlando, Florida, USA, 4-7 January 2010.
Roy, A., Anand, K. V., Mulla, I. A., Chakravarthy, S. R., and Balbudhe, K., вЂњAluminium Agglomerate Size
Measurements and Modelling in Composite Solid Propellants,вЂќ 8th Asia-Pacific Combustion Conference,
Hyderabad, India, 10-13 December 2010.
Bhatt, D.S., Mulla, I.A., Dhamangaonkar P.R., "Design and Development of Burner Ring to Enhance
Thermal Efficiency of Domestic LPG Stove and Assessment of its Performance", International Conference
on Recent Innovations in Technology,Kottayam, Kerala, India. February, 2011.
Anand, K.V., Roy, A., Mulla, I. A., Balbudhe, K., Jayaraman, K., Chakravarthy, S.R., вЂњExperimental data
and model predictions of aluminium agglomeration in ammonium perchlorate-based composite propellants
including plateau-burning formulationsвЂќ, Combustion and Flame, Available online 25 September 2012
(Article in Press).
About me :
Since my Diploma education I have enjoyed the Mechanical Engineering. Experience in Mahindra and
Mahindra taught me to anticipate the issues, so one can be well prepared even before things go wrong. When the
tractor prototype scheduled for assembly on production line, many issues showed up, this led to loss of
production. I have been told that I am good at managing the task with available resources. For example
performing complicated experiments first time in our lab proved to be a challenge, but dividing the task into
subparts eased the problem. At many occasion lab required the purchase and commissioning of equipments such
as lasers, high capacity chiller etc. Such activity requires co-ordination and follow-ups among purchase
department and supplier. This experience was valuable; I learned to expedite the purchase and installation
process. My career goal is to learn and implement a new knowledge. I believe that the research conducted in
past century has led to better quality of life. In this spirit I want to engage myself with the research oriented firm.
Education :
Diploma Mechanical Engineering, 2000-2003, SPM Polytechnique, Solapur, Maharashtra.
B.E. Mechanical Engineering, 2003-2006, Govt. College of Engineering Pune, Maharashtra.
E-mail id : irfan071084@gmail.com
Rajarshi Das
Doctor of Philosophy (PhD)
Department of Aerospace Engineering
Guide : Prof. Job Kurian
Title of thesis : Supersonic Flow over Three Dimensional Cavities
Thesis abstract : Keywords: 3D cavities, supersonic flow, pressure oscillations, mixing Airbreathing propulsion
devices employing scramjet is considered potentially most advantageous for practical hypersonic flights. Cavities
have been projected as flameholding and mixing devices in scramjet combustors. Performance of cavities used
for such purposes is significantly influenced by the aerodynamics induced by the cavity on the flow field. Pressure
oscillations, shock and expansion waves, unsteady shear layer dynamics are some of the key features of flow
over wall mounted cavities. Dependence of such aerodynamic characteristics on geometrical features of cavities
has been studied widely in the recent decades. The present investigation primarily focuses on the flow and
acoustic characteristics of partially spanning wall mounted cavities designated as 3D cavities. Effect of cavity
width (W) on mixing of primary supersonic flow and a gaseous injectant has also been studied for cavities with
constant length (L) to depth (D) ratio. The results are compared with those from a cavity which spans the full width
of the test section, called as 2D cavity.
The study has been carried out making use of the supersonic
freejet facility in the Gas Dynamics Laboratory of Indian Institute of Technology, Madras. Three different 3D
cavities of 50mm length (L) and 25mm depth (D) having length to width ratios (L/W) of 2, 3 and 4 and a 2D cavity
of L/W=5/6 were used in the experimental investigation. Each of the cavities was wall mounted in a rectangular
channel and flow in all the cases was at Mach number of 1.7. Unsteady pressure measurements, time resolved
and time averaged visualization of the flow field, velocity measurements using Laser Doppler Velocimetry and Mie
scattered imaging for mixing evaluation and pressure loss measurements were carried out. Numerical simulation
of the test section flow field was undertaken using commercially available computer code FLUENT.
It is
observed from the unsteady pressure measurements that the magnitude and mode of the pressure oscillations
depend on the cavity geometry. There is a jump in the mode of the dominant pressure oscillation to a higher value
as the cavity width reduces. Images captured during time averaged schlieren visualization show marked
difference in the shear layer thickness and shock wave angle at the leading edge as the cavity width changes.
Acoustic wave inside the cavity, flapping movement of the shear layer and the overall unsteady nature of the flow
field could also be seen in the visualization images Disturbances generated in the flow field due to the presence of
the cavity are observed to be subdued for the narrowest cavity model.
Fluid movements in lateral planes
inside the cavity and over it are investigated by the velocity measurements at discrete points on multiple planes
using Laser Doppler Velocimeter. Presence of lateral velocity in the vicinity of the leading and trailing edges only
is observed for narrower partially spanning cavities. Fluid movement in the lateral direction over the cavity is
observed to be at different velocities for the different cavity models. Turbulence induced in the flow field by the
widest partially spanning cavity is observed to be higher. Quantum of mixing of a secondary gaseous injectant into
the primary flow which usually depends on the flow unsteadiness varied with cavity width. The widest partially
spanning cavity offered better mixing. Associated total pressure loss with this cavity is observed to be higher than
that with the other models.
Flow in the test section for all the models has been simulated using
commercially available software FLUENT. The variation of density and pressure along the axial midplane of the
test section show good agreement with the experimental flow visualization results. Vortical structure on the axial
midplane inside the cavity is observed to be larger for the wider cavity. The fluid mass exchange rate (mc)
between the cavity and the freestream depended on the cavity width. Larger mass exchange was observed for
the wider cavities. The ratio of mc to the cavity volume is found to influence the amplitude of cavity generated
pressure oscillations.
Skills :
Problem solving
Research interests :
Development and application of experimental and numerical techniques to
study fluid structure interactions in confined flow systems
fuel atomisation and fuel-air mixing in supersonic flow
shock wave-boundary layer interaction
liquid propellants
Design and development of
compressor blades
scramjet mixing techniques
Areas of interest : Fluid Mechanics, Experiemntal Techniques, Air Breathing and Non Air Breathing Propulsion
Publications/Conferences :
Referred Journal:
1. Rajarshi Das and Job Kurian; вЂњSupersonic Flow over 3D cavitiesвЂќ; accepted for publication in
the Aeronautical Journal of the Royal Aeronautical Society, London.
(To be published in February,
2013 edition)
2. Rajarshi Das and Job Kurian; вЂњAcoustic and Velocity Field over 3D CavitiesвЂќ; accepted for publication in
the Theoretical and Applied Mechanics Letters of The Chinese Society of Theoretical and Applied
Mechanics co-published by American Institute of Physics.
Conferences:
1. Rajarshi Das and Job Kurian, вЂњEffect of Cavity Width on Supersonic Flow over 3D CavitiesвЂќ, ISABE
2011-1517, Proceedings of ISABE 2011, Gothenburg, September, 2011.
2. Rajarshi Das and Job Kurian, вЂњPressure Oscillations and Wave Structure in Supersonic Flow over 3D
CavitiesвЂќ; Proceedings of 13th ACFM, Dhaka, December, 2010.
3. Rajarshi Das and Job Kurian, вЂњExperimental and Numerical Study of Supersonic Flow over 3D CavitiesвЂќ;
Proceedings of 4th NCFMFP, Chennai, December, 2010.
4. Rajarshi Das and Q.H. Nagpurwala, вЂњPerformance Evaluation of 2D Compressor Blade Cascades using
MISES computer codeвЂќ; Proceedings of 9th Annual CFD Symposium, Bangalore, August, 2006.
5. Rajarshi Das and Job Kurian, вЂњDiscrete Pressure Oscillations and Mass Exchange Between Cavity and
Supersonic MainstreamвЂќ; accepted for publication in the National Propulsion Conference to be held in
Chennai on February, 2013.
6. Rajarshi Das and Job Kurian, вЂњTurbulence Induced by 3D Cavities in Supersonic FlowвЂќ; submitted for
ISABE 2013 to be held in Busan in September, 2013.
About me :
Love to work in a team
Education :
AMAeSI (B.E) Aeronautical Engineering , 1999-2003, Aeronautical Society of India.
M.E Space Engineering and Rocketry, 2005-2007, Birla Institute of Technology, Mesra.
PhD Aerospace Engineering, 2007-2012, IIT Madras.
E-mail id : rishi.aero@gmail.com
Rammohan Y S
Doctor of Philosophy (PhD)
Department of Aerospace Engineering
Guide : Dr. HSN Murthy
Title of thesis : Computational studies applied to partial slip fretting contacts.
Thesis abstract : Involves computational studies of partial slip fretting contacts. Numerical tools are used to
evalute the contact parameters. Studies also involve geometry effects and damage of surfaces.
Skills :
Analytical Machine Design
CAD/CAE Tools usage.
proficient in Ansys, Abaqus, Catia and Hypermesh.
Coding in 'C' and FORTRAN, MATLAB.
Research interests :
Contact Mechanics
Fretting Studies
Areas of interest : Machine Deisgn, Finite Element Method
Publications/Conferences :
Y.S. Rammohan, H. Murthy, вЂњThree dimensional finite element analysis of partial slip contacts subjected
to combined loadingвЂќ, Finite Elements in Anaysis and Design, Elsevier Journals, Feb. 2012, Vol. 56, p.
9-19.
Y.S. Rammohan and H. Murthy, "Effects of finite width in fretting contacts under partial slip conditions". In
proc. of 5th Intl. conf. on theoretical, analytical, computational and experimental mechanics-2010, pp
354-357, Dec. 27-29, IIT Kharagpur, India.
Y.S. Rammohan and H. Murthy, вЂњInfluence of an Edge Fillet in Three Dimensional Partial Slip ContactsвЂќ,
In proc. Of 9th AES-ATEMAвЂ™ 2011, Intl. Conf. on Advances and Trends in Engineering Materials and their
Applications, Montreal, Canada: August 01 вЂ“ 05, 2011.
Y.S. Rammohan and H. Murthy, вЂњEffect of Integration Schemes in the Three Dimensional Contact
Analysis of Partial Slip ContactsвЂќ, In proc. IN-TECH 2011, International Conference on Innovative
Technologies, Bratislava, Slovakia: October 01-04, 2011.
Y.S. Rammohan and H. Murthy, вЂњNumerical Simulation of Bulk Stress Effects in Partial Slip Contacts of
Finite WidthвЂќ, ESMC 2012, 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012.
About me :
Mechanical Engineering background.
Masters in Machine Design
Pursuing Doctoral Studies in Aerospace Structures.
Education :
B.E. in Mechanical Engineering, 1991-1995, BMS College of Engineering, Bangalore, Bangalore
University.
M.Tech in Machine Design, 1999-2001,BMS College of Engineering, Bangalore, VTU-Karnataka.
E-mail id : ysrmohan@gmail.com
Sujith S
Doctor of Philosophy (PhD)
Department of Aerospace Engineering
Guide : Prof. Job Kurian and Dr. T.M. Muruganandam
Title of thesis : EXPERIMENTAL AND NUMERICAL INVESTIGATION OF GASEOUS INJECTION INTO
SUPERSONIC FLOW USING STRUTS AND PYLONS
Thesis abstract : KEY WORDS: Supersonic mixing; struts, pylons, streamwise vortices, Mixture fraction, Degree
of Unmixedness, Percentage of Mixing Area, LDV, Turbulence intensity. The scramjet combustors require rapid
and uniform mixing of the fuel and air for augmented and stable combustion within short combustor lengths. A
number of methods are proposed earlier for mixing and entrainment of the fuel. In the present work experimental
and numerical studies are done on mixing of sonic injectant from struts and pylons of various trailing ramp angles
with free stream air at Mach number 1.63. By providing alternate trailing ramp on the strut and pylon streamwise
vortices in spanwise row-configuration are generated. In the present study various alternate trailing ramp struts
and pylons were examined and their capability to enhance supersonic mixing was evaluated. Numerical
simulation of the flow field using commercially available software Fluent with struts and pylon of various trailing
ramp angles such as 2.86, 5.71, 8.53, 11.31, 14.04, 18.43 and 26.57 degrees are also carried out. From the
numerical results, it is seen that among the models analyzed mixing enhancement is best for the strut and pylon
with 14.04 degrees ramp angle while comparing with plain strut and plain pylon. Experiments were conducted
using struts and pylons of 14.040 ramp angle only. All the experimental investigations were carried out in the
supersonic blow down free jet facility of Gas Dynamic Laboratory, IIT Madras. The secondary injections from the
struts and pylons were parallel to the main stream at sonic conditions. Three types each of struts and pylons are
considered for the experimental investigation - plain strut and plain pylon, two relieved ramp strut and pylon
(2RRS/2RRP-14.040) and three relieved ramp strut and pylon (3RRS/3RRP-14.040). Diagnostic methods
employed are Mie scattering combined with image processing, time-averaged schlieren and time-resolved high
speed shadowgraph images, velocity measurement using LDV and total pressure loss measurements. The
Degree of Unmixedness (DU) and Percentage Mixing Area (PMA) results obtained from the Mie scattering studies
show that three relieved ramp strut and pylon (3RRS/3RRP) give better mixing performance while comparing with
other strut and pylon configurations. The vertical structure that could be found in the numerical analysis of the flow
fields were identified well from the velocity vectors obtained from the velocity measurements. From LDV
measurements it is also understood that alternative trailing ramp on struts and pylons increases turbulence
intensity when compared with plain strut and plain pylon. Increased turbulence is an important reason for the
better mixing performance of the struts and pylons. Plain strut and Plain pylon show the least total pressure loss
when compared with models having trailing ramps. Overall, struts show better mixing performance than all pylon
configurations.
Skills :
1. Excperiments in Wind tunnels
2. Numerical Simulation using Fluent Software
Research interests :
Injection is Supersonic flow.
Areas of interest : Aerospace and Mechanical Field
Publications/Conferences :
1. Sujith.S, T.M.Muruganandam and Job Kurian, вЂњEffect Of Various Trailing Ramp Angles in Strut Based
Injection in Supersonic Main FlowвЂќ, Journal of Propulsion and Power (Accepted for Publication)
About me :
I am sincere and deditated to any job assigned to me. I am an experimentalist rather than computation. Interest in
learning and doing new things. More over i am a patriot, always like to do something to my nation
Education :
1. B.Tech in Mechanical Stream Automobile Engineering, 1996-2000, S.C.T College of
Engineering, Trivandrum, University of Kerala
2. M.S (By Research) in Mechanical Engineering, 2005-2008, College of Engineering,
Guindy, Anna University,
E-mail id : sujith9051@gmail.com, sujithmil@yahoo.com
Amit Kumar Panigrahy
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Muruganandam T M
Title of thesis : EXPERIMENTAL STUDIES HIGH SPEED AIR INTAKES
Thesis abstract : In supersonic and hypersonic vehicles, intake plays a major role in order to give better
performance. All air breathing engines require an inlet to diffuse air from free stream velocity to a lower velocity
acceptable for further use. The inlet component is designed to capture exact amount of air required, with minimum
pressure loss, deliver the air with minimum flow distortion. All most every type of high speed air intakes
(supersonic and hypersonic) experiencing shock oscillation during operation called as inlet buzz. Inlet buzz can
occur due to several reasons such as large internal area contraction ratio, serious shock-boundary layer
interactions, and high back pressure. Inlet buzz is highly undesirable phenomena which can lead to reduction of
thrust and even damages the structure. Hence detailed study of inlet buzz should be necessary. . The main focus
of this research is to suppress the buzz by changing the cowl deflection angle, and understanding the flow field
inside the duct. Buzz can be suppressed by changing the cowl deflection angle, at a particular cowl deflection
angle, buzz will disappear and flow field will be smooth. It is not seen any experimental literature regarding buzz
suppression by using cowl deflection angle.
Skills :
Matlab
Ansys Fluent
Gambid
AutoCAD
Research interests :
High Speed Flows
Computational Fluid Dynamics
Areas of interest : High Speed Flows, Computational Fluid Dynamics
Publications/Conferences :
National Propulsion Conference 21-23 February-2013, Aerospace engineering department, IIT Madras,
Paper title: EXPERIMENTAL STUDIES ON INLET BUZZ IN HIGH SPEED AIR INTAKES.
About me :
Being a Experimentalist i can handle any pressure and workload, because i struggled a lot during my MS
Education :
B .E in Aeronautical Engineering,2005-2009,Aeronautical Society of India, New Delhi.
Master of Science by Research in Aerospace Engineering,2010-1013,Indian Institute of Technology
Madras, Chennai
E-mail id : amitkumar1646@gmail.com
Balavishnu U
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Dr Nagendra Gopal K V
Title of thesis : Modelling the coupled static and dynamic response of stiffened sandwich composite panels
Thesis abstract : A sandwich structure consists of two thin, sti ff and strong face sheets connected by a thick ,
light and low-modulus core using adhesive joints. The main advantage of a sandwich structure is its exceptionally
high flexural sti ffness-to-weight ratio compared to other architectures. But a major disadvantage when compared
with monolithic composites is that they are more prone to delamination and failure due to the presence of large
weak interfaces between adjacent materials. The strength and stiff ness discontinuity at the face sheet-core
interface results in large increase in shear stress. This stress concentration can be controlled by varying the core
properties through the thickness by using a functionally graded core. Sandwich construction is extensively used
for the skin and web of a horizontal axis wind turbine blade. For the design of very large wind turbine blades in
future, researchers have proposed extending the use of sandwich materials to the spar flange or spar cap.
Incorporating these changes, an accurate and efficient analytical modelling and structural analysis method for
wind turbine blade is necessary. The present work is aimed at developing an analytical model for such a wind
turbine blade cross section. The blade cross section is modelled as a sti ffened closed shell made of sandwich
composites. The modied Hamiltonian type Hellinger-Reissner variational principle is used to develop the
Hamiltonian canonical equation for the system. This method is based on a mixed variational principle that includes
the variations of both displacements and stresses. Finite element approximation is introduced only for the in-plane
variations of displacements and stresses, while the through-thickness distributions of them are obtained by using
the method of state equation. Solving these equations the coupled static and dynamics response of the stiffened
sandwich composite panel is investigated.
Skills :
Academics: Good mathematical and physical understanding of subjects.
Tools and Softwares: Ansys, Matlab, Mathematica, C++.
Basic skills: Active listening and active learning, Critical reasoning.
Social skills: Coordination, Service orientation, Social perspectiveness.
Research interests :
Modelling and analysis of composite structures
Modelling and analysis of sandwich structures
Modelling and analysis of stiffened panels
Functionally graded structures
Smart structures
Finite element analysis
Areas of interest : composite structures, Smart Composite Materials, Advanced structural mechanics,
Aerospace, Constitutive Modeling
Publications/Conferences :
NA
About me :
Calm and composed
Punctual
Trustworthy
Education :
B.Tech Mechanical Engineering, 2006-2010, College of Engineering Trivandrum
E-mail id : balavishnu88@gmail.com
Jintu K James
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Dr. Muruganandam TM
Title of thesis : Effect of geometry in a supersonic diffuser having shock oscillation across second throat
Thesis abstract : Supersonic diffusers appear in aircraft gas turbines, ramjets and wind tunnels etc. In such
cases, depending on the disturbances present upstream or downstream of the diffuser there can be shock waves
oscillations in the channel and the position of the normal shock wave decides the start or unstarts of the diffuser
flow. Therefore it has practical importance to understand the origin and consequence of these oscillations.There
are several factors which affect the oscillation such as shock wave-boundary layer interaction, mach number of
the flow, geometry of the section, etc. The dynamics of this shock oscillations can be studied experimentally by
varying the geometric profile of the diffuser.
Skills :
Flow visualisation techniques, Image processing,Lab view,
matlab, Solid works
Research interests :
High speed flows
Shock dynamics
Areas of interest : Gas dynamics
About me :
I am Jintu K James from Idukki in Kerala,currently doing MS(by research) in IIT Madras. The specialisation is
Gas Dynamics in Propulsion stream. I did my schooling in St. George's HSS Kattappana and joined for Bachelors
degree in Aeronautical engg.(AMAeSI) and passed with 66% marks.
I'm a passionate, optimistic & dedicated person who takes up responsibilities with enthusiasam and see to it that I
complete my tasks and assignments in time. I had enough patience to go through difficult situations of
experiments carried out here to get the results.
Education :
Bachelors degree in Aeronautical engg.(AMAeSI), 2006-2010
MS in Aerospace engineering, 2011-2013, IIT Madras
E-mail id : jintukjames@gmail.com
Manish Pandey
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Prof. S R Chakravarthy
Title of thesis : Numerical simulation of sandwich propellant combustion
Thesis abstract : In the recent years there has been a renewed interest on burning behavior of heterogeneous
solid propellant. In the modern day launch vehicles solid rocket are used as the primary boosters. Solid propellant
technology is also used in the strategic missiles. In spite of wide range of applications, complex combustion and
flow processes involved have posed considerable challenge. To get better understanding of the combustion
processes involved in heterogeneous solid propellant this study is carried out. The burning Heterogeneous Solid
propellant, a mixture of Ammonium Perchlorate (AP) and Hydroxyl Terminated Poly Butadiene (HTPB), is being
simulated for sandwich geometry of HTPB and AP using Finite Volume method. The equations governing the fluid
flow, energy and species balance are solved in the gas phase. The gas is assumed to follow the ideal gas
behavior. The gas phase field is coupled with the condensed phase energy balance through the connection
conditions at the regressing interface. The combustion in the Gas phase takes place through a three step, finite
rate, irreversible three step chemical reaction governed by an Arrhenius Law .The overall Chemical Kinetics
scheme for the surface pyrolysis and Gas phase reactions are similar to the one described in the BDP model
which involves Three step gas phase reactions and two surface pyrolysis reactions. The unsteady non-planar
regression interface is tracked by solving the Level set equation. Solid fuel is assumed to undergo pyrolysis at the
interface and converts into gas phase directly without melting. Simulation is carried out at constant background
pressure. Burn rate behavior of the propellant is studied at different background pressure value. As burning take
place interface is being tracked with time.
Skills :
Programing skillFortran
Software skillFluent
Techplot
Gambit
Research interests :
Multiphase flow
Combustion
Heat transfer
Computatioanl fluid dynamics
Surface tracking methods (Volume of fluid,Level set method)
Areas of interest : Computational Fluid Dynamics, Comustion simulation, Mutiphase flow, AERODYNAMICS
:
About me :
M.S scholar in aerospace department propulsion stream
from Gorakhpur uttarpradesh
intrested to work in the field of cfd
love to read motivational and relegious books,indian classical music
playing badminton
I would love to help socialy backward section of society
Iintrested in social service and politics
Education :
B.E Aeronautical Engineering,AMAESI
E-mail id : manishpandey.up@gmail.com
Ramesh Kumar
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Dr. K. V. Nagendra Gopal
Title of thesis : Coupled FEM-CFD aero-elastic modeling of 2 MW Horizontal Axis Wind Turbine (HAWT) Rotor
with initial curvature in Unsteady Aerodynamic Effects.
Thesis abstract : The increasing demand for higher efficient and lower cost of wind power has motivated the
design and manufacture of multi-megawatt horizontal axis wind turbines (HAWT) with large rotor diameter.The
wind turbine is a flexible structure whose components deform under the action of the aerodynamic loads Hence,
the aeroelastic response of the blades has a decisive influence on the overall system dynamics.The aeroelastic
response of the blade has to be modelled using improved unsteady aerodynamic models for effects such as
dynamic stall, Reynold's number effects and wake turbulence. This requires the use of numerical tools such as
CFD and FEM. The HAWT rotor blade has been designed using modified blade element momentum theory
(BEMT) of NACA 5 digit aerofoil. Dynamic stall of the wind turbine airfoil has been predicted using unsteady
aerodynamic ONERA model.Rotor model and structured mesh for both fluid and structure have been generated in
ICEM CFD. Stress analysis and modal analysis have been performed in the ANSYS using SHELL181 element.
Large eddy simulation (LES) turbulence model has been used for CFD analysis in FLUENT. To analyse the real
time situation,Two way coupled fluid-structure interaction (FSI) has been performed using ANSYS FLUENT and
Transient structure. At each time step, the aerodynamic load has been calculated by fluent and the corresponding
force has been transfered to the trasient structure on the fluid-structure interface results in displacement of the
rotor structure.Now, for this deformed rotor structure a new aerodynamic load has been calculated in the next time
step.This simulation has been performed for 10 sec for a wind speed of 10 m/s and at a rotor speed of 25 RPM
Skills :
Computing skills
Programming languages :
OS
:
Modeling :
Meshing :
Solver
:
CFD solver :
FEM solver :
Post processing:
MATLAB
Windows, Linux
CATIA, ICEM CFD, Design Modeler
ICEM CFD, HYPERMESH, STAR CCM+
FLUENT, CFX, STAR CCM+
ANSYS14, ABAQUS
Tecplot, CFD Post
Research interests :
Structural Dynamics and Aeroelasticity
Fluid Structure Interaction (FSI)
Turbulence Modelling
Unsteady Aerodynamics
Elasticity and Sandwich Composite Structures (Wind Turbine)
Areas of interest : FEM, CFD
Education :
MS Aerospace Engineering, 2012-13, Indian Institute of Technology Madras
BE Aeronautical Engineering, 2006-2010, The Aeronautical Society of India,New Delhi
E-mail id : rameshgedhar1101@gmail.com
S. Venkatesh
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Sunetra Sarkar
Title of thesis : Aeroelastic Stability and Fatigue Damage estimation of Wind Turbine Blades.
In the design of wind turbine structures, aeroelastic stability is of utmost importance. It
Thesis abstract :
becomes even more crucial when there are uncertainties involved in it. An airfoil with its pitch-plunge flexibility is
considered under potential flow. The potential flow model is justified as the classical flutter model involves
unseparated flow over the body so that inviscid assumptions are valid. The flow-field is simulated with an
unsteady vortex lattice method (UVLM) which considers a freely developing wake behind the airfoil, as a result the
unsteady aerodynamic load calculations are more accurate than the analytical models.
This unsteady flow
solver is combined with the structural dynamic governing equations to simulate the fluid-structure interaction
effects and calculate the system response after solving the combined equations in the time domain using a time
integration routine. Analytical models are based on the classical wake model of Wagner which considers rigid
wake and also simplifies the shape of the airfoil as a flat plate. The UVLM potential flow code has been validated
with earlier results available in the literature.
The values of the linear flutter speed predicted by using UVLM
code is in close agreement with that of the analytical fixed wake model. When structural nonlinearities are
present, the system exhibits a self sustained oscillation of constant amplitude called as Limit Cycle Oscillation
(LCO) even beyond the linear flutter speed. This nonlinear system is subjected to a horizontal gust with a von
Karman spectra using the well known model of Shinozuka and Jan. The phases in this random process model are
uniformly distributed random variables. In the present study, the phases have been generated only once and the
same values are used in all the realizations.
The vertical component of the gust is assumed to be zero.
Structural uncertain parameters have been modeled as Gaussian random variables. A spectral uncertainty
quantification tool called Polynomial Chaos Expansion is used to quantify the effect of uncertainty propagation
and calculate the response statistics. A non-intrusive version of the method using stochastic projection approach
is used to capture the response time histories and compute the response statistics at various time instants and
compared with standard Monte Carlo Simulation as a reference solution. The system response by both the
analytical and higher fidelity UVLM model subject to the same uncertainties are compared and an estimate of
fatigue damage is obtained from the uncertain response. In order to do that, rainflow cycle counting procedure is
used.
Skills :
Matlab, C, Fortran
Gambit, Pro-E, Fluent
Research interests :
Probabilistic Mechanics and Uncertainty Quantification
Unsteady Aerodynamics and Aeroelasticity
Nonlinear Dynamical Systems
Computational Fluid Dynamics
Areas of interest : AERODYNAMICS, Mechanics of Solids
Publications/Conferences :
S. Venkatesh, Ajit Desai and Sunetra Sarkar, Uncertainty Quantification of an Aeroelastic System using
Polynomial Chaos Expansion, NASAS XVII, IIT Kanpur, Septem ber 22-24, 2011
S. Venkatesh and Sunetra Sarkar, Uncertainty Quantification in a Fluid-Structure Interaction System
subjected to Random Wind, Joint Conference of the Engineering Mechanics Institute and 11th ASCE Joint
Specialty Conference on Probabilistic Mechanics and Structural Reliability (EMI/PMC 2012) June 17-20
2012, Notre Dame, USA.
S. Venkatesh, Ajit Desai and Sunetra Sarkar, Analysis of Aeroelastic System under Random Gust with
parametric uncertainties using polynomial chaos expansion, Proceedings of the ASME 2012 International
Mechanical Engineering Congress & Exposition, November 9-15, 2012, Houston, Texas, USA
About me :
I am passionate about music.
Love playing Cricket and Football.
Fond of Science and its evolution.
Love the subject of Astronomy and Astrophysics.
Education :
B.E. Mechanical Engineering, 2009, Pune University
E-mail id : svenky.87@gmail.com
Vinayak Malhotra
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Dr. Amit Kumar
Title of thesis : Effects of External Heat Sink and Heat Source onOpposed Flow Flame Spread over Thin Solid
Fuels
The study of flame spread phenomena is primarily driven by the need to have better fire
Thesis abstract :
safety, by means of enhanced understanding of mechanisms that control the spread rate and extinction. In almost
all of flame spread studies a single fuel sheet is taken to understand the flame spreading mechanisms and
flammability of solid materials. However, in practical situations spreading flame may interact with nearby cold
surfaces or nearby flames which will influence the flame spread rates and extinction limits. This has not been
investigated especially in microgravity where such interaction can have major implications.
Here in this work
flame suppression is investigated by placing a metal wire-mesh parallel to the fuel surface. This metallic mesh
acts as a flame extinguishing barrier by absorbing away heat from the flames and thus reducing heat feedback to
unburnt fuel. If the heat feedback is reduced sufficiently, pyrolysis of fuel will be reduced to the extent that flame
cannot self-sustain and therefore extinguishes. Likewise interaction of flames spreading over parallel sheets of
fuel is likely to alter the flame spreading behavior and flammability map from that of a single fuel sheet. A parallel
fuel sheet acts as heat source by releasing away heat from the flames and thus enhancing heat feedback to
unburnt fuel. This heat feedback increases pyrolysis of fuel resulting stronger flame.
An existing 2-D opposed
flow flame spread model of Kumar et al. comprising of solid phase model and gas phase model was adopted. The
existing numerical model was formulated with equations governing the physical processes and modeled with a
gas phase heat sink (a metallic wire-mesh) and a heat source (a parallel burning fuel) to analyze their effects on
the flame behavior, characteristics, flame spread rate and flame extinction. A simple apparatus was constructed to
carry out experiments extensively to validate results predicted by model.
Skills :
Programming
Engineering Software
Post Processing
OS
Fortran, C, C++
Fluent, Gambit, Matlab
Tecplot, Gnuplot
Linux, Windows
Research interests :
Computational Combustion
Heat and Mass Transfer
Propulsion
CFD and it's application to engine processes
Areas of interest : Combustion & Propulsion, Fluid & Thermal sciences
Publications/Conferences :
Paper Publication in Journal.
Vinayak Malhotra and Amit Kumar. Effect of Gas Phase Heat Sink on Suppression of Downward Flame
Spread over Thin Solid Fuels. International Journal of Advances in Engineering Sciences and Applied
Mathematics, Volume 4, 2012.
Vinayak Malhotra, Chenthil Kumar and Amit Kumar. Effect of Gas Phase Heat Sink on Suppression of
Opposed Flow Flame Spread over Thin Solid Fuels in Microgravity Environment. Journal of
Combustion [Accepted for publication]
International Conferences attended and papers presented.
Vinayak Malhotra, Chenthil Kumar and Amit Kumar, вЂњNumerical study on opposed flow Flame spread in
partial and elevated gravityвЂќ Proc. of International Conference on Theoretical, Applied, Computational
and Experimental Mechanics 2010.
Vinayak Malhotra and Amit Kumar вЂњEffects of gas phase heat sink on downward flame spread over thin
solid fuelsвЂќ Proc. of the 21st National & 10TH ISHMT-ASME Heat and Mass Transfer Conference
December 27-30, 2011, IIT Madras, India.
About me :
I am an aerospace engineer with specialization in propulsion and have enjoyed the basic undergraduate courses
in the area of fluid flow and heat transfer. Having stood in the top of around 7, 00,000 aspirants from different
engineering fields (All India Rank-36), I decided to do Master's in Aerospace Engineering because of the ongoing
live projects their sophisticated Labs. I got the opportunity to work on Flame spread in zero gravity and normal
gravity which had always fascinated me. My keen interest has helped me learn faster and do research properly
which has resulted in, One best research paper award (ISHMT-ASME 2011). I have published two International
Journal, one more is under review along with two international Conferences during the training.
I have close to three years of experience working with FORTRAN & C. I am well versed with packages like
ANSYS Fluent, Gambit etc. available for computations. Additionally, I have worked as project associate in
Department of Aerospace Engg, IIT Madras for one and a half year. This helped me to inherit significant abilities
in the area of project management, document preparation, meeting deadlines. I am a quick learner, good
performer both as team player and in independent environment and possess excellent communication
interpersonal and problem solving skills. I am an effective organizer and planner. My outgoing and friendly nature
allows me to interact well with other staff members at all levels.
Education :
M.S. (Aerospace)
: Indian Institute of Technology Madras, Chennai
B.E. (Aeronautical) : The Aeronautical Society of India, New Delhi
E-mail id : vinn99@gmail.com
Vivekanandan Jegadeesan
Master of Science by Research (MS)
Department of Aerospace Engineering
Guide : Prof. R. I. Sujith
Title of thesis : Experimental investigation of noise induced transition in thermoacoustic systems
Thermoacoustic instability has been observed in high intensity and high performance
Thesis abstract :
combustion systems. Under suitable circumstances, the fluctuating heat release rate can couple with the acoustic
field in combustion system and leads to sustained oscillations. The resulting oscillations are so intense, that they
damage the components associated with the system. The occurrence of thermoacoustic instability can be
classified in to two types: soft and hard excitations. When the oscillations start spontaneously in the combustion
chamber, the instability is said to be softly excited. In hard excitation a large amplitude disturbance has to be
imparted to initiate oscillation. In order to hard excite a combustion system the disturbance has to be above a
threshold level called triggering amplitude. This phenomenon is called as triggering. The occurrence of triggering
phenomenon has been observed to have a probabilistic nature. The probabilistic nature is attributed to the
randomness of the process that occur in the combustion system. The chances of noise triggering a system in to a
oscillatory state has been extensively studied in fields like physics, chemical and biological system. In the present
thesis, the effect of noise on the stability of a thermoacoustic system operating in a bistable region is
experimentally investigated. The thermoacoustic system chosen for investigation is a ducted non-premixed flame.
The system is excited by random fuel flow rate fluctuations which affects the system dynamics as parametric
noise. Under the influence of noise, the system undergoes transition from stable to oscillatory state. In particular,
transition is observed even when the amplitude of the noise is significantly less than the triggering amplitude of
the corresponding deterministic system. While triggering from noise of low amplitudes, phase portraits reveal that
the system evolves transiently towards an unstable periodic orbit, before eventually growing to a stable periodic
orbit. A stochastic stability map is constructed to represent the probability of the system to undergo transition. It is
also observed that the amplitude of the oscillatory state is affected by the noise level.
Skills :
Advanced velocity measuring techniques like PIV and LDV
High speed imaging techniques
Pressure measurements
LabVIEW (Medium Level Expertise)
ProE and Catia (Medium Level Expertise)
Matlab (Basics)
Research interests :
Gasturbine engines
Pulse Detonation Engines
Thermoacoustic instabilities
Flow diagnostics
Areas of interest : Combustion & Propulsion, Internal Combustion Engines
Publications/Conferences :
1) Jegadeesan, V. and Sujith, R. I. Experimental Investigation of Noise Induced Triggering in Thermoacoustic
System, presented at 34th International Symposium on Combustion, 2012, Warsaw, Poland. Published in
Proceedings
of
the
Combustion
Symposium
2012
(http://www.sciencedirect.com/science/article/pii/S1540748912000041)
2) Jegadeesan, V. and Sujith, R. I. Noise Induced Transitions in thermoacoustic systems : An experimental
investigation, LAP Lambert Academic Publishing ( 2012-10-09 )
About me :
I am energetic person with lots of enthusiasm to explore the unknown. I take initiatives on my own to solve
problem and always strive towards acheiving highest standard.
I have lead small teams during my graduate studies and achievied the goals and completed projects with highest
customer satifaction. I aways work towards achieving simple and innovative solution for the clients.
Being a M. S. Research scholar I am good at handling small projects on my own. I can plan and execute projects
on my own with less guidance from my superiors. I am also a field person who never hesitates to get my hand
dirty in an effort to solve a problem.
Education :
B. E MEchanical Engineering, 2004-2008, K. L. N. College of Engineering
M. S. Aerospace Engineering propulsion, 2009-2012, IIT Madras
E-mail id : vivekanandan.jegadeesan@gmail.com
Department of Applied Mechanics
Abhijit Biswas
Doctor of Philosophy (PhD)
Department of Applied Mechanics
Guide : Dr. M. Manivannan
Title of thesis : Ultratactile Sensitivity of Human Finger Pad
Thesis abstract : This research involves Identification of vibrotactile sensitivity threshold vs. frequency
characteristics for human finger pad and validating it using suitable model of human cutaneous sensory system
for high frequency stimulus beyond 1kHz. This work in turn involves development of high-frequency, highamplitude, wide-band nanoindenter also known as micro-vibrator or tactor. Apart from development of
experimental hardware this research also involves in optimization of psychophysics experimental schemes to
quantify the Ultratactile sensitivity of human finger pad.
Skills :
Hardware Proficiency :
Analogue & Digital circuit designing,
PCB-layout designing & development,
Embedded and PC-based automation and interfacing,
PIC-series & dsPIC-series, 8051 microcontroller interfacing,
Mechatronic system designing,
2-D drafting and 3-D modeling,
Bio-Signal processing.
Computer Languages known : C (Dos, Windows, Linux, Cross-platform embedded system), Python, Assembly
Language, COBOL.
Computer Package known : KICAD, AutoCAD, Orcad, Blender, GTK-Visual programming, Office, Open-source
utilities, MATLAB.
Software Proficiency : Data Structure, Numerical computation, Neural-Network programming, 3-D modeling &
animation, Hardware & Graphics programming, peripheral system interfacing in DOS, Windows & Linux.
Research interests :
Haptics and Virtual-Reality
Instrumentation
Embedded-System and Automation
Power-Electronics
Actuator and Driver Design
Biomedical Engineering
Psychophysics
Rehabilitation Engineering
Robotics
Areas of interest : Hardware and software development, Teaching, research, psychology, music, sports
Publications/Conferences :
A. Biswas and M. Manivannan, вЂњUltra-tactile sensitivity of human finger pad,вЂќ IEEE Trans. Haptics,
submitted for publication.
A. Biswas and M. Manivannan, вЂњA Layered Vibrotactile Sensory-Transduction-Model for Estimating
Stimulator Power Rating,вЂќ IEEE Trans. Haptics, submitted for publication.
A. Biswas, D.N. Tibarewala, S. Biswas, вЂњArray based tactile vision for the blind people using multidirectional ultrasonic scanning of environment,вЂќ India patent, 332/KOL/2008, 28-Aug-2009 (published).
D. Das, A. Biswas, M.K. Pain, S. Biswas, D. Sarkar, P.P. Sarkar, "Controlling of Joints with Multiple
Degree of Freedom", in IConTiMES, JISCE Kalyani, 2008, pp. 102-111.
A. Biswas, "Menu based DOS programming to recycle old PC in to a low cost data acquisition and
analysis system", in NGE, NSEC Kolkata, 2008.
A. Biswas, S. Biswas, D. Sarkar, P.P. Sarkar, "Sensor for Measuring Angle in Space", in NCS, TIET
Patiala, 2005, pp. 42-43
About me :
Like to build hardware and software, think for realizing the secrets of nature and human mind and wish to build
career in teaching, research and technical-consultancy.
Education :
M.E. Biomedical Engineering, School of Bio-Science & Engineering, 2006-2008, Jadavpur University.
B.Tech. Electronics & Instrumentation, Department of Engineering & Technological Studies, 2002-2006,
University of Kalyani.
12th Science, Ramkrishna Mission Vivekananda Centenary College, 2000-2002, W.B.C.H.S.E
10th Ramkrishna Vivekananda Mission Vidyabhavan, 2000, W.B.B.S.E.
E-mail id : abhi.tech.2006@gmail.com
Kanakapriya K
Doctor of Philosophy (PhD)
Department of Applied Mechanics
Guide : Manivannan M
Title of thesis : Design and Development of a High-FIdelity Mannequin for diagnosing and treating Myocardial
Infarction
Thesis abstract : MI cases growing in India, frequent misdiagnosis especially in smaller hospitals and for older
patients. Coming up with a Mannequin to show the specifics of diagnosing, classifying and offering initial
treatment for MI.
Skills :
Technical Writing, Software Development in Java, C++, Microprocessor Programming, System Design
Research interests :
Medical Training Mannequins
Biomedical Instrumentation
Areas of interest : software development, mannequin design, simulations
Publications/Conferences :
1. K Kanakapriya, M Manivannan, Blood Pressure measurement for Myocardial Infarction diagnosis in High
Fidelity Mannequins, The International Conference on Advances in Computer Science and Electronics
Engineering - 2012.
2. K Kanakapriya, M Manivannan, CPR Module with Variable Chest Stiffness in High Fidelity Mannequins,
22nd CIRP Design Conference, Indian Insitute of Science, Bangalore, Mar 28-30 - 2012
3. Kanakapriya Kalyanasundaram, Manivannan M and Alekhya Mandali, ECG Simulation for Myocardial
Infarction Diagnosis in High Fidelity Mannequins, 2011 Annual IEEE India Conference (INDICON 2011),
16-18 December 2011, Hyderabad, India
About me :
Wide variety of experiences in software development in multiple platforms and languages, hardware development,
Excellent communication and technical writing skills, quick learner
Education :
B E M S Ramaiah Inst of Tech
M S Uni of Texas at Austin
E-mail id : kanakapriya@gmail.com
P. Mahalakshmi
Doctor of Philosophy (PhD)
Department of Applied Mechanics
Guide : Dr. M. Ramasubba Reddy
Title of thesis : Investigating the Effects of Spectral Energy and Temporal Fine Structure for Improved Speech
Perception Using an Acoustic Simulation Model Developed for Cochlear Implants.
Thesis abstract : Cochlear Implants (CI) are surgically implanted biomedical devices that can provide hearing to
severely deaf people by direct stimulation of the auditory nerve, electrically. Current CI speech processors do not
convey phase information, which is important for perceiving music and for hearing in noisy environments. This
thesis discusses a new acoustic simulation model for CI, that extracts the вЂ�envelopeвЂ™ by continuous-interleaved
sampling (CIS) principle and вЂ�temporal fine structureвЂ™ cue (phase information) by Hilbert transform. The dominant
channels are identified from the filter bank outputs and subjected to temporal analysis. The amplitude estimates
are derived through rectification and low-pass filtering. By Hilbert transform, the temporal fine structure is
extracted through formant peaks in the signal which contributes for speech intelligibility. After band pass filtering
the speech signal, carrier signals that are specific to the band outputs, are constructed using biphasic pulses in
the extracted fine structure which has greater peaks. The filtered outputs from all the channels are subjected to
amplitude-modulation using the carrier pulses and the synthesized speech is generated by summing all the
modulated outputs. 15 phonemes are analyzed for its envelope and phase information and the recognition rates
are estimated with 15 listeners. The simulation results indicated that this model produced significant
improvements in the recognition scores of vowels and consonants. The proposed model should be helpful for
developing advanced speech processing strategies and improving the speech perception of CI users.
Skills :
Platforms: Windows 2000/XP/Vista/7
Programming Languages: C, Assembly Language
Application Softwares: Matlab, Scilab, Wavesurfer, Praat, Labview
Research interests :
Speech Signal Processing
Cochlear Implants
Areas of interest : Learning; Meeting the learning needs of students; To serve as academic advisor to students;
To coordinate departmental/institutional administrative activities and to promote excellence in teaching and
research; New technology, Cooking, Travelling, Listening to Music
Publications/Conferences :
P. Mahalakshmi, M.R. Reddy, "Cochlear Implant Acoustic Simulation Model based on Critical Band
Filters", Int. Jl. of Electronics and Commun. Engg. & Tech., Vol.3, No.2, July 2012, pp. 116-129.
P. Mahalakshmi, M.R. Reddy, "Speech Processing Strategies for Cochlear Prostheses - The Past,
Present and Future: A Tutorial Review", Int. Jl. of Advanced Research in Engg. & Tech. (In Press).
P. Mahalakshmi, M.R. Reddy, "Investigation of the Envelope and Phase Information for Improved Speech
Perception Using an Acoustic Simulation Model for Cochlear Implants", IEEE EMBS Conference on Biomedical Engineering and Sciences, Malaysia, To be held in December 2012. (Accepted).
P. Mahalakshmi, M.R. Reddy, "Signal Analysis by Using FIR Filter Banks in Cochlear Implant Prostheses",
Proc. of IEEE Int. Conference on Systems in Medicine and Biology, IIT-Kharagpur, December 2010, pp.
266-271.
P. Mahalakshmi, M.R. Reddy, "The Coding of Sound for a Cochlear Prostheses", Proc. of the 8th Annual
Conference of Cochlear Implant Group of India Conference, Chandigarh, November 2010, pp.108.
About me :
Hard-working nature with high motivations.
Received "Best Teacher Award" thrice at VIT University, for contributions towards teaching and mentoring
students.
Co-authored a paper entitled "Signal Processing Techniques for Multi-channel Cochlear Implants", which
received the "second best project award" in the Tenth Medical Science Conference on Deafness, at the
International Research Institute for the Deaf, 2002.
Life Member of Biomedical Engineering Society of India; Systems Society of India.
Education :
B.E. in Electronics and Communication Engineering, 1991-1995, IRTT, Erode, TamilNadu
M.Tech. in Biomedical Engineering, 1998-2000, IIT Madras
E-mail id : maha_50@yahoo.com
Rajesh P Nair
Doctor of Philosophy (PhD)
Department of Applied Mechanics
Guide : Prof.C.Lakshmana Rao
Title of thesis : Discrete Element Method for Impact Problems
Thesis abstract : Discrete Element Method (DEM), an explicit numerical scheme to model mechanical response
of solid and particulate media. This DEM is used to study the ballistic impact of a projectile hitting the target and
its post impact behavior. In the current study, 1-D DEM is used to obtain the depth of penetration for blunt copper
bullet impacting thick aluminium target. A new type of discrete element- a Quadrilateral element is introduced in
2-D DEM. Ballistic impact simulation of blunt and conical steel bullet impacting thin concrete target is being
carried out using Quadrilateral Discrete Element Method. Both 1-D and 2-D DEM are validated with available
results in literature.
Skills :
MATLAB, ABAQUS, NISA, AUTOCAD, C, FORTRAN
Research interests :
Discrete Element Methods
Impact Mechanics
Computational methods in Solid Mechanics
Areas of interest : Solid Mechanics, finite element analysis, Computational Mechanics
Publications/Conferences :
Journal Papers
Rajesh P Nair & C LakshmanaRao(2012), Simulation of failure of elastic beams subjected to impact
load using quadrilateral discrete element method,(Manuscript to submit in "International Journal for
Numerical Methods in Engineering").
Rajesh P Nair & C LakshmanaRao(2012), Simulation of depth of penetration during ballistic impact on
thick targets using a 1-D discrete element model,Sadhana,37, pp.261-279
International Conference Papers
Rajesh P Nair, C LakshmanaRao&B N Rao,One-dimensional approach to ballistic impact problems
using discrete finite element method, ICTACEM, December 27-29, 2007, IIT Kharagpur.
Rajesh P Nair, Rohit Deshmukh and C Lakshmana Rao,Simulation of Penetration During Ballistic
Impact Using 1-D DFEM, International Conference on Multiscale Modeling and simulation, January
2-4,2008, IISCBanglore.
M D Ghouse, Rajesh P Nair, C LakshmanaRao&B N Rao, Numerical modeling of failure in materials,
Indo-Russian Workshop on Topical problems in Solid Mechanics, November 11-14, 2008, BITS
Pilani,Goa.
Rajesh P Nair &C LakshmanaRao, Elastic Response of Cantilever beam using QDEM, ICCMS,
December 1-5,2009, IIT-Bombay.
Rajesh P Nair, Anoop N Honnekeri&C LakshmanaRao, Numerical simulation of Ballistic Impact on
thick targets using Discrete Element Method-1D and 2D models, International Conference on Composites
for 2t Century: Current & Future Trends, January 4-7,2011,IISC Banglore.
Vineet Kumar Reddy K, Rajesh P Nair and C LakshmanaRao, Numerical Modeling of Response of
Beams Subjected to Blast Loading, ICCMS,December 10-12, 2012,IIT Hyderabad (Abstract accepted) .
Rajesh P Nair & C LakshmanaRao, Simulation of failure of a cantilever beam subjected to impact load
using QDEM, ICCMS,December 10-12, 2012,IIT Hyderabad (Abstract accepted).
Rajesh P Nair &C LakshmanaRao, Simulation of failure of a fixed beam subjected to impact load using
QDEM, ASME-International Mechanical Engineering Congress & Exposition, November 9-15, 2012,Texas,
USA (Full paper Accepted).
About me :
I wish to take up a research oriented career in the field of analysis of solids & structures and contribute further to
the frontiers of knowledge in this field for the development of the organization and the society.
Education :
PhD, Applied Mechanics, 2006-2013, IIT Madras
M.Tech., Computer Aided Structural Analysis and Design, 2003- 2005, Department of Ship Technology,
CUSAT
B.Tech., Mechanical Engineering,1998- 2002, LBS College of Engineering
E-mail id : rajeshpnair@gmail.com
Akhilesan S
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Prof.Lakshmana Rao, Dr. Susy Varughese
Title of thesis : Electromechanical Response of Conducting Polymers
Thesis abstract : Polyaniline (PANI) an electronically conducting polymer, and its charge transfer complexes are
interesting engineering materials due to their unique electronic conductivity, electrochemical behavior, low raw
material cost, ease of synthesis and environmental stability in comparison with other conjugated polymers. The
main disadvantage of PANI is its limited processability. Blending of conducting polymers with insulating polymers
is a good choice to overcome the processability problem. In this study a solution-blend method is adopted to
prepare conductive polyaniline/polyvinyl alcohol (PANI/PVA) blend films at various blend ratios. Interest in
applications for polyaniline (PANI) has motivated investigators to study its electro mechanical properties, and its
use in polymer composites or blends with common polymers. The work described here looks at the
uniaxial/Biaxial deformation behavior of the conducting polymer films and the anisotropic dependency of electrical
conductivity of the blend films exposed to static and dynamic loading conditions. The relation between mechanical
strain, electrical conductivity and film microstructure is investigated on PANI/PVA blend films.
Skills :
MATLAB
ANSYS
Strain Measurements Using Digital Image Tracking
Conducting polymer synthesis
FRP Manufacturing, Testing and Analysis
Research interests :
Active Polymers
Composite Materials
Material Modeling
Solid Mechanics
Finite Element Analysis
Areas of interest : Conducting Polymers, Composite Materials, Material Modeling, Solid Mechanics, finite
element analysis
Publications/Conferences :
1. ASME 2012 conference on Smart Materials, Adaptive Structures and Intelligent Systems (Stone Mountain,
USA September 19-21, 2012)
вЂњElectromechanical behavior of conductive polyaniline/poly (vinyl alcohol) blend films under uniaxial loadingвЂќ
SMASIS2012-7937
2. Third Asian Conference on Mechanics of Functional Materials and Structures (IIT Delhi, December 5-8, 2012)
вЂњBiaxial Mechanical Response of polyaniline/poly (vinyl alcohol) blend films under monotonic and cyclic loadingвЂќ
ACMFMS2012-10024
About me :
Akhilesan S, MS (Applied Mechanics) CGPA (8.6/10)
I would like to take up a career as an engineer in an esteemed organization, where, I can use the knowledge,
skills and ideas to the very best level for the development of the organization and the society.
Education :
MS
BE/AMAeSI
Applied Mechanics, IIT Madras
2011-2013
Aeronautical Engineering, Aeronautical Society of India
E-mail id : akhilesan@gmail.com
2004-2008
Amit Kumar Chauhan
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : BSVP PATNAIK, BVSSS PRASAD
Title of thesis : THERMAL HYDRAULICS OF TUBE BUNDLES
Thesis abstract : A numerical study of single phase flow using CFD in annular channel and tube bundles. The
hydrodynamics and thermal characteristics of the coolant is analyzed in mechanically distorted geometry of
annular channel or tube bundle.
Skills :
ANSYS
FLUENT
Tecplot
Research interests :
FLUID MECHANICS
HEAT TRANSFER
CFD
THERMAL HYDRAULICS
Areas of interest : Fluid Mechanics, Heat transfer, Thermal Hydraulics, CFD
Publications/Conferences :
Numerical heat transfer in eccentric annular channel
About me :
Am a research sscholar working in "thermal hydraulics in tube bundles" CFD.
Education :
B.Tech Mechanical Engineering, 2005-2009, SASTRA University, Thanjavur
M.S. Applied Mechanics, 2010-2012, Indian Institute of Technology Madras
E-mail id : amitchauhanmecher@gmail.com
Bharat Pokale
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. Sayan Gupta
Title of thesis : Damage Estimation in Vibrating Beams from Time Domain Experimental Measurements
Thesis abstract : The problem of damage detection in beams from time domain vibration measure-ments is
investigated. A cantilever beam subjected to dynamic point loadings is considered. A measurable damage in the
form of a notched crack is introduced into the beam. Using Bayesian principles, a particle filtering algorithm
applied on the ex-perimentally measured tip accelerations is used to estimate the changes in damping and the
localized reductions in the flexural rigidity of the beam at various loca-tions. Subsequently, the size and location of
the crack is estimated using principles of fracture mechanics and particle filtering. Strategies onreducing the
associated computational costs are also discussed.
Education :
B.E Aeronautical Engineering, AMAeSI, Dec-2009
MS Applied Mechanics, 2010-2012
E-mail id : bhrtpkl@gmail.com
Cerine Lal
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr N. Sujatha
Title of thesis : Laser based Siganl and Image Analysis for assessment of blood flow.
Thesis abstract : Laser based techniques provide non invasive ways of assessing tissue microcirculation.Laser
doppler and laser speckle are the two techniques used to assess microvascular perfusion using backscattered
light.This research work involves analysing the speckle images/doppler signals by speckle contrast technique and
fractal analysis so as to quantitatively and qualitatively describe the changes in blood flow in diseased conditions
as well as using flow/tissue simulating phantoms.
Skills :
Application Software:MATLAB,R,SCILAB
Programming languages: C,Assembly Language
Research interests :
Biomedical Optics
Biomedical Signal Processing
Instrumentation
Areas of interest : Biomedical image and signal processing, Instrumentation, Biomedical Optics
Publications/Conferences :
Sujatha Narayanan Unni,Cerine Lal, 'Laser based signal and image fractal assessment for assessment of blood
flow',Proceedings of the SPIE, Volume 8427, pp. 84272M-84272M-7 (2012).
About me :
I am determined and hardworking.Love to explore new ideas and apply new techniques in fields of interest. A
good listener and good team mate who enjoys working in group as well as individually.Quick in grasping new
concepts and also able to empathize with others.
Education :
M.S in Biomedical Engineering ,2011-2013,IIT Madras.
B-Tech - Applied Electronics and Instrumentation ,2006-2010,M.G University,Kerala.
XII(Science)- Bhavans Varuna Vidyalaya,2004-2006,Kochi.
X-Bhavans Varuna Vidyalaya,,2003-2004,Kochi.
E-mail id : cerinelal@gmail.com
Immanuvel Paul
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr.K.Arul Prakash & Dr.S.Vengadesan
Title of thesis : Numerical analysis of effects of angle of attack, axis ratio and Reynolds number on fluid flow and
heat transfer across elliptic cylinders using parallel algorithm based immersed boundary method
Thesis abstract : Fluid flow and heat transfer characteristics of flow around slender and bluff bodies is of greater
interest as it has interesting flow behaviours as well as because of it's wide range of applications. Though the
literature on flow around circular or square cylinder is vast, many enginineering applications like flow past aircraft
wings, missiles, rotor blades require the body to be modeled as flow past an elliptic cylinder. The literature on
these kind of non-canonical problems is very limited. This study aims to unreveal the fluid flow and foced
convective heat transfer characteristics of flow around an inclined elliptic cylinder. Parameters considered in this
study are (i)axis ratio, (ii) angle of attack (iii) Reynolds number. Since this study require change in grid for a
change in axis ratio/angle of attack, an efficient Cartesian grid technique called Immersed Boundary Method
which eliminates the need of new grid is used for the simulations. A large computaional domain is ued to capture
the secondary vortex shedding behind slender elliptic cylinders. A parameter space graph is constructed to reveal
the dependence of axis ratio, angle of attack and Re on vortex shedding. Integral parametrs of fluid flow and heat
transfer are computed. Useful functional relationships are obtained for every integral parameters with respect to
axis ratio, angle of attcak and Re. An attempt is made to parallelize this solver using Message Passing Interface
(MPI) which is an efficient parallel algorithm.
Skills :
Efficient programming skills in C++ and Fortan
Hands on experinece in packages such as Fluent, Gambit, Tecplot, Matlab, Mathematica
Have worked in different platforms: like Linux and Windows.
Hands on experience in modern parallel algorithms such as MPI and CUDA.
Excellent communication skills
Research interests :
Computational Fluid Dynamics and Heat Transfer
Immersed Boundary Methods
Parallel computing
Fluid Mechanics & Aerodynamics
Fluid-Structure interaction
Areas of interest : Numerical Algorithms, Computational Fluid Dynamics and Heat Transfer, Turbulence
Modelling
Publications/Conferences :
Journals:
Immanuvel Paul, K.Arul Prakash and S. Vengadesan, Numerical analysis of fluid flow characteristics past
an elliptic cylinder: A parametric study. (Submitted to International Journal for Numerical Methods in Heat
and Fluid Flow).
Immanuvel Paul, K. Arul Prakash and S. Vengadesan, The effects of angle of attack, axis ratio and
reynolds number on forced convective heat transfer accross an elliptic cylinder with constant temperature
and constant heat flux boundary. (Under consideration for Numerical Heat Transfer, Part-A)
Conferences:
Immanuvel Paul, K. Arul Prakash and S. Vengadesan, Numerical Study of flow past an inclined elliptic
cylinder using Immersed Boundary Method, 38th National Conference on Fluid Mechanics and Fluid
Power (NCFMFP-2011, Bhopal, India, December 15-17, 2011.)
About me :
Having gained a good knowledge in numerical progamming for fluid flow and heat transfer problems, I wish to
work in a challenging environment where I can learn further as well as give my full effort for the benefit of the
employer. Ambitious, smart, well organized, punctual, quick learning, team player, great manners and nice
presence.
Education :
Post Grduate:
University
: Indian Institute of Technolgy Madras
Degree appeared for : Master of Science (by Research)
Class
: 2013
CGPA
: 9.4
Under Graduate:
University
: Anna University, Chennai
Degree appeared for : Bachelor of Engineering (B.E) in Aeronautical Engineering
Class
: 2010
Percentage
: 80% (First Class with Distinction)
HSC:
Board
Name of School
Class
Percentage
SSLC:
Board
Name of School
Class
Percentage
: Tamil Nadu State Board
: PK Higher Secondary School
: 2006
: 89%
: Tamil Nadu State Board
: PK Higher Secondary School
: 2004
: 97.2% (3rd rank in Virudhunagar district)
E-mail id : immanuvelpaul@gmail.com
N Ganesh
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. Sayan Gupta
Title of thesis : Estimating the rain-flow fatigue damage in wind turbine blades using polynomial chaos
Thesis abstract : Modern wind turbine blades are slender structures whose increased flexibilities have led to
unforeseen aero-elastic instabilities leading to failures. In this study, the turbine blade is modeled as a twodimensional airfoil and is subjected to random loading. The airfoil is assumed to oscillate in rotational as well as
translation degrees of freedom. The loading is assumed to be stationary and Gaussian. The fatigue damage due
to this loading is described through the rain-flow cycle counting method. An approach based on polynomial chaos
expansion is used to obtain the response of the nonlinear oscillator.
Skills :
MATLAB
Research interests :
Stochastic modelling
Uncertainty quantification
Fatigue damage estimation
Probabilistic risk assessment
Areas of interest : .
Publications/Conferences :
N. Ganesh, Sayan Gupta, " Estimating the rain-flow fatigue damage in wind turbine blades using
polynomial chaos", International symposium on engineering under uncertainty: Safety assessment and
Management (ISEUSAM), January 2012.
About me :
.
Education :
B. E Mechanical Engineering, 2010, Anna University, Chennai.
E-mail id : nganesh22@gmail.com
Pavan D Bonkinpillewar
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. Mahesh V Panchagnula
Title of thesis : Experimentation and simulation of wet granular discrete material flow
Thesis abstract : Granular material is collection of discrete macroscopic particles. Behaviors of the granular
material are quite different from the behavior of classical fluid and solid materials. A granular flow shows many
interesting phenomena. In this research work behaviors of wet granular material are studied by experimental and
simulation. Simulations are performed by writing computation code, which based on discrete particle method, and
also performed experiments.
Skills :
Programming language C, matlab
Computation fluid mechanics (CFD) fluent, Gambit, CFX, tgrid
Solid modeling
Research interests :
Granular flow
Computation fluid mechanics
Multiphase flow, surface wetting etc.
Areas of interest : CFD, Granular flow, Multiphase flow, surface wetting
About me :
I born and brought up in small village near Yavatmal, Maharashtra. I have completed my Bachelor of Engineering
in Mechanical engineering from Nagpur University, and pursuing MS in fluid mechanics, IIT Madras. About my
family, my father is farmer, my mother is homemaker, and I have elder sister. My Hobbies are playing Cricket,
chess etc.
My strength is I have positive attitude, quick learner and ability to understand problem.
Education :
B.E in Mechanical Engineering, 2004-2007, Nagpur University, Maharashtra
M.S in Fluid Mechanics 2011-2013, IIT Madras
E-mail id : pavan.pillewar@yahoo.com
Ravi Kumar Pulipaka
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr K ARUL PRAKASH
Title of thesis : NUMERICAL SIMULATION OF INCOMPRESSIBLE VISCOUS FLOW FOR INVESTIGATING
INSECT FLIGHT DYNAMICS
Thesis abstract : The present study stems from our interest in understanding the insect fluid dynamics relevant
to Flapping Micro-Air Vehicles (FMAVs). Natural flyers and swimmers, which have evolved over millions of years,
represent one of natureвЂ™s finest locomotion experiments. The insects use the flapping wings forward flight and
even for hovering also. Understanding the unsteady aerodynamics of the flapping wings of insects which results in
the saccade maneuver would be extremely valuable to designers in their attempts to create vehicles capable of
obstacle-avoidance, stealth and gust response.
A numerical study of two dimensional wing(of different crosssections) in sinusoidal plunging and pitching motion(individually and combined) was carried out to examine the
effect of flapping frequencies, plunge amplitude, phase difference between pitch and plunge motion, wing
thickness and finally location of pitching axis on its aerodynamic characteristics at low Reynolds number. Physical
parameters in terms of the instantaneous and mean values of lift, thrust coefficients and propulsive efficiency
were discussed in detail. Additionally, Lift coefficient was also calculated using analytical models.
Skills :
Programming - MATLAB, FORTRAN
Softwares - Auto Cad, Ansys, Gambit, Fluent, Tecplot, Catia.
Operating Systems - Windows and Linux.
Research interests :
FLUID STRUCTURE INTERACTION
INSECT FLIGHT DYNAMICS
Areas of interest : Fluid dynamics, Analyst
Publications/Conferences :
Ravi kumar.P and K. Arul Prakash, Effect of wing cross вЂ“ section on thrust of a flapping wing, proc.
International Conference on Bluff body flows, Blubof2011- IUTAM, IIT Kanpur, December 12-16, 2011.
Ravi kumar.P and K. Arul Prakash, Numerical study of the effect of thickness ratio and Reynolds number
on laminar flow past Rectangular cylinder, proc. Symposium on Applied Aerodynamics and Design of
Aerospace Vehicle (SAROD 2011), Bangalore, November 16-18, 2011.
Ravi kumar.P and K. Arul Prakash, Numerical study on the effect of pitching axis location on a flapping
airfoil, proc. 13th Annual CFD Symposium, Bangalore, August 11-12, 2011.
Ravi kumar.P and N. Srinivasa Babu, Thermomechanical analysis of a generic aero engine disc, proc.
National conference on Aeronautical Engineering (NCAE-09), August 14-17, 2009.
About me :
Hi! I'm Ravi from Tenali (a town in India) Pursuing M.S. (By Research) in APPLIEDMECHANICS DEPARTMENT.
I did my B.Tech (AEROUNAUTICAL) in Malla Reddy College of Engineering and Technology, Secunderabad,
secured 81.5% and feel privileged to pursue my Masters in this prestigious institution.
IвЂ™m a passionate, optimistic & dedicated man who takes up responsibilities with utmost enthusiasm and see to it
that I complete my tasks and assignments in time. My optimistic and planned approach in things I do is what
driving me towards my success. I believe in вЂњbetter late than neverвЂќ which helps me to regain the movement,
when my plan fails and I won't hesitate to go an extra mile and contribute my efforts, in getting things done in time.
I love Chess, and also participate in other games, that helps to maintain fitness. I do selectively read books mostly
fiction & fantasy вЂ“ Harry Potter, Narnia kind of, some cartoons occasionally too!
I come from Orthodox Brahmin family born in Tenali and brought up in the multi-cultured, multi-cuisine flavours of
various cities in INDIA. IвЂ™m the elder son of my parents. IвЂ™ve a younger brother who is currently working in BANK
OF AMERICA (BPO SECTOR) and he has been my joy and a good friend for everything under the sky.
Well, thatвЂ™s it!
Education :
MS (By Research) in FLUID MECHANICS, 2010-2013, IIT Madras.
B. Tech Aeronautical Engineering, 2005-2009, Malla Reddy College of Engineering and Technology,
Secunderabad.
E-mail id : pulibabu@gmail.com
Ravindra B Patil
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr S Ramakrishnan
Title of thesis : Auto Stenosis Detection in Angiographic images and quantitative analysis of the lumen diameter
for classification of cardiac diseases.
Thesis abstract : The work carried out is focused on development of auto detection algorithm without clinician
intervention to deliniate the vessels in the angiogrphic images . Quntitative study of artery blockage is undertaken
to classify the cardiac diseases based on the pattern recognition techniques .Processing speed and the efficiency
of the algorithm is compared with standard bench marks.
Skills :
C#,.Net , C++, C , XML, Matlab , Design Patterns .
Research interests :
Medical Image processing on Angiographic Images for stenosis detection.
Application of Pattern Recognition techniques on Medical Images
Magnetic Resonance and Diffusion Tensor Imaging .
Algorithm development and Prototyping in Imaging and Signals
Areas of interest : Image Processing Algorithms, Signal Processing, Pattern Recognition techniques
Publications/Conferences :
Ravindra Balasaheb Patil, Preetham Nagaraja Murthy ,"Automated Cardiac Status Determination System",Patent
No:20100286543,November 11, 2010
About me :
Self driven
Good communication skills.
Education :
BE(Electronics and Communication) Vishweswaraya Technological University ,Belgaum(VTU), Karnataka
2004-2008
MS:IIT Madras , Biomedical group,2012E-mail id : ravipatil3354@gmail.com
Sandeep Shashi Kumar
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. K. Arul Prakash
Title of thesis : Numerical studies of turbulent fluid flow and heat transfer in a plane asymmetric diffuser
Thesis abstract : The asymmetric diffuser has many industrial and engineering applications, thus making the
study of its fluid flow and heat transfer characteristics imperative. The simulation of the flow becomes more
challenging when the flow is turbulent and it is desirable that the turbulent charateristics are predicted in a time
efficient manner. In the present study, firstly, a SUPG finite element based Navier Stokes solver for constant
density laminar/turbulent flow in 2D/3D geometry is developed and validated. It is followed by the testing of the
three popular k-epsilon models ,i.e., Standard, RNG and Realizable, for their suitability to predict the aforesaid
flow. The k-epsilon model, found most suited, is finally used to perform parametric study of flow and dimensional
parameters affecting the fluid flow and heat transfer characteristics.
Skills :
Proficient in FORTRAN, C and C++
Research interests :
Computational Fluid Dynamics (Algorithms and Applications)
Turbulence (Fundamentals, Modelling and Simulation)
Areas of interest : Algorithms, Computational Mechanics, Turbulence
Publications/Conferences :
Kumar, S.S., and Prakash, K.A., "Comparative analysis of k-epsilon models based on their prediction in a plane
asymmetric diffuser ", Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, Surat, December
13-15 2012
About me :
I love challenging problems, especially those that are algoritmic in nature. I am an adamant researcher and
despise following pre-existing algorithms or methods. Although I seldom succeed, I always try to innovate. Trivial
problems make me lazy. I dont mean that I am too smart to be doing it, it is just that they do not intrigue me.
Research is my second love and I hope that my MS was not just a honeymoon period.
Education :
B.E. Mechanical Engineering, 2006-2010, Swami Sarvanand Giri Panjab University Regional Centre, Hoshiarpur,
Punjab
E-mail id : sandeep.shashi@hotmail.com
Saurav Agrawal
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. Abhijit Chaudhuri
Title of thesis : Numerical Simulation of Oscillating slender structures- A two way fluid structure interaction
Thesis abstract : The computation of fluid forces on a structure is one of the primary task in its design
considerations.It is also one of the most difficult tasks since it involves the complexity due to the interaction of flow
with the structure continuously.The current study aims at modelling such complex flow systems to analyse the
effect of fluid forces on the structure and its deformation with different influencing parameters such as damping,
structural stiffness, mass ratio.
Skills :
CFD and Modellling Softwares
Ansys : Fluent, ICEM CFD,CFX
Star CCM
Auto CAD, Tecplot360
Programming Languages:
C , Matlab
Operating System:
Linux, Windows .
Worked on Super Computers
Research interests :
Computational Fluid dynamics
Fluid Structure Interaction
Alternate Energy- Wind turbines
Areas of interest : Computational Fluid Dynamics, Fluid structure interaction, Structural Health Monitoring
Publications/Conferences :
Saurav Agrawal., Dr Abhijit Chaudhuri.,"Investigating the effects of controlled biaxial harmonic oscillations on the
wake dynamics of a circular cylinder", 9th European Fluid Mechanics Conference,Rome,September 2012
About me :
I aspire to build a career in an organization that would help me develop my skills and passion to transform them
into commendable work that is of sustained value for the organization . Accepting challenges keeps me intact
with the learning process and motivates me to move a step ahead towards my professional career.
Education :
B.Tech in Aeroautical Engineering, 2006-2010, Aeronautical Society of India
M.S. in Applied Mechanics Department(Fluid Mechanics), 2011-3013, IIT Madras
E-mail id : saurav.agrawal727@gmail.com
Shaafi Mohamed K
Master of Science by Research (MS)
Department of Applied Mechanics
Guide : Dr. S. Vengadesan
Title of thesis : Numerical Study on Influence of Wall Proximity on Effectiveness of Vortex Generator in Vortex
Suppression and Heat Transfer Enhancement using Immersed Boundary Method
Thesis abstract : Many control strategies have been proposed in order to suppress vortex shedding and to
enhance heat transfer. Since the vortex dynamics and its associated flow and heat transfer characrteristics is very
much sensitive to incoming flow condition (Incoming shear, turbulence intensity etc), the effectiveness of control
methods also varies. In our study we have investigated the effectivness of vortex generators in the presence of
plane wall. Presence of wall creates boundary layer and induces shear in the flow and when the bluff body
(circular cylinder) is immersed in this highly viscous boundary layer, the vortex shedding pattern is completely
changed. As reported in the previous literatures, upstream placement of a stationary cylinder or a rotating
cylinders suppresses the vortex sheeding and reduces drag. Effectiveness of two vortex generators, namely
stationary cylinder and rotating cylinder have been investigated in the presence of plane wall at Re = 100. This
numerical study is carried out using finite difference based immersed boundary method.
Skills :
Programming Skils : C++ (openMP, Basics of MPI and CUDA) & MATLAB for CFD Applications
Software Experience: GAMBIT, FLUENT, CATIA, Tecplot
Research interests :
CFD, Immersed Boundary Method, Vortex induced vibration, Drag Reduction, Heat transfer Enhancement.
Areas of interest : Computational Fluid Dynamics and Heat Transfer, Automobile Aerodynamics, Renewable
Energy
Publications/Conferences :
K. Shaafi and S. Vengadesan., Vortex Suppression By The Combined Shear Effect of a Plane Wall and
Asymmetric Wake of a Rotating Cylinder.,9th European Fluid Mechanics Conference., 9-13 Sep 2012,
Rome, Italy
Y. Sudhakar, S. Vengadesan and Shaafi Mohamed., Wake characteristics of a circular cylinder attached
with an oscillating splitter plate., IUTAM Symposium on Bluff Body Flows (blubof2011)., 12-16 Dec 2011,
IIT Kanpur.
K. Shaafi and S. Vengadesan.,Wall-Proximity Effects On Heat Transfer And FlowCharacteristics Of Flow
Over A Rotating Cylinder., 14th Annual CFD Symposium., 10-11 Aug 2012, Bangalore.
About me :
Young Enthusiatic person very much eager to explore new dimension in science and research. Fascinated to
learn new things and open minded.
Education :
B.Tech Mechanical Engineering, 2006-2010, Hindustan College of Engineering, Chennai (Affiliated to Anna
Univeristy, Chennai)
E-mail id : shaafikmhd@gmail.com
Department of Biotechnology
Allu Prasanna Kumar Reddy
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Nitish R Mahapatra
Title of thesis : Identification and functional characterization of genetic variants in the dysglycemic peptide
Pancreastatin with metabolic dis-orders in an Indian population
Thesis abstract : Chromogranin A (CHGA), ubiquitously expressed in secretory cells of the neuroendocrine
system, has recently emerged as an important regulator for diverse physiological functions. Pancreastatin (PST),
a proteolytic derivative of CHGA, acts as a dysglycemic peptide by inhibiting glucose-stimulated insulin secretion.
Resequencing of pancreastatin region of CHGA in an Indian population (n=1625) revealed the occurrence of three
naturally occurring variants: C9226T causing substitution of Arg253 by Trp253, G9328A causing substitution of
Glu287 by Lys287 and G9358A causing substitution of Gly297 by Ser297. While the Glu287Lys is a novel variant
in our population, the Gly297Ser and Arg253Trp variants were reported in a European population. Interestingly,
the 297Ser variant was ~11-fold more frequent whereas the PST-253Trp variant was ~3.1-fold less frequent in our
population than the European population. The PST-287Lys and PST-297Ser peptides were more potent than the
wild-type (PST-WT) peptide in modulating pleotropic events of glucose metabolism (viz. ability to inhibit insulin
stimulated glucose uptake) and altering phosphoenol pyruvate carboxykinase-1 and glucose-6-phosphatase
promoter activities. CD spectroscopic analysis suggested that PST-287Lys and PST-297Ser peptides had
significantly higher propensities to form secondary structure (specifically, alpha helix) than the PST-WT peptide
providing a structural basis for their differential biological activities. The 297Ser allele frequency was ~1.6-fold
higher in type 2 diabetic subjects than the controls; individuals having the 297Ser allele displayed higher plasma
catecholamines and fasting blood sugar values than the carriers of 297Gly. Taken together, naturally-occurring
variations in the PST region seem to have important cardiovascular and metabolic consequences.
Skills :
Cloning of Gene
Transfection studies
Radioactive experiments
Polymerase chain reaction and purification of PCR products
Genomic DNA isolation from blood
Research interests :
Cardio vascular Genetics and Molecular biology
Areas of interest : Cardio vascular Genetics, Molecular biology of Gene
Publications/Conferences :
1. Sahu BS, Mohan J, Sahu G, Allu PK,Subtamanian L, Sonawane PJ,Singh PK, Sasi BK, Senapati S, Maji
SK, Bera AK, Gomathi BS, Mullasari AS, Mahapatra NR. Functional Genetic variants of the Catecholaminerelease-inhibitory Peptide Catestatin in an Indian Population:Allele-Specific Effects on Metabolic Traits.J Biol
Chem. 2012 Oct 26. [Epub ahead of print].
2.Sahu BS, Mohan J, Sahu G, Singh PK, Sonawane PJ, Sasi BK, Allu PK, Maji SK, Bera AK, Senapati S,
Mahapatra NR. 2012. Molecular mechanism of interactions of the physiological anti-hypertensive peptide
catestatin with the neuronal nicotinic acetylcholine receptor. J Cell Sci. 2012 May 1;125(Pt 9):2323-37.
3. . Prasanna K Reddy Allu, Bhavani S Sahu, Lakshmi Subramanian, Parshuram J Sonawane, Vinayak Gupta,
Kalyani Ananthamohan, Radha Venkatesan, V. Mohan, Nitish R Mahapatra. 2011. Identification and association
of naturally occurring polymorphisms in the exon 7 of chromogranin A gene with metabolic disorders. The 36th
Annual Conference of the Indian Society of Human Genetics (ISHG 2011). India
About me :
Highly motivated, industrious post graduate with Master of Science in Biochemistry with good analytical abilities,
pursuing PhD in the area of molecular genetics in the Department of Biotechnology, Indian Institute of Technology
Madras, Chennai.
Education :
M.Sc Bio-chemistry, 2004-2006,ANUPG centre, Nuzvid
B.Sc Chemistry, Botany, Zoology, 2001-2004, Andhra Loyola College, Vijayawada
E-mail id : malleswari.venkatreddy@gmail.com
Bhavani Shankar Sahu
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Dr. Nitish Mahapatra
Title of thesis : FUNCTIONAL CHARACTERIZATION OF HUMAN GENETIC POLYMORPHISMS IN
PHYSIOLOGICAL ANTIHYPERTENSIVE PEPTIDE CATESTATIN
Thesis abstract : Essential hypertension (EH) is the most common risk factor for cardiovascular diseases with a
prevalence of nearly 27% worldwide, and it aggregates with other cardiovascular risk factors. Even though the
exact molecular mechanism for the pathogenesis is unclear, genetic studies identified several candidate genes for
EH. Chromogranin A (CHGA), ubiquitously expressed in secretory cells of the neuroendocrine system, has
recently emerged as an important regulator in cardiovascular disease states. It acts as a prohormone giving rise
to bioactive peptides such as vasostatin [CHGA1-76] and catestatin [CHGA352-372] that exhibit several
cardiovascular regulatory functions. Catestatin is a 21 amino acid peptide that acts as a вЂ�physiological brakeвЂ™ for
catecholamine release by inhibiting the nicotinic acetylcholine receptor (nAChR) and thus important for the
regulation of catecholamine-evoked blood pressure. Two naturally occurring variants (Gly/Ser and Pro/Leu at 13th
and 19th residues) of CST display altered inhibitory potencies. However, the mechanism of differential activities of
CST variants is unclear. Here we report re-sequencing of the catestatin region of CHGA in an Indian population
(n= 1010). We detected 2 non-synonymous single nucleotide polymorphisms in this region: A9559G, causing
substitution of Gly by Ser at the 364 position of CHGA and T9570G, causing substitution of Gly by Val at the 367
position. While the Gly364Ser variant was observed in a European population (at about 2.8-fold lesser frequency),
the Gly367Val variant is a novel one in our population. Individuals having the 364Ser variant allele displayed
altered plasma levels of several metabolic traits. Electrophysiology, secretion and calcium imaging experiments
suggested that the CST variants differed in their potencies to antagonize the nAChR. Structural analyses revealed
that the catestatin variants had altered propensities to form secondary structure as compared to the wild type
peptide. Docking and molecular dynamics simulation studies also corroborated with these experimental
observations. These findings may provide mechanistic insights into understanding the genetic and molecular
causes of hypertension.
Skills :
Routine Biochemistry and molecular biology tools for pursuing state of art research.
Research interests :
Molecular Medicine.
Areas of interest : Molecular medicine
Publications/Conferences :
Publications:
1. Sahu BS, Obbineni JM, Sahu G, Singh PK, Sonawane PJ, Sasi BK, Allu PK, Maji SK, Bera AK, Senapati S,
Mahapatra NR. Molecular interactions of the physiological anti-hypertensive peptide catestatin with the neuronal
nicotinic acetylcholine receptor. J Cell Sci. 2012 May 1;125(Pt 9):2323-37.
2. Sonawane PJ, Sahu BS, Sasi BK, Geedi P, Lenka G, Mahapatra NR. 2011. Functional promoter
polymorphisms govern differential expression of HMG-CoA reductase gene in mouse models of essential
hypertension. PLoS ONE 6: e16661 (1-16). (Equal contribution).
3.Abdul Khaliq R, Sonawane PJ, Sasi BK, Sahu BS, Pradeep T, Das SK, Mahapatra NR. 2010. Enhancement in
the efficiency of polymerase chain reaction by TiO2 nanoparticles: crucial role of enhanced thermal
conductivity. Nanotechnology 21: 255704(http://www.nature.com/nindia/2010/100614/full/nindia.2010.79.html)
4. Sahu BS, Sonawane PJ, Mahapatra NR. 2010. Chromogranin A: a novel susceptibility gene for essential
hypertension. Cell Mol Life Sci 67: 861-874.
Conference Proceedings:
1. Poster presentation at the 10th world congress of human proteomic organization held from 4th to 7th
September 2011 in Geneva, Switzerland. Title: Structural and functional characterisation of polymorphisms in the
physiological anti-hypertensive peptide Catestatin Authors: Bhavani S Sahu, Jagan Mohan, Giriraj Sahu,
Parshuram J Sonawane, Binu K Sasi, Pradeep K Singh, Samir K Maji, Amal K Bera, Sanjib Senapati, Nitish R.
Mahapatra.
2.Oral presentation at the 4th World Congress of the International Academy of Cardiovascular Sciences held on
Feb. 1-3, M. S. University of Baroda, Vadodara, India.
Title of the talk - Identification and functional characterization of genetic polymorphisms in the physiological
anti-hypertensive peptide catestatin in an Indian population. Proceedings of the International Academy of
Cardiovascular Sciences
3.Poster presentation at the International Symposium on Genomics, Model organisms and disease held on
Oct. 1-2, National Centre for Biological Sciences, Bangalore, India. Title: Identification and molecular
characterization of polymorphisms in the HMG-CoA reductase gene in mouse Authors: Sahu BS, Geedi P, Lenka
G, Sonawane PJ, Mahapatra NR.
Workshops attended:
1. One day technical symposium on ion torrents sequencing organized by life science technologies in 2011.
2. One of the selected member for the two week scientific symposium on evolution and compartmentalization
of cells organized by National center for Biological sciences (February, 2012) with financial assistance.
Awards and Accomplishments:
1. N. K. Ganguly Young Investigator Award in Clinical Cardiology for research excellence by International
Academy of Cardiovascular Sciences in 2011.
2. Young scientist Travel Award by the Department of Science and Technology ,Government of India to
attend the 10th World Congress of Human Proteomics Organization .
3. Qualified Graduate Aptitude Test Exam (GATE 2007).
4. Awarded the Best Student for academic excellence during Bachelor of Science degree by the Vice
Chancellor of Andhra University in the year 2005.
5. Awarded merit scholarship from the police academy of Andhra Pradesh from year 2000 вЂ“ 2005.
About me :
Honest, Sincere and Hardworking
Education :
Degree
Major
Duration
University
Percentage / Grade Point Average
Doctor of Philosophy
Junior Research fellow
Biotechnology
Cardiovascular genetics
Pursuing
(18th Dec 2008-2012)
(4thAug 2007вЂ“ 18th Dec 2008)
Indian Institute of Technology - Madras
8.0
Master of Science
Biochemistry and Molecular Biology
(2005 August -2007 May )
Pondicherry University
7.7
Bachelor of Science
Botany, Biotechnology and Chemistry
3 years (2002June-2005 June )
Andhra University
8.0
E-mail id : bhavanisahubioips@gmail.com
Dillip Kumar Bishi
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Prof. Rama Shanker Verma
Title of thesis : Hepatic tissue engineering using human mesenchymal stem cells and nanoscaffold
Thesis abstract : Human bone marrow derived mesenchymal stem cells (MSCs), due to its unique property of
plasticity, can be differentiated and trans-differentiated into cell types of all three germinal layers. Hepatic transdifferentiation of human MSCs has been achieved successfully with various cytokines and chemicals and also by
using serum components (platelet lysate, cholestatic serum and serum from liver injury patients). In this study, we
have evaluated the hepatogenic potential of human MSCs using a novel inducer (i.e. sera obtained cardiac failure
patients, who has developed secondary jaundice). Due to high level of hepatocyte growth factor and allied
hepatogenic factors present in such sera, the process of hepatic trans-differentiation of MSCs can be more
effective. The usage of a three dimensional scaffold enhances the process of cellular proliferation and
differentiation for functional tissue regeneration strategy. Therefore, in this study, we have evaluated the hepatic
differentiation of MSCs on a PLACL-collagen nanofibrous scaffold, as a supportive hepatomimetic scaffold for
liver tissue engineering.
Skills :
adult and embryonic stem cells-isolation, maintenance, differentiation
in vitro tissue regeneration
in vitro drug toxicity testing
generation of human and mouse cell lines
proteomics analysis of tissue and sera samples by 1D and 2D proteomics
RNA, DNA, Protein isolation, real time PCR assay
microscopy-bright field, immunofluorescence, confocal imaging
basic handling of muman, mouse and chicken cells
fabrication of nanofibers, design of scaffolds for tissue engineering
basic molecular biology tools
Research interests :
Stem cell Biology
Tissue engineering
Biomaterials
Bionanotechnology
Proteomics
Molecular Biology
Areas of interest : Stem cell biology, Tissue engineering, Biomaterials, Proteomics, Molecular Biology,
bionanotechnology
Publications/Conferences :
Publications
1.
D. K. Bishi, S. Verghese, R.S.Verma, Molecular typing of colonizing Streptococcus agalactiae strains by
enterobacterial repetitive intergenic consensus PCR (ERIC-PCR) in a Chennai based hospital , Indian Journal of
Microbiology (2008) 48; 291-296.
2.
M. Himabindu, D. Sugapriya Muthamilselvan, Dillip Kumar Bishi and Rama S. Verma , Molecular Analysis
of Coagulase Gene Polymorphism in Clinical Isolates of Methicilin Resistant Staphylococcus aureus by
Restriction Fragment Length Polymorphism Based Genotyping , American Journal of Infectious Diseases (2009),
5 (2): 170-176.
3.
Suneel R,* Dillip Kumar Bishi*, Rama S. Verma, K.M.Cherian, Soma Guhahakurtha, вЂњA Multiplex PCR
Technique for Characterization of human mesenchymal stem cellsвЂќ, Biotechnology Letters (2009) 31:1843вЂ“1850.
(* Both as First Coauthor)
4.
Ramesh B, Bishi DK, Rallapalli S, Arumugam S, Cherian KM, Guhathakurta S. Ischemic cardiac tissue
conditioned media induced differentiation of human mesenchymal stem cells into early stage cardiomyocytes.
Cytotechnology. (2012) Mar 7 (In Press).
5.
Sreejit P, Dillip K.Bishi, Rama S. Verma, Generation of mesenchymal stem cell line from mouse bone
marrow, cell and tissue research (2012) (In Press)
6.
Dillip Kumar Bishi, Santosh Mathapati, Jayarama Reddy Venugopal, Soma Guhathakurta, Kotturathu
Mammen Cherian, Seeram Ramakrishna, Rama Shankar Verma. Trans-differentiation of human mesenchymal
stem cells towards functional hepatospheres with poly (L-lactic acid)-co-poly (?-caprolactone)/collagen nanofibres.
Biomaterials, (Under peer review).
7.
Dillip Kumar Bishi, S. Guhathakurta, K.M. Cherian, Rama S. Verma. Hepatic transdifferentiation of human
bone marrow mesenchymal stem cells by induction with sera from cardiac failure associated liver failure patients.
(Manuscript under preparation).
Conference Proceedings:
1. Dillip Kumar Bishi, S. Guhathakurta, R. S. Verma, K.M.Cherian, вЂњ A novel electrospun nanoscaffold with
biomagnetic property augments hepatic differentiation of human MSCsвЂќ, 6th annual congress of German
Society for Stem cells Research, Dusseldorf, Germany, November 2011. (Oral Presentation)
2. Dillip Kumar Bishi, вЂњSpontaneous differentiation of chicken embryonic stem cells towards beating
cardiomyocytesвЂќ, 20th World congress of the world society of cardiothoracic surgeonsвЂќ, Chennai, October
2010. (Oral Presentation)
3. Dillip Kumar Bishi, R. Balasundari, Soma Guhathakurta, K.M.Cherian, вЂњ Comparative 2DE proteomic
profiling of ischemic and non-ischemic cardiac tissuesвЂќ, 5TH AOHUPO, 1st PSI and 17th ADNAT
CONFERENCE, Center for Cellular and Molecular Biology, Hyderabad, Feb 2010
4. Dillip Kumar Bishi, Suneel R., Balasundari R., Soma Guhathakurtha, K.M. Cherian, Rama S. Verma,вЂњ
Dexamethasone alone can induce adipocytic differentiation of human bone marrow derived mesenchymal
stem cellsвЂќ , 77th annual meeting, Society of Biological Chemists, organized at IIT Madras, Dec 18-20,
2008
5. Dillip Kumar Bishi, Naveen Babu, Suneel. R., Soma Guhathakurtha, K.M.Cherian, Rama Shanker
Verma, вЂњ Transdifferentiation of human mesenchymal stem cells towards hepatic lineage using cholestatic
serumвЂќ, 1st International Stem cell Summit, Organized at IIT Madras, Nov 14-17, 2008. (Best poster
award)
6. Suneel R., Dillip Kumar Bishi, , K.M.Cherian, Soma Guhathakurtha, вЂњ Stem cells specific marker
expression profiling during different lineages by RT-PCRвЂќ ADNAT Symposium, Center for Cell and
Molecular Biology, Hyderabad, February 2008
7. Dillip Kumar Bishi, Suneel R., Sudha warrier, K.M. Cherian, Soma Guhathakurta, вЂњDifferential protein
and mRNA expression profiling of bone marrow derived mesenchymal stem cell markers during
expansion вЂќ FRONTIER CONCLAVE-2007, Chennai
8. Dillip Kumar Bishi, Susan Verghese, Rama Shanker Verma, вЂњMolecular typing of Group B Streptococcus
using ERIC-PCR based methodвЂќ presented at national conference organized by Hospital Infection
Society of India (IX HISICON 2007) at Chandigarh, Feb 2007
Patents
1. Suneel R., Dillip Kumar Bishi, Soma Guhathakurtha, K.M. Cherian, Patent application for вЂњA
MULTIPLEX PCR TECHNIQUE FOR DETECTING human Mesenchymal Stem CellsвЂќ under application
no.2642/CHE/2008 in the name of International Centre For Cardio Thoracic And Vascular Diseases,
Chennai, India
SYMPOSIUMS/WORKSHOPS ATTENDED
1. National Workshop on Industrial biotechnology from laboratory to market place held at IIT Madras in 24th
-27th Dec 2006-6th Jan 2007
2. ICMRвЂ™s 4th Medical Development Congress on Stem cell Research and Therapy, вЂњAdvances in Clinical
Research and TherapyвЂќ, 13-14 April, 2009
3. DBT sponsored workshop on вЂњ Human Embryonic Stem cell- differentiation and Genetic ManipulationвЂќ
held at NIRRH, ICMR, Mumbai in 18th -23rd Jan, 2010
4. Training on вЂњFabrication of electrospun nanofibers, in vitro cell culture and hepatic differentiationвЂќ at
Nanoscience and Nanotechnology Initiatives, National University of Singapore, Feb-Apr 2011
About me :
self motivated, ready to work in a group, well trained in standard cell biological assays for characterization,
stemness, pluripotency, differentiation and proof of regeneration.A committed person with good interpersonal
skills, work ethics, record keeping and flexibility. self starter and willing to learn new things.
Education :
Sl. no.
Examination
Institution
Year of completion
Major Subjects
% of marks/div/Rank
1
B.Sc.
Sambalpur University, Orissa
2001
Zoology
(Honours),
Chemistry, Botany
75%/First/1st Rank in University
2
M.Sc.
Sambalpur University, Orissa
2003
Life Sciences
(Biochemistry Specialization)
70%/First/3rd Rank in university
3
M.Tech (Medical Biotechnology)
IIT Madras, Chennai
2007
Regenerative medicine, biomaterials clinical physiology and biochemistry, etc.
CGPA 8.65 out of 10
4
Ph.D
IIT Madras, Chennai
2012 (Thesis submitted)
Stem cell and Nanotech based tissue engineering
Topic: Hepatic transdifferentiation of human mesenchymal stem cells: role of liver failure sera and impact of
nanoscaffold
E-mail id : dillipkumar.bishi@gmail.com
Kalaiyezhini D
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Ramachandran K B
Title of thesis : Optimization of production of Poly (3 - hydroxybutyrate) from glycerol by Paracoccus denitrificans
Thesis abstract : Polyhydroxybutyrates (PHBs) are polyester that is synthesized by microorganism intracellularly
as carbon and as energy reservoir. They are biodegradable. They find applications in medical, agricultural and
packaging industries. Currently, the cost of production of this polymer is high and it could be reduced by using a
cheap carbon source. Glycerol is being let out as waste in biodiesel industry. Using this glycerol as a cost
effective substrate our work aims to optimize the medium components and the process parameters for increased
productivity and reduced cost of the polymer. Several mathematical and statistical techniques are available for
Medium design and optimization. In our study Plackett Burman Design (PBD) and Response Surface
Methodology (RSM) were adopted. Using the optimized medium the effect of the process variables (pH, agitation,
substrate concentration..,) for the production of PHB are studied in the 2l batch bioreactor. Using these data a
structured kinetic model is developed. This kinetic model will be used to achieve high yield and productivity
through fed batch fermentation. Maximum polymer concentration of 13.5 g/l with 73 % PHB accumulation was
obtained in batch fermentation. Maximum yield and productivity were found to be 0.546 g/g and 0.3 g/l.h
respectively. This study would pave way for advanced studies like fed batch fermentation in near future.
Skills :
Bioreactor operation
Microbiology work
Matlab
Media formulation
Bioassays
HPLC
Thin Layer Chromatography
Column chromatography
RT - PCR
Western blot
Research interests :
Media formulation
Bioprocess optimization
Modeling and simulation
Areas of interest : Bioprocess optimization, Process development, Modeling and Simulation
Publications/Conferences :
Kalaiyezhini D, Ramachandran K B, " Optimization of production of polyhydroxybutyrate from glycerol by
Paracoccus denitrificans ". Oral presentation at third international congress on Green Process Engg, Dec 6 - 8,
2011, Kuala Lumpur, Malaysia.
About me :
I am Kalaiyezhini D from Puducherry, doing my Ph.D at IIT Madras. I did my schooling at Immaculate Girls Hr.
Sec.Sc, Puducherry. I secured 100 % in science in class 10 th Std and came school fourth in Std 12 th with 99.5
% in chemistry. I pursued my Engg Course at prestigious institute at Puducherry. I am a Chemical Engg Gold
medalist. Then I took my Master in Biotechnology sponsored by Department of Biotechnology. Currently doing my
Ph.D in the area of Bioprocess engineering. I engaged in Co and Extra curricular activities right from schooling. I
have won prizes in handwriting, Quiz, music, Elocution, Technical paper presentation competition. I was honoured
with Tamil poet certificate and I enjoy listening music.
Education :
B.Tech Chemical Engineering, 2000 - 2004, IIT Madras
M.Tech Biotechnology, 2004 - 2006, A.C.Tech, Anna University, Chennai.
Ph.D Bioprocess Engineering, 2007 - till now, IIT Madras.
E-mail id : kalaiyezhini@yahoo.co.in
Nidhi Aggarwal
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Prof. Anju Chadha
Title of thesis : Studies on novel alcohol dehydrogenase from Candida parapsilosis ATCC 7330
Thesis abstract : Isolation of alcohol dehydrogenase (cloning , overexpression and purification) Biochemical
characterisation Biophysical characterisation Crystallisation
Skills :
-protein purification
Research interests :
enzymology
protein engineering
biocatalysis
crystallisation
green chemistry
Areas of interest : green chemistry, isolated enzymes, protein engineering
Publications/Conferences :
a)Nidhi Aggarwal, Anju Chadha.
Enzymes in organic synthesis :Partial Purification and Biochemical
Characterisation of a Carbonyl Reductase from Candida parapsilosis ATCC 7330 presented at Society of
biological Chemists (India), IIT Madras, Chennai , December 2008.
b)Nidhi Aggarwal, Anju Chadha. Cloning, Overexpression, purification and biochemical characterization of novel
alcohol dehydrogenase from Candida parapsilosis ATCC 7330. Abstract accepted for oral presentation at ICEST
2011, Turkey, October 2011.
c)Nidhi Aggarwal, Anju Chadha. Studies on novel alcohol dehydrogenase from Candida parapsilosis ATCC7330.
Oral Presentation at in house symposium"Biomers-2012" on 21 st September'2012.
d)Nidhi Aggarwal, Anju Chadha. Purification and biochemical characterization of a novel alcohol dehydrogenase
from Candida parapsilosis ATCC 7330.13th Tetrahedron Symposium---Asia Edition' Nov'2012.
e) Nidhi Aggarwal, Anju Chadha. Understanding the substrate specificity and enantioselectivity of carbonyl
reductases isolated from Candida parapsilosis ATCC 7330. International Conference on Biomolecular Forms and
Functions- Jan2013.
About me :
keen to learn new things
Education :
PhD вЂ“ Biotechnology- Department of Biotechnology ,IIT Madras -Jan 2007 вЂ“ present
M Sc - Medical Biotechnology- PGIMER, -2003- 2005
B Sc- Biomedical Sciences- University of Delhi-1999-2002
E-mail id : indianidhi1@gmail.com
Vincent Gerard Francis
Doctor of Philosophy (PhD)
Department of Biotechnology
Guide : Dr. Sathyanarayana N Gummadi
Title of thesis : Biochemical and Biophysical Characterization of Human Phospholipid Scramblases
Thesis abstract : Currently working towards understanding the mechanism of phospholipid translocation (PL) by
ATP independant class of PL transporters called " Scramblase". These class of proteins are known to mediate
bidirectional scrambling of PL notably phosphatidylserine (PS) across the lipid bilayer during cellular processes
such as blood coagulation, apoptosis and cell activation in reponse to elevated intracellular calcium concentration.
Since it is a calcium binding protein, understanding the calcium induced conformation changes will help in
understanding the mechanism of PL translocation. However till date there exists no molecular structure and
mechanism of PL translocation still remains elusive. Hence using various biophysical, bichemical and moelcular
biology strategies we are working towards solving the above mentioned problem.
Skills :
Protein purification
Molecular Cloning
Cell culture
Biophysical techniques
Research interests :
Cancer Biology
Protein Biochemistry
Areas of interest : Molecular Biology, Cancer biology, Protein biochemistry
Publications/Conferences :
Publications
V.G. Francis, A. Majeed, S.N. Gummadi (2012) Recovery of functionally active recombinant human
phospholipid scramblase 1 from inclusion bodies using N-Lauroyl Sarcosine, Journal of Industrial
Microbiology and Biotechnology, 39: 1041-1048
V. G. Francis, S.N. Gummadi (2012) Biochemical and functional characterization of human phospholipid
scramblase 4 (hPLSCR4), Biological Chemistry 393: 1431-6730.
Conferences
Vincent Gerard Francis, Abdul Majeed, Gopala Krishna Aradhyam and Sathyanarayana N Gummadi,
Overexpression, purification and biochemical characterization of Ca2+ binding properties of ?TMhPLSCR1, Asian Biophysics and Indian Biophysical Society (Jan 2011), New Delhi.
Biochemical characterization of hPLSCR4 вЂ“ Indian Biophysical Society (Jan 2012), Chennai.
About me :
I decided to take up a biotechnology as my career option while pursuing my BSc programme. I qualified the AllIndia entrance examination with 2nd rank conducted by University of Hyderabad for MSc. The course work and
research atmosphere there inspired me to pursue research. I have taken up a career in research so as to
contribute my part towards the existing scientific knowledge. My ability to design and troubleshoot the projects I
am working with have helped immensely to progress in my graduate programme here without any major
constraints. I have also guided many other students (MSc and MTech) with their projects, which helped me to
become independant and self reliable.
Education :
B.Sc Biotechnology (2002-2005) at Loyola Academy, Hyderabad
M.Sc Animal Bioetchnology (2006-2008) at University of Hyderabad, Hyderabad
E-mail id : vinci2003@gmail.com
Ryan Thomas Philips
Master of Science by Research (MS)
Department of Biotechnology
Guide : V. Srinivas Chakravarthy
Title of thesis : To investigate, both experimentally and computationally, the role of phase information in a visiomotor task like copying simple line diagrams.
Thesis abstract : The task of copying a line is one in which there is an inherent ambiguity. The possible input
orientations can range only from 0 to 180 degrees; whereas the same line can be copied from 0 to 360 degrees.
Thus there is a one to many mapping involved, such that each orientation given as the input can be replicated in 2
possible ways which are in opposite directions. The aim of this work is to model human experimental copying data
using a dynamic neural network. In this model the phase information from an oscillatory layer is used in order that
the network learns to copy the given line. The model can simulate both the flip behavior as well as the error plots
similar to those seen in the data from human subjects. This model can be extened to the copying of arcs and
ellipses also. To investigate the role of phase information further, a relationship between the phase information of
electroencephalograph from human subjects on being shown different orientation gratings is also studied.
Skills :
Programming Tools: Matlab
Programming Languages : C/C++
Design Skills : Working Knowledge of Photoshop, Gimp, CorelDraw
Circuit Design Skills : Working Knowledge of Multisim, Eagle Software.
Communication Skills : Excellent written & verbal English. Fair typing speed.
Research interests :
Computational Neuroscience
Human Vision
Computer Vision
Neural Networks
Areas of interest : reading fiction, playing the keyboard
Publications/Conferences :
NA
About me :
I like to work on challenging problems. If a problem seems interesting I try to pursue it, even if I do not have the
necessary skill sets. For example, I worked on a global gesture recognition challenge along with a colleague.
During the 2 years of my masters I have learnt to work consistently to fulfil a goal.
Education :
B.E. Biomedical Engineering, 2006-2010, Vidyalankar Institute of Technology (Mumbai University)
E-mail id : ryanzhere@gmail.com
Department of Chemical Engineering
A. Seenivasan
Doctor of Philosophy (PhD)
Department of Chemical Engineering
Guide : Pro. T. Panda
Title of thesis : Biosynthesis studies on statin by fungi (Tentative)
Thesis abstract : I started with quantification techniques for statin and it comprises the investigation on analytical
suitability of both HPLC and UV-Vis spectrophotometer. The optimum extraction conditions for statin and
suggested suitable chromatographic conditions Localization of lovastatin and simvastatin in Monascus purpureus,
Monascus ruber, and Pleurotus ostreatus have been summarized. Identification of important metabolites during
statin biosynthesis in these organisms and concepts of metabolic footprinting to understant how the cell behaved
with respect to culture conditions. Influence of both physico-chemical (pH, temperature, and agitation speed) and
medium constituents on statin biosynthesis were studied together using TaguchiвЂ™s design of experiment to find
out their relative influence on statin biosynthesis. Finally, the stability of lovastatin synthesized in fermentation
broth has also been discussed.
Skills :
Technically: 6 years of research experience in the field of biological reaction engineering, biopharmaceutical
technology and metabolic engineering
Optimization biological reaction Engineering
Statistical optimization of biological parameters, physico-chemical parameters and process
parameters using different optimization techniques viz., Taguchi, RSM, CCD, and genetic
algorithms.
Effective screening experiments like placket-Burman design of experiments, Generalized distance
based approach and One parameter at time
Design, execution and evaluation of experiments using design of experiments (DOE)
Sound knowledge in microbiological techniques:
Isolation, preservation and characterization of microbes - bacteria, fungi and actinomycetes
Rapid screening of microbes for biomolecules - bioactive compounds, enzymes etc.
Applied mycology such as synthesis of primary and secondary metabolites.
Characterization of microbial products: purification (gel and ultra filtration, ion exchange chromatography)
and characterization (gel electrophoresis, chemical analysis etc)
Screening and evaluation of enzymatic reaction and enhancement of enzyme activity using DOE
Molecular biological techniques (PCR, Gel electrophoresis, Competent cell preparation and
recombination, and Blotting techniques), and Immunological techniques (ELISA, Rocket gel
electrophoresis, Antigen-antibody precipitation).
Chromatography Techniques (GC, HPLC-PDA/RID, Column chromatography, and Gel filtration) and
Spectrophotoscopy.
Method development for analysis of biomolecules derived from fermentation such as, drugs, vitamins,
sugars (clinically significant), organic acids, and most of primary and secondary metabolites.
Functional genomics studies of organisms by studying extracellular metabolites accumulation in broth.
Fermentation technology: Shake flask and fermentor production of microbial products - upstream
processing: Shake flask (50 вЂ“ 500mL scale) and fermentor (3L scale).
Downstream processing of Biological products using ultrasound techniques and ultrasound assisted
enhancement of products from mycelia.
Operation of modern laboratory instruments: Fermentor, HPLC-PDA/RID, GC, Spectrophotometer,
Electrophoresis units (PAGE and Agarose), and Microscopic instruments (light, phase contrast, and
fluorescence).
Preparation of Standard Operation Procedures (SOP) for Biochemical lab.
Writing scientific manuscripts, project proposals, reports, development of standard protocols and record
keeping.
Laboratory Team Leader during Ph.D and M. Tech for maintenance of laboratory, planning of projects,
preparation of project reports, and guidance of junior students for their B. Tech and M.Tech thesis and
training in microbial techniques.
Research interests :
BIOCHEMICAL ENGINEERING AND BIO-PHARMACEUTICAL TECHNOLOGY
Screening, biosynthesis, isolation, extraction and purification of microbial products (Fermentation
Technology)
Optimization of physico-chemical and biological conditions of biological reactions and process parametersStatistical optimization and Process intensification
Method development for biologically derived compounds, like HPLC (Gradient and Isocratic modes), GC,
and derivative spectroscopy etc.
Novel biopharmaceutical-products from naturally existing compounds to increase the physical properties
like dissolution, bio-availability, and transportation characteristics and etc.
Microbial bioconversion of agricultural waste/by-products into valuable green chemicals via enzymatic
reaction
Chemical and enzymatic modification of microbial bioactive compounds to enhance their biological
properties
Upstream and downstream processing of microbial products and enzymes
METABOLIC ENGINEERING
Effects of various physico-chemical parameters on metabolic network especially, metabolic pathway
shifting and production of desired products
Metabolic footprinting of microbial metabolism-an in situ into functional genomics of complex metabolic
network
Development of the concepts of metabolic engineering to identify metabolic network of microbial reactions
NANO BIOTECHNOLOGY AND MINIATURIZATION
Design and development of nano-drugs for the enhancement of biological activities and reduce the
cytotoxicity
Design and development of drug carriers such lipidic materials (SLNs, NLC, and LCs) to enhance the bioavailability of orally administrated drugs
Barriers in the drug targeting and development of carriers to overcome the difficulties in drug delivery
Miniaturization of biological reactions (immunological reactions) into chips and creating a Physiological
environment in Bio-chips
Investigation of microbial interaction with plants and animal
Areas of interest : Bichemical Engineering, Biopharmaceutcal nanobiotechnology, Soild-state Bioprocessing,
Optimization, Enzyme Engineering, and Industrial Safety Engineering
Publications/Conferences :
Seenivasan A, Panda T, Thomas ThГ©odore, вЂњLovastatin nanoparticle synthesis and characterization for
better drug deliveryвЂќ, Open Biotechnol. J, 5, 2011, 28-32.
Seenivasan A, Panda T, Thomas ThГ©odore, вЂњCharacterization, Modes of Synthesis, and Pleiotropic
Effects of Hypocholesterolemic Compounds вЂ“ A ReviewвЂќ, Open Enzym. Inhib. J, 4, 2011, 23-32.
Seenivasan A, Subhagar S, Aravindan R, Viruthagiri T. Microbial production and biomedical applications
of lovastatin. Indian J Pharm Sci., 70, 2008, 701-9.
Ayothiraman, S. Seraman, S. Rajendran, A. Thangavelu, V. Lovastatin - A Potent Hypercholesterol Drug.
Chem. Weekly, 53, 2008, 193-6.
Seenivasan A, Sathyanarayana N. Gummadi,, Panda T. Quantification of Lovastatin produced by
Monascus purpureus by UV-visible spectrophotometry and HPLC. J. Anal. Chem. (Communicated).
Seenivasan, A., T. Panda. Biochemical Studies on Lovastatin and Simvastatin: Biosynthesis and
Localization. Asian congress on biotechnology Proceedings, Shanghai, China on 11th to 15th May 2011,
page no. 138 (Abstract ID. A1274).
Seenivasan, A., T. Panda. Nano-Assisted Carriers for Lovastatin Oral Delivery System. 2nd international
conference on materials for future (ICMF) Proceedings, 2011, Kerala on 23rd to 25th Feb, 2011, page no
79.
S. Seraman, S. Ayothiraman, A. Rajendran, and V. Thangavelu. Optimization of Lovastatin production by
Monascus purpureus MTCC 369 Using Plackett-Burman and central composite statistical experimental
design, 12th International symposium on preparative and Industrial Chromatography and Allied techniques
(SPICA 2008), Switzerland, Page no. 179 (Abstract ID. 2136).
Seenivasan, A., T. Panda. Nano-assisted drug delivery system. Recent and Emerging Advances in
Chemical Engineering (REACH-2010) Proceedings, International conference held at IIT Madras, Chennai.
Seenivasan, A and Selvaraju, N. Biohydrogen: an effective alternate to fossil fuel in national conference
on recent trends in alternative energy 2011 at NIT, Calicut, Kerala, page no. 36.
About me :
Seenivasan:- Typical Research scholar looking for challenging tasks to research and highly motivated personality.
Perfect planning and execution is my style. Effective communication and Team work are my strength. Strong
knowledge in basics of different areas is my positive. Only negative with me is not getting my best chance to show
me who I am.
Education :
B. Tech Industrial Biotechnology, 2002-2006, Anna University affl. college
Diploma Industrial Safety Engineering, 2008, Annamalai University
M. Tech Industrial Biotechnology, 2006-2008, Annamalai University
Ph.D Chemical Engineering Indian Institute of Technology Madras (IITM)
E-mail id : seethaseeni@gmail.com
G.keerthiga
Doctor of Philosophy (PhD)
Department of Chemical Engineering
Guide : Dr.Raghuram Chetty
Title of thesis : Electrochemical Reduction of Carbon dioxide to Useful Chemicals
Thesis abstract : The conversion of carbon dioxide to useful chemicals has been a subject of numerous
investigations, as turning CO2 into useful chemical could help reduce the level of greenhouse gas in the
atmosphere. Though a variety of methods exist for carbon dioxide conversion, electro chemical and photoelectrochemical reduction have shown to be promising venture. The product selectivity in these methods for CO2
reduction can be tuned by many variables, such as concentration of the reactants, electrode potential,
temperature, electro catalyst, and nature of the electrolyte in which the stable CO2 molecule is activated and
reduced. As far as aqueous electrolyte is concerned, KHCO3 and KCl has been preferred for reducing CO2 due
its solubility; among which the adsorption of chloride ions on the electrode surface and electron-transfer to CO2
via the Xad ? (Cl)вЂ“C bond is facilitated, in the case of KCl solution. Among the metals investigated Cu and Zn with
medium hydrogen overvoltage, offer scope for higher hydrocarbon products as it can catalyze the breaking of
carbonвЂ“oxygen bond in CO2, and also allow CO to desorb. In this work, the Cu and Zn electrodes were
investigated for CO2 reduction in two different electrolytes and the effect of electrode potential, electrolyte
concentration and selectivity of the products formed are studied.
Skills :
ASPEN
Basics of Mat lab, Ms Office.
Research interests :
Electrochemical reduction
Chemical Reaction Engineering
Areas of interest : Chemical Reaction Engineering
Publications/Conferences :
Keerthiga.G, Viswanathan. B , Alex Pulikottil . C and Raghuram Chetty, "Electrochemical Reduction of Carbon
Dioxide at Surface Oxidized Copper Electrodes ", Bonfring International Journal of Industrial Engineering and
Management Science, Vol. 2, March 2012. pp.
About me :
Sincere where i dont want to cut class and labs.Used to enjoy my reserach
Hard worker, Pessimist.
Enjoys campus
Education :
SSLC TN, I.H.M Girls High School, Chennai, 94% ,March 2001
Higher secondary, TN (HSLC) I.H.M Girls High School, Chennai, 93% ,March 2003
B.Tech, Chemical Engineering School of Engineering and Technology Trichy, 85.84% ,2003-2007
M.Tech Chemical Engineering A.C.Tech college of technology, Anna University - Chennai, 9.5 (CGPA),
2007-2009
E-mail id : keerthigagopal@gmail.com
M Kranthi Kumar
Doctor of Philosophy (PhD)
Department of Chemical Engineering
Guide : Raghuram Chetty
Title of thesis : Development of Palladium Structures for Fuel Cells
Thesis abstract : Fuel cells are one of the key enabling technologies for future economy thereby providing
power in stationary and portable power applications. Reduction of oxygen (ORR) is a key electrochemical
reaction, and an improved understanding of its mechanism and the development of more efficient electro catalysts
underlie much of fuel cell research. An ambitious approach towards improving cathode electro catalysts is to
completely remove Pt and replace it with less expensive materials while maintaining the catalytic activity. As an
alternative to platinum, palladium has been the focus of considerable attention in fuel cell research due to the
relatively abundant and less expensive resource. Palladium-based catalysts in nanoparticle form are seen as
ideal electro catalysts for oxygen reduction reaction due to their increased activity, surface area and improved
methanol tolerance in the case of direct methanol fuel cells. The size and structural morphology of Pd nano
particles are known to have significant effect on promoting the ORR and well controlled nano structures are
therefore essential for achieving efficient catalysts for fuel cells. Pd catalysts were prepared from chloride
precursors in acid solutions by cyclic and constant voltage deposition techniques directly on electrochemically
treated carbon-based substrates (like Vulcan XC-72R, Carbon nanotubes, Graphene etc.), which are widely used
as support material in fuel cells. The effects of electrochemical treatment and carbon loading were studied in
relation to the catalytic activity for oxygen reduction reaction in an acidic electrolyte. The catalysts were
characterized by scanning electron microscopy to study the morphology and structure of the nanoparticles.
Deposition by cyclic voltammetry and constant voltage techniques displayed a dendritic and flower like
morphology of Pd. The results indicated that controlled insertion of defects on the carbon during electrochemical
treatment favored a good Pd deposition, metal-support interaction and improved the hydrophilicity of the surface
with enhanced catalytic activity towards oxygen reduction.
Skills :
В·
В·
В·
В·
Expertise in experimental methods relevant to fuel cell technology.
Knowledge of mathematical modelling and numerical simulation of physical systems.
Expertise in handling analytical instruments like Scanning Electron Microscope.
Demonstrated leadership and team playing capabilities.
Research interests :
В·
В·
В·
В·
Fuel Cell Technology
Electrochemistry for advanced electrodes
Modeling and Simulation of Fuel Cells
Chemical Reactor Theory
Areas of interest : Fuel Cell Technology, Electrochemistry for advanced electrodes, Modeling and Simulation of
Fuel Cells, Chemical Reactor Theory, Utilities & Piping
Publications/Conferences :
1.
Kranthi Kumar Maniam and Raghuram Chetty вЂњDevelopment of Pd nanostructures as Cathode Catalysts for
Fuel CellsвЂќ, National Seminar on Advanced Processing and Applications вЂњ NSAMPA-2012вЂќ Coimbatore, Mar
29-30, 2012.
2.
Kranthi Kumar Maniam and Raghuram Chetty вЂњElectrochemical Deposition of Palladium Nanostructures on
Carbon Coated Substrates for Oxygen Reduction Reaction вЂќ, Sixth Asian conference on Electrochemical Power
Sources вЂњ ACEPS-6вЂќ Chennai, Jan 6-8, 2012.
3.
Kranthi Kumar Maniam and Raghuram Chetty вЂњ Palladium Nanostructures with Dendritic Morphology for
OxygenReduction Reaction вЂќ, an international conference on Fuel Cell
Technology & Applications- вЂњ Piero
Lunghi Conference & ExhibitionвЂќ Rome, ITALY, Dec14-16, 2011.
4.
Raghuram Chetty and Kranthi Kumar Maniam вЂњ Electrodeposited Palladium
Nanoflowers for Oxygen
Reduction Reaction вЂќ, accepted for presentation at the 220th ECS Meeting & Electrochemical Energy Summit in
Boston, Massachusetts, USA, Oct 9-14, 2011.
5.
Kranthi Kumar Maniam and Raghuram Chetty вЂњSynthesis of Pd Nanostructures by Potentiostatic Deposition
for Oxygen Reduction ReactionвЂќ inвЂ�ChEmferenceвЂ™11- Annual Research SymposiumвЂ™ organized by Dept. of
Chemical Engineering, IISc Bangalore, India, Sep 22-23, 2011.
6.
Kranthi Kumar Maniam and Raghuram Chetty вЂњElectrodeposition of Palladium on an Electrochemically
Activated carbon Support For Oxygen Reduction Reaction вЂќ delivered an oral presentation in вЂ�NSESTвЂ™11Annual Research SymposiumвЂ™ organized by the Electrochemical Society of India (ECSI), IISc Bangalore, Aug
19-20, 2011
7.
Kranthi Kumar Maniam and Raghuram Chetty вЂњElectrodeposited Palladium Nanoparticles on Modified
Graphite Electrodes for Oxygen Reduction Reaction in Direct Methanol Fuel CellsвЂќ, an international symposium
on Recent and Emerging Advances in Chemical Engineering, IIT Madras, Chennai, India. Dec 2-4, 2010.
8.
Kranthi Kumar Maniam and Raghuram Chetty ,вЂњElectrodeposited Palladium For Oxygen Reduction
Reaction in Direct Methanol Fuel CellsвЂќ inвЂ�ChEmferenceвЂ™10- Annual Research SymposiumвЂ™ organized by Dept.
of Chemical Engineering, IIT Kanpur, Kanpur, India, Jul 12-13, 2010.
9.
Kranthi Kumar Maniam and Raghuram Chetty вЂњElectrodeposition of Palladium on an Electrochemically
Activated carbon Support For Oxygen Reduction Reaction вЂќ delivered an oral presentation in вЂ�NSESTвЂ™11Annual Research SymposiumвЂ™ organized by the Electrochemical Society of
India (ECSI), IISc
Bangalore.(Second best paper presentation award).
Patents filed
A Patent on
вЂњA METHOD OF PREPARING PALLADIUM DENDRITESвЂќ has been filed
(Ref No.: 3632/CHE/2012).
About me :
Hi... i am Kranthi Kumar basically from Andhra Pradesh now settled in Tamil Nadu,obtained Bachelors degree in
Chemical Engineering from Satyabama University. I finished my masters in chemical engineering from AC
College of Technolgy ,Anna university(University which has a great history).Later i joined a Asst. Engineer in
M.N.Dastur and co, Chennai under utilities and piping division for 1 and 1/4 years. I was the dealing Piping
engineer for power projects such as Vizag steel plant (VSP), Sambhav Energy Ltd (SEL),Sutlej Textiles,Astro Bio
Energy. Later, i joined P.hd in the department of Chemical Engineering at IIT Madras under the guidance
of Dr.Raghuram Chetty in early 2009. In fact, i am his first Ph.D student. So, I had to set up the lab before i started
my research.My research is in the area of Fuel cell catalysis . The main objective of my Ph.D is to develop nonplatinum based catalysts for fuel cell applications. We have successfully filed three patents.In addition, I have
experience in handling analytical instruments like Scanning Electron Microscope adn other electrochemical
instruments such as rotating disc electrode (RDE),potentiostats. Besides academics, I also served as the general
secretary. Krishna Hostel, IIT Madras for the year 2010-2011, was responsible for successful planning and
implementation of the hostel budget of Rs 5 lakhs, organizing `Krishna Hostel Day '11' (hostel day festival). I also
served as Research ScholarsвЂ™ Association coordinator, Chemical Engineering Department, organized TALENT
MEET (A technical getogether). The joy of learning and the passion towards my mother country has motivated me
to do Ph.Din INDIA
Education :
B.Tech (Bachelor of Technology) in Chemical Engineering
2001-05
Sathyabama Institute of Science & Technology(Deemed University),Chennai, India with 82.2%
M.Tech (Master of Technology) in Chemical Engineering
2005 вЂ“ 07
A.C. College of Technology, Anna University, Chennai, India with 7.80 CGPA on a 10 point scale
E-mail id : m.kraanthi@gmail.com
M. Sudhakar
Doctor of Philosophy (PhD)
Department of Chemical Engineering
Guide : Dr. Sridharakumar Narasimhan
Title of thesis : Approximate dynamic programming based control of distributed parameter system involving
hyperbolic PDE
Thesis abstract : Approximate dynamic programming (ADP) is a model based control technique suitable for
nonlinear models. Application of ADP to distributed parameter systems (DPS) which are described by partial
differential equations is a computationally intensive task. This problem is addressed in literature by the use of
reduced order models which capture the essential dynamics of the system. Order reduction of DPS described by
hyperbolic PDEs is a difficult task as such systems exhibit modes of nearly equal energy. In this thesis we
propose a methodology to obtain reduced order model for hyperbolic PDEs using Method of characteristics. The
focus of thesis is thus ADP based control of systems described by hyperbolic PDEs using reduced order models
from Method of characteristics (MOC). Typical examples from chemical engineering systems involving one, two
and three characteristics are studied. The proposed method is able to reduce the order of hyperbolic PDE
significantly and the use of this reduced order model in ADP based setup shows several advantages in both
performance and computational load.
Skills :
Sufficient knowledge in Advanced process control like Model Predictive Control and currently working
in the area of Approximate Dynamic Programming.
Have sufficient knowledge in MATLAB for handling independent simulation projects involving coding in
MATLAB.
Have fair amount of working knowledge in SIMULINK Toolbox and MPC Toolbox.
Exposure and working knowledge in Chemical Process simulators like ASPEN PLUS & ASPEN
PROPERTIES.
Have expereince in working with CFD pacakage like FLUENT and GAMBIT.
Research interests :
Advanced Process control,
Process Modeling and Simulation
Areas of interest : Advanced Process control, Process Modeling and Simulation
Publications/Conferences :
1. A Paper titled вЂњApplication of Approximate dynamic programming based control to hyperbolic PDE
systems using reduced order model from Method Of Characteristics" is submitted as invited paper to
Computers and Chemical Engineering on 15th Sep, 2012.
2. A Poster titled вЂњ Approximate Dynamic Programming based control for Water Gas Shift reactorвЂќ is
accepted and presented in 11th International Symposium on Process Systems Engineering
(PSE2012) held in Singapore between 15th to 19th July 2012.
3. A Paper titled вЂњApplication of Differential Transform to Optimal control problemsвЂќ is accepted and
presented in second international conference on Advances in control and optimization of Dynamical
systems (ACODS 2012) held in IISc, Bengaluru between 16th to 18th Feb, 2012.
4. A Poster titled вЂњModel order reduction and design of MPC for Hyperbolic distributed parameter
systemвЂќ is accepted and presented in International symposium вЂ�Recent and Emerging Advances in
Chemical Engineering (REACH 2010) held in IITM, Chennai between 2 - 4th December 2010.
About me :
Looking for a challenging job, where I can contribute my knowledge and experience in process modeling and
simulation and improve my skills in Chemical Engineering. I am interested know the real time application of
process modeling and simulation, advanced process control etc. Since my graduation, my projects and courses
have been revolving around modeling and simulation. I hope my experience suits the job and i assure that my
knowledge and work will benefit to the development of the company.
Education :
B.Tech Chemical Engineering, 2001-2005
M.Tech Petroleum Regfining and Petrochemical Engineering, 2005 - 2007
E-mail id : simulation.sudhakar@gmail.com
Nabil M
Doctor of Philosophy (PhD)
Department of Chemical Engineering
Guide : Dr. Sridharakumar Narasimhan
Title of thesis : Measurement selection for optimal process operation
Thesis abstract : Sensor Network Design: The fundamental problem in optimal sensor network design is
choosing a set of important or strategic process variables to be measured. An optimization formulation for sensor
network design that relates process economics and data reconciliation is proposed. To address this, an economic
quantity is defined to quantify the loss of operational profit caused due to measurement uncertainty. The resulting
analytical expression that quantifies the loss is shown to be the sum of weighted error variances of the reconciled
estimates obtained from reconciliation. The final formulation is a mixed integer cone program that can be solved
to obtain a globally optimal sensor network. The effect of the process economics, capital cost, and marginal utility
of additional sensors is illustrated using case studies. Economic operating point selection. This paper discusses
the minimum backed o operating point selection problem based on process economics. In this work, we consider
the case where the nominal operating point is not completely constrained, i.e., there are some unconstrained
degrees of freedom or manipulations available. In this regard, we propose a stochastic formulation that ensures
feasible dynamic operating region within the prescribed condence limit. Furthermore, the formulation also finds
a suitable multivariable controller to achieve economic benets. The problem is nonlinear and non-convex and
hence an iterative solution procedure is proposed such that at each step in the iteration, a convex problem is
solved. Finally, the approach is illustrated using an evaporation process.
Skills :
Criticallly analyse the problem and the obtained solution
Can work both as a team and independently
Can lead a team in research
Research interests :
Process Modelling and Simulation
Process Optimization (in particular, Convex optimization)
Process Monitoring and Control
Areas of interest : Process modelling, Process Analysis, CFD Simulation, Controller design, Process
Optimization, Convex optimization
Publications/Conferences :
M. Nabil and S. Narasimhan, вЂњSensor netwrok design for optimal process operation based on data
reconciliation вЂќ, Ind. Eng. Chem. Res., 2012, 51 (19), pp 6789вЂ“6797
M. Nabil and S. Narasimhan, вЂњIntegrated Sensor Network DesignвЂќ, Computer Aided Chemical
Engineering, Volume 31, 2012, Pages 1522-1526.
M. Nabil, S. Narasimhan and S. Skogestad, вЂњEconomic back-off selection based on optimal multivariable
controllerвЂќ, in 8th IFAC symposium on Advanced Control of Chemical Processes (ADCHEM) , 2012,
Volume 1, Pages 661-666.
M. Nabil, S. Narasimhan and S. Skogestad, вЂњMinimum Backed-off Operating Point SelectionвЂќ, in
17th Nordic Process Control Workshop , Jan. 25-27, 2012, Denmark.
M. Nabil and S. Narasimhan, вЂњSensor Network DesignвЂќ, in Recent and Emerging Advances in Chemical
Engineering 2010, IIT Madras, Chennai, India.
M. Nabil and S. Narasimhan, вЂњDesign of Optimal Sensor Network based on Economic ObjectivesвЂќ, in
AIChE Annual Meeting 2010, Salt Lake City, US.
M.Nabil and T.Renganathan, вЂњCFD Simulation of Liquid Solid Fluidized BedвЂќ, in CHEMINSIGHTвЂ™09, at
IIT Kharagpur, India
About me :
Following are my achievements:
Yggdrassil financial grant (29% Acceptance rate) given by the Research Concil of Norway for 10 months
of research stay at Norwegian University of Science and Technology, Norway .
M.R.Krishnan memorial medal for best academic performance in B.Tech.
Certificate of Award for obtaining Second rank in M.Tech.
Awarded Half Time Teaching Assistantship (HTTA) during my M.Tech. programme
Education :
Ph.D. Chemical Engineering, 2009-till now, IIT Madras, Chennai
M.Tech Chemical Engineering, 2007-2009, A.C.Tech Campus, Anna University, Chennai
B.Tech Petrochemical TEchnology, 2003-2007, School of Engineering and Technology, Bharathidasan
University, Trichy.
E-mail id : nabil123@gmail.com
Abhinav Garg
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Dr. Arun K. Tangirala
Title of thesis : Causality analysis of interactions in control loops
Thesis abstract : The main objectives of the project are: to formulate the process connectivity problem and
develop a method for interaction assessment of multivariable control systems.
Skills :
Scientific computation: MATLAB
Time-series analysis: R
Programming languages: C
Others: LaTeX, MS Office
Research interests :
Time-Series Analysis
System Identification
Control Systems
Signal Processing
Process Optimization
Areas of interest : control system, System Identification, Time Series Anlysis, Advanced Process control,
Process Optimization
About me :
I am an ambitious and optimistic person with an acute belief in knowledge and learning. I pursue my ambitions to
master useful conceptual skills and acquiring vision and leadership to help my organization grow monotonically,
amid enjoying a sense of accomplishment in all my professional endeavors.
Education :
B.Tech in Electronics and Instrumentation Engineering, 2007-2011, MIET Meerut (U.P).
E-mail id : abhinavgarg.ei@gmail.com
B. Hari Krishna Reddy
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Prof.R.Nagarajan
Title of thesis : Modeling and CFD Simulation of Enhanced Spray Drying Process
Thesis abstract : Spray drying is a widely used unit operation to dry aqueous or organic solutions, emulsions
etc., in industrial chemistry and food industry. Dry milk powder, detergents and dyes are few examples of currently
available spray dried products. A three dimensional Computational Fluid dynamic model is developed for
simulation of the laboratory spray drying process fitted with pressure and ultrasonic nozzle for a relatively heat
sensitive product to enhance the drying efficiency and the quality of the product. An Eulerian/Lagrangian
approach is considered to investigate the particle drying histories inside the drying chamber
Skills :
Computational Softwares
Scientific Application
Programming Languages
: ANSYS CFX and FLUENT, ICEM, GAMBIT, Aspen
: MATHEMATICA, MATLAB, Minitab
: Basics of FORTRAN, C
Research interests :
Computational Fluid Dynamics
Multiphase Flow
Process Analysis and Simulation
Heat, Mass and Momentum transfer
Particle Characterization
Areas of interest : CFD and it's application to chemical engineering processes, Modeling and Simulaion, Sprays
and atomization, Heat and Mass Transfer, Ultrasonics, spray drying
Education :
B.Tech Chemical Engineering, 2006-2010, S.V.U.C.E, Tirupati, A.P.
E-mail id : hari2che@gmail.com
Dhivakar G
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Dr.R.RaviKrishna
Title of thesis : Effect of Non Aqueous Phase Liquids (NAPLs) On The Transport Of Pollutants In Earthen Porous
Media
Thesis abstract : A large number of contaminated sediment and soil sites contain significant amounts of NAPLs
(non aqueous phase liquids). The presence of NAPL can by itself be considered as a pollutant and in addition the
NAPL phase can influence the transport of other organic pollutants present in the system. Our study aims at
understanding the mechanism of the effect of NAPL on the pollutant transport in the porous media (Soil and
Sediment).
Skills :
Microsoft Office
Aspen
Matlab
Research interests :
Pollutant Transport in Environnment
Environment Monitoring and Analysis
Mass Transfer
Heat Transfer
Areas of interest : Heat and Mass Transfer, Environmental Monitoring and Analysis, Waste Management.
About me :
Energitic person looking forward to learn more and utilize the obtained skills in a creative and productive way.
Education :
B.Tech Chemical Engineering, 2005 - 2009, A C Tech, Anna University, Guindy Campus.
E-mail id : dhivakar.g@gmail.com
Gokul Siva Sankar G
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Dr. Sridharakumar Narasimhan & Dr. Shankar Narasimhan
Title of thesis : Distributed model predictive control of water supply networks
Thesis abstract : Optimal operation of urban water supply networks (WSNs) is based on optimizing one or more
performance metrics while meeting consumer demands and satisfying supply side and storage constraints. This
can be achieved by implementing advanced control schemes such as model predictive control (MPC) that works
on the simulation вЂ“ optimization framework. Given the fact that urban WSNs are very large scale complex
systems with high interactions, obtaining an optimal control strategy with a centralized MPC requires tremendous
computational effort and is time consuming. In this work, a distributed model predictive control (DMPC) scheme
for WSNs is proposed. WSNs are partitioned into sub-networks and a local MPC is deployed to provide control
strategies for each sub-network. Local MPCs use serial coordination scheme to cooperate with other agents in the
decision making process. With the alarming decrease in fresh water supplies, the primary focus of control
strategies should be to conserve water. A novel control strategy that can handle both water sufficient and deficient
cases is proposed for WSNs with storage facilities.
Skills :
Sound technical knowledge in Model Predicitve Control and Process Optimization
Expertise in technical computing softwares like Matlab and Mathematica
Experience in using other technical software packages like Labview and R
Good programming skills in C & C++
Research interests :
Advanced Process Control
Process Modelling & Simulation
Process Optimization
Robotics and control
Areas of interest : Advanced Process control, Process Modelling & Simulation, Process Optimization, Time
Series Analysis, Robotics and Control
Publications/Conferences :
G S Sankar, S Narasimhan and S Narasimhan, Online Model Predictive Control of Municipal Water Distribution
Networks, 11th International Symposium on Process Systems Engineering , volume 31 of Computer Aided
Chemical Engineering, pages 1622-1626, Elsevier, 2012.
About me :
I'm a flexible person and regular at work. With the experience I have gained during my Master's degree, I have
grown myself into a more dependable problem solver.
Education :
B.E Electronics & Instrumentation Engineering, 2006-2010, Velammal Engineering College, Chennai.
E-mail id : gokul.sivasankar@gmail.com
Hemalatha
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : DR.A.KANNAN & DR.SEHSA TALPA SAI
Title of thesis : Enhancement of Extraction of Black Tea Constituents using Ultrasound.
Thesis abstract : Quantify the effects of ultrasonic frequency and power levels on the extraction of key tea quality
marker compounds. Investigate the magnitude and relative importance of the operational variables such as
ultrasonic power, frequency, temperature and tea particle size. Perform repeats of experiments in order to
statistically confirm the absence or presence of the effect of the variables studied (listed in part b.) Develop
correlations and ANOVA tables based on the statistical analysis carried out. Compare the effects of ultrasound
extraction with a conventional tea extraction protocol to quantify the extent of enhancement by using ultrasonic
energy. Develop a mathematical model to account for both internal and external mass transfer resistances in tea
extraction.
Skills :
Know Design Software-Minitab
Know to handle HPLCl, UV-VIS Spectrophotometry, Refractive index, Densitometer
Research interests :
Computational fluid dynamics
modelling
Areas of interest : Fluid Mechanics, Heat transfer
About me :
Hemalatha
CH10S002
Master of Science by research (MS)
Chemical Engineering Department
IITM
Education :
MS (by Research) Chemical Engineering, Jan 2010-Dec 2012, IITM
B.Tech Chemical Engineering, 2002-2006, Pallavan College of engg.
E-mail id : hemalatharadhakrishnan1985@gmail.com
Sreenita Bhattacharya
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Prof. R. Nagarajan
Title of thesis : "Optimization of acoustic fields for nanoemulsion formulation by quantitative and qualitative
characterization techniques"
Thesis abstract : Nano-emulsions form attractive systems in products such as polymerization reaction media to
obtain nano-particles in chemical industries, as nano-encapsulators to harness controlled delivery of additives in
processed food in food industries, as potent nano-colloidal drug carriers and coating material for tablets in
pharmaceutical industries, in cosmetics as personal care formulations, as eco-friendly pesticide delivery systems
in agro industries, as larvicidal and anti microbial agents, as disinfectants, in adjuvant vaccine development, etc.
My preliminary work included producing an Oil-in-Water emulsion with droplet size range of 10 nm - 500 nm using
tank-type ultrasonicators, which enable scale-up at an industrial level while consuming less time. My next focus
was to prepare nanoemulsions using minimum amount of surfactant via surface tension analysis, thus making the
process more cost-effective. The final part of my work includes optimization of various acoustic field parameters
such as frequency, power, time & temperature by analysis of quantitative characteristics (size, stability, pH,
microscopic studies, surface tension, viscosity, zeta potential, conductivity and refractive index) as well as
qualitative analysis (anti-microbial property) of nanoemulsion samples, thus validating the entire process.
Skills :
Computer Profieciency:
Programming Language: Basics of C, C++
Operating Systems: Windows 95/98/Me, Windows NT/2000/2003/2008, Windows XP/Vista.
Instrumentation: Skilled in instrumentation of Dynamic Light Scattering instrument (DLS), Acoustic Particle
Sizer (APS), AAS, GC-MS, HPLC, Viscometer, Tensiometer, Refractometer, Densitometer, Optical
microscope, AFM and TEM.
Research interests :
Energy and Environmental Sustainability (alternative fuels, bio-fuels, etc.).
Nanotechnology and Nano-biotechnology.
Ultrasonics.
Pharmaceutical science (drug delivery, formulation, etc.).
Areas of interest : Energy and Environmental Sustainability (alternative fuels, bio-fuels, etc.), Nanotechnology
and Nano-biotechnology, Ultrasonics, Pharmaceutical science (drug delivery, formulation, etc.).
About me :
Sound education background.
Significant practical experience.
Strong problem-solving skills.
Enthusiastic, self-motivated, hands-on results driven researcher.
High level of commitment and business acumen.
Strong team-worker.
Quick to adapt to new environments and research technologies.
Effectively prototype my ideas.
Education :
B. Tech Biotechnology, 2006-2010, Vellore Institute of Technology University.
MS Chemical Engineering, 2011-2013, IIT Madras.
E-mail id : sreenitabh@yahoo.co.in
Vikas Jaggi
Master of Science by Research (MS)
Department of Chemical Engineering
Guide : Dr. Sreenivas jayanti
Title of thesis : High Efficiency , High Temperature PEM fuel cell power unit, auto-thermally integrated with an
ethanol reformer.
Thesis abstract : The Fuel Cells are the energy devices for the future. There most widely used fuel cells are PEM
(protone exchange membrane) fuel cells due to their various advantages in operatability and high energy density.
They are mainly of two types high temperature(HT) and low temperature(LT) PEM fuel cells. The main fuel for the
fuel cells is hydrogen gas. But due to almost nil hydrogen in our atmosphere and no present distribution and large
scale production system, hydrocarbons are mainly looked into for producing hydrogen for fuel cells. Out of all
hydrocarbons, ethanol is best suited for the job, and is highly researched for hydrogen production for fuel cells.
My project is developing an ethanol based integrated, auto-thermal reformer system for HT-PEMFC, which has
certain advantages over LT-PEMFC. This high efficiency system along with electric output produces high
temperature flue gases as well. These flue gases have been used to produce further electric energy by integrating
this system to secondary systems of LT-PEMFC ethanol reformer system and also with Combined Cycle Gas
Turbine(CCGT System) and Steam Power Cycle for high overall efficiency. Optimization studies have been
carried out for all the integrated systems to find out the best operating conditions for the system.
Skills :
Proficient in: ASPEN Plus, Matlab
Working knowledge of : ASPEN Dynamics, Fluent
Operating Systems: Windows, Linux
Research interests :
Fuel Cells
Clean Energy
Ethanol reforming for hydrogen production
integrated reformer for fuel cells
High-Temperature Pem fuel cells
Areas of interest : Fuel Cell Technology, Energy and Environmental Sustainability (alternative fuels, energy
conversion technologies, Renewable Energy
Publications/Conferences :
None
About me :
Objective :
To use my skills gained over the graduate and post-graduate level to full potential and hone my skills in a
technically challenging environment.
Recognitions:
Member ofACID (Association for Chemical Intellect and Developer) Society ,chemical engineering
technical society at Thapar University(Btech).
Organizing member for National level Symposium for Chemical Engineers , Thapar University, 2008
Winner of first prize in inter school painting competition in Shimla city at school level.
Represented hostel and branch in intra-campus cricket, badminton and tennis matches.(MS)
Education :
BE in Chemical Engineering
Thapar University, Patiala 2005-2009
E-mail id : vikas5586@gmail.com
Department of Chemistry
Amrita Srivastava
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. D. Loganathan
Title of thesis : Synthesis and Biophysical Study of 1-N-Alkanamido-, Sulfonamido- & Guanidinoacetamido
Sugars as N-Glycoprotein Linkage Region Analogs
Thesis abstract : abstract Glycan chains of glycoproteins serve not only as recognition determinants but also
influence protein folding. Elucidation of the molecular basis of their biological roles is a challenging problem in
structural glycobiology. The linkage region constituents, 2-acetamido-2-deoxy-?-D-glucopyranose (GlcNAc) and
L-asparagine (Asn), are conserved in all eukaryotic N-glycoproteins. Elucidation of the conformation of the Nglycoprotein linkage region and the molecular basis of intramolecular glycan-protein interactions is of fundamental
importance considering that motion of the GlcNAc-Asn linkage can profoundly influence the presentation of the
glycan chains on the cell/protein surface. As part of a major program aimed at understanding the structural
significance of the constituents of the conserved N-glycoprotein linkage region, our laboratory demonstrated for
the first time the effect of structural variation in the linkage region sugar and its aglycon moiety, among several
N-(?-D-glycopyranosyl)alkanamides, on the N-glycosidic torsion, fN (O5вЂ“C1вЂ“N1вЂ“C1вЂ™). This study showed that fN
is influenced to a larger extent by the structural variation in sugar part than that of the aglycon moiety. As part of
above mentioned program, several novel mono- as well as disaccharide alkanamides have been designed as
models and analogs of the linkage region of
N-glycoproteins, by varying the sugar as well as the
aglycon group, and synthesized, during the present study, successfully in reasonable yields. Neutron diffraction
analysis of N-(?-D-glycopyranosyl)alkanamides has enabled the accurate determination of hydrogen atom
positions. This study has unequivocally confirmed our earlier finding on the occurrence of antiparallel double
pillared bifurcated hydrogen bond in the case of model compound GlcNAc?NHAc and its absence in
GlcNAc?NHPr. The correct localization of hydrogen atoms in neutron crystal structures has unraveled the
occurrence of hydrophobic H???H contacts. These structures will be of interest for testing and improving force
fields in order to develop better tools for the modeling of N-glycoproteins. In order to understand the influence of
protection on molecular conformation and packing, three fully acteylated GlcNAc alkanamides have been
synthesized starting from the per-O-acetylated GlcNAc azide and their crystal structures have been solved.
Comparative analysis of these structures with those of free sugar amides reported earlier showed that
conformation of the amido aglycon moiety is not altered significantly by the masking of hydroxyl groups in the form
of acetates. The bifurcated antiparallel pattern involving NвЂ“H???O and CвЂ“H???O hydrogen bonds, a hallmark of
the N-glycoprotein models GlcNAc?NHAc and GlcNAc?Asn, is absent in all of the fully protected title alkanamides.
X-ray crystallographic analysis of alkanamides of pentopyranoses derived from ribose and arabinose revealed
that of fN (O5вЂ“C1вЂ“N1вЂ“C1вЂ™) value for Rib?NHAc varies upto ~16В° as compared to Xyl?NHAc. Replacement of
carboxamide with the much more stable sulfonamide group is a well-known concept in medicinal chemistry.
Several sugar sulfonamides, which are very interesting glycosylasparagine mimetics, have been synthesized in
good yields to explore the effect of bio-isosteric replacement of carboxamide group by sulfonamide on the Nglycosidic torsion fN as well as molecular assembly. Among all the compounds synthesized, crystal structures of
eight sulfonamido derivatives have been solved. X-ray crystallographic investigations of synthesized sulfonamides
revealed several interesting features. The N-glycosidic torsion angle fN varies from a value of -73.5В° for molecule
A of Man?NHSO2CH3 to a value of -97.0В° for GlcNAc?NHSO2CH3. Comparison of these values with the fN
value of GlcNAc?NHAc showed that torsion angle fN (O5-C1-N1-S1) does not vary significantly by changing the
carboxamido group to sulfonamido moiety. The b-glucosyl linkage to the guanidine group of arginine (Arg) is
found in amylogenin, a glycoprotein from sweet corn. Such linkage is a rare example of
N-glycosyl bond.
Design and synthesis of mimetics of the unusual N-glycosidic linkage (Glc?Arg) with a spacer between the
glycosyl residue and the guanidine moiety was done by the reaction of appropriately protected sugar unit
containing a free amino group with suitably functionalized bis-Boc-thiourea. Two types of spacers, acetamido and
triazole moieties were chosen. Synthesis of N-glycosylarginine with an amido linker was also achieved during the
present study.
SUMMARY OF PROFESSIONAL EXPERIENCE
Five years of experience in multi-step organic synthesis and analysis including structure based
synthesis of glycoproteins models and analogs using chemical methods.
Trained in a variety of synthetic techniques including: substrate- and reagent-directed stereoselective
methodology and solution-phase synthesis.
Extensive knowledge and experience in structural studies of organic molecules by NMR (1H, 13C, 2DNMR {COSY, HSQC and HMBC), FT-IR, UV-VIS, ESI-MS, MALDI-TOF MS and X-ray crystallography.
Technical experience in organic synthesis, medicinal chemistry and analytical
chemistry.
COMPUTER SKILLS
Experienced with computer software including, ORIGIN 8.0, CS ChemDraw 11.0, Endnote, X-ray
programs (SHELX-97, Wingx and Mercury 2.3 programs obtained from CCDC).
SELECTED RESEARCH SKILLS
Synthesis of N-glycoprotein linkage region model & analogs designed to be anti-diabetic agents.
X-ray crystallographic investigation and Neutron diffraction analysis of the models and analogs.
TEACHING EXPERIENCE
Proven ability as supervisor for one master research projects for M. Sc. thesis.
As teaching assistant to teach and help in experiments during practical classes in organic chemistry for
M. Sc. and B. Tech. students.
As teaching assistant to assist B. Tech students in organic chemistry course.
Completed Bachelor of education teacherвЂ™s training programme (B. Ed).
Research interests :
Synthetic organic chemistry
Conformational analysis by NMR, X-ray crystallography.
Areas of interest : Synthetic organic chemistry, Carbohydrate chemistry
Publications/Conferences :
PUBLICATIONS
Cioci, G.; Srivastava, A.; Loganathan, D.; Mason, S. A.; PГ©rez, S.; Imberty, A. Low Temperature Neutron
Diffraction Structures of N-Glycoprotein Linkage Models and Analogs: Structure Refinement and
Trifurcated Hydrogen Bonds, J. Am. Chem. Soc., 2011, 133, 10042-10045.
Srivastava, A.; Varghese, B.; Loganathan, D. X-Ray Crystallographic Investigation of Fully Acetylated N
-(2-Deoxy-2-acetamido-b-D-glucopyranosyl)alkanamides as N-Glycoprotein Linkage Region Analogs. J.
Carbohydr. Chem., 2012, 31 (1), 31-47.
Srivastava, A.; Varghese, B.; Loganathan, D. Synthesis and X-ray Crystallographic Investigation of N-(Dpentopyranosyl)alkanamides as N-Glycoprotein Linkage Region Analogs. Manuscript under preparation.
Srivastava, A.; Loganathan, D. Synthesis of N-(b-D-Glycosyl)guanidinoacetamides and Guanidine Linked
N-Glycosyl Amino Acids. Manuscript under preparation.
Srivastava, A.; Loganathan, D. Synthesis and X-Ray Crystallographic Investigation of N-(?-DGlycopyranosyl)sulfonamides. Manuscript under preparation.
About me :
Myself, Amrita Srivastava from Kanpur, Uttar Pradesh.
I have done my schooling in 1999 and subsequently joined Bachelors of Science. The years invested in pursuing
my undergraduate studies were the most pivotal period of my life and significantly shaped my career path. I have
joined Masters of Science (M.Sc.) in chemistry where I learned how to apply theoretical concepts to practical
problems and develop concrete solutions. I am a bright student who was always among the top 1 % students of
class. I am also holder of the state scholarship due to excellent academic record. I was awarded gold medal
during my M.Sc.
To further pursue my career in science, I cleared national level fellowship exam (CSIR-JRF) for research in
science Since 2006, I have been doing research work under the guidance of Prof. D. Loganathan at the
Department of Chemistry.
My strength is I have positive attitude, quick learner and ability to work with the same amount of zeal at any time
of the day.
That's all about me.
Education :
EDUCATIONAL QUALIFICATIONS
Doctoral Studies (July 2006-Present): Ph. D. in Organic Chemistry, Department of Chemistry, Indian
Institute of Technology Madras, India. Principal Investigator: Prof. D. Loganathan.
Thesis title: вЂњSynthesis and Biophysical study of 1-N-Alkanamido-, Sulfonamido-, and
Guanidinoacetamido Sugars as Linkage Region Analogs of N-Glycoproteins.вЂќ
Ph.D. (Organic Chemistry)
IIT Madras, India
2006-Pursuing*
9.0/10 (CGPA)
M. Sc. (Chemistry)
C.S.J.M. University, Kanpur, India
2005
67.2 % (1st rank in Department)
B. Sc.(Chemistry, Biology)
C.S.J.M. University, Kanpur, India
2002
77.5% (5th rank out of 306 students)
Intermediate (XII)
U. P. Board, India
1999
73 % (3rd rank out of 600 students)
High School (X)
U. P. Board, India
1997
75 % (2nd rank in School)
E-mail id : amritasrivastavaster@gmail.com
B. Kuppan
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. P. Selvam and Prof. B. Viswanathan
Title of thesis : вЂњPlatinum-supported Mesoporous Carbon as Electrocatalysts for DMFCsвЂќ.
Thesis abstract : Architectural modulations in solid systems have been a research fantasy in recent years, ever
since; the Mobil group came up with mesoporous silicates in the early 90s using micellar templates. Template
assisted synthesis of porous materials has seen considerable developments in the last 20 years. In fact, this
area has become a continuing endeavor in material science research, that new mesoporous materials are
designed and prepared at regular intervals exploiting all kinds of micelles and also other possible synthetic
strategies. Among the various possible systems, silicates and carbon materials have attracted considerable
attention in recent years due to the possibility of exploiting them for various applications including catalysis. The
biggest scientific challenge in the 21th century is to develop a green chemical process and new alternative energy
sources that can replace the fossil fuels. In this regard, the ultimate goal of our research is focused to synthesize
nanoporous materials such as mesoporous silicas, carbons, and Nitrogen containing carbon materials that can be
used for advanced applications in the production of alternative energy sources and in the green chemical
processes.
This present work therefore attempts to highlight some of the salient aspects on these materials as
follows: (i) The possible synthesis strategies for these materials and the logic and science behind the procedures
adopted. (ii) The physico-chemical characterization of these materials and the generalities that is possible. (iii)
Applications of Pt nanoparticles supported mesoporous carbons in DMFCs.
Skills :
Excellent knowledge in Material synthesis.
Well trained in analytical techniques such as XRD, XPS, TPR/TPD, Pulse Chemisorption, and Cyclic
Voltammetry.
Good knowledge in chemical data interpreting.
Strong technical, analytical skills and good leadership qualities.
Research interests :
Heterogeneous Catalysis
Material Science and Fuel Cells
Surfactant Chemistry and Ordered Porous Solids
Areas of interest : Material Synthesis, Fuel Cells, Catalysis, and Characterization Techniques.
Publications/Conferences :
Publications
1. Kuppan, B. and Selvam, P. (2012). Platinum Supported Mesoporous Carbon (Pt/CMK-3) as Anodic
Catalyst for Direct Methanol Fuel Cells: Effect of Preparation and Deposition Methods. Prog. Nat.Sci.:
Mater. Int. (revised).
2. Selvam, P. and Kuppan, B. (2012). Synthesis, Characterization and Electrocatalytic Properties of NanoPlatinum-supported Mesoporous Carbon Molecular Sieves, Pt/NCCR-41. Catal. Today (in Press:
http://dx.doi.org/10.1016/j.cattod.2012.06.033).
3. Kuppan, B., Viswanathan, B., and Selvam, P. (2012). Platinum-supported nitrogen-doped ordered
mesoporous carbon (Pt/NCMK-33) as electrocatalyst for direct methanol fuel cell applications. Prepr.
Symp. вЂ“ Am. Chem. Soc., Div. Fuel Chem. 57, 751-752.
4. Beck, A., Magesh, G., Kuppan, B., Schay, Z., Geszti, O., Benko, T., Viswanath, R.P., Selvam, P.,
Viswanathan, B., and Guczi, L. (2011). Specific role of polymorphs of supporting titania in catalytic CO
oxidation on gold. Catal.Today 164, 325-331.
Papers Presentation (International)
1. B. Kuppan, B. Viswanathan, and P. Selvam (2008) вЂњSynthesis of Novel Nanoporous Carbon NCCR-41вЂќ
NANO-2008, June 1-6, 2008, Institute of Technical Sciences, Rio-de-Janeiro, Brazil.
2. P. Selvam, B. Viswanathan, and B. Kuppan, (2008) вЂњNanoporous Carbon Supported Platinum
(Pt/NCCR-41) Electrocatalyst for Methanol OxidationвЂќ June 11-13, 2008, XXI National Meeting of the
Portuguese Chemical Society, Porto, Portugal.
3. P. Selvam, B. Viswanathan and B. Kuppan (2009) вЂњPlatinum supported Nanoporous Carbon / Nitrogen
containing Carbon Molecular Sieves: Promising Electrocatalyst for Methanol Fuel Cell ApplicationвЂќ,
ICMAT-2009, June 28-July 3, 2009, Material Society Research, Singapore.
4. B. Kuppan, B. Viswanathan and P. Selvam (2011) вЂњPlatinum Supported Ordered Nanoporous Carbon
(NCCR-41) as promising Electrocatalyst for Methanol Fuel Cell ApplicationвЂќ, World congress on
Engineering and Technology, October, 28-30, Shanghai.
About me :
My strength are self confidence, I can easily adopt myself to any environment, positive attitude and hard
work.
My weakness is over enthusiastic.
My short term goal is enter into reputed organization.
My long term goal is to be a Head/lead in a leading organization.
Education :
PhD with Prof. P. Selvam and prof. B. Viswanathan - 2006-2012, IIT Madras.
MSc. Chemistry 2004-2006, Loyola College, Chennai.
BSc. Chemistry 2001-2004, Loyola College, Chennai.
E-mail id : kupps83@gmail.com
Manas Ranjan Dash
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Dr. B Rajakumar
Title of thesis : Kinetics and spectoscopic investigation of Biogenic Volatile Organic Compounds (BVOCs)
Thesis abstract : Kinetics and spectoscopic investigation of Biogenic Volatile Organic Compounds (BVOCs)
Skills :
Gas Chromatography (GC)
Nd:YAG pumped dye laser
FT-IR
Gaussian 09
Polyrate 2008
Igor
Origin
Chemcraft
Research interests :
Experimantal Physical Chemistry
Gas Phase Kinetics
Cavity ring down Spectroscopy
Computational Chemistry
Areas of interest : Kinetics study using Laser Induced Fluoresence (LIF)
Publications/Conferences :
Journal Publications:
Dash M. R.; Rajakumar, B. вЂњAbstraction Kinetics of H-Atom by OH Radical from Pinonaldehyde
(C10H16O2): Ab Initio and Transition-State Theory Calculations.вЂќ J. Phys. Chem. A 2012, 116,
5856-5866.
Conferences:
Dash M. R.; Rajakumar, B. вЂњRate Coefficients for the Reaction of OH radical with Pinonaldehyde
(C10H16O2) between 200 and 400 K: Ab Initio and Transition State Theory Calculations.вЂќ Poster
presentation at Chennai Chemistry Conferences-2011, February 11-13. 2011.
Dash M. R.; Rajakumar, B. вЂњExperimental and theoretical investigations for the gas-phase reactions of OH
radical with ?-pinene and ?-pinene.вЂќ Poster presentation at 22nd International Symposium on Gas Kinetics
at Boulder, Colorado, USA, June 18-22, 2012.
Dash M. R.; Rajakumar, B. вЂњExperimental and theoretical rate coefficients for the gas-phase reactions of
OH radical with ?-pinene and ?-pinene.вЂќ Theme meeting on Recent Trends in Analytical Chemistry
(TRAC-2012)" Poster presentation at University of Madras, Chennai, August 30-31, 2012.
Education :
B.Sc Chemistry, 2003-2006, Sambalpur University
M.Sc Chemistry, 2006-2008, Sambalpur University
Ph.D Chemistry, 2009 cond. IIT Madras, Chennai
E-mail id : manas.iitm@gmail.com
Manohar Puppala
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. S. Baskaran
Title of thesis : STEREO- AND ENANTIOSELECTIVE SYNTHESIS OF AZATRICYCLIC RING SYSTEMS VIA
DOMINO SEMIPINACOL-SCHMIDT REACTION AND MECHANISTIC INVESTIGATION ON HOOKER
OXIDATION
Thesis abstract : A TiCl4-promoted domino semipinacolвЂ“Schmidt reaction of suitably substituted
oxaspiropentane-azide provides an easy access to bridged as well as angularly fused azatricyclic ring systems,
which possess the azaquaternary center, present in the natural products such as, immunosupressant FR901483,
platelet aggregation inhibitor daphlongeranine B and anti cancer agents 7a-epi-(-)-lepadiformine A and 7a-epi(+)-lepadiformine C. The mechanism involved in the formation of the Hooker intermediate from lapachol via
benzilic acid rearrangement as a key step in the Hooker oxidation has been investigated.
Skills :
Multistep Organic Synthesis, handling and manipulation of moisture, acid and base sensitive compounds.
Handling analytical tools such as, HPLC (Perkin Elmer), FT NMR spectrometer (AVANCE 400 BRUKER), UV-VIS
spectrophotometer (Shimadzu UV-240 model), Polarimeter (Rudolph), Infra-Red spectrometer (Shimadzu IR 470
model & THERMO NICOLET 6700 FT-IR spectrometer).
Research interests :
Development of new synthetic methods and their application in the synthesis of biologically active molecules
Areas of interest : Organic synthesis, Organo catalysis
Publications/Conferences :
1. Puppala, M., Murali, A., Baskaran, S. (2012): Concise enantioselective construction of
bridged azatricyclic
framework via domino semipinacol-Schmidt reaction. Chem. Commun., 48, 5778-5780.
2. Murali, A., Puppala, M., Varghese, B., Baskaran, S. (2011): A Lewis acid mediated Schmidt reaction of
benzylic azide: synthesis of sterically crowded aromatic tertiary amines. Eur. J. Org. Chem., 5297вЂ“5302.
3. Eyong, K. O.; Puppala, M.; Kumar, P. S., LamshГ¶ft, M. and Baskaran, S. A mechanistic study on the Hooker
oxidation: Synthesis of novel indane carboxylic acid derivatives from lapachol (Accepted, Organic &
Biomolecular Chemistry).
Conferences / Seminars
1. P. Manohar and Sundarababu Baskaran, (2008) domino semipinacol- Schmidt reaction based strategy for the
concise stereoselective construction of bridged azatricyclic ring systems present in biologically active natural
products. Indo-German Exchange Programme ILS, Hyderabad, March, 2 -7.
2. P. Manohar and Sundarababu Baskaran, (2009) domino semipinacol- Schmidt reaction based strategy for the
stereo- and enatioselective synthesis of biologically active natural products possessing angularly fused
azatricyclic ring systems. Fifth Junior National Organic Symposium Trust, IIT, Kanpur, December, 4 -7.
PATENTS
1. Senthil Kumar, U. P., Kevat, J. B., Andrew G., Magesh, C. J., Puppala, M., Sivasankaran, V. An improved
process for the preparation of monobactam antibiotic. WIPO Patent Application WO/2007/083187, Application
Number:IB2006/003783, Filed on Dec 28, 2006, Publication date july 26, 2007.
2. Senthil Kumar, U. P., Kevat, J. B., Andrew G., Magesh, C. J., Puppala, M., Sivasankaran, V. An improved
process for the preparation of monobactam antibiotic. Big Patents India 65/CHE/2006 A (65/CHE/2006) Filed
on 2006-01-16, Publication date 2007-11-23.
About me :
Seeking challenging research opportunities in organic synthesis, where, I can apply my knowledge and
experience to come up with simpler solutions even for complicated problems.
Education :
Doctoral Studies (July 2006-2012):
Ph. D. in Organic Chemistry, Thesis title: Stereo- and Eantioselective Synthesis of Azatricyclic Ring Systems via
Domino Semipinacol-Schmidt Reaction and Mechanistic Investigation oN Hooker Oxidation. Department of
Chemistry, Indian Institute of Technology Madras, Chennai, India.
Thesis Superviser: Prof. S. Baskaran.
2002-2004 Master of Science (Organic Chemistry) University 1st rank (Kakathiya University, Gold
medalist)
1999-2002 Bachelor of Science (B.Z.C) First Class (66.0%)
Lal Bahadur college, Warangal, India.
E-mail id : manohariitm@gmail.com
Mathiselvam
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. D. Loganathan
Title of thesis : MODELS & ANALOGS OF N-GLYCOPROTEIN
NEOGLYCOCONJUGATES: SYNTHESIS AND BIOPHYSICAL STUDY
LINKAGE
REGION
AND
Thesis abstract : Carbohydrates (glycans) covalently linked to peptide/protein or lipid form glycoconjugates such
as glycoproteins and glycolipids, respectively. Understanding the structure-function relationship of carbohydrate
mediated interactions with protein/lipid has been a challenging problem in structural glycobiology. The major goals
of the present study are synthesis and biophysical study of models and analogs of N-glycoprotein linkage region
and neoglycoconjugates. The linkage region constituents of eukaryotic N-glycoproteins consist of
2-deoxy-2-acetamido-?-D-glucopyranose (GlcNAc) as the linkage sugar and L-asparagine (Asn) as the linkage
amino acid. Elucidation of the structure and conformation of the linkage region of glycoproteins is of fundamental
importance since the dynamics of the GlcNAc-Asn linkage can influence the presentation of the glycan chain on
the cell surface. The
X-ray crystallographic investigation of glycoproteins is complicated due to the
conformational flexibility of glycan portion. Use of model and analog compounds would be a valuable approach to
understand the effect of structural variations on the linkage region conformation. To this end, several glycosyl
amides have been designed and synthesized as model and analogs of the N-glycoprotein linkage region. To
understand the role of
C2-acetamide group in controlling the N-glycosidic torsion fN & ?2, newer
N-(3-deoxy-3-acetamido-b-D-glycopyranosyl)alkanamides analogs have been synthesized. The crystal structures
of newer C3-acetamido analogs Glc3NAc?NHAc and Glc3NAc?NHPr solved during present study were compared
with those of
C2-acetamido model (GlcNAc?NHAc) and analog (GlcNAc?NHPr) reported earlier. This
study showed that absence of the C2-acetamido group increases rotational freedom around C1вЂ“N1 and C2вЂ™-C3вЂ™
bonds which leads to large variation in the
N-glycosidic torsion values fN and c2. To understand the effect of
carboxylic group on N-glycosidic torsion as well as molecular packing, uronic acid alkanamides and 1-(?-Dglycuronopyranosyl)-4-phenyl-[1,2,3]-triazoles have been synthesized. The crystal structure of the GalUA?NHAc
solved during present study was compared with those reported for N-(?-D-galactopyranosyl)alkanamides. It
revealed that change of the C6 hydroxylmethyl group to carboxylic acid had limited impact on glycosidic torsion,
fN. Disaccharide alkanamide crystal structures solved during present study were compared with the crystal
structure of GlcNAc and Glc alkanamides. It showed that N-glycosidic torsions fN and c2 are influenced by the
presence/absence of C2-acetamido group as well as molecular packing. In the case of GlcNAc alkanamides, the
influence of molecular packing on linkage region conformation is relatively less. Thus the steric effect of
C2-acetamido group is controlling the N-glycosidic torsion values leading to negligible variation in N-glycosidic
torsion values fN and c2. In the case of disaccharide crystal structures, due to the intensive network of hydrogen
bonding, molecular packing becomes a dominant force for controlling conformation which leads to noticeable
variation in fN values and large variation in c2. Sugar-based surfactants are (glycolipids) are widely used as
detergents, personal care products, food, pharmaceuticals, agrochemicals and explosives. These are also used
as low-molecular-mass gelators which have attracted attention due to their impact in the field of molecular
selfвЂ“assembly, smart materials and controlled chemical release. In the present work, various sugar derived
glycolipids with thiourea, urea and amide linkages have been designed and synthesized. Gelation study showed
that thiourea- and urea-linked glycolipids have formed hydrogel. Critical gelation concentration (CGC) for these
hyrogels is less than 1wt % which makes these compounds classified as вЂ�вЂ�super-gelatorsвЂќ. Morphological study
of the thiourea- and urea-linked glycolipids showed that depending on the sugar head group and alkyl chain
length they have self-assembled in water and forming 3D fiber network or ribbons of various sizes (nm).
Interaction of carbohydrates with lectins is an important event for wide range of normal biological processes such
as immune function and fertilization. Hampering this multivalent interaction is important for blocking or influencing
biological processes, such as viral or bacterial infections or even cancer metastasis. In the present work,
pentarerythritol-based per-O-acetylated N-glycoconjugates with thiourea linkage have been synthesized. Their deO-acetylated derivatives will be useful for the study of carbohydrate-protein interactions.
SKILLS
Creative, Self-motivated and independent researcher with good interpersonal and communication skills.
Extensive experience in the synthesis of complex glycoconjugates and organic molecules.
Proficient with operation and interpretation of UV, IR, 1H & 13C-NMR, 2D-NMR (COSY and HSQC,
HMBC).
Semi-preparative HPLC & Ion-chromotography (Dionex).
COMPUTER SKILLS
MS Office, Chem Draw, Origin, SciFinder, Mercury 2.4, Ortep3v2.
TEACHING EXPERIENCE
Assisted Practical Classes for Bachelor and Master Degree Students as part of Teaching Assistantship in
IIT Madras
Assisted Practical Classes for Masters Degree Students in University of Madras
Done one year teacher training program (B.Ed).
Research interests :
Synthesis of naturally occurring carbohydrates and its dreivatives (Oligosaccharides, Glycopeptides,
glycolipids, Glycoclusters).
Total synthesis of heterocyclic and carbocyclic compounds.
Structural studies of carbohydrates (X-ray crystallography).
Areas of interest : Synthetic organic chemistry
Publications/Conferences :
1. Synthesis and X-ray crystallographic investigation of N-(3-deoxy-3-acetamido-?-Dglycopyranosyl)alkanamides as analogs of N-glycoprotein linkage region. M. Mathiselvam, Babu Varghese
and Duraikkannu Loganathan. Glycocon. J. DOI 10.1007/s10719-011-9357-y
2. Zeolite catalyzed selective deprotection of di- and tri-O-isopropylidene sugar acetals. P. Muni Bhaskar, M.
Mathiselvam and Duraikkannu Loganathan. Carbohyd. Res. 2008, 343, 1801-1807.
3. Synthesis of N-Protected/Free Indole-7-Carboxaldehyde. A. K. Mohanakrishnan, R. Balamurugan, N.
Ramesh, M. Mathiselvam and S. Manavalan. Syn. Commun. 2007, 37, 4343-4352.
About me :
I am hard worker and seeking a position that will enable to conduct research in the frontier areas of synthetic
organic chemistry вЂ“ Carbohydrate based natural products to contribute the knowledge to obtain result in high
impact and quality
Education :
Ph. D. in Bio-Organic Chemistry [August 2005вЂ“ Till now] Department of Chemistry, Indian Institute of
Technology Madras, Chennai- 600 036, India.
Title of the Thesis: вЂњModels & Analogs of Glycoprotein Glycans and Neoglycoconjugates: Synthesis and
Biophysical StudyвЂќ
M. Phil [September 2003- August 2004], Department of Organic Chemistry, University of Madras,
Chennai- 600 025, India.
Title of the Thesis: вЂњSynthetic studies on 4 and 7 substituted indolesвЂќ
M. Sc. in Applied Chemistry [2000-2002], Department of Chemistry, Anna University, Chennai-600 025,
India.
B. Sc. in Chemistry [1997-2000], Government Arts and Science College, Karur, Bharathidhasan
University, Truchirapalli, India.
Ancillaries: Physics and Mathematics
E-mail id : mathi24@gmail.com
R. Ramya
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. M.V.Sangaranarayanan
Title of thesis : Electrochemical Synthesis and Applications of Conducting Polymers
Thesis abstract : Polypyrrole spikes, Polypyrrole microfibers, Polyaniline nanofiber dendrites, submicrometer
sized polyaniline spheres and Polythiophene were carried out using Stainless steel, Platinum, gold and glassy
carbon electrodes for supercapacitor and biosensor applications. The electrode materials were characterized
using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared
Spectroscopy (FTIR), Ultraviolet-Visible Spectroscopy (UV-vis), Galvanostatic Charge-discharge, Cyclic
voltammetry (CV), Amperometry and Electrochemical Impedance Spectroscopy (EIS). To quantify the amount of
the various analytes, the Nyquist plots of the EIS were obtained at various frequencies. The electrochemical
conducting polymer sensor exhibited good linear range and low detection limits for various analytes such as
catechol, glucose, dopamine and procaine with a signal to noise ratio of 3.
Skills :
PROFESSIONAL EXPERIENCE
Five years of experience in Electrochemical Synthesis and analysis including structure based synthesis of
conducting polymers.
Trained in a variety of techniques including: Cyclic, differential pulse and sqaure wave voltammetry,
Galvanostatic charge-discharge, Electrochemical Impedance Spectroscopy, Chronoamperometry and
Chronopotentiometry.
Extensive knowledge and experience in structural studies of polymers by SEM, TEM, FT-IR, UV-VIS, ESIMS, MALDI-TOF MS and Powder X-ray crystallography.
Technical experience in chemical and electrochemical synthesis, polymer chemistry and analytical
techniques.
COMPUTER SKILLS
Experienced with computer softwares including, ORIGIN 8.0, CS ChemDraw 11.0, MATLAB.
Research interests :
Electrochemistry of conducting polymers
Applications to supercapacitors, Biosensors, etc
Areas of interest : Electrochemistry, Biosensor, Supercapacitor, Nanomaterials synthesis
Publications/Conferences :
1. R. Ramya and M. V. Sangaranarayanan, Analysis of polypyrrole-coated stainless steel electrodes вЂ“
Estimation of specific capacitances and construction of equivalent circuits J. Chem. Sci., 120 (2008)
25-31.
2. R. Ramya and M. V. Sangaranarayanan, Polypyrrole microfibers synthesized with Quillaja Saponin for
electrochemical sensing of catechol, Sens. Actuat. B: Chem., 173 (2012) 40-51.
3. R. Ramya, R. Sivasubramanian and M. V. Sangaranarayanan, Conducting polymers-based
electrochemical supercapacitors- progress and prospects, Electrochim. Acta. In Press.
4. R. Ramya and M. V. Sangaranarayanan, Electrochemical Sensing of Glucose Using Polyaniline
Nanofiber Dendrites-Amperometric and Impedimetric Analysis, J. Appl. Polym. Sci., In Press.
About me :
Secured All India 177th rank in GATE exam 2005
A carnatic and light music artist also having interest in Hindustani Bhajans
A Republic Day Parade Airwing candidate. Attended RDC camp in 2002 and obtained 'B' grade in 'C'
certificate
Conducted and hosted many events as an Event Manager in and around Coimbatore, Tamilnadu
Have a passion for learning languages
Education :
EDUCATIONAL QUALIFICATIONS
Doctoral Studies (July 2006-Present): Ph. D. in Physical Chemistry, Department of Chemistry, Indian
Institute of Technology Madras, India. Principal Investigator: Prof. M. V. Sangaranarayanan.
Thesis title: вЂњElectrochemical Synthesis and Applications of Conducting PolymersвЂќ
Ph.D. (Physical Chemistry)
IIT Madras, India
2006-Pursuing*
9.0/10 (CGPA)
M. Sc. Chemistry
Govt. Arts College, Coimbatore, India
2003-2005
86 % (1st rank in Department)
B. Sc. Chemistry
Nirmala College, Coimbatore, India
2000-2003
86 % (1st rank in Department)
Intermediate (XII)
Tamilnadu Board, India
2000
E-mail id : ramya.iitm@gmail.com
Sangram Gore
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Prof. S. Baskaran
Title of thesis : DEVELOPMENT OF NEW SYNTHETIC METHODS IN LOW MELTING MIXTURE AND
ASYMMETRIC ORGANOCATALYTIC ALDOL REACTION
Thesis abstract : Low Melting L-(+)-tartaic acidвЂ“urea derivative as an efficient and green medium for the
synthesis of novel dihydropyrimidines, pyrimidopyrimidinediones, indoles, 5-unsubstituted DHPMs and hydantoin
derivatives under mild reaction condition. Development of a D-mannitol based novel C2-Symmetric chiral bisProlinamide catalyst and its application in highly enantio- and diastereoselective organocatalytic aldol reaction.
Skills :
Multistep Organic Synthesis, handling and manipulation of moisture, acid and base sensitive compounds.
Handling analytical tools such as, HPLC (Perkin Elmer), FT NMR spectrometer (AVANCE 500 & 400
BRUKER).
UV-VIS spectrophotometer (Shimadzu UV-240 model), Polarimeter (Rudolph).
Infra-Red spectrometer (Shimadzu IR 470 model & THERMO NICOLET 6700 FT-IR spectrometer).
Research interests :
Development of new synthetic methods and their application in the synthesis of biologically active molecules,
Green Chemistry, Organocatalysis.
Areas of interest : Synthetic organic chemistry, Organocatalysis, green chemistry
Publications/Conferences :
Research Articles:
in low melting
1. Gore, S. M.; Baskaran, S.; Koenig, B. Efficient synthesis of 3,4-dihydropyrimidin-2-ones
tartaric acidвЂ“urea mixtures. Green Chem. 2011, 13, 1009вЂ“1013.
2. Gore, S. M.; Baskaran, S.; Koenig, B. Synthesis of pyrimidopyrimidinediones in a deep eutectic reaction
mixture. Adv. Synth. Catal. 2012, 354, 2368вЂ“2372.
3. Gore, S. M.; Baskaran, S.; Koenig, B. Fischer indole synthesis in low melting mixtures. Org. Lett. 2012, 14,
4568вЂ“4571.
Conferences:
1. Gore, S. M.; Baskaran, S.; Koenig, B. Low melting mixtures as alternative green reaction medium, Oral
presentation at 3rd INDIGO conference in Chennai, February 12-16th 2012.
2. Gore, S. M.; Baskaran, S.; Koenig, B. Enantioselective aldol reaction: Organocatalysis and chiral melts; Poster
presentation at Heidelberg forum of molecular catalysis (HFMC), Heidelberg, November 6, 2009.
3. Gore, S. M.; Baskaran, S.; Koenig, B. Participated in the 2nd German-Indian Symposium on Frontiers of
Chemistry, at Institut fГјr Organische Chemie UniversitГ¤t Leipzig, Leipzig, Germany, September 16-19, 2009.
Education :
Doctoral Studies (July 2006-2012):
Ph. D. in Organic Chemistry, Thesis title: Development of New Synthetic Methods in Low Melting Mixtures
and Asymmetric Organocatalytic Aldol Reaction. Department of Chemistry, Indian Institute of Technology
Madras, Chennai, India. Principal Investigator: Prof. S. Baskaran.
2002-2004
Master of Science (Organic Chemistry) First Class (67.0%)
Supervisor: Dr. B. G. Mahamulkar
Fergusson College, Pune, India.
1999-2002
Bachelor of Science (Chemistry)
Vidya Pratishthans ASC college, Baramati, India.
E-mail id : sangramorg@yahoo.co.in
First Class with Distinction (70.25%)
Srinivasan A
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : PROF.S.SANKARARAMAN
Title of thesis : Synthesis of pyrene based polyalkenyl molecules and study their properties(not fixed)
Thesis abstract : Planar based fused aromatic compounds and their derivaties are more important in materials
science.One such molecule is pyrene, its properties have extensively studied.Attaching the alkenyl esters,amides
and dendrons to planar molecule, it can show pi-pi stacking aggregation in solution and solid state. This
aggregation properties have been widely studied buy using NMR spectrometry, UV-Visible and Fluorescence
spectrometry.
Skills :
NMR,UV-Visible and Fluoresence spectrometer, HPLC instruments handling
good skills in lab reactions such highly inert reaction, air free coupling reactions and separating compounds using
column chromatography
good knowledge in Origin,Chemdraw,Hg ,windows 7 software skills
Good management capacity(orgainised so many confrences and institute programs)
Good communication in English
Research interests :
Synthesis of macromolecules, synthesis of OLED based novel organic molecules, drug synthesis
Areas of interest : Synthesis of macromolecules, synthesis of OLED based novel organic molecules, drug
synthesis
Publications/Conferences :
Synthesis of tetraalkenyl pyrene esters and hexaalkenyl triphenylene esters and study their aggregation
phenomen by calculating thermodyanmic properties by using NMR spectrometry. (manuscript under preparation)
About me :
I want to something good to my environment which I learnt from my academic. Having wide range vision on
society.
Education :
BSc Chemistry 80%
MSc Chemistry 7.69
E-mail id : asrinivasan21@gmail.com
Ujwal Kumar Sarangi
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Bhyrappa, P.
Title of thesis : Beta-Tetra and Octa Substituted porphyrins: Syntheses and their properties.
Thesis abstract : Synthesis and characterisition of new porphyrin and metalloporphyrin molecules. Crystal
structure determination of porphyrin and metalloporphyrins. Physico-chemical properties i.e. solvent dependant
optical absorption spectra, solvent dependant 1H NMR spectra, fluorescence spectra with quantum yield, Nonlinear optics, electrochemistry etc. Cocrystalisation of porphyrins or metalloporphyrins with fullerenes. To study
the short contact of fullerenes with porphyrin in this host-guest chemistry.
Skills :
Professional:
Handling of Uv-Visible spectrophotometer.
Cyclic voltametery, NMR, Spectrofluorimetry, MALDI.
Flash Chromatography instrument.
Other:
Studied DCA course.
Research interests :
Porphyrin and metalloporphyrin Chemistry
Organometalic Chemistry
Application of porphyrins in nano chemistry
Areas of interest : Bioinorganic chemistry, Suprramolecular chemistry, Nano chemistry, Organometalic
chemistry, SEM, TEM, AFM, Fluorescence etc.
Publications/Conferences :
conference
U. K. Sarangi and P. Bhyrappa*. Synthesis and Properties of Antipodally mixed ?-Octasubstituted
Tetraphenylporphyrins. Poster presentation at 13th National Symposium in Chemistry organized by
Chemical Research Society of India, CRSI, February 4-6, 2011 at NISER, Bhubaneswar, India.
U. K. Sarangi and P. Bhyrappa*. вЂњSymmetrically mixed substituted tetraphenylporphyrins: Synthesis and
Properties.вЂќ Poster presentation at 1st Chennai Chemistry Conference, February 11-13, 2011 at IITM,
Chennai, India.
Ujwal Kumar Sarangi, P. Bhyrappa* and B. Varghese. Mixed dodecasubstituted porphyrins: Synthesis,
electrochemical redox and structural properties. Poster presentation at 2nd Chemistry in house
symposium, August 21st, 2012 at IITM, Chennai, India.
journal publications:
P. Bhyrappa*, Ujwal K. Sarangi and B. Varghese; Mixed beta pyrrole substituted meso Tetraphenyl
porphyrins: Structural and Redoxchemical properties. (Manuscript Submitted).
About me :
I am from Bhubaneswar, Odisha. I am a very hard worker with positive attitude and very scilent guy. Use to utilize
my skill in aproprieate place and also i have learning nature.
Education :
B.Sc. Chemistry (hon.), 2000-2003, Utkal University, Odisha.
M.Sc. Chemistry, 2003-2005, Utkal University, Odisha.
Ph. D. Chemistry, 2007- , IIT Madras.
E-mail id : ujal_sarangi@yahoo.com
V K Prasad Jonnalagadda
Doctor of Philosophy (PhD)
Department of Chemistry
Guide : Dr. Santosh J Gharpure
Title of thesis : Stereoselective Approaches to Substituted Tetrahydropyrans, Morpholines and Oxazepanes
Thesis abstract : Amongst cyclic ethers, tetrahydropyran ring is the most common structural motif present in
wide variety of natural products, which exhibit important biological properties. As a result, a number of methods
have been developed for the stereoselective construction of these tetrahydropyran ring systems.1 Among these
intramolecular oxa conjugate addition to an enoate has been extensively used in the synthesis of natural
products. A general strategy was developed for the stereoselective synthesis of 2,6-disubstituted
tetrahydropyrans, employing a Tandem nucleophilic addition-oxa-Michael sequence to aldehydes which contains
appropriate Michael acceptor (Scheme 1).2 Scheme 1 Substituted morpholines and oxazepanes are present in
vast number of therapeutically and biologically active compounds.3 Also the C-substituted morpholines are used
as chiral agents in asymmetric synthesis, due to which there is increase in new methods for the synthesis of Csubstituted morpholines. A general and concise strategy was developed for the stereoselective synthesis of
diversely substituted morpholines, based on reductive etherification strategy (Scheme 2).4 The developed method
was also utilized in the synthesis of natural products Chelonin A and Chelonin C. Scheme 2 The Reductive
etherification strategy was also extended for the stereoselective synthesis of substituted oxazepanes.
Skills :
familiar with computer aspects like Ms word etc.
Handled instruments and familiar with NMR, IR and polarimeter
good interpersonal skills.
Research interests :
Organic Synthesis,
Asymmetric Synthesis,
Natural Product Synthesis
Areas of interest : Synthetic organic chemistry, asymmetric synthesis, natural product synthesis
Publications/Conferences :
1. Gharpure, S. J.; Prasad, J. V. K. J. Org. Chem. 2011, 76, 10325.
2. Gharpure, S. J.; A. M. Sathiyanarayanan; Prasad Jonnalagadda. Tetrahadron Letters 2008, 49, 2974-2978.
About me :
I am an ambitious, smart, well organized, punctual, quick learning person. I have great manners and nice
presence of mind. I am optimistic person with a confidence to solve any type of problem. I can work in a group
with different diversities.
Education :
M Sc- P. B. Siddahartha College, Nagarjuna University, Andhra Pradesh-2003-2005, 66.75%
B. Sc. (MPC)- Andhra Loyola College-Vijayawada, Nagarjuna University, A P, 89%
E-mail id : jvkprasad@gmail.com
Department of Civil Engineering
Aviraj Datta
Doctor of Philosophy (PhD)
Department of Civil Engineering
Guide : Ligy Philip
Title of thesis : Control of VOC emission from manufacturing and application processes of surface coatings
Thesis abstract : The main objective of the study is to develop a biological VOC treatment technology for paint
manufacturing and application processes. Volatile Organic Compounds or commonly known as VOCs are
compounds which easily vaporizes in normal room temperature because of their high vapor pressure and low
solubility. VOC emission propels the process of ground level ozone formation in an urban atmosphere. Some
VOCs like Toluene have proven mutagenic/ carcinogenic effect on human. Paint manufacturing and application
facilities vent out a significant amount of VOCs in the atmosphere. Present abatement techniques such as
adsorption or absorption merely shift the pollutant from air-phase to other matrices rather than actually destroying
it. Incineration though viable for high-calorific value VOCs such as those emitted from petroleum refineries, is
often not economically feasible for low-concentration and high-flow rates associated with many VOC emitting
industries such as surface coating industry. Though industrial emission of Volatile Organic compounds cause
significant effect on the ambient environment. My thesis work includes study the biodegradation kinetics of
common VOCS emitted from paint manufacturing and application facilities such as Methyl Ethyl Ketone (MEK),
Methyl Iso-butyl ketone (MIBK), Toluene, Ethylbenzene and o-Xylene. The study started with acclimatization of
open-mixed aerobic bacterial culture. This acclimatized culture was used for the biodegradation of the VOCs
already mentioned. The study emphasizes on the biodegradation kinetics of these compounds in presence of
each other rather than only as single compound. Bio-kinetic models such as Monod Inhibition models were used
to evaluate the biokinetic parameters of the biodegradation of these five compounds. Further mathematical model
was developed to describe the mixed substrate biodegradation pattern of these compounds. Two type of bioreactors were designed one Bio-trickling filter (BTF) and one Rotating Biological Contactor (RBC), and the
biodegradation efficiency was compared for these two reactors. The detailed biological study about the nature of
microbes which populate the reactors at various stages of the study was also studied.
Skills :
Water analysis methods,
ambient air quality monitoring techniques.
I have working experience on sophisticated analytical equipments such as : Gas Chromatograph (GC), IonChromatograph (IC), High-Performance Liquid Chromatograph (HPLC), Atomic Absorption Spectrophotometer
(AAS), Fourier-transfer Infra-Red Spectroscopy ( FTIR). Total Organic Carbon analyzer (TOC) and CHNS
analyzer.
Research interests :
Design of Biological treatment systems for example Biofilters, Bio-trickling filters etc.
industrial pollution
Wastewater treatment technologies
Air Pollution Control
Solid Waste Management and e-Waste Management
Desalination of water as a source of Drinking water
for the abatement of
Areas of interest : Environmental Engineering, Biological treatment technologies, Waste water treatment, Air
Pollution control techniques
3XEOLFDWLRQV&RQIHUHQFHV
1. Datta, A., Philip, L., 2012. Biodegradation of volatile organic compounds from
paint industries. Applied biochemistry and biotechnology, 2012;167(3):564-80.
2. Datta, A., Philip, L. Biodegradation kinetics of toluene, ethyl benzene and xylene
in a mixture of VOCs. International Conference on Environmentally Sustainable Urban Eco-system held at Indian
Institute of Technology, Guwahati in Feb 2012.
3. Datta, A., Philip, L. Inhibitory effects of Toluene on methyl iso-butyl ketone
biodegradation. International Chemical and Environmental Engineering Conference (ICEEC 2012), which will be
held on 21-23 December 2012.
About me :
I am an environmental engineer with bio-technology back-ground. Anthropogenic environmental pollution with
simultaneous industrial growth is a challenge to my generation and newer economically viable treatment
technologies are the need of the hour. I want to see myself in R&D activites in future through which I can properly
utilize the knowledge and skills I gained thus far in my career. I feel a lot is talked about and taught about in
environmental engineering while implementation part is clearly lacking. Be it safe disposal of e-waste or municipal
waste or passing on clean air, energy and drinking water resources to future generation a lot has to be done.
Environmental pollution problems being of widely diverse in nature it needs a wide variety of skill sets to solve
any particular problem. I would love to work in group projects on contemporary environmental problem,with
people from different back-ground as that gives different perspectives to see the same problem. Desalination of
sea-water and pre-treatment of water before RO inlet is a topic close to my heart as I believe Sun will be our
future energy source and Sea our future drinking water source.
I have stayed in many parts of India and have lots of friends accross the globe, I am open for job options from
any part of the world. I have done two year course on German as a foreign language from RKM Institute of
Culture, Golpark, Kolkata. I have participated ( with DAAD funding) in one winterschool and one summerschool
organized by Indo-German Center for Sustainability (IGCS), Chennai, and pretty much aware about the concept
of sustainable development.
Education :
B.Tech Biotechnology, Bengal Institute of Technology, affilated to West Bengal University of Technology.
2002-2006
M.Tech Environmental Engineering, Birla Institute of Technology, Mesra. 2006-2008.
E-mail id : avirajdatta@gmail.com
Balamurugan M
Doctor of Philosophy (PhD)
Department of Civil Engineering
Guide : Dr. B. S. Murty
Title of thesis : Management of Flows in Ephemeral Channels
Thesis abstract : This research work is to develope mathematical and management model for effective utilization
of flood waters in increasing the aquifer recharge in arid zones, based on a simulation-optimization framework.
Skills :
Numerical modeling skills
Software pakages: HEC-RAS, MAPInfo, StromNET, MODFLOW, STAAD Pro., ADT and AutoCADD
Research interests :
Computational Hydraulics (open channel flow)
Surface and Subsurface flow interaction
Flood routing and Management
Hydrologic modeling
Areas of interest : Computational Hydraulics, Surface Water and Groundwater model development, Flood
routing, Flood management
About me :
I am pursuing research in the area of computaional hydraulics and numerical modeling. Having clear knoweldge
and experince in Modeling channel geometry, Flood routing, Storm drainage network design, Dam break analysis,
Flood inundation and management.
Education :
BE - Civil Engineering, 2003-2007, KSR College of Engg. affiliated to Anna University Chennai.
ME - Hydraulics and Water Resources Engineering, 2007-2009, College of Engg. Guindy, Anna University
Chennai.
E-mail id : bala.hwre@gmail.com
K S Kasiviswanathan
Doctor of Philosophy (PhD)
Department of Civil Engineering
Guide : Dr. K. P. Sudheer
Title of thesis : Uncertainty Analysis on Neural Network Based Hydrological Models
Thesis abstract : Quantiyfying the uncertainty associated with neural network based hydrological models by
various possible uncertainty analysis techniques Developing a methodology to model hydrological processes
where available data is limited Developing a generalized procedure to carrying out uncertainty analysis on neural
network hydrological models
Skills :
Programming in Matlab
Proficiency in using water resources software packages
Proficiency in using spatial tools (Arc GIS)
Research interests :
Watershed modelling
Application of soft computing techniques in water resources
Hydrological modelling
Uncertainty analysis of modelling
Areas of interest : Surface Water Hydrology, Watershed Management, Simulation Modeling in Water Resources,
GIS in civil engineering
Publications/Conferences :
Kasiviswanathan KS, Soundhara Raja Pandian R, Saravanan S, Avinash Agarwal (2011). Genetic
programming approach on evaporation losses and its effect on climate change for Vaipar Basin.
International Journal of Computer Science Issues, Vol. 8, Issue 5(269-274)
Kasiviswanathan KS, Sudheer KP (2012) Quantification of the predictive uncertainty of artificial neural
network based river flow forecast models. Stochastic Environmental Research and Risk Assessment, DOI:
10.1007/s00477-012-0600-2.
Kasiviswanathan KS, Cibin Raj, Sudheer KP, Chaubey I (2012) Constructing prediction interval for artificial
neural network rainfall runoff models based on ensemble simulations. Journal of Hydrology (under review).
Kasiviswanathan KS, Sudheer KP (2011) Uncertainty Analysis on Neural Network based Hydrological
Models using Probabilistic Point Estimate Method. Proceedings of the International Conference on Soft
Computing for Problem Solving, Springer.130:377-384.
About me :
I am full time research scholar interested in analytical modelling, data mining and soft computing techniques. I
have a passion in solving water resources problems mathematically and efficiently coding them as computer
programs. I have involved in few real time consultancy projects. Over all I am a good listener, actively involves in
team activities and good thinker.
Education :
BE in Civil Engineering, 2003-2007, Mepco Schlenk Engineering College
M.Tech in Water Resource Development, 2007-2009, IIT Roorkee
E-mail id : vishwaiitr@gmail.com
Naresh Kumar Sharma
Doctor of Philosophy (PhD)
Department of Civil Engineering
Guide : Dr. Ligy Philip and Dr. B S Murty
Title of thesis : Development, performance evaluation and Modeling of biological systems for the treatment of
coke oven wastewater
Thesis abstract : Biological systems are more natural, effective and economic way of removing toxic chemicals
that we generate in all walks of our life. Primarily, industrial wastewaters are of much concern which directly affect
our drinking water source. Its quite important to harness and explore the microbial potential and population for
breaking specific toxic pollutants to harmless elements. Micro-orgnisms grown in different environments respond
differently to variety of pollutants. Hence, microbes are being developed in several lab-scale redox conditions like
anaerobic, anoxic and aerobic to study their degradation aspects and increase their ability for treatment of
wastewater from iron and steel industries.
Skills :
Sophasticated instrument handling (GC, HPLC, TOC, IC, CHNS etc.,)
Good software skills
Good Writing and oral skills
Research interests :
Environmental Biotechnology
Biological contaminant removal
Areas of interest : Industrial wastewater treatment, Biological treatment technologies
Publications/Conferences :
Sharma, N K., Philip, L and Murty, B S, "Aerobic Degradation of Phenolics and Aromatic hydrocarbons in
presence of cyanide", Bioresource Technology, Vol. 121, 263-273.
Sharma, N K., Philip, L and Murty, B S, "Aerobic degradation of complex organic compounds and cyanide in
presence of glucose", International conference on Environmentally Sustainable Urban Ecosystems, IIT Guwahati,
Feb 2012.
About me :
Good communication Skills
Posses Interdisciplinary knowledge
Fast learner and good co-worker
Education :
B.Tech Industrial Biotechnology, 2002-2006, Anna University
M.Tech Industrial Biotechnology, 2006-2008, Annamalai University
E-mail id : nksharma@smail.iitm.ac.in
Sivapriya S V
Doctor of Philosophy (PhD)
Department of Civil Engineering
Guide : Dr. S.R. Gandhi
Title of thesis : Experimental and Numerical Study in Behaviour of Single and Group Pile in Sloping Ground
Thesis abstract : Behavior of pile foundation in slope is a real time issue. Structures such as offshore platform,
transmission towers, high ways and various industrial units are constructed in the slope supported by pile
foundation; where the piles are subjected to load from super structure, earth pressure on retaining wall, wind load,
wave and current actions in case of offshore structures. The behaviour of pile under lateral load in sloping
ground is different from horizontal ground. The aim of this paper is to study the behaviour of single and group pile
founded in sloping ground experimentally and numerically (PLAXIS -3D). Model tests were performed in the
laboratory by using instrumented pile embedded in clay by varying the slope (1V:3H, 1V:2.5H and 1V:2H). The
experimental study also involves the various position of pile (crest, 1R and 2R; where R is the stiffness factor)
where the lateral load is applied towards the slope under two different shear strengths (30kPa and 50kPa). The
experimental and numerical results were compared.
Skills :
Auto Cad
Primavera
PLAXIS - 2D and 3D
Research interests :
Pile Foundation
Areas of interest : Pile Foundation, Ground Improvement, Site Investigation
Publications/Conferences :
1. Sivapriya, S.V., S.R.Gandhi and R.Sundravadivelu (2011) вЂњEffect of lateral movement of soil in Diaphragm
wall - A case Study.вЂќ 3rd Indian Young Geotechnical Engineers Conference, IIT Delhi, 335-340.
2. Sivapriya, S.V. and S.R.Gandhi (2011).вЂќ Behaviour of single pile in sloping ground under static lateral
loadвЂќ. Indian Geotechnical Conference, Cochin, India, 199-202.
3. Sivapriya, S.V., R.Sundravadivelu, S.R.Gandhi and K.Ramadoss (2012) вЂњStatic and dynamic slope
stability analysis after dredging in Kandla PortвЂќ. 8th International conference on coastal and port
engineering in developing countries, IIT Madras.
About me :
I am an aspiring and trying to be environmental friendly person.
Education :
B.E in Civil Engineering, 2001 - 2005, SRM Engg COllege, Aff to Anna University
M.E in SOil Mechanics and Foundation Engg, 2005-2007, College of Engg, Anna University
Ph.D in Geotechnical Division, 2008 - 2013, IIT -M
E-mail id : sivapriyavijay@gmail.com
Kabilan Pari
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Dr. Ravindra Gettu
Title of thesis : Creep and Shrinkage of high performance concrete.
Thesis abstract : Concrete is the most widely used material in the world. Lot of research work is being carried out
in concrete and new innovative products such as high performance concrete are designed and produced. Factors
affecting the strength and durability of concrete is the mechanical stability. Creep and shrinakge are the two main
parameters affecting the mechanical stability of concrete. Factors affecting the creep and shrinkage of concrete
are binder content, water to binder ratio, mineral admixtures, relative humidity, temperature, age of loading and
aggregates volume . Creep and shrinakge of high performance concrete will be studied for a minimum period of
six months.
Skills :
1) Microsoft office.
2) Sima Pro
3) Microsoft office project.
4) Quality systems
5) Concrete performance modelling.
Research interests :
Creep and Shrinkage
Quality systems
Product development
Materials science
Areas of interest : CONCRETE TECHNOLOGY, CONSTRUCTION PLANNING AND CONTROL, RISK
MANAGEMENT, SUSTAINABLE CONSTRUCTION, CONSTRUCTION METHODS AND EQUIPMENT,
MATERIALS, CEMENT, BITUMEN.
Publications/Conferences :
About me :
I am a determined person who tries to put what I preach into practice. I believe in smart work and integrity. I am
globe-trotter and like to get accost with people and their culture.
Education :
1) B.E Civil Engineering, 2004-2008, MSEC, Anna university
E-mail id : kabilan_pari@yahoo.com
Nibedita Sahoo
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Sathish Kumar S R
Title of thesis : Performance Based Seismic Design of Industrial Steel Structures
Thesis abstract : Study of seismic performance of single-storey portal frames and improve the performance of
frames under seismic loading
Skills :
STAAD Pro
SAP 2000
ABAQUS
MATLAB
Research interests :
Design of Steel Structures
Earthquake Resistant Structural Design
Areas of interest : Tall Structures, Pre Engineered Buildings, Seismic Design
About me :
I did my B.Tech in civil engineering from NIT,Rourekla.I joined MECON limited ( a Govt. of India Enterprieses) as
a structural design engineer and worked there for 3 years.I have designed various junction houses, conveyor
galleries and its supporting structures,pump houses and plate mills for JSW,Toranagallu and JSPL,Anagul.In IIT
Madras,I am working on improving the performance of steel structures under seismic loading.
Education :
B.Tech,Civil Engineering,2004-2008,National Institute of Technology,Rourkela
E-mail id : nibedita.nitr@gmail.com
P.pandi
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Dr.U.Saravanan and Dr. Rupen Goswami
Title of thesis : Determining current state of a bridge using quasi static loading and strain measurement
Thesis abstract : One is interested in determining the current state of a bridge for a variety of reasons like to
ascertain whether the axle load and/or the speed of the vehicle can be increased over the bridge. Thus
determining the current state of the bridge involves not only determining whether the bridge is damaged but also
to find material stiffness degradations as well as the condition of the support. A methodology for finding the
material stiffness and the possibility of bearing seizure from strain measurements at preferred predetermined
locations under slow moving normal vehicle loads in simply supported bridge decks after just one analysis is
proposed. Strain gauges are to be pasted on the bridge at locations where the longitudinal bending stresses are
alone present. Using the fact that, in a statically determinate, homogeneous bridge the bending stresses are
independent of the material model, the linear elastic material parameters, namely YoungвЂ™s modulus and shear
modulus are determined after just one analysis. The bearing seizure is found by looking for reversal of curvature
at a section close to the support as the vehicle moves over the bridge. The current state of a prestressed ultra
high performance concrete(UHPC) bridge instrumented and tested before the above methodology was available
is determined using the proposed algorithm. The efficacy of the algorithm to detect damage is also studied.
Skills :
FEM packages : ABAQUS , ANSYS
Civil packages: STAADPRO, SAP 2000,
Programming languages : FORTRAN, PYTHON, MATLAB
Utility packages: AUTOCAD, MS Office
Research interests :
Computational Mechanics
Structural Health Monitoring (SHM)
Finite Element analysis
Optimization methods
Nonlinear solid mechanics
Areas of interest : Computational Mechanics, Structural Health Monitoring, finite element analysis, Damage
analysis
Publications/Conferences :
Pandi. P. Saravanan. U. and Goswami. R, (2012), вЂњAn algorithm to determine the current state of a
statically determinate bridge from strain measurementsвЂќ, 7th International Conference on Asia Pacific
Network of Centers for Research in Smart Structure Technology (ANCRiSST 2012) 27-28 July
(2012), Indian Institute of Science Bangalore India.
Pandi. P., Saravanan. U. Goswami. R. and Wipf. T. вЂњDetermining the current state of a statically
determinate bridge based on strain measurementsвЂќ American Society of Civil Engineers (ASCE) Journal
of Structural Engineering (to be submitted for publication).
Education :
D.C.E, Diploma in Civil Engineering, 2002-2005, Alagappa Polytechnic College Karaikudi
B.E Civil Engineering, 2005 -2009, The Institution of Engineers India, Kolkata
M.S Structural Engineering, 2009 -2012, IIT Madras
E-mail id : pandiieindia@gmail.com
Payal K. Firodiya
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Dr. Amlan K. Sengupta, Prof. Devdas Menon
Title of thesis : Probabilistic assessment of strength deterioration of reinforced concrete bridge deck due to
corrosion of rebar
Thesis abstract : Reinforced concrete (RC) bridges constructed in the coastal areas and marine environment
deteriorate with time due to the ingress of moisture with chloride ions. The cross-sectional areas of the steel bars
reduce due to corrosion, which leads to reduction in the flexural capacity of the deck of a bridge. The present
study describes a probabilistic approach for assessing the deterioration in the capacity for a typical girder-andslab road bridge deck, considering chloride induced corrosion of plain mild steel (MS) and cold twisted deformed
(CTD) bars that were traditionally used in bridges. The rate of corrosion of the bars is one of the important
parameters to predict the service-life of a corroding structure. It is necessary to determine the rates of corrosion of
such rebars, which can be substantially different from those of the bars presently used. An experimental program
was undertaken to determine the rates of corrosion of MS and CTD rebars, under standard laboratory
environmental conditions. The Linear Polarization Resistance (LPR) technique with a 3-electrode corrosion cell
setup was used to measure the corrosion rates. Next, the modelling of chloride induced corrosion of bars for
estimating the flexural capacity of a girder of the bridge deck was done. Finally, the time-variant flexural capacity
of the girder using Monte Carlo simulations is described.
Skills :
Technical skills: SAP, MATLAB, Staad Pro
Research interests :
Studying the behaviour of reinforced concrete members
Assessment of bridge decks for deterioration due to corrosion
Areas of interest : Designing of reinforced concrete structures, Structural Health Monitoring
About me :
I have a good qualitative aptitude along with good grasping power and eagerness to learn
Linguistic ability : Excellent command over English, Marathi and Hindi
Good experience of organizing events ans working in groups
Education :
B.Tech Civil Engineering, 2006-2010, College of Engineeing Pune (COEP)
E-mail id : payalfirodiya@gmail.com
Sanish K B
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Dr. Manu Santhanam
Title of thesis : Ultrasonic and electrical methods for evaluation of early age behavior of cement paste and
concrete
Thesis abstract : Analysing early as well as later age properties of cementitiuos materials using non-destructive
testing (NDT) methods Monitoring material papameters such as porosity, and hydration process using electrical
conductivity methods Prediction of porosity and setting time of cementitious materials using conductivity data
Monitoring and predicting compressive strength development of concrete using ultrasonic methods Analysis of
rheology of cement paste using conductivty data
Skills :
В·
В·
В·
Good team player
Good communication skills
Good in analytical problem solving
В·
В·
Programming - C, C++
Software вЂ“ Autocad, Revit, primavera, ZPlot, rheocalc, Origin, Sigmaplot
Research interests :
Non-destructive testing methods on concrete
Concrete technology
Areas of interest : NDT application in Civil engineering
Publications/Conferences :
Sanish, K.B., and Santhanam, M., вЂќUltrasonic and electrical impedance based methods for property
estimation and condition evaluation of cement paste and concreteвЂќ, Poster presented for Asian
Conference on Ecstasy in Concrete, Chennai, 5th-9th December, 2010
Sanish, K.B., and Santhanam, M., вЂќCharacterization of strength development of concrete using ultrasonic
methodвЂќ, Paper accepted for 18th World Conference on Non-Destructive Testing, South Africa, 16th-20th
April, 2012
About me :
My aim is to work in a professional atmosphere that enables me to utilize my knowledge and
abilities to contribute towards the growth of the company, along with getting exposed to emerging
trends and technologies, ensuring overall personal and intellectual development.
Education :
B. Tech, Civil Engineering, 2003-2007, Kerala University
E-mail id : skbpalai@gmail.com
Shaik Shabber Hussain
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Dr. P. Alagusundaramoorthy
Title of thesis : Ultimate Strength of Isogrid Stiffened Composite Cylindrical Shells
Thesis abstract : Structural efficiency is a primary concern in aerospace and aircraft industries. The development
of light weight and highly efficient structural components is desirable for space and launch vehicles. Due to high
strength to weight ratio and high stiffness to weight ratio CFRP stiffened shell structures have been used to fulfill
these applications. Shells are stiffened along longitudinal, circumferential or in both directions on inner or outer
surfaces. The concept that is found most promising is isogrid pattern of stiffening the shells and the grid members
are arranged in an equilateral triangle pattern. Hence isogrid stiffened CFRP composite cylindrical shell structures
are used in launch vehicle payload rings, interstage rings, engine ducting, and space station modules and are
subjected to axial loads and it is important to study the buckling and post buckling behavior for practical
applications.
Skills :
Finite Element Soft ware: ANSYS
MATLAB
Research interests :
Composite Structures
Finite Element Analysis
Areas of interest : Finite Element Analysis of Structural Components, Manufacturing of Composite Structural
Components
Publications/Conferences :
Shaik Shabber Hussain and Alagusundaramoorthy P. (2011) вЂњBuckling strength of isogrid stiffened CFRP
composite cylindrical shellsвЂќ The first national conference on Advances in Composites and Solid
Mechanics, held at Sardar Vallabhai Patel Institute of Technology, Vasad, Gujarat.
About me :
I am a positive thinker and self motivative. The quote I generally believe in is " Hope for the best and prepare for
the worst"
Education :
B.E., Aeronautical Engineering, 2005 - 2010, Aeronautical Society of India.
M.S., Structural Engineering, 2010 - 2013, IIT Madras.
E-mail id : shabber.aerodyne3456@gmail.com
V S Sowmiyaa
Master of Science by Research (MS)
Department of Civil Engineering
Guide : Vidya Bhusan Maji & Robinson R G
Title of thesis : Equivalent Material Approach to Reinforced Soil
Thesis abstract : Reinforcement soil is a composite material consisting of soil and reinforcing elements To
analyse them as a composite material and to study their interaction behaviour is quite complex This equivalent
approach, considers the composite reinforced soil as an equivalent material Simple laboratory tests on reinforced
soil is carried out to determine equivalent properties Using those equivalent properties, reinforced soil is analysed
numerically using a Finite Difference based numerical software and compared with that of experimental results.
This approach is then tried to analyse a small scale bearing problem using CBR mould
Skills :
Good Communication Skills
Positive Attitude
Flexible with working environment
Research interests :
Soil Reinforcement and Geosynthetics
Ground Improvement Techniques
Areas of interest : Reinforced soil structures, Ground Improvement Techniques, Deep Foundation Techniques
About me :
Born and brought up in Salem, Tamilnadu, which is well known for Mangoes
Completed my graduation in B.E. Civil Engineering from sona college of technology salem
My hobbies are listening to music, reading novels
My Strengths are positive attitude, compatibility with the people and environment i work with
Short Term Goal- To start my career in a well reputed organisation
Long Term Goal- To reach a respectable position, with sound Technical knowledge and experience.
Education :
B.E Civil Engineering, 2005-2009, Sona College of Technology, Salem
E-mail id : sowmicivil@gmail.com
Department of Computer Science and
Engineering
John Jose
Doctor of Philosophy (PhD)
Department of Computer Science and Engineering
Guide : Dr. Madhu Mutyam
Title of thesis : Energy Efficient High Performing Adaptive NoC routers for Multi-core Architectures.
Thesis abstract : The effectiveness of multicore architecture depends on theunderlying NoC framework which
is the communication backborn of the system. My thesis contains a collection ofrouter architecture and algorithms
that improve the average packet latency of the network and reduces power andarea consumption of routers.
Skills :
Good team player
Fast learner
Dedication and sincererity to work
Research interests :
Congestion aware Network on Chip (NoC) router designs in multicore processors.
Energy efficient bufferless NoC router design in multicore procesoors.
Areas of interest : Computer Architecture
Publications/Conferences :
1. John Jose, Bhawna Nayak, D. Kranthikumar, Madhu Mutyam, DeBAR : Deflection Based Adaptive
Router with Minimal Buffering, to appear in proceedings of 16th IEEE / ACM International Conference
on Design , Automation and Test in Euope (DATE-'13), Grenoble, France, March 18-22, 2013.
2. John Jose, K.V. Mahathi, J.Shiva Shankar, Madhu Mutyam,TRACKER: A Low Overhead Adaptive
NoC Router with Load Balancing Selection Strategy, in proceedings of the IEEE/ACM- 30th International
Conference on Computer Aided Design (ICCAD'12), SanJose, California, USA, November 5 to 8, 2012.
3. John Jose, J.Shiva Shankar, K.V. Mahathi, D. Kranthikumar, Madhu Mutyam, BOFAR: Buffer
Occupancy Factor based Adaptive Router for Mesh NoCs, in proceedings of the ACM 4th International
Workshop on Network on Chip Architectures (NoCArc-'11) held in conjunction with the 44th Annual
IEEE/ACM International Symposium on Microarchitecture, Porto Alegre, Brazil , December 3 to 7, 2011,
pp-23-28.
About me :
I am a doctoral scholar from IIT Madras. I am in the last stage of the doctoral research and I hope to complete my
thesis by end of 2013. After that I am looking for faculty positions in reputed insitutes or as research fellow
positions in reputed R&D firms. I am hailing from a small village from central Kerala.
Education :
Ph.D (CSE) - Indian Institute of Technology Madras, Chennai, Tamil Nadu. (2009- )
M.Tech (CSE) - Vellore Institute of Technology, (VIT University), Tamil Nadu. (2004-2006)
B.Tech (CSE) - College of Engineerign Adoor, (Cochin University), Kerala. (1999-2003)
E-mail id : johnjose004@gmail.com
S Sharmila Deva Selvi
Doctor of Philosophy (PhD)
Department of Computer Science and Engineering
Guide : PROF. C. PANDU RANGAN
Title of thesis : DESIGN AND ANALYSIS OF PROVABLY SECURE PUBLIC KEY CRYPTOSYSTEMS
Thesis abstract : The basic problem of cryptography can be considered to be the issue of secure communication
between two parties using a communication medium which is not under the exclusive control of these two parties.
Such a medium is called a public channel, highlighting the fact that the information flowing across this channel is
publicly accessible. An alternate view of cryptography is the task of building an implicit secure communication
channel over an explicitly given insecure public channel. In spite of the importance of the problem, the security of
a cyptographic protocol / primitive was established in an ad-hoc or unscientific fashion in the earlier days of
cryptography. In fact, even as late as early 70's, we did not have a formal way to specify on security requirements
and no specific attack model was available either. Over the years, "Provable Security" has become an important
research area in modern cryptography. We have provided new / improvement / efficient / cryptanalysis of
cryptographic primitives - encryption, signature, signcryption and their variants in the public key setting. We have
given affirmative answers to several significant open problems, provides first solutions to newly formulated
primitives and refines existing security models of few public key primitives.
Skills :
Coding with OPENSSL
Expert in coding with GMP and PBC library
C, C++
Designing, formally proving and implementing cryptographic protocols.
Research interests :
PROVABLE SECURITY: PUBLIC KEY CRYPTOGRAPHY
SIGNATURES AND ITS VARIANTS
ENCRYPTION
SIGNCRYPTION
PROXY CRYPTOGRAPHY
PROXY RE-CRYPOGRAPHY
KEY ENCAPSULATION MECHANISM
CLOUD SECURITY
International Conferences and Workshops
[SS01] S. Sharmila Deva Selvi, S. Sree Vivek, Deepanshu Shukla, C. Pandu Rangan: вЂњEfficient and
Provably Secure Certificateless Signcryption Scheme for Multiple ReceiversвЂќ, Springer LNCS conference
proceedings (ProvSec 2008), China.
[SS02] S. Sharmila Deva Selvi, S. Sree Vivek, G. Ragavendran, K. Naga Naresh, C. Pandu Rangan:
вЂњCryptanalysis of Mu and LiвЂ™s Broadcast Signcryption Scheme and a provably secure Broadcast
Signcryption SchemeвЂќ, Springer LNCS conference proceedings (WISA 2008), Korea.
[SS03] S. Sharmila Deva Selvi, S. Sree Vivek, Neha Jain, C. Pandu Rangan: вЂњCryptanalysis of Li et al.вЂ™s
Threshold Signcryption SchemeвЂќ, IEEE conference Trust Security and Privacy for Pervasive Applications
08 proceedings (TSP 2008), China.
[SS04] S. Sharmila Deva Selvi, S. Sree Vivek, Naga Naresh K, Ragavendran G, C. Pandu Rangan:
вЂњCryptanalysis of Bohio et al.вЂ™s Broadcast Signcryption Scheme for Wireless Ad-hoc NetworksвЂќ, IEEE
workshop вЂњPrivacy Security and Trust вЂ™08вЂќ proceedings (PST 2008), Canada.
[SS05] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњOn the security of Identity Based Ring
Signcryption SchemesвЂќ, Springer LNCS conference proceedings, (ISC 2009), Italy.
[SS06] S. Sree Vivek, Sharmila Deva Selvi, Gopinath Sikha, C. Pandu Rangan: вЂњBreaking and
Developing of Group Inside SignaturesвЂќ, Springer LNICST conference proceedings, (SECURECOMM
2009), Greece.
[SS07] S. Sree Vivek, S. Sharmila Deva Selvi, C. Pandu Rangan: вЂњOn the security of TWO Ring
Signcryption SchemesвЂќ, INSTICC Conference proceedings, (SECRYPT 2009), Italy.
[SS08] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњBreaking and Fixing of an Identity
Based Multi-Signcryption SchemeвЂќ, Springer LNCS conference proceedings, (PROVSEC 2009), China.
[SS09] S. Sharmila Deva Selvi, S. Sree Vivek, Rahul Srinivasan, C. Pandu Rangan: вЂњAn Efficient IdentityBased Signcryption Scheme for Multiple ReceiversвЂќ, Springer LNCS conference proceedings (IWSEC
2009), Japan.
[SS10] S. Sharmila Deva Selvi, S. Sree Vivek, K. Shriram, S. Kalaivani, C. Pandu Rangan: вЂњIdentity
Based Aggregate Signcryption SchemesвЂќ, Springer LNCS conference proceedings, (INDOCRYPT 2009),
India.
[SS11] S. Sharmila Deva Selvi, S. Sree Vivek, G. Ragavendran, K. Naga Naresh, C. Pandu Rangan:
вЂњOn the Provable Security of Multi-Receiver Signcryption SchemesвЂќ, (ICISC 2009), Korea.
[SS12] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњCryptanalysis of Certificateless
Signcryption Schemes and An Efficient Construction Without PairingвЂќ, Springer LNCS Conference
proceedings (INSCRYPT 09), China.
[SS13] S. Sharmila Deva Selvi, S. Sree Vivek, Shilpi Nayak, C. Pandu Rangan: вЂњBreaking and Building of
Threshold Signcryption SchemesвЂќ, Springer LNCS Conference proceedings, (INSCRYPT 09), China.
[SS14] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњCertificateless KEM and Hybrid
Signcryption Schemes RevisitedвЂќ. Springer LNCS Conference proceedings, (ISPEC 2010), Australia.
[SS15] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Ring Signcryption with
Public VerifiabilityвЂќ. Springer LNCS Conference proceedings, (SECRYPT 2010), Greece.
[SS16] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Public Verifiable
Signcryption SchemeвЂќ. Springer LNCS Conference proceedings, (PROVSEC 2010), Malaysia.
[SS17] S. Sharmila Deva Selvi, S. Sree Vivek, Gopinath S, C. Pandu Rangan: вЂњIdentity Based SelfDelegated Signature вЂ“ Self Proxy SignaturesвЂќ. IEEE Conference proceedings (APWCS 2010), Australia.
[SS18] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњOn The Security of Identity Based
Threshold Unsigncryption SchemesвЂќ. IEEE Conference proceedings (APWCS 2010), Australia.
[SS19] S. Sree Vivek, S. Sharmila Deva Selvi, Radha Krishnan, C. Pandu Rangan: вЂњConditional Proxy
Re-Encryption Scheme-A More Efficient ConstructionвЂќ, IEEE Conference proceedings (ICCSEA 2011),
Dubai.
[SS20] S. Sree Vivek, S. Sharmila Deva Selvi , C. Pandu Rangan, вЂњCCA Secure Certificateless
Schemes Based on RSA вЂќ, Springer LNCS conference proceedings (SECRYPT 2011), Spain.
[SS21] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan, вЂњDeterministic Identity Based Signature
With Tight Reduction вЂќ, Springer LNCS conference proceedings (IWSEC 2011), Japan.
[SS22] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan, вЂњOnline/Offline Encryption and
Signcryption SchemesвЂќ, Springer LNCS conference proceedings (InfoSecHiComNet 2011), India.
[SS23] S. Sree Vivek, S. Sharmila Deva Selvi , Sobin. C, C. Pandu Rangan, вЂњSpecial Purpose Proxy ReSignature вЂќ, IEEE conference proceedings (Innovations and Information Technology 2012- Innovations
2012), Dubai.
[SS24] S. Sharmila Deva Selvi, S. Sree Vivek, Dhinakaran Vinayagamurthy, C. Pandu Rangan, вЂњID
Based Signcryption Scheme in Standard ModelвЂќ, Springer LNCS conference proceedings (ProvSec
2012), China.
[SS25] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan,, вЂњDeterministic Identity Based
Signature Scheme and Its Application for Aggregate SignaturesвЂќ, Springer LNCS conference proceedings
(ACISP 2012), Australia.
[SS26] S. Sree Vivek, S. Sharmila Deva Selvi, C. Pandu Rangan вЂњIdentity Based Partial Aggregate
Signature Scheme Without PairingвЂќ, 35th IEEE Sarnoff Symposium вЂ“ 2012, United States of America.
[SS27] S. Sree Vivek, S. Sharmila Deva Selvi, C. Pandu Rangan,, вЂњCompact Stateful Encryption
Schemes With Ciphertext VerifiabilityвЂќ, To appear in Springer LNCS conference proceedings (IWSEC
2012), Japan.
[SS28] S. Sree Vivek, S. Sharmila Deva Selvi, Ramarathnam Venkatesan and C. Pandu Rangan, вЂњA
Special Purpose Signature Scheme for Secure Computation of Traffic in a Distributed NetworkвЂќ, Accepted
in 4th International Workshop on Managing Insider Security Threats (MIST-2012), Japan.
[SS29] S. Sharmila Deva Selvi, S. Sree Vivek, Vivek Krishna Pradhan and C. Pandu Rangan, вЂќEfficient
Certificateless Online/Offline Signature for the CloudвЂќ, Accepted in 4th International Workshop on
Managing Insider Security Threats (MIST-2012).
[SS30] S. Sharmila Deva Selvi, S. Sree Vivek, Salini Selvaraj Kowsalya and C. Pandu Rangan: PKI
Based Signcryption Without Pairing, вЂњAn Efficient Scheme With Tight Security ReductionвЂќ, Accepted in 4th
International Workshop on Managing Insider Security Threats (MIST - 2012).
Refereed International Journals
[SS31] S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњRing Signcryption Schemes
RevisitedвЂќ, Journal of Math For Industry, Japan.
[SS32] S. Sree Vivek, S. Sharmila Deva Selvi, Radha Krishnan, C. Pandu Rangan: вЂњConditional Proxy
Re-Encryption Scheme-A More Efficient ConstructionвЂќ, International journal of Network Security & Its
Applications(IJNSA)
.
About me :
I am a friendly and jovial person with the following traits,
Eager to learn new concepts.
Never give up attitude in finishing a task.
Self-Organized.
Adaptable to new and extreme environments.
Enjoy doing research and writing research papers.
Education :
Ph.D. Scholar - Computer Science and Engineering(2006-Till now)
Indian Institute of Technology Madras, Chennai, India
Advisor: Prof. C. Pandu Rangan
M.E.(Gold Medalist) - Computer Science and Engineering(2004-2006)
Anna University, Chennai, India
Advisor: Dr. N. Chandrasekhar
B.E. - Computer Science and Engineering(1998-2002)
Manonmaniam Sundaranar University, Tirunelveli, India
Advisors: Asst. Prof. Pushpha Ranjini, Sr. Lecturer. Muthuselvi
E-mail id : CS06D008@smail.iitm.ac.in
Sree Vivek S
Doctor of Philosophy (PhD)
Department of Computer Science and Engineering
Guide : Prof C. Pandu Rangan
Title of thesis : STUDIES ON SOME ENCRYPTION, SIGNATURE AND SIGNCRYPTION SCHEMES
Thesis abstract : Public Key Cryptography can be studied in various settings: PKI based, Identity Based and
Certificateless to name a few. This thesis is a consolidation of research work done with respect to several
cryptographic primitives with respect to one or more of the above settings. The research work reported in this
thesis is on provably secure public key cryptosystems and their variants. The nature of work done may be
designing new cryptographic primitives according to the sheer need for practical security and considering new
types of attack models, modeling them mathematically and providing counter measures for improving the security
of systems to with stand the new type of attacks, cryptanalysis of existing primitives, fixing the existing scheme,
efficiency improvement and proposing new security models. More specifically the work done in this thesis are as
follows: вЂў We have initiated a research to counter the attacks due to malwares such as RAM scrapers and
extended the existing security model to capture the effect of RAM scrapers precisely. We refer this extension as
adaptive chosen ciphertext attack with glass box decryption. After formally introducing the new kind of
attack/threat, we show the vulnerability of few existing schemes in the newly proposed model and propose new
secure schemes. вЂў We have formally argued that the security claim made for one of the stateful identity based
encryption schemes is impossible to achieve. We have provided a new security proof for the scheme, assuming
the hardness of the Gap Bilinear Diffie Hellman (GBDH) problem. вЂў We have proposed two new stateful public
key encryption schemes with ciphertext verifiability. Our schemes offer more compact ciphertext when compared
to all existing stateful public key encryption schemes with ciphertext verifiability. вЂў A conditional proxy reencryption (C-PRE) scheme is one in which the proxy can transform the ciphertext generated with the delegatorвЂ™s
public key, associated with a condition set by the delegator into ciphertext under delegateeвЂ™s public key, (so that
the delegatee can decrypt it) only if the proxy has the re-encryption key for that condition. There are few C-PRE
schemes in the literature. We have proposed a more efficient C-PRE scheme which uses substantially less
number of bilinear pairings when compared to the existing ones and proved the security of the scheme in the
random oracle model. вЂў We have proposed two novel RSA based adaptive chosen ciphertext secure (CCA2)
certificateless encryption schemes. The new schemes are efficient when compared to other existing certificateless
encryption schemes that are based on the costly bilinear pairing operation and are quite comparable with the
certificateless encryption scheme based on multiplicative groups (without bilinear pairing) and the only existing
RSA based CPA secure certificateless encryption scheme. We consider a slightly stronger security model than
the ones considered in the literature to prove the security of our schemes. вЂў A Self Proxy Signature (SPS) is a
type of proxy signature wherein, the original signer delegates the signing rights to himself (Self Delegation), there
by generating temporary public and private key pairs for himself. Using a SPS the signer can prevent the
exposure of his permanent private key from repeated use in an insecure environment. We have proposed the first
identity based self proxy signature scheme. We have given a generic scheme and a concrete instance in the
identity based setting. We have defined the appropriate security model for the same and proved both the generic
and concrete schemes in the defined security model. вЂў Group Inside Signature (GIS) is a signature scheme that
allows the signer to designate his signature to be verified by a group of people, so that members other than the
designated group cannot verify the signature. In Broadcast Group Oriented Signature (BGOS), a user from one
group can designate his signature to be verified by members of another group. An Adaptable Designated Group
Signature (ADGS), is one in which a user can designate his signature to be verified by a selected set of members
who are from different groups. We have cryptanalyzed few schemes on all the above mentioned areas and have
proposed a new identity based ADGS scheme and proved its security in the random oracle model. вЂў Confidential
communication with sender authentication is efficiently achieved by using a single cryptographic primitive called
signcryption. In Threshold Signcryption scheme, only if вЂњtвЂќ out of вЂњnвЂќ users in the sender group (where t < n)
combine together, signcryption can be performed. When this constraint is posed on the receiving end (i.e вЂњtвЂќ out
of вЂњnвЂќ users in the receiving group combine together), the scheme is called as Threshold Unsigncryption. We
have analyzed the security of all existing threshold signcryption schemes, identity based threshold signcryption
schemes and identity based threshold unsigncryption schemes. We have proposed new threshold signcryption
schemes both in PKI and identity based setting and an identity based threshold unsigncryption scheme, and
prove the security of the schemes in the random oracle model. вЂў It is often required that multiple senders have to
signcrypt a single message to a certain receiver. Obviously, it is inefficient to signcrypt the messages sepa rately.
The concept of multi-signcryption is similar to that of multi-signatures with the added property - confidentiality. We
show the weakness of the only existing multi-signcryption scheme and provide a fix for the scheme and formally
prove the security of the fixed scheme.
Skills :
Research Activities:
Acted as Referee for the Following International Journals:
вЂ“ Springer - Designs, Codes and Cryptography (DESI).
вЂ“ Defense Science Journal (DSJ).
вЂ“ Elsevier - Information Processing Letters (IPL).
вЂ“ Elsevier - Journal of Systems and Software (JSS).
вЂ“ Elsevier - Theoretical Computer Science (TCS).
вЂ“ Elsevier - Information Sciences (INS).
вЂ“ IET Information Security Journal.
вЂ“ KSII Transactions on Internet and Information Systems.
Acted as External Reviewer for the Following Conferences:
вЂ“ International Conference on Cryptology and Network Security (CANS - 2008)
вЂ“ International Conference on Cryptology in India (Indocrypt - 2009)
вЂ“ IEEE Global Communications Conference (IEEE Globecom - 2009)
вЂ“ National Conference on Communications (NCC - 2010)
вЂ“ International Conference on Distributed Computing and Networking (ICDCN - 2010)
вЂ“ International Conference on Provable Security (ProvSec-2010, 2011)
вЂ“ IEEE International Symposium on Advanced Networks and Telecommunication Systems (IEEE ANTS - 2011)
вЂ“ IEEE Global Communications Conference (IEEE Globecom - 2012)
Research interests :
Cryptography
Provable Securty
Public Key Cryptography
RFID Security
Practical Security.
Areas of interest : Cryptography, Public Key Cryptography, Cryptanalysis, Provable Security, Algorithms & Data
Structures, Grapg Theory.
Publications/Conferences :
CONFERENCE PUBLICATIONS:
International:
2008:
1.
S. Sharmila Deva Selvi, S. Sree Vivek, Deepanshu Shukla, C. Pandu Rangan: вЂњEfficient and Provably
Secure Certificateless Signcryption Scheme for Multiple ReceiversвЂќ, Springer LNCS Proceedings of the
Conference, (ProvSec 2008), China.
2. S. Sharmila Deva Selvi, S. Sree Vivek, G. Ragavendran, K. Naga Naresh, C. Pandu Rangan: вЂњCryptanalysis
of Mu and LiвЂ™s Broadcast Signcryption Scheme and a provably secure Broadcast Signcryption SchemeвЂќ,
Springer LNCS Proceedings of the Conference, (WISA 2008), Korea
3. S. Sharmila Deva Selvi, S. Sree Vivek, Neha Jain, C. Pandu Rangan: вЂњCryptanalysis of Li et al.вЂ™s Threshold
Signcryption SchemeвЂќ, IEEE conference Trust Security and Privacy for Pervasive Applications 08 (TSP 2008),
China
4. S. Sharmila Deva Selvi, S. Sree Vivek, Naga Naresh K, Ragavendran G, C. Pandu Rangan: вЂњCryptanalysis
of Bohio et al.вЂ™s Broadcast Signcryption Scheme for Wireless Ad-hoc NetworksвЂќ, IEEE workshop вЂњPrivacy
Security and Trust вЂ™08 (PST 2008)вЂќ, Canada.
2009:
5.
S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњOn the security of Identity Based Ring
Signcryption SchemesвЂќ, Springer LNCS Proceedings of the Conference, (ISC 2009), Italy.
6. S. Sree Vivek, Sharmila Deva Selvi, Gopinath Sikha, C. Pandu Rangan: вЂњBreaking and Developing of Group
Inside SignaturesвЂќ, Springer LNICST Proceedings of the Conference, (SECURECOMM 2009), Greece.
7.
S. Sree Vivek, S. Sharmila Deva Selvi, C. Pandu Rangan: вЂњOn the security of TWO Ring Signcryption
SchemesвЂќ, A part of ICETE - The International Joint Conference on e-Business and Telecommunications.
INSTICC Press 2009, (SECRYPT 2009), Italy.
8. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњBreaking and Fixing of an Identity Based MultiSigncryption SchemeвЂќ, Springer LNCS Proceedings of the Conference, (PROVSEC 2009), China.
9.
S. Sharmila Deva Selvi, S. Sree Vivek, Rahul Srinivasan, C. Pandu Rangan: вЂњAn Efficient Identity-Based
Signcryption Scheme for Multiple ReceiversвЂќ, Springer LNCS Proceedings of the Conference (IWSEC 2009),
Japan.
10.
S. Sharmila Deva Selvi, S. Sree Vivek, K. Shriram, S. Kalaivani, C. Pandu Rangan: вЂњIdentity Based
Aggregate Signcryption SchemesвЂќ, Springer LNCS Proceedings of the Conference, (INDOCRYPT 2009), India.
11.
S. Sharmila Deva Selvi, S. Sree Vivek, G. Ragavendran, K. Naga Naresh, C. Pandu Rangan: вЂњOn the
Provable Security of Multi-Receiver Signcryption SchemesвЂќ, Springer LNCS Proceedings of the Conference,
(ICISC 2009), Korea.
12. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan : вЂњCryptanalysis of Certificateless Signcryption
Schemes and An Efficient Construction Without PairingвЂќ, Springer LNCS Proceedings of the Conference
(INSCRYPT 09).
13.
S. Sharmila Deva Selvi, S. Sree Vivek, Shilpi Nayak, C. Pandu Rangan : вЂњBreaking and Building of
Threshold Signcryption SchemesвЂќ, Springer LNCS Proceedings of the Conference (INSCRYPT 09).
2010:
14.
S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњCertificateless KEM and Hybrid Signcryption
Schemes RevisitedвЂќ. Springer LNCS Proceedings of the Conference (ISPEC 2010).
15.
S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Ring Signcryption with Public
VerifiabilityвЂќ. A part of ICETE - The International Joint Conference on e-Business and Telecommunications.
SciTePress 2010 (SECRYPT 2010).
16.
S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Public Verifiable Signcryption
SchemeвЂќ. Springer LNCS Proceedings of the Conference (PROVSEC 2010).
17.
S. Sharmila Deva Selvi, S. Sree Vivek, Gopinath S, C. Pandu Rangan: вЂњIdentity Based Self-Delegated
Signature вЂ“ Self Proxy SignaturesвЂќ. IEEE Conference (NSS-APWCS 2010).
18. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњOn The Security of Identity Based Threshold
Unsigncryption SchemesвЂќ. IEEE Conference (NSS-APWCS 2010).
2011:
19.
S. Sree Vivek, S. Sharmila Deva Selvi, V. Radha Kishan, C. Pandu Rangan: вЂњConditional Proxy ReEncryption - A more Efficient ConstructionвЂќ. Springer LNCS вЂ“ CCIS Proceedings of the Conference (CNSA 2011).
20. S. Sree Vivek, S. Sharmila Deva Selvi, V. Radha Kishan, C. Pandu Rangan: CCA Secure Certificateless
Encryption Schemes Based on RSA. A part of ICETE - The International Joint Conference on e-Business and
Telecommunications. SciTePress 2011 (SECRYPT-2011).
21. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Online/ Offline Encryption and
Signcryption Schemes RevisitedвЂќ. Springer LNCS Proceedings of the Conference (InfoSecHiComNet 2011)
22. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity-Based Deterministic Signature Scheme
without Forking-LemmaвЂќ. Springer LNCS Proceedings of the Conference (IWSEC 2011). вЂњBest Student Paper
AwardвЂќ
2012:
23. S. Sree Vivek, S. Sharmila Deva Selvi, C. Sobin, C. Pandu Rangan: A Special Purpose Proxy Re-Signature
Scheme. IEEE Proceedings of Innovations 2012 (IIT 2012).
24.
S. Sree Vivek, S. Sharmila Deva Selvi, J.Shriram, C. Pandu Rangan: Identity Based Partial Aggregate
Signature Scheme Without Pairing, 35th IEEE Sarnoff Symposium - 2012.
25. S. Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: Deterministic Identity Based Signature Scheme
and its Application for Aggregate Signatures, Accepted in LNCS Proceeding (ACISP вЂ“ 2012).
26. S. Sharmila Deva Selvi, S. Sree Vivek, Dhinakaran.V, C. Pandu Rangan: ID Based Signcryption Scheme in
Standard Model, Accepted in LNCS Proceeding (PROVSEC вЂ“ 2012).
27.
S. Sree Vivek, S. Sharmila Deva Selvi, C. Pandu Rangan: Compact Stateful Encryption Schemes With
Ciphertext Verifiability, Accepted in LNCS Proceeding (IWSEC вЂ“ 2012).
28.
S. Sree Vivek, S. Sharmila Deva Selvi, Ramarathnam Venkatesan and C. Pandu Rangan: A Special
Purpose Signature Scheme for Secure Computation of Traffic in a Distributed Network, Accepted in 4th
International Workshop on Managing Insider Security Threats (MIST 2012).
29.
S. Sharmila Deva Selvi, S. Sree Vivek, Vivek Krishna Pradhan and C. Pandu Rangan: Efficient
Certificateless Online/Offline Signature for the Cloud, Accepted in 4th International Workshop on Managing
Insider Security Threats (MIST 2012).
30.
S. Sharmila Deva Selvi, S. Sree Vivek, Salini Selvaraj Kowsalya and C. Pandu Rangan: PKI Based
Signcryption Without Pairing : An Efficient Scheme With Tight Security Reduction, Accepted in 4th International
Workshop on Managing Insider Security Threats (MIST 2012).
JOURNAL PUBLICATIONS:
2011:
1.
Sharmila Deva Selvi, S. Sree Vivek, C. Pandu Rangan: вЂњIdentity Based Ring Signcryption Schemes
RevisitedвЂќ. Journal of Math-for-Industry-2011A, 2011.
2.
S. Sree Vivek, S. Sharmila Deva Selvi, V. Radha Kishan, C. Pandu Rangan: вЂњConditional Proxy ReEncryption - A more Efficient ConstructionвЂќ. Accepted in The International Journal of Network Security & Its
Applications (IJNSA)
About me :
I started my career as a lecturer in the Computer Science and Engineering Department of The PET Engineering
College in India, which is affiliated to Anna University. I worked there for three years and six months. During my
service there, I taught basic engineering subjects to undergraduate students. More specifically, I taught Data
Structure, Computer Algorithms, Programming Languages C and C++, Object Oriented Programming, Compiler
Design, Computer Architecture, Unix System Programming and Digital Electronics. At first I felt hard to deal with
new subjects and face students immediately after graduation. I had to spent most of the time preparing class
notes and presentations. After some time I found it interesting to do this and got fully indulged into teaching. My
knowledge on these subjects improved due to my preparation and the valuable doubts rose by students in the
class. My post graduation was at this period and my knowledge has improved a lot due to my teaching experience
and was able to excel with flying colors in my post graduation. I used to present to my fellow lecturers new areas,
which I read, from the Internet or from new textbooks. It was very much appreciated by the head of the
department. I handled several undergraduate laboratory courses and projects during this period.
Next, I joined the Jimma University, in Ethiopia. I delivered my service as lecturer there for one year and six
months. There too, I was able to impart knowledge to the undergraduate students on subjects like Data Structure,
Computer Algorithms, Programming Languages C and C++, Object Oriented Programming and Computer
Architecture. Every semester I received good feedback from the head of the department. It was during my stay
there, my passion towards research started. I started reading research articles and journals at this time and I
started the quest.
Currently I am a PhD scholar in IIT Madras. I have acted as teaching assistant for a variety of classes including
Theoretical Computer Science, Cryptography Theory and Practice, Design and Analysis of Algorithms & Data
Structures. I have also secured the вЂњBEST Teaching Assistant AwardвЂќ during this period. As my research is on
public key cryptography, I wish to teach cryptography in the advanced level. There were lots of students from
other institutes who come for internship to our institution. I have acted as a mentor to them and had frequented
discussions with them. This helped me share lot of ideas and thoughts with them. Often I offer tutorials to the new
comers to introduce the state of the art and enlighten young brains.
Education :
PhD:
Doctor of Philosophy:
Indian Institute of Technology (IIT) Madras, Chennai, India
Jan 2008 вЂ“ Oct 2012
M.Tech: Master of Technology, Computer & Information Technology;
Manonmaniam Sundaranar University, Trinelveli, India,
First class with distinction
Aug 2002- July 2004
B.E:
Bachelor of Engineering, Computer Science and Engineering;
Madurai Kamaraj University, Madurai, India,
First class
July 1997 вЂ“ June 2001
HSC:
Higher Secondary School Education
SLB Higher Secondary School, Nagercoil;
First class with distinction
May 1995 вЂ“ March 1997
E-mail id : ssreevivek@gmail.com
Ashok Gautham J
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Shankar Balachandran
Title of thesis : Energy Efficient Shared Data Synchronization
Thesis abstract : Shared data synchronization is at the heart of the multi-core revolution since it is essential for
writing concurrent programs. Ideally, a synchronization technique should be able to fully exploit the available
cores, leading to improved performance. However, with the growing demand for energy-efficient systems, it also
needs to work within the energy and power budget of the system. In this thesis, various shared data
synchronization techniques are compared and characterized. Further, enery-efficient alternatives are proposed.
Skills :
Strong
C, C++, Python, Bash
Make
Git, Mercurial
GNU/Linux
PThreads, RSTM
Emacs
Familiar
Java, Scala, Ruby, Common Lisp, Haskell
LaTeX
Qt
Research interests :
Computer Architecture
Parallel Computing
Energy Efficiency
Areas of interest : Computer Architecture, Parallel Computing
Publications/Conferences :
Ashok Gautham, Kunal Korgaonkar, Patanjali SLPSK, Shankar Balachandran, and Kamakoti Veezhinathan, "The
Implications of Shared Data Synchronization Techniques on Multi-Core Energy Ef?ciency" HotPower '12, October
2012
About me :
I am an open-source enthusiast and am very strong at *nix-like operating systems. I love programming languages
and spend a lot of time picking up a new programming language. I love working with large code bases. I am a
minimalist by nature. I love debating. I have given talks about open-source technologies at a few colleges. I
helped set up the DCF lab in the Computer Science department taking up the task of porting users and file shares
to newer operating systems and writing scripts to automate the setup of new systems.
Education :
B.Tech Information Technology, 2006-2010, Meenakshi Sundararajan Enginnering College (Affiliated with Anna
University)
E-mail id : AshokGautham@gmail.com
Debarun Kar
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Sutanu Chakraborti , Balaraman Ravindran
Title of thesis : Novel Feature Weighting, Confidence based Prediction and Visual Data Mining Techniques with
Applications to Case Based Reasoning Systems
Thesis abstract : The quality of the cases maintained in a case base has a direct influence on the quality of the
proposed solutions. The presence of cases that do not conform to the similarity hypothesis decreases the
alignment of the case base and often degrades the performance of a CBR system. It is therefore important to find
out the suitability of each case for the application of CBR and associate a solution with a certain degree of
confidence. Feature weighting is another important aspect that determines the success of a system, as the
presence of irrelevant and redundant attributes also results in incorrect solutions. We explore these problems in
conjunction with a real-world CBR application called InfoChrom. It is used to predict the values of several soil
nutrients based on features extracted from a chromatogram image of a soil sample. We propose novel feature
weighting techniques based on alignment, as well as a new alignment and confidence measure as potential
solutions. The hypotheses are evaluated on UCI datasets and the case base of Infochrom and show promising
results. We have also looked into the aspects of visualization of high-dimensional spaces for effective multivariate data analysis using parallel coordinates.
Skills :
Computer Programming : C, C++, Java, SQL, Matlab, R, Weka
Matlab skill set : Linear algebra, nonlinear numerical methods, polynomials, statistics, visualization
Matlab Toolboxes : statistics, curve-fitting, optimization, neural network, image processing, bioinformatics,
parallel computing
Markup Languages : HTML, XML, LaTeX
Operating Systems : Microsoft Windows family, Linux
Research interests :
My currnt research interest lies in mining and analyzing high dimensional heterogenous data, like web data (both
text, images and videos), astronomical data, etc. My goal is to learn interesting elements of the underlying
distribution(s) that generated the data and how it was generated. I am primarily interested in statistical and
machine learning or AI related techniques that help us achieve the above.
In the future, I would also like to work on algorithmic game theory, multi-agent systems and social choice theory.
Areas of interest : Machine Learning, Game AI, Stream Reasoning, Information Retrieval, Semantic Web, Case
Based Reasoning
Publications/Conferences :
Kar, D., Chakraborti, S., and Ravindran, B. Feature Weighting and Confidence based Prediction for Case
Based Reasoning Systems. In: Case-based Reasoning Research and Development - Proceedings of the
International Conference on Case based Reasoning, LNAI (Springer), Sept 3-6, 2012. Oral Presentation.
Choudhury, P. P., Sahoo, S., Hasssan, S. K., Basu, S., Kar, D., Ghosh, D., Ghosh, A., Ghosh, A., and
Ghosh, A.K. Classification of Cellular Automata Rules based on their Properties. In: Proceedings of the
International Conference on Trends in Optics and Photonics, Mar 2009. Oral Presentation.
$ERXWPHHi, I'm Debarun Kar, more fondly called 'Dolby' by old school mates. My hometown is The City of Joy (Kolkata).
did my schooling from South Point High School, which featured in the Guiness Book of World Records for being
the largest educational institute in the world.
I'm currently enrolled as an MS (Research) student in the CSE department at the Indian Institute of Technology
(IIT) Madras. I'm part of two labs : Artificial Intelligence and Databases (AIDB) and the Interactive Intelligence
Laboratory (IIL), which is part of the Reconfigurable and Intelligent Systems Engineering (RISE) group. I am
advised by (in last-name lexicographic order) Dr. Sutanu Chakraborti and Dr. Balaraman Ravindran.
For my MS thesis, I've been working in machine learning, case based reasoning and visualization of highdimensional spaces for effective multi-variate data analysis.
My future research interests lie at the intersection of computer science and economics. It includes, but is not
limited to, specific areas in algorithmic game theory & its applications to the internet and development of the field
of multi-agent systems, mechanism design and machine learning.
Education :
MS (CSE), 2010 - Present, IIT Madras
B.Tech (CSE), 2005-2009, Netaji Subhash Engineering College, WBUT (Kolkata)
E-mail id : maverickdebx@gmail.com
Ganesh Chennimalai Sankaran
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Prof. Krishna M. Sivalingam
Title of thesis : ONU POWER SAVING MECHANISMS IN PASSIVE OPTICAL NETWORKS
Thesis abstract : Power efficiency will be one of the primary factors dictating the choice of future network
deployments. Passive Optical Networks (PON) in general consume less power and are well positioned to be the
technology of choice for future access networks. In a PON, the Optical Network Units (ONU), that provide the
interface between the end user and the optical line terminal (OLT), consume a substantial amount of power. In
particular, large buffer capacity typically in the order of megabytes (MB) is required for holding the upstream
packets at the ONU. In this thesis,we propose three schemes viz. Zero Buffers (ZB),Node Proportional Buffers
(NB) and Rate Proportional Buffers (RB). They impose aggressive buffer capacity constraints on the ONU to save
power. With this, the packets will be buffered predominantly at the EN. By buffering at the EN, an increase in the
end to end packet delay is expected. The network performance of the proposed schemes is studied through a
discrete-event simulation model. The simulation results indicate that despite buffer size reduction, an acceptable
network performance can be achieved.
Skills :
Problem solving
Research interests :
Optical Access Networks, Power efficiency and Resource Optimization
Areas of interest : Optical Access Networks, Power efficiency
Publications/Conferences :
1. Neeharika Jana, C. S. Ganesh, Krishna M. Sivalingam and Gerard Parr, вЂњPerformance Analysis of Dynamic
Bandwidth Allocation Algorithms for LongReach PONsвЂќ, in IEEE International Symposium on Advanced Networks
and Telecommunications Systems (ANTS), (Mumbai, India), Dec 2010.
2. C. S.Ganesh and Krishna M. Sivalingam, вЂњONUBuffer Elimination for Power
Savings in Passive Optical NetworksвЂќ, in IEEE International Conference on
Communications (ICC), (Kyoto, Japan), Jun. 2011.
3. Anusha Sivakumar, C. S. Ganesh, Krishna M. Sivalingam and Gerard Parr, вЂњProtection Architectures for WDM
Passive Optical Networks: A SurveyвЂќ, in Resilient Optical Network Design: Advances in Fault-Tolerant
Methodologies, (Ed.: Kavian Sharif), IGI Global. Dec 2011
4. Anusha Sivakumar, C. S. Ganesh and Krishna M. Sivalingam, вЂњONUWavelength
Grouping Scheme for Efficient Scheduling in Long Reach-PONsвЂќ, in IEEE International Symposium on Advanced
Networks and Telecommunications Systems (ANTS), (Bengaluru, India), Dec 2011.
5. C. S. Ganesh and Krishna M. Sivalingam, вЂњReporting in ONUs with Reduced
BuffersвЂќ, in International Conference on Optical Network Design and Modeling, (Colchester, UK), Apr. 2012.
6. Anusha Sivakumar, C. S. Ganesh and Krishna M. Sivalingam, вЂњA Comparative
Study of DBA algorithms for Long Reach Passive Optical NetworksвЂќ,
(To Appear) in Institute of Electronic and Telecommunication Engineers
Technical Review.
$ERXWPH
Working with HCL Cisco Offshore Development center since 1999 on Network Management products/services
and recently in to Deep packet inspection product line. Holds 10 patents mostly in the area of Network
Management and LAN switching. Currently working towards his Ph.D at IIT Madras.
Education :
M.S (by Research) Computer Science and Enginnering, 2009-2012, IIT Madras
B.E Electronics and Communications Engineering, 1995-1999, Alagappa Chettiar College of Engg and Tech,
Karaikudi
E-mail id : chsganesh@hotmail.com
Manimaran S S
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Dr. B Ravindran
Title of thesis : Practical applications of Reinforcement learning in robotics
Thesis abstract : Sampling based planners have been successfully applied in path planning problems in robotic
domain. However they do not perform well in general optimal control of complex non holonomic systems. We
propose an algorithm for extending conventional RRT like planners to underactuated systems by combining them
with Reinforcement Learning techniques. This results in a new RRT based algorithm that can solve optimal
control tasks.
Skills :
Languages : C/C++, Python, L TEX, Matlab
Operating Systems : Windows, Linux
Technologies : GIT, ROS, OpenCV, OpenRave, OpenNI, Aria, Arduino
Robotic Platforms : Create, Kinect, Pioneer 3DX
Research interests :
Robotics
Machine Learning
Robot Learning
Areas of interest : Machine Learning, Reinforcement Learning, robotics, Data Mining
Publications/Conferences :
Pradyot K. V. N., Manimaran, S. S., Ravindran, B., and Natarajan, S. (2012) "Integrating Human
Instructions and Reinforcement Learners : An SRL Approach". To appear in the Proceedings of the UAI
workshop on Statistical Relational AI (StarAI 2012).
Pradyot, K. V. N., Manimaran, S. S., and Ravindran, B. (2012) "Instructing a Reinforcement Learner". To
appear in the Proceedings of the Twenty Fifth Florida AI Research Society Conference (FLAIRS 2012).
AAAI Press.
Aswin, N. R., Manimaran S. S., Harini A., and Ravindran, B. (2010) "Accurate Mobile Robot Localization in
Indoor environments using Bluetooth". In the Proceedings of the 2010 IEEE International Conference on
Robotics and Automation (ICRA 2010), pp. 4391-4396. IEEE Press
About me :
Im a roboticist who specializes in robot learning. Im interesting in applying learning techniques to enable robots to
learn novel tasks throughout their lifetime.
Education :
B.Tech Computer Science and Engineering, 2006-2010, National Institute of Technology, Tiruchirappalli
E-mail id : mani10j@gmail.com
Mehta Hemang Kandarpbhai
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Prof D. Janakiram
Title of thesis : Design and Implementation of a Service Abstraction-Based Operating System with a Case Study
of Linux Kernel
Thesis abstract : Traditional procedural operating system (OS) kernels sacrifice maintainability and
understandability for optimum performance. Though object oriented (OO) kernels can address these problems
upto a certain extent, they lack the layered approach of services and service compositions. We present a new
kernel design model Dhara, that raises the level of abstraction from objects and procedures to services. The
service model of Dhara is richer in abstractions than current web service model and paves the way for building a
new distributed OS kernel. Dhara conceives an OS as being constructed by multiple stacks of services containing
several layers of abstracted services. A key research challenge we envisage in building such model is automatic
service compositions of kernel services which can provide desired QoS. A kernel built using Dhara can easily be
customized using composed services to derive optimal performance for different applications such as databases.
A prototype is developed using Linux kernel as a case study by applying the design concepts of Dhara. We show
that overhead of implementation of Dhara is 5% to 15%, which is reasonable, considering the advantages of new
design and increased capacity of the hardware in recent times.
Skills :
Programming Languages: C, C++, Java
Comfortable with research and anyalysis
Good knowledge of Linux kernel internals
Research interests :
Design of Operating Systems
Kernel Programming
Distributed Systems
Areas of interest : Design of Operating Systems, Kernel Programming, Distributed Systems
Publications/Conferences :
H Mehta, S J Balaji, D Janakiram, вЂњA g++ Extension for Supporting Nontrivial Designated InitializersвЂќ at
10th Intl. Conf. on Numerical Analysis and Applied Math. (ICNAAM 12), September 19-25, 2012, Kos,
Greece
D Janakiram, H Mehta, S J Balaji, вЂњDhara: A Service Abstraction Based OS Kernel Design ModelвЂќ at 17th
Intl. Conf. on Engineering of Complex Comp. Systems (ICECCS 12), p. 127 вЂ“ 136, July 18-20, 2012,
Paris, France
V Rajani, H Mehta, S J Balaji, D Janakiram, вЂњKAAS : Kernel As A ServiceвЂќ at 8th World Congress on
Services (SERVICES 12), p. 340 вЂ“ 345, June 2012, Hawaii, USA
About me :
I am a research scholar, pursuing MS in Computer Science at IIT Madras. My research areas include Operating
Systems, Distributed Systems and Kernel Programming.
Education :
B. Tech Computer Engineering, 2004-2008, Institute of Technology, Nirma University, Ahmedabad, India
E-mail id : hemang.hkm@gmail.com
Prasun Kumar
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Dr. Jayalal Sarma M. N.
Title of thesis : Degree Sequence and Sets - Algorithms and Combinatorial aspects
Thesis abstract : Representation of graphs is a fundamental problem in graph theory. Adjacency matrix/list is
one way of representing graphs using O(|V|2) space. Similarly,there is another alternative way of representing
them through their degree sequence at the cost of loosing uniqueness which takes O(|V|log|V|) space. Degree
sequence d=<d1,d2,вЂ¦.,dn> of a graph G(V,E),where V={v1,v2,..,vn}, is defined as a sequence such that for all i
?[n], deg(vi)=di. Similarly, if we collect distinct terms in the degree sequence we get the corresponding Degree
set. There exists characterizations of different graphs, viz. simple graphs, trees, connected graphs, bipartite
graphs, digraphs etc., in terms of degree sequence and sets. For DAGs this problem is NP-complete. All
characterizations mentioned above are of potential nature so we are trying to forcibly characterize DAGs in
degree sequence world. We are also exploring similar results in degree set domain.
Skills :
programming languages known : C, C++, Python
OS used : Windows XP, windows 7, Ubuntu, Fedora
Graph Theory, Discrete Maths, Algorithms, Theory of Computation
Research interests :
Graph Theory, Algorithms, Combinatorics
Areas of interest : Graph Theory, Theory of Computation, Discrete Maths, Algorithms
Publications/Conferences :
Communicated in WALCOM-2013 :
"prasun kumar, Jayalal Sarma M N, Saurabh Sawlani", "On Directed Tree Realizations of Degree sets"
About me :
I am Prasun. I am currently working on Degree Sequence, Sets and their combinatorial aspects in Graph theory.
Finding new stuffs, getting some good results in my research area excites me enough and i always try to enhance
my knowledge base and skills so that i can apply them to get some good outputs that gives me a lot of
satisfaction.
Education :
B.Tech Computer Science & Engg, 2006-2010, Kalyani Govt Engg College, West Bengal
MS(by research) Computer Science & Engg, 2011-2013, IIT Madras
E-mail id : prasun.kgec@gmail.com
Preethi Chandur
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Prof. Krishnamoorthy M Sivalingam
Title of thesis : Study of Scheduling Algorithms in IEEE 802.16e and 3GPP Release - 10 networks
Thesis abstract : Resource allocation problem is a widely researched area in wireless broadband networks given
the complexity of the problem and the growing popularity of 4G technologies. The first part of the work is
regarding the performance of some well known scheduling algorithms such as PF (Proportional Fairness),
MLWDF (Modified Longest Weighted Delay First), Exponential rule and its variants with respect to WiMAX or
IEEE 802.16e networks. A new scheduling algorithm based on the exponential rule has been proposed and
compared to the previously mentioned algorithms. The study shows that hierarchical schedulers i.e, the ones
which use different scheduling rules for different traffic types perform better in a WiMAX scenario. Scheduling
algortihms like MLWDF and exponential rule for waiting times are more effective in allocating resources to realtime applications and proportional fairness, proposed variation of exponential rule work effectively for non-real
time applications. The simulation for this part of the work has been done on OPNET Modeler. The second part of
the study proposes a scheduling algorithm for streaming video applications which allocate resources based on the
QoE (Quality of Experience) of the users. This part of the work has been done on NS-3 modeler over an LTE
network.
Skills :
C,C++, shell scripting, Perl, Python
Simulators: NS3, OPNET Modeler
Research interests :
Wireless Communication networks
Areas of interest : Wireless and cellular communications, Cloud Computing, Computer networks
Publications/Conferences :
Preethi Chandur, Karthik R.M and Krishna Sivalingam, "Performance Evaluation of Scheduling Algorithms for
Mobile WiMAX Networks", PerCom Workshops 2012,pp 764-769
About me :
Looking for development jobs in computer networks, preferably wireless domain.
Education :
B.E Information Science, 2004-2008, PESIT, Bangalore
E-mail id : chandur.preethi@gmail.com
R. Anand Kumar
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Deepak Khemani
Title of thesis : Planning for the Convoy Movement Problem
Thesis abstract : Convoy movement problem has significant practical applications. Convoys are groups of
vehicles that travel between a source and a destination. Depending on the requirements, these convoys have to
obey certain constraints. The problem has been attempted in many styles with varying results. We try to address it
as an AI Search and Planning & Scheduling problem. The work focuses on modeling the convoy movement
problem using PDDL and attempting a solution using existing planning methods and planners. Initial results
indicated problems of scalability. To address this we propose a two stage planning process. This can be extended
to many stages depending on need.
Skills :
C, C++, Java
Qt, JaxaFX
Linux Kernel
AI Planning, Search
Research interests :
Artificial Intelligence Planning
Areas of interest : artificial intelligence, Planning, Search
Publications/Conferences :
Anand Kumar, I. Murugeswari, Deepak Khemani and N.S. Narayanaswamy, Planning for the Convoy Movement
Problem, ICAART 2012
About me :
I am interested in computers and photography. My area of research is artificial intelligence planning. I found this to
be an interesting area because it is universally applicable, we do it all the time and yet it is quite diffcult to achieve
in a computing machine. This is an important area of human intelligence.
Education :
M.S. Computer Science and Engineering, 2010 - , IIT Madras
B.Tech Computer Science and Engineering, 2003-2007, Pondicherry Engineering College
E-mail id : anandr86@gmail.com
Rangadurai Karthick R
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Dr. B Ravindran
Title of thesis : Sequence Modelling to Detect Netwok Intrusions
Thesis abstract : Intrusion detection systems(IDSs) play a key role in detecting malicious activities and enable
administratorsin securing network systems. Anomaly based IDS profiles normal traffic behaviour and flags any
deviation from the model as anomalous. We propose anomaly based IDS for TCP based traffic. The work done is
in three parts - simple sequence modelling classfier, hybrid approach combining two IDS and a layered sequence
learner to explain the nature of TCP traffic. First, we propose a Hidden Markov Model (HMM) based IDS to
model TCP traffi c. The inherent sequential nature of TCP tra ffic is captured effectively using HMM. TCP packet
features are used to learn the parameters of the model. Various design choices and performance improvement
measures were included to make the model e ffective. The model gave high detection accuracy with very low
false positive rate on various data sets. Second, we propose a hybrid model combining the proposed HMM
classifier with a Na ve Bayes (NB) based classifier. This merging of classifiers is to address a few
shortcomings which prevented HMM model from being a stand-alone classifier. The NB model acts as an online
classifier with the HMM as its o ffline counterpart. The combined model was tested with various real-time data
sets and found to perform well. Third, we propose a layered model, containing an ensemble of basic HMMs, to
model TCP connections. Contrary to the usual notion of classifying connections, this model tries to explain how a
TCP connection evolves over time. Diff erent configurations of the model have been built and tested with very
long TCP connections.
Skills :
Programming: C, C++
Scripting: Shell, Perl, Python
Tools: Matlab, R
Research interests :
Machine Learning, Natural Language Processing, Big Data, Data Mining
Areas of interest : Machine Learning, Natural Language Processing, Data Mining, Big Data
Publications/Conferences :
Rangadurai Karthick, R., Vipul P. Hattiwale and Ravindran, B, Adaptive Network Intrusion Detection
System using a Hybrid Approach. COMSNETS, 2012.
About me :
Graduate Student at CSE Department
Education :
BTech Information Technology, 2004-2008, Thangavelu Engineering College.
E-mail id : ranga1729@gmail.com
Subhadeep Dey
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Hema A. Murthy
Title of thesis : Universal Syllable models for language identification
Thesis abstract : Automatic Spoken Language Recognition makes extensive use of phonotactics for identifying a
language. The accuracy of phonotactic information depends upon the amount of data available for training. The
state of the art approaches capture the phonotactics in terms of phonemes. But building a phoneme tokeniser
needs labelled speech corpora which is expensive. In my work, I have suggested an alternative to phoneme
tokens, namely, syllable based tokens. Syllables implicitly capture the phonotactics. Modelling sequence
information requires modelling of syllable tokens by Hidden Markov Models (HMMs). Although, unsupervised
HMM clustering successfully determines syllable inventory in every language, it nevertheless, requires significant
tuning of parameters. It is suggested the use of a universal syllable models initially. These syllable models are
then adapted for every language. Experimental results on benchmark dataset show that the proposed approach is
very promising and performs quite well as that of a manually trained system.
Research interests :
Speech Processing, Speaker and Language Identification, Machine Learning.
Areas of interest : Speech Processing, Machine Learning
Publications/Conferences :
Subhadeep Dey, Rajeev Rajan, Padmanabhan R. and Hema Murthy, вЂњFeature
Diversity for Emotion, Language and Speaker VerificationвЂќ, National Conference on Communication 2011, IISc
Bangalore
Subhadeep Dey and Hema Murthy, вЂњUniversal Syllable Tokeniser for Language
IdentificationвЂќ, National Conference on Communication 2012, IIT Kharagpur.
Subhadeep Dey and Hema Murthy, вЂњUnsupervised Clustering of syllables for
language identificationвЂќ, European Signal Processing Conference 2012, Bucharest, Romania.
Education :
B.Tech Computer Science and Engineering, NIT Silchar.
M.S
Computer Science and Engineering, IIT Madras.
E-mail id : sdd.nits@gmail.com
Vadiraj Panchamukhi
Master of Science by Research (MS)
Department of Computer Science and Engineering
Guide : Prof. Hema A. Murthy
Title of thesis : Traffic Verification - A frame work for port-based anomaly detection
Thesis abstract : An anomaly is an activity that deviates from the wellknown behaviour of the system. Anomaly
detection in networks is of interest from two perspectives: an organizationвЂ™s perspective and an Internet Service
ProviderвЂ™s (ISP) perspective. Protection of its computer network infrastructure is an important task for all
organizations. Organizations desire that their networks are robust and resilient to any kind of attack. Anomaly
detection forms an important part of this network resiliency. Also the ISPs want to maximize the utilization of their
resources. Hence an ISP would be interested to know any resource failure immediately so as to correct the
problem. ISPs would also be interested in safeguarding their network from malicious activities. We describe here
a Gaussian Mixture Model (GMM)-based traffic verification system as a paradigm for network anomaly detection.
The traffic characteristics aggregated over a period of time is given to the model to verify the validity of the traffic.
If the traffic does not obey the model then we raise an alarm flagging it as an anomaly.
Skills :
Unix shell scripting
C
Linux Kernel Programming
Research interests :
Network traffic Modeling
Network Security
Areas of interest : Machine Learning, Network Traffic Modeling, Network Security, Design of Operating Systems
Publications/Conferences :
Panchamukhi, V., Murthy, H.A., вЂњPort-based Traffic Verification as a paradigm for Anomaly Detection,вЂќ Proc. of
National Conference on Communications (NCC) 2012, February 2012, IIT Kharagpur.
About me :
Have a total of about 6 years of experience
3 years of Research experience as a Project Associate at IIT Madras
3 years of experience in Software Development.
Have done Research in Network Anomaly Detection
Have experience in Linux Device Drivers Development, Java/J2EE
Education :
2008 вЂ“ 2013, M.S. in Computer Science and Engineering at IIT Madras, Chennai.
2000 -- 2004, B.E. in Computer Science and Engineering from K. L. S. Gogte Institute of Technology,
Belgaum, Karnataka affiliated to Visvesvaraya (Visveswaraiah) Technological University, Belgaum,
Karnataka with an aggregate of 68.47%.
E-mail id : vadiraj.panchamukhi@gmail.com
Department of Engineering Design
Bharath Ram S
Doctor of Philosophy (PhD)
Department of Engineering Design
Guide : M Ramanathan
Title of thesis : Matching of freeform shapes in 2D
Thesis abstract : Matching and retrieval of shapes, both in two and three dimensions, have been a topic of
interest to researchers in the field of computer graphics, vision and geometric modeling for more than a decade. A
shape is defied as a set of freeform curves/surfaces forming a closed loop. A freeform curve/surface is typically
represented in Bezier or B-spline form. A prominent approach to matching curved outline is the graph-based
approach, where a skeleton such as medial-axis or Voronoi-diagram is used for obtaining the graph. In general,
graph matching is a hard problem and the comparison costs increase proportionally with graph size and hence
slows down the process. Moreover, the computation of skeletons for freeform shapes is an intricate problem. The
main aim of this research is to use shape functions like the shortest path and medial axis for matching and
retrieval, because they are more robust, easy to compute/represent, and compact in terms of computer memory.
To aid in matching and retrieval, shape signatures are then obtained from shape functions.
Skills :
Geometric algorithms: IRIT, OpenGL and OpenCV
Programming: C and Matlab
CAD : CATIA,Pro-e,Autodesk Inventor
Design and Analysis: Ansys, ADAMS, Fluent
Research interests :
Computational geometry
Computer aided design
Geometric algorithms
Shape matching and feature extraction
Pattern recognition
Finite element analysis and optimization
Areas of interest : Computational geometry, Computer aided design, Geometric algorithms, Shape matching and
feature extraction, Pattern recognition, Finite element analysis and optimization
Publications/Conferences :
вЂ�S. Bharath Ram and M. Ramanathan, "Shortest path in a simply-connected domain having curved
boundary", Computer-Aided Design, 43(8), 2011, pp. 923-933. вЂ�
About me :
I am an mechanical engineer currently working in the broad field of Computer Aided Design and Engineering. I
graduated from College of engineering, Guindy (CEG), Anna University in 2009 (CGPA 8.9) and briefly worked in
Bharat Petroleum for 6 months. I was an endowment award winner for Engineering Graphics and ardent coder in
C and VB (codes for Su-Do-Ku solving, multiplayer Nots-and-Cross etc). Due to my interest in CAD and
programming, I got associated with Dr. M Ramanathan in Engineering Design at IIT Madras. So I quit my job and
joined as MS research scholar in January 2010 batch under Dr. M Ramanathan in Engineering Design. As I
developed lot of interest in research (and with a good CGPA of 9.4), I upgraded myself to direct PhD. Presently I
am working to solve the freeform curve matching problem using exact algorithms for shape functions.
Education :
B.E Mechanical Engineering, 2005-2009, College of Engineering, Guindy (CEG), Anna University,
Chennai
E-mail id : bharathsram@gmail.com
S.saravanakumar
Doctor of Philosophy (PhD)
Department of Engineering Design
Guide : Dr. Asokan Thondiyath
Title of thesis : INVESTIGATIONS ON OBSTACLE AVOIDANCE AND PATH FOLLOWING OF AN
UNDERACTUATED FLAT-FISH TYPE AUTONOMOUS UNDERWATER VEHICLE IN 3D SPACE
Thesis abstract : The main objective of the research is to develop control strategy and control algorithm for
obstacle avoidance and dynamic path planning of a flat-fish shaped underactuated AUV in 3D space by
incorporating the vehicle speed variations, obstacle size and obstacle speed in the control strategy. The proposed
research work is to improve the precision and accuracy of vehicle guidance and navigation system which will
enable more challenging missions in underwater applications possible. To develop a detailed mathematical model
of a flat-fish shaped underactuated AUV by considering the dynamics of the vehicle. To design a suitable control
strategy and control algorithm for obstacle avoidance and dynamic path planning in 3D space. To incorporate the
vehicle speed variations, object size and object speed in the control strategy. To simulate and study the behavior
of the system under different operating conditions. To develop a hardware in the loop simulator (HIL) using
dSPACE for implementing the control algorithm in real time.
Skills :
Mechanical Software
: Autodesk InventorSeries and AutoCAD
: Matlab/Simulink, dSPACE-RTI, controlDEsk and Targetlink, and LabVIEW
Control Software
: Windows and Linux
Operating Systems
Programming Languages : C, VHDL and Python
Research interests :
Robotics,
Dynamic system modeling and simulation,
Control Systems,
Mechatronics Systems,
Microcontrollers,
Embedded systems and
Automotive electronics
Areas of interest : Modeling and Simulaion, Robotics and Control, and Rapid control prototyping and HIL tesing
Publications/Conferences :
Subramaniam Saravanakumar and Thondiyath Asokan, вЂњAn Improved Guidance Algorithm for Smooth
Transition at Way-Points in 3D Space for Autonomous Underwater VehiclesвЂќ , International Journal of
Ocean System Engineering, Vol. 2, No.3, September 2102, pp. 139-150.
S. Saravanakumar, G. Thomas and T. Asokan, вЂњObstacle avoidance using multipoint potential field
approach for an underactuated flat-fish type autonomous underwater vehicle in dynamic environmentвЂќ,
International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM -2012), Malaysia,
November 2012. (Accepted for publication).
S. Saravanakumar, G. Thomas and T. Asokan, вЂњHardware-in-the-Loop Verification for 3D Obstacle
Avoidance Algorithm of an Underactuated Flat-Fish Type AUVвЂќ , IEEE International Conference on
Robotics and Biomimetics (ROBIO 2012), Guangzhou, China, December, 2012 . (Accepted for
publication).
S. Saravanakumar, G. Thomas and T. Asokan, вЂњdSPACE DS-1104 based Real-Time Verification of 3D
Collision Avoidance for Autonomous Underwater VehiclesвЂќ, dSPACE user conference, Bangalore,
September 2012.
Divya Konda, B. Keerthana and S.Saravanakumar, вЂњA Review of Path Planning Algorithms for Planar
Navigation of Autonomous Underwater RobotвЂќ, International Conference on Computer Vision and
Robotics, Tiruppathi, October 2012.
S. Saravanakumar, Divya Konda, B. Keerthana and T. Asokan, вЂњ3D modeling and virtual simulator for a
flat-fish shaped Autonomous Underwater VehicleвЂќ, 2nd International Conference on Modeling, Simulation
and Analysis, Coimbatore, India, December 2011, pp.385-390.
S. Saravanakumar and T. Asokan, вЂњPath planning of autonomous underwater vehicle in 3D space for
smooth transition at waypointsвЂќ, 2nd IASTED International Conference on Robotics (Robo 2011),
Pittsburgh, USA, November 2011, pp. 338-344.
S. Saravanakumar and T. Asokan, вЂњWaypoint guidance based planar path following and obstacle
avoidance of autonomous underwater vehicleвЂќ, 8th International Conference on Information in Control,
Automation and Robotics, The Netherlands , July 2011, pp. 191-19.
M. Santhakumar, S. Saravanakumar, T. Thiruppathi and T. Asokan, вЂњDesign of Interactive Simulation
System and Graphical User Interface for Underwater Vehicle Control and NavigationвЂќ, 8th ISOPE Ocean
Mining Symposium, NIOT, Chennai, India, September 2009, pp. 290-294.
About me :
To be a researcher with good analytical and problem solving abilities, positive approach to work and to be a
solution provider to the problems associated with the organization and human society with professional ethics. To
be a technical leader with good working relationship to the management as well as co-workers through
communication and inter personal skills.
Education :
M.Tech Machatronics Engineering, 2001-2003, Vellore Institute of Technology (VIT) Vellore
B.E Electronics and Instrumentation Engineering, 1995-1999, Bharathiyar University Coimbatore
E-mail id : srsaravanakumar@gmail.com
A. Vijay Alagappan
Master of Science by Research (MS)
Department of Engineering Design
Guide : Prof. R. KrishnaKumar
Title of thesis : Estimation of tyre road forces through FEA
Thesis abstract : The forces involved in longitudinal and lateral vehicle dynamics at the tyre road interface are
estimated using finite element analysis.
Skills :
Solid Modeling - CATIA, NX
Analysis - Abaqus, ANSYS, Adams, CarSim
Programming - C/C++, FORTRAN, MATLAB
Control Software - Simulink,LabVIEW
Research interests :
Vehicle Dynamics & Control
Tyre Mechanics & Tyre Models
Computational Mechanics (Finite Element Analysis)
Areas of interest : Automotive Systems, Vehicle Dynamics & Control, NVH, Computational Mechanics
Education :
B.E. Mechanical Engineering, Thiagarajar College of Engineering, Madurai
E-mail id : a.vijay.alagappan@gmail.com
K Mythreyi
Master of Science by Research (MS)
Department of Engineering Design
Guide : Dr. R. Krishnakumar and Dr. C.S.Shankar Ram
Title of thesis : Closed Loop Control of Blood Glucose Levels in Diabetic Patients
Thesis abstract : Control of blood glucose levels in glucose-insulin regulatory system is necessary in the diabetic
patients. BGL is measured using a glucose sensor. To maintain constant BGL, a control strategy is implemented
in the computer using Matlab and the amount of insulin to be injected is estimated. A novel mathematical model of
delay differential equations for glucose-insulin interactions in diabetic patients is proposed. An observer is
designed to measure the state estimates of the model. These state estimates can then be used in the control
algorithm. A few parameters in the mathematical model are patient specific and these must be estimated for
accurate modeling. The control algorithm calculates the amount of insulin to be injected to the patient to maintain
the BGL in the normal range. This value is then fed to the infusion pump hardware and the drug is delivered
accordingly.
Skills :
Languages - Embedded C, MATLAB
Hardware
- Board design with analog and digital circuitry
MSP430 microcontrollers, TMS320 microprocessor
Software
- Matlab, Code Composer Studio, IAR Workbench
Research interests :
Embedded system design
Nonlinear control system
System identification
Areas of interest : Embedded system design, Nonlinear control system and System identification
Education :
M.S in Biomedical device design and Nonlinear controls, 2010-2013, IIT Madras
B.Tech in Electronics and Communication Engineering, 2006-2010, JNTU, Hyderabad
XII in Maths Physics and Chemistry, 2005, Board of Intermediate, 2005, Hyderabad
E-mail id : kondapimythreyi@gmail.com
S V S Suresh
Master of Science by Research (MS)
Department of Engineering Design
Guide : Prof. R. Krishna Kumar & Prof. V. Kamakoti
Title of thesis : Design and development of Wireless ECG device and implementation of heart rate detection
algorithm
Thesis abstract : A novel design of a portable low cost wireless wearable ECG device is presented. This device
acquires the raw ECG signal using electrodes placed on the chest of the subject. An analog circuit board
conditions this raw signal which is then sent to the microcontroller for further filtration of artifacts. A novel method
is used for phase compensation. Bluetooth module receives the filtered data from the microcontroller and
transmits it to the userвЂ™s phone where the ECG is displayed and simultaneously stored in text and JPEG format.
The recorded JPEG image can be transmitted to the doctorвЂ™s mobile phone via MMS and the latter can give an
instant feedback. The analog front-end (AFE) module is designed using low cost reliable components. TIвЂ™s
MSP430F47186 microcontroller runs the digital filters written in C language. The Bluetooth module вЂќWT12вЂќ is
from Bluegiga and the system requires 3 volts for operation. The Android application was written in Java for
acquiring, plotting and storing the data in the phoneвЂ™s SD card, in text and JPEG formats. Samsung Galaxy Fit
android phone was used for the prototype design. All through the system design, cost incurred was kept to a
minimum.
Skills :
Technical skills:
Programming languages - Embedded C, C++, Java (Android OS), PLC ladder programming.
Hardware: 16 bit and 32 bit microcontrollers.
Robots: Yaskawa and Motoman Industrial Robot teaching.
Research interests :
Embedded System Design
Analog and Digital Signal Processing
Areas of interest : Electronics-analog circuits, signal processing and electronic systems design
Publications/Conferences :
Portable low cost 3 Lead wireless wearable ECG device
S.V.S. Suresh(1), R. Krishna Kumar(1) and V. Kamakoti(2)
1 Department of Engineering Design, Indian Institute of Technology Madras, Chennai, India
2 Department of Computer Science and Engineering, Indian Institute of Technology Madras, Chennai, India
M. Long (Ed.): World Congress on Medical Physics and Biomedical Engineering, IFMBE Proceedings 39, pp.
1331вЂ“1334, 2012.
(WC2012, Beijing,China)
About me :
I love reading biographies of scientists, mathematicians or any other inspirirational person. Listening to hindi
music is my favourite past-time. Playing the keyboard and singing sufi songs,discussing about music and science
are among other interests.
Education :
M.S (by research ) in Department of Engineering Design, IIT Madras (2010 - 2013).
B.E. Electronics and Communication Engineering (2001 - 2005), SJMIT, Karnataka.
XII and X from Gulmohur High School, Jamshedpur (2001 & 1999 respectively).
E-mail id : sureshsusurla@gmail.com
S Vinuchackravarthy
Master of Science by Research (MS)
Department of Engineering Design
Guide : Sankara J Subramaniam
Title of thesis : Implementation and application of 3D-Digital Image Correlation
Thesis abstract : Developed software for performing three-dimensional Digital Image Correlation (3-D DIC), a
non contact, full-field experimental technique for estimating the shape, displacement and strain in a deforming
body. The software uses the techniques of corner and centroid finding, image rectification, image matching, image
interpolation, image denoising, and image thresholding; and contains the following modules: Calibration of stereo
rig, using an open-source code Computation of stereo correspondences between pairs of acquired images
Estimation of 3-D shapes of object through the course of deformation Measurement of in-plane and out-of-plane
displacement by correlation of 3-D shapes Validated each software module and demonstrated that the computed
3-D displacements were as accurate as or better than those computed by Vic-3D, the most popular commercial
3-D DIC software Implemented an algorithm for calibrating the stereo rig setup using the square and dotted grid
patterns Proposed a new method for reducing noise in computed 3-D surfaces using Principal Component
Analysis (PCA) Validated proposed method on several sets of synthetic data to which varying amounts of
Gaussian noise was added (manuscript under preparation) Studied efficacy of different ligation techniques used in
orthodontic brackets using 2D-DIC Designed the experimental set-up with Autodesk Inventor Fabricated fixture
and platform for holding a bracket and turning an archwire through it using two stepper motors Acquired images of
a 4 mm2 area of the bracket and performed DIC to show that both elastomeric ligation and steel-wire ligation are
both effective in improving bracket stiffness Assessed quality of boiler header tube at Bharat Heavy Electricals
Limited (BHEL), Trichy, India using edge detection and thresholding. Studied initiation of the crack propagation in
carbon-fibre reinforced polymer (CFRP) material under fatigue loading using 2-D DIC. This initial study
demonstrated that DIC can be used as an effective tool for studying initiation and propagation of damage Assisted
and mentored others in various DIC measurements: uniaxial tensile tests of friction-deposited samples, biaxial
tests of aluminium samples and 3-D measurement of strain evolution during friction-stir welding Carried out
preliminary studies of change in curvature of Krypton substrate after deposition of aluminium and full field
deformation of stainless steel stents used in angioplasty using 2-D DIC technique in a laboratory setting
Developed software for performing three-dimensional Digital Image Correlation (3-D DIC), a non contact, full-field
experimental technique for estimating the shape, displacement and strain in a deforming body. The software uses
the techniques of corner and centroid finding, image rectification, image matching, image interpolation, image
denoising, and image thresholding; and contains the following modules: Calibration of stereo rig, using an opensource code Computation of stereo correspondences between pairs of acquired images Estimation of 3-D shapes
of object through the course of deformation Measurement of in-plane and out-of-plane displacement by correlation
of 3-D shapes Validated each software module and demonstrated that the computed 3-D displacements were as
accurate as or better than those computed by Vic-3D, the most popular commercial 3-D DIC software
Implemented an algorithm for calibrating the stereo rig setup using the square and dotted grid patterns Proposed
a new method for reducing noise in computed 3-D surfaces using Principal Component Analysis (PCA) Validated
proposed method on several sets of synthetic data to which varying amounts of Gaussian noise was added
(manuscript under preparation) Studied efficacy of different ligation techniques used in orthodontic brackets using
2D-DIC Designed the experimental set-up with Autodesk Inventor Fabricated fixture and platform for holding a
bracket and turning an archwire through it using two stepper motors Acquired images of a 4 mm2 area of the
bracket and performed DIC to show that both elastomeric ligation and steel-wire ligation are both effective in
improving bracket stiffness Assessed quality of boiler header tube at Bharat Heavy Electricals Limited (BHEL),
Trichy, India using edge detection and thresholding. Studied initiation of the crack propagation in carbon-fibre
reinforced polymer (CFRP) material under fatigue loading using 2-D DIC. This initial study demonstrated that DIC
can be used as an effective tool for studying initiation and propagation of damage Assisted and mentored others
in various DIC measurements: uniaxial tensile tests of friction-deposited samples, biaxial tests of aluminium
samples and 3-D measurement of strain evolution during friction-stir welding Carried out preliminary studies of
change in curvature of Krypton substrate after deposition of aluminium and full field deformation of stainless steel
stents used in angioplasty using 2-D DIC technique in a laboratory setting Developed software for performing
three-dimensional Digital Image Correlation (3-D DIC), a non contact, full-field experimental technique for
estimating the shape, displacement and strain in a deforming body. The software uses the techniques of corner
and centroid finding, image rectification, image matching, image interpolation, image denoising, and image
thresholding; and contains the following modules: Calibration of stereo rig, using an open-source code
Computation of stereo correspondences between pairs of acquired images Estimation of 3-D shapes of object
through the course of deformation Measurement of in-plane and out-of-plane displacement by correlation of 3-D
shapes Validated each software module and demonstrated that the computed 3-D displacements were as
accurate as or better than those computed by Vic-3D, the most popular commercial 3-D DIC software
Implemented an algorithm for calibrating the stereo rig setup using the square and dotted grid patterns Proposed
a new method for reducing noise in computed 3-D surfaces using Principal Component Analysis (PCA) Validated
proposed method on several sets of synthetic data to which varying amounts of Gaussian noise was added
(manuscript under preparation) Studied efficacy of different ligation techniques used in orthodontic brackets using
2D-DIC Designed the experimental set-up with Autodesk Inventor Fabricated fixture and platform for holding a
bracket and turning an archwire through it using two stepper motors Acquired images of a 4 mm2 area of the
bracket and performed DIC to show that both elastomeric ligation and steel-wire ligation are both effective in
improving bracket stiffness Assessed quality of boiler header tube at Bharat Heavy Electricals Limited (BHEL),
Trichy, India using edge detection and thresholding. Studied initiation of the crack propagation in carbon-fibre
reinforced polymer (CFRP) material under fatigue loading using 2-D DIC. This initial study demonstrated that DIC
can be used as an effective tool for studying initiation and propagation of damage Assisted and mentored others
in various DIC measurements: uniaxial tensile tests of friction-deposited samples, biaxial tests of aluminium
samples and 3-D measurement of strain evolution during friction-stir welding Carried out preliminary studies of
change in curvature of Krypton substrate after deposition of aluminium and full field deformation of stainless steel
stents used in angioplasty using 2-D DIC technique in a laboratory setting
Skills :
VIC 2D,
VIC 3D,
ANSYS (introductory level),
Abaqus,
Pro-E,
SolidWorks,
Autodesk Inventor,
LaTeX,
MATLAB,
C,
MS Windows and
MS Office Suite
Research interests :
3D-Digital Image Correlation
Experimental mechanics
Solid mechanics
Areas of interest : Experimental mechanics, Solid Mechanics, Production Engineering
Publications/Conferences :
Vinuchackravarthy, S., and Sankara J Subramaniam., Curvature computation from stereo images using Principal
Component Analysis, manuscript in preparation
About me :
Always interested to learn continuously and provide technical leadership
Education :
M. S., Department of Engineering Design, Indian Institute of Technology, Madras , Sep 2012
B. E., Production Engineering, Madras Institute of Technology, Anna university, June 2009
E-mail id : vinu.arasu@gmail.com
Umesh Neettiyath
Master of Science by Research (MS)
Department of Engineering Design
Guide : Dr. T. Asokan
Title of thesis : Formation Control of Multiple Autonomous Underwater Vehicles
Thesis abstract : Multi robot coordination and control for underwater robots is an area of significant importance in
many underwater missions. A new approach for leader follower formation control of multi AUV systems is
formulated. Termed state estimation based controller, this estimates the next desired position of the follower robot
from the past and current positions of the leader and follower robots. The control signals are then issued to the
follower robot to align it to the estimated trajectory. This control scheme has the capability to compensate for initial
errors and follow the leader under various operational scenarios. The system was simulated in Matlab/ Simulink
and is found to be efficient. A fleet of surface vessels were constructed which was used to test the real world
implementation of the system.
Skills :
Simulation : Matlab/ Simulink, Scilab
Embedded Systems : Assembly,AVR, PIC, Arduino
Programming : C, Python, Fortran,VBscript
PCB Design : Orcad, Eagle,etc.
OS Environments : Windows, Linux
Research interests :
Underwater robotics
Mobile robots
Multi-robot formation control
Areas of interest : robotics, multirobot systems, mechatronic systems, electronic circuit design - analog and
digital, Programming, Model Based Design, mathematics
Publications/Conferences :
Umesh, N., Asokan, T., вЂњImproved Leader Follower Formation Control of Autonomous Underwater
Vehicles Using State EstimationвЂќ, International Conference on Informatics in Control,Automation and
Robotics (ICINCO), Rome, Italy, July 2012
Umesh, N., Asokan, T., вЂќ Leader Follower Formation Control of Multiple Autonomous Underwater
VehiclesвЂќ, Robotics Society of India Workshop on Advances in Robotics, New Delhi, India, July 2012
About me :
I am a student/researcher, curious about almost anything that challenges my imagination. I am interested in
hands on projects, while I get excited by seeing a beautiful equation.
I have a lot of passion for robotics, which is why I joined IIT Madras in the first place. I take part in a lot of activities
ranging from poetry and spirituality to badminton. Also, I like to sit and enjoy the beautiful nature around me.
Education :
BTech in Electronics and Communication Engineering, 2004-2008, Govt. Engg. College Thrissur
E-mail id : umesh.original@gmail.com
Venkataramesh Bhimasingu
Master of Science by Research (MS)
Department of Engineering Design
Guide : Dr. Nilesh Jayantilal Vasa
Title of thesis : Influence of Substrate Temperature, Pressure and Grit Size on Synthesis of SiC Thin Film by
Pulsed Laser Deposition Technique
Thesis abstract : PLD technique to minimize the droplet formation on the film by varying different grit designation
has been incorporated and also the effect of substrate temparature and pressur and grit size of the particle has
been studied by different t characterization techniques for crystalline structure, surface morphology, elemental
composition, elastic modulus (GPa), hardness (GPa), thickness etc were investigated by standard techniques
like XRDA, SEM, EDS, Nano Indentation andoptical surface pro?lometer measurement techniques are described.
Skills :
basics in "c"
Research interests :
1. Pulsed Laser Deposition of SiC Thinfilms For Photo-Voltaic Applications.
Areas of interest : semiconductor devices
Publications/Conferences :
conference proceedings
Venkataramesh Bhimasingu, N. J. Vasa, вЂњPulse Laser Deposition of SiC Thin Films on Crystalline-Si and
Glass SubstratesвЂќ, International Conference on Trends in Optics and Photonics 2011, Kolkata, December
7-9, 2011.
Venkataramesh Bhimasingu, N. J. Vasa, I. A. Palani, вЂќInfluence of Substrate Temperature, Pressure and
Grit Size on Synthesis of SiC Thin Film by Pulsed Laser Deposition TechniqueвЂќ International Conference
on Intelligent Robotics, Automation and Manufacturing (IRAM) 2012, Malaysia, November 28-30, 2012
(Accepted for oral presentation).
BOOK CHAPTER
B. Venkataramesh, Nilesh J. Vasa, вЂњSynthesis of Polycrystalline Silicon Carbide (SiC) Thin Film Using
Pulsed Laser DepositionвЂќ ZnO Indo Japan Symposium, January 9-19, 2012.
About me :
Teaching Assistant for undergraduate students. Trained for the same.
Secretary of residing hostel for social activities.
Member of Optical Society of America (OSA).
Education :
B.Tech Electronics and communication engineering, 2005-2009, Sir C. R. Reddy college of engineering.
MS in Engineering Design,2010-2013,IIT Madras.
E-mail id : bviitm@gmail.com
Department of Electrical Engineering
A.vijayakumar
Doctor of Philosophy (PhD)
Department of Electrical Engineering
Guide : Dr. Shanti Bhattacharya
Title of thesis : Design, fabrication and evaluation of Fresnel based optical elements
Thesis abstract : Fresnel based optical elements like Fresnel zone lenses, Fresnel axicons are very attractive for
designing composite optical elements. Based on this idea, a phase shifted Fresnel zone lens with a diameter of 2
mm and more than 1300 zones was designed, fabricated using EB direct writing and implemented for coherent
generation of Terahertz radiation. A phase shifted Frensel axicon was designed for generation of multiple Bessel
beams suitable for optical interconnections. A spiral phase Fresnel zone plate was designed for generation of
more focused donut beams for optical trapping.
INSTRUMENTS HANDLED
1. Focused Ion Beam system and Scanning electron microscope (Quanta 3D FEG (FEI)).
2. Electron beam system (Elionix ELS3700S and (Quanta 400F (FEI)).
3. Spin coating machines, Sputtering unit.
4. Surface profilers (Dektak and Veeco).
5. UV lithography system вЂ“ Model J500 вЂ“ IR/Visible (Mask Aligner) вЂ“ OAI.
6. Optical microscopes вЂ“ Nikon eclipse LV150 and basic systems.
7. Optical spectrum analyzers and wavemeters.
8. DBR lasers, He-Ne lasers etc
Research interests :
1. Diffractive optics
2. Interferometry
3. Holography and computer generated holograms
4. Micro/Nano fabrication
Areas of interest : Diffractive optics, Interferometry, Holography and computer generated holograms, Micro/Nano
fabrication
Publications/Conferences :
Journals
1.
A.Vijayakumar and Shanti Bhattacharya, вЂњDesign and fabrication of a spiral phase Fresnel zone lens for
optical trapping,вЂќ Appl.Opt. 51 6038-6044 (2012).
(Publisher вЂ“ Optical Society of America, Impact factor вЂ“ 1.748)
2.
A. Vijayakumar, M. Uemukai and T. Suhara, вЂњPhase-Shifted Fresnel Zone Lenses for Photomixing
Generation of Coherent THz Wave,вЂќ Jpn. J. Appl. Phys. 51 070206 (2012).
(Publisher вЂ“ Japanese society of applied physics, Impact factor вЂ“ 1.058)
3.
A.Vijayakumar and Shanti Bhattacharya, вЂњPhase shifted Fresnel Axicon,вЂќ Opt.Lett. 37, 1980-1982 (2012).
(Publisher вЂ“ Optical Society of America, Impact factor вЂ“ 3.399)
Conferences
1.
V.Pramitha, A.Vijayakumar and Shanti Bhattacharya, вЂ�Multilevel spiral phase plate by electron beam
lithography for optical trappingвЂ™ to be presented in 12th international conference on MOEMS and Minaturized
systems (SPIE).
2.
V.Pramitha, M.S.Gayathri, A.Vijayakumar and Shanti Bhattacharya, вЂњFocused ion beam fabricated
subwavelength gratings,вЂќ to be presented in IEEE International Nanoelectronics Conference.
3.
A.Vijayakumar and Shanti Bhattacharya, вЂњDesign, Fabrication and Evaluation of a micro Fraxicon,вЂќ to be
presented in Photonics 2012.
4.
A.Vijayakumar and Shanti Bhattacharya, вЂњDesign of Multilevel Spiral Phase Fresnel Zone Plates,вЂќ Optical
MEMS and Nanophotonics (OMN), 2012 International Conference on, 95-96 (IEEE xplore).
5.
A.Vijayakumar and Shanti Bhattacharya, вЂњAnalysis of versatile phase zone plates,вЂќ Proc. SPIE 8173,
817316 (2010). Photonics 2010, IIT Guwahati, December 2010.
Physics education
1.
A.Vijayakumar, B. J. Jackin and P. K. Palanisamy, вЂњComputer generated Fourier holograms for UG
laboratory,вЂќ submitted to Physics Education.
2.
A. Vijayakumar and S. R. Inbanathan, вЂњA simple intensity tuner for laser,вЂќ Bulletin of IAPT Jan 2012.
3.
A.Vijayakumar, вЂњAn opto-electronic spring balance based on Michelson interferometer,вЂќ Bulletin of IAPT
2009.
4.
A.Vijayakumar and S. R. Inbanathan, вЂњA simple Fizeau wavemeter,вЂќ Bulletin of IAPT, Sep 2007.
5.
A.Vijayakumar, Sathya Sheela and Israel Stalin, вЂњStudy of motion with linear time dependent variation of
acceleration,вЂќ Bulletin of IAPT, Feb 2007.
About me :
PROJECTS COMPLETED:
Г� вЂњDesign of a Diffraction ScannerвЂќ at UG physics Department, The American College.
Duration вЂ“ 6 months.
Г� вЂњDesign of a Michelson Interferometer based wavemeterвЂќ under JNCASR summer research programme,
Raman Research Institute, Bangalore.
Duration вЂ“ 2 months.
Г� вЂњDesign of a Fizeau wavemeterвЂќ at Raman Research Institute, Bangalore.
Duration вЂ“ 6 months.
Г�
Reading project in вЂњQuantum Information TheoryвЂќ at Institute of Mathematical Sciences, Chennai.
Duration вЂ“ 2 months.
SCHOLARSHIPS AND PRIZES
Г� Einstein prize вЂ“ B.Sc physics
Г� Manuel.A.Thangaraj prize вЂ“ B.Sc physics
Г� Richard Riez Prize вЂ“ M.Sc physics
Г� Project Eureka вЂ“ State level competition вЂ“ First Prize вЂ“ B.Sc
Г� Quiz competition вЂ“ B.Sc
Г� JNCASR summer student вЂ“ B.Sc
Г� IMSc summer student вЂ“ M.Sc
Г� MEXT (Monbukagakusho Fellowship) research student вЂ“ (2010 вЂ“ 2012)
POSITIONS OF RESPONSIBILITY
1. Reviewer of applied optics Journal.
2. M.Tech Student Representative (Aug 2007 вЂ“ June 2009).
3. Service Learning Programme вЂ“ Student Representative (Aug 2001 вЂ“ June 2003)
4. National Service Scheme leader вЂ“ (Aug 2001 вЂ“ June 2003).
Education :
Г� Master of Technology in Laser and Electro Optical Engineering
Institution
: Anna University, Chennai.
Degree issued by
: Anna University, Chennai.
Course Duration
: August 2007 - May 2009
Year of passing
: May 2009
Percentage of Marks
: 84.5%
Dissertation
: Computer generated Fourier holograms
Advisor
: Dr.P. K. Palanisamy
Г� Master of Science in Physics
Institution
: The American College
Degree issued by
: Madurai Kamaraj University, Madurai.
Course Duration
: June 2005вЂ“ April 2007
Year of passing
: April 2007
Percentage of Marks
: 77.8%
Dissertation
: 1. Analysis of salt solutions using Beer Lambert Law
Advisor
: Dr. S. Stephen Rajkumar Inbanathan
Dissertation
: 2. Quantum Information Processing
Advisor
: Dr. K. Gnanasekaran
Г� Bachelor of Science in Physics
Institution
: The American College
Degree issued by
: Madurai Kamaraj University, Madurai.
Course Duration
: June 2001 вЂ“ April 2004
Year of passing
: April 2004
Percentage of Marks
: 82%
Dissertation
: Fabrication of a Diffraction Scanner
Advisor
: Mr. N. Manickam
COMPUTER SKILLS
Г� Operating systems known
Г� Programming Languages
E-mail id : physics.vijay@gmail.com
: Windows operating system
: Matlab, Visual C++, Lab VIEW etc
Aravinth S
Doctor of Philosophy (PhD)
Department of Electrical Engineering
Guide : Prof. R Sarathi
Title of thesis : Influence of nano particles produced through wire explosion process on polymeric-composite
electrical insulation.
Thesis abstract : Nanoparticles are known to have enhanced properties due to their increased surface to
volume ratio. In the present research, tungsten-carbide nanoparticles are produced through wire explosion
process and its influence as a nano filler material in polymer nanocomposites are under investigation for
alternative partial discharge free electrical insulation.
Skills :
Languages and programming : C, Matlab, Ladder program, Assembly language and LabVIEW
Simulation and design
: SPICE, COMSOL, AutoCAD and SolidWorks
Project management and office : Mindmeister, MS office packages
Research interests :
Nanoparticle generation and characterization
Polymeric electrical insulation
Nano dielectrics
Condition monitoring of power apparatus
Areas of interest : Nanomaterils, Micro/Nano fabrication, system automation, electrical insulation, green energy
Publications/Conferences :
S Aravinth, Binu Sankar, S R Chakravarthy and R Sarathi, Generation and Characterization of Nano
Tungsten Oxide particles by Wire Explosion Process, Materials Characterization, 2011, 62, 248 вЂ“ 255.
S Aravinth, Binu Sankar, M Kamaraj, S R Chakravathy and R Sarathi , Synthesis and characterization of
hexagonal nano tungsten carbide powder using multi walled carbon nanotubes. International Journal of
Refractory Metals and Hard Materials, 2012, 33, 53-57.
About me :
Passionate about engineering research which can provide solutions to todays' society's problems.
Education :
Diploma in Electrical and electronics Engg., 2001вЂ“2004, DOTE-TN.
BE in Electrical and electronics Engg., 2004вЂ“2007, Anna Univ.
MS-Ph.D in Electrical Engg., 2008вЂ“2013, IIT Madras.
E-mail id : aravinth.iitm@gmail.com
Karthik Ks
Doctor of Philosophy (PhD)
Department of Electrical Engineering
Guide : Bhaskar Ramamurthi
Title of thesis : Wireless Relays for Proximate Destination Node Clusters
Thesis abstract : The focus of my Ph.D research work is on the use of advanced relays in wireless systems
comprising a large number of nodes that are constrained by physical size and energy restrictions.
Skills :
C, C++, MATLAB
Research interests :
Wireless and cellular communications, relaying and interference mitigation in wireless networks, signal processing
methods for communications, cellular standards.
Areas of interest : Wireless and cellular communications
Publications/Conferences :
K. S. Karthik and B. Ramamurthi, вЂњPrediction of SINR improvement with a directional antenna or antenna array in
a cellular system,вЂќ in Proc. Nat. Conf. Commun. (NCCвЂ™11), Bangalore, India, 2011, pp. 1вЂ“5.
About me :
I am interested in wireless communications in general and cellular communications in particular.
Education :
B.E, Electronics and Communications Engineering, 2001-2005, BMS College of Engineering, Bangalore
E-mail id : kartks@gmail.com
R Sugunakar Reddy
Doctor of Philosophy (PhD)
Department of Electrical Engineering
Guide : R Sarathi
Title of thesis : Wire explosion technique for synthesizing alloy (stainless steel) nanoparticles & Zr Compound
(ZrC & ZrN) nanoparticles
Thesis abstract : Stainless steel is an excellent corrossion resistive material & have interesting magnetic
properties, nanomaterials have an improved properties because of it's higher surface to volume ratio. I am
working on wire explosion technique for synthesizing stainless steel nanoparticles. These nanoparticles will be
characterized, and will be studied for corrosion resistance & magnetic property. ZrC & ZrN Nanoparticles are
synthesized by wire explosion process using Zr as source material. These particles are characterized using
various characterisation techniques. I am also working on modelling of wire explossion process
Skills :
Languages: C, Matlab, Assembly language
Simulation tools: COMSOL basics, Simulink, OrCAD & LabVIEW
Interpretation of characterization results like XRD, VSM, FT-IR, UV-Visible, SEM / TEM SAED
Research interests :
Nanotechnology
High Voltage engineering,
Power Electronics
Control Systems
Digital Signal Processing
Areas of interest : Nanotechnology, high voltage, Power Electronics, control system, Digital Signal Processing
Publications/Conferences :
R SugunakarReddy, M Kamaraj, U KamachiMudali, SR Chakravarthy, R Sarathi вЂњGeneration and
Characterization of Zirconium Nitride Nanoparticles by Wire Explosion ProcessвЂќ Ceramics
International38(07), September 2012, pp. 5507вЂ“5512
R SugunakarReddy, M Kamaraj, U KamachiMudali, SR Chakravarthy, R Sarathi вЂњGeneration and
Characterization of Zirconium Carbide Nanoparticles by Wire Explosion ProcessвЂќ Materials
Transactions53(08), 2012, pp.1420-1424
About me :
I am interested in fields which involves multiple disciplines
Ready to work, which involves mathematics, simulation & Experimentation
Education :
B.Tech Electrical & Electronics Engineering 2003-2007, HIT&M affilated to JNTU
M.Tech Nanotechnolgy, Jawaharlal Nehru Technological University Hyderabad
E-mail id : ee10d018@ee.iitm.ac.in
Abhishek Ranjan
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Boby George
Title of thesis : New Capacitive Sensors for Safety Application
Thesis abstract : Determining human presence is a critical parameter attached to safety. Capacitive sensors
proves to be very low power consuming and efficient in this regard unlike IR , thermal or weight based sensors.
One such scenario is of babies being left behind in parked cars which seems to be unalarming yet has proved to
be fatal in many cases reported in different countries. Parents or guardians forgets their child inside car
(intentionally or un-intentionally) due to hectic urban lifestye. The temperature inside increases rapidly even on a
normal day. Since the thermoregulatory system in children are underdeveloped child often suffers from
hyperthermia. Sensors to detect the presence of a baby , like the ones used for adult seat occupancy have been
built to avoid such mishaps. The ones available are based mechanical switches, weight , thermal and optical
methods. Capacitive based sensors for such application are much more reliable.
Skills :
Virtual Instrumentation: LabVIEW
Finite Element analysis : Comsol Mutiphysics
Research interests :
Capacitive Sensors
Signal Conditioning
Automation
Areas of interest : system automation, signal processing and electronic systems design
About me :
I am a person who loves exploring and keep learning whether it in technical domain or in personal life. From
technical view point I like challenging position to explore and innovate - to make things better, however small it
may be.
Education :
B. E Electronics and Communication, 2006-2010, Panjab University Chandigarh
M.S Control and Instrumentation, 2011-2013, IIT Madras
E-mail id : ee11s020@ee.iitm.ac.in
Bharath L R
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. R. Aravind and Dr. RadhaKrishna Ganti
Title of thesis : Outage and Goodput analysis in ARQ multiple access channels
Thesis abstract : Automatic repeat request (ARQ) protocol is used to combat packet losses in error prone
networks. It is a simple protocol which retransmits packet until it is received successfully at the receiver. ARQ
protocol is well understood in point to point communication and the optimal packet reliability for maximizing
goodput is known. In our work we consider ARQ in a fading multiple access channel (MAC) scenario where a
number of users transmits information packets to a single receiver. With ARQ, goodput (long term average of rate
at which packets are successfully received) is a function of transmission rate and packet error probability. Since
we consider a fading MAC, the packet error probability is given by the channel outage which is the probability that
a chosen rate cannot be sustained by the channel. In a MAC, there are two notions of outage probabilities:
Common and Individual outage probability. Under these two notions of outage probabilities, we analyse the
optimal packet error probability that will maximize goodput for different SNRs and number of users.
Skills :
Programming Languages: C, MATLAB, Mathematica
Research interests :
Research allocation and optimization problems in Multiple Access Channels
ARQ & Hybrid ARQ protocols in wireless communications
MIMO techniques
Areas of interest : PHY layer design and development, Cross layer algorithms, MIMO techniques, Signal
Processing
Publications/Conferences :
Bharath Rao, R. K. Ganti and R. Aravind, "Outage and Goodput analysis in ARQ multiple access
channels", IEEE proc, SCC' 13, Jan 2013, Munich, Germany.
Education :
Bachelor of Engineering in Electronics and Communications from Shri Jayachamarajendra College of
Engg.(SJCE), Mysore (2003-07).
E-mail id : bharath.rao21@gmail.com
Bhargav Srinivas Ch
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. S Umesh
Title of thesis : Adaptive Training for Triphones with less amount of data
Thesis abstract : A large amount of data is needed to build a Speaker Independent (SI) model because of large
number of parameters. Building a SI model with less amount of data often causes a problem. Here, we develop a
new technique to speech recognition, where all the triphone states of Hidden Markov Model (HMM) are obtained
by linear combination of monophone Gaussian Mixture Models (GMM). Instead of directly finding the parameters
of triphone state, we just need to find the linear combination that gives GMM for triphone state. This allows
significant reduction in number of parameters, which enables us to build the model with less amount of data.
Skills :
Programming Languages: Matlab, C
Tools: Hidden markov model Tool Kit (HTK)
Research interests :
Speech Recognition by Speaker Adaptation
Noise robust Speech Recognition
Areas of interest : Signal Processing, Machine Learning
About me :
Joined Speech Processing Group of IIT Madras in January 2011.
My work has been on adaptive training techniques which does speech recognition by speaker adaptation
and techniques which extract noise robust features for speech recognition.
Education :
B.E Electronics & Communications Engineering, 2006-2010, ANITS
E-mail id : baru.anits@gmail.com
Bincy B N
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr Venkatesh Ramaiyan
Title of thesis : An Oblivious Distributed Medium Access Protocol for Delay Optimality
Thesis abstract : A novel contention resolution protocol is developed which can be used for leader election in
any multiple access networks with absolutely no information about the network topology. This protocol is proved
to be the best compared to all existing protocol in terms of average delay to elect a leader in adverse conditions.
Using this protocol, all existing k-selection protocols in radio networks can be improved.
Skills :
Programming Languages: MATLAB, C
Softwares: MATHEMATICA, LyX, X-fig
Operating Systems Used: Ubuntu, Fedora, Windows.
Mathematical Analysis of Algorithms, Rubik's cube
Research interests :
Algorithm design and Analysis
MAC scheduling
Information Theory
Areas of interest : Mathematical Analysis of algorithms, Information Theory, Scheduling, Networking
Education :
B.Tech Electronics and Communication Engineering, 2005-2009, GEC Wayanad, Kerala
E-mail id : bincybaburaj@gmail.com
D S Pavan Kumar
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Prof. S. Umesh
Title of thesis : Efficient Feature Extraction for Noise Robust Speech Recognition
Thesis abstract : The accuracy of Automatic Speech Recognition (ASR) systems degrades severely in noisy
environments. Many approaches have been developed in literature to address the problem of robust speech
recognition, which include feature-normalization algorithms, model based compensation and adaptation methods,
etc. While implementing these methods, there is always a trade-off between the improvement in recognition
accuracy and the computational cost introduced by them. Therefore, to approach this problem optimally, we focus
on feature space normalization, which basically tries to refine the feature space from noise as much as possible
using various techniques.
Skills :
MATLAB, Scilab and GNU-Octave
Hidden Markov Model Toolkit (HTK)
C Programming
Linux Shell Programming
Research interests :
Speech Processing and Recognition
Pattern Recognition and Machine Learning
Signal Processing
Areas of interest : Speech Recognition, Speech Processing, Pattern recognition, Machine Learning, Signal
Processing
About me :
My primary interests are in building robust speech recognition algorithms that are immune to various kinds of
background noises, using the concepts of signal processing and machine learning. I currently work on improving
the current state-of-the-art feature normalization techniques
Education :
B.E. Electronics and Communication Engineering, 2006-2010, Sir C R Reddy College of Engineering,
Eluru
E-mail id : dspavankumar@gmail.com
Devika Jay
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Prof. K.Shanti Swarup
Title of thesis : ECONOMIC OPERATION OF SMART POWER SYSTEMS UNDER LOAD FREQUENCY
CONTROL
Thesis abstract : With the advent of Information Communication Technology, power systems have become
smarter. This facilitates a situation in which demand side management plays an important role in grid operation.
The first part of the thesis proposes a probability based model of the power gain achieved due to price based
demand response from thermostatically controlled loads. The advantage of this model is that an economic
operation from a consumer perspective is achieved. This model is then used to investigate the contribution of
demand response in Load Frequency Control. The results promise a positive potential for the participation of
demand response in Load Frequency Control. The second part of the thesis proposes an economic Load
Frequency Control scheme under a deregulated system in which competing generation companies are involved.
This scheme has been modeled as a stochastic game which is collaborative. The agents involved in the game
learn the optimal action, i.e. Nash Equilibrium of the game, with Reinforcement Learning based approach. The
advantage of the proposed scheme is that the generation companies produce optimal amount of power that is
required to minimize the cost of production of the system, preserving the concept of deregulation in the system
and competing among the companies. The simulation results show that the frequency deviation was also
minimized, which is the primary objective of Load Frequency Control.
Skills :
Programming - C,C#, ASP.NET, Matlab
Technologies - JavaScript, CSS, XML, HTML
Packages - MiPOWER, Power World Simulator
Research interests :
POWER SYSTEM OPERATION AND ECONOMICS
INTELLIGENT CONTROL SYSTEM
Areas of interest : POWER SYSTEMS. CONTROL SYSTEMS, Economics, GAME THEORY
Publications/Conferences :
Devika Jay, K.S. Swarup, вЂњDynamic Demand Response and Control in Smart Grid Environment", Proc. of
INDICON 2011, 16th to 18th Dec. 2011, Bits Pilani, Hyderabad.
Devika Jay, K.S. Swarup, вЂњFrequency Restoration using Dynamic Demand Control under Smart Grid
Environment", International Conference on Innovative Smart Grid Technologies (ISGT) 2011, India, 1st to
3rd December 2011.
Devika Jay, K.S Swarup, вЂњPrice Based Demand Response of Aggregated Thermostatically Controlled
Loads For Load Frequency ControlвЂќ, National Power System Conference, IIT-BHU. (Accepted),
December 2012.
About me :
Sincere, Enthusiastic and a Quick learner. With an objective to enhance my professional skills in research and
development of power systems and fostering the spirit of teamwork for organizational growth, thereby serving the
nation.
Education :
B.Tech (Electrical and Electronics) TKM College Of Engineering, Kerala University
E-mail id : devikajay@gmail.com
Dhivagar B
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Prof. K. Giridhar
Title of thesis : Advanced MIMO Receivers for SC-FDMA based Wireless Systems
Thesis abstract : As the 4G standard LTE have adapted SC-FDMA based Uplink transmission, advanced
receivers are being proposed by many people improving the performance of the system. Although a lot of
receivers are available for SISO models, MIMO based receivers for Multiple-Stream or Multi-User transmissions
are not analysed extensively . We are interesting in proposing an advanced receiver algorithm for MIMO based
transmission which performs better than any existing algorithm.
Skills :
High Level Languages - C,C++
Low Level Languages - Matlab, ITPP
OS - Linux, WIndows
Research interests :
Channel Equalization Algorithms for MIMO systems
Receiver Design for Advanced Wireless Systems
Areas of interest : Wireless and cellular communications
About me :
I am a Research Engineer working in CEWiT since 2007, responsible for simulation of System-Level-Models of
Wireless Networks. I designed the Multicell architecture of BWSim- A Broaadband Wireless simulator own by
CEWiT. And I am doing my MS as a part-time candidate under Prof.K.Giridhar since 2011.
Education :
B.E ECE , 2003-2007 , Madras Institute Of Technology
E-mail id : dhivagar.b@gmail.com
Durgum Khasim Hussain
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. R. Manivasakan
Title of thesis : Multiservice Dynamic Bandwidth Allocation in GPON Access Networks
Thesis abstract : Distributing available bandwidth fairly in GPON access networks is an issue. A Scheme is
developed to investigate the QoS parameters which supports Proportional Diffserv Model, and to allocate the
available Bandwidth relatively among the service classes. This results in satisfying the requirements of high
priority classes relative to the low priority classes.
Skills :
Programming Languages: C, C++, MATLAB
Packages/Tools: OPNET Modeler, OPNET SP GURU Transport Planner, Windows xp/07
Research interests :
Analysis of MAC Protocols
Optical Networks
Designing Scheduling Algorithms to attain best QoS parameters
SDH/SONET
Computer Networks
Areas of interest : communication (Networking)
About me :
I received B.Tech degree from JNTU Hyderabad. My Research interests includes computer networks,
Optical Networks, analysis of MAC protocols, scheduling algorithms and SDH/SONET. I would like to
pursue a career in communication industry and contribute novelty to the same. Apart from research career
I am interested in playing cricket, reading books and listening to music.
Education :
B.Tech in Electronics and Communication Engineering, 2005-2009, VIF College of Engineering and
Technology
E-mail id : khasimhussain@gmail.com
Gorla N Brahmendra
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Lakshminarasamma
Title of thesis : An active soft switching technique for phase shifted full bridge converters.
Thesis abstract : Full bridge converters are widely used for medium and high power applications. Phase shifted
full bridge converters are preferred because of their inherent zero voltage switching property for leading leg. ZVS
for lagging leg is load dependent. At light load conditions or for high input voltages, ZVS for lagging leg is not
possible. Many passive and active soft switching circuits are proposed in literature to address this issue. Passive
soft switching circuits are able to achieve ZVS for a wide range of load at the cost of reduced efficiency. The
novelty of proposed active soft switched circuit lies in achieving ZVS for active switches, ZCS during turn on and
turn off of auxiliary switches used. Since auxiliary switches are turned on for smaller durations, losses due to
additional circuit didn't have an impact on overall efficiency. A 350 W, 100 kHz and 200kHz prototypes are built to
validate the theory.
Skills :
Known simulation softwares: SABER, MATLAB, Pspice, LABVIEW;
PCB Design: Easy PC;
Languages known: C;
Hardware debugging;
High frequency PCB board desing;
Research interests :
Switched mode power conversion, Soft switching.
Areas of interest : Applications of Power Electronics in Power Systems, Power Electronics, SMPS.
Publications/Conferences :
Published:
1. Brahmendra, B.N.; Lakshminarasamma, N.; , "Novel soft transition pushpull converter: Analysis, modeling,
design and implementation," IECON 2011 - 37th Annual Conference on IEEE Industrial Electronics Society , vol.,
no., pp.1486-1491, 7-10 Nov. 2011
Accepted for publication:
2. Title: Novel Soft Transition Bridge Converter With Auxiliary Coupled Inductor,
Authors: Brahmendra G N, Lakshminarasamma N
Conf: IEEE International Conference on Power Electronics, Drives and Energy Systems 2012 (PEDES 2012)
3. Title: Analysis and Design of a Novel Active Soft Switched Phase-Shifted Full Bridge Converter
Authors: Brahmendra G N, Lakshminarasamma N
Conf: 34th International Conference on Electrical Machines and Power Electronics
Education :
B.Tech Electrical Engineering, 2006-2010 Bapatla Engineering College
MS Power Electronics, joined: July-2010, IITMadras
E-mail id : gorla.indra@gmail.com
Gurusanthosh P
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. R. Manivasakan
Title of thesis : Load optimized L2 mobility for LTE using OpenFlow switches
Thesis abstract : According to an estimate about mobile traffic forecasts, there will be an incredible growth in the
mobile data by the introduction of increased capacities of radio access technologies like LTE. The immediate
effect is the increase in signaling load pressure on the mobile backhaul. Hence, the present backhaul solutions
proposed for LTE, which are based on GTP cannot cope up with this increased signaling load on the core
network. This leads to the change in the direction of mobility implementation at layers other than network layer.
Mobility at Layer-2 is an attractive proposition since it hides mobility from network layer and consequently the IP
point of attachment remains static throughout the communication session. The basic issues of ethernet switch
based mobility schemes (such as poor scalability and flooding) make it complex to implement at Layer-2. But by
the advent of OpenFlow switches, the issues of typical ethernet switch are solved. We implemented a novel
mobility scheme using OpenFlow switches in the access and aggregation networks by making minimal changes to
the existing LTE mobility schemes. It is observed that handover latency and signaling load on the core network
are drastically reduced with a minimal increase in initial attach latency when compared with existing LTE mobility
schemes.
Skills :
Software programming: C,C++
Network programming: OmNet++
Packages: MATLAB
Hardware Description Language: VHDL
Research interests :
Mobility management in backhaul networks
QoS issues in backhaul networks
Areas of interest : Communication Networks, Mobile Backhaul Networks
About me :
Basically a deep thinker (generally thinks about the creation of this beautiful world) and a normal person
interested in leading a calm life. Tries to finish things as early as possible. Interested in learning new things.
Education :
B.Tech Electronics and Communications Engineering, 2006-2010, Rajeev Gandhi Memorial college of
Engineering, JNTA Nandyal
E-mail id : p.gurusanthosh@gmail.com
Harish Sasikumar
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Deepa Venkitesh, Dr. Bijoy Krishnadas
Title of thesis : Periodic Structures in Silicon Waveguides
Thesis abstract : Silicon photonics is an immerging and potential area of research which utilizes the conventional
CMOS and MEMS fabrication technology to realize various compact and high performance devices. In my
research, I have designed, fabricated and characterized Distributed Bragg Reflector (DBR) structures in silicon
waveguides. They have interesting device physics as well as a variety of uses in sensors and communication
devices. They can be used as optical equivalent for electronic filters which is an integral component of all-opticalsignal-processing. They are potential components in amplifieres and lasers. Also these structures can be used to
enhance, tailor or add some usefulness in the conventional optical devices like add-drop multiplexers,
interleavers, modulators, dispersion compensators, waveguide couplers, resonators etc. Though these structures
were well known and well implemented in many applications, their possibilities utilizing higher order diffraction
was not properly explored. As part of my research program, I have done the anlytical and numerical modelling of
these structures using coupled mode analysis and Fourier analysis. I have also demonstrated DBR in silicon
waveguides with eleventh order diffraction. The characterization results of the fabricated DBRs showed 85%
reflectivity and 2.5 nm full width at half maxima.
Skills :
General
Analytical and lateral thinking
Problem identification and solving
Computer
Implementation of data acquisition and control systems using microcontrollers and computers
Programming - C, Python, Matlab
Familiar Operating Systems - Linux, Windows
Modelling tools - MEEP, COMSOL
Softwares - LaTeX, MS Office, Photoshop, Macromedia Flash, Encryption and synchronization softwares
Research Specific
Microelectronic fabrication - photolithography, reactive ion etching, focused ion-beam milling, oxidation,
surface profiling
Optical characterization - familiar with optical spectrum analysers, lasers and development of
characterization setups.
Research interests :
Silicon Photonics
Integrated Optoelectronics
Microelectronics
Analog and Digital IC Design
Numerical Modelling and Programming
Quantum Computation
Areas of interest : Silicon Photonics, Integrated Optoelectronics, VLSI, Quantum Computation, Programming,
Computational Electromagnetics, Theoretical Physics, electronic circuit design - analog and digital
Publications/Conferences :
S. Harish, D. Venkitesh and, B.K. Das, вЂњHighly Efficient DBR in Silicon Waveguides with Eleventh Order
Diffraction,вЂќ SPIE, PHOTONICS-WEST, Feb 1-7, 2013, San Francisco, USA
About me :
I am an enthusiastic learner who finds joy in exploring the surprises of Physics. I believe that a good combination
of engineering skills, passion for maths and physics, and lateral thinking is the key for innovation.
Education :
B. Tech Electronics and Communication Engineering, 2006-2010, NSS College of Engineering, University of
Calicut
Master of Science (Research) Electrical Engineering, 2010-present, IIT Madras
E-mail id : harish.sasikumarbtech@gmail.com
Immanuel David Rajan M
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Bharath Bhikkaji
Title of thesis : (specified later)
Thesis abstract : Data Modelling and dimension reduction, Various ways to better the estimate, also to reduce
the data dimension so that computation becomes easier.
Skills :
MATLAB (GUI and Programming)
C
PCB designing
Logical Reasoning
Research interests :
Data Modelling and Estimation
Independent component analysis and Sparse signal Processing
Areas of interest : sparse signal processing, Detection and Estimation Theory, Probability Theory, Digital Signal
Processing, Acoustics
About me :
Curiosity with it's power to kill is the greatest motivator for research and to gain knowledge.
I try to be the best in my field of expertise and work towards the same.
Education :
B.Tech, Electrical Engineering, 2006- 2010, Amrita School of Engineering Coimbatore.
E-mail id : immanuel.tech@gmail.com
Kishore P
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr.Bhaskar Ramamurthi
Title of thesis : Development of a LTE Channel Emulator
Thesis abstract : Modeling a channel is important wireless communication systems. A wideband wireless
channel exhibits behaviors like path loss, fading, multipath, shadowing, noise, ISI, propagation delay, Doppler
shift and is highly time varying. Any wireless system designed has to me made fairly robust against these channel
behaviors. To test such algorithms, it is practically impossible to use the actual physical channel. A channel
emulator is a device which can mimic the actual physical channel by taking certain control inputs from the user
and creating a link which behaves like a actual physical wireless channel. My work is on developing such a device
for LTE applications.
Skills :
Languages: C, Embedded C, Assembly (Blackfin- BF533, BF537, BF561, Tigersharc TS201, uC 8051),
C++ basics
Scripting: MATLAB, SCILAB, Shell
HDL: Verilog
Tools: Visual DSP ++, Xilinx ISE, HTK , Modelsim, Proteus VSM, Roborealm, Packet tracer; DebuggersGDB, DDD
Interfacing DSPs/ ?Controllers to peripherals, using DSO, Spectrum analyzers, working knowledge on
devicedrivers for Blackfin 533/537 DSPвЂ™s.
Completed CCNA1 and CCNA2 courses (June 2008)
Research interests :
DSP and FPGA implementations
Image processing
Neural networks
Areas of interest : Real time Embedded systems (DSP & FPGA based), Image Processing, Neural networks
Publications/Conferences :
"Sarath Chandra V, Anup Kulkarni, Kishore Prahlad, Kavitha Gopal, Ashok Jhunjhunwala",
"Implementation of DSP Lab on a Cloud", " NCC", February 2012
About me :
Robotics and Embedded systems enthusiast
Fan of music/musical instruments, 3D origami and Rubik's cube
Education :
M.S, Electrical Engineering (currently pursuing), IIT Madras, Chennai, Cumulative GPA: 9.56/10
B.E, ECE, College of Engineering, Guindy, Anna University Chennai, Cumulative GPA: 8.47/10
12th Grade, Sri Chakravarthy Matriculation, Chennai Percentage: 95.33
E-mail id : kishore47ece@gmail.com
N.raguvaran
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr.Nitin Chandrachoodan
Title of thesis : Implementation of Time to Digital converter on an FPGA
Thesis abstract : Time to Digital Converter is a module which measures the time delay or difference between two
signals and produces the same as digital output. Here the goal is to create a time to digital converter module
which can measure the delay difference in the order of few 10вЂ™s of pico seconds. This project involved variety of
tasks which are given below.
Skills :
Programming language : VHDL, Verilog, C, SystemVerilog and SystemC
FPGA Design Tools : Xilinx ISE
Simulation Tools : ModelSim, Xilinx ISim, ActiveHDL, Questasim
Synthesis Tools : Xilinx XST, Synplify PRO, Quartus II
Timing Analyzing Tools : Xilinx P&R, Static Timing Analyzer
Debugging Tools : Chipscope
Tool chain & Compiler : Visual C++,
Bus Protocol Standards : GTP Transceiver, Ethernet, USB, SPI, RS232
Version control Tools : Redmine, Dropbox
FPGA Architecture : Spartan 3, Spartan3e, Virtex 4, Virtex 5
Research interests :
ASIC / FPGA based VLSI designs.
Areas of interest : FPGA, ASIC, VLSI, Digital circuit design and verification
About me :
Almost 5 years of experience in Digital design using VHDL/Verilog.
Having solid experience in all the phases of FPGA development cycle including requirements
analysis, device selection, RTL design, development, verification, timing closure, testing and
documentation.
Good knowledge in interfacing the FPGA with PC through Ethernet, USB and RS232r, ADC, DAC
and all the type of memory interfacing.
Good knowledge of programming using C++, Verilog.
Good knowledge on EDA tools like Xilinx ISE, Modelsim, Chipscope, Visual Studio, Matlab,
Python and Multisim.
Having knowledge in writing the Application Programming InterfaceвЂ™s (API) using C++ in Visual
studio for windows.
Having knowledge on interfaces like GTP Transceiver, Ethernet and UART.
Strong interpersonal and excellent communication skills.
Education :
MS (VLSI), secured 80% from IIT MADRAS, Chennai, Tamil nadu (2013)
B.Tech (Telecommunication Engineering), secured 85.30% from Vellore Institute of
Technology, Vellore, Tamil nadu (2007)
DIPLOMA (Electronics and Communication Engineering), secured 90.40% from Sri
Venkateswara Polytechnic College, Vellore, Tamil nadu (2004)
E-mail id : raguvar.n@gmail.com
Noel Augustine
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Anjan Chakravorty
Title of thesis : Compact Modeling of Non-Quasi-Static Effects in SiGe HBTs Using an Improved Charge
Partitioning Scheme
Thesis abstract : The excellent high-frequency performance of silicon germanium heterojunction bipolar
transistors (SiGe HBTs) makes them a suitable choice for radio frequency (RF) circuit applications. Efficient and
accurate non-quasi-static (NQS) models are required to predict the high-frequency behaviour of SiGe HBTs for
RF circuit design and simulation. The thesis presents the development of an accurate physics-based NQS model
using an improved charge partitioning scheme. The developed model is suitable for implementation in Verilog-A
and yields straightforward parameter extraction techniques. A more efficient NQS model is also developed that
offers similar accuracy and lesser simulation time. The bias dependence of the NQS model parameters is also
discussed.
Skills :
Simulation Tools: MEDICI, ATLAS, DEVICE, Spectre(CADENCE)
Programming Languages: Matlab, Python
Basic knowledge of C, C++
Research interests :
Semiconductor device modeling
Nanoelectronics
Areas of interest : semiconductor devices
Publications/Conferences :
Journals
Noel Augustine, Khamesh Kumar, Arkaprava Bhattacharya, Thomas Zimmer and Anjan Chakravorty,
"Modeling Non-Quasi-Static Effects in SiGe HBTs Using an Improved Charge Partitioning Scheme," IEEE
Trans. Electron Devices, vol. 59, Sept. 2012, pp. 2542-2545.
Conferences/Workshops
Noel Augustine, Khamesh Kumar and Anjan Chakravorty, "Applicability of Partition Charge Based
Approach for Modeling Non-Quasi-Static Effects in SiGe HBTs,вЂќ 16th International Workshop on the
Physics of Semiconductor Devices, Kanpur, India, Dec. 2011.
Noel Augustine, Khamesh Kumar, Arkaprava Bhattacharya, Thomas Zimmer and Anjan Chakravorty,
"Efficient Models for Non-Quasi-Static Effects and Correlated Noise In SiGe HBTs," accepted in IEEE
International Conference on Electron Devices and Solid State Circuits 2012.
About me :
I obtained the B. Tech degree in Electronics and Communication Engineering from College of Engineering,
Chengannur, Kerala. I am presently working toward the M. S degree in the Department of Electrical Engineering,
IIT Madras, Chennai. My research interests include semiconductor device physics and modeling of semiconductor
devices.
Education :
B. Tech Electronics and Communication Engineering, 2005 - 2009, College of Engineering, Chengannur,
Kerala
M. S Microelectronics and VLSI, July 2010 - present, IIT Madras
E-mail id : noelaugustine@gmail.com
Pratyush Sahay
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. A.N.Rajagopalan
Title of thesis : Geometric and Photometric Reconstruction of Large Missing Regions in 3D models
Thesis abstract : Generation of digital 3D models of real world structures is a popular theme in computer vision,
graphics and virtual reality. In general, post-processing of the acquired or generated point clouds is warranted to
generate вЂ�watertightвЂ™ 3D models. However, there may naturally exist structures that show large damaged or
broken regions (e.g.: archaeological structures) due to numerous enviromental and man-made forces of
degradation at work. Using traditional post processing methods, the вЂ�watertightвЂ™ 3D model generated will also
contain such a damaged region, which may result in visually unpleasant outputs for applications such as a
вЂ�Virtual TourвЂ™. In this work, filling-up of such naturally existing damaged regions (or, holes) in 3D models is
addressed. Once a salient geometric reconstruction of the holes in a broken 3D model has been achieved, an
intensity filling-in (or, inpainting) for the reconstructed surface points is the next objective. This part of the work
aims to perform inpainting of the per-colour channel brightness information over the 3D geometry itself for the
hole-filled region which helps in making the inpainting process view independant. As a direct result of this, even
the reconstructed surface points occluded in a given view can be intensity inpainted.
Skills :
Programming Languages: C, C++, Bash, Python, MATLAB / Scilab / Octave
Libraries & Tools : OpenCV, CUDA, Clutter, MeshLab
Research interests :
3D reconstruction techniques
Geometry in Computer Vision
Image Processing
Areas of interest : Computer Vision, Image Processing Algorithms
Publications/Conferences :
Pratyush Sahay and A. N. Rajagopalan, вЂњHarnessing self-similarity for reconstruction of large missing
regions in 3D models,вЂќ in IEEE International Conference on Pattern Recognition, Tsukuba Science City,
Japan, Nov 2012
Education :
MS by Research, 2010 - 2013, IIT Madras
B.E (Electronics and Communication), 2006 - 2010, Manipal University
XII, DPS Vasant Kunj, 2005, New Delhi
X, Don Bosco Academy, 2003, Patna
E-mail id : ee10s053@ee.iitm.ac.in
Projesh Basu
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Harishankar Ramachandran
Title of thesis : Spectral Analysis of Non-Ideal Plasma in Waveguides and Designing such Waveguides
Thesis abstract : We generated plasma in a rectangular waveguide at different voltages and different flow rates
of gases. The motive was to test the characteristics and the line spectra of soil. The temperature of the plasma
was calculated using comparison with blackbody radiation and that was used to chracterise the nature of the
plasma. The conductivity profile of the plasma was then used for the 3D Modelling of our experiment. A relevant
circular waveguide was used for the same experiment as it is easier to design and it also reduces the cost of the
experiment . For the spectral analysis of the plasma, a UV-Visible spectrometer which gives a resolution of 1nm
to 3 nm lines is also designed.This is what is required for a soil analysis and that is also the reason why a low cost
design is even possible.
Skills :
C
Matlab,Scilab
Python
Ubuntu
Latex
MS office
Research interests :
RF and Microwave Engineering
Computational Electromagnetics
Plasma Physics
Optical Engineering
Areas of interest : RF and Microwave Engineering, Computational Electromagnetics
About me :
I am a fun-loving guy who takes interest in different aspects of life. Doing research in IIT Madras was a great
learning experience for me.
Education :
MS(by Research) IIT Madras, 2009-2012
BTech, JIS College of Engineering, 2004-2008
E-mail id : projeshbasu@gmail.com
Sakthivel P
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Prof.Nadita Dasgupta and Dr.Bijoy Krishna Das
Title of thesis : SIMULATION AND EXPERIMENTAL STUDIES OF DIFFUSION DOPED P-I-N STRUCTURES
FOR SILICON PHOTONICS
Thesis abstract : Designed, simulated, fabricated and characterized the integrated optical / optoelectronic
devices viz., p-i-n optical phase and intensity modulators, Variable Optical Attenuators (VOA) and 3-dB
optical power splitters on SOI platform by using CMOS fabrication facility available at microelectronics lab,
Department of Electrical engineering, IITM. The above mentioned devices are the building blocks for high speed
optical communications and signal processing in integrated digital photonic circuits and electronic circuits (
PICs/ICs )
Skills :
Singing Songs
Servicing Electronic Equipments
Research interests :
VLSI and Digital IC Design
Photonics Device Design
VLSI Technology
Areas of interest : VlSI design and technology, Silicon Photonics
Publications/Conferences :
P.Sakthivel, N.Dasgupta and B.K Das "Simulation and Experimental Studies of Diffusion Doped p-i-n Structures
for Silicon PhotonicsвЂќ for Oral presentation to be presented 6 February 2013. This conference is part of
SPIE OPTO which will be held 2nd February 2013 to 7th February 2013 in San Francisco, California USA, and
will be published in SPIE proceedings.
About me :
Very interested in knowing the secrets of nature.
Love on research and teaching
Like musics
Education :
MS ( Microelectronics ) 2009-2013, Indian Institute of Technology Madras, Chennai.
M.Sc. ( Physics & Electronics) 2008 Vivekananda College, Mylapore, Chennai.
B.Sc.( Physics ) 1996-1999 Government Arts College Thiruvannamalai.
E-mail id : sakthivelpm77@gmail.com
Sandeep Kumar Singh
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. R. Manivasakan
Title of thesis : Design of Virtual Optical Bus Networks
Thesis abstract : VOB is a new concept that establishes the optical bus network with the intent of minimizing
packet collision in the network. Flows are grouped together into a set of VOBs. A co-ordination is established
among flows so that intra-VOB packet collision is completely suppressed and inter-VOB packet collision is
minimized.
Skills :
C, Matlab, VHDL, Omnet++
Integer linear Programming
Electronic Circuit Design
Research interests :
Virtual Optical Bus Networks
Optimization Problems
Areas of interest : Networks, Optical Access Networks, Cloud Computing
Publications/Conferences :
Rostami, A.; Singh, S.K., "Design of virtual optical bus networks: A heuristic approach," Networks and Optical
Communications (NOC), 2012 17th Europian Conference.
About me :
I want to build a research oriented career where I can utilize and enhance my knowledge of the field of
communication Networks.
Education :
B.Tech Electronic and communication Engineering, 2006-2010, SASTRA University , Tanjavur, Tamilnadu
E-mail id : sansastra@gmail.com
Sheik Mohammed Ali S
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Boby George
Title of thesis : Design and Development of a Novel Inductive Loop Sensor System
Thesis abstract : This project presents a novel inductive loop sensor which can detect vehicles under a
heterogeneous and less-lane disciplined traffic and thus can be used to support a traffic control management
system in optimizing the best use of existing roads. The loop sensor proposed in this report detects large (e.g.,
bus) as well as small (e.g., bicycle) vehicles occupying any available space in the roadway, which is the main
requirement for sensing heterogeneous and lane-less traffic. To accomplish the sensing of large as well as small
vehicles, a multiple loop system with a new inductive loop sensor structure is proposed. The proposed sensor
structure not only senses and segregates the vehicle type as bicycle, motor cycle, scooter, car and bus but also
enables accurate counting of the number of vehicles even in a mixed traffic flow condition. A prototype of the
multiple loop sensing system has been developed and tested. Field tests indicate that the prototype successfully
detected all types of vehicles and counted, correctly, the number of each type of vehicles. Thus the suitability of
the proposed sensor system for any type of traffic has been established. This project also presents a new pattern
of multiple loops that improves reliability. Output data from this system has been processed using a machine
learning algorithm to automate the classification process.
Skills :
Programming / Scripting
Partial Element Analysis
Circuit Simulation
: Matlab, C, C++
: Comsol, Magnet
: Pspice, Multisim, Simulink, Tina-ti
Research interests :
Sensors and Transducers
Virtual Instrumentation
Mechatronic System Design
Machine Learning Systems
Intelligent Transportation Systems.
Areas of interest : System Design and Development
Publications/Conferences :
S. S. M. Ali, George B., Vanajakshi L and Jayashankar V., вЂњA Multiple Inductive Loop Vehicle Detection
System for Heterogeneous and Lane-Less TrafficвЂќ, IEEE Tranransaction. on Instrumentation and
Measeasurement, vol. 61, no. 5, pp. 1353-1360, May 2012.
About me :
Interested in a progressive career that will facilitate to apply my potential, creativity and technical knowledge.
Education :
Indian Institute of Technology Madras, India
Master of Science, Sensors and Instrumentation for Intelligent Transportation System
July 2011 вЂ“ July 2013
Anna University, India
Bachelor, Electronics and Communication Engineering
E-mail id : ssmali.iitm@gmail.com
Jun 2005 - Apr 2009
Sneha Sanjeevini
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Bharath Bhikkaji
Title of thesis : Stability Analysis of Switched Systems with "mixed" small gain and passivity property
Thesis abstract : This paper deals with the stability of switched systems and their feedback interconnections.
Each of the subsystems of the total switched system possesses "mixed" small gain and passivity property, i.e, the
system has small gain as well as passivity property. A linear feedback system is said to possess вЂњmixedвЂќ property
if its loop gain is less than unity in certain frequency intervals while being passive in the rest. An equivalent
definition of this property in time domain is given for both linear and nonlinear systems. It has been proved that a
system with the mixed property is dissipative and there exists a storage function such that the dissipativity
inequality is satisfied. A definition of dissipativity for switched systems is described, where each subsystem is
assumed to have independent storage function. Using this definition, it is shown that a switched system with the
mixed property is stable under certain conditions. Also, the negative feedback interconnection of two switched
systems is dissipative and hence stable.
Skills :
Worked in MATLAB, LABVIEW
programming languages - C++, VHDL
Research interests :
Controls Theory
Optimization
Estimation
Applied mathematics
Areas of interest : control system, Controller design, Convex optimization, Applied Mathematics, Mathematical
Modeling, Optimal Control, Nonlinear control system
Publications/Conferences :
Sneha Sanjeevini, Arya Sree. T, Shayama Subair, and Binu. L.S, "Adaptive Control of Uncertain Nonlinear
Systems using CMAC", Proceedings of National Conference on Mathematics of Soft Computing, National Institute
of Technology Calicut, 2012.
About me :
My work interests are mainly in research, design and development in control system theory, related applications
and algorithm development. I like to learn new things and explore different applications. Good communication
skills, organization capability and teaching ability are my strengths.
My hobbies are music and reading books.
Education :
B.Tech Electronics and Instrumentation, 2007-2011, College of Engineering Trivandrum
E-mail id : onlysanjeevini@gmail.com
Sumantra Chaudhuri
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : HARISHANKAR RAMACHANDRAN
Title of thesis : Effects of RF Wave Induced Electric Field On Blood Proteins
Thesis abstract : The goal of my MS is to investigate the formation of the screening potential around charged
molecules in biological tissue. Of interest is the time scale on which this potential is formed, and the nature of this
potential when RF at higher frequency that the inverse time of formation is applied to such molecules. The
motivation for this study is to understand mechanisms by which Electromagnetic Waves from a mobile handset
could affect biological tissue. Biological cell membranes are selectively permeable which means that they allow
only certain molecules to pass through them. One observation in these studies has been that in the presence of
RF, the selective permeability of cell membranes does not function correctly. Specifically some studies have seen
traces of albumin in the brain, which could only be due to the malfunctioning of the blood brain barrier. Before
going to the level of analyzing the movement of proteins through such membranes it becomes necessary to know
their behavior in the main solvent of the human body i.e. blood. Under normal circumstances RF fields should not
have any physiological effect.However, albumin(main blood protein) has a charged sheath around it to shield this
charge. Should it change in size, for example, the diffusive rates could change. This can be a potential cause of
leakage of albumin across blood-brain-barrier.Thus it becomes necessary to understand the behavior of this
Debye shield in presence of RF signal. In my project it will be demonstrated how an RF signal affects the sheath.
Skills :
MATLAB, Scilab, Python, C
LyX, MS Word
Research interests :
Computational Electromagnetics
RF Design
Modeling and Simulation
Areas of interest : Computational Electromagnetics, RF Design
Publications/Conferences :
None till now but I plan to send a report of my work for a journal publication soon.
About me :
My primary area of interest is RF designing. Other than that I am keen to work for an institution which is involved
in the manufacture of scientific softwares and simulation tools.
Education :
B.E. Electronics and Communication Engineering, 2005-2009, VTU, Belgaum , Karnataka
M.S. Electrical Engineering
E-mail id : sumantra61@gmail.com
Syam T P
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Bharath Bhikkaji
Title of thesis : State observer design for battery management system of Lithium ion cells for hybrid electric
vehicle applications
Thesis abstract : To develop algorithm for a battery management system (BMS) which can 1. Accurately
estimating capacity and health of Lithium ion battery 2. Control Charging / discharging more efficiently and safely.
The internal dynamics of lithium ion battery is characterised by a set of Partial and ordinary differential
equations.These equations forms an electrochemical model of the battery. These equations can be numerically
solved for estimating centain internal state variables of the cell. A state observer has to be developed for this
purpose. By knowing these states, the battery can be charged more safely and efficiently than the conventional
voltage based charge/discharge control method. Accurate value of State of charge and state of health of the
battery can also be calculated from the state measurements.
The challenge is to find out an alogorithm which
can perform in real time without compromising on accuracy of state estimations.Such high performance algorithm
can be useful for BMS used in hybrid electric vehicles.
Skills :
Working knoledge in COMSOL multiphysics
Worked in MATLAB and LABVIEW
Programming language : Embedded C
Research interests :
State estimation and control of systems
Battery management systems
Model based control of complex physical systems
Areas of interest : control system, Instrumentation, Battery management systems
Publications/Conferences :
NA
About me :
A person with interests ranging from evoltionary biology to game theory to cosmology to quantum physics. I
like to cook, I like to swim, I like to draw and paint and I wish to lay my hands on many more things I havent tried
yet. Being a scientist was always my dream, no matter in which field. Now it stands as a partly fulfilled one. After
coming into engineering, Control system became dearest of all subjects as I was fascinated to see a feedback
mechanism playing at every corner along all the known areas of science - from economics to biology. For me it is
like a portal to travel everywhere and taste everything in science. Hence I decided to wander around in control
engineering.
My goal is to work in any area in control system where I can do extensive research. I always like to extend
my boundaries while doing any kind of job. As Maria Sharapova once said: " I hit a ball for a living, but I have
that passion to keep learning ".
Education :
B.Tech Electronics and Communication, 2004 - 2008, Govt. Model Enginering College, Cochin, Kerala
E-mail id : syamtp@gmail.com
Tumbali S S K Chaitanya
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. S Krishna
Title of thesis : Discrete Control of Excitation System for Transient Stability Improvement
Thesis abstract : Transient stability is the ability of a system to maintain synchronism when subjected to a large
disturbance. Maintaining transient stability is important because any incidence of a fault may lead to generator
tripping due to loss of synchronism. Since cascaded tripping of generators leads to black out, there is a need to
improve the transient stability of the system. This can be achieved by proper system design and use of control
action. I was involved in developing a control algorithm based on the concept of equal area criteria and
implemented the same on the multimachine system with braking resistor in which generator is modelled in detail. I
have used the concept of wide area measurement in designing the algorithm and have taken communication
delay into consideration. I have been trying to decide the rating of braking resistor based on the energy function
and sensitivity. Also, I have been trying to implement the same control algorithm on excitation systems.
Skills :
Simulation Tools
: MATLAB, GNU-Octave, Simulink, LabVIEW, Scilab
Programming Languages : C, C++
Operating Systems
: Linux, Windows, Mac OS X
Packages
: Libre Office, MS Office, LaTeX
Research interests :
Power system stability
FACTS, HVDC
Areas of interest : POWER SYSTEMS. CONTROL SYSTEMS
About me :
Confident go-getter.
Ability to keep myself abreast with changing technology and thereby grasp new things and acquire
requisite skill set quickly.
Self motivated
A keen team player with ability to work in a team and individually.
Aspiring to achieve position in an organization, which encourages learning and creativity that provides
exposure to new ideas and that stimulates personal and professional growth.
Education :
Pursuing M.S in Electrical Engineering, 2011(Jan)-2013, IIT Madras
B.Tech in Electrical and Electronics Engineering, 2006-2010, St Martin's Engineering College (JNTU-H)
E-mail id : chaitanya.tssk@gmail.com
V Thangamani
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. A. N. Rajagopalan
Title of thesis : Restoration of foggy motion blurred images
Thesis abstract : Bad weather like fog or mist leads to a contrast-loss in the captured image. This degradation is
a function of the scene depth. Simple histogram based equalization methods will not handle such space-variant
degradations. Hand-held cameras are prone to shake and hence the final image is also motion blurred. We have
studied the restoration of such foggy motion blurred images.
Skills :
Programming languages: C, Matlab
Operating systems: Linux, Windows, Solaris
Research interests :
Image Processing and Computer Vision
Time series analysis
Statistical estimation and decision theory
Numerical linear algebra
Areas of interest : Image Processing, Computer Vision, Signal Processing, Non linear analysis
Publications/Conferences :
A.S. Sharma, T. Veeramani, "Extreme events and long-range correlations in space weather", Nonlinear
Processes in Geophysics, 18, 719-725, 2011. (Impact factor: 1.658)
A. Surjalal Sharma, Thangamani Veeramani, Jian Chen, and Xi Shao, "Dynamical and Statistical Modeling
ofthe Multiscale Magnetosphere", MODERN CHALLENGES IN NONLINEAR PLASMA PHYSICS: A
Festschrift Honoring the Career of Dennis Papadopoulos. AIP Conference Proceedings, Volume 1320, pp.
72-76 (2011).
S. Sharma, T. Veeramani, "Complexity of the magnetosphere: Dynamical and statistical features from
extensive correlated data", AGU Joint Assembly Meeting, 24-27 May 2009.
Surja Sharma, Jian Chen, Thangamani Veeramani, "Spatio-temporal dynamics of the magnetosphere:
Mutual information function analysis", 49th Annual Meeting of the Division of Plasma Physics, Volume 52,
Number 11, 2007.
Thangamani Veeramani, Surja Sharma, "Multiscale phenomena in the magnetosphere: Power-law and
Weibull distributions", American Physical Society, 48th Annual Meeting of the Division of Plasma Physics,
October 30-November 3, 2006
T. Veeramani, A. Sharma, "Forecasting geomagnetic activity using Kalman filters", AGU Joint Assembly
Meeting, 23-26 May 2006.
About me :
Hometown: Mettupalayam, Tamilnadu
Mothertongue: Tamil
Education :
M.S (by research), Department of Electrical Engineering, IIT Madras (Aug 2010 - present)
B.E, Electronics and Communication, College of Engineering, Guindy (CGPA - 9.35/10)
12th standard, Maths, Physics, Chemistry and Biology, SIV Matriculation School, Sirumugai (95.08%)
10th standard, San Jose Matric School , Mettupalayam (90.45%)
E-mail id : thangamani@smail.iitm.ac.in
Vaibhav Pratap Singh
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Anil Prabhakar
Title of thesis : Sensor Networks
Thesis abstract : Wireless Sensor Networks- Increasing CO2 concentration in atmosphere is one of the major
cause of global warming. increased soil respiration in recent years is considered a major source. Suggested
sources for increase in soil respiration are microbes (due to increase in temperature) and plant roots. The need is
to come up with a hardware which can do soil and atmospheric CO2 measurement with low power consumption
and transmit the data over wireless to a personal computer (PC). We are in the process of designing such a
system. Optical Sensor Networks- India Based Neutrino Observatory (INO) has about 30,000 neutrino detector
each generating data at about 500 kbps. A robust network is required to collect data from all the nodes accurately.
Keeping in mind the EMI due to high voltage surroundings, optical fiber network looks a suitable option. We are in
process of designing a passive optical network according to the need at INO.
Research interests :
Wireless Sensor Networks.
Optical Sensor Networks.
Passive Optical Networks.
Education :
B.Tech Electronics and Communication Engineering, 2007-2011, Dehradun Institute of Technology, Dehradun
E-mail id : vaibhavpratapsingh07@gmail.com
Vesalapu Gowri Suresh
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Shanti Bhattacharya, Dr. Nandita Dasgupta
Title of thesis : Tunable MEMS Diffraction Gratings
Thesis abstract : MEMS diffraction gratings whose period can be tuned during operation find applications in
micro-spectrometers, optical switches and in display devices. Tunable MEMS diffraction grating with out-of-plane
actuation of the fixed-fixed beams is designed. The effect of the non-planar bending of the fixed-fixed beams on
the diffraction efficiency during actuation is investigated for 633nm wavelength. A new beam structure and
actuation mechanism has been proposed to improve the displacement profile of the beams used in the grating.
Skills :
Programming languages : C, MATLAB, Verilog, VHDL
OPerating Systems : Windows, LINUX
Simulation Tools : Intellisuite, Eldo SPICE
Research interests :
Computational Lithography
MEMS modelling and fabrication
Areas of interest : Digital circuit design and verification, Computational Lithography, Semiconductor device
fabrication and characterization
Publications/Conferences :
V.Gowri Suresh, Nandita Dasgupta and Shanti Bhattacharya, "Tunable MEMS Diffraction Gratings",
IWPSD 2011, December 2011, IIT Kanpur.
V.Gowri Suresh, Shanti Bhattacharya and Nandita Dasgupta, "Tunable MEMS Diffraction Gratings with
improved Displacement Profile of the fixed-fixed Beams", to be presented at MOEMS and MEMS
conference, SPIE Photonics West, Sanfransico, USA.
About me :
Working in the area of optical MEMS.
Can handle semiconductor fabrication and characterization tools.
Good knowledge of Digital VLSI.
Education :
B.Tech(Electronics and Communication), 2006-2010, MVGR College of Engineering, JNTU Kakinada.
E-mail id : 3vgsuresh1@gmail.com
Yashwant K
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Prof. K.Shanti Swarup
Title of thesis : Process bus in Substation Automation Systems based on IEC 61850
Thesis abstract : IEC 61850 is a standard for the design of electrical Substation Automation Systems (SAS). It
defines the communication between Intelligent Electronic Devices (IEDS, like multifunctional relays) in the
substation and the related system requirements. The GOOSE messaging, Substation Configuration description
Language (SCL) makes IEC 61850 more reliable, and the bottlenecks faced like the one of interoperability have
been addressed. My work involves studying and analyzing this standard and case studies of the systems which
have been designed and deployed based on this standard across the world. I have been working on applying the
concepts like Process Bus to Bus Bar Protection. Also, I got myself acquainted with Object Oriented design
methodology based on which the data and object models for such systems are constructed.
Skills :
Simulation Tools : GNU-Octave, Matlab, Scilab
Programming Languages : C, C++, Python
Platforms : GNU/Linux
Research interests :
Power System Automation
Communication and Computer Networks in a Smart Grid
Areas of interest : POWER SYSTEMS
Publications/Conferences :
Yashwant K & Swarup K S; вЂњModeling an IEC61850 Based Substation Automation SystemвЂќ; Annual
IEEE India Conference (INDICON), Hyderabad, 16th - 18th December 2011
About me :
A quick learner with good analytical skills.
An enthusiastic person with a strong social commitment.
Education :
Pursuing MS (by Research) in Electrical Engineering, 2010 - 2013, IIT Madras, Chennai
B. Tech. in Electrical and Electronics Engineering, 2006 - 2010, St. MartinвЂ™s Engineering College,
Hyderabad
E-mail id : yashwant787@gmail.com
Yusuf Panbiharwala
Master of Science by Research (MS)
Department of Electrical Engineering
Guide : Dr. Balaji Srinivasan
Title of thesis : Investigation of power scaling issues in pulsed fiber lasers
Thesis abstract : High power pulsed fiber laser can be generated using a master oscillator power amplifier
(MOPA) configuration. The aim of the research work was to generate laser at 1064nm with kilo-Watt level of peak
power for nano-second pulses with kilo-Hertz repetition rate which can be useful for many applications. Ytterbium
doped double clad fiber was used as a gain fiber in MOPA configuration of amplify input power of hundreds of milliWatt which is obtained from a semiconductor laser diode to hundreds of Watts. A second stage of amplifier was
used which consists of an Ytterbium doped large mode area double clad fiber, to achieve output power of kilo-watt
level. Numerical simulations were performed by solving differential equations in Matlab, for optimizing the
complete design of the amplifier system. Study of mode area reduction in a large mode area double clad fiber due
to coiling was done. Study of self-pulsing phenomenon, which occurs as a limitation for amplification of pulsed
input in MOPA configuration.
Skills :
Programming languages: C, C++.
Tools: Matlab, Python
Experimental: Optical fibers, semiconductor laser diodes, passive optical components, fiber bragg grating
fabrication, optical fiber splicing.
Research interests :
High Power fiber Lasers,
Q-switch Lasers
Areas of interest : High Power fiber Lasers, Q-switch Lasers
Publications/Conferences :
Yusuf Paniharwala, C.Sathish Kumar, Deepa Venkitesh, Balaji Srinivasan, вЂњInvestigation of self pulsing in
Ytterbium doped fiber amplifierвЂќ, selected for publication in Photonics 2012 conference,IIT Madras.
Education :
M.S. (Research) Electrical Engineering, 2011-2013, IIT Madras.
B.E. Electronics and communication, 2006-2010, Acropolis Institute of Technology and Research, Indore
E-mail id : yusufpanbiharwala@gmail.com
Department of Management Studies
Aruna B
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Dr.M.P.Ganesh and Dr.R.Madhumathi
Title of thesis : Aligning field officers' motivation to attain social efficiency in the context of microfinance
Thesis abstract : Objective of my study is to understand the concept of вЂ�Social EfficiencyвЂ™ in the context of
Indian Microfinance and the role played by the field officers of a Microfinance Institution to achieve the same.
Drawing from the rich research literature on important organizational aspects such as Business Ethics,
Organizational Citizenship Behaviors, Organizational Loyalty and Compliance, a variable is conceptualized in the
present study and it is referred to as 'Intention to engage in Social Performance'. On the basis of the dominant
themes reflected while reviewing the research literature, the different research dimensions are identified. The
variable 'Intention to engage in Social Performance' is the fundamental concept which forms the heart of this
study and its relation with the individual level performance ratings (awarded by the supervisors) as well as the
organizational
level social efficiency is determined in this study. A thorough investigation of
possible organizational antecedents that shape up a field officerвЂ™s intention to engage in Social Performance is
carried out with the help of an established employee motivational approach known in literature asвЂ�Social
Information Processing ApproachвЂ™.
Skills :
SPSS, Amos, Multivariate statistics, Data envelopment Analysis
Research interests :
Microfinance, Social performance, Encouraging Field officers to Work towards Social Goals, reaching Social
Efficiency at the Field officer level as well as at the Organizational level.
Areas of interest : Organizational Behavior and Human resource management
Publications/Conferences :
Aruna B, Dr. M.P. Ganesh and Dr.R. Madhumathi (2012) вЂњAligning field officersвЂ™ motivation to the social
mission of microfinanceвЂќ, Cost Management Journal (Publisher: Thomson Reuters) Accepted in press.To be
published in the forthcoming issue March, 2013.
Aruna B, Dr. M.P.Ganesh and Dr.R.madhumathi Understanding field officer's intention to engage in social
performance in the Indian Microfinance context.XXI Annual convention of NAOP, IRMA, Gujarat- India, December
13-17, 2011.
Aruna B, Dr. M.P.Ganesh and Dr.R.madhumathi Application of Social information Processing Approach in the
context of Microfinance..Third international conference on institutional and technological environment for
Microfinance, January 3-7, 2012.
Education :
BSc Psychology, Prajyoti Niketan college, Pudukkad, Thrissur.
MA Applied Psychology, University of Kerala, Trivandrum.
E-mail id : arunabala20@gmail.com
Josephine N. Gemson
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Dr. Thillai Rajan A.
Title of thesis : Risk Management in Private Equity Investments: Evidence from the Infrastructure sector
Thesis abstract : Key Words - Private Equity, Infrastructure Deals, Syndication, Staging, Strategy, Investments,
Risk and Uncertainty, Information Asymmetry, PE firm characteristics, Infrastructure company characteristics,
Deal characteristics, Country risk characteristics Purpose - This dissertation presents an analysis of the choice
for, drivers of and exent of syndication and staging when Private Equity (PE) invest in infrastructure projects. Both
syndication and staging of investments have been recognised as non-monetary tools used by PE investors to
mitigate uncertainty and information asymmetry in difficult enviroments. Previous studies with respect to
syndication or staging have been limited to developed countries; with few studies synthesizing the overall findings
of research to support investment decisions at a sector level. Infrastructure projects have long maturities (5-40
yrs) and resource flows into the project only after they become operational, risk characteristics which are different
from manufacturing / corporate finance projects. With PEs increasing their scale of investing in infrastructure, an
examination of syndication / staging would shed insights into strategies used by PE firms when investing in such
non conventional projects. Objective / Design / Methodology / Approach - The main objective of this dissertation is
to examine syndication and staging strategies of PE firms and the relationship between these two strategies when
PEs invest in infrastructure. This is achieved by three sets of studies - one, that analyses syndication of PE
investments, two, that examines the staging of PE investments and three, that explores the relationship between
syndication and staging of PE investments. This thesis uses secondary data analysis; and the empirical analysis
uses a multi methodology approach to test the various objectives at hand. Scope of infrastructure projects
includes global industrial / energy deals, transport deals and water and utilities deals from 1990 - 2009.
Skills :
Econometric and Quantitative Analysis
Technical proficiency in Windows based systems, MS Office Applications (Word, Excel, Visio, Powerpoint)
Technical proficiency in SPSS, Stata, eViews, Bloomberg, AMOS; Knowledge of ARENA
Excellent communication and interpersonal skills
Research interests :
Private Equity
Infrastructure Finance
Real Options
Areas of interest : Infrastructure and Project Finance, Private Equity, Real Options, Business Intelligence and
Analytics, Financial Analysis and Valuation, Quantitative and Qualitative Analysis, Data Modeling, Interpretation
and Presentation, Project Transition and Development, Project and Team Management
Publications/Conferences :
Gemson, J., K.V. Gautami, and A. Thillairajan, (2012), Impact of private equity investments in
infrastructure projects. Utilities Policy, 21, 59 - 65.
Gemson, J. and A. Thillairajan, вЂњInfrastructure Finance: A Comparative Analysis of Projects with and
without Private Equity FundingвЂќ, 24th Australasian Finance and Banking Conference, Sydney, Australia,
December 14-17, 2011.
Thillairajan A. and J. Gemson, (2011), Financial Closure of Bengaluru International Airport Limited,
Emerald Emerging Markets Case Studies Collection, 2011
Thillairajan A., M. Doshi and J. Gemson, India Venture Capital and Private Equity Report 2011 вЂ“ Private
Equity in Real Estate and Infrastructure - co-authored Infrastructure section. Report was released at IITM
on 15 Nov, 2011
About me :
Finance graduate from University of Strathclyde, Glasgow, currently pursuing Phd at Department of Management
Studies, Indian Institute of Technology Madras. Worked at Zenta as a Process Lead of Commercial Mortgage
Backed Securities and at HCL Capital Market Services primarily in Debt Securities Operations.
Education :
MSc. (Finance), 2002 - 2003, University of Strathclyde, Glasgow, UK
B.Com, 1999 - 2002, Bishop Cotton Women's Christian College, Bangalore, India
E-mail id : josephine4685@yahoo.com
Medha Satish Kumar
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : T J Kamalanabhan
Title of thesis : Intra-Individual and Inter-Individual factors affecting expatriate intercultural development and
engagement
Thesis abstract : Organizations actively focus to prepare their managers to function effectively in a
global workplace; they are constantly seeking better direction for effectively building skills. Off- the-shelf programs
and learning about national culture, though important, are insufficient in equipping the managers in the much
needed aspect of building intercultural competencies. This study investigates intra-individual and inter-individual
factors that have an influence on the intercultural development and engagement of international workers. The
evidence for the specific factors such as emotional intelligence, openness to experience, cosmopolitanism, trust
as well as ratings of social support, perception or out-group and frequency of interaction were gathered from 461
international employees using a survey. Results obtained using SEM model, throws new light on some aspects of
intercultural development. Cosmopolitanism, a previously unexplored concept in this area, emerges to the
forefront. Hypothesized relationship of intercultural development with emotional intelligence, social support and
frequency of interaction show contrasting results. A comparative analysis of Indian and non-Indian respondents
highlight a need for tailor-made programs to prepare managers for working in a global context. This study has
implications for selection, training and development, career management and diversity management.
Skills :
Multivariate statistics and SPSS package and AMOS
Research interests :
Organizational Behaviour
Cross cultural management
Intercultural development and
Expatriate engagement
Areas of interest : Playing music (Guitar and Violin), Painting, reading
Publications/Conferences :
Kumar, M.S. and Kamalanabhan, T.J., "A study on the factors affecting studentвЂ™s intercultural development and
its effect on student engagement", "Indian Association of Applied Psychology", June, 2012
About me :
My name is Medha Satish Kumar, I am a PhD scholar at IITM. I am specializing in the area of cross cultural
management and expatriate engagement. I am interested in understanding and enriching human work life and I
have been interested in cultural aspect of work. I am also interested in taking up an academic career and have
had several opportunities to share my learnings with students. I am enthusiastic, driven and creative.
Education :
B.A. Psychology, Economics and Sociology, 2003 - 2006, Christ College, Bangalore
M.SC. Aplied Psychology, 2006 - 2008, Women's Christian College, Chennai
E-mail id : medhaskumar@gmail.com
P.kalpana
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Dr.Arshinder Kaur
Title of thesis : Split ordering decisions in single period supply chain with contracts and information updating
Thesis abstract : The lifecycle of a product has become short due to the innovation in technology, and these
products have the attributes of seasonality and perishability. The challenges in integrating the supply chain pose
issues like managing complex structure of supply chain, demand uncertainty and leftover units after the selling
season. Due to these reasons, the supply chain members of such products are facing difficulties in selling their
products and making decisions in order quantities. These issues can be resolved by using variants of the classical
newsboy (single period) model which helps in determining optimal order quantity by managing the trade-off
between the risk of over-stocking and under-stocking. We have introduced the concept of вЂњsplit-orderingвЂќ to
absorb the variability in demand, thereby reducing the expected over-stocking and under-stocking costs.
Coordination mechanisms (supply chain contracts) have been introduced for sharing the risks and rewards among
the supply chain members. Mathematical models have been developed for various scenarios and stochastic
dynamic programming technique is used to solve the models.
Skills :
Programming Skills: VC++,Java
Optimization Software: ILOG CPLEX, LINGO, Mathematica
Simulation Software: ARENA, MATLAB
Others: Weibull++7, MS-Project, Systat,MRP Software, Simulink
Applications:MS Office (MS Word, MS Excel and MS PowerPoint)
Research interests :
Supply chain Management
Operations research
Operations Management
Simulation
Areas of interest : Operations Managemet, Supply chain Management
Publications/Conferences :
Kalpana, P., and Arshinder Kaur, вЂ�Ordering decisions of single period split order supply chain with various
demand distributionsвЂ™, Accepted in the International Journal of Operational Research.
Kalpana, P., and Arshinder Kaur, (2012) вЂ�Single period inventory models with multiple ordering
opportunities: a ReviewвЂ™, International Journal of Logistics and Systems Management, 13(2), pp.209-229.
Kalpana, P., and Arshinder Kaur, (2012) Optimal ordering decisions and revenue sharing in a single
period split order Supply Chain. Technology, Operation Management, 2(2), 61-79.
About me :
I am currently pursuing Ph.D. in Supply Chain Management and submitted my thesis on 6th September 2012 .
Having a sound knowledge of Operations Management and related domains, I would like to take up a career in
Supply Chain Management. My interests include solving supply chain and logistics related issues, linear and non-
linear optimization, mathematical modeling and simulation modeling
Education :
B.E Electrical and Electronics Engineering, 1998-2002, RVSCET Dindigul
M.E Industrial Engineering, 2005-2007, PSG Tech, Coimbatire
E-mail id : kalpana81.s@gmail.com
Preetha Menon
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Vijayaraghavan P
Title of thesis : *Understanding Exchange Offers and Enhancing its Efficacy
Thesis abstract : * An вЂ�Exchange offerвЂ™, is a sales promotion offer (in durables) that takes back a used product
as part payment, in exchange for a new one. The Indian consumerвЂ™s reluctance to retire a product that is still
functional, space constraints to store it while purchasing an upgraded product and a need to gain maximum value,
make exchange offers a popular sales promotion tool. Further, the practice of recovering used products lends it to
be refurbished, remanufactured or recycled in an environmental friendly manner. This research seeks an
explanation for the rise of this phenomenon in various theories like the Prospect theory and the Subjective Theory
of Value. Further, my study traces the relevance of an exchange offer to its stakeholders viz. the firm, the retailer
and the customer. It also reveals the current trends that make up an exchange offer advertisement. This study will
then, demonstrate ways of making the exchange offer advertisement more effective. This research contributes to
academic literature by providing a better understanding of exchange offers. Marketing practitioners stand to
benefit from the demonstration of new applications in message framing that improve the efficacy of exchange
offers.
Research interests :
*Price Promtions, Exchange offers and persuasive communication, Sales Promotion Strategies.Under
Areas of interest : Marketing Strategy, Consumer behaviour in sales promotion, persuasive communication,
price promotions and exchange offers
E-mail id : preethamenon.preetha@gmail.com
Ture Rameshwar Shivadas
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Dr. M.P. Ganesh
Title of thesis : Understanding pro-environmental behaviours: how individual characteristics or organization
practices influence it?
Thesis abstract : Environmnetal problems are becoming centre of discussion of all. The solution to this problem
can be technical, social as well as behavioural. In this research are trying to understand behavioural apsect of
sustainability. This study will examine how pro-environmental behaviours in business organizations are affected
by individual characteristics and organizational environmental efforts.
Skills :
Multivariate data analysis
Proficiency in SPSS and AMOS
Research interests :
Pro-environmental behaviours in business organizations
Sustainable behaviours
environmnetal psychology
Organization climate
International Conferences
Geevarghese, R.S. Ture, and S. Manivel The effect of age and length of service on employees'
organizational identification and intention to stay. Conference on Global Strategies for an Emergent India,
Kozhikode, 27-28 Secember 2012 (Accepted)
Ture, R.S. and M.P. Ganesh Understanding employee eco-actions: Interviews with managers. XXII
Annual Convention of National Academy of Psychology, Bangalore, 10-12 December 2012 (Accepted)
Ture, R.S. and M.P. Ganesh Effect of health consciousness and material values on environmental belief
and pro-environmental behaviours. 2nd International Conference on Strategy Management and
Research, Singapur, July 23-24, 2012.
Ture, R.S., R.K. Pradhan, and Geevarghese Effect of organizational climate on organizational
effectiveness. 47th National and 16th International conference of Indian Academy of Applied Psychology,
Cochin, June 15-17, 2012.
Ture, R.S. and M.P. Ganesh Individual and organizational drivers of employee eco-actions: A conceptual
framework. Athenaeum 2012, VI International Conference on Management Research, Tiruchirapalli,
February 11-12, 2012. (Won Special Prize)
National Journal Paper
Ture, R.S. and M.P. Ganesh (2012) Individual and organizational drivers of employee eco-actions: A
conceptual framework. The Journal-Contemporary Management Research. Special Issue, 38-47.
Education :
M.Tech. in Human Resources Development and Management, June 2009
IIT Kharagpur
Graduate in Aeronautical Engineering (A.M.Ae.S.I.), June 2007
The Aeronautical Society of India, New Delhi
E-mail id : rameshwarture@yahoo.co.in
Vijayalakshmi.r
Doctor of Philosophy (PhD)
Department of Management Studies
Guide : Prof.Dr.T.T.Narendran
Title of thesis : A Study of Business Model Innovation in the India- A case of the Pharmaceutical Industry
Thesis abstract : An industry that is considered most innovative by the Indian government has been unable to
cope with the onslaught of foreign arrivals in its own native ground. This is chiefly because Indian
Pharmaceutical Industry is unable to produce original compositions and add to their patent corpus. Post 2005,
with changing regulations and legislations, Indian firms have been mandated to introduce original formulations
and pharmaceutical ingredients into the market. The inability to file patents except a few deserving firms, Indian
firms have adopted alternative strategies to combat competiton for survival. The end of process patent regime is
a bad news for the Indian firms. While exporting, alliances and off patented drugs are alternative strategies for
growth they would not be able to confer sustainance and longer lifelines to these firms. Long term survival
strategies may involve looking at the industry challenges through a different lens and suggesting models that
sideline the conventional innovation management adoption and assimilation techniques,. The determinants,
antecedants and types of Innonvation need to viewed differently. The capabilities and competencies of the
industry is examined from the physical, finacial and human side. The systems processes and resources have
been studied. Is Buiness Model Innovation an answer to their long term survival and growth of Indian
Pharmaceuticla Industry? Can business model Innovation give a turn around to the way Indian Pharma firms are
operating? Can Business Model Innovation boost competiton in the Indian market among the domestic firms and
also challenge the profits of MNCs in india? An attempt is made to develop a partial working model for the
industry.
Skills :
Indepth thinking, Analysis and classification, Root cause analysis, Short and long term solution to problems.
New Business Model Development and creative solutions
Innovative Solutions on Management Issues
Good application software Skills
Team management
Research interests :
Innovation Management and Sustainability
Intellectual Property Rights
Corporate strategy, Core Competencies of Companies and Survival Strategies of Companies
Public Policy, and Public Systems
Areas of interest : Innovation Management, Sustainability, Intellectual Property Rights, Corporate Strategy,
Public Policy, Public Systems
Publications/Conferences :
Publication-"The Influence of level of subsidies on the performance of healthcare and education sector in
India"- Vijayalakshmi.r, communicated to Economic and Political weekly, 2012, India
"Colour of Profit is Green"- Environmental Issues in the hotel Industry, Emerging Trends in Business
Innovation and Sustainability - September 2009, School of Business Management , Mohali, Chandigarh,
Punjab.
$ERXWPH
God Fearing and committed to what I do, my being in any organization can give a direction to it. I am confident
and socially pally. I am fond of the work that i take up and hence work itself is as joyous as leisure for me.
I am a double Masters in Education and Management studies. I graduated in Commerce and possess a post
graduate certificate in software applications. An allumunus of IIM-Ahmedabad and IIT-Madras, I have a good
exposure of both the business and technical world. The august company of best minds in the country has helped
me shape and sharpen my personality and work culture to an enviable extent. I have been a class A student
always. My teachers and professors have always appreciated my sincerity and committment with work .
I intend doing my post doctoral fellowship from a school that belongs to the IV league.
Education :
B.Com (Hons)- 1989-1992
Delhi University
PGDCA
1992-1993
Delhi
M.Ed
- 1998
Mumbai University
Masters in Management Studies- 2004- 2006 --Mumbai University
FDP2008
IIM-Ahmedabad
PhD2013
IIT-Madras
E-mail id : vijayalakshmi.r@welingkar.org
B H Kiranmai
Master of Science by Research (MS)
Department of Management Studies
Guide : Dr. V. Vijayalakshmi
Title of thesis : Influence of industry and academic collaborations on innovation capabilities of industry in context
of software and IT companies. A comparative study of the German and Indian Research Eco-systems.
This study aims at understanding how industry and academic collaborations influence
Thesis abstract :
innovative competitiveness of software and IT sector industries. A tech-innovation embodies information and thus
reduces uncertainty about cause-effect relationships in problem solving. While innovation is indicated by patent
counts, new product announcement and other factors, the said innovation is communicated through certain
channels over time among the members of a social system. This is called the diffusion of an innovation.
Universities not only play a vital role in this information generation but also act as a channel through which the
information could be communicated. This study aims to establish how industry and academic collaborations
provide various avenues of improvement with regards to the innovative competitiveness of a company actively
involving itself in the collaboration. For the purpose of this study, a comparative analysis of the research ecosystems which influence innovation in Germany and India, has been conducted with the help of empirical
evidence collected through questionnaire and personal interviews. The variables indicate channels of knowledge
transfer and their significance, barriers to these collaborations and cultural aspects. Though this cannot give an indepth idea on the differences between the two eco-systems, it throws light on the basic differences. Based on the
responses, the common opinion was that, academia can contribute to innovation in terms of knowledge transfer
which can take place through the channels of: human, intellectual and structural capital exchange. The study is
however not devoid of pro-innovation bias and we aim to explore this area in the future.
Skills :
Team Management
Organizational skills
Basic Data Analysis
Life skills and Business Etiquette
MS Office
Research interests :
Strategic Human Resource Management
Innovation management
HR Analytics
Organizational Behavior
Areas of interest : Innovation Management, Strategic Human Resource Management, Innovation clusters, HR
Analytics, Strategic Management, Organizational Behavior
About me :
I did my schooling and Under-graduate studies from Hyderabad. My under-grad was in Textile Engineering. After I
finished my Under-grad, I worked in the Department of Textile Engineering on a Polymer science related Project
for a twelve months. While in college,I and a few other friends felt the need to improve the facilities in our college
by several folds and worked accordingly. During my stay at IIT Delhi, I worked as a part-time Associate HR for a
student start-up called "thewittyshit.com". I observed that working with people was one thing that constantly
excited me. I realized my strength in management and started my Masters in Human Resource and
Organizational Behavior specilization. I performed well and got selected for an Exchange program in "Technical
University of Munich" for the Summer semester from April 2012 to September 2012. As a part of my course work,
I studied Technology and Innovation Management and realized the potential implications of this field in India. I did
a case study as a part of my Master's thesis which aims at understanding how industry and academia
collaborations influence innovation capabilites of an Industry.
I am interested in Reading and Writing.
Education :
B Tech, Textile Engineering, 2006-2010, University college of Technology, Osmania University, Hyderabad
E-mail id : bhamidi89@gmail.com
Deepthi U
Master of Science by Research (MS)
Department of Management Studies
Guide : Dr. Rupashree Baral
Title of thesis : Understanding the generational differences and diversity climate of the organization in state of
psychological contract fulfillment, and its impact on employeeвЂ™s cognitive responses: A conceptual analysis
Thesis abstract : The study of psychological contract is of increasing interest to organizations, practitioners, and
researchers alike and is an important area of inquiry for management research. It is necessary to study the
perceived psychological contract fulfillment, in order to better understand the employer- employee relationship.
Organizations must also recognize the influence of the values and work preferences of employees belonging to
different generations, impact of diversity climate of the organization and its effects on employeeвЂ™s cognitive
responses, in order both to retain staff and to groom future leaders. This paper examines the employeeemployer exchange in terms of perceived psychological contract fulfillment and its effect on employeeвЂ™s
behaviors and attitudes. This paper also aims at studying how employees belonging to different generational
cohorts employed in diverse climate perceive their state of psychological contract and its resulting effect on their
attitudes and behaviors. Based on literature, a conceptual framework is developed to link all the variables which
will be tested in a follow up empirical study. It is proposed that employees belonging to different generations
working in a positive diversity climate will report psychological contract fulfillment which in turn will have significant
impact on work related attitudes and behaviors.
If organizations are able to modify their cultures and work
environments to adequately balance the employer employee relationship, then there is a possibility of
improvement in attitudes and behavior of employees and this in turn lead to better organizational performance.
The findings from the present research would add considerably to the literature and practice on generational
differences, diversity climate and state of psychological contract fulfillment. This research would also contribute to
academic literature given the limited amount of studies in this area in the Indian context.
Skills :
Basic Software Testing concepts
Basics of General Insurance
Life Skills and Business Etiquettes
Defect Tracking
VB 6.0 , HTML, MS Office
Research interests :
Workplace and Workforce Diversity
Areas of interest : Human Resources, Training and Development, Workforce Engagement
About me :
Strong team player with good interpersonal skills
Eager and quick to learn
Strong team working skills and ability to work under pressure. Successfully
completed projects within the time frame and budget constraints
Dynamic, hardworking and goal oriented
Education :
B. Tech Leather Technology, 2006 - 2010, Anna University - Chennai
E-mail id : deepthi.1502@gmail.com
John Mathew
Master of Science by Research (MS)
Department of Management Studies
Guide : Amit R.K
Title of thesis : Topics in the Competitive Newsboy Model
Thesis abstract : In the modern world, a product life cycle is very short because of the innovations in
technology.Supply chain management is about matching supply with the demand, especially with the inventory
management.Too much of supply leads to inventory risk(cost of unsold inventory) whereas too much of demand
leads to supply risk(cost of insufficient supply).A supply chain with a manufacturer selling seasonal products to
two retailers(buyers) working in a common market is considered.The products are substitutable so that, if there is
any unsatisfied demand in one retailer, it will go to the other .The retailers(acting as a newsvendor) need to
determine the optimal order quantity so that they could capture the maximum market.Both the retailers make
demand forecasts independent of each other, and is a private information.Also, they make an assessment about
the forecast of the other retailer knowing his own forecast.The equilibrium of the competition game is to be
determined which will indicate the optimal order quantity of each buyer.Game theoretic concepts are used for
modelling the problem.
Skills :
Optimization software : Mathematica, Cplex, Lingo
Statistical/Analytical Software :SAS, SPSS
Programming Languages :C,C++
Simulation Software: ARENA,MatLab
Applications :MS Office(MS Excel,MS Word, MS Powerpoint,MS Visio)
Other :AutoCAD,Latex
Research interests :
Game Theory
Operations Research
Supply Chain Management
Areas of interest : Operations Management, GAME THEORY, Supply chain Management
About me :
Highly motivated
Hardworking
Team player
Education :
B.Tech Mechanical Engineering, 2005-2009, Mar Athanasius College of Engineering,Kothamangalam
E-mail id : johnelanji@gmail.com
K.vinodh
Master of Science by Research (MS)
Department of Management Studies
Guide : Saji K Mathew
Title of thesis : Web Personalization for Technology Acceptance
Thesis abstract : Web Personalization acts as a moderating effect for the acceptance of Technology domain
Skills :
Software
Research interests :
Web Mining
E Commerce
Distributed Data bases
Areas of interest : Computer Science
Publications/Conferences :
Vinodh Krishnaraju, K.Elayaraja, Dr.M.Saravanan, "Discovering unique members from mobile social networks"
About me :
A software guy interested in coding databases.
Education :
BE, Anna University, 2009
E-mail id : mailforvinodh@gmail.com
S Mahalakshmi
Master of Science by Research (MS)
Department of Management Studies
Guide : Thenmozhi M
Title of thesis : The Effect of Firm Structure on Cash Holdings of Indian Firms
Thesis abstract : For companies to survive in the increasingly competitive scenario with high capital market
imperfections, liquidity management has become a major concern especially during the crisis period and at times
of macroeconomic uncertainty. Companies with sufficient cash on hand may escape the need to rely extensively
on credit provided by banks as well as increasingly costly credit markets. The effect of firmsвЂ™ organizational
structure (i.e., whether a firm is diversified or focused) on cash holdings is examined from an Indian perspective.
The study attempts to investigate and explain the difference in cash holdings level between diversified and
focused firms and also how cash holdings affect firm valuation.
Skills :
Statistical/Analytical software: SPSS, E-Views, STATA
Programming languages : C, C++
Others: Microsoft Office applications
Research interests :
Corporate Liquidity
Mergers and Acquisitions
Firm Valuations
Portfolio Management
Areas of interest : Corporate Finance, Financial Markets, Liquidity Management
Publications/Conferences :
" S. Mahalakshmi, Dr. M. Thenmozhi", "The Effect of Firm Structure on Cash Holdings", COSMAR 2012", "Nov
16-17th".
About me :
I primarily work in Corporate liquidity. I am highly motivated and enjoy learning new things. I work well in groups
and love challenging tasks. I show great enthusiasm and determination in getting things done. I have a great
passion for singing and a big foodie.
Education :
B.E Materials Science and Engineering, 2007-2011, College of Engineering, Guindy (Anna University)
E-mail id : maha0189@gmail.com
Sandeep Menon S
Master of Science by Research (MS)
Department of Management Studies
Guide : Arshinder Kaur
Title of thesis : Strategic Sourcing practices in Indian automobile companies
Thesis abstract : Strategic Sourcing practices in Indian automobile companies
Research interests :
Strategic Sourcing
Supply chain Management
Operations Management
Areas of interest : Strategic Sourcing, Supply chain Management, Operations Management
Education :
B.E Electronics and Communication Engineering, 2005-2009, Thiagarajar College of Engineering, Madurai
E-mail id : sandeeptce@gmail.com
Sowmya Raja
Master of Science by Research (MS)
Department of Management Studies
Guide : Dr. Richa Agrawal
Title of thesis : Consumer Perceived Green Image: Scale Development and Validation
Thesis abstract : "Environment? is not a passing fad anymore. People today, recognize their obligation to be
environmentally responsible and purchase products that are environment friendly and also increasingly expect
companies to behave in an environmentally responsible manner. More and more companies try and project
themselves as environmentally responsible and environment friendly. They communicate the green credentials of
their products, activities, etc. through marketing and promotion. Since companies spend considerable resources
to get a green image, it would be useful for marketers to know how their efforts are being perceived by customers
and/or what their sentiments are towards all such activities. An attempt has been made in the present study вЂ“ 1. to
identify all marketing efforts that are made by companies in order to get a green image. 2. to develop a measure
of customers' perceived green image of the company as a result of these efforts.
Skills :
Programming languages : C, C++
Analytics Software: SPSS
Modeling software : Solidworks
Design software: DESIGN II, HYSIS
Packages: MATLAB
Other: MS Office
Research interests :
Consumer Behaviour
Innovation
Sustainability
New Product Development
Areas of interest : Green Marketing
Publications/Conferences :
Raja, S., and Agrawal, R., "Creating a Green Image: Marketing Efforts and Customer Sentiments", Australia and
New Zealand Marketing Academy Conference, 2012.
About me :
Avid reader, Passionate musician, Volleyball enthusiast
Education :
B.Tech Chemical Engineering, 2005-2009, Vellore Institute of Technology University, Vellore.
E-mail id : sowmya310@gmail.com
Sruthy Sara Mathew
Master of Science by Research (MS)
Department of Management Studies
Guide : Dr. Richa Agrawal
Title of thesis : Loyalty program membership: A study of factors influencing customers' decision
Thesis abstract : At present, companies across various sectors like apparel retail, grocery retail, hotels, airlines
and railways are offering loyalty programs in order to retain customers and encourage loyalty. With increase in the
number of companies offering these programs, customers are making a conscious choice on whether to accept or
not accept the membership of any loyalty program. Given that no effort has been made in the past, an attempt is
being made in the present study to identify all such factors that influence and impact customers' decision to
accept or not accept the membership of a loyalty program. Qualitative study which consisted of in depth
interviews were conducted with individuals who are familiar with and knowledgeable about loyalty programs in
general. Further study is being done to validate the findings of the qualitative study.
Skills :
Excellent communication skills
Good at creative writing
Team player
Research interests :
Loyalty programs
Advertising
Areas of interest : Qualitative research, Marketing, Advertising
Publications/Conferences :
Mathew, S.M., and Agrawal, R., " Loyalty program membership: A study of factors influencing customers'
decision", Academy of Marketing Conference", July 2012
About me :
I am currently doing my MS (By research) in Marketing in the Department of Management Studies. I am
passionate about any task I take up and ensure that I give it my best. I am thankful to God for all the opportunities
that he has given me so far, which has helped me gain ample exposure in the industry, especially in media and
advertising.
Education :
M .A. Public Relations, 2005-2007, M.O.P Vaishnav college, Chennai
B.Sc Visual communication, 2003-2005, WomenвЂ™s Christian college, Chennai
E-mail id : sruthym7@gmail.com
Vignesh J
Master of Science by Research (MS)
Department of Management Studies
Guide : Arun Kumar G
Title of thesis : Sector Index : Do they tell the right story?
Thesis abstract : Index in emerging economies are constructed similar to developed markets, although there
exist significant differences in the characteristics of the markets. Indian capital markets having been proved to be
inefficient, index construction by free float market capitalization method systematically under weights or over
weights the constituent stocks, thereby biasing the index. The effectiveness of a uniform method of index
construction in the context of the distinctive characteristics of the sectors and the need, if any, for dissimilar
method of index construction forms the core of this study. The relationship between the sector index and the nonindex stocks in a representative set of sectors is studied. Alternative methods of index construction and their
effectiveness are then compared. Daily closing price data of stocks listed in one of IndiaвЂ™s largest exchange,
National Stock Exchange, is analyzed. By testing for cointegration between the sector index and its stocks,
evidence has been found that a majority of stocks in specific sectors are cointegrated with a subset of the
constituent stocks rather than the index itself. It is concluded that market cap based index construction might not
accurately represent the sector and a uniform method of construction for all sectors might not be appropriate.
Skills :
Excel : Excel Macro
Time Series Analysis : E-Views
Statistical Packages : SPSS, SAS, R
Optimization Tool : Lingo, Excel Solver
Programming Languages : C, C++, Java, VB Scripting, SQL
MS Office : MS Word, MS Excel, MS PowerPoint, MS Access
Research interests :
Capital Markets
Market Efficiency
Econometric Techniques
Forecasting
Areas of interest : Quantitative Finance, RISK MANAGEMENT, Forecasting, Data Analysis, Econometric
Techniques, Financial Analysis and Valuation
About me :
I have been good at studies from my childhood scoring 90% in my X standard and 96% in my XII standard. I
joined Accenture after completing college and worked for about 16 months during which time i completed
certifications and brought about a improved and efficient work practice. I was during this time I developed a liking
for finance and joined IIT MS programme at DoMS. I developed an inclination toward equity, derivatives, bond
and data analytics. I had a specific interests in the field of quantitative risk management and time series analysis. I
further cleared CFA Level I and am appearing for Level II. I became adept at coding and data analysis using EViews, SPSS, Excel Macros, C++. In the past I have demonstrated good record of innovation skills, analytical
thinking, self-motivation and team spirit. I am adaptable and eager to learn new concepts and a as a whole person
of agreeable personality.
Education :
B.Tech Information Technology, College of Engineering, Anna University.
E-mail id : jvignesh@ymail.com
Department of Ocean Engineering
Harender
Doctor of Philosophy (PhD)
Department of Ocean Engineering
Guide : Dr. Srinivasan Chandrasekaran
Title of thesis : Power generation using Mechanical Wave Energy Converter
Wave energy, Power take-off mechanism, Risk analysis,
Thesis abstract : ABSTRACT KEY WORDS:
Mechanical wave energy converter, Point absorber, Model tests
Oil crisis in recent years has compelled
exploration of alternate resources of renewable energy; focus is set on large-scale power generation from ocean
waves. Potential for improvement of technologies on wave energy is high while survivability and reliability of many
devices are still to be demonstrated for offshore operations in particular. Salient advantages of wave energy are
namely: i) time required for research and development is shortened by the proven re-engineering technologies of
offshore oil and gas, wind power and shipbuilding industries; ii) wave power is predictable and dependable with
the ability to forecast wave power spectrum, days in advance; iii) environmentally benign and non-polluting; and
iv) energy density being the highest among renewable energy sources. Power available from wave energy is
considerably high in the heave degree-of-freedom. Recent research activities on wave energy converters deploy
hydraulic and pneumatic devices as power take-off mechanisms (PTO); complexities in the conversion
mechanisms result in expensive and high precision machining. Although shore line devices like oscillating water
columns do not require deep-water moorings or long lengths of underwater electrical cable, wave power exposed
is relatively lesser despite being an economical alternative. Recent studies show that use of hydraulic and
pneumatic devices as power take-off mechanisms result in complexities in the conversion mechanisms due to the
requirement of expensive and high precision machining. Experimental studies carried out by various researchers
on scaled model of wave energy devices show unique set of challenges in the integration of prime movers and
generators. Average wave energy potential along Indian coast is around 5 to10 kW per meter length of wave crest
which shall yield to a maximum of 20 kW/m during monsoon period. The present study describes feasible design
of a new mechanical wave energy converter along with the detailed design of its components that employs point
absorber as wave energy capturing device; proposed device is simple and easy to fabricate and maintain. The
scope of present work is limited to harness wave energy using point absorber in heave mode using a mechanical
power take-off mechanism. For harnessing wave energy, linear heave oscillation of the buoy is converted into
rotary motion through the design. Risk analyses are carried out on the proposed device using failure mode and
effects analysis that estimates risk and failure rate of different components; design modifications are made to
improve the proposed design of the device. Failure modes are highly detectable in the improved design, which is
one of the major advantages. Detailed experimental studies are also carried out on the scaled models of the
proposed devices to verify their functionality and suitability for operational sea states of Indian coast. Desired trials
in design and experimental studies are carried out to improve mechanical advantages of the wave energy
converter. Preliminary analyses are carried out to arrive at the design configurations of the newly proposed
mechanical wave energy converter. Various components are critically examined for their performance vulnerability
as a part of the preliminary analyses. Experimental investigations are carried out on the scaled model (1:5.5) of
the device to estimate its efficiency. Two floating buoys namely: i) 620 mm diameter and 500 mm height; and ii)
800 mm diameter and 700 mm height are deployed to draw power from the encountering waves. Overall
efficiency of the device is computed on the basis of average power measured at the output shaft. Based on the
experimental studies carried out on the device, it is seen that fluctuations in electric power generated from the
output shaft are reduced significantly by installing the flywheel. Design modifications made in the device
enhanced the mechanical efficiency from 13 to 19%. It is also seen that electric power output of the device
increases with the increase in wave height. Maximum electric power available at the output shaft of the device is
for 30 cm wave height and 2.8 s wave period, which is a near-resonance period of the float. Power available at
the shaft of the prototype device is significant for the developed mechanical system and is comparable with other
commercial alternatives available at present; compact design, cost effectiveness, ease of fabrication and cheap
maintenance make the proposed device more attractive. Operational wave period for the proposed device is in
the range of 5-8.2 s.
Skills :
Matlab
Wamit software
Solidworks software
Research interests :
Biofuels
Wave Energy
Solar Energy
Wind Energy
Areas of interest : Renewable Energy and Thermal Engineering
Publications/Conferences :
International Journals
1. Srinivasan Chandrasekaran and Harender (2010), Proposed mechanism of mechanical wave Energy
converter. Ship and Offshore, 4, 101 (2010).
2. Srinivasan Chandrasekaran and Harender (2012), Power generation using Mechanical Wave Energy
Converter, International Journal of ocean and climate systems, 3, 57-70.
3. Srinivasan Chandrasekaran, Amar Karthick Karuppan Sivakumar and Harender (2012), Laboratory
experiments on non-floating body to generate electric energy from ocean waves. Frontiers in Energy
(Accepted: Manuscript ID- FIE-2012-0014 dated 2-7-2012).
4. Srinivasan Chandrasekaran, Amar Karthick, Karuppan Sivakumar and Harender (2012), Experimental
Investigation on Novel Method of Improving Efficiency of Point Absorber by using a Non-Buoyant
object for Ocean Wave Energy Conversion.(Communicated in IET Renewable Power Generation,
Manuscript ID: RPG-2012-0244).
International Conferences
1. Srinivasan Chandrasekaran and Harender, вЂњDesign and efficiency analysis of Mechanical Wave Energy
ConverterвЂќ Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and
Arctic Engineering, OMAE 2011, June 19-24, 2011, Rotterdam Rotterdam,Netherlands.
2. Harender kumar and Shiv lal, A comparative study of karanja and soyabean biodiesel. Proceedings of
Ist International conference on "New Frontiers in Biofuels" January 18-19, 2010, New Delhi, India.
Patents filed/awarded
1. Srinivasan Chandrasekaran and Harender (2010), вЂњ Power generation using a mechanical wave energy
converter. Patent filed with Intellectual Property of India (Patent application No. 2482/CHE/2010 dated
27-8-2010).
About me :
I'm a God fearing person. I really enjoy meeting and working with a lot of different people.
I strongly believe that improvement in small small things bring perfection but perfection isn not a small
thing. Therefore, I pay attention to all the details, and like to be sure that everything is just right.
I'm a creative thinker. I like to explore alternative solutions to problems and have an open mind about what
will work best.
I'm efficient and highly organized. This enables me to be as productive as possible on the job.
I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.
Education :
Program
Specialization
Institution
%/CGPA
Year of completion
Ph.D
Ocean Engg.
Indian Institute of Technology Madras, Chennai
8.2
2012
(Thesis submitted)
M.Tech.
Thermal Engg.
Rajasthan Technical University, Kota, Rajasthan
7.3
2009
B.E.
Mech. Engg.
Maharishi Dayanand University, Rohtak, Haryana
6.7
2003
XII
Vaish Public School, Rohtak, Haryana
73
1998
X
S.M. Hindu Sr. Sec. School, Sonepat, Haryana
83
1994
E-mail id : harrysinhmar@gmail.com
Department of Mechanical Engineering
A. S. S. Balan
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. L.Vijayaraghavan
Title of thesis : Modeling and Simulation of Minimum Quantity Grinding (MQL) of Nickel Based Super Alloys
Thesis abstract : For decreasing environmental and health hazards, change from wet cutting to dry/near-dry
cutting is highly recommended. In recent years, Minimum Quantity Lubrication (MQL) machining is regarded as a
promising method for reducing machining cost and cutting oil, while improving cutting performance; thus, it has
been investigated vigorously. Minimum Quantity Lubrication (MQL) has a good advantage of green, lubricating
and cooling effect. Very few investigations have been carried out on the influence of MQL parameters, such as oil
flow rate and air pressure on droplet size. The work aims to develop a simulation model to replicate the mist
formation in MQL grinding using Fluent based Computational Fluid Dynamics (CFD) flow solver. The MQL
parameters considered are air pressure and the mass flow rate. Simulation of the atomization under turbulent
conditions was done in discrete phase model (DPM) owing to the fact that oil mass flow rates are very low and oil
acts as a discrete medium in air. Jet velocity and droplet diameters were obtained under different inputs to find the
optimum value of air pressure and mass flow rate of oil to achieve the better results in MQL grinding of superalloy
(Inconel 751).
Skills :
CAD Tools
Solver
CAM Tools
100iB,
Statistical tools
Catia v5 R15
Abaqus 6.5, Deform 3D 3.0, Fluent 6.3, Ansys 13
Cadem, Programming Formats includes Sinumerik, Fanuc, Heidenhein, Fanuc
Matlab R2009b, SPSS, MINITAB 16
Research interests :
Metal Removal Process
Computational fluid dynamics
Micromachining
Advanced material processing
Areas of interest : Modeling and Simulation of Manufacturing, Finite Element Analysis in Manufacturing, Metal
cutting
Publications/Conferences :
вЂ�Micromachining: technology for futureвЂ™ International Journal on Materials and structural Integrity,
Vol.1, Nos.1/2/3, 2007, pp. 161-179.
вЂ�Study on Parametric Influence, Optimization and Modeling in Micro WEDM of Ti AlloyвЂ™, Advanced
Materials Research, Vol. 76-78, 2009, pp 571-576.
вЂ�Optimization and Modeling of Micro-Wire Electro Discharge Machining of Titanium AlloyвЂ™, Journal for
Manufacturing Science and Production. Volume 10, 2009, Pages 147вЂ“154.
вЂ�Monitoring and prediction of tool wear in microturning of copperвЂ™, International Journal of Precision
Technology, Vol. 1, Nos. 3/4, 2010, pp.343вЂ“355.
Computational Fluid Dynamics Analysis for Predicting the Droplet Size in MQL during Grinding of
Superalloy ,37th MATADOR Conference 2012, Manchester, England.
Experimental Study on the Applicability of Minimum Quantity Lubrication in Grinding of Inconel 751 Alloy
вЂ�, AIMTDR Conference 2012, India.
An Investigation on Grindability of Nickel Based Superalloy, ICAMP 2011, International Conference on
Advanced materials and processing, Kavaraipettai, Chennai, India.
Study on Parametric Influence, Optimization and Modeling in Micro WEDM of Ti Alloy, ISAAT-2009,
International Symposium on Advances in Abrasive Technology, Australia.
On line monitoring of microturning process through Acoustic emission technique EUSPEN-2008,
International Conference of the European Society of Precision Engineering and Nanotechnology,
Zurich, Switzerland.
Optimization of Machining Parameter for surface finish in microturning of copper, COPEN-2007,
International conference on Precision, Meso, Micro and Nano engineering, Thiruvanthapuram,
Kerala, India.
Finite Element Analysis of Microturning of AISI 1045 Steel, International Conference on Advances
ICADM 2007, August 9-11, Sethu Institute of Technology, Kariapatti, Virudhu nagar, India.
Education :
M.S(by research) in Micromachining , 2006-2008,College of Engineering, Anna university, Chennai.
B E in Mechanical Engineering, Anna University, Chennai.
E-mail id : sheytrabalan@gmail.com
Abilasha T K
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. Krishnan Balasubramaniam
Title of thesis : Studies on the propagation of feature-guided ultrasonic waves in plates with small radius
transverse bends
Thesis abstract : Investigated the influence of bends constituting the profile of annular polygonal structures on
ultrasonic guided waves propagating along their axis. Considering a single bend as a bent plate connects this
problem to the better-understood physics of guided waves in straight plates. Using 3D finite element (FE)
simulation validated with experiments showed that bends in plates act as features that can concentrate and
guide ultrasonic energy along their length. Two interesting feature-guided modes are idiscoveredwhen the bent
plate is subjected to вЂ�in-planeвЂ™ or axial excitation applied uniformly along a through-thickness line bisecting the
bent edge. This mode is shown to be more strongly generated in smaller angle bends where it has a low
attenuation. The results are discussed in light of simple modal studies performed using the Semi Analytical Finite
Element (SAFE) method.
Skills :
Finite Element modeling with ABAQUS
Development of Virtual Instrument interface using LabVIEW
Working experience on Phased array Ultrasonic Equipment
Well experienced on Automated ultrasonic C-scan system and data analysis
Experience on all the conventional and Advanced NDE techniques and equipments
Research interests :
ultrasonic NDE
Material Characterisation
Lasers and Optical Fibers
Finite Elemement Analysis
Areas of interest : ultrasonic NDE Material Characterisation, Lasers and Optical Fibers, Finite Elemement
Analysis
Publications/Conferences :
International Journals - 3
International Confrence Proceedings - 4
National Conference Proceedings - 10
About me :
Aimed at building a career with committed and dedicated people and and seeking challenging research career to
learn new skills. Looking for a position that will make me a valued member of a team and willing to work in a
renowned organization wherein my skills can be put in worth and to make a high quality contribution.
Education :
Ph.D - Department of Mechanical Engineering, 2007-Till date, IIT Madras.
M.Tech - Non Destructive Testing, Department of Physics, NIT, Trichy
M.Sc - Physics, School of Physics, Madurai Kamaraj University, Madurai.
E-mail id : abilasha.ramadhas@gmail.com
Bogala Konda Reddy
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr. C. Balaji
Title of thesis : Estimation of Thermo-physical properties and transport coefficients using Liquid Crystal
Thermography experiments and Inverse techniques
Thesis abstract : Parameter estimation in inverse heat transfer concerns the estimation of causes (thermophysical properties and transport coefficients) from the effects (temperature). A parameter estimation problem is
generally an ill-posed problem as several causes could lead to the same effect. Stochastic based Bayesian
inference technique is used to estimate parameters. Temperature data required for the parameter estimation is
collected using Liquid Crystal Thermography experiments.
Skills :
Analytical: Governing equations, Boundary conditions and analytical solutions
Numerical: ANSYS, Fluent softwares and MATLAB programming
Experimental: Conducting experiments and analyzing results
Research interests :
Mutimode and Inverse Heat Transfer
Optimization in Thermal Sciences
Areas of interest : Heat transfer, Fluid & Thermal sciences, Optimization of thermal systems
Publications/Conferences :
B. Konda Reddy, C. Balaji, "Estimation of temperature dependent heat transfer coefficient in a vertical
rectangular fin using liquid crystal thermography", International Journal of Heat and Mass Transfer, 55
(2012), 3686вЂ“3693.
B. Konda Reddy, N. Gnanasekaran, C. Balaji, Estimation of thermo-physical and transport properties with
Bayesian inference using transient liquid crystal thermography experiments, International Journal of
Physics: Conference series (in press).
C. Balaji, B. Konda Reddy, H.Herwig, Incorporating engineering intuition for parameter estimation in
thermal sciences, Journal of Applied Physics (under review).
B. Konda Reddy, N. Gnanasekaran, C. Balaji, Simultaneous Estimation of Multiple Parameters with
Bayesian Inference Based on Liquid Crystal Thermography Data, 21st National and 10th International
ISHMT - ASME Heat and Mass Transfer Conference, IIT Madras, India, 27 - 30th December, 2011.
About me :
I am basically a hard working person.
Education :
Ph. D.: Pursuing in Heat transfer area, 2010-till date, IIT Madras.
M. Tech.: Thermal Engineering, 2005-2007, NIT Warangal.
B. Tech.: Mechanical Engineering, 2000-2004, JNTU Hyderabad.
D. M. E.: Mechanical Engineering, 1996-1999, Vasavi Polytechnic, Banaganapalli.
S.S.C.: 1995-1996, ZPH School, Chennur, YSR District.
E-mail id : bogala.kondareddy@gmail.com
D. Giridhar
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. L. Vijayaraghavan
Title of thesis : Micro-grooving studies on different ceramic materials
In general there are two strategies adopted in machining of ceramic materials. They are
Thesis abstract :
removing the material at lower depth of cut and machining the material at higher temperature. While removing the
material at lower depth of cut, material behaves in a ductile manner, whereas at higher temperature above glass
transition temperature, the material softens and behaves as a ductile material. It is essential to understand the
mechanism of material removal that helps to identify the desirable conditions of the machining process. The
mechanism of material removal changes during ductile to brittle transition of work piece material. So for
enhancing the ceramic machinability. The objective of the present work is to study the material removal
mechanisms in a scratch test with effective strategy in condition monitoring to identify the conditions of ductile to
brittle transitions in the different ceramic materials using Acoustic Emission sensor.
Skills :
Structural and thermal analysis in FEA softwares
Condition monitoring in machining process
Fabrication of experimental setup
Designing and conducting experiments
Material preparations вЂ“ polishing, etching
Software skills
FEA Packages вЂ“ ANSYS, ABAQUS
Modeling & Drafting packages вЂ“ Pro-E Wildfire, AutoCAD
Programming packages - Matlab, COMSOL
Statistical packages- Minitab, SPSS, Qualitech
NI Labview 8.0
Research interests :
Non-traditional machining of materials
Condition monitoring of process
Optimization techniques
Machine vision
Modeling of machining process
Areas of interest : вЂў Structural and thermal analysis in FEA softwares вЂў Condition monitoring in machining
process вЂў Fabrication of experimental setup вЂў Designing and conducting experiments вЂў Material preparations вЂ“
polishing, etching
Publications/Conferences :
Giridhar, D., Vijayaraghavan, L., Krishnamurthy, R., вЂњAcoustic emission response of sintered alumina
zirconia composite during grooving processвЂќ, NDT & E International, Volume 46, March 2012, Pages
55-62.
- Analyzed the acoustic emission signal properties in Zirconia Toughened Alumina for
modes of grooving.
analyzing different
Giridhar, D., Vijayaraghavan, L., Krishnamurthy, R, вЂњAnalytical Modelling of grooving process for
validation of AE response in Alumina ceramicsвЂќ, International conference on advanced materials and
processing held at RMK Engineering College, Chennai, 2011, pp. 256 -262.
-Validated the strain energy released during the material removal and the Root Mean Square energy of the
Acoustic emission signal during a grooving process.
D. Giridhar, L. Vijayaraghavan, R. Krishnamurthy,вЂќStudy on the effect of acoustic emission sensor
position in a micro-grooving processвЂќ, presented at ASME International Mechanical Engineering
Congress & Exposition, November 11-17th , 2011, Denver, CO, USA.
- Acoustic emission sensor was kept at two different locations viz. tool and below the work piece for the
same conditions of the micro-grooving process. Several AE parameters such as root mean square, event
duration, rise time, number of counts, peak frequency and power of the signal were taken into consideration.
Giridhar, D., Vijayaraghavan, L., Krishnamurthy, R., вЂњAn Approach for Identification of Mode in Micro
Grooving of Sintered AluminaвЂќ, All India Manufacturing Technology, Design and Research (AIMTDR),
December 2010, pp. 861- 866. (accepted in International Journal of Precision Technology)
- Evaluation of acoustic emission parameters for the identification of the mode of grooving in alumina ceramic
material.
Giridhar, D., Vijayaraghavan, L., Krishnamurthy, R., вЂњMicro-grooving studies on Alumina ceramic
materialвЂќ, Journal of materials and manufacturing process, 2010, Vol.25, 1148-1159.
- Studied the grooving process of ceramic materials and the ductile mode of grooving was identified at certain
conditions of grooving
Muruganantham, C. Jawahar, N., Ramamoorthy, B. and Giridhar, D. , вЂњOptimal settings for vision
camera calibrationвЂќ, International Journal of Advanced Manufacturing Technology, 2009, Vol. 42, pp.
736вЂ“748.
- Analysed Tsai camera calibration algorithm by using Taguchi Orthogonal array design,
the optimal
conditions of CCD camera were identified using optimization techniques such as Taguchi quality loss function,
Total loss function and desirability functions.
About me :
Dynamic
Perseverant
Adaptable
Co-ordinative
Education :
M.E. Production Engineering, 2004-2006, Anna University
B.E. Mechanical Engineering, 1999-2003, Bharathiar university
E-mail id : me06d014@smail.iitm.ac.in
Finney Charles
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. R. Gnanamoorthy and Dr. Parag Ravindran
Title of thesis : Rolling Contact Fatigue behavior of polymer nanocomposite.
Thesis abstract : Polymeric viscoelastic materials are replacing metallic components in many engineering
applications because of their superior tribological and self-lubrication properties over metals in light load
applications. Polymers are reinforced with micro and nano particles in order to widen the application of polymeric
materials for engineering components like gears, bearings, cams, wheel and rail and more. One can find a large
number of research studies of composites filled with micro and nano particles primarily in sliding conformal
contact conditions. However, the rolling contact fatigue behavior is different from the pure sliding contact behavior.
Research on rolling contact fatigue of polymer materials is scarcely available and there is a tremendous lack of
knowledge in this area with respect to the polymer nanocomposites. Current study involves the investigation of
rolling and rolling- to-sliding contact mechanisms and mode of failures in rolling contact mechanism. The research
also involves finite element study of viscoelastic polymer material under rolling contact fatigue conditions using
ABAQUS.
Skills :
Modelling Software: Pro-E, Solid works, AutoCAD.
Analysis Software: Abaqus and Ansys.
Other softwares: Matlab, NI Labview, Latex and MS office.
Research interests :
Design and development of machine elements (polymeric micro-nano composite materials)
Analysis of engineering components (Elastic and viscoelastic materials) using commercial FE packages
Areas of interest : Machine Design, Manufacturing of Composite Structural Components, finite element analysis
Publications/Conferences :
International Journals
Finney Charles, D. Gnanamoorthy, R. and Parag Ravindran (2010) вЂњRolling Contact Fatigue behavior of
polyamide Clay reinforced Nanocomposite - Effect of Load and SpeedвЂќ, Wear, 269, 565вЂ“571.
Finney Charles, D. Gnanamoorthy, R. and Parag Ravindran (2012) вЂњThe e?ect of nano-clay reinforcement
on the rolling contact fatigue behaviour of polyamide 6 вЂќ, IMechE Part J: Journal of Engineering Tribology,
(available online from 20th Augest).
International Conferences
Finney Charles, D. and Gnanamoorthy, R. вЂњRolling contact fatigue behavior of polyamide 6
nanocompositeвЂќ, , July 2-4, 2008, IISc Bangalore, India.
Finney Charles, D. and Gnanamoorthy, R. вЂњE?ect of speed on rolling contact fatigue performance of
polymer clay based nanocompositesвЂќ, ICIT-2008, December 06-08, 2008, 6th International conference on
Industrial Tribology, New Delhi.
Finney Charles, D. Gnanamoorthy, R. and Parag Ravindran, вЂњA constitutive model for polymeric
nanocomposite material subjected to cyclic contact loadingвЂќ, ICNANO-2011, December 18-21, 2011,
University of Delhi, New Delhi.
Finney Charles, D. Gnanamoorthy, R. and Parag Ravindran, вЂњPolymer
nanocomposites and its application in rolling contact fatigueвЂќ, RAMP-2011 December 23-24, 2011, PSG
College of Technology, Coimbatore
Finney Charles, D. Gnanamoorthy, R. and Parag Ravindran, вЂњIn?uence of stress on nano-clay reinforced
Polyamide 6 subjected to rolling contact fatigue вЂќ, ASME/IMECE 2012, November 09-15, Houston, Texas,
USA.
National Level comference
Finney Charles, D. and Joseph Davidson, M. and Sivasankaran вЂњEffect of bolt-hole clearance, clamping
resistance, strength criterion and 3-D stress analysis in composite bolted joint using FEAвЂќ,
NCLTME-2005, April 1-2, 2005, Pollachi, India.
About me :
I am largely an experimental person who would like to pursuit a career where there is a lot of scope for
experimenting and development of new components and test rigs for the conduction of experiments/testing of
components. My current research is a study of polymeric nanocomposite behaviour under rolling contact fatigue
loading conditions. I have a strong passion towards teaching and sharing which i would like to take up after a
decade with a strong industrial background.
Education :
Diploma in Mechanical Engineering, (85 %), 1996-2000, Techincal Education, Tamil Nadu
B. E , Production Engineering (7.89 CGPA), 2000-2003, Bharathiar University, Tamil Nadu.
M. E , CAD/CAM, (8.4 CGPA), 2003-2005, Anna University, Tamil Nadu
E-mail id : fincharles@gmail.com
Ismail Gani Rahamathullah
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. M.S. Shunmugam
Title of thesis : Modeling and Analyses of Forces and Hole Quality in Micro-drilling of Glass/Carbon Fabric
Laminated Composites
Thesis abstract : Aerospace and automobile industries use components made of composites which require
micromachining operations to be carried out. Excessive thrust and torque are detrimental to the life of the microdrills, and the quality of holes produced. This work investigates the cutting forces and quality of the holes
produced during micro-drilling of plain sheet (matrix material), glass fibre and carbon fabric laminated plastics.
Prediction models for thrust force and torque are developed based on drill geometry and minimum uncut chip
thickness and validated with experimental data. The results show good agreement between the measured and
predicted values. Delamination damage, roundness error and diameter of these drilled holes are measured and
analyzed with variation of the process parameters. The results indicate that the good quality, high aspect ratio
micro-holes can be produced by selecting proper process parameters and strategy.
Skills :
Programming Software:
Design and Analysis Software:
Post-processing software:
Other Software:
Special Machine Tools Handled:
Instruments Operated:
C, Matlab
AutoCad, SolidWorks, Catia, Ansys, Abaqus
Cimatron
Ms Office, Minitab, SPSS, ESP Util, Heidenhain
Kern Evo 5-axis micro-machining centre,Miiniaturized Machine tool (MMT)
Perthometer, Roundness tester, Non-contact 3D Profiler, Carl-Zeiss CMM
Research interests :
Mechanical micro-machining
Modeling and simulation of machining processes
Signal processing in machining processes
Metrology
Areas of interest : Micro-machining, Micro-manufacturing, process modeling, simulation
Publications/Conferences :
Journal papers based on Ph.D thesis
Rahamathullah, I. and Shunmugam M. S., вЂњThrust and Torque Analyses for Different Strategies Adapted in
Micro-drilling of Glass-Fibre-Reinforced PlasticвЂќ, Journal of Engineering Manufacture, IMechE, Part - B: 225,
505-518.
Rahamathullah, I. and Shunmugam M. S., вЂњAnalyses of Forces and Hole Quality in Micro-drilling of Carbon
Fabric Laminate CompositesвЂќ, Journal of Composite Materials. 2012, DOI: 10.1177/0021998312445594.
Rahamathullah, I. and Shunmugam M. S., Force prediction model for micro-drilling of epoxy based fibre
reinforced composites (to be communicated)
About me :
Nationality:
Languages Known:
Hobbies:
About me:
Indian
Tamil (Mother tongue), English, Hindi and Arabic (R)
Playing cricket, ball badminton
Self motivated, Team player, Adaptable, facinated with numbers
Education :
B.E., Mechanical Engineering, Bharathidasan University, Trichy
M.E., Manufacturing Engineering, Anna University, MIT Campus, Chennai
E-mail id : irahamath@yahoo.com
P Kondaiah
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr. Shankar Krishnapillai and Dr. N Ganesan
Title of thesis : Finite Element Analysis of Magneto-Electro-Elastic structures under Thermal environment
Thesis abstract : Magneto-electro-elastic (MEE) composite materials have the ability to generate magnetic,
electric and mechanical responses when they experience a thermal stimulus due to its significant coupling
between mechanical, electric, magnetic and thermal fields, which are potentially useful in smart or intelligent
structure applications.These composites provide the product properties (pyroelectric and pyromagnetic ) strong
enough to be useful for many practical applications. For example, enhancing the performance of more traditional
sensors. Response studies are carried out for the application of two phase MEE materials as sensor bonded to
mild steel beam, plate and shell under thermal environment. The aim of the study is to to examine the pyroelectric
and pyromagnetic effects on MEE sensors. These studies will be useful for enhancing the performance of
magneto-electro-elastic sensors under thermal environment.
Skills :
ANSYS, MATLAB, ADAMS, PRO-E, FORTRAN, MAPLE, ABACUS, AutoCAD
Research interests :
Smart Structures
FEM
Areas of interest : Smart Structures, FEM
Publications/Conferences :
Publications in International Journals
1. P. Kondaiah, K. Shankar and N. Ganesan, вЂњPyroelectric and pyromagnetic effects on multiphase magnetoelectro-elastic cylindrical shell for axisymmetric temperatureвЂќ Smart materials and structures (Minor
revision submitted)
2. P. Kondaiah, K. Shankar and N. Ganesan, вЂњPyrolectric and pyromagnetic effects on behavior of magnetoelectro-elastic plateвЂќ Int. Journal of Coupled Systems and Mechanics (Under Review)
3. P. Kondaiah, K. Shankar and N. Ganesan (2012), вЂњStudies on Magneto-Electro-Elastic Cantilever Beam
under Thermal environmentвЂќ Int. Journal of Coupled Systems and Mechanics, 1(2), 205-217.
4. P. Kondaiah, K. Shankar and N. Ganesan (2012), вЂњMagneto-electro-elastic beam under thermal
environmentвЂќ. International journal of Advanced Materials Manufacturing & Characterization, 1(1), 36-47.
Publications in International Conferences
5. P. Kondaiah, K. Shankar and N Ganesan, вЂњThe Pyroelectric and Pyromagnetic effects on multiphase
Magneto-Electro-Elastic sensors bonded to mild steel cantilever beamвЂќ, (AMPC2013), Anna University
Chennai, India, 6th -8th February, 2013. (Accepted)
6. P. Kondaiah, K. Shankar and N Ganesan, вЂњStudies on multilayer multiphase MEE/BaTiO3 Beam under
Thermal environmentвЂќ, (ICCMS 2012), IIT Hyderabad, India, 10th -12th December, 2012 (Accepted)
7. P. Kondaiah, K. Shankar and N Ganesan, вЂњMagneto-Electro-Elastic Smart Cantilever Plate under Uniform
TemperatureвЂќ (CAN2012 AES-ATEMA), McGill University Montreal, Canada, 18th -22nd June, 2012.
8. P. Kondaiah, K. Shankar and N Ganesan, вЂњOptimal placement of Magneto-Electro-Elastic sensor on
cantilever beamвЂќ, (IC-MAST 2012), Budapest, Hungary, 24th -28th May, 2012.
9. P. Kondaiah, Sathisha H M, Appu Kuttan K K and Ravikiran Kadoli, "Investigation on free vibration due to
laminar flow of lubricant in a pipe" (FIME 2010), NIT Karnataka, Surathkal, India, 20th -22nd May, 2010.
10. Narasimha Marakala, P. Kondaiah, Appu Kuttan K K and Ravikiran Kadoli, "Experimental studies on
dynamic behavior of cantilever slender pipe conveying compressed air " (ISTAM 2009), Netaji Subhas
Institute of Technology, New Delhi, India, 18th -21st December, 2009.
Education :
B. Tech Mechanical Engineering, JNTU, Hyderabad, 2006.
M. Tech Manufacturing, Mechanical Engineering, NIT Karnataka, Surathkal, 2009.
Ph. D. Machine Design, Mechanical Engineering, IIT Madras, Chennai, 2010 onwards.
E-mail id : kondaiah4nitk@gmail.com
P Nandakumar
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr Shankar Krishnapillai
Title of thesis : Parametric identification and damage detection of structures using transfer matrix and state
vector in the time domain.
Thesis abstract : Parametric identification of a structures is posed an inverse problem in which the parameters
of the structure are identified from input and output responses of the structure. A new structural identification (SI)
method based on Transfer Matrix (TM) concept is proposed here to identify structural parameters. Transfer
matrices based on lumped mass and the more accurate consistent mass models are used here, based on
displacement measurements in the time domain. The consistent mass based TM is derived from the dynamic sti
ness matrix of a beam element with and without damping. The state vector at a location is the sum of the internal
and external contributions of displacements, forces and moments at that point - when multiplied with the TM, we
obtain the adjacent state vectors. The method of identification proposed here involves predicting the
displacements at certain locations using the TM, and comparing them with the measured displacements at those
locations. The mean square deviations between the measured and predicted responses at all locations are
minimized using an optimization algorithm, and the optimization variables are the unknown sti ness and damping
parameters in the TM. A non-classical heuristic Particle Swarm Optimization algorithm (PSO) is used, since it is
especially suited for global search. Di erent strategies for calculating the initial state vector, as well as two
identification processes such as simultaneous and successive methods are discussed. Numerical simulations are
carried out on four examples ranging from a simple spring mass system to a nine member framed structure. The
method is also experimentally validated on a cantilever and a substructure of a fixed beam.
A new transfer
matrix has been developed for cracked beam elements. Using the TM for cracked beam element the seviority of
damage and its location also detected. The speed and accuracy of identification using this method are good. One
main advantage of this method is that it can be applied at any portion of the structure to identify the local
parameters in that zone without the need to model the entire global structure.
Skills :
Matlab
Ansys
Research interests :
Parameter identification of structures
Damage detection in structures
Optimization techniques
Mechanical vibration
Kinematics and dynamics of machinery
Areas of interest : Machine dynamics, Machine Design, Optimization of Mechanical systems
Publications/Conferences :
International Conference
1.
P. Nandakumar and K.Shankar, Identification of Structural Parameters Using Transfer Matrix and State
Vectors in Time Domain, in Proc of 5th International Conference on Advances in Mechanical Engineering, S.V.
National Institute of Technology, Surat , India, pp 175-179, June 06-08, 2011.
2.
P. Nandakumar and K.Shankar, Simultaneous and Successive Identification of Structural Parameters in
Time Domain using Transfer Matrices, ANNA WORLD CONGRESS & EXPO, Chennai, December 1-3, 2011.
3.
P. Nandakumar and K.Shankar, Particle Swarm based Structural Identification using Consistent mass
Transfer Matrix Method, in Proc. of Advances in Control and Optimization of Dynamic systems
(ACODS-2012), Indian Institute of Science, Bangalore, India, February 16-18, 2012.
4.
P. Nandakumar and K.Shankar, Identification of Structural Parameters using Damped Transfer Matrix and
State vector, in Proc. of UKACC International conference on Control, Cardiff, UK, pp 870-875, September 3-5,
2012.
International Journal
1. P. Nandakumar and K.Shankar, Estimation of Structural Parameters using Transfer Matrices and State
Vectors, International Journal of Applied Science and Engineering, Vol.10, No.3, 2012. (In Print)
2. P. Nandakumar and K.Shankar, Structural Parameters Identi
About me :
DOB 16.04.1974
Age: 38
Native: Erode, Tamil nadu
Mother tongue : Tamil
Languages Known: Tamil, English
Maritial status: Married
Education :
B.E. Mechanical Engineering, 1992-1996, Bharathiar University
M.E. Engineering Design, 1996-1998, PSG College of Technology
E-mail id : ppnkumar74@gmail.com
R. Ramakrishnan
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr.Somashekhar S.Hiremath & Dr.M. Singaperumal
Title of thesis : Theoretical and experimental investigations on series hydraulic hybrid system for passenger
vehicles.
Thesis abstract : Today, non-availability of gasoline and its high price compel industries like automobile,
agricultural machinery and construction machinery find an alternative technology that could create fuel efficient
and energy saving systems. In this current scenario, Hydraulic hybrid systems are mitigation measure for the
current fuel crisis. It is a combination of two source of power, typically, one energy source is used for the
conversion of fuel to energy and the other source is used as storage unit. Series hydraulic hybrid system consists
of subsystems such as prime mover, hydraulic pump, hydro-pneumatic accumulator and hydraulic motor in series
configuration. In conventional systems, kinetic energy in wheels is lost as heat energy during mechanical friction
braking, but, series hydraulic hybrid system has the capability to regenerate the kinetic energy into useful
hydraulic energy and it's called hydraulic regenerative braking. Scope of work : Mathematical model of series
hydraulic hybrid system is developed and subsequent simulation of the system is carried out. To achieve
maximum transmission efficiency,a multi-objective parametric optimization is carried out on system mathematical
model to get optimal system parameters . To control the power from two sources efficiently,a power management
control strategy is developed . Experimental investigations on series hydraulic hybrid system are carried out to
validate the control strategy and simulation results.
Skills :
Knowledge based skill :Well versed in physical system modeling using Power Bond Graph Modeling Technique.
Computer Skills :
CAE software
LMS AMESim, 20 SIM, MATLAB / SIMULINK, ADAMS-VIEW/CAR, LABVIEW, ModeFRONTIER.
CAD software
SOLIDWORKS 2011, PRO-E 2009, CATIA, AUTODESK, AUTOCAD(2D), ANSYS, ABACUS.
Others
MS-DOS, MS-office, OriginPro, Windows 95-2000, Xp, Hardware and Assembling
Transferable skills :Communication вЂ“ speaking, writing.
Research and Planning вЂ“ gathering and analyzing information, goal setting and strategy development.
Soft skills :1. Delivered an invited talk on "Recent Trends in Hydraulic : Hydraulic Hybrids" at workshop on Industrial
Hydraulics to Ashok Leyland Pvt.Ltd held on 16-18 August 2011 in Engineering Design Department, IIT
Madras, CHENNAI.
2. Delivered an invited talk on "Hybrid Vehicles - the Future of Transportation" to third year automobile
engineering students held on 16th March 2012 at Velammal Engineering College, CHENNAI.
3. Delivered an invited talk on "Role of Artificial Intelligence in Humanoid Robots" at Robotix Research
Academy, ADYAR, CHENNAI.
4. Delivered an guest lecture on "Introduction to robotics" to school students at Tamilnadu Science and
Technology Centre (Birla Planetarium),CHENNAI organized by RACE Robotics Pvt.Ltd.
5. Cleared Ph.D comprehensive viva examination.
Research interests :
Hydraulic Hybrid system, Mechtronics, Robotics, Dynamics and Control,System Modeling and Simulation,Multiobjective optimization.
Areas of interest : Mechatronics, robotics, Fluid power
Publications/Conferences :
International Journal (Peer reviewed):
1. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, Theoretical investigations on the effect of
system parameters in series hydraulic hybrid system with hydrostatic regenerative braking, The Journal of
Mechanical Science and Technology, vol. 26, no. 5, pp.1321-1331, 2012.
International Conference (Peer reviewed):
1. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal Open Loop Dynamic Performance of
Series
Hydraulic Hybrid System with Hydrostatic Regenerative Braking, Proceedings of ASME-JSMEKSME Joint
Fluids Engineering Conference 2011(AJK2011-FED), July 24-29, 2011, Hamamatsu,
Shizuoka, Japan.
2. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, "In-line Inspection Robot System
using Image
Processing Technique", Proceedings of International Conference on Plant Equipment and
Reliability
(ICPER2010), June 15-17, 2010, Kuala Lumpur, Malaysia.
3. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, "Power bond graph modeling of
series
hydraulic hybrid system", Proceedings of the 37th National & 4th International Conference on
Fluid Mechanics
and Fluid Power (ICFMFP2010) , FMFP10 - FP - 16, December 16-18, 2010, IIT
Madras, Chennai, India.
4. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, "Prediction of Closed-loop Behavior
in Series
Hydraulic Hybrid System from Open-loop Response using Frequency Domain Analysis" ,
Proceedings of
International conference on advances in manufacturing technology (ICAMT), 15-17
June,2012, Chennai, India.
5. R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, " Power Bond Graph Modeling,
Simulation and Parametric Design Optimization of Series Hydraulic Hybrid System" , Proceedings of
International conference on All India Manufacturing Technology, Design and Research (AIMTDR), 15-17
December, 2012, Kolkata, India.
National Conference:
1.
R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal, " Development of Production line
Machine Vision-Inspection System with Articulated Arm Robot Manipulator", Proceedings of National Conference
on Mechanical Engineering Technology (COMET), June 4, 2011,kerala,India.
2. R. Ramakrishnan and R. Sivaramakrishnan, "Modeling, analysis and feasibility study of teleoperated robot
manipulator for a battle tank", Proceedings of National conference on SNCETET, 2009, Bangalore.
3.
R. Ramakrishnan and R. Sivaramakrishnan, "Kinematics and dynamics analysis of teleoperated robot
manipulatorвЂќ, Proceedings of National conference on COMAX, 2009, Chennai.
About me :
I am Ramakrishnan from chennai doing my 4th year Doctor of Philosophy in Hydraulic Hybrid Vehicle. I did my
schooling in N.DJ.V.V Vivekananda Vidyalaya (CBSE) ,Bachelors in Mechanical Engineering from Anna university
and Masters in Manufacturing Engineering from Madras Institute of Technology,Chennai. I feel Privileged to
pursue my Ph.D in this esteemed world class instituttion.
I am passionate about innovations and engineering which help society. i have developed several robots and
mechanisms by my own interest , which are useful to common people in day to day life. generally, I think that
instead of working hard, i use to work intelligent.My optimistic and planned approach in things i do is what driving
me towards my success.
I come from a middle class family born and brought in the multi-cultured,multi-cuisine flavours of chennai. i am the
last son of my parents. I have an elder brother and sister. My elder brother is also a Ph.D in medicine and i got
inspiration from him to pursue my research carrier.
Education :
Ph.D,Hydraulic Hybrid Vehicle,CGPA-9,Year of Passing-on going,Indian institute of Technology Madras (IITM).
M.E, Manufacturing Engineering,CGPA-9.3,Year of Passing-2009,Madras institute of Technology (MIT),Chennai.
B.E,Mechanical Engineering,79%,Year of passing-2007,Anna university, Chennai.
XIIth Standard, 85.33 %,Year of passing-2003,Kaligi Ranganathan Montford Higher Secondary School,Chennai.
Xth standard,68.40 %,Year of passing-2001,CBSE,N.D.J.V.V Vivekananda Vidyalaya,Chennai.
E-mail id : ramakrishnan20@gmail.com
Rajendra Machavaram
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr. Shankar Krishnapillai
Title of thesis : Structural Identification Using Improved Artificial Neural Networks
Thesis abstract : Purpose- The main purpose of the present investigation is to provide an effective and simple
technique to structural damage identification particularly to identify the crack in a structure. Artificial neural
networks approach is an alternative to identify the extent and location of the damage over the classical methods.
Radial basis function (RBF) networks are good at function mapping and generalization ability among the various
neural network approaches. RBF neural networks are chosen for the present study of crack identification.
Design/Methodology/Approach- Analyzing the vibration response of a structure is an effective way to monitor its
health and even to detect the damage. A novel two-stage improved radial basis function (IRBF) neural network
methodology with conventional RBF in the first stage and a reduced search space moving technique in the
second stage is proposed to identify the crack in a cantilever beam structure in the frequency domain. Latin
hypercube sampling (LHS) technique is used in both stages to sample the frequency modal patterns to train the
proposed network. Study i s also conducted with and without addition of 5% white noise to the input patterns to
simulate the experimental errors. Findings- The results show a very good significant improvement in identifying
the location and magnitude of a crack by the proposed IRBF method in comparison with conventional RBF
method and other classical methods. For a typical test case, the crack depth was identified with 0.80%
identification error by the proposed IRBF method in comparison with 6.59% by the other classical methods. It
takes very less computational effort to identify the crack as compared to other hybrid neural network approaches
and classical methods. Originality/value- The proposed novel IRBF crack identification technique is unique in
originality and can identify the crack location and crack depth with very good accuracy, less computational effort
and simple technique.
Skills :
Research Areas: Farm Power and Renewable Energy, Design optimisation, Damage identification and
evolutionary algorithms.
Languages: C/C++
Softwares: MS office, MATLAB, AutoCad2007, Mechanical Desktop 6, ProE (Wildfire2&3), SAP, VB6,
Design expert.
Tools: FEA, CCRD, ANN, PSO and GA.
Research interests :
Farm Power and Renewable Energy
Design optimisation
Damage identification and evolutionary algorithms.
Areas of interest : Farm Power and Renewable Energy, Design optimisation, Damage identification and
evolutionary algorithms.
Publications/Conferences :
Conference Papers:
Rajendra, M. and Shankar, K. (2011). вЂњDamage Identification of Multimember Structure Using Improved
Neural NetworksвЂќ. Proceedings of the International Conference on Design and Advances in Mechanical
Engineering (ICDAAME 2011), SKP Engineering College, Tiruvannamalai, TN., India. 16-17 December,
2011. pp. 89-96.
Rajendra, M. and Shankar, K. (2012). вЂњStructural Damage Detection in Time Domain Using Improved RBF
Neural NetworksвЂќ. Proceedings of Advances in Control and Optimization of Dynamic Systems (ACODS
2012), J. N. Tata Auditorium, Indian Institute of Science (IISc) Bangalore, KA., India. 16-18 February,
2012.
Journal Papers:
Rajendra, M. and Shankar. K., " Structural Damage Identification Using Improved RBF Neural Networks in
Frequency Domain," Advances in Structural Engineering, Vol. 15, No. 10, 2012, pp. 1689-1703.
Rajendra, M. et al., "Biodiesel production from mixture of mahua and simarouba oils with high free fatty
acids," Biomass and Energy, Vol. 34, 2010, pp. 1108-1116.
Rajendra, M. et al., "Predicting the draught requirement of tillage implements in sandy clay loam soil using
an artificial neural network," Biosystems Engineering, Vol. 104, 2009, pp. 476-485.
Rajendra, M. et al., "Prediction of optimized pretreatment process parameters for biodiesel production
using ANN and GA," Fuel, Vol. 88, 2009, pp. 868-875.
About me :
Rajendra Machavaram received his Masters Degree (M. Tech) from the Indian Institute of Technology Kharagpur
(IIT Kharagpur) in 2008 specializing in the area of Farm Machinery and Power. He worked from 2008 to 2010 as
Research and Development Member at the TAFE R&D Center, Chennai, India. He is currently a Ph. D. Scholar in
the Mechanical Engineering Department of the Indian Institute of Technology Madras (IIT Madras). His research
interests are Farm Power and Renewable Energy, Design optimisation, Damage identification and evolutionary
algorithms.
Education :
B. Tech Agricultural Engineering, ANGRAU, Hyderabad, 2002-2006.
M. Tech Farm Machinery and Power, IIT Kharagpur, Kharagpur, 2006-2008.
Ph. D. Machine Design, Mechanical Engineering, IIT Madras, Chennai, 2010 onwards.
E-mail id : rajendra01041986@gmail.com
Rajesh Baby
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof.C.Balaji
Title of thesis : Experimental studies on thermal performance of Phase Change Material (PCM) based heat sinks
Thesis abstract : Experimental investigations on finned heat sinks filled with phase change materials for thermal
management of portable electronic devices. The phase change material (PCM) used is n-eicosane and is placed
inside a heat sink made of aluminium. Aluminium acts as thermal conductivity enhancer (TCE), as the thermal
conductivity of the PCM is very low. The heat sink acts as an energy storage and a heat-spreading module.
Studies are conducted for heat sinks on which a uniform heat load is applied for the unfinned and finned cases.
The test section considered in all cases in the present work is a 80 x 62 mm2 base with TCE height of 25 mm. A
60 x 42 mm2 plate heater with 2 mm thickness is used to mimic the heat generation in electronic chips. Heat sinks
with pin fin and plate fin geometries having the same volume fraction of the TCE are used. The effect of different
types of fins for different power level (ranging from 2 to 7 W) in enhancing the operating time for different set point
temperatures and on the duration of latent heating phase were explored. The results indicate that the operational
performance of portable electronic device can be significantly improved by the use of fins in heat sinks filled with
PCM.
Skills :
Optimization of thermal systems using ANN and GA
Matlab
Research interests :
Thermal management of electronics
Phase Change heat transfer
Optimization of thermal systems
Areas of interest : Heat transfer, Refrigeration and air conditioning, Cryogenics
Publications/Conferences :
Rajesh Baby and C. Balaji, вЂњExperimental investigations on phase change material based finned heat
sinks for electronic equipment coolingвЂќ, International Journal of Heat and Mass Transfer, Vol. 55, 2010,
pp. 1642-1649.
Rajesh Baby and C. Balaji, вЂњA neural network based optimization of thermal performance of PCM based
finned heat sinksвЂќ, Experimental Heat Transfer, 2012 (in press)
Rajesh Baby and C. Balaji, вЂњThermal management of electronics using phase change material based pin
fin heat sinks вЂќ, International Journal of Physics: Conference Series , 2012 (in press)
Rajesh Baby and C Balaji, " Improving the performance of portable electronic equipment using finned heat
sinks filled with phase change materials" , 21st National & 10th ISHMT-ASME Heat and Mass Transfer
Conference, IIT Madras, December, 2001 27-30,
About me :
Hard working
Can easily work in groups
Education :
B.Tech Mechanical Engineering, 1997-2001,M.G.University, Kerala
M.Tech in Industrial Refrigeration and Cryogenic Engineering, 2002-2004, Kerala University, Kerala
E-mail id : rbaby55@gmail.com
Rajesh Kumar Panda
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr. B.V.S.S.S. Prasad
Title of thesis : CONJUGATE HEAT TRANSFER FROM A FLAT PLATE WITH COMBINED IMPINGEMENT
AND FILM COOLING
Thesis abstract : Several cooling schemes are used in gas turbine blades to ensure that the blade temperature
and thermal stresses are within safe limits. Among them, film (on external surface) and impingement (on internal
surface) cooling are frequently used. Previous researchers investigated either film cooling or impingement cooling
independently. However, investigation with the combined film and impingement schemes are sparsely reported. In
the present paper, such a study on a flat plate will be reported with experimental as well as computational
investigations. External side of the plate is exposed to hot mainstream as well as to the (film) coolant. The other
(internal) side experiences impinging air jets. A specific geometric configuration with multiple staggered rows of
cylindrical film holes and a matrix of impingement holes are considered. Each film hole has a stream-wise
injection angle of 35В° with length to diameter ratio of four. Thermochromic liquid crystal (TLC) technique is used
to measure the surface effectiveness. The k-omega SST model is used in CFD simulation. The grid convergence
index (GCI) method is used for the grid refinement study. The parametric variations considered are: (i) the blowing
ratio is from 0.6 to 1.6; and (ii) two plate materials with lower (0.2 W/m K) and higher (14.9 W/m K) thermal
conductivity. A good agreement of effectiveness distribution on the surface is found between the measured and
the conjugate calculation. The results are explained through various flow features observed: jet lift off, counter
rotating vortex pair, downstream spiral separation node, side spilled vortex interaction, interaction of upstream
and downstream hole in the staggered arrangement, shearing between jet and mainstream etc. In case of lower
conducting material, local patches of higher effectiveness are observed close to jet exit but are found to reduce
with distance. For higher conducting material the effectiveness values are lower but uniform across the plate. A
comparison between film cooling and impingement cum film cooling indicates that the steady state temperature
value for the combined cooling is lower. Besides, due to the inclusion of impingement jet, conduction becomes
dominant and leads to a more uniform plate temperature. Further, it is observed that the fluctuations induced by
the impinging jet are dissipated as it comes out through the film hole.
Skills :
Programming language: C, C++
Engineering Software: Matlab, Fluent, Gambit, Unigraphix,AutoCAD, ICEM CFD, CFX, SOLID Works
Communication Language : English, Hindi and Oriya
Research interests :
Gas Turbine Blade Cooling
Turbomachines
Computational Fluid Dynamics
Areas of interest : Heat transfer, Gas Turbine, Turbomachines, CFD
Publications/Conferences :
1. Rajesh Kumar Panda, B.V.S.S.S. Prasad, 2011, "CONJUGATE HEAT TRANSFER FROM A FLAT PLATE
WITH SHOWER HEAD IMPINGING JETS", Frontiers in Heat and Mass Transfer (FHMT), Vol. 2, 013008,
DOI: 10.5098/hmt.v2.1.3008
1. Rajesh Kumar Panda and B.V.S.S.S. Prasad, вЂњComputational and Experimental Study of Conjugate Heat
Transfer for a Flat Plate with Impinging JetвЂќ, ASME-Turbo Expo 2010, Paper id: GT 2010-22572, June
14-18, 2010, Glasgow, UK.
2. Rajesh Kumar Panda, Sreekala P. and B.V.S.S.S. Prasad, "Computational and Experimental Study of
Conjugate Heat Transfer for a Flat Plate with shower Head Impinging Jets", asme-International Heat
Transfer Conference (IHTC-14), Paper id: IHTC14-23188, August 8-13, 2010, Washington D.C., USA.
3. Rajesh Kumar Panda and B.V.S.S.S. Prasad, вЂњStudy of fluid flow on a flat plate with shower head
impinging jetsвЂќ, Thirty seventh International Conference on Fluid Mechanics and Fluid Power, Paper id:
561, December 16-18, 2010, IIT Madras, Chennai, India.
4. Rajesh Kumar Panda and B.V.S.S.S. Prasad, вЂњFlow Visualization and Conjugate Heat Transfer Study
From Shower Head Impinging JetsвЂќ, ASME-Turbo Expo 2011, Paper id: GT2011- 45098,June6-10,2011,
Vancouver, Canada
5. Rajesh Kumar Panda, Sudheer Kumar, B.V.S.S.S. Prasad, "Conjugate Heat Transfer From a Flat Plate
With Different Film Cooling Configurations", 21st National & 10th ISHMT-ASME Heat and Mass Transfer
Conference, Paper id: ISHMT_IND_03_013, December 27-30, 2011, IIT Madras, India.
6. Rajesh Kumar Panda, B.V.S.S.S. Prasad, Conjugate Heat Transfer From A Flat Plate With Combined
Impinging And Film Cooling, ASME-Turbo Expo 2012, Paper id: GT2012-68830, June 11-15, 2012,
Copenhagen, Denmark
About me :
To optimally utilize my problem solving skill, leadership and interpersonal skills and a passion to work in a
challenging and creative environment and effectively contribute towards the goals of the organization. This will
help me find a strategic fit between my internal strengths and the organizational opportunities and leveraging
them to herald a new growth story for the organization.
Education :
M.Tech, 2007-2009, Mechanical Engineering/Thermal Engineering, Indian Institute of Technology, Madras
B.Tech, 2003-2007, Mechanical Engineering, GIETGunupur/BPUT, ORISSA
E-mail id : rajesh.panda43@gmail.com
Rayapati Subbarao
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : PROF. M.GOVARDHAN
Title of thesis : Computational studies on counter rotating turbines
Thesis abstract : Objective of this work is to generate a computational model and carry out the flow and
performance analysis using CFD. ICEMCFD and CFX are used for geometry preparation, meshing, solving and
post processing. Analysis is done by varying geometrical and flow parameters like spacing between blade rows,
specific speed, angle of incidence, speed ratio etc. Comparison is done in the aspect of flow development and
performance.
Research interests :
Turbomachinery, Counter Rotating Turbines
Areas of interest : Turbomachinery, Counter Rotating Turbines, Axial Flow Machines, Combined Cycle Power
Plants, Fuel Cells, SOFC-GT, Power Plant Cycles, Alternative Fuels
Publications/Conferences :
INTERNATIONAL JOURNALS:
1. вЂ�Mathematical modeling of incorporated Physico-Electrochemcial processes and polarization
distinctiveness in Solid Oxide Fuel CellsвЂ™, V.U.Senthil Vadivel, Rayapati Subbarao,
P.M.V.Subbarao, AMSE periodical, 2006, vol.1, pp. 78-89.
2. вЂ�Performance Analysis of Hybrid Solid Oxide Fuel Cell вЂ“ Gas Turbine Power Generating SystemвЂ™
Rayapati Subbarao, V.U.Senthil Vadivel, P.M.V.Subbarao, Journal of Institution of Engineers, 2009,
vol.90, pp. 1-5.
3. вЂ�Experimental investigation and performance evaluation of DI Diesel engine fueled by waste oil-diesel
mixture in emulsion with waterвЂ™, K.Nantha Gopal and Rayapati Subbarao, Journal of Thermal Science,
2009, vol. 13(3), pp. 83-89.
4. вЂ�Experimental Investigation on the Performance and Emission Characteristics of Two-Stroke Spark Ignition
Engine with Hydrogen as Supplementary FuelвЂ™, K.Nantha Gopal, Rayapati Subbarao, R.Natarajan, Sanjay
Jain, Fulender K and Ram Vinoy K, Journal on Future Engineering & Technology, 2009, vol.4(4), pp.
22-28.
5. вЂ�Thermodynamic analysis on Diesel Engine Integrated with PCM Based Energy Storage SystemвЂ™,
K.Nantha Gopal, Rayapati Subbarao, V. Pandiyarajan, R. Velraj, Journal of Thermodynamics, 2010, vol.
13(1), pp. 15-21.
6. 'Hydrogen enriched Compressed Natural Gas (HCNG) - A Futuristic fuel for internal combustion
enginesвЂ™, K.Nantha Gopal, Rayapati Subbarao, T.Elango, P.Bhaskar and K.Annamalai, Journal of
Thermal Science, 2011, vol. 15(4), pp. 1145-1154.
7. вЂ�Effect of axial gap on the aerodynamics of a single stage turbineвЂ™, Rayapati Subbarao and
M.Govardhan, Journal of Earth Sciences and Engineering, 2012, vol 1, pp:371-377.
INTERNATIONAL CONFERENCES:
8. вЂ�Mass Flow Measurement in Buoyancy Induced Flow through a vertical TubeвЂ™ Sangeeta Kohli, M.R.Ravi,
R.Subbarao (Proceedings of the 5th ASME-ISHMT Heat & Mass Transfer Conference, Calcutta, pp.
796-801, 2002).
9. вЂ�Performance characteristics of Solid Oxide Fuel Cell and its upstream fuel processing optionsвЂ™, Senthil
Vadivel, Rayapati Subbarao, P.M.V.Subbarao (Proceedings of the International conference on
Sustainable Energy Development, New Delhi, pp. 256-265, 2006).
10. вЂ�Thermodynamic modelling of Solid Oxide Fuel Cell вЂ“ Gas Turbine power plantвЂ™, Rayapati Subbarao,
Senthil Vadivel, P.M.V.Subbarao, (Proceedings of the International Congress on Renewable Energy
(ICORE), Hyderabad, pp. 531-538, 2006).
11. вЂ�Mathematical modeling of incorporated Physico-Electrochemcial processes and polarization
distinctiveness in Solid Oxide Fuel CellsвЂ™, V.U.Senthil Vadivel, Rayapati Subbarao, P.M.V.Subbarao
(Proceedings of the International Conference on Modelling and Simulation, Kuala Lumpur, pp. 771-778,
2006).
12. вЂ�Performance Analysis of Hybrid Solid Oxide Fuel Cell вЂ“ Gas Turbine Power Generating SystemвЂ™
Rayapati Subbarao, V.U.Senthil Vadivel, P.M.V.Subbarao (Proceedings of the World Renewable Energy
Congress - IX, Italy, 2006).
13. вЂ�Mathematical Modelling of Activation Overpotential in High Temperature Fuel CellsвЂ™, Rayapati Subbarao,
V.U.Senthil Vadivel, P.M.V.Subbarao (Proceedings of the 3rd BSME-ASME International Conference on
Thermal Engineering, 2006, Dhaka, Bangladesh).
14. вЂ�Effect of axial gap on the aerodynamics of a single stage turbineвЂ™, Rayapati Subbarao and M.Govardhan
(Ms-48, Proceedings of the International Conference on Recent Advances & Challenges in Energy, India,
2012).
15. вЂ�Effect of axial gap on the aerodynamics of 1 and 1.5 stage turbines', Rayapati Subbarao and
M.Govardhan (73, Proceedings of the 15th International Conference on Applied Mechanics and
Mechanical Engineering, AMME-15, Egypt, 2012).
16. "Effect of axial spacing between the components on the performance of a counter rotating
turbine', Rayapati Subbarao and M.Govardhan (Proceedings of ISFMFE, Korea, 2012).
NATIONAL CONFERENCES:
вЂ�Effect of axial gap on the aerodynamics of a one and half stage turbineвЂ™, Rayapati Subbarao and
M.Govardhan, TM-07, Proceedings of the 38th National Conference on Fluid Mechanics and Fluid Power (FMFP)
, India, 2011.
About me :
I am Rayapati Subbarao with 10+ years of experience in Research & Development, Teaching and Training.
Presently, pursuing Ph.D from IIT Madras in the area of вЂ�Counter Rotating TurbinesвЂ™. My previous
employers include IIT Delhi, VIT University, BIT and HiTec Info,USA. I have about 17 publications as on
date and more to follow in the areas of Turbines, Power generation, IC engines, Alternative fuels and Fuel
cells. My experience also includes Certification work like ABET, USA and NBA, NAAC of India and
Training & Placement and Counselling of students. Apart from Teaching and R&D, I have also been
involved involved conducting workshops/conferences, preparation of course materials and lab handouts.
My interest has always been to serve the organization to which I am associated with/country in the best
position available. I am Member of Institution of Engineers, India. Also, actively associated for my life
term with Combustion Institute, FMFP and ISTE.
Education :
Ph.D (Thermal Turbomachinery) from IIT Madras (From 2009)
M.Tech (Thermal Engineering) from IIT Delhi (CGPA 8.25) in 2006
B.Tech (Mechanical Engineering) from Nagarjuna University in 1996
E-mail id : rsubbarao@hotmail.com,subbaraorayapati@gmail.com
S Rajkumar
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. Pramod S Mehta and Dr. Shamit Bakshi
Title of thesis : Phenomenological Modeling of Multiple-injection Common Rail Direct Injection (CRDI) Diesel
Engines
Thesis abstract : Multiple-injection is known to achieve simultaneous reduction of NOx and soot emissions which
are the major pollutants of diesel engines. However, the simultaneous reduction of NOx and soot requires an
optimal injection schedule suiting an engine load and speed operating conditions. Arriving an optimal injection
schedule through extensive experiments is tedious and expensive and hence an attempt has been made to
develop phenomenological for predicting combustion and emission characteristics of multiple-injection common
rail diesel engines. The detailed physics involved in the spray, mixing, combustion and emission processes of
multiple-injection technique are explored through the model. The model is validated with a wide range of
experimental results. Parametric studies are carried out to analyze the effect of fuel quantities in each pulses and
dwell period between the injection pulses on combustion, NOx and soot particulate emissions and specific fuel
consumption.
Skills :
C, C++, Visual Basic and ASP
Matlab
Exposure to Gambit
Star CD [CFD software]
Research interests :
1. Phenomenological modeling of engine combustion and emission processes
2. Alternate fuels
3. Engine testing
4. CFD
Areas of interest : IC Engines, Alternative Fuels, Modeling and Simulaion
Publications/Conferences :
1. Rajkumar, S. and Nagarajan, G. CFD modeling of combustion and emission characteristics of
Homogeneous Charge Compression Ignition Engine. SAE INDIA International Congress and Exposition
2005, Chennai, October 2005.
2. Rajkumar, S. and Nagarajan, G. Modeling of combustion and emission characteristics of Homogeneous
Charge Compression Ignition engine using CFD. 19th National Conference on IC Engines and
Combustion, Chidambram, December 2005.
3. Rajkumar, S., Mehta, P.S., and Bakshi, S. Predicting mixing rates in multiple injection CRDI engines,
ASME Internal Combustion Engine Division 2009 Fall Technical Conference, 2009, Paper No.
ICEF2009-14081.
4. Rajkumar, S., Mehta, P.S., and Bakshi, S. Parametric Investigation for NOx and Soot Emissions in
Multiple-injection CRDI Engine using Phenomenological Model, 2011 JSAE/SAE International
Powertrains, Fuels and Lubricants, 2011, Paper No. JSAE 20119210 (SAE 2011-01-1810).
5. Rajkumar, S., Mehta, P.S., and Bakshi, S. Modeling Spray Processes in High Pressure Multiple-injection
CRDI Engines,22nd National Conference on IC Engines and Combustion, 2011, Paper No. 3-005
(Awarded as the best paper).
6. Rajkumar, S., Mehta, P.S., and Bakshi, S. Phenomenological Modeling of Combustion and Emissions for
Multiple-injection CRDI Engines. International Journal of Engine Research, 13(4), 2012, pp. 307-322.
7. Mehta, P.S., Rajkumar, S., and Bakshi, S. Modeling of Spray and Mixing Processes in High Pressure
Multiple-injection CRDI Engines, The Eight International conference on Modeling and Diagnostics for
Advanced Engine Systems (COMODIA) , 2012, Paper No. SP-08.
About me :
To reach greater heights in career integrating my personal goals with that of the organization.
Open to exploring new avenues and yearning to learn new concepts and technology.
Good interpersonal skills
Education :
B.E. Mechanical Engineering, 1990-1994, Bharathidasan University
M.E. Internal Combustion Engineering, 2002-2005, Anna University
E-mail id : srkumar.iitm@gmail.com
Somasundaram D
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof.A.Mani and Prof.M.Kamaraj
Title of thesis : Studies on Heat and Fluid Flow Characteristics of Flat Heat Pipe
Thesis abstract : The application of heat pipe as a heat transport device for thermal management of electronic
systems and devices is an important area of research and development. Present research work deals with threedimensional computational fluid dynamics (CFD) analysis on thermal and hydro dynamic characteristics of flat
heat pipe with copper foam as wick. Multiphase mixture model is applied to study the two-phase flow physics
taking place inside the flat heat pipe. The user defined functions are developed and coupled with governing
equations of mixture model to enable evaporation and condensation process. Experimental work has been carried
out to validate the numerical model.
Skills/Abilities
CFD Package
Post Processor
Programming Language
Modeling Package
Operating systems
: FLUENT, GAMBIT, Ansys
: SigmaPlot, Tecplot
: C, C++
: Auto CAD, Pro-E
: Windows XP, 7 Professional
Research interests :
Heat Transfer, Fluid Mechanics, Computational Fluid Dynamics, Thermodynamics.
Areas of interest : CFD, Heat transfer in heat pipes, thermodynamics, Fluid flow
Publications/Conferences :
International Conferences:
1. Somasundaram, D., and Mani, A., вЂњExperimental Studies on Porous Wick Flat Plate Heat PipeвЂќ,
International Refrigeration and Air Conditioning Conference at Purdue, USA, July 12-15, 2010.
2. Somasundaram, D., Mani, A, and Kamaraj, M., вЂњHeat Pipes Application in Electronic CoolingвЂќ,
International Conference on 4G Wireless Computer Networks, India, March 4, 5&6, 2011.
3. Somasundaram, D., Mani, A, and Kamaraj, M., вЂњMetal Foam Wick Structure for Heat Pipe ApplicationsвЂќ,
Annual International Conference on Materials Science, Metals and Manufacturing (M3 2011), Singapore,
December 12-13, 2011.
4. Somasundaram, D., Mani, A, and Kamaraj, M., вЂњNumerical analysis of thermal performance of flat heat
pipeвЂќ, International Refrigeration and Air Conditioning Conference at Purdue, USA, July 16-19, 2012.
About me :
I am a PhD research scholar in Mechanical Engineering having good experience in industry and in depth
knowledge in subjects with vast computer skills to face future challenges.
Education :
M.E in Energy Engineering, (8.45 CGPA), 2001-2003, PSG College of Technology, Coimbatore.
B.E in Mechanical Engineering, (74.1%), 1995-1999, Institute of Road and Transport Technology, Erode
E-mail id : soms.iitm@gmail.com
Srinivasa Ramanujam
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Dr. C. Balaji
Title of thesis : RETRIEVAL OF GEO-PHYSICAL PARAMETERS FROM MICROWAVE RADIANCES
Thesis abstract : Developing algorithms for retrieval of geo-physical parameters (vertical cloud and rain
structure) from remote measurements of microwave radiances emerging out of a raining atmosphere was
considered as the research goal for my Ph.D thesis. Estimation of rain rate from the retrieved vertical rain
structure as well as its prediction from numerical weather models that assimilate radiances from satellites is
critical for agrarian economies like India. The estimation of surface rain rate will also help in forecasting flood and
other related natural calamities, which can help save several thousands of humans and live stocks from drowning.
The numerical weather research and forecast (WRF) model generated thermodynamic and atmospheric
parameters are simulated for various cyclone events originated in north Indian Ocean region. These parameters
are fed as input to the in-house FORTRAN code that simulates brightness temperatures in the microwave region
as output. The WRF model generated input, the in-house model simulated brightness temperatures and observed
microwave brightness temperatures from a space borne radiometer are judiciously combined in a Bayesian
framework to retrieve a three dimensional cloud and rain structure of the earthвЂ™s raining atmosphere.
Skills :
Programming Languages: C, FORTRAN
Scientific computing Language: MATLAB
Operating Systems: Windows, Linux
Specialized softwares: Quickbeam (Radar reflectivity simulator), WRF (numerical weather model), PRTE (inhouse polarized radiative transfer equation solver)
Research interests :
Artificial Neural Networks
Bayesian inference
Inverse problems in engineering
Microwave remote sensing
Non-linear optimization
Radiative transfer through participating media
Areas of interest : rainfall estimation, satellite remote sensing, multi-parameter estimation, artificial neural
networks, numerical weather modelling, radiation in participating media
Publications/Conferences :
Journal publications:
Ramanujam K.S, Abishek S, and Katte S.S, "Differential View Factor for a Rectangle with Intervening
Parallelepiped or Sphere", Journal of Thermophysics and Heat Transfer, Vol. 20, 2006, pp. 604-607.
Abishek S, Ramanujam K.S and Katte S.S,"View Factors between Disc/Rectangle and Rectangle in Parallel and
Perpendicular Planes", Journal of Thermophysics and Heat Transfer, Vol. 21, 2007, pp. 236-239.
Ramanujam K.S and Balaji C, "Radiative Transfer Simulations for the MADRAS Imager of Megha-Tropiques",
Journal of Earth System Science, Vol. 120, 2011, pp. 1-18.
Ramanujam K.S, Chandrasekar R and Balaji C, "A new PCA-ANN algorithm for retrieval of rainfall structure in
precipitating atmosphere", International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 21, Issue 8,
2011, pp. 1002-1025.
Ramanujam K.S, Chandrasekar R, Subramani D and Balaji C, "On the Effect of Non-Raining Parameters in
Retrieval of Surface Rain Rate Using TRMM PR And TMI Measurements", IEEE Journal of Selected Topics in
Applied Earth Observations and Remote Sensing, Vol. 5, Issue 3, 2012, pp. 735-743.
Praveen K, Ramanujam K.S and Balaji C, "An Artificial Neural Network Based Fast Radiative Transfer Model for
Simulating Infrared Sounder Radiances", Journal of Earth System Science, Vol. 121, Issue 4, 2012, pp. 891-901.
Ramanujam K.S, Subramani D, Balaji C and Chandrasekar V, "A WRF-Radar-Radiometer Combined Algorithm
For MADRAS Imager Of MeghaTropiques", IEEE Transactions on Geoscience and Remote Sensing,
(communicated).
Conference publications:
Balaji C, Ramanujam K.S, Venkateshan S.P, Gairola R.M, Sarkar A and Agarwal V.K, "A Neural Network based
Fast Forward Model for the Simulation of Microwave Brightness Temperatures", International Conference on
MEGHA-TROPIQUES Science and Applications, ISRO, Bangalore, 2009, pp. 64-65.
Ramanujam K.S and Balaji C, "A New Rain Screening Algorithm Based on Non-Dimensional Microwave
Brightness Temperatures", International Conference on MEGHA-TROPIQUES Science and Applications, ISRO,
Bangalore, 2009, pp. 66-67.
Balaji C, Chaturvedi M, Ramanujam K.S, Chandrasekar V, Nguyen C and Martinez M, "What Is The Information
Content Of TRMM Precipitation Radar For Determining Radiometer Observations And Vice Versa?", IEEE
International Geoscience and Remote Sensing Symposium, Hawaii, USA, 2010.
Ramanujam K.S and Balaji C, "A Fast Polarized Microwave Radiative Transfer Model for a Raining Atmosphere",
International Heat Transfer Conference (IHTC-14), Washington DC, USA, 2010.
Balaji C and Ramanujam K.S, "Retrieval of rainfall from MADRAS Microwave Imager on Megha Tropiques", IEEE
International Geoscience and Remote Sensing Symposium, Vancouver, Canada, 2011.
Ramanujam K.S, Subramani D and Balaji C, "Profile Correction Algorithm using TRMM PR and TMI
measurements in a Bayesian framework", Opportunities and Challenges in Monsoon Prediction in a Changing
Climate, OCHAMP, Indian Institute of Tropical Meteorology, Pune, 2012.
About me :
Srinivasa Ramanujam received B.E degree in Mechanical Engineering from Madras University in 2003, Master of
Science (in Engineering) from SASTRA University in 2008 and Ph.D in Mechanical Engineering from IIT Madras
in 2012. His current area of research is developing improvements to rainfall estimation using neural networks.
Education :
B.E Mechanical Engineering, 1999-2003, Madras University
M.S (in Engineering) by Research Mechanical Engineering, 2006-2008, SASTRA University
Ph.D Mechanical Engineering, 2008-2012, IIT Madras
E-mail id : sramanujam.k@gmail.com
Tapano Kumar Hotta
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Prof. S P Venkateshan & Prof. C Balaji
Title of thesis : Studies on Cooling of Discrete Heated Elements in an Application to Electronic Cooling Industries
Thesis abstract : The main objective is to find the optimal distribution of discrete heat sources (Aluminum)
mounted on a substrate board (Bakelite) loosing heat by convection, and radiation. The discrete heat sources are
the individual heated elements mounted on the mother board of a computer, or on the printed circuit board (PCB)
of any electronic devices. For the present case the PCB (Actually made of FR4) is mimicked by a low thermal
conductivity material, Bakelite, and the chips or heat sources mounted on the PCB (Actually made of Silicon) are
by Aluminum. The optimal configuration is one for which the maximum temperature excess among heat sources
(temperature difference between the heat sources, and ambient) is minimum among all other possible
configurations, which is determined by a non-dimensional geometric parameter '?'. Experiments have been
conducted for both square (identical), and rectangular (non-identical) protruding discrete heat sources, which are
five in number, subjected to uniform heat flux, under natural and mixed convection heat transfer. The effect of
surface radiation on these heat sources has been studied by painting them with black paint. It has been found
that, radiation plays an important role for the cooling of discrete heated elements, as there is a temperature drop
upto 15%, which helps in better cooling. The number of possible configurations for arrangement of both square,
and rectangular heat sources on substrate board is determined by a MatLab programme. Experiments have been
conducted for some of the configurations (choosen on the basis of '?' value) at different power levels and for
polished and black painted surfaces. These experimental data are used as a forward model to Artificial Neural
Network (ANN), which is then coupled with Genetic Algorithm (GA) to determine the global optimal position of
discrete heat sources, for which the maximum temperature excess is minimum among all possible configurations
of heat sources. This optimal configuration is then experimentally validated, and it has been found that, the
maximum temperature excess in both the cases agree with each other with an error band of 1.5%. Flow
visualization study has been carried out by using Schlieren and Shadowgraphy technique,to study the interaction
between discrete heat sources. This whole idea suggests some guidelines for the design of electronic devices,
and helps in better thermal management.
Skills :
Good in experiments
Optimization by using Artificial Neural Network (ANN) and Genetic Algorithm (GA)
Numerical simulations by using Fluent and Comsol
MatLab programming
Research interests :
Cooling of discrete heat sources
Thermal management of electronic devices
Optimal distribution of discrete heat sources loosing heat by convection and radiation
Flow visualization studies by using Schlieren and Shadowgraphy technique
Interaction of conduction and convection with surface radiation heat transfer
Areas of interest : Electronic Cooling, Thermal Management of Electronic Devices, Flow Visualization Studies,
Optimization of thermal systems, Interaction of natural and mixed convetion heat transfer with surface radiation
Publications/Conferences :
Tapano Kumar Hotta, S P Venkateshan, вЂњNatural and Mixed convection heat transfer cooling of discrete
heat sources placed near the bottom on a PCBвЂќ, International Journal of Mechanical and Aerospace
Engineering, Vol 6 2012, Page No 266.
Tapano Kumar Hotta, Pullarao Muvalla, S P Venkateshan, вЂњEffect of surface radiation on the optimal
distribution of discrete heat sources under natural convectionвЂќ, Heat and Mass Transfer - Springer.
(Available online)
Tapano Kumar Hotta, Pullarao Muvalla, S P Venkateshan, вЂњOptimal distribution of discrete heat sources
under natural convection using ANN coupled with GAвЂќ, Heat Transfer Engineering - Taylor and Francis.
(Under Review)
Tapano Kumar Hotta, A Sneha Reddy, S P Venkateshan, вЂњExperimental studies on optimization of
natural convection heat transfer from protruding discrete heat sourcesвЂќ, National seminar on recent trends
in engineering, VITAM Engineering college, Orissa, India, 6th October 2010.
Tapano Kumar Hotta, S P Venkateshan, вЂњNatural convection heat transfer from protruding discrete heat
sourcesвЂќ, 21st National and 10th ISHMT- ASME Heat and Mass Transfer Conference, IIT Madras, India,
27 - 30st December 2011.
Tapano Kumar Hotta, S P Venkateshan, вЂњNatural and Mixed convection heat transfer cooling of discrete
heat sources placed near the bottom on a PCBвЂќ, International Conference on Fluid Mechanics, Heat
Transfer and Thermodynamics (ICFMHTT), Zurich, Switzerland, January, 15 - 17, 2012.
About me :
I am Tapano Kumar Hotta aka Tapan, a research scholar (PhD) from HTTP Laboratory, Department of
Mechanical Engineering since January 2010. I belong to Berhampur, Orissa (Presently Odisha). My research
interest includes in broad sense Electronic cooling, Thermal management of electronic devices, Flow visualization
studies, Optimization of thermal systems, Interaction of natural and mixed convection heat transfer with surface
radiation. I have a keen interest towards teaching, and have worked for around 5 years before joining the PhD
programme. I love reading novels and playing cricket during my leisure time. It's been a great pleasure being a
part of IIT Madras over the years.
Education :
H.S.C.E (10th ) from B.S.E Orissa, in 1998 with 83.33%.
H.S.E (10+2) from C.H.S.E, Orissa, in 2000 with 77.22%.
B-Tech in Mechanical Engineering from JITM, Paralakhemundi, under BPUT, Rourkela, Orissa, in 2004 in
First class (H) with 75.66%.
M-Tech in Thermal Engineering from ITER, Bhubaneswar, under Siksha вЂ™OвЂ™ Anusandhan (SOA)
University, Bhubaneswar, Orissa in 2009 in First class (H) with a CGPA of 8.96.
Pursuing PhD in Heat Transfer and Thermal Power Laboratory of Department of Mechanical Engineering,
IIT Madras in the area of Cooling of discrete heat sources in an application to electronic industries, since
December 18' 2009.
E-mail id : tapanhota@gmail.com
Thangaraja J
Doctor of Philosophy (PhD)
Department of Mechanical Engineering
Guide : Pramod S Mehta
Title of thesis : NOX REDUCTION IN BIO-DIESEL FUELED COMPRESSION IGNITION (CI) ENGINE
Thesis abstract : Biodiesel has been receiving considerable attention for its potential use as an alternative fuel to
petroleum diesel. The properties of biodiesel are close to the petroleum diesel and its use in diesel engines
provide significant reduction in particulates and to some extent of unburned hydrocarbon, carbon monoxide and
net carbon dioxide emissions. The biodiesel fuels, however, have a cold flow characteristics, lower heating value,
lower storage stability, some what poor atomization due to slightly higher viscosity and higher emissions of
nitrogen oxides (NOx)]. The increased NO emission from biodiesel fuels restrict their widespread use, as the NOx
emissions lead to the formation of ozone and photochemical smog when reacting with hydrocarbons in the
presence of sunlight. The realization of these severe effects of engine exhausts NOx emissions brought the
aspects of understanding the biodiesel-NOx penalty and NOx emission control to the forefront and drives the
changes in biodiesel fuelled CI engines. The present research work envisages an experimental investigation on
biodiesel operation of the engine for determining an appropriate injection timing and exhaust gas recirculation to
provide the required engine performance and emission levels.
Skills :
Pro active
perseveranc
Team facilitator
stimulator
Research interests :
Alternate Fuels
Engine Exhaust Emission Control
Engine Tuning
Emission Testing according to Standards
Areas of interest : Engine Exhaust Emission studies and control
Publications/Conferences :
Presented a paper titled, вЂњAccurate Estimation of Indicated Mean Effective Pressure in a Diesel Engine using
Performance TestвЂњ in the Proceedings of the 22nd National Conference on IC Engines and Combustion, NITCalicut, Kerala, India: 10-13 December, 2011.
Presented a Paper titled, вЂњExperimental investigations on combustion, performance and emission characteristics
of neat Jatropha biodiesel and its methanol blend in a diesel engineвЂќ in the Proceedings of the 2012 Fall
Technical Conference of the ASME Internal Combustion Engine Division, Vancouver, Canada, 23-26 September,
2012.
Poster presentation at IISc Bangalore about the biodiesel research in IIT Madras
About me :
I was born in southern part of tamilnadu on 10.10.1984.
My father ( Dr.T.Jeyaseelan) is a doctor and mother (J Thangamani) is a housewife
I was curious to know the things and truth around me, so i am pursuing my dreams through my own education
and degress.
Education :
M.E. in Internal Combustion Engineering from College of Engineering, Guindy, Anna University, Chennai
B.E in Mechanical Engineering from Karunya Institute of Technology, Coimbatore, Tamilnadu
E-mail id : jtraja@gmail.com
A Kiran Kumar
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr Krishna Kannan
Title of thesis : Computational micro mechanics of composite materials
Thesis abstract : Computational micro mechanics plays an important role in the research of advance engineering
material such as composites. Representative volume element (RVE) approach is used to predict the elastic
properties as well as the local distribution of the stress associated with in the fiber reinforced composites. The
accuracy of prediction of stress in the micro level depends on accuracy of the local morphology of the micro
structure. Nearest Neighbour algorithm (NNA) is used to generate the random fiber in a RVE. ABAQUS is used to
simulate macro mechanical and micro mechanical behavior of composite materials. The main objective of
simulation is to predict the mechanical properties of the composite material and to predict the probability of
interfacial failure.
Skills :
ABAQUS, Matlab, python, catia V5 Elfini, Patran, Nastran, Hypermesh
Research interests :
Composites, constitute modeling, Finite element analysis, computational micro mechanics, multiscale modeling
Areas of interest : Aerospace
Education :
MS Mechanical Engineering 2010-2012, IIT madras
B.Tech Mechanical Engineering 2002-2006, S V C E T chittoor,JNTU hyderabad
E-mail id : kirankumardhage@gmail.com
Alwan V
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. Seshadri sekhar A
Title of thesis : Design, Development and Dynamic Analysis of shafts made with different Composite Materials
Thesis abstract : Design and dynamic analysis of composite shafts is the primary objective of this work. Shafts
are studied for its dynamic characteristics. Finite element methods and experimental methods are used for the
study. Shafts modeled with Glass/epoxy and carbon/epoxy composite materials are used for the study. The
influence of materials, angular orientation and stacking sequences on the bending and torsional natural frequency
of composite shafts are studied. The influence of thickness of the fiber layer on the dynamic characteristics is
studied. Hybrid shafts are modeled, studied and the properties are compared with the normal shafts. An empirical
relation to identify better optimized shaft with low cost and improved performance has been developed. Shafts are
manufactured and their properties are experimentally assessed. The torque transmission characteristics of
various shafts are studied. Shafts are manufactured by introducing nano fillers and their properties are observed.
Skills :
Programming
вЂ“ MATLAB, MATHEMATICA
Modeling and analysis
вЂ“ CATIA, SOLIDWORKS, HYPERMESH, ANSYS, ABAQUS
Data acquisition programs вЂ“ DEWESOFT, RTPRO FOCUS
Research interests :
Composites
Vibration
Areas of interest : composites, Solid Mechanics, Vibration
Publications/Conferences :
1. Alwan, V., Sekhar, A. S., and Velmurugan, R., вЂњDynamic analysis and damage studies on non-rotating
composite shaftsвЂќ, presented at International Conference on Theoretical Applied Computational and
Experimental Mechanics, IIT Kharagpur, ICTACEM paper No. CCXI, 2010.
2. Alwan, V., Ankit Guptha., Sekhar, A. S., and Velmurugan, R., вЂњDynamic analysis of shafts of composite
materialsвЂќ, Journal of reinforced plastics and composites, November 2010.
3. Ankit Guptha., Alwan, V., Sekhar, A. S., and Velmurugan, R., вЂњVibration analysis of shafts of composite
materialsвЂќ, Journal of Sound and Vibration, 1974, 37(1), pp.1-15.
4. Alwan, V., Sekhar, A. S., and Velmurugan, R., вЂњMechanical characterization of carbon epoxy
compositesвЂќ, presented
About me :
I completed my under gradution in December 2007 in Aeronautics. I Worked in NAL, bangalore for few months
after graduation. Following that, I joined IIT Madras to work in a research project sponsored by AR&DB. I joined
MS in January 2010 and in the final stages of my work .
Education :
1. (Graduation)M.Ae.S.I - The Aeronautical Society of India, New Delhi, 59.6%, 2007.
2. (Higher secondary)XII - Merit Matriculation Higher Secondary School, Ambasamudram, 84.67%, 2001.
3. (Matriculation)X - Merit Matriculation Higher Secondary School, Ambasamudram, 86.9%, 1999.
E-mail id : alwan47@gmail.com
Athi Sankar P
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Shankar Krishnapillai
Title of thesis : Identification of Elastic Constants of Composite Plate Using Response surface methodology
Thesis abstract : The purpose of this work is to obtain the elastic constants of composite material by analyzing
its dynamic response. Thin orthotropic plate was taken and its response for the impact force was observed in both
time and frequency domain. Finite element model that reflects the actual system properties are developed. The
response of the system for an initial range of input values was predicted using the finite element model. The
difference between the experimentally measured and theoretically predicted responses is counted as error. The
error is minimized by updating finite element model. The procedure is applied to the plate bending problems and
the experiments are simulated numerically with known parameters of the material
Skills :
MATLAB
Research interests :
Optimization
Composite identification
Vibration
Finite element Analysis
Areas of interest : Mathematical Modeling, Finite element analysis and optimization, Mechanical Vibration,
Composite Materials
Publications/Conferences :
0. Athi Sankar P. and Shankar, K. "Identification of Elastic Constants of an Isotropic Plate Using
Response Surface Methodology in Time Domain". Fifth International conference on advances in
mechanical engineering, Jun 2011.
0. Athi Sankar P. and Shankar, K. Inverse identification of material constants of orthotropic plate
using response surface methodology in time domain. International Conference on Emerging Trends in
Engineering and Technology, August 2012.
About me :
Self motivated
Education :
B.E Mechanical Engineering,2002-2006, Noorul Islam College Of Engg, Anna University Chennai
E-mail id : athishankaran@gmail.com
B V S S Bharadwaja
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : N. SIVA PRASAD
Title of thesis : A STUDY OF NOISE RADIATION BY TIRE ACOUSTIC CAVITY
Thesis abstract : Noise levels in urban aresa are touching peak levels due to high traffic density. Its no wonder to
say that the contribution of tire is about 30% on the whole noise produced by the vehicle. So, its very important to
study the noise emission mechanisms in deterministic manner. Tire noise is broadly divided into two types, Air
borne noise and Structure borne noise. we are mainly concentrating on influence of factors viz.., inflation
pressure, static preload, temperature, rolling speed etc. on the tire acoustic cavity. For this we are modelling and
analyzing tire with air using ABAQUS .
Skills :
Finite element package: Abaqus, Ansys, HyperMesh
Modeling Software : Pro-E
Research interests :
NOISE VIBRATION HARSHNESS (NVH)
FINITE ELEMENT ANALYSIS (FEA)
Areas of interest : NVH, FEA
About me :
I am a person who is always ready to accept challenges in my life, because that is the time where we can learn
and improve ourself.My hobbies are playing chess and watching TV. I believe in hard work.
Education :
M.S Mechanical engineering,2011-2013, IIT Madras
B.Tech Mechanical Engineering, 2006-2010, Bapatla Engineering College
E-mail id : bvss89@gmail.com
Bhupesh Verma
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Prabhu Rajagopal
Title of thesis : Studies on the influence of axial bends on low frequency ultrasonic guided waves in hollow
cylinders (pipes)
Thesis abstract : Ultrasonic guided waves in hollow cylinders (pipes) are today widely applied as rapid screening
tools in the inspection of straight pipe segments in oil, power generation and petrochemical processing industries.
However, the characteristics of guided wave propagation across features such as bends in the pipe network are
complicated, hampering a wider application of the developed techniques. Although a growing number of studies in
recent years have considered guided wave propagation across elbows and U-type bends, the topic is still not very
well understood for a general bend angle ?, mean bend radius R and pipe thickness b.The objective of this work is
to study the influence of axial bends on low frequency ultrasonic guided waves in hollow cylinders (pipes). Here
we use 3D Finite Element (FE) simulation to illumine the propagation of fundamental guided pipe modes across
bends of several different angles ?. Also the reflection and transmission characteristics of bends were studied, in
order to differentiate them from effect due to possible defect in the bend region. FE models were validated
through experiments and analysis.
Skills :
Design and Analysis Tools: Abaqus v6.11, Ansys , ProE WF v4, UniGraphics NX4,
Programming Tools: MATLAB
AutoCAD
Research interests :
Finite Element Modeling and Analysis
Guided Ultrasonic Wave techniques for Non-destructive Evaluation
Design and Structural Analysis
Non-destructive Testing
Acoustic and Noise Control
Areas of interest : вЂў Finite Element Analysis вЂў Mechanics of Solid вЂў Non-Destructive Testing вЂў Acoustics and
Noise Control вЂў Signal Processing of Mechanical System
Publications/Conferences :
Bhupesh Verma, Krishnan Balasubramaniam, Prabhu Rajagopal вЂњStudies on the Influence of Axial
Bends on Ultrasonic Guided Waves in Hollow Cylinders (Pipes)вЂќ in review of quantitative NDE, edited
by D. O. Thompson and D. E. Chimenti, AIP Conference Proceedings, New York, (2012), in press.
Bhupesh Verma, Swaminathan Annamali, Prabhu Rajagopal " The Effect of Curvature on the
Scattering of Circumferential Higher Order Mode Cluster (C-HOMC) from Changes in CrossSection" Proceedings of the Indian Society for NDT-Annual Seminar on NDE, Chennai, India (2011),
Education :
B.E. Mechanical Engineering, 2005-2009, C.S.V.T.U. Bhilai
MS by research (Machine Design) 2011- 2013, IIT madras
E-mail id : mech.bhupesh@gmail.com
Boopalan M
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. N. Ramesh Babu
Title of thesis : An improved setup for ice bonded abrasive polishing of metallic and non-metallic materials
Thesis abstract : Freezing of water into ice serves as a bond that can firmly hold the abrasives and aids to form a
flexible tool for polishing. Unlike the earlier setup that made use of liquid nitrogen to prepare a IBAP tool, this work
was attempted to develop a refrigerating unit that helps to prepare the tool in-situ and to enhance the life of tool by
maintaining its temperature within reasonable limits. Preliminary experiments were attempted on metallic
materials in order to study the effectiveness of improved setup. Improvements were made in work holder holder
and tool preparation technique too. Later, surface integrity studies were made on polished metallic and nonmetallic materials.
Skills :
Experience in product design and fabrication
Experience in characterization of various metallic and non-metallic materials
Solid modelling : Pro/E, SolidWorks, AutoCAD
Research interests :
Unconventional machining
Polishing
Metrology
Areas of interest : advanced material processing, Polishing, Metrology, Unconventional machining
Publications/Conferences :
Boopalan M, Venkatarathnam G and Ramesh Babu N, 'An improved setup for precision polishing of
metallic materials using ice bonded abrasive tool', 37th MATADOR Conference, July 2012, (inprint).
About me :
Quick Learner
Strong commitment towards work
Good team player
Strong technical, communication and people skills
Education :
B.E in Mechanical Engineering, 2006-2010, PSG College of Technology, Coimbatore
M.S (by research) in Manufacturing and Precision Engineering, 2010-2013, Department of Mechanical
Engineering, IIT Madras
E-mail id : boopalanmohan@gmail.com
Deepchand Singh Negi
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Arvind Pattamatta
Title of thesis : Investigation of Heat Transfer Augmentation on dimpled surfaces using impinging jet flows.
To study the cumulative effect of geometric parameters of the dimpled target plate in an
Thesis abstract :
impingement jetcooling configuration such as dimple diameter, dimple height and the spacing between dimples on
the heat transfer enhancement and to optimize the configuration of the dimpled target plate. To study the effect of
dimple shape in an impingement jet cooling configuration on heat transfer enhancement and optimize the dimple
shape. Detailed experimental study of heat transfer on optimized geometry along with optimized configuration.
Parameters such as eccentricity between jet hole and dimple, and different crossflow schemes will be chosen to
explore the possibility to enhance the heat transfer coefficient.
Skills :
Computational Fluid Dynamics
CAD Modelling
Programming Language
Operating System
Fluent, Star CCM+
CATIA
C++, FORTRAN, Matlab
Microsoft Windows, Ubuntu
Research interests :
Heat Transfer
Fluid Stucture Study
Turbulence Modelling
Areas of interest : CAD modelling, Sketching with pencil
Publications/Conferences :
Conference: Negi S. Deepchand and Pattamatta Arvind, Parametric design and optimization for
impingement jet heat transfer over dimpled topologies: CFD Study ,ASME IMECE 2012 (November 9-15,
2012, Houston, Texas, USA).
Negi S. Deepchand and Pattamatta Arvind, Parametric design and optimization for impingement jet heat
transfer over dimpled topologies, Journal of Heat Transfer, (Under Review)
About me :
Enthusiastic in learning new things.
Education :
MS (Thermal Engg.)
Indian Institute of Technology Madras, Chennai
8/10
2013
B Tech in Mechanical
North Eastern Regional Institute of Science and
Technology, Nirjuli Itanagar
4.13/5.0
2009
E-mail id : deeimproptus@gmail.com
Dileep Chandran P M
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. B.V.S.S.S Prasad
Title of thesis : Experimental and Computational Conjugate Heat Transfer Study on a Gas Turbine Inlet Guide
Vane in a Linear Cascade
Thesis abstract : Heat Tansfer in Gas Turbines has been a topic of wide discussions and research for the past
three decades. To increase the efficiency, as there is a tendency to increase the inlet temperature of a gas
turbine, reduction of thermal loads and maintain turbine blades at a safer temperatire limit is a necessity. Various
cooling schemes, external (Film cooling) and internal (Convective, Impingement cooling), are widely used and
studied. While most of the previous studies are done under adiabatic condition and concentrating on individual
cooling schemes, the objective of the work is to conduct the study with multiple cooling schemes for a realistic
turbine blade under conjugate condition where conduction is considered and flow & heat transfer is coupled.
Experiment is done on the laboratory linear cascade wind tunnel. A refrigeration system is designed to supply
secondary cold air. Infrared thermography technique is used for temperature measurement. The effectiveness of
cooling schemes under various blowing ratios is studied. Computational work is carried out in Ansys-Fluent.
Geometry is same as experimental teset section and conditions are maintained. Meshing is done in Gambit. Komega SST turbulence model is used. Results are validated with experiments.
Skills :
Solid Modelling :- Solidworks, AutoCAD
Meshing :- Gambit
CFD :- Ansys-Fluent
Programming :- Matlab, C
Virtual instrument interfacing using LabView.
Research interests :
Gas Turbine Heat Transfer
Conjugate Heat Transfer Techniques
Computational Fluid Dynamics
Areas of interest : Gas Turbine Heat Transfer, Conjugate Heat Transfer, Computational Fluid Dynamics
Publications/Conferences :
Dileep Chandran P.M, Paresh Halder, Rajesh Kumar Panda, Prasad B.V.S.S.S, "A Comparative Study of Film
Cooling Effectiveness on a Flat Plate with Adiabatic and Conjugate Conditions for Different Hole Shapes",
Proceedings of ASME Turbo Expo-2012, paper id:GT2012-69142, June 11-15, 2012, Copenhagen, Denmark.
About me :
Compared to other engineering disciplines, more friendly and familier terms in the syllabus book drove me to take
mechanical engineering in my B.Tech. There I developed interest to study more about thermal and fluid systems
and hence to do further studies in that field. I would like to learn and work in this field in realistic problems and
develop my knowledge.
Education :
B.Tech, Mechanical Engineering, 2006-2010, University of Calicut, Kerala.
MS by Research, Mechanical Engineering, December 2010 till date, IIT Madras.
E-mail id : dileeppm@rediffmail.com
G Sudarshan
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. Pramod S Mehta
Title of thesis : Burn Rate Analysis of Multiple-injection Common Rail Direct Injection (CRDI) Diesel Engine
Thesis abstract : The advantages of multiple injections have been well demonstrated by experimental
investigations and modelling results that are reported in literature. A control system however requires a simple
empirical model rather against complex CFD models and in this regard development of an empirical model for a
common rail engine has been envisaged. The approach of empirical modelling used is the Wiebe type burn rate
law to describe the fraction of energy released in a cycle. The following points briefly provide an idea of the entire
process: Experimental pressure histories are acquired on a FORD common rail engine and are processed for
obtaining ignition delay, energy release and combustion duration Correlations are formulated to predict the
ignition delay and combustion duration obtained in the previous step The energy release information is used to
extract burn fractions at the different operating conditions The Wiebe curve is fitted for these burn fraction profiles
obtained previously and the constants appearing in the equation are correlated with engine operating conditions
Skills :
Experimental work
Matlab
SPSS software for data analysis
Diesel RK for engine simulation
MS-Office
Basic knowledge in AutoCAD and Pro-E
Research interests :
1. Engine Testing
2. Energy Release Analysis
3. Use of Alternate Fuels in Modern Engines
4. Engine Control via Open ECU
5. Modes of Engine Operation (HCCI, GDI etc.)
Areas of interest : IC Engines, Alternative Fuels, Data Analysis, Empirical Modelling
About me :
I am an enthusiastic young learner eager to broaden and sharpen my skills as an engineer and as a professional.
My interests primarily rest with engine testing. I am willing to explore new areas in engines such as use of
alternate fuels, different engine operating regimes (HCCI, GDI etc.). I believe in hard work and sincerity to achieve
maximum productivity and I also pride in good communication skills. I would like to merge my preferences with
organization's requirement.
Education :
B.E. Mechanical Engineering, 2006-2010, Sri Venkateswara College of Engineering, Sriperumbudur
High School completed in St. Micheals Academy, Adyar
E-mail id : b4.sss.1989@gmail.com
Gyanishankar Sharma
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Abhijit Sarkar and Prof. N. Ganesan
Title of thesis : Directivity based noise control from vibrating structures
Thesis abstract : Passive control of noise and vibration control is known to have poor performance for global
noise and vibration control in low and medium frequency region. A directivity based method to achieve local noise
control is explored.
Skills :
FEM software - ANSYS
Programming language - MATLAB
Analytical computation - MAPLE
Modelling software - ProE
Documentation and presentation - LATEX and Beamer
Research interests :
Vibration
Acoustics
Finite Element Method
Areas of interest : Finite Element Method, Vibration, Acoustics
Publications/Conferences :
Gyanishankar Sharma, Abhijit Sarkar, N. Ganesan, вЂњUsing directivity of radiated sound for noise control
applicationsвЂќ National Symposium on Acoustics, 5-7 December 2012. Full length paper submitted
About me :
A hardworking person with good leadership qualities.
Education :
B.E, Mechanical engineering with Honours division from RIT Raipur, 2007-2011, Chhattisgarh Swami
Vivekanand Techanical University (C.G)
E-mail id : gyani2511@gmail.com
Jennifer David D
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : DR.P.V.MANIVANNAN
Title of thesis : BEHAVIOR BASED FORMATION CONTROL OF TRUCK-TRAILER MOBILE ROBOTS
Thesis abstract : FORMATION PLANNING AND COORDINATION CONTROL STRATEGY DEVELOPMENT
FOR A COUPLE OF MOBILE ROBOTS WITH LOCALIZATION AND PATH TRACKING ALGORITHM
Research interests :
MOBILE ROBOTICS AND CONTROL
Areas of interest : Mechatronics, Robotics and Automation, Control Systems, Hydraulics and Pnueumatics
Education :
BE Mechatronics Engineering, 2004-2008, Sri Krishna College of Engineering&Technology, Coimbatore
E-mail id : jenniferdavid87@gmail.com
Jitendra U.itankar
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. C. Sujatha
Title of thesis : Experimental and Analytical study of Particle Damping
Thesis abstract : Particle or impact damping technology is one of the latest techniques being used in vibration
and noise attenuation applications. It is a passive vibration damping approach wherein metallic or non-metallic
particles in spherical form are placed inside cavities or attached to structures by an appropriate means at strategic
locations, to absorb vibration energy. The inherent advantages over conventional damping methods include
fitness at extreme low or high temperatures and applicability over wide frequency ranges. In the present work
particle dampers are tested experimentally on simple aluminum cantilever beam for vibration attenuation. The
particles are embedded inside cavities at the anti-nodes of first, second and third bending modes. The success of
this preliminary work has lead to the application of particle dampers in honeycomb structures. Here, Finite
element method (FEM) is used to predict the flexural dynamic behavior i.e., natural frequencies and mode shapes
of the aluminum honeycomb plate by doing a structural modal and harmonic response analysis simulation. The
results are validated by an experimental transient impact modal test on hexagonal aluminum honeycomb
specimen in free-free condition. Next, particle damping in the form of stainless-steel spheres of varying sizes viz.
0.8mm;1mm and 2mm is applied at appropriate locations to study the influence of particle sizes and volumetric
packing ratios on first, second and third bending modes of a honeycomb panel subjected transient impact modal
test. The Frequency Response Functions (FRF) are acquired and measured using Smart Office Spectrum
Analyzer Software. The frequency shift, response attenuation attained and damping factors are experimentally
found out and compared with baseline measurements It has been found out that particle damping leads to
substantial reduction in vibration amplitudes over first few modes. The more the packing fraction, the more is the
attenuation attained. Results also confirm the non-linear behavior of particle dampers whose efficiency is affected
by the quantum of excitation forces and density of particles distribution. An optimum is reached for the best
damping efficiency for a particular bending mode. In order to simulate the granular motion of the spherical
particles in cavities, MSC.ADAMS codes are executed .To get an insight into particle-particle and particle-wall
interactions from computational multi-body dynamics point of view, spring-dashpot models are constructed. The
motions are evaluated in time and frequency domain and responses calculated. Generally, particle motion is
widely studied using Discrete Element Method (DEM). To analyze the granular motion from computational
molecular dynamics point of view PFC 3D (Particle Flow Code) are run and particle motion is visualized to get a
better appreciation into the granular flow of particulate assembly inside cavity.
Skills :
Experimental Skills:
Automotive Vibration testing--Lab and On-road
Automotive Noise Testing--Lab and On-road
Modal test and Analysis
Vibration and Acoustic Data Acquisition skills with Digital Signal Processing softwares
Abiltiy to drive vehicles( SUVs and MPVs) on test roads.
Analytical Skills:
-Coding in MATLAB
-Software usage to solve stress analysis, structural dynamics and acoustics problems in ANSYS
-Software usage skills to solve multi-body dynamics and vehicle dynamics problems in MSC.ADAMS
-Software script wrting skills in PFC-2D and 3-D for Granular Dynamics problems.
Research interests :
Structural Dynamics
Granular Dynamics
Damping in machine members and new materials
Mutli-body dynamics
Computaional Methods in engineering
Multi-body Dynamics
Analytical Mechanics
Mechaincs of materials
Areas of interest : Automotive Noise and Vibration -Testing and Simulation;Experimental and Analytical
application of new methods in troubleshooting structural dynamics problems in machine vibrations. learning and
teaching Mechanics and Structural Dynamics
Publications/Conferences :
J.U. Itankar, S.Chandramohan,"Experimental Studies of Particle Damping in Honeycomb Structures" вЂњIMAC-XXXI
Conference & Exposition on Structural DynamicsвЂќ February 11-14, 2013.
About me :
Deeply intersted in understanding and working out new experimental and analytical methods in structural
dynamics. I have a passion to learn and teach engineering in the right way.
Education :
B.E from Nagpur University , 2002-2006
Pursuing M.S programme in IIT-Madras
E-mail id : jitendra.itankar@gmail.com
Kiran Yelmar
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : K. Viswanath
Title of thesis : COMPUTATIONAL ANALYSIS OF RECESS VANE GEOMETRY MODIFICATION IN THE
CASING TREATMENT APPROACH TO ENHANCE STALL MARGIN IN AXIAL FLOW FANS
Thesis abstract : Different casing treatment methods exist to improve the operational range of an axial flow fan.
Recess vane casing treatment constitutes one of these approaches. In this approach a circumferential recess with
vanes around the casing is employed for stall margin enhancement. The flow at the tip of the axial flow fan is
allowed to enter through an opening into the recess and de-swirled by the vane and redirected into the main
passage of the fan. This redirection of the flow will remove the re-circulating flow near the fan tip inlet. Present
study concerns modifications to the recess vane geometry to allow for additional enhancement of the fan
operating range. Numerical simulations of the effect of variation of the axial blade chord exposure and provision of
different recess height for each exposure, vane count and Vane curvature is the subject matter of this study. The
sensitivity of the operating range to the modifications is analyzed and the most important recess vane geometry
parameters are evaluated. Improvements to the stall margin are obtained with some of the modifications to the
recess vane geometry.
Skills :
MATLAB
ANSYS ICEM CFD, CFX
Research interests :
Thermal Turbomachines
Areas of interest : Gas turbine Engine, Axial flow Fan and Compressors
About me :
Played at National Level Games, Kho-Kho, 2000
Played Regional Level games in Athletes, 2001
Played National Level Games, Kabaddi, 2003
Qualified 52nd Annual All India General Knowledge Test on december10, 2002.
Education :
B.E, in Aeronautical Engineering, 2004-2009, Ganesh Institute of Engineering, Chennai
E-mail id : kiranyelmar87@gmail.com
Kishorkumar Sarva
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. Kumaraswamy.S and Prof. Govardhan.M
Title of thesis : Experimental Study of Centrifugal Pump As Turbine of different Specific Speeds
Thesis abstract : The research is aimed to produce a report on methodology for selecting a pump that operates
as turbine. The analysis is targeted to extract maximum power with reasonable efficiency. Understand flow
behavior of a Pump As Turbine through experiments by analyzing the global parameters. Realize off design
performance. Construe the behavior of these parameters for different pumps based on specific speed. Develop a
correlation based on parameter variations of Pump and its PAT operation. Eventually, it is aimed to implement in
Arunachal Pradesh, India where 700 streams are identified for micro hydro power.
Skills :
Modeling Tools
CFD Tools
Operating System
Tools
Auto CAD, ProE
ICEM-CFD (Tetra - Hexa), CFX
Linux, Windows
MS-Office, Origin
Research interests :
Fluid Mechanics
Turbomachines
Renewable Energy
Areas of interest : Fluid Mechanics, Turbomachines, Renewable Energy
Publications/Conferences :
Conference
Kishorkumar Sarva, Kumaraswamy, S., and Govardhan, M., May 7th 2011. вЂњOptimization of selection
of a Pump for Turbine Mode operationвЂќ, Renewable energy Asia-2011 conference, New Delhi, India.
Journal
Kishorkumar Sarva, Kumaraswamy, S., and Govardhan, M., (2012). вЂњExperimental study on
Centrifugal Pump As Turbine at different Speeds of operation.вЂќ Journal of Applied Science (Accepted).
Kishorkumar Sarva, Kumaraswamy, S., and Govardhan, M., вЂњEffect of speed of operation of Pump As
Turbine on global parameters.вЂќ (In progress for Journal of Renewable Energy)
Kishorkumar Sarva, Kumaraswamy, S., and Govardhan, M., вЂњPerformance study on Pump as Turbine
of different specific speeds at different operating conditions.вЂќ (In progress for Journal of Experimental
Thermal and Fluid Sciences)
About me :
Passionate about playing Carnatic Music on Mandolin (Disciple of Mandolin Sri U. Mandolin Srinivas)
Education :
MS (Research), Dept. of Mechanical Engineering, 2010-2013, Indian Institute of Technology Madra
B.Tech , Dept. of Mechanical Engineering, 2004-2008, JNTU, Hyderabad, India,
E-mail id : sarva.kishor@gmail.com
Libin M N
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. Krishnan Balasubramaniam
Title of thesis : Mathematical modeling and finite element simulation for fatigue crack prediction in flat/curved
plates using Tone-Burst Eddy current Thermography (TBET)
Thesis abstract : Tone Burst Eddy Current Thermography (TBET) technique is a new hybrid, non-contact, NonDestructive Evaluation (NDT) method which employs a combination of both Eddy Current Testing (ECT) and
Thermographic Non-destructive testing (TNDT) techniques. It is a widely used NDT technique for the analysis and
detection of fatigue induced cracks, corrosion induced pits etc, which occurs common in aircrafts. The study
focuses on the mathematical modelling and FE simulation (using FEA package Comsol 4.2a) of typical flat and
curved aircraft components under fatigue loading, for the prediction of stress induced cracks using TBET. This
technique uses induced eddy currents to heat the material being tested and the defect detection is based on
changes of the induced eddy current flows which is revealed through thermal visualization captured by an infrared
(IR) camera. For understanding the influence of cracking and pitting on heat generation and flow within a metallic
body, a fundamental knowledge of the detailed induced current density distribution in the component under test is
required. This information enables us to calculate the amount of heat produced by the defects and how that heat
diffuses to the surface where it is imaged. The objective of this work is to determine whether the TBET method is
suitable for the detection and characterization of service induced cracks, usually caused by either rolling contact
fatigue or stress corrosion, with a high degree of sensitivity.
Skills :
Programming Language
: Matlab, C
Modeling Software
: AUTOCAD, Solidworks, Catia V5, Hypermesh
FEA Software
: Ansys, Comsol3.5 & 4.2a, Abacus
Image processing software : Altair
Research interests :
Finite Element Analysis
Fracture and Fatigue Mechanics
Mechanics of Solids
Infrared Thermal Imaging
Non Destructive Testing
Vibration
Heat Transfer
Areas of interest : finite element analysis, Fracture and Fatigue Mechanics, Mechanics of Solids, Infrared
Thermal Imaging, Non Destructive Testing, Heat transfer, Vibration
Publications/Conferences :
K. Prasad Rao, A. Veera Sreenu, H. Khalid Rafi, Libin M N, Krishnan Balasubramaniam вЂњTool steel and
copper coatings by friction surfacing - A Thermography studyвЂќ, Journal of Materials Processing
Technology, Volume 212, Issue 2, February 2012, Pages 402-407.
Libin M N, Krishnan Balasubramaniam, B.W. Maxfield, C.V. Krishnamurthy, вЂњSimulations and
Measurements of Artificial Cracks and Pits in Flat Stainless Steel Plates using Tone Burst Eddy-
Current ThermographyвЂќ , QNDE 2012, at the Hyatt Regency Denver Tech Center in Denver, Colorado.,
United States, July 15-20, 2012 .
Libin M N, Krishnan Balasubramaniam, B.W. Maxfield, , вЂњNumerical Analysis of Angular Defects in
Bent Plates Using Tone Burst Eddy-Current Thermography (TBET) вЂќ QNDE 2012, at the Hyatt
Regency Denver Tech Center in Denver, Colorado., United States, July 15-20, 2012.
Libin M N, Krishnan Balasubramaniam, B.W. Maxfield, C.V. Krishnamurthy, вЂњ3D Finite Element Analysis
of Flat and Bent Plates for Defect Detection using Tone Burst Eddy Current ThermographyвЂќ " QIRT
2012, University of Naples Federico ??, Naples, Italy, June 11-14, 2012.
Libin M N , Krishnan Balasubramaniam, C V Krishnamurthy, R. Engelbart. вЂњTone Burst Eddy-Current
Thermography for the Estimation of Corrosion Defects in Aircrafts Components" QNDE 2011,
University of Vermont, Burlington, Vermont, United States, July 17-22, 2011.
About me :
I am a postgraduate student specialized in Machine design from IIT Madras.
I am born and brought up in a small town belonging to Palakkad district of Kerala. I have completed my
graduation in Btech. Mechanical Engineering from NSS collegge of Engineering, Palakkad, which is under Calicut
University.
About my family, we are 5 members including me,my father is retired from Govt. service, my mother is
homemaker, I have two siblings, one elder and younger brother.
My Hobbies are reading, listening to music, and playing batminton
My strengths are, I am a result oriented person, I can easily adopt in any environment, quick learner and ability to
work with the same amount of zeal at any time of the day.
My short term goal is to be good in my position. Start my carrier by a reputed company like yours.
My long term goal is to become more responsible and knowledgeable personality and on respectable position on
my company.
Education :
MS by research, Machine Design, Dept. of Mechanical Engineering, 2011-2013, IIT Madras
Bachelor of Technology (Mechanical Engineering) ,2005-2009, Calicut University
E-mail id : libinmn@gmail.com
M Ajay
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. T N C Anand
Title of thesis : "Application of Ultrasonic Atomization to SI Engine"
Thesis abstract : Ultrasonic atomization is a very convenient method to produce very small droplets of fuel.
Resulting droplet size distributions are very narrow and the mean diameter is essentially only controlled by the
excitation frequency. Generation of droplets in the micron range can be achieved 130-140 kHz waves, with
voltages of around 15-30 V. To explore the capabilities of ultrasonic atomization for combustion in an internal
combustion engine, an excitation source i.e. ultrasonic atomizing micro-nozzle has been used. This ultrasonic
atomizer is made of piezoelectric ceramic material. The flow rate with different pulse width at same frequency is
found out., and it will further be used in combustion application of a small two wheeler internal combustion engine
(110 cc) to determine its performance and emission.
Skills :
CONVERGE
STAR-CD
CFD ACE+
MATLAB
PYTHON
OPENFOAM
Research interests :
Ultrasonic Atomization
Alternate Fules
Chemical Kinetics
IC Engines Combustion
Areas of interest : IC Engines, Heat Trasnfer, CFD, Alternate Fules, Atomization
Publications/Conferences :
Ajay and Josy Pullockara, "Determination of an Aifcraft Propeller Thrust Using a CFD Code" Fourth
Symposium on Applied Aerodynamics and Design of Aerospace Vehicles SAROD 2009 December 10 -12,
2009 Eagleton Resorts, Bangalore, INDIA.
About me :
Good Team Member
Education :
BE in Mechanical Engineering, 2003-2007, VISVESVARAYA TECHNOLOGICAL UNIVERSITY,
BELGAUM, KARNATAKA, INDIA.
M.Tech in Thermal Power Engineering, 2007-2009, VISVESVARAYA TECHNOLOGICAL UNIVERSITY,
BELGAUM, KARNATAKA, INDIA.
E-mail id : ajayrmech@gmail.com
Madan Kumar
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. Pramod S Mehta & Prof. A. Ramesh
Title of thesis : Study of swirl motion in internal combustion engine
Thesis abstract : Study of swirl measurement techniques Comparison of swirl measurement techniques
Skills :
Experimental skills pertaining to I C Engines
Boost Software
Lab view
Matlab
MS-Office
Research interests :
Internal combustion engines
Areas of interest : Internal Combustion Engines, Heat and Mass Transfer
About me :
Very calm and cool.
Education :
MS (Research), Dept. of Mechanical Engineering, 2011-2013, Indian Institute of Technology, Madras.
B Sc Engineering ,Mechanical Engineering, 2004-2008, IIT Madras
E-mail id : madanbhuit.10@gmail.com
Mithun M G
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Shaligram Tiwari
Title of thesis : EFFECT OF FLOW INDUCED VIBRATION ON FLUID STRUCTURE INTERACTION
Thesis abstract : Flow-induced vibration (FIV) is a typical fluid-structure interaction problem. For example flow
over automobiles, buildings, bridges, risers etc. The presence of bluff body (say square cylinder) in a flow alters
the dynamics of the flow. When Reynolds number is sufficient it initiate vortex shedding from body. These vortices
that are shed from the body will impart oscillatory forces on the body and make the body to vibrate and further
may lead to the failure of the structure. Hence FIV has became an important area of research. FIV can also be
studied by forcing the cylinder to vibrate using external source which is typically known as forced vibrations. The
response of unsteady wake, aerodynamic forces, lock-in behavior etc. due to the presence of a single cylinder
and combination of cylinders at different arrangements are studied numerically. Computations are performed
using a developed Finite difference code using MAC algorithm and also using the commercial Finite volume
software Fluent.
Skills :
Computational Fluid Dynamics- FLUENT, CFX
Meshing- ICEM-CFD, GAMBIT
FEM- ANSYS APDL, ABAQUS
Solid modelling- Pro-e, Autocadd
Programming- MATLAB, FORTRAN
Research interests :
Fluid Structural Interactions
Computational Fluid Dynamics
Bluff body Aerodynamics
Flow Induced Vibrations
Non-linear Dynamics
Areas of interest : Fluid structure interaction, CFD, Fluid dynamics, Aerospace, Basic FEM
Publications/Conferences :
Raghu, V.G., Mithun,, M.G., Patil,P., Tiwari,S., "Characteristics of Unsteady Flow Past Synchronous
Transverse Oscillation of a Square Prism," IUTAM Symposium on Bluff body flows (blubof 2011), IIT
Kanpur, December 2011.
Mithun, M.G., Tiwari, S., "Numerical Study of Two-dimensional Unsteady Flow Past Transversely
Vibrating Square Cylinder," European Fluid Mechanics Conference 9, (efmc9), Rome,Italy. September
2012.
Mithun, M.G., Tiwari, S.,Vasudevan, Raghavan., " Flow Over Two Inline Square Cylinder Vibrating With
Phase Shift," International Conference on Applications of Fluid Engineering (CAFE 2012), September
2012
Antony Roam Symenthy., Mithun,M.G., Vasudevan, Raghavan.,Tiwari,S., "Effect of Aspect Ratio of an
Upstream Elliptic Cylinder on The Wake Characteristics of a Circular Cylinder," International Conference
on Applications of Fluid Engineering (CAFE 2012), September 2012
About me :
My name is Mithun M G, I am born and brought in a place called Beypore in Calicut district, Kerala.
I did my schooling in Technical High school and after that I did Diploma in Tool and Die engineering. I did my
bachelor degree in Aeronautical engineering from Aeronautical society of India. Currently I am pursuing MS by
research in Mechanical engineering from IIT Madras.
I am very passionate towards learning new things and sharing that knowledge. My long term goal is to be a
pioneer in the field that I am working. My short term goal is to get placed in a challenging position in an reputed
organization and acquire maximum knowledge to support the organization where I am working.
My strength is my knowledge, skill, will power and hardworking mentality.
My weakness is, I will be restless and uncomfortable if my works are pending and I will take overload to complete
work in time which may affect my health.
Education :
Diploma in Tool and Die Engineering, 2002-2005, Kerala Government Poly Technic College, West hill,
Calicut, Kerala.
Bachelor degree (AMAeSI) Aero-mechanical, 2006-2010, Aeronautical Society of India, New Delhi
MS Mechanical Engineering, 2010-2013, IIT Madras
E-mail id : mg.mithun@gmail.com
Mohammad Naeem Khan
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. V Raghavan
Title of thesis : Stability of Jet Diffusion Flames
Thesis abstract : Behavior of flame characteristics like flame length, lift-off, blowout and blow off for various
hydrocarbon fuels and for various fuel combination have been studied. Study has been carried out both
experimentally and numerically. Numerical study has been carried out using commercially available CFD software
ANSYS FLUENT V13.0. Various kinetic mechanisms in CHEMKIN format has been employed to correlate the
experimental as well as numerical results. Emission characteristics have been studied. To observe the flame
width behavior and thermal plume width, optical techniques like Schlieren and Shadowgraph are used. Fuels used
for study are Hydrogen, Carbon-monoxide and Liquefied Petroleum Gas.
Skills :
Experimental skills pertaining to combustion
Combustion modeling
Flow visualization techniques (Schlieren and shadowgraph)
Ansys Fluent
Gambit
Catia
Research interests :
Combustion & Propulsion
Heat and Mass Transfer
CFD
Computational Combustion
High Speed Combustion
Areas of interest : Combustion & Propulsion, compressible flow and jet propulsion, Heat and Mass Transfer,
CFD, Computational Combustion
Publications/Conferences :
Conference
Naeem Khan, K. R. V. Manikantachari, Rahul Dutta Roy and V. Raghavan., June 14th 2012.
вЂњExperimental Study of Characteristics of LPG-Hydrogen Jet Diffusion FlamesвЂќ, International Conference
on Production, Energy and Reliability (ICPER 2012), Kuala Lumpur, Malaysia.
Journal
Naeem Khan, K. R. V. Manikantachari, Rahul Dutta Roy and V. Raghavan., (2012). вЂњExperimental
Study of Characteristics of LPG-Hydrogen Jet Diffusion Flames.вЂќ Journal of Applied Science
(Accepted).
About me :
Funny, calm n cool.....
Education :
MS (Research), Dept. of Mechanical Engineering, 2011-2013, Indian Institute of Technology, Madras.
B.E Aeronautical Engineering, 2006-2010, Aeronautical Society of India, New Delhi.
E-mail id : khan.naeem079@gmail.com
Neeraj Singh
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. T. Sundararajan and Dr. V. Raghavan
Title of thesis : Numerical simulation of coal gasification for high ash coal.
Thesis abstract : The work aims to optimize the efficiency and reliability of gasifiers fuelled with high-ash content
coals. This type of coal contains a relatively high share of ash, which makes it difficult to deploy it efficiently as
fuel. The aim of the project is to boost the conversion efficiency of high ash coal for electricity generation. The
project will allow optimizing the global efficiency of the gasification technology for high ash coal by minimizing the
steam use, optimizing particle size vs. residence time, developing particle agglomeration avoidance strategies.
Numerical simulation of moving bed and bubbling fluidized bed for coal gasification and parametric study for
various parameters will be done under this work.
Skills :
* FLUENT for fluid dynamics simulation and BARRACUDA for particle fluid dynamics simulation.
* Solid Works and pro-E for solid modeling and ASPEN PLUS for equilibrium analysis of processes with chemical
reactions.
* Numerical and experimental study regarding coal combustion and gasification.
* Programming Language: Fortron.
Research interests :
* Modeling of particle and fluid flow along with combustion.
* Numerical Modeling and experimental study of coal combustion and gasification.
* Study of moving, bubbling and fluidised bed equipments for combustion and gasification purpose.
Areas of interest : Numerical modeling of particle and fluid flow, Combustion modeling, Coal combustion and
gasification
About me :
I am a confident person who love to learn and allways ready to work hard. I am friendly nature person so always
get good friends so i can work with team sprit.
Education :
M.S., Mechanical Engineering (Thermal), 2011-2013, IIT Madras.
B.E., Mechanical Engineering, 2007-2011, Chhatrapati Shivaji Institute of Technology, Durg (C.G.)
E-mail id : neerajsinghcsitmech@gmail.com
Oswald Jason Lobo
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Dhiman Chatterjee
Title of thesis : Low Reynolds number flows in Mini and Micro Channels
Thesis abstract : To develop numerical co-relations for Hydrodynaimc entrance length, separation lentgh and
pressure drop in mini channels based on numericals results and to validate by doing experiments.
Skills :
Softwares - Matlab, Ansys ICEM CFD, Ansys CFX, Autocad, Solidworks.
Research interests :
Computatuional Fluid Dynamics
Areas of interest : Microfludics, Fluid Mechanics
Education :
B.E. Mechanical Engineering, 2005-2009, M.S. Ramaihah Institute of Technology, Bangalore
E-mail id : ojlobo@gmail.com
Rajesh Male
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Prof. N. Siva Prasad
Title of thesis : Finite Element Analysis of Passenger Car Radial Tire
Thesis abstract : The present research aims, to perform various analyses on a passenger car radial tire to
predict its performance by proper selection of nonlinear Hyperelastic material model Various analyses include
Inflation analysis, Rim fitment analysis, Footprint analysis, Rolling analysis, Cornering analysis The results
obtained can be compared with experimental results for validation purpose
Skills :
Simulation Software: Abaqus, Ansys, HyperMesh
Modeling Software : SolidWorks, AutoCAD
Research interests :
Finite Element Analysis
Design and Structural Analysis
Constitutive Modeling
Non linear analysis
Areas of interest : finite element analysis, Design and Structural Analysis, Constitutive Modeling, Non linear
analysis
Publications/Conferences :
Rajesh Male, N. Siva Prasad, вЂњFinite Element Analysis of Passenger Car Radial Tire using Mooney-Rivlin
& Yeoh ModelsвЂќ, International Conference on Applications and Design in Mechanical Engineering,
ICADME
2012, Penang, Malaysia.
About me :
Date of Birth: 1st July, 1988
Hobbies: Playing online chess
Languages known: English, Hindi and Telugu
Strengths: Self-motivation, Positive thinking
Education :
B.Tech Mechanical Engineering, 2005-09, Gudlavalleru Engineering College, Andhra Pradesh.
MS, Machine Design, 2010-12, IIT Madras
E-mail id : raj.maale@gmail.com
Roson Kumar Pattanayak
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Prabhu Rajagopal
Title of thesis : Modal analysis of Ultrasonic Guided Waves for inspection of Structures with arbitrary crosssection using Semi Analytical Finite Element (SAFE) Method
Thesis abstract : Ultrasonic guided waves are attractive for the long range inspection of large structure due to
their unique features such as high velocity, through structure penetration and low attenuation in uncoated
components. They are well established in the inspection of straight regular large structures with simple crosssection like plate; pipelines etc.To extracting the modal structures and understand the behavior of guided waves
in irregular cross-sections is still often not known. So, we demonstrated the Semi-Analytical Finite Element
(SAFE) Method to understand the modal structures in complex cross section. Recently the SAFE method has
been widely used for such applications. The advantage of this method is that only the cross section of the wave
guide has to be meshed by finite element i.e. the section normal to the direction of wave propagation.This
significantly reduces the computational time and can be used to model large geomtries.we described solutions to
dispersion curves and modal structures achieved using the SAFE method for complex geometries such as
transverse bend plate ,Oval pipe, Eccentric pipe and polygonal pipe, which has a broad application in a number of
industries and it will be more useful for practical NDE inspection.
Skills :
Designing tool : CATIA V5, Solid works, AutoCAD
Analysis tool
: COMSOL 4.2, Abacus V 6.9, ANSYS (Structural)
Programming Language
: MATLAB, Basic knowledge in вЂњCвЂќ.
Research interests :
Finite Element Analysis (FEA)
Dynamics of structures (vibration / Modal analysis)
Ultrasonic Guided wave technique
Non Destructive Evaluation (NDE )
Areas of interest : finite element analysis, Dynamics of Structures
Publications/Conferences :
Conference:
Roson Kumar Pattanayak, Krishnan Balasubramaniam and Prabhu Rajagopal вЂњUltrasonic guided
waves in elliptical annular cylinders (pipes)вЂќ International Congress on Ultrasonics, Singapore, may
2013 (accepted)
Roson Kumar Pattanayak, Krishnan Balasubramaniam and Prabhu Rajagopal вЂ�Guided wave
characteristics for inspection of pipes with irregular cross-sectionвЂ™ NDE, New-Delhi, Dec 2012
(submitted)
Abilasha Ramadhas,S.P, Roson Kumar Pattanayak, Prabhu Rajagopal, and Krishnan Balasubramaniam ,
вЂњUltrasonic Waves Guided by Transverse Bends In Plates Subjected to Symmetric
ExcitationвЂќReview of Progress in Quantitative NDE, American Institute of Physics, vol. 32, in press, New
York,2012
International Journal Publication :
Abilasha Ramadhas,Roson kumar Pattanayak, Krishnan Balasubramaniam and Prabhu Rajagopal
вЂњAntisymmetric feature-guided ultrasonic waves in plates with small radius transverse bends
subjected to low-frequency symmetric axial excitationвЂќ Journal of the Acoustical Society of
America (communicated)
Abilasha Ramadhas, Roson kumar Pattanayak, Krishnan Balasubramaniam and Prabhu Rajagopal
вЂњStudies on the focusing of symmetric feature guided ultrasonic wave in plates with transverse
bendsвЂќ Journal of Ultrasonics (communicated)
About me :
My Hobbies are playing Cricket,dancing , listening to music, and reading automobile magazines .etc.
My strength is I have positive attitude, quick learner and ability to work with the same amount of zeal at any time
of the day.
My short term goal is to be good in my position.
My long term goal is to become more responsible and knowledgeable personality and on respectable position on
my company.
Education :
BTech Mechanical Engineering, 2005-2009, KIIT University ,Bhubaneswar,ORISSA
MS by research, Machine Design, Dept. of Mechanical Engineering, 2011-2013,
IIT Madras
E-mail id : roson.pattanayak@gmail.com
Saransh Jain
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Anand TNC
Title of thesis : Experimental Studies On Carburetors
Thesis abstract : Spray Characterisation in Carburetors Flow in the emulsion tubes
Skills :
Solid modelling : Pro/E, SolidWorks
Computational fluid dynamics: Converge, Star CD
Matlab
Lab View basics
Image Processing
Sketching
Research interests :
IC Engines
Atomization & Sprays
Carburetors
CFD
Laser diagnostics In Engines
Areas of interest : IC Engines, Combustion & Propulsion, CFD and it's application to engine processes, Sprays
and atomization, Image Processing, Laser Diagnostics in Engines
About me :
Hard Working
Leadership skills
Education :
B.Tech Mechanical Engineering, 2007-2011, Shri Shankarcharya College Of Engineering & Technology,
Bhilai
Master of Science by Research (MS) Thermal Engineering, 2011-2013, IIT Madras
E-mail id : its.saranshjain@gmail.com
Sreedhar P
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. Krishnan Balasubramaniam
Title of thesis : Condition monitoring of Marine diesel engines using Acoustic Emission
Thesis abstract : In reciprocating machinery like IC Engines, due to the amount of power involved during the
motion of the piston inside the cylinder, proper lubrication of the cylinder liner is critical. Lack of sufficient
lubrication inside the cylinder can lead to a wide range of problems to the engine including power loss, excessive
fuel consumption and in more serious cases, scuffing and damage to the liner and rings. Thus the monitoring of
the lubricant oil supply to the cylinder is essential in achieving better efficiency for the engine in terms of power,
fuel consumption etc. The objective of the work is to use acoustic emission signals for evaluating the
effectiveness of lubrication inside the cylinder. Tests were conducted on different kinds of engines to study the
relationship between the lubricant oil level and the frequency content of acoustic emission (AE) signals. Further
the changes in the AE signal were studied quantitatively to prove its effectiveness as a tool to monitor lubricant oil
level.
Skills :
Finite Element modeling with ABAQUS and ANSYS
Coding with Matlab
CAD modeling using AUTOCAD, Solidworks, CATIA
Development of Virtual Instrument interface using LabVIEW
Working experience on Phased array Ultrasonic Equipment
Working experience on Automated ultrasonic C-scan system and data analysis
Courses completed on Finite Element Analysis and Advanced Non-Destructive Evaluation
Working knowledge on all NonвЂ“Destructive Evaluation techniques
Research interests :
Condition monitoring of Marine Engines
Acoustic Emission
Ultrasonic Testing
Non Destructive Evaluation
Areas of interest : Non Destructive Testing, Ultrasonics, Engine Condition Monitoring, Acoustic Emission
Publications/Conferences :
Sreedhar P., Janardhan Padiyar M., Maharajan R., Krishnan Balasubramaniam, "Development of an
Acoustic Emission Condition Monitoring system for use in IC Engines.", Journal of Non Destructive Testing
and Evaluation, Vol. 9 Issue 4, March 2011
Sreedhar P, Krishnan Balasubramaniam, "Acoustic Emission monitoring of Lube Oil Condi-tion in Large IC
EnginesвЂќ Proceedings of WCNDT2012, April 2012, Durban, South Africa.
Sreedhar P, Krishnan Balasubramaniam, "Optimization of frequency band for the detection of Lubricant oil
starvation in engines using Acoustic Emission" NDE2011 , Chennai Dec 2011
Sreedhar P., Anil V Singanamalli, Maharajan R., Krishnan Balasubramaniam, "Frequency Do-main
Analysis of Acoustic Emission signals from IC Engines", 24th International Congress on Condition
Monitoring and Diagnostics Engineering Management (COMADEM2011), Stavanger, Norway, May,2011.
Sreedhar P., Janardhan Padiyar M., Maharajan R., Krishnan Balasubramaniam, "Development of an
Acoustic Emission system for IC Engine Health Monitoring", NDE2010, Kolkata, Dec 10.
Abilasha Ramadhas, Sreedhar P, Prabhu Rajagopal, Krishnan Balasubramaniam, "Ultrasonic Waves
guided by transverse bends in plates subjected to symmetric excitation", QNDE2012,Denver,Colorado,
July 2012
About me :
I am currently a master's student at IIT Madras. I finished my Bachelor's degree in Mechanical Engineering from
NSS College of engineering, Palakkad, Kerala (Which is my native). After my Bachelor's degree, I joined Centre
for Non Destructive Evaluation in IIT Madras as a Project associate. I have handled various research and
consultancy projects during my time as project associate. I joined for MS program in Dept of Mechanical
Engineering in Jan 2010.
I joined this program in IIT Madras because of my passion for research. My career goal is to hold a responsible
and challenging position in the R&D lab of a reputed organisation.
Education :
Bachelor of Technology (Mechanical Engineering) ,2004-2008, Calicut University
MS by research (Machine Design) ,2010 till date, IIT Madras
E-mail id : sreedharnss@gmail.com
Vivek Agrawal
Master of Science by Research (MS)
Department of Mechanical Engineering
Guide : Dr. J.M.Mallikarjuna
Title of thesis : In-Cylinder Flow Studies in Two-Stroke Engine
Thesis abstract : Flow inside the engine decides the behaviour of fuel mixing and flame propagation. In-Cylinder
Flow Studies in Two-Stroke Engine using Particle Image Velocimetry(PIV) and CFD.
Skills :
CFD Software - Star-CD
Solid Modelling - Pro-E
Programming Language - Matlab
Operating System- Windows/Linux
Research interests :
IC Engines
Fluid Mechanics
CFD
Laser Diagnostics in Engines
Flow Visualization using Optical Techniques
Areas of interest : Internal Combustion Engines, Fluid Mechanics, CFD and it's application to engine processes,
laser
Education :
B.E. Mechanical Engineering, in 2010 from Shri Shankarcharya College Of Engineering & Technology,
Bhilai(C.G.)
Persuing Master of Science by Research(MS) in the IC Engines Lab, Department of Mechanical
Engineering, IIT Madras.
E-mail id : viv.agrawal0901@gmail.com
Department of Metallurgical and Materials
Engineering
A Joseph Berkmans
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Dr. Prathap Haridoss
Title of thesis : Alignment of carbon nanotubes, synthesized using arc discharge method
Thesis abstract : Multiwalled carbon nanotubes are synthesied and aligned using rotating cathode arc discharge
method. The degree of alignment and the qualitiy of MWCNTs are characterized by XRD, Raman spectroscoy,
SEM and TEM. Tailoring of the aligned nanotubes are achived by appliying simple physical forces.
Skills :
Synthesising new nanostructures
Operating TEM, and observing lattice fringes of cnts using LaB6, 120 kV (cm12) TEM is my favourite
work.
Bright field, Dark field and Diffaction on magnatic and non magnetic materials and observing their
microstructure details
Growing defect less swcnt and mwcnts in cvd on silicon substrates
synthesising aluminum/ cnt compsites through ball milling and characterization
'Cahracterization of nanomaterials
Research interests :
Carbon nanotubes
Carbon nanohorns
Nanocomposites (Metal matrix and Polymer matrix)
Electron microscopy (TEM and SEM)
Areas of interest : Carbon Nanotubes, Carbon nanohorns, composites, Materials Characterizaion, TEM.
Publications/Conferences :
Journal:
Joseph Berkmans A and Prathap Haridosss, High yield formation of carbon nanotubes using arc
discharge assisted with a nitrogen jet, Transactions of The Indian Institute of Metals,Vol.64, 2011,137-142.
Conference:
High yield formation of carbon nanotubes using arc discharge assisted with a nitrogen jet,
JosephBerkmans A and Prathap Haridosss, ISRS 2010.
About me :
I am hard working and simple researcher. Analysing research problems and characterising materials are my
intrests.Eager to work on nanotechnology and materials technology.
Education :
B.SC Physics 2001-2004, RDGAC college sivaganga
M.Sc Materials Science, Anna University, CEG, 2004-2006, Guindy, Chennai
M.Tech Materials Science, National Institute of Technology Tiruchirapalli,Tiruchirapalli.
E-mail id : josephberkmans@gmail.com
B. Ratna Sunil
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Dr. T.S.Sampath Kumar, Dr Uday Chakkingal
Title of thesis : Studies on ultrafine grained magnesium based materials processed by severe plastic deformation
techniques for biomaterial applications
Thesis abstract : Magnesium and its alloys have attracted great interest in the field of biomaterials due to their
degradable nature in physiological environment and mechanical properties near to natural bone. However,
controlling the rapid degradation is prime issue need to be addressed in developing biodegradable implants based
on magnesium biocorrosion. Severe plastic deformation techniques attracted great attention due to the potential
to achieve nano-submicron grain structures in solid state itself. Equal channel angular pressing (ECAP),
accumulated roll bonding (ARB), high pressure torsion (HPT), friction stir processing (FSP) and groove pressing
(GP) are the processes developed to refine the microstructure of metals. In the preset work, pure magnesium and
AZ31 magnesium alloys were processed by ECAP, GP and FSP to achieve fine grain structure. The role of
microstructure on the degradation rate, biomineralization and cell response was studied. ECAP was adopted for
solid samples of rod shape of diameter 6mm and 10mm. GP was adopted for processing sheets of thickness
2mm. FSP was used to refine the microstructure at the surface and to prepare the surface composites using nanohydroxyapatite as the dispersing phase. Also, magnesium and hydroxayaptite composites were fabricated from
high energy ball milling and sintering. All the materials processed by different routes are investigated in-vitro to
evaluate the toxicity levels and material tissue interactions.
Skills :
Microscopy,
Mechanical properties evaluation,
Equipment design and fabrication,
Writing and teaching skills.
Research interests :
Biomaterials
Nanomaterials
Metal forming
Powder metallurgy
Advanced material processing
Areas of interest : Teaching/ R&D in Biomaterials, Nanomaterils, Powder metallurgy, advanced material
processing, metal forming.
Publications/Conferences :
Refereed International Journals
1. B. Ratna Sunil, D. Sivaprahasam and R. Subasri Microwave sintering of nanocrystalline WC-12Co: Challenges
and perspectives, International Journal of Refractory Metals & Hard Materials 28, (2010) 180-186
2. B. Ratna Sunil,T. S. Sampath Kumar and Uday Chakkingal ;Bioactive grain refined magnesium by friction stir
processing, Materials Science Forum Vol. 710 (2012) 264-269
3. B. Ratna Sunil, Arun Anil Kumar, T. S. Sampath Kumar, Uday Chakkingal; Role of biomineralization on the
degradation of fine grained AZ31 magnesium alloy processed by groove pressing, Material Science and
Engineering C ( under review)
International conferences
1. B.Ratna Sunil, T.S.Sampath Kumar, Uday Chakkingal, Biodegradable magnesium based materials processed
by severe plastic deformation techniques, workshop on disruptive innovation in health care, 14th -19th Oct.
2012, Dept. of Engg. Design, IIT Madras, Chennai
2. B Ratna Sunil, T. S. Sampath Kumar, Uday Chakkingal, V. Nandkumar and Mukesh Doble Friction Stir
Processing of Magnesium -Nanoapatite Composites for Rapid Biomineralization with controlled degradation, 4th
Symposium on Biodegradable Metals (BIOMETAL2012), 27th Aug - 1st Sept 2012,Maratea, Italy
3. B Ratna Sunil, T. S. Sampath Kumar and Uday Chakkingal Bioactive grain refined magnesium by friction stir
processing Int. Conf. Adv. Mat. and Manuf. Pro. for Str. Sec.(ICAMPS-2012), 19-21 Jan 2012, Trivandrum, Kerala
4. B. Ratna Sunil, T. S. Sampath Kumar, Uday Chakkingal Degradable metal matrix nanocomposites of AZ31 Mg
alloy and HA by friction stir processing: characterization and bioactivity studies Int. conf. Bio. Imp. Dev. and
Tissue Engg (BIDTE-2012) 6-8th Jan 2012, Rajalakshmi Engg College, Chennai.
5. B. Ratna Sunil, Arun Anil Kumar, T. S. Sampath Kumar and Uday Chakkingal Investigating in-vitro bioactivity of
ultra fine grained AZ31 processed by groove pressing 11th Asian Bio Ceramics (ABC 2011) 30th Nov-2nd Dec
2011, Tsukuba, Japan
6. B. Ratna Sunil, T. S. SampathKumar, Uday Chakkingal, T.S.N. Sankara Narayanan Surface mechanical
attrition treatment of magnesium for implant applications: characterization and bioactivity studies NMD-ATM 2011,
13-16 Nov. 2011, Hyderabad.
7. B. Ratna Sunil, T. S. Sampath Kumar, Uday Chakkingal, T.S.N. Sankara Narayanan Characterization of
surface modified pure magnesium processed by SMAT for implant applications 4th Indo-Aust. Conf. on biomat.,
tissue engg and artificial organs 10-12th February 2011, Sardar patel university, Gujarat.
About me :
Born on 12-04-1981,
Married,
known English and Telugu languages
Education :
Diploma in Mechanical Engineering (D.M.E.) (1996-99) - M.B.T.S.Govt Polytechnic, Guntur, Andhrapradesh.
B. E (Mechanical Engg.) (2000-04) - Andhra University, Visakhapatnam, Andhrapradesh
M. E.(Production Engg.) (2005-07)- Osmania University, Hyderabad, Andhrapradesh
Ph. D (Metallurgical and Materials Engg) (2010-Till date)- Indian Institute of Technology Madras, Chennai
E-mail id : bratnasunil@gmail.com
Damodaram R
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Dr. S. Ganesh Sundara Raman and Dr. K. Prasad Rao
Title of thesis : Microstructure and Mechanical Properties of Alloy 718 Friction Welds.
Thesis abstract : The microstructure and mechanical properties of alloy 718 friction weld joints are reported in
this work. Developing friction welding process parameter windows for alloy 718 in solution treatment (ST) and
solution treatment and aging (STA) conditions. Study the effect of pre вЂ“ and post weld heat treatment on
metallurgical and mechanical properties.
Skills :
Mechanical Properties Evalution.
Operating SEM.
Failure Analysis.
Material Characterization.
Research interests :
Materials Joining
Materials Testing
Materials Characterization
Failure Analysis
Areas of interest : Welding, Material Testing, Material Characterization, Failure Analysis
Publications/Conferences :
Journal
R. Damodaram, S. Ganesh Sundara Raman, K. Prasad Rao, Microstructure and mechanical properties of
friction welded Alloy 718, Materials Science and Engineering: A, (Communicated).
Conferences
R. Damodaram, S. Ganesh Sundara Raman, K. Prasad Rao, Microstructure and tensile properties of
friction welded Inconel 718. Annual Technical Meeting of the Indian Institute of Metals, November
13-16, 2011, Hyderabad.
R. Damodaram, S. Ganesh Sundara Raman, K. Prasad Rao, Mechanical properties of Alloy 718 friction
weld joints after direct aging treatment. The 3rd Asian Symposium on Materials and Processing, August
30-31, 2012, IIT Madras, Chennai.
R. Damodaram, S. Ganesh Sundara Raman, K. Prasad Rao, The effects of post-weld heat treatments on
microstructure and mechanical properties of Alloy 718 friction weld joints. Accepted for presentation in
ISRS-2012, IIT Madras, Chennai.
About me :
Can get together with others easily.
Able to grasp new things quickly.
Hard working nature to achieve the goal
Education :
B.Tech Mechanical Engineering, 2003-2007,Srikalahasteeswara Institute of Technology, Srikalahasti, Andhra
Pradesh.
M.E Manufacturing Engineering, 2007-2009, Madras Institute Of Technology, Anna University, Tamilnadu.
E-mail id : damodaram.r@gmail.com
Debalina Bhattacharjee
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Prof. M.Kamaraj (HOD) and Prof. R. Sarathi
Title of thesis : Synthesis and wear behavior of nano tungsten carbide reinforced iron composites
Thesis abstract : To optimize the process parameters for obtaining nano WC particles using wire explosion
technique. Correlating the process parameters of wire explosion with the produced particle size, using optical
emission spectroscopy Using the nano WC powder so produced, iron based MMCs were prepared,containing two
different percentages of nano WC powder, through powder metallurgy route and subjected to sliding wear studies.
Wear behavior of nano WC powder reinforced composites was compared with the wear beahavior of unreinforced
and micron size WC powder reinforced iron matrices.
Skills :
XRD
HRSEM along with EDS.
TEM
Microhardness
FTIR
UV-VIS-NIR spectroscopy
Sliding wear testing (Pin on disc)
Ball mill
Electroless nickel plating
Optical microscopy
Dry erosion testing
Slurry erosion testing
Abrasive wear testing
Optical spectroscopy
Research interests :
Nano technology
Iron based composites
Tungsten carbide
Tribology
Thermal spray coatings
Areas of interest : Nano technology, Iron based composites, Tungsten carbide, Tribology, Thermal spray
coatings
Publications/Conferences :
Journals:
Debalina, B., Kamaraj, M., Murty, B.S., Chakravarthi, S.R., Sarathi, R., "Generation and
characterization of nano-tungsten carbide particles by wire explosion process", Journal of
Alloys and Compounds 496 (2010) 122вЂ“128.
Debalina, B., Kamaraj, M., Chakravarthi, S.R., Sarathi, R., Vasa, N.J., "Optical emission
spectroscopic studies of tungsten wire discharged plasma", Accepted for publication in
Plasma Science and Technology (IOP) on 26th December, 2011.
Conference Proceedings:
B. Debalina, M. Kamaraj, S.R. Chakravarthi, R. Sarathi, Generation and
characterization of nano-tungsten carbide particles by wire explosion process with
methane gas, Conference proceedings of Asian Particle Technology (APT, 2009),Delhi.
B. Debalina, M. Kamaraj, S.R. Chakravarthi, R. Sarathi, Synthesis and characterization of
nano-tungsten carbide particles by wire explosion process with paraffin-methane medium,
Conference proceedings of Asian Conference on Nano science and Technology
(ASIANANO, 2010),Tokyo. ?
B. Debalina, M. Kamaraj, S.R. Chakravarthi, N.J.Vasa, R. Sarathi, Generation and
Characterization of Nano Tungsten Carbide Particle by Wire Explosion Process (Invited
Paper). Conference proceedings of IEEE Xplore-TENCON 2010, Fukuoka.
About me :
I am a woman with high ambitions, who believes that hard work is the key of success and want to
challenge those people who believes that "girls can do nothing".
I belong to north east region and reached this level with lot of struggle and motivation.
Want to work further in research and development field and want to contribute to the society.
During Ph.D tenure I have learnt to tackle several research problems with patience, intelligence and
hardwork, which I think will help me to overcome any problems in life as well as in research.
I am grateful to God and my parents for whatever I am today
Education :
B.Sc Physics, 2001-2004, Anna Adarsh College For Women, Madras University
M.Sc Materials Science, 20042006, College of Engineering, Anna University
Ph.D Metallurgical and Materials Engg., 2007-Ongoing, IIT Madras
E-mail id : debalina1983@gmail.com
John Felix Kumar R
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Dr. Prathap Haridoss
Title of thesis : Enhanced surface properties and electrochemical durability of multistage PTFE treated gas
diffusion layers for proton exchange membrane fuel cells
Thesis abstract : The main objective of research is to study the degradation of carbon based gas diffusion layers
of Proton Exchange Membrane fuel cells and to study the impact of aging on material properties under PEM fuel
cell conditions. Degradation of the GDLs is studied in terms of surface chemistry changes due to formation of
strong functional carbon oxides such as carboxyl which makes surface of the GDL wettable. Hydrophobicity of
GDL is lost during the course of the operation of PEM fuel cell which causes flooding inside the cell resulting in
mass transfer issues. The present study compares the degradation of GDL by electrochemical and chemical
aging under simulated PEM fuel cell conditions in terms of hydrophobicity loss. Corrosion rate of GDLs are
studied by potentiostatic aging response and the extent of electrochemical oxidation is understood from
potentiodynamic (Cyclic voltammetry) analysis. The surface carbon oxygen functional groups responsible for
increasing the wettability of GDLs are confirmed by X-ray photoelectron spectroscopy (XPS). Hydrophobicity loss
of GDLs is observed by surface contact angle and water uptake measurements. Influence of PTFE treatment on
aging behavior of GDLs is studied and the impact of novel multistage PTFE treatment on the electrochemical
durability of GDLs used in PEM fuel cells is examined. It is observed that it is possible to establish a gradient in
PTFE profile in the GDL by adopting multistage treatment. Such gradients counteract loss in hydrophobicity
resulting from carbon corrosion due to electrochemical aging. The results reveal that GDLs subjected to
multistage PTFE treatment can have increased lifetime as opposed to conventional single stage PTFE treated
GDL.
Skills :
Teaching
Managing people
Research interests :
Fuel cells and Battery materials
Polymers
Carbon nanotubes
Areas of interest : Materials Science and Electrochemistry
Publications/Conferences :
R. John Felix Kumar, V. Radhakrishnan and Prathap Haridoss. Effect of Electrochemical aging on the
interaction between Gas Diffusion Layers and the Flow Field in a Proton Exchange Membrane Fuel cell,
International Journal of Hydrogen Energy, Vol. 36, April 2011, pp. 7207-7211.
R. John Felix Kumar, V. Radhakrishnan and Prathap Haridoss. Enhanced mechanical and
electrochemical durability of multistage PTFE treated gas diffusion layers for proton exchange membrane
fuel cells, International Journal of Hydrogen Energy, Vol. 37, April 2012, pp.10830-10835.
R. John Felix Kumar and Prathap Haridoss, "Electrochemical aging of carbon cloth gas diffusion layer
under simulated PEMFC environment ", ISAEST 2010, Chennai.
R. John Felix Kumar and Prathap Haridoss, "Durability of S-PEEK and blended membranes under
humidity cyclingвЂќ,ISRS 2010, IIT Madras, Chennai.
R. John Felix kumar, P Kanakasabai, Abhijit P Deshpande, Susy Varughese and Prathap Haridoss,
"Durability assessment of PVA/SSA membranes using peroxide permeation rateвЂќ,FUCETECH 2009,
Mumbai.
R. Jagdeesh, U. Kamachi Mudali, K.R. Balasubramanian,R. John Felix Kumar and A.K.
Nath,"Development of Metal вЂ“ Ceramic alloy coatings on AISI 1045 by Laser ProcessingвЂќ. Fifth DAEBRNS National Laser Symposium (NLS-5), Dec 7-10, 2005, Vellore Institute of Technology, Vellore, India.
R. John Felix Kumar and S.Raman Sankaranarayanan,вЂњValue added oxides from metallurgical wastesвЂќ,
Presented at the 42nd National Metallurgists Day, 58th Annual Technical Meeting of the Indian Institute of
Metals, November 17 вЂ“ 19, 2004. Tiruvananthapuram.
About me :
Iam such a cheerful person having strong motivation on social values and capable of leading team of people. I
possess research attitude to expore things in new ways.I love to read, teach and experiment the things always.A
simple man with rich thoughts about nature.
Education :
M.Tech. Materials Science, 2002 - 2004, NIT, Trichy, Tamilnadu,
M.Sc., Chemistry, 1997-1999, St.Joseph's college, Trichy, Tamilnadu
B.Sc., Chemistry, 1994-1997, St.Joseph's college, Trichy, Tamilnadu
E-mail id : felix1976@gmail.com
S. Anand Kumar
Doctor of Philosophy (PhD)
Department of Metallurgical and Materials Engineering
Guide : Dr. S. Ganesh Sundara Raman
Title of thesis : Influence of Surface Modification Processes on Microstructure, Fretting Wear and Plain Fatigue
Life of Ti-6Al-4V and Alloy 718.
Thesis abstract : The present study describes the influence of different surface modification processes on
microstructure, fretting wear and plain fatigue behaviour of Ti-6Al-4V and alloy 718. Surface mechanical attrition
treatment (SMAT) and laser peening were employed has two different surface modification processes on both
Ti-6Al-4V and alloy 718. Surface modified Ti-6Al-4V and alloy 718 were characterised with wide battery of
characterisation techniques such as optical microscopy, scanning electron microscopy, transmission electron
microscopy, electron back scattered diffraction technique, x- ray diffraction technique, nano indentation etc.,
SMAT treated Ti-6Al-4V and alloy 718 samples shows better microstructural, mechanical properties, fretting wear
resistance and plain fatigue behaviour compared to laser peened Ti-6Al-4V and alloy 718.
Skills :
Robust process knowledge of surface engineering and heat treatment
Hands on experience on advanced characterization and analysis tools like SEM, EBSD, XRD,
experimental stress analysis, nano indentation, image analyzer, origin, Xpert Highscore etc.
Material characterization ( (OM, SEM, EBSD, TEM, XRD, Nano Indentation)
Excellent technical writing abilities (developed atlas of, stress-strain graph, micrographs and
fractographs. Technical paper publications in international journal)
Failure analysis and laboratory management.
Design of Experiments tools: Minitab, DOE pack
Regression Modelling: Artificial neural network
Working knowledge in Matlab
Research interests :
Surface Modification Processes
Material's Characterisation Techniques ( OM, SEM, EBSD, TEM, XRD, Nano Indentation)
Nanostructured Surface Materials
Severe Plastic Deformation Processes
Fatigue and Fracture
Tribology
Material's Testing
Heat Treatment
Areas of interest : Surface Engineering, Tribology, Fatigue and Fracture, Material Characterisation, Mechanical
behaviour of materials
Publications/Conferences :
Refereed International Journals
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., and Gnanamoorthy, R.,
вЂњFretting Wear Behaviour of Surface Mechanical Attrition Treated Alloy 718,вЂќ Surface & Coatings
Technology, vol. 206, (2012) pp 4425вЂ“4432.
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., and Gnanamoorthy, R.,
вЂњInfluence of Surface Mechanical Attrition Treatment on Fretting Wear Behaviour of Ti-6Al-4VвЂќ Advanced
Materials Research Vols. 463-464 (2012) pp 316-320.
Anand Kumar, S., Sundar, R., Ganesh Sundara Raman, S., Kumar, H., Gnanamoorthy, R.,Kaul, R.,
Ranganathan, K., Oak, S.M., and Kukreja, L.M., вЂњFretting Wear Behavior of Laser Peened Ti-6Al-4VвЂќ
Tribology Transactions 55 (2012) pp 615-623.
Anand Kumar, S., Ganesh Sundara Raman, S., and Sankara Narayanan, T.S.N.,вЂњEffect of Surface
Mechanical Attrition Treatment on Fatigue Lives of Alloy 718вЂќ Transactions of the Indian Institute of Metals
65(5) (2012) pp 473вЂ“477
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., and Gnanamoorthy, R.,
вЂњInfluence of Counterbody Material on Fretting Wear Behaviour of Surface Mechanical Attrition Treated
Ti-6Al-4VвЂќ Tribology International 57 (2013) 107вЂ“114.
Sundar R. , Harish Kumar , Rakesh Kaul , Ranganathan K. , Hedaoo P. , Raghavendra G. , Anand Kumar
S. , Pragya Tiwari , Dinesh C. Nagpure , Bindra K. S. , Lalit M. Kukreja and Oak S M.,"Studies on fatigue
life enhancement of Pre-fatigued Spring Steel Specimens using Laser Shock Peening" Metallurgical and
Materials Transactions A, Under review
International Conferences
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., and Gnanamoorthy, R.,
вЂњInfluence of Surface Mechanical Attrition Treatment on Fretting Wear Behaviour of Ti-6Al-4VвЂќ Oral
presentation, 2nd International conference on Advanced Material Research (ICAMR), 7th - 8th January
2012, Chengdu, China.
Anand Kumar, S., Ganesh Sundara Raman, S., and Sankara Narayanan, T.S.N., вЂњInfluence of Surface
Mechanical Attrition Treatment on Fatigue Life of Alloy 718вЂќ Oral presentation, 6th International
Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22nd - 25th January 2012,
Mamallapuram, India.
Anand Kumar, S., Ganesh Sundara Raman, S., and Sankara Narayanan, T.S.N., вЂњMicrostructure and
Mechanical Properties of Surface Mechanical Attrition Treated Ti-6Al-4VвЂќ, Proceedings, International
Symposium for Research Scholars (ISRS) on Metallurgy, Materials Science and Engineering, 20th - 22nd
December 2010, IIT Madras, Chennai, India.
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., Sakthivel,A., and Ananda
Murthy, R., вЂњInfluence of Surface Mechanical Attrition Treatment and Shot Peening on Fatigue Life of Alloy
718вЂќ Oral presentation, 3rd Asian Symposium on Materials & Processing (ASMP вЂ“ 2012), 30th & 31st
August 2012, IIT Madras, Chennai, India.
Anand Kumar, S., Ganesh Sundara Raman, S., and Sankara Narayanan, T.S.N., вЂњEffect of Surface
Mechanical Attrition Treatment Duration on Fatigue Lives of Ti-6Al-4VвЂќ, Oral presentation, 16th
International Conference on Strength of Materials (ICSMA 16), 19th - 24th August 2012, Bangaluru, India.
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., Gnanamoorthy, R.,
Sakthivel,A., and Ananda Murthy, R.,вЂњInfluence of Surface Mechanical Attrition Treatment and Shot
Peening on Fretting Wear Resistance of Ti-6Al-4VвЂќ Accepted for presentation, 5th International
Symposium for Research Scholars (ISRS вЂ“ 2012), 13th вЂ“ 15th, December 2012, IIT Madras, Chennai,
India.
National Conferences
Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., and Gnanamoorthy, R.,
вЂњFretting Wear Behavior of Surface Mechanical Attrition Treated Alloy 718вЂќ, Poster presentation, 65th
Annual Technical Meeting (ATM) of the Indian institute of Metals (IIM), 13th - 16th November 2011,
Hyderabad, India.
Anand Kumar, S., and Rajadurai, R., вЂњFatigue Life Predictions Welded Connections Using Fracture
Mechanics MethodsвЂќ, Oral presentation, COMAX - 2009, 20th - 21st April 2009, HKBK College of
Engineering, Bangalore, India.
About me :
Mechanical + Metallurgical Engineer with research experience in the areas of surface engineering, material
technology, material characterization, material testing, tribology, fatigue and fracture, heat treatment, failure
analysis, electron microscopy and laboratory management.
Education :
B.E in Mechanical Engineering, 2002-2006, Dr. AIT, Bengaluru
M.Tech in Manufacturing Engineering, 2007-2009, Anna University
E-mail id : anand.researcher@gmail.com
Ekta Jain
Master of Science by Research (MS)
Department of Metallurgical and Materials Engineering
Guide : Prof. Uday Chakkingal
Title of thesis : Influence of groove pressing on the drawability of AA 5052 sheets.
Thesis abstract : Aluminium alloy sheets have poor drawability compared to steel sheets as indicated by the
values of the plastic strain ratio or the R value (Lankford value). Because of the textures developed during
commercial annealing and cold rolling processes, the R value for aluminium alloys is typically less than 1. Thus
there is a need for processing techniques that enhance R values of aluminium alloy sheets. Since the R value is
heavily influenced by the crystallographic texture in the sheet, processes that develop a favourable texture can be
utilised to improve the R value. In this study, a severe plastic deformation process called groove pressing has
been used to repeatedly deform sheet specimens of aluminium alloy AA 5052. Annealed strip specimens of
dimensions 220 mm x 50 mm and 1 mm thick were cut in three orientations namely 0В°, 45В° and 90В° to the rolling
direction. A set of asymmetrically grooved dies of groove angle 45В° were used for groove pressing. The strip
specimens were groove pressed in compression mode and then flattened using the flat dies. The process was
repeated several times to impart large strain to the specimens. The thicknesses of the sheets remain largely
constant after the process. The R values of groove pressed specimens were experimentally determined as per
ASTM standard E 517-00. Tensile testing and micro structural characterization were also carried out. The
changes in the R value are correlated with the variations in the texture.
Skills :
Knowledge of various softwares like Origin, XвЂ™pert high score plus etc., which are require for material
characterization.
Hands-on experience in operating characterization equipments like XRD, TEM, Micro hardness
measurement as well as other equipments pertaining to research work.
Research interests :
Severe plastic deformation techniques (groove presssing), Al alloys.
Texture analysis and characterization.
Areas of interest : Aluminium alloys, Severe plastic deformation techniques, Characterization.
Publications/Conferences :
Jain, Ekta and Chakkingal, Uday, Evaluation of the groove pressing process for improving the drawing
quality (R-value) of 5052 aluminium alloy, International Conference in Deep Drawing, IIT Bombay, India,
November 2012. (Paper submitted)
About me :
I completed my B.E. (Mechanical engg.) from BIT, DURG (C.G.) in 2011 and joined IIT MADRAS as a MS
research scholar in the department of MME.
I am working under Dr.Uday and i am trying my level best to complete my work in June 2013.
I am friendly by nature and ready to help everyone by any possible manner i can.
Education :
B.E. in Mechanical Engineering, 2007-2011, Bhilai Institute of Technology, Durg, Chhattisgarh.
MS in Metallurgical and Materials, 2011-2013, IIT Madras.
E-mail id : ektajainatmech@gmail.com
Sandhya S
Master of Science by Research (MS)
Department of Metallurgical and Materials Engineering
Guide : Dr. Gandham Phanikumar
Title of thesis : Study on semisolid processed Aluminum alloy A356 for joining process
Thesis abstract : Semi-solid Aluminum alloy A356 is tungsten gas arc welded with cooling setup to study
variation in morphology of grains from that of base metal. Semi-solid forming is the process of shaping the metal
in the semi-solid state. As alloys solidify, the primary dendrites normally grow and coalesce with each other such
that, as soon as a relatively small fraction of the melt has frozen, viscosity increases sharply, and flow practically
ceases. In this research, the semi-solid metal (SSM) slurry of Aluminum A356 is prepared by linear
electromagnetic stirring (LEMS) setup in IISC Bangalore. During this process the dendrite growth is suppressed
by agitating the melt during solidification, reasonable fluidity persists and a strong fluid flow detaches the
dendrites formed at the solid-liquid interface and carries them into the mould to form slurry. When this slurry
solidifies, the microstructure is characterized by globular, non-dendritic primary phase particles, separated and
enclosed by a near-eutectic lower-melting secondary phase. Such alloy slurries flow in a laminar manner, which
allows for uniform die filling as opposed to the turbulent flow associated with casting processes. A three
dimensional finite element model SYSWELD is employed to analyze the temperature distributions in the weld
joints. Thermal properties like thermal conductivity, specific heat of aluminum A356, convection and radiation
boundary conditions are considered in the model. The numerical results of the model are utilized to correlate the
solidification substructure formed around the weld pool. The weld profile predicted by numerical analysis is
compared with that of the results obtained through experimentation.
Skills :
Solid Modeling : Solidworks
Finite Element Analysis : Sysweld
Research interests :
Study on semisolid formed Aluminium alloy
Finite element simulation of weld profiles using SYSWELD
Areas of interest : Semisolid processing, finite element analysis
Publications/Conferences :
About me :
Self-confidence
Ability to work under pressure
Team Player
Education :
B.E Production Engineering, 2006-2010, Madras Institute of Technology Campus, Anna University,
Chennai
E-mail id : sandhya_seshagiri@yahoo.com
Department of Ocean Engineering
Sharanabasappa C.sajjan
Doctor of Philosophy (PhD)
Department of Ocean Engineering
Guide : Prof.S.Surendran
Title of thesis : Study of moored vessel response optimizing moonpool shapes
Thesis abstract : Moonpools are vertical wells onboard vessels like cable-laying vessels and offshore support
vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission
requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on
shape, depth of the moonpool and frequency range of the waves to which the ship is exposed. The vessel
responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this
study as the mission requirement of the platform is to be in the particular location for long period of operation. It is
well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode and
sloshing mode. Moonpools of square, circular and rectangular shapes with different aspect ratios of opening like
1:1.5 and 1:2 ratios are tested to measure the responses. The vessel moored using heavy lines are modelled and
tested in the wave basin. The different modes of oscillations of water columns are measured using wave gauge
and the vessel response at a particular situation is determined. RAOs determined for various situations provide
better insight to the designer. Comparison, of experiments done in the wave basin, using a well known software
package meant for handling moored floating bodies is presented in this paper. The ambiguities of the result using
the said package programme are eliminated by verifying motion parameters obtained using experimental study.
Skills :
Solid modelling : Pro/E, CATIA, SolidWorks
Finite element analysis :ANSYS, Aqwa
Research interests :
Machining
Ship Hydrodynamics
Areas of interest : Machining
Publications/Conferences :
B.Rajesh Reguram1, Sajjan S.C 2 and S. Surendran 3 "RESPONSE OF A CONTAINERSHIP AT OUTER
ANCHORAGE" Proceedings of MARTEC 2010.The International Conference on Marine Technology,11-12
December 2010, BUET, Dhaka, Bangladesh.pp.439-444
Sajjan.S.C , S.Surendran "PISTON MODE EFFECTS OF MOONPOOL ON MOORED VESSEL RESPONSE"
MARTEC 2012. The International Conference on Marine Technology, 20-22 October 2012, UMT, Kuala
Terengganu,Malaysia
About me :
I am basically a Mechanical Engineering Graduate.
I have both Industrial and teaching experience.
I worked with industry in various fields, like maintenance of power looms. Worked with Swiss erector
Mr.Otto Houser for more than a month for erection of 15 and 10 yard embriodary looms.
Also have hands on experience on CNC Machining Centres,Turning Centres and Conventional Machines.
Worked as a Development Engineer for development of new components on Machining Centre. Also have
good knowldge in fixture design. Selection of tools for a perticular operation of machining.
Worked as lecturer in the Department of Mechanical Engineering, handled subjects like Design of Machine
Elements, Machine Drawing, Mechanical Vibration,Control Engineering,etc.,
Worked as a placement co-ordinator for Mechanical and Industrial Production Engineering Departments.
Education :
B.E Mechanical Engineering, 1989-1993, Karnataka University Dharwad,Karnataka
M.Tech Design Engineering, 2000-2002, Visveswaraya Technological University, Belgaum,Karnataka
E-mail id : sajjansc@gmail.com
Anuj Gupta
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Prof.S.K.Bhattacharya
Title of thesis : Analysis and Design of a floating offshore wind turbine
Thesis abstract : Increasing numbers of floating offshore wind turbines are planned and designed these days
due to their high potential in massive generation of clean energy from deeper water. In the present study for the
analysis of a floating offshore structure we use Ansys Aqwa and FAST for the Wind Turbine analysis Focus of the
present study is to couple the wind turbine loads on the Floating Offshore Platform. 1.5 MW wind Turbine is used
for this study.
Skills :
Software :- Ansys Aqwa, Patran, FAST, WAMIT, Matlab, Star-CCM+
Research interests :
Analysis and Design of offshore structures
Analysis and Design of a floating offshore wind turbine
Areas of interest : offshore structures, wind turbine
Publications/Conferences :
N/A
About me :
I am Anuj Gupta from Jhansi and pursuing my MS from Ocean Engineering Department.
I like playing Cricket, Listening Music
Education :
B.E Aeronautical Engineering, 2005-2010, AMAeSI
E-mail id : guptaanuj2@gmail.com
Aswin Vuddagiri
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr.Abdus Samad
Title of thesis : Aerodynamic analysis and optimization of symmetric wind turbine airfoil with a cavity.
Thesis abstract : A symmetric airfoil is chosen which is used in the application of wind turbines. The airfoil is
manipulated with a cavity placed on its upper surface. CFD analysis is carried out initially for monitoring lift
coefficeint, drag coefficeint, pressure coefficeint and lift-to drag ratio for different Reynolds number and differnt
angles of attack. The cavity shape, and its position along the chord of the airfoil is to be optimized for better
efficeincy of the airfoil.
Skills :
Ansys, CFD
C language
Design softwares
Research interests :
Computational fluid dynamics
Heat transfer
Renewable energy
Areas of interest : Heat transfer, Fluid mechancis, IC Engines, Turbomachinery
Publications/Conferences :
1. N. Sitaram, Aswin Vuddagiri, Rajesh Kumar Panda, S.K. Soren, "High temperature calibration facility for
multihole pressure probes", Proceedings of 38th National Conference on Fluid Mechanics and Fluid
Power, Bhopal, Madhya pradesh, 2011.
2. Aswin Vuddagiri, Abdus Samad, вЂњDelayed flow separation in airfoilвЂќ, 5th Int. Symp. on Fluid Machinery
and Fluids Engineering, Jeju, Korea, 2012.
3. Aswin Vuddagiri, Abdus Samad, "Aerodynamic analysis of wind turbine airfoil with cavity", Proceedings of
the International Conference on Energy resources and Technologies for Sustainable Development,
Howrah, West Bengal, 2013(paper accepted)
About me :
I am workaholic and able to work under pressure. My hobbies are
Playing various sports and games
Listening to music
Reading novels
my passion: driving bike crazily
Education :
B.tech Mechanical Engineering, 2004-2008, GITAM Unversity, Visakhapatnam, A.P
M.S Ocean Engineering, 2011-2013, IIT Madras
E-mail id : aswinvuddagiri@gmail.com
Chirag Madhusudan Khalde
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Prof. S. K. Bhattacharya & Prof. V.G. Idichandy
Title of thesis : Experimental and computational study of underwater vehicles
Thesis abstract : Resistance test was done on an axisymmetric body experimentally and computationally. Shape
Optimization done computationally using different Turbulent Models by Generating 3D Structured Hexa Mesh in
ICEM CFD and cell height near the walls was decided according to the turbulent model requirement. Model was
built and experiments were conducted in the towing tank to determine forces, centre of pressure and moments on
submerged bodies and Hydrodynamic Co-efficient. The error between the computational and experimental results
were found to be less than 8% for different turbulent models used (K?-SST and Ke- Realizable). Air Ejection: New
Drag Reduction Technique was used to achieve maximum drag reduction and optimum size and location of air
ejecting nozzle was established by using FLUENT13 Optimum Nozzle shape for maximum drag reduction was
established using CFD analysis Super Cavitation: Computational study on a selected AUV profile was done using
Schnerr- Sauer model in FLUENT13 and Strouhal no. was established which is a very important parameter in the
design of AUV. To ensure the accuracy of this model first this model was used for flow over hydrofoil and
validated with this Benchmark problem according to the literature.
Skills :
Computer Skills
Software: ICEM CFD (proficiency), Fluent, Starccm and Catman
Languages: Fortran 90
Platforms: Linux, Windows
Post processing: Tecplot 360
Awards
Won an Award of 10,000$ from Intellectual Ventures for Invention (USA) in 2012.
Won Mathematica Quiz at Shastraa 2010, a national tech fest of IIT Madras.
Achievements
All India Rank- 3 (99.73 percentile) in GATE-2009.
scholarship/grants awarded
Financial assistance from IIT Madras for attending international conference/workshop in Rome, Italy.
(2012)
Boeing Travel Grant for attending an International conference in Rome, Italy. This grant is awarded for
work related to Aerospace and Defence Engineering and/or Technology. (September 2012)
Boeing Travel Grant for attending an international conference in Kuala Lumpur, Malaysia. (June 2010)
Half-time teaching/research assistantship for Master of Science (by Research) since December 2009.
Membership of Professional bodies
Life Member of вЂњThe Aeronautical Society of IndiaвЂќ.
Co-curricular activities
General Secretary of Sindhu Hostel, IIT Madras. (May 2011- April 2012)
Member of Council of General Secretaries, IIT Madras (2011-2012)
Member of Student Activity Council (SAC), IIT Madras (2011-2012)
Representative for Mess tendering process and administrating one mess in auditing at Krishna Hostel.
Represented School and College as Captain of Volleyball team from 7th to 12th Standard at District Level.
Attended and volunteered in "International workshop on Submarine Design". 12th and 13th January,
2012.
Participated and volunteered in an International Conference on "Submarine Technology and Marine
Robotics" 14th and 15th January, 2012.
Presently Participated and volunteering in an International workshop on " Natural Gas HydratesExploration and Production" 7th - 9th August, 2012.
Keen interest in swimming, trekking and travelling.
Research interests :
Computational fluid Dynamics
Aerodynamics
Hydrodynamics
Rheology
Thermodynamics
Experimentational study on both models and prototypes
Areas of interest : computational and experimental aerodynamics/hydrodynamics, Aerospace, Turbulence,
Multiphase fluid flow, Axial Flow Machines, automobiles, waterjet hull interaction
Publications/Conferences :
Patent:
J. Sangwai and K.M. Chirag (note-both are first inventors), Novel couette geometry for measurement of insitu dynamic viscosity of multiphase systems such as emulsions and slurries: US patents (approved
Invention ID: IN-825082)
Chirag Khalde and Jitendra Sangwai, Oriented Rheometers for investigating the rheological properties of
emulsions and slurries: (communicated)
Chirag Khalde, S. K. Bhattacharya and V.G. Idichandy, Novel drag reduction technology implimentation on
underwater vehicles: (in process)
International Journal Publication
K.M. Chirag, K. Vijay, V. Raghavan and A.S. Rangwala, 2011. Smoldering Combustion of Biomass
Particles: Journal of Applied Sciences, 11: 1862-1866
International Conference
K.M. Chirag, S.K. Bhattacharya and V.G. Idichandy. Effects of Air Injection through Nose on Underwater
Vehicles: A novel Approach to Drag Reduction, 9th European Fluid Mechanics Conference (EFMC-9),
September 9th вЂ“ 13th 2012, Rome, Italy. (Presenter) (Accepted for presentation)
International conference of plant equipment and reliability, June 15th - 17th 2010, UTM Kuala Lumpur,
Malaysia. (Presenter and First Author).
About me :
I am from Talegaon(near pune), in maharashtra. My father is a retired Airforce personnel now and is busy
enjoying his life in farming. My mother is a household wife and takes care of all of us. I am in chennai from last 7
years for my both bachelor's and master's degree. I have inculcated the qualities of hard work and sincerity from
my parents who are always my inspiration and will use them forever for the betterment of my country.
Education :
X
XII (Science Stream)
B.E. (Aeronautical Engg.)
M.S. (Ocean Engg.)
E-mail id : chiragkhalde@gmail.com
Mount Saint Ann Convent High School
S.M.J.C
The Aeronautical Society of India
IIT Madras
2002-2003
2004-2005
2005-2010
2010-2012
Deepak Kumar Sharma
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Nilanjan Saha
Title of thesis : Numerical analysis of oscillating water column as a wave energy device.
Thesis abstract : The work investigates the numerical analysis of a novel axi-symmetrical floating structure
working as a wave energy device (WED). Wave energy is a non-polluting and renewable source of energy,
created by natural conversion of part of the wind energy above the oceans. Wave energy device face waves from
all directions and move in all the six-directions in which the heave response provides maximum energy. The
present concept of WED consists of a floater, a tube with larger thickness (TLT) for providing stability and a tube
with smaller thickness (TST) connecting the floater with the TLT (see Fig1). The floating concept of WED is
modelled and analyzed using the finite element software ANSYS-AQWA for power take-off and efficiency in
regular waves. A 100year wave condition is used for the study. The OWC is installed in 100m water depth with a
catenary mooring configuration to keep the structure in position and to allow heave motion only. The wells turbine,
having linear characteristic curves, as a power take-off system is modelled only as a point mass system. This
WED is modelled such that the water is allowed to enter inside the water column through an opening at the
bottom part. The TLT keeps the mean density of WED less than the water. Wave actions cause the WED to
oscillate and then water enters into the water column, compresses the trapped air inside the upper portion of the
water column which acts like a piston. The oscillations of the floater and the water column, apart from the heave,
are restrained. In order to provide the optimal power for design considerations, it is important to make estimates
of the hydrodynamic performance of the OWC under typical operating conditions. A parametric analysis of the
WED with respect to diameter of the floater, submerged length and height of the air chamber is performed in order
to obtain the optimum power extraction. All the above analysis is computed in time domain for a regular wave.
The results bring out the optimized power performance of the WED. Keywords: Floating OWC, wave energy
device, Power extraction, parameter optimization
Skills :
I know Ansys Aqwa, Wamit ,Modeling in Catia,Patran,Solidworks.
Good communication
Research interests :
Renewable Energy
Fluid structure interaction
Areas of interest : Renewable Energy, Fluid structure interaction, AERODYNAMICS, Propulsion
About me :
As a student i would like to introduce my self as a graduate member (Aeronautical Engineer) from Aeronautical
society of India who is pursuing his MS from department of Ocean Engineering and..
As a common man i belongs to jaipur(Rajasthan). I have some good habits and some bad habits, Love to watch
movies, work on computer, love to eat, love to enjoy everything around me, want to move ahead everytime in my
HQWLUHOLIH
Education :
B.Tech Aeronautical Engineering, 2005-2011, Aeronautical Society of India
E-mail id : deepaksharmaOED@gmail.com
Koshti Yuvraj Maruti
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. S Chandrasekaran
Title of thesis : Dynamic Analysis of Tension Leg Platform Under Extreme Waves
Thesis abstract : Recent observations of sea state that result in undesirable events confirm the presence of
extreme waves like freak waves which can either cause irreparable damages to offshore installations or create
inoperable conditions and discomfort to the crew onboard. Knowledge on extreme wave environment and related
wave-structure interaction is required for safer design of deep water offshore structures. In the current research,
typical long crested extreme waves namely i) New Year wave at offshore Norway; and ii) Freak wave at North
Sea are simulated using combined wave model. Dynamic response of offshore Tension Leg Platforms (TLP)
under these extreme waves is carried out for different wave approach angles.
Skills :
MS office 2007, matlab, Ansys Aqwa
Research interests :
Dynamics of Offshore structures
Areas of interest : hydrodynamics of offshore structures
Education :
B. Tech Aeronautical Engineering, 2003-2009, AMAeSI
MS Ocean Engineering, 2010-2013
E-mail id : yuvraj.koshti@gmail.com
Liladhar Ganesh Dhoble
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Anantha Subramanian V
Title of thesis : Numerical Simulation and Expt. Validation of Water-jet Propulsion System
Thesis abstract : 1) Water-jet propulsion systems use the reaction force of water expelled from nozzle to drive
the vessel. 2) They have relatively high Propulsive efficiency, good maneuverability, and low noise over
conventional propellers. 3) Therefore Water-jets are widely used for high speed vessels and tugs in shallow water.
4) In the present study inlet duct with nozzle is studied first to get insight of flow behaviour and then impeller is
used with former geometry to get the knowledge of complex flow behaviour due to impeller rotation. 5)
Experiments are done with model scale geometry and results are compared with that obtained from CFD(StarCCM+).
Skills :
Star-CCM+, C, Ansys ICEM CFD,
Research interests :
Marine Propulsion
Aerodynamics
FSI
Areas of interest : Marine propulsion, AERODYNAMICS, water-jet hull interaction.
About me :
1) I completed my school from Jawahar Navodaya Vidyalaya, and degree from Aeronautical Society of India.
2) I was all India topper for four subjets in my UG.
3) I like to take challenges, they inspire me.
4) I like to play car racing games and volleyball.
Education :
BE Aeronautical, 2005-2010, Aeronautical Society of India.
MS Ocean Engineering, 2010-2013, IIT Madras
E-mail id : liladhardhoble@gmail.com
Madhuri S Nannaware
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Srinivasan Chandrasekaran
Title of thesis : Dynamic analysis of Offshore Triceratop under seismic excitation
Thesis abstract : Offshore triceratops is an alternate and desirable structural form required to encounter the
environmental loads at ultra-deep waters; the requirement is vital as the oil and gas exploration is heading
towards greater water depths. Triceratop consists of deck structure with a positively buoyant leg structure (BLS)
connected through ball joint. Ball joint transfers only translational motions and restricts all rotational motions.
Offshore triceratops is significantly resistant to rotational motion because of the presence of ball joints between
the BLS units and the deck. Recent studies show that structures with universal joint show significantly lesser
response under the encountered environmental loads. Though seismic loading is not inherent for every offshore
platform due to the significant hydrodynamic damping, it is a mandate to consider seismic loads for extreme
loading conditions. Offshore complaint structures experience significant tether tension variations under the vertical
seismic excitations caused at sea floor. In the present study, time history of such tension variations that are
imposed on tethers by two different vertical seismic forces are considered; platform is subsequently analyzed for
the operational sea state under the changed pretension in the tethers. .
Skills :
Finite element analysis :ANSYS Aqua, Ansys Mech
Solid modelling : SolidWorks
Engineering Drawing : Autocad 2008
Subjects : Dynamics of offshore structures and Machinery
Theory of Machines and Mechanisms
Robotics and Automation
Research interests :
Design, Dynamics and analysis of offshore structures
computational sciences
Robotics and Automation
Areas of interest : Dynamics, Mechanical Vibration, Robotics and Automation
Publications/Conferences :
(communicated to journal and under review process) Srinivasan Chandrasekaran, Madhuri Nannaware,Madhuri
Seeram, Dynamic analysis of Offshore Triceratop under seismic excitation, Ship and Offshore Structures
About me :
I am a risk taker when all other follow the traditional path and I proved myself right uptill now.
I follow a simple equation in professional life i. e.
Profit + Growth = (Hard + Smart) Work +Skills
I love to dream, which always sets higher and higher goals in front of me
Education :
M S Ocean Engineering, 2011-13, IIT Madras
B E Mechanical Engineering, 2006-10, Pune University
E-mail id : madhuri_nannaware@yahoo.com
Manjunath G L
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : DR. S SURENDRAN
Title of thesis : STUDY ON FRACTURE AND FATIGUE CONTROL OF MARINE STRUCTURE
Thesis abstract : DEVELOPING A DATABASE FOR DYNAMIC FRACTURE TOUGHNESS OF MARINE
STRCUTURE PROPPOSING METHODS LIKES COMPOSITE PATCHING AND METALLIC COATINGS FOR
PREVENTIVE AND CORRECTIVE MANTAINANCE OF
STRUCTURE IN MARINE ENVIRONMENT.
INFLUENCE OF PATCHING AND COATING ON CORROSION CONTROL OF STRUCTURES IMPACT OF
COATING ON FATIGUE STRENGTH OF STRCUTURES IN MARINE ENVIRONMENT SIMULATION BY USING
PACKGES LIKE ABAQUS, FRANC 2D AND 3D
Skills :
SOFTWARE PACKAGES: ABACUS, ANSYS,
LANGUAGE: FORTRAN, MATLAB
Research interests :
FRACTURE AND FATIGUE ANALYSIS OF STRUCTURES SUBJECTED TO CORROSION
DYNAMIC ANALYSIS OF STRUCTURE
RELIABILITY OF STRUCTURE
HYDRAULIC FRACTURING
Areas of interest : FRACTURE, CORROSION AND FATIGUE ANALYSIS OF STRUCTURE
Publications/Conferences :
В·Manjunath G L and S Surendran. вЂњDynamic Fracture toughness of coated Structural ComponentsвЂќ
OMAE 2012 ASME 31st International Conference.
Manjunath G L and S Surendran. вЂњDynamic fracture toughness of aluminium 6063 with multilayer
composite patching at low temperaturesвЂќ International Journal of Ship and Offshore Structures.
About me :
Candidate with an excellent analytical and technical background seeking a challenging technical
position that encourages innovative solution approaches to problems in Engineering.
Education :
B.E IN MECHANCAL ENGINEERING, 2003-2007, UNIVERSITY B D T COLLEGE OF ENGINEERING,
KARANATAKA .
M.S BY RESEARCH IN OCEAN ENGINEERING, 2010-2012, IIT MADRAS, CHENNAI
E-mail id : glmanjunath.iitm@gmail.com
Mohit Goel
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Rajiv Sharma,Dr.S.K.Bhattacharya
Title of thesis : NURBS based Iso-geometric analysis for flow around contra-rotating propeller
Thesis abstract : NURBS based geometric modeling gives us more accurate representation of our Engg.
geometries which reducses the numerical error encountered during the modeling of the object because of its
accuracy. Same basis functions are being used to approximate the flow variables which give more accuracy with
higher continuty. In boundary integral equations to calculate the hydrodynamics of the flow which gives us
accurate results with less computational cost because in this method we mainly do computation on boundary of
the domain and the internal variables can be then post process using these solutions.
Skills :
Computer Language C,Fortran.
Software- Matlab,ICEM,FLUENT.
Research interests :
Computational Fluid Dynamics
Aerodynamics
Areas of interest : Computational Fluid Dynamics, AERODYNAMICS
Publications/Conferences :
N/A
About me :
I am from uttrakhand , Iwin president and governer award in scouts and guides during my higher secondary. I
secured all india 12th rank in gate 2009.
Education :
B.E. in Aeronautical Engg..,2005-2009,Aeronautical Society of India.
E-mail id : MohitGoel88iitm@gmail.com
Neeraj Aggarwal
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr.Nilanjan Saha
Title of thesis : Dynamic analysis of Floating offshore wind Turbine
Thesis abstract : The 5MW NREL wind turbine (Jonkman 2007) resting at top of a spar floater in water depth of
200m is studied numerically . The wind turbine along with the spar floater is modelled such that they can
withstand harsh wind and wave loading conditions. A 100 year wind and wave condition is taken for the study.
The hydrodynamic analysis is performed using ANSYS-AQWA software (ANSYS AQWA 2010) while the
aerodynamic analysis is done through FAST software (Jonkman 2007). The spar along with the turbine is
modelled as a rigid structure subjected to regular waves. The linearised hydrodynamic wave loading is computed
by using Morison equation. The hydrostatics and stability criteria are checked for the spar. Time domain analysis
is done for parked condition under extreme environmental conditions. The effect of mooring lines attached to the
fairlead point which will provide extra stiffness to the floating platform are also taken into the numerical study. The
motion of the platform is also very important to study that account for the efficient system so Simulations were
carried out to calculate the structural responses for the some regular sea states.
Skills :
ANSYS-AQWA, DNV-hydoD.
patran, catia.
FAST software
Research interests :
Floating offshore wind turbine(renewable energy)
Hydrodynamic analysis of floaters using Ansys Aqwa
Areas of interest : offshore structures
Education :
B.E Aeromechanical ,2005-2010, AMAesI
E-mail id : neeraj.iitms@gmail.com
Patel Akshar P
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Rajiv Sharma
Title of thesis : Design and development of an integrated CAD+CFD model for simulation based ship
hydrodynamic optimization problems
Thesis abstract : Simulation based ship hydrodynamic (SBSH) optimization combines conventional areas of
resistance and propulsion, sea-keeping, maneuvering, and computer aided design (CAD) + computational fluid
dynamics (CFD), and offers a remarkable possibility of the implementation of an integrated design process from
conception to design to production. development of SBSH demands a new paradigm for hydrodynamics research
in which CFD, CAD and CAE are conducted simultaneously for the benchmark geometries and conditions using
an integrated approach along with optimization methods, all of which serve as internal engine guaranteeing
simulation fidelity. In the present paper the fundamental constitutive elements of a SBSH environment are
presented and analyzed. Our focus is on complex engineering optimization problems which involve
computationally expensive objective functions and nonlinear constraints. We discuss advanced strategies to
reduce the overall computational efforts, optimization algorithms for nonlinear programming problems, and
NURBS based CAD techniques for shape variation and mesh manipulation. A simple verification and validation
(V&V) methodology for assessing errors and uncertainties in SBSH is also presented and it is primarily based on
the trends. Finally, we present two different SBSH models and discuss one design problem, i.e., optimal shape
redesign of a ship under real-world geometrical and functional constraints. To access the practicability of the
design, the experimental results of the optimized models are analyzed.
Skills :
Software: NAPA, SHIPFLOW, MATLAB, ICEM-CFD, FLUENT, SOLIDWORKS
Research interests :
Design Optimization
Computational Fluid Dynamics
Areas of interest : Design Optimization, CFD
Publications/Conferences :
Design and development of an integrated CAD+CFD model for simulation based ship hydrodynamic
optimization problems
About me :
I am from Gujarat and pursuing my MS from Dept. of Ocean Engineering.
I like sports over reading books and also watching Badminton and Tennis.
Education :
B.E Aeronautical Engineering, 2005- 2010, AMAeSI
E-mail id : akshpatels@gmail.com
Priyanka Jain
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Deepak Kumar
Title of thesis : 'analysis of structure in time-frequency domain'
Thesis abstract : Earthquake motions constitute random processes, the response of a structure to such motions
becomes non-stationary with time-varying statistical characteristics. The wavelet transform is used to find nonlinear response in time and frequency domain simultaneously subjected to non-stationary excitation. The
usefulness of wavelet scheme is demonstrated using multi-degree freedom systems.
Skills :
skilled in softwares like Auto-cad, Catia, Abaqus.
operating systems: windows Xp, windows 2000, linux, MS DOs.
coding in matlab.
Research interests :
Structural analysis
Non-linear dynamic analysis of Offshore Structures.
Seismic analysis of offshore structures.
Dynamics of offshore structures.
Areas of interest : structural analysis, Strength of materials, wavelet transform, hydrodynamics of offshore
structures
About me :
skilled in coding in matlab.
Excellent verbal and written communication skills.
Ability to deal with people diplomatically.
Willingness to learn.
Team facilitator.
Education :
B.tech Aeronautical Engineering, 2006-2010, Aesi.
M.S. ocean Engineering, 2011, IIT Madras.
E-mail id : pri.aero27@gmail.com
R Raghavendra
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Prof.S.Surendran
Title of thesis : NUMERICAL WIND-WAVE MODELING AND OPTIMIZATION OF SHIP MINIMUM TIME/FUEL
ROUTE.
Thesis abstract : Project(1):Numerical wind-wave modeling using Mike-21 and Wam-Cycle4 Numerical windwave modeling has been performed over total Indian ocean using MIKE-21 and WAm-cycle4,by giving input of
NCEP winds and ETOPO-2 Bathemetry,MIKE-21,WAM CYCLE 4 considered effect of Refraction, Diffraction,
shoaling, wave-wave interaction and Reflection give the output as Wave height,period,Direction ,swell
height,period,direction and wind directions in GLOBAL as well as regional Domains.These results has been
compared with buoy data at Cuddalore (India) location throughout the year of 2010,results can be applicable for
exploitation of natural resources, ship-routing, design of harbors, breakwaters and jetties, loading and unloading
of ship cargo and estimation of sediment transport and coastal and offshore structural activities.. Project(2):
Optimization of Ship Minimum Time/Fuel Routing Output wave parameters of MIKE-21,WAm-cycle4 used for
ship routing Ship Calm water resistance calculated using model test in towing tank,software packages and Coded
using matlab Ship Added resistance has been calculated using software package of MAXSURF, SEAWAY Seakeeping Analysis (R.M.S Roll, R.M.S vertical acceleration at forward point and bridge location,slamming,deck
wetness,pitch angle, RAO'S) has been calculated using packages like MAXSURF, SHIPMO-PC, ANSYS-AQUA.
Network Algorithm is written using all above conditions giving shortest path between any two ports in the ocean.
Skills :
Computer Packages: MIKE-21, WAM-CYCLE -4, MAXSURF, SHIPMO-PC, SEAWAY, ANSYS-AQUA
Program languages: MATLAB
Research interests :
NUMERICAL WIND-WAVE MODELING using MIKE-21 and WAM-CYCLE4
OPTIMIZATION OF SHIP MINIMUM TIME/FUEL ROUTING
SHIP HYDRODYNAMICS
Areas of interest : Analyst, Oean Off shore and Costal Engineering, Aerospace Industry
Publications/Conferences :
R.Raghavendra,S.Surendran."WAVE MODELING AND SIMULATION FOR INDIAN COASTAL LINE AND
BEYOND",8th international conferance (MARTEC-12) October20-22,Kuala Terengganu
,MALAYSIA.(presenter)
About me :
I am Raghavendra, I live in one of the beautiful city in south india, Chennai
I was born in Andrapradesh .I have spend my entire childhood over there only, schooling and college too.
I did my Graduation from Aeronautical Scociety of india, New Delhi in Aerodynamic Stream
At present I am doing Master of Science by Research from Ocean Enginneing in INIDAN INSTITUTE OF
TECHNOLOGY MADRAS, Chennai.
I was also trying my hand with this computer stuff.Somehow, I got so much intrested to learn differtnt
software packages.
I like to watch and play the cricket Games and also intrest in swimming
I like all kind of Music.In General,all type of music are my favorites except Rock.I don't like Rock much.
Education :
M.S(Master of Science by Research)
B Tech
India
E-mail id : aeroragahva@gmail.com
Ocean Engineering,
Aeronautical Engineering
2010-2013, IIT Madras
Aeronautical Scociety of
Saravanakumar . S
Master of Science by Research (MS)
Department of Ocean Engineering
Guide : Dr. Srinivasan Chandrasekaran , Dr. Rajamanickam Panneerselvam
Title of thesis : Hydrodynamic response of perforated cylinders in regular waves and their application in offshore
structures like Tension Leg Platform ( TLP )
Thesis abstract : Experimental and Numerical investigations are carried out on perforated cylinders. it is seen
that the forces on inner cylinder increases with the increase in porosity; however, there is reduction in the forces
on inner cylinder with the decrease in perforation size. Forces on inner cylinder reduce significantly with the
perforated outer cylinder for short period waves compared to that of long period waves. Because of Perforation
there will be reduction in Forces (Due to wave and Current) , reduction in VIV ( Vortex induced vibration ) .Hence
Perforation concept can be used in Offshore (Column of TLP ,Riser and Subsea Pipeline etc.) Experimental
results are validated with commercial CFD software STAR CCM+ A new retrofitting method of TLP members
using perforated outer cylinders; experimental investigations carried out on the scaled model of TLP show
significant reduction in complaint degrees-of-freedom of the platform. Reduction in tether tension is also seen in
such forms which is a derived benefit of stress relief mechanism in the tethers as well.
Skills :
Awarded National Merit Scholarship 2001(Scholar Number 1635/2001) by Government of India for obtaining 94%
marks in SSLC at rural area.
Awarded MHRD scholarship by Government of India for qualifying GATE exam.
State rank 21, school topper in SSLC and Second topper in HSC.
Obtained All India rank 70 in GATE 2010 (Engineering Science).
I hope i am good in academics, i want to apply this knowledge in my work.
Interms of computer skills,
MS office, Basic Knowledge in MATLAB
CATIA V5, Catman, STAR CCM+, Basic knowledge in ANSYS AQWA,
OrcaFlex (Learner)
Research interests :
Offshore structures
Fluid Structure interaction
CFD
Basic FEM
Areas of interest : offshore structures, Fluid structure interaction, CFD, Basic FEM
Publications/Conferences :
Saravanakumar Sampath , Yuvraj Koshti, Srinivasan Chandrasekaran, Deepak Kumar,
S.K.Bhattacharya.,2012., вЂњStrength and Durability test of HDPE Poly Floats for Carrying and storage
capacityвЂќ World Maritime Technology Conference, WMTC2012, May 29-June 1, 2012, Saint-Petersburg,
Russia
Srinivasan Chandrasekaran, Rajamanickam Panneerselvam, Saravanakumar Sampath.,2012.,"
Retrofitting of offshore tension leg platforms with perforated cylinders" Third Asian Conference on
Mechanics of Functional Materials and Structures (ACMFMS 2012)( Accepted )
About me :
I am doing ms in ocean Engg , i am intersted to work where i can use my knowledge in Engineering , experience
in my personal life. i want to constantly upgrade my knowledge and skills. I am decent human being.
Education :
Completed Aeronautical degree ; awarded by Aeronautical Society of India, with 58.9 % in Dec-2009.
Completed HSC (Tamil Nadu State Board) at Bishop Heber Hr.Sec. School, Trichy with 91.1% in 2003.
Completed SSLC (Tamil Nadu State Board) at Manickavasagar Hr.sec. School, Pandipathiram with 94%
in 2001.
E-mail id : sara.sampath@gmail.com
Department of Physics
Brajesh Tiwari
Doctor of Philosophy (PhD)
Department of Physics
Guide : Prof. M. S. Ramachandra Rao
Title of thesis : Structural, optical and magnetic properties of LnCrO3 (Ln = La, Gd, Dy, Ho, Y and Er)
Thesis abstract : Understanding of functional perovskite-type oxides ABO3 is of active research interest due to
its relevance to both fundamental and application related issues. Perovskite-like metaloxides have a great degree
of tolerance to adopt multitude of different structural distortions as well as coupling between charge, lattice and
magnetic (spin and orbital) degree of freedoms giving rise to extraordinary physical properties such as
ferroelectricity, (anti-) ferromagnetism, multiferroicity, colossal magnetoresistance, electronic and ionic
conductivity, high temperature superconductivity, half-metallicity etc along with wide compositional flexibility. So it
is of considerable importance to understand the coupling between spin, phonon, orbital degrees of freedoms and
underlying phenomenon. In my Thesis work entitled "Structural, optical and magnetic properties of LnCrO3 (Ln =
La, Gd, Dy, Ho, Y and Er)" it has been tried to understand the effect of structural distortions due to different ionic
radii of Ln-site ions in LnCrO3 keeping the crystal symmetry (space group: Pnma) unchanged on their optical and
magnetic properties as well as the coupling between different degrees of freedom like phonon, spin, orbital and
charge. We observe that predominent magnetic ordering is antiferromagnetic where ordering temperature (TN)
followes only orthorhombicity of unit cell and not on the magnetic moment on Ln-site ions while next-nearestneighbour interection depends on Ln-site magnetic moments. LaCrO3 shows optical phonon and dielectric
anamaly at antiferromagnetic transtion temperature confirming magnetoelectric coupling.
Skills :
Sol-gel and solid-state reaction method for preparation of inorganic complex oxide materials.
Experience on High-vacuum and thin film deposition techniques; Pulsed Laser Deposition (PLD) and
Magnetron sputtering.
Confocal Raman spectroscopy/imaging (CRM) and scanning probe microscopy (SPM).
Electrical measurement techniques: Impedance analyzer, ferroelectric loop tracer, magnetoelectric
coupling.
Magnetic measurements: vibrating sample magnetometer attached to physical property measurement
system.
Software/computational skills: Rietveld refinements using GSAS for structural analysis, XCrysden and
Diamond for crystal structure simulation, Origin lab and MATLAB for curve plotting and data fittings. MS
Office.
First-principal Density Functional Theory (DFT) for materials simulations and design using QUANTUM
ESPRESSO-4.2.
Research interests :
Magnetic Materials,Ferroelectricity, Magnetolelectric multiferroics, Strongly Correlated Materials, Phosphers for
lighting materials, Density Funtional Theory.
Areas of interest : Multiferroics, AFM, Magnetoresistance, Ferroelectricity, Computational material science based
on Density Functional Theory
Publications/Conferences :
K. S Kumar, C. Venkateswaran, D. Kannan, B Tiwari, M. S. R. Rao 'Mechanical milling assisted synthesis
of Ba-Mn co-substituted BiFeO3 ceramics and their properties' Journal of Physics D: Applied Physics 45
(41), 415302
Maneesh Chandran, Brajesh Tiwari, C.R Kumaran, Sunil K . Samji, S.S Bhattacharya, M.S.
Ramachandra Rao (2012), вЂ�Integration of perovskite PZT thin films on diamond substarte without buffer
layerвЂ™ . Phys.D: Applied Physics, 45, 202001-202005 (fast-track communication).
P. Thiyagarajan, Brajesh Tiwari, M. Kottaisamy, N. Rama and M.S.Ramachandra Rao (2009), вЂ�UV
excitable Y2-x-yGdySiO5:Cex phosphors for cool white light emissionвЂ™, Applied Physics A, 94,
607-612.(citation 5)
Shubra Singh, P. Thiyagarajan, K. Mohan Kant, Tirupathiah, B. Tiwari, N.Rama, M.M.K. Samy and M. S.
Ramachandra Rao (2007), Topical Review: вЂ�Structural and physical properties of ZnO based materials in
various forms: Bulk, thin film and nanoвЂ™ J. Phys.D: Applied Physics, 40, 6312-6327 (citation 52).
About me :
I am interested in learning and using my understanding and experience in developing and contributing for well
being.
Education :
B.Sc Physics and Geology, 2001-2004, University of Allahabad, Allahabad
M.Sc Physics 2004-2006, IIT Madras, Chennai
E-mail id : brajbabua@gmail.com
Ganeshraj C
Doctor of Philosophy (PhD)
Department of Physics
Guide : Dr. P.N.Santhosh
Title of thesis : Structural, magnetic, dielectric and magnetocaloric properties of RMn0.5Fe0.5O3 (R= Pr, Dy)
Thesis abstract : The structural, magnetic, dielectric and magnetocaloric properties of Polycrystalline samples
RMn0.5Fe0.5O3 (R= Pr, Dy), synthesized using standard solid state reaction method, were investigated. Both the
samples have found to have orthorhombic crystal structure with G type canted anti ferromagnetic structure.
Impedance spectroscopy studies indicate PrMn0.5Fe0.5O3 has very high dielectric constant at room temperature
than DyMn0.5Fe0.5O3 and it can be used for random access memories based on capacitive elements. Since the
magnetic and ferroelectric transition temperatures are close to room temperature both materials can be used as
multiferroics.
Skills :
Software
CASTEP - Density functional theory (DFT) based software to study about the electronic,
magnetic and optical properties of materials.
LABVIEW вЂ“ To interface and control various instruments with computer for automated data collection and
analysis of data.
Origin вЂ“ For analyzing data.
CrystalMaker вЂ“ Crystal and Molecular Structures Visualization software.
GSAS вЂ“ General Structure (Crystal and Neutron) Analysis System.
Latex вЂ“ Document preparation program for better presentation of documents.
Instrumentation
Hands on training in the use of
SQUID (Superconducting Quantum Interference Device) to study magnetic properties of materials.
LakeShore VSM 7410 (Vibrating Sample Magnetometer) for studying magnetic properties of
materials.
N4L PSM1735 (Newton4th Ltd, UK) impedance analyzer for studying dielectric properties of
materials.
PANalytical XвЂ™Pert Pro X-ray diffractometer for characterizing phase of materials at low and high
.
temperatures
Janis CCR (Closed Cycle Refrigerator- CCS-100/202) for producing low temperature down to 15 K
for studying resistivity and dielectric properties of materials
Cryomech LHe P18 liquid He Plant for producing Liquid He.
Research interests :
Multiferroics- Materials that simultaneously show ferromagnetism and ferroelectricity. In laptops, the
magnetic materials which stores the information and electical materials such as semiconductors which
process the information and our research is to combine magnetic and electrical properties in single
material, then one component would be able to do both jobs. It would obviously leads to reduction in size
to improve Miniaturization and also in energy savings with much reduced energy consumptions.
First principles calculations (DFT- Density Functional Theory) on perovskites and semiconductor materials
to understand about its structural, electronic, magnetic and optical properties.
Areas of interest : Magnetic and Semiconductor nanoparticles, Low temperature physics, Multiferroics,
Computational material science based on Density Functional Theory
Publications/Conferences :
C.Ganeshraj, Rabindra Nath Mahato, D. Divyaa, and P.N.Santhosh, Magnetic, electrical, transport and
structural investigations of orthorhombic perovskite Pr2FeMnO6, J. Appl. Phys, vol. 107, April 2010,
pp.09E305 (1-3) .
C. Ganeshraj, R. Pradheesh, and P. N. Santhosh, Structural, magnetic, transport and magnetocaloric
properties of metamagnetic DyMn0.5Co0.5O3, J. Appl. Phys. Vol. 111, February 2012, pp.07A914 (1-3).
About me :
I , C. Ganeshraj, am doing P.hD in physics at IIT Madras. I am a passionate, optimistic and dedicated person who
takes up challenging responsibilities with utmost enthusiasm. I am determined to succeed, to improve myself and
to expand on all of my skills and talents whenever the chance arises. I have a great amount of perseverance to
achieve my goal. My optimistic and planned approach in things I do is what driving me towards my success
Education :
Ph.D. (Physics), 2007 - to till date, IIT Madras, Chennai
M.Sc. Physics, 1998- 2000, N.G.M College, Bharathiar University
B.Sc. Physics, 1995-1998, N.G.M College, Bharathiar university
E-mail id : ganesh@physics.iitm.ac.in
Maneesh Chandran
Doctor of Philosophy (PhD)
Department of Physics
Guide : Prof. M.S. Ramachandra Rao and Prof. S.S. Bhattacharya
Title of thesis : Synthesis of CVD diamond thin films on carbide and non-carbide forming substrates and
fabrication of PZT/diamond heterostructures for applications
Thesis abstract : Majority of diamond applications require a highly adherent diamond thin film deposited onto a
non-diamond substrate. However, there are problems associated with the adhesion of diamond films on most of
the substrates, especially on non-carbide forming substrates. The intention of the present work is to explore the
possibility of realizing adhesive diamond thin films on carbide forming (Si and WC-Co) and non-carbide forming
(Cu and Al2O3) substrates for wear resistant, thermal management and surface acoustic wave device
applications.
Skills :
Hot filament CVD (M650, sp3 Diamond Technologies, USA)
Pulsed Laser Deposition system (Nd:YAG, 355 nm, Quantel)
RF magnetron sputtering unit
Thermal evaporation unit
Spin coating unit
Confocal Raman Microscope (Alpha 300, Witec, Germany)
Physical Property Measurement System (QD, USA)
Nanoindenter (Hysitron, USA)
Atomic Force Microscope (Dimension Edge, Bruker)
Field emission SEM (Quanta 3D, FEI)
High Resolution TEM (Technai F20, FEI)
Ferroelectric loop tracer (Radiant Technologies)
Impedance analyzer (Agilent-4294A)
Research interests :
Carbon based nanomaterials (Diamond, Graphene and CNT) and its applications
Semiconductor materials (SiC,Si, ZnO and GaN) and its applications
Electron Microscopy and Atomic Force Microscopy
Thin film deposition techniques (CVD, PLD and sputtering)
Areas of interest : Semiconductor device fabrication and characterization, Nano technology, Nanomaterils,
Atomic Force Microscopy, Biosensors
Publications/Conferences :
Maneesh Chandran and M.S Ramachandra Rao, Piezoelectric devices and methods for their preparation
and use, US Patent # 13/698, 625 (PCT/IB2011/003086)
Maneesh Chandran, Brajesh Tiwari, C.R Kumaran, Sunil K Samji, S.S Bhattacharya and M.S
Ramachandra Rao, Integration of perovskite PZT thin films on diamond substrate without buffer layer, J.
Phys. D: Appl. Phys. (Fast Track Communications) Vol. 45, 2012, pp. 202001.
Maneesh Chandran, C.R Kumaran, Sriram Vijayan, S.S Bhattacharya and M.S Ramachandra Rao,
Adhesive microcrystalline diamond coating on surface modified non-carbide forming substrate using hot
filament CVD, Mater. Express Vol. 2, 2012, pp. 115.
Maneesh Chandran, G.V Chakravarthy, S.S Bhattacharya, M.S Ramachandra Rao and M Kamaraj, A
comparative study on wear behaviour of TiN and diamond coated WC-Co substrates against hypereutectic
aluminium-silicon (Al-Si) alloys, Appl. Surf. Sci. (in press).
Durgalakshmi D, Maneesh Chandran, Geetha Manivasagam, M.S Ramachandra Rao, R Asokamani,
Studies on corrosion and wear behavior of submicrometric diamond coated Ti alloys, Tribol. Int. (in press).
Maneesh Chandran, C.R Kumaran, S.S Bhattacharya and M.S Ramachandra Rao, Chemical vapor
deposition of diamond coatings on tungsten carbide (WC-Co) riveting inserts, Int. J Refract. Met. H (under
review).
Ravikumar Dumpala, Maneesh Chandran, N Kumar, S Dash, B Ramamoorthy and M.S Ramachandra
Rao, Growth and characterization of integrated nano-microcrystalline composite diamond caotings, Int. J
Refract. Met. H (under review).
Maneesh Chnadran, Mohan Kant, N Rama and M.S Ramachandra Rao, PLD Growth of CNTs using a
Nanostructured Ni Buffer Layer: Dependence of H2 Partial Pressure, Mater. Res. Soc. Symp. Proc. Vol.
951,2007, pp. 0951-E06-15.
About me :
A self motivated quick leaner who adapts well to fast changing environments
Education :
PhD Physics, 2007-present, IIT Madras
MTech Solid State Technology, 2004-2006, IIT Madras
MSc Physics, 2001-2003, Cochin University of Science and Technology
BSc Physics, 1998-2001, University of Calicut
E-mail id : maneeshcn@gmail.com
Muvvala Krishna Surendra
Doctor of Philosophy (PhD)
Department of Physics
Guide : Prof. M.S. Ramachandra Rao
Title of thesis : Effect of particle size on magnetic and dielectric studies of magnetic nanoparticles.
Thesis abstract : My thesis work involves synthesis of nanoparticles with spinel strctures. By varying the particle
size I studied the magnetic, dielctric and magnetodielectric studies for applications. I have coated the
nanoparticles with hydrophilic and hydrophobic surfactants to study magnetic hyperthermia studies on these
ferrofluids.
Skills :
Chemical synthesis methods to prepare nanomaterials with organic and inorganic surfactants.
Hands on experience on High-vacuum, thin film coating units and ion beam lithography.
Expertise in handling and transferring liquid Helium (LHe) for attaining lowest temperature.
Good at troubleshooting the equipment [viz., вЂњphysical property measurement systemвЂќ and вЂњhigh
resolution scanning electron microscope with focused ion beam lithographyвЂќ].
Type writing in Higher (English)
Speaks English, Telugu, Hindi and Tamil.
Research interests :
Effect of magnetic dead layer on magnetic studies of magnetite nanoparticles
Magnetic and dielectric studies on cobalt ferrite nanoparticles
Bulk and nano comparison of magnetic studies on cobaltchromite
Growth of multilayer thinfilms for magnetoresistance (MR) studies
Areas of interest : Material Characterisation, Material Synthesis, Material Science, Magnetic and Semiconductor
nanoparticles
Publications/Conferences :
Krishna Surendra, M., D. Kannan and M. S. Ramachandra Rao, вЂњMagnetic and dielectric properties study
of cobalt ferrite nanoparticles synthesized by co-precipitation methodвЂќ MRS Proceedings, Volume
1368, 2011, mrss11-1368-ww11-40 вЂ“ 46.
About me :
I am self-motivated and able to work both independently and as well with people. I would like to obtain a
position where I can use my strong organizational skills, educational background, knowledge which will
contribute my years of experience that will allow me to grow personally and professionally and to work in a
creative and challenging environment.
Education :
M.Sc. Physics, 2005-2007, Sri Venkateswara University Tirupathi
B.Sc. Maths,Physics and Chemistry, 2002-2005, Acharya Nagarjuna University, Guntur
E-mail id : mkrishnasurendra@gmail.com
Pradheesh R
Doctor of Philosophy (PhD)
Department of Physics
Guide : Sethupathi K. and Sankaranarayanan V.
Title of thesis : Disorder induced Jahn Teller effect and exchange bias in the spin glass state of magnetoresistive
Sr2FeCoO6
Thesis abstract : My studies on this system revealed exchange bias effect which originates from a spin glass gro
und state. Jahn Teller effects and magnetoresistance are also investigated in detail.I have synthesized my sampl
es by sol-gel method and investigated spin glass and magneto-transport behaviour in these systems using SQUID
magnetometry. My thesis focuses on the spin glass behaviour of Sr2FeCoO6 (SFCO) due to bond frustration in
which exchange bias and a large magneto-resistance is observed. SQUID magnetometer (Quantum design, 7 T
2-400 K) was extensively used to study the spin glass behaviour (memory, aging and relaxation behaviour) and e
xchange bias. Structural studies were undertaken using x rays and neutrons.
Skills :
Computer : OS- Windows, Linux Tools - LaTeX, Origin, FULLPROF, Matlab
Research interests :
My research interests are in the area of strongly correlated magnetic oxides.
Areas of interest : Frustrated spin systems, Jahn Teller effect, Exchange bias, Magnetoresistance
Publications/Conferences :
Pradheesh R, Harikrishnan. S. Nair, C. M. N. Kumar, R. Nirmala, V. Sankaranarayanan, K. Sethupathi,
Observation of spin glass state in weakly ferromagnetic Sr2FeCoO6, J. Appl. Phys. , Vol. 111, issue 5 2011, pp
053905.
Pradheesh R, Harikrishnan. S. Nair, V. Sankaranarayanan, K. Sethupathi., Large magnetoresistance and Jahn
Teller effect in Sr2FeCoO6, Eur. J. Phys. B Vol. 85, Jul 2012, pp 260
Pradheesh R, Harikrishnan S. Nair, V. Sankaranarayanan and K. Sethupathi, Exchange bias and memory effect
in Sr2FeCoO6, Appl. Phys. Lett., Vol. 101, Oct 2012, pp 142401.
About me :
Avid reader, interested in watching football and motorsports. Like to listen to
music esp. Jazz, psychedellic rock, Pop, etc.
Education :
PhD. Experimental condensed matter physics, 2006 - present, IIT Madras
MSc. Physics, 2000 - 2003, Mahatma Gandhi University
BSc. Physics, 1997-2000, Mahatma Gandhi University
E-mail id : r.pradheesh@gmail.com
Samji Sunil Kumar
Doctor of Philosophy (PhD)
Department of Physics
Guide : Prof.M.S. Ramachandra Rao
Title of thesis : Structural and optical properties of nano ink based CIGS and CZTS thin films for Photovoltaic
applications
Thesis abstract : Do all the single crystalline materials show better photovoltaic performance compared to their
polycrystalline counterparts? No. Grain boundries act as recombintion centers. As grain boundaries number
increase the photovoltaic performance decreases. But this is NOT ALL. There are certain class of materials,
chalcopyrites (CdTe, CIS, CIGS) which show better photovoltaic performance in their polycrystalline form.
Chalcopyites have unique grain boundary physics, where in the grain boundaries are electrically benign. This
reduces the rate of recombination, improves open circuit volage and hence phhotovoltaic performance. In, Ga in
CIGS are either less abundant or very expensive. So replacing In, Ga with Sn, Zn (which are relatively more
abundant and inexpensive) we realize a new chalcopyrite material CZTS with a direct band gap of 1.5 eV.
CIGS solar cells show a lab level efficiency of 20.5% (Co-sputtering). CZTS synthesized by chemical routes
show better performance (10%), compared to CZTS films grown by vacuum techniques. If CZTS has to
completely replace CIGS it has to demonstrate all the properties of CIGS including unique defect physics. My
research includes: Synthesis of CIGS and CZTS nano ink by hot-injection technique and deposition of thin films. Xray diffraction and Raman studies for phase identification TEM, SEM-EDAX studies for structural ,morphological
and compostion analysis. Scannig Probe microscopy (Conductive Atomic Force Microscopy, Electro Static Force
Microscopy) to understand grain boundary physics in CZTS Growth and characterization of CdS, ZnO thin films
by Chemical Bath Depositin (CBD) and sputtering respectively for electrical properties study and device
fabrication.
Skills :
Pulsed laser Deposition,DC/RF sputtering
High resolution scanning electron microscope (HRSEM-FEI)
Energy dispersive spectroscopy (EDS-EDAX)
High resolution transmission electron microscope (HRTEM -Tecnai-F20)
SPM (Dimension edge - Bruker)
Confocal Raman spectrometer (Witech)
XRD (PANalytical & Rich Seifert P3000, Germany)
Computational and software skills: Origin, Matlab, X'pert highscore, Diamond software, Nanoscope
analysis, C-programming
Research interests :
Cu2ZnSnS4 (CZTS), CuInGaS2 (CIGS) and CdS chalcopyrite based materials for Photovoltaic
applications
Synthesis of CZTS,CIGS Nano-ink for Photovoltaic applications
Scanning Probe Microscopy studies on and CZTSand CIGS thin films - unerstanding grain boundary
Physics
Electron Microscopy- Microstructure studies and composition analysis
Thin film gowth techniques-PLD, sputtering, Spin coating and CBD (chemical Bath Deposition).
Areas of interest : Scanning probe Microscopy, Electron Microscopy, Photo luminescence, Grain boundary
physics in chalcopyrites
Publications/Conferences :
Shubra Singh, Sunil Kumar Samji and M.S.Ramachandra Rao, Synthesis of CuInGaS2 nano-ink for
photovoltaic applications, Journal of Experimental Nanoscience, 7, 1-6, 2012
Shubra Singh, Sunil Kumar Samji, Kannan. D and M.S.Ramachandra Rao, Growth of nanocrystalline
CuInS2 tubes from Cu2S-CuInS2 heterostructured hexagons for photovoltaic applications (communicated)
Maneesh Chandran, Brajesh Tiwari, Kumaran, Sunil K Samji, S.S. Bhattacharya and M.S.Ramachandra
Rao, Integration of perovskite PZT thin film on diamond substrate without buffer layer , J. Phys. D: Appl.
Phys. 45 202001.
About me :
Let there be light ......
Let there be electricity.....
Let there be electricity from light !
Guess what ?...............if your guess is solar cells it is correct.! I work on thin films for photovoltaic applications. Xray diffraction, Raman spectroscopy, Electron microscopy/diffraction, Scanning probe micrscopy coupled with thin
film deposition techniques are bread and butter of my research routine.
I believe in "Independent thinking and collective working. Research
should bring out innovative ideas which should pave a way for business venture which on a large scale should
generate employment as well as improve the technological acquaintance of a nation, add to the skilled work force
and in the long run boost the economy of the nation". I would like to be an integral part of a team/organization with
such a mission and vision and contribute myself to the team work.
Education :
MSc, Physics, 2005-2007, Sri Venkateswara University
BSc, Maths, Physics and chemistry, Sri Krishna Devaraya University
E-mail id : sunil.meson@gmail.com

Download Report