niCe giRo poweRful, pRaCtiCal and innovative

NICE GIRO
powerful, practical
and innovative
txt
Rolling shutter
automation systems
GIRO
230V
120V
For balanced rolling shutters.
Irreversible electromechanical gearmotor
with up to 170 kg lifting power
(340 kg with additional optional motor).
Unbeatably flexible use and less inventory to keep in stock:
a single model that is designed to take a 76mm rolling shutter
shaft but can be easily adapted to take a 60 or 48mm shaft,
covering the full range of most commonly used sizes.
Technologically innovative: the brake is built into the gearmotor
and results in much smoother operation than the traditional
solution.
Code
gr170
Unbeatable safety: by virtue of the GRA04-GRA06
spring box with anti-fall device.
gr170E01
For all markets: 230 and 120V versions available.
gr170/V1
Quick and easy installation
During installation, the motor is supported on the shaft
thanks to the practical guided coupling.
Easy limit switch adjustment: automatic limit switch
adjustment is achieved by simply operating the rolling
shutter without any load, with the motor released,
and then just fine-tuning the system manually.
Simple system for releasing both motors at the same time.
Recommended control units: Mindy A01 and A02.
The outside diameter of the gear can be adapted from 200 mm
to 220 or 240 mm, allowing installation on most
rolling shutters.
Powerful: standard torque of 170 Nm; the additional GRA01
motor can be added at any time, even on site, effectively doubling
the weight that can be lifted (for a total torque of 340 Nm).
Practical: limit switches
for both closing and opening,
easy to adjust
Description
230 V IRREVERSIBLE, WITH BUILT-IN BRAKE AND RELEASE DEVICE,
WITH UP TO 170 Nm LIFTING POWER
230 V IRREVERSIBLE, WITH BUILT-IN BRAKE AND RELEASE DEVICE,
WITH UP TO 170 Nm LIFTING POWER,
POWER CABLE, 5 m LONG, INCLUDED IN BOX
pACk./pAlleT
44
120 V IRREVERSIBLE, WITH BUILT-IN BRAKE AND RELEASE DEVICE,
WITH UP TO 170 Nm LIFTING POWER
44
Technical specifications
Code
Electrical data
Power supply (Vac 50 Hz)*
Absorption (A)
Power (W)
Performance data
Speed (rpm)
Torque (Nm)
continuous operating time (min)
maximum number of operations per day
Dimensional and general data
rolling shutter shaft diameter
outside diameter of the gear
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
gr170 - gr170e01
gr170/v1
230 - 50 Hz
1,9
430
120 - 60 Hz
4
455
8
10
170
4
10
76 - 60* - 48**
200 - 220* - 240**
20
-20 ÷ +50
Ø 200 x 380
7
* with adapter included in box
** with additional adapter (optional extra)
DIMENSIONS
INSTALLATION DIAGRAM
4
1. MOTOR
2. TRANSMITTER
3. PHOTOCELLS
4. FLASHING LIGHT
5. CONTROL UNIT
6. KEY-OPERATED
OR DIGITAL SELECTOR
1
200
Versatile: can be used
with 76, 60 and 48mm
shafts
6
380 mm
5
200
Strong:
100% aluminium housing
44
3
380 mm
2
Nice recommends customers order products in pallets in order to facilitate storage and delivery, and ensure packs are uniform. The number of packs per single pallet has been specified for this reason. Approximate draft.
Control units
A01
SEMIAUTOMATIC 230V
control unit FOR GIRO
WITH SINGLE OR TWIN
MOTOR.
PC/PACK 1
Mechanical accessories
A01/V1
SEMIAUTOMATIC 120V
control unit FOR GIRO
WITH SINGLE MOTOR.
A02
AUTOMATIC 230V control
unit FOR GIRO WITH SINGLE
OR TWIN MOTOR.
PC/PACK 1
PC/PACK 1
MOSEU*
Surface-mounted key
selector, European
cylinder.
MOSIU*
Recessed key selector,
European cylinder.
MOSE*
Surface-mounted
key selector.
PC/PACK 1
PC/PACK 1
gra02
adapter for 48mm shaft.
PC/PACK 1
Optional additional motor
GRA03
adapter for 240 mm gear
diameter.
PC/PACK 1
gra04
spring box with built-in
anti-fall device, gear
diam. 200 mm, shaft diam.
60 mm.
gra06
spring box with built-in
anti-fall device, gear
diam. 240 mm, shaft diam.
76 mm.
gra01
additional motor
for GR170, complete
with accessories for
simultaneous release.
gra01/V1
additional motor
for GR170/V1, complete
with accessories for
simultaneous release.
PC/PACK 30
PC/PACK 25
PC/PACK 1
PC/PACK 1
KIO*
Key selector for
low-voltage contacts,
with release mechanism
for metal cable.
TS
Signboard.
Selectors
es-k59
aluminium key switch/
switch lock box with
control and release
button
PC/PACK 1
PC/PACK 1
MOSI*
Recessed key selector.
PC/PACK 1
PC/PACK 1
PC/PACK 1
* For use in conjunction with A01 and A02-series control units
Numerous advantages: practicality and safety
Quick and easy installation
During installation, the motor
is supported on the shaft thanks
to the practical guided coupling.
Unbeatable safety
the spring box with built-in anti-fall device,
GRA04 or GRA06, is the safest certified solution
for ensuring rolling shutter safety in all situations.
Once the anti-fall device has been triggered,
the rolling shutter can be opened or closed
without operating the shaft.
Nice SpA
Oderzo TV Italia
Ph. +39.0422.85.38.38
info@niceforyou.com
Find out more about Nice
products and services on the website:
www.niceforyou.com
INDUSTRIAL
DOORS
Systems for the automation
of industrial applications:
sectional and rolling doors,
high speed doors and
dock levellers.
Nice cares for the environment.
Using natural paper it avoids excessive use
of raw materials and forest exploitation.
Waste is reduced, energy is saved
and climate quality is improved.
PARK
SYSTEMS
Systems for the
management of off-street
car-parks. Versatile,
flexible and complete.
Born fully grown!
HOME
SYSTEMS
Integrated management
of home alarm and
automation systems.
The information shown in this publication is purely indicative. Nice reserves the right to make any modifications to the products as it sees fit.
SCREEN
Systems for the automation
of blinds, awnings
and sun screens.
The easiest way to get
the right light.
DEP15/EN
GATE&DOOR
Systems for the automation
of gates, garage doors
and barriers.
Product Design Roberto Gherlenda
NICE IS the simplest integration/
the widest range/the best control
electronics/the finest design/the most
AMAZING automation all together!

Download Report