Market Reports Center One Stop Market Reaserch Shop Automotive Fuel Delivery and Injection Systems Market Share, Size, Emerging Trends and Growth, Global Insights, Analysis and Forecasts 2016-2022 A new report published by Allied Market Research titled, World Fuel Delivery and Injection Systems Market - Opportunities and Forecasts, 2014-2022," projects that the world fuel delivery and injection systems market would reach $86,777 million by 2022 at a CAGR of 4.26% from 2016 to 2022. By fuel type, diesel systems occupied about half of the market share, in 2015 and is expected to maintain this lead throughout the forecast period. The port fuel injection systems and the direct injection systems injection types, collectively accounted for close to two-third the world fuel delivery and injection systems market in 2015. Browse full report with TOC@ https://marketreportscenter.com/reports/358568/world-automotivefuel-delivery-and-injection-systems-market-opportunities-and-forecasts-2014-2022 Fuel delivery and injection systems are vital parts in automobiles used for delivering fuels to the ignition chamber at a specified pressure and air-fuel ratio. The fuel delivery and injection systems are expected to witness significant growth during the forecast period. This is due to the increasing global sales of the automobiles, technological advancements in this field and increasing demand for fuel efficiency. Due to the low production cost and growing demand, the sales of these automobile systems is increasing in the developing countries such as China, India, South Korea and Taiwan in Asia-Pacific. However, the stringent environmental regulations of various governments restricting the size of these system are hampering the growth of this industry. Market Reports Center One Stop Market Reaserch Shop The passenger vehicle segment held the largest market share and acquired more than one-third of the total market in 2015. Light and heavy commercial vehicles together acquired about half of the market share in 2015. Diesel fuel dominated the world fuel delivery and injection systems market in 2015, while alternate fuels segment is anticipated to register the highest CAGR of 4.46% from 2016 and 2022. Strict emission norms against carbon content in the exhaust gases from vehicles is projected to hamper the market of diesel fuel type and encourage the growth of alternate fuel type segment during the forecast period. Changing demographics such as increasing population, increasing demand of personal transportation and emergence of new technologies is estimated to drive the growth of world automotive fuel delivery and injection systems market in coming years. Key findings of the study: Europe holds the largest market share, registering a CAGR of 4.02% from 2016 to 2022 Throttle body fuel injection segment is projected to grow at the fastest CAGR of 4.45% from 2016 to 2022 Alternate fuel segment, is expected to be the fastest growing fuel type segment in the market growing with a CAGR of 4.46% Among the different vehicle segments, hybrid vehicle is expected to witness the highest growth during the forecast period Asia-Pacific and North America show lucrative growth opportunities during the forecast period. Increase in the number of manufacturing facilities in the developing countries of Asia-Pacific coupled with the increasing demand in the region are key drivers for the growth of this region. The major countries contributing in the growth of Asia-Pacific are China, India, Japan and South Korea. However, low cost and the high volume of production of vehicles drives the fuel delivery and injection systems market in North America. In North America, Mexico is expected to record the highest CAGR of 4.76% during the forecast period. Request A Sample copy of This Report @ https://marketreportscenter.com/request-sample/358568 The major players profiled in this market are Robert Bosch, Continental AG, Hitachi Automotive Systems, MSD Ignition, Fuel Systems, Inc., Delphi Automotive PLC, and Denso Corporation, Ltd among others with the main strategy to be followed is product differentiation and innovation. Automotive fuel delivery and injection systems are used for storing and introducing fuel inside the automobile internal combustion engines. The system consists of many integral parts like sensors and Market Reports Center One Stop Market Reaserch Shop fuel pumps that assist air intake, mixing and supply of fuel. Fuel and engine efficiency are increased by optimizing the air-fuel ratio causing reduction in the exhaust gases. Technological advancements are continuously being done in the field to further enhance these systems contributing to the growth of the market. The current fuel delivery and injection systems market is changing rapidly. The key factor that is driving the market is the growth in sales across all vehicular segments. Also, the technological advancements aimed at improving the fuel economy and efficiency of the engine further boosting the market growth. The global sales of all vehicles steadily growing over the years, from 75 million in 2010 to 89.7 million in 2015. The growth in sales of vehicles is directly supplementing the growth of fuel delivery and injection systems market. Global Vehicle Sales 2005 2015, Global Automobile Sales The major restraint that can hinder the growth of this market is the increasing emphasis on the production and usage of the electrical vehicles and the supporting governmental policies for greener vehicles. The EV sales has gone great transformation in last few years from just 345 EVs sold in 2011 to about 114 thousand EVs sold in 2015, globally. The demand in EVs shall have regressive effect on the growth of fuel delivery and injection systems market. EVs are gradually having impact on all vehicle segments, outside passenger vehicle segment, further impacting the fuel delivery and injection systems market. Growth in Electric Vehicles Sales, Growth in EV Sales 2011 – 2015 Further, the introduction of stringent emission control norms such as Euro IV has induced spending on Research & Development for improved systems. The introduction of different fuel type available for the engines, including CNG, is providing big growth opportunity for the market. SALES OF NATURAL GAS VEHICLES GLOBALLY, 2000 2012 (MILLION) Sales of Natural Gas Vehicles Globally, Sales of CNG Vehicles The world automotive fuel delivery and injection system market encompasses vehicle type, fuel type and injector type of the Automotive fuel delivery and injection system market. The vehicle type segment namely Heavy commercial vehicle, light commercial vehicle, passenger vehicle and hybrid vehicle are covered under the scope of the report. The fuel types include gasoline, diesel and Alternative fuel types. The injector types include Port Fuel Injection, Throttle Body Fuel Injection, Direct Injection and sequential Fuel Injection. Based on geography, the world lithium-ion battery market is segmented into North America, Europe, Asia-Pacific, and LAMEA. Further, the report also covers the strategies adopted by key market players in order to sustain competitive environment and increase their market share. Continental AG, Robert Bosch GmbH, Delphi Automotive Plc., Magneti Marelli, Denso Corporation, Market Reports Center One Stop Market Reaserch Shop Infineon Technologies AG, TI Automotive INC. and NGK Spark Plug Co. Ltd. are some of the major players discussed in the report, which cater to the lithium-ion battery industry. On-going advancements in the automotive fuel delivery and injection systems due to innovative efforts have further enhanced the efficiency of these batteries. The competitive advantages of automotive fuel delivery and injection systems over conventional alternatives have been also described in the report. In order to understand the market, drivers, restraints, and opportunities are explained in the report. Further, the key strategies adopted by potential market leaders to facilitate the effective planning have been also discussed under the scope of the report. Automobile fuel delivery and injection system industry can be segmented into different categories based upon the vehicle types used by the consumers. The vehicle type is basically divided according to their usage. The different categories being the light commercial vehicles, Heavy commercial vehicles, Passenger Vehicles and Hybrid vehicles. The Fuel Delivery and Injection Systems are differentiated into these segments as the components are different, depending upon the vehicle. To Get Discount On The Report @ https://marketreportscenter.com/request-discount/358568 Connect for more details: Sam Collins Market Reports Center 1-646-883-3044 (US) info@marketreportscenter.com
The major restraint that can hinder the growth of this market is the increasing emphasis on the production and usage of the electrical vehicles and the supporting governmental policies for greener vehicles.
© Copyright 2024 Paperzz
