load control - Power Commander

THE ORIGINAL GROUND-BREAKING PERFORMANCE DYNO – DYNOJET!
Dynojet is proud to be the originator of real-world chassis dynamometer technology. Until the arrival of Dynojet into the world of chassis dynamometer technology, performance chassis
dyno-tuning was a relatively unused service that was out of reach for the typical performance shop, tuner, or enthusiast. Dynojet’s quest to find a suitable chassis dynamometer led to
the development of its own chassis dyno, which then laid the groundwork for dyno production and sales. Dynojet has a very unique position as the only dyno company that uses its own
dynamometers on a daily basis in the development of performance products and dyno technology.
Established in 1972, Dynojet is a Research & Development company, employing over 100 people in Montana, Nevada, Holland, Germany and England. Dynojet Research develops
aftermarket performance products and diagnostic tools for the Motorcycle and Automotive industries. Dynojet’s extensive product development testing required the use of a Dynamometer.
Unable to find a Dynamometer to meet the needs of the Research & Development staff, Dynojet went to the drawing boards and pioneered the first single roller, inertia, chassis Dynamometer
for motorcycles in 1989. Shortly thereafter Dynojet developed a computer interface and software package and began selling the first Model 100 Motorcycle Chassis Dynamometer. The
Model 100 proved to be affordable, reliable, accurate and above all, consistent. This was the case not only from one measurement to the next, but also from one Dynojet Dynamometer
to another, enabling communication and sharing of test data. The success of the Model 100 led to further developments in chassis dynamometer technology culminating with our current
Model 250ix Powersports dynamometer.
In the early 1990’s, the venerable model 248c Automotive chassis dynamometer was released to widespread acclaim and quickly became the “tool of choice” for the professional
tuner. Many Nascar Race Teams adopted the Dynojet 248 with Dynojet eventually becoming the Officially Licensed Dynamometer of NASCAR. Further innovations led to the smaller,
more compact design of the 224x dynamometer, and in 2003, the Eddy-Current equipped model 224xLC was released. The modular design of this 224 series was ideal for upgrades,
leading to the release of the 424x and 424xLC2 all-wheel drive dynamometers, which build on the proven 224x platform. With the Linx system, Dynojet has once again lead the dyno industry
with innovation.
CUSTOMER SUPPORT THAT MATTERS!
Dynojet Dynamometer Technical Support is unique. Unlike other companies who simply
sell their equipment – at Dynojet we use ours daily! This is important to dyno owners,
because as a leading aftermarket product development company, Dynojet technicians
have Real-World experience using the very dyno models they support. Whether it is
providing on-track dyno support to top-tier race teams, in-house product development
or after-hours personal tuning sessions, Dynojet technicians have the ability to provide
data analysis and interpretation in addition to advanced dyno support.
DURABILITY
We build the Dynojet Dynamometer to last. It is a durable, low maintenance instrument.
Our reputation and willing technical support are your guarantees that the Dynojet
Dynamometer will live up to our promises.
CREDIBILITY
With the Dynojet Dynamometer it is easy to establish credibility for your shop or business.
Before and after dyno runs on service or performance work help establish credibility.
Today’s customer wants to see proof that what he is paying for works.
The biggest names in the industry trust Dynojet as the “Industry Standard” – Names such
as: Shelby American, K&N Engineering, Magnaflow Exhaust, Roush Yates Performance,
SCT Flash, Graves Yamaha, Harley-Davidson, Yoshimura Suzuki, Powerblock on
SpikeTV, and too many too list.
THE WORLD STANDARD
The Dynojet Dynamometer is the most widely recognized chassis dynamometer with
more than 6,000 installations in over 60 countries. These installations include OEM
motorcycle manufacturers, importers, exhaust manufacturers, tuners, race teams, dealers,
service shops, motorcycle and ATV magazines. Dynojet has long term partnerships with
industry leading companies worldwide, ensuring local technical support for most of our
customers.
2 POWERSPORTS Dynamometers and Test Equipment
CHUCK GRAVES
PRESIDENT
GRAVES MOTORSPORTS
YES / MONSTER ENERGY - GRAVES YAMAHA
THE DYNOJET DYNO IS A MUST HAVE TOOL FOR EVERY SHOP THAT PERFORMS
DIAGNOSIS OR PERFORMANCE WORK. IN TODAY’S ULTRA COMPETITIVE
BUSINESS AND RACING MARKETS, WE MUST HAVE THE TOOLS TO NOT ONLY
COMPETE, BUT TO EXCEL! “TO DO WHAT WE DO AT GRAVES MOTORSPORTS
WOULD BE UNTHINKABLE WITHOUT A DYNOJET DYNO”
W W W . D Y N O J E T. C O M
TABLE OF CONTENTS
Inertia Only Dynamometer Models
Model 200i
Model 200ix
4-5
4
5
Load Control Dynamometer Models
Model 250i
Model 250ix
6-9
6-7
8-9
Specialty Dynamometer Models
10
Model SD12
10
Powersports Dynamometer Upgrades
Eddy Current Brake
ix Powersports Upgrade
Optional Hardware
11
11
11
11
New DynoWare RT
Standard Features
DynoWare RT Accessories
12-15
12-13
14-15
PowerCore Software Suite
WinPep 8 Dyno Control
WinPep 8 Data Center
C3 Tuning Software
16-18
16
17
18
Dynamometer Training
Power Commander Tuning Center
Power Vision Tuning Center
19
19
19
CONTACT INFORMATION
E-mail:
Phone:
Fax:
US - dynosales@dynojet.com
International - intdynosales@dynojet.com
Toll Free - 800-992-3525
Local - 702-399-1423
US - 702-399-6385
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
USED BY TOP RACE TEAMS AND TUNING SHOPS...
DOMESTICALLY
AND INTERNATIONALLY
TAUGHT ON
AT THE TOP SCHOOLS
POWERSPORTS
Dynamometers and Test Equipment 3 INERTIA ONLY DYNAMOMETERS
POWERSPORTS
The Model 200i continues the Dynojet tradition of providing a reliable, repeatable, consistent
and easy to use chassis dyno for quick and accurate diagnosing of performance problems.
The Model 200i offers an improved operator interface through the use of the integrated control
console, new WinPep 7 software and a wider platform for easy loading & unloading. Shop sales,
service work and credibility all benefit with a Dynojet chassis dynamometer.
A great feature of the 200i is that it can easily be upgraded to the Model
200ix,250i or 250ix at any time. This is especially important to new businesses.
They can begin with the 200i and upgrade as their business grows.
Dynojet’s inertia technology is the industry
standard for repeatability and consistency, so
you can tune the vehicle and not the dyno!
MODEL 200I SHOWN WITH
OPTIONAL DUAL AXIS FANS
STANDARD FEATURES AND EQUIPMENT
x x MEASURES UP TO 750HP AND 200MPH
x x SOFTWARE AND HARDWARE TO INTERFACE (PC, MONITOR, AND PRINTER NOT INCLUDED)
x x POWDER COATED CHASSIS WITH WHEELBASE CAPABILITY UP TO 84 INCHES (FROM REAR
AXLE TO LEADING EDGE OF FRONT TIRE)
x x INTEGRATED CONTROL PANEL STAND WITH CONSOLE
x x AUTOMATIC ATMOSPHERIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP,
HUMIDITY)
x x STARTER SYSTEM TO SPIN ROLLER (12V BATTERY REQUIRED)
x x INSTALLATION, OPERATION MANUALS AND SOFTWARE INCLUDED
x x ONE YEAR REPLACEMENT PARTS WARRANTY
ADDITIONAL PIT MODEL STANDARD EQUIPMENT
x x IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS
x x FRONT WHEEL LOCK
x x POWER CARRIAGE FOR BUTTON OPERATED WHEELBASE ADJUSTMENT
MODEL 200I SPECIFICATIONS
Maximum Horsepower
750 HP
Maximum Speed
200 MPH
Maximum Length
84 Inches
(Front of Front wheel to Center of Rear Wheel)
4 POWERSPORTS Dynamometers and Test Equipment
Drum Diameter
Drum Width
Drum Weight
Drum Concentricity
18 Inches
16.38 Inches
500 LBS
+/-0.001 Inch
Timing Accuracy Drum Speed Accuracy RPM Accuracy +/- 1 microsecond
+/- 1/100th MPH
+/- 1/10th RPM
W W W . D Y N O J E T. C O M
The Powersports Chassis Dynamometer gives you the
advanced technology, durability, and accuracy you need,
all at an affordable price.
By eliminating the need for engine removal, the vehicle mounting time is as little as 5 minutes. A
technician can then perform a simple test and examine the results right in the shop. Utilizing the
Dynojet WinPEP software, the dyno operator can evaluate the entire drive-train condition for the
purpose of routine servicing or all-out performance development.
The 200ix
dynamometer adds
an extra drum and
sliding carriage
to accommodate
ATV’s, Trikes,
Side-by-Sides,
and Motorcycles.
STANDARD FEATURES AND EQUIPMENT
x x MEASURES UP TO 750HP AND 200MPH
x x SOFTWARE AND HARDWARE TO INTERFACE (PC, MONITOR, PRINTER NOT INCLUDED)
x x DUAL PRECISION BALANCED DRUMS, MAIN DRUM WIDTH (16.38”) , AUXILIARYx
DRUM WIDTH (22”)
x x AUTOMATIC ATMOSPHERIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP,
HUMIDITY)
x x STARTER SYSTEM TO SPIN ROLLER (12V BATTERY REQUIRED)
x x INSTALLATION, OPERATION MANUALS AND SOFTWARE INCLUDED
x x DYNAMOMETER CHASSIS, OUTSIDE-TO-OUTSIDE DRUM WIDTHS: OUTSIDE (61”) AND INSIDE
WIDTH (22”)
x x IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS
x x ONE YEAR REPLACEMENT PARTS WARRANTY
ADDITIONAL PIT MODEL STANDARD EQUIPMENT
x x POWER CARRIAGE FOR BUTTON OPERATED WHEELBASE ADJUSTMENT
MODEL 200IX SPECIFICATIONS
Maximum Horsepower
750 HP
Maximum Speed
200 MPH
Maximum Length
84 Inches
(Front of Front wheel to Center of Rear Wheel)
Drum Diameter
Drum Width
Drum Weight
Drum Concentricity
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
18 Inches
16.38 Inches
500 LBS
+/-0.001 Inch
Timing Accuracy Drum Speed Accuracy RPM Accuracy +/- 1 microsecond
+/- 1/100th MPH
+/- 1/10th RPM
POWERSPORTS
Dynamometers and Test Equipment 5 INERTIA ONLY DYNAMOMETERS
MODEL 200IX SHOWN WITH OPTIONAL POWER CLAMP AND DUAL AXIS FANS
POWERSPORTS
Dynojet’s cutting-edge engineering delivers the precise horsepower measurements a technician
needs to make quick and accurate evaluations of engine and drive-train performance. This
allows you to maximize your shops potential with increased sales, service efficiency, and shop
credibility. The dynos’ durable, low-maintenance construction ensures that you will be investing
in many years of flawless tuning and troubleshooting.
LOAD CONTROL DYNAMOMETERS
POWERSPORTS
xx
CLOSED-LOOP CONTROL OF SPEED
OR RPM
xx
ABSORPTION UNIT CAPABLE OF 858
LB/FT TORQUE
xx
EASY-TO-USE SOFTWARE, PUSH
BUTTON OPERATION
xx
OPTIONAL CLOSED-LOOP TORQUE
CONTROL MODULE
xx
TEST VEHICLES AT FULL OR
PARTIAL THROTTLE
MODEL 250I SHOWN WITH
OPTIONAL POWER CLAMP DUAL
AXIS FANS AND MONITOR TRAY
JAMIE HANSON
SPEEDS PERFORMANCE PLUS
“OUR MOBILE DYNO CENTER IS CUSTOM DESIGNED AROUND DYNOJET’S MODEL 250, WHICH IS WITHOUT QUESTION THE
CENTER OF OUR BUSINESS. THIS INDUSTRY STANDARD DYNO IS THE ULTIMATE TOOL FOR PERFORMANCE TUNING AND DIAGNOSTIC TESTING.
IT ALLOWS US TO IDENTIFY AREAS OF PERFORMANCE LOSS, TUNE MOTORCYCLES TO ACHIEVE MAXIMUM HORSEPOWER FROM THE STOCK
COMPONENTS, AND ADJUST CARBURETION AND FUEL INJECTION WHEN ADDING AFTERMARKET PRODUCTS.”
6 POWERSPORTS Dynamometers and Test Equipment
W W W . D Y N O J E T. C O M
The Dynojet Load Control System was developed through years of experience with over 6,000 dynamometer installations
worldwide. The design is easy to operate and provides the function of steady state load control. Dynojet’s Load Control
System uses the latest in eddy current power absorption technology, which combines with our easy to use software, so
any technician can get repeatable, consistent results. The Load Control software provides the technician with the ability
to control vehicle RPM or Speed at any throttle opening. Through our exclusive closed-loop software design, the vehicle
is automatically held at your pre-determined setting.
STANDARD FEATURES AND EQUIPMENT
x x SOFTWARE AND HARDWARE TO
INTERFACE (PC, MONITOR AND PRINTER
NOT INCLUDED)
x x POWDER COATED CHASSIS WITH
WHEELBASE CAPABILITY UP TO 84
INCHES (FROM REAR AXLE TO LEADING
EDGE OF FRONT TIRE)
x x EDDY CURRENT LOAD ABSORPTION
UNIT
x x INTEGRATED CONTROL PANEL STAND
WITH CONSOLE
x x STARTER SYSTEM TO SPIN ROLLER (12V
BATTERY REQUIRED)
x x INSTALLATION, OPERATION MANUALS
AND SOFTWARE INCLUDED
x x ONE YEAR REPLACEMENT PARTS
WARRANTY
ADDITIONAL PIT MODEL STANDARD
EQUIPMENT
x x POWER CARRIAGE FOR BUTTON
OPERATED WHEELBASE ADJUSTMENT
x x FRONT WHEEL LOCK
x x AUTOMATIC ATMOSPHERIC
MODEL 250I SPECIFICATIONS
PAUL LANGLEY
SENIOR VICE-PRESIDENT
VANCE & HINES MOTORSPORTS
“CHASSIS-DYNO TESTING & TUNING IS A CRUCIAL PART OF OUR RACE
DEVELOPMENT PROGRAM AND WE USE THE INDUSTRY STANDARD - DYNOJET.”
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
Maximum Horsepower
750 HP
Maximum Speed
200 MPH
Maximum Length
84 Inches(Front of
Front wheel to Center of Rear Wheel)
Drum Diameter
18 Inches
Drum Width
Drum Weight
Drum Concentricity
Timing Accuracy
Drum Speed Accuracy
POWERSPORTS
16.38 Inches
500 LBS
+/-0.001 Inch
+/- 1 microsecond
+/- 1/100th MPH
Dynamometers and Test Equipment 7 DYNAMOMETERS
x x IGNITION WIRE INDUCTIVE
TACHOMETER PICKUP LEADS
CONDITIONS MEASUREMENT
(ABSOLUTE PRESSURE, AIR TEMP,
HUMIDITY)
LOAD CONTROL
x x MEASURES UP TO 750HP AND 200MPH
POWERSPORTS
WITH THE ADDITION OF THE OPTIONAL TORQUE CELL PACKAGE, THE
DYNO HAS THE CAPABILITY OF A MORE COMPLETE RANGE OF TESTS,
INCLUDING STEP AND SWEEP TESTS.
THIS IS AN EXAMPLE OF
THE “LOAD CONTROL” AND
“LOAD TESTING” SYSTEMS
MAKE RUN SCREEN.
USING THE OPTIONAL
TORQUE MODULE,
“REAL-TIME” TORQUE
CAN BE DISPLAYED.
The Dynojet 250ix provides the ultimate in powersports dyno tuning/testing capability. With
61” total drum width, the 250ix can handle UTV’s, ATV’s, karts, trikes and motorcycles.
Available for above-ground or pit installation.
POWERSPORTS
LOAD CONTROL DYNAMOMETERS
The Powersports Chassis Dynamometer gives you the advanced
technology, durability, and accuracy you need, all at an affordable price.
THE 250IX
DYNAMOMETER
ADDS AN EXTRA
DRUM AND SLIDING
CARRIAGE TO
ACCOMMODATE
ATV’S, TRIKES,
SIDE-BY-SIDES, AND
MOTORCYCLES.
DYNOJET’S EASY TO USE LOAD-CONTROL SYSTEM
SIMPLIFIES PART THROTTLE TUNING
STANDARD FEATURES AND EQUIPMENT
x x MEASURES UP TO 750HP AND 200MPH
x x SOFTWARE AND HARDWARE TO
INTERFACE (PC, MONITOR, PRINTER
NOT INCLUDED)
x x DUAL PRECISION BALANCED DRUMS,
MAIN DRUM WIDTH (16.38”) , AUXILIARY
DRUM WIDTH (22”)
x x DYNAMOMETER CHASSIS, OUTSIDE-TOOUTSIDE DRUM WIDTHS: MODEL 250IX
(61”) AND INSIDE WIDTH (22”)
x x IGNITION WIRE INDUCTIVE
TACHOMETER PICKUP LEADS
HUMIDITY)
x x STARTER SYSTEM TO SPIN ROLLER (12V
BATTERY REQUIRED)
x x INSTALLATION, OPERATION MANUALS
AND SOFTWARE INCLUDED
x x ONE YEAR REPLACEMENT PARTS
WARRANTY
ADDITIONAL PIT MODEL STANDARD
EQUIPMENT
x x POWER CARRIAGE FOR BUTTON
OPERATED WHEELBASE ADJUSTMENT
x x AUTOMATIC ATMOSPHERIC
CONDITIONS MEASUREMENT
(ABSOLUTE PRESSURE, AIR TEMP,
MODEL 250IX SPECIFICATIONS
Maximum Horsepower
750 HP
Maximum Speed
200 MPH
Maximum Length 84 Inches
(Front of Front wheel to Center of Rear Wheel)
Drum Diameter
18 Inches
Drum Width
16.38 Inches
Drum Weight
Drum Concentricity
Timing Accuracy :
Drum Speed Accuracy RPM Accuracy 8 POWERSPORTS Dynamometers and Test Equipment
500 LBS
+/-0.001 Inch
+/- 1 microsecond
+/- 1/100th MPH
+/- 1/10th RPM
MIKE DANIELS
DANIELS PERFORMANCE
DANIELS PERFORMANCE, LEADER IN HIGH PERFORMANCE HARLEY-DAVIDSON ©
EFI TRAINING WITH OVER 30 YEARS OF EXPERIENCE, RECOMMENDS AND
USES DYNOJET DYNAMOMETERS FOR THE TRAINING THEY PROVIDE FOR THE
HARLEY-DAVIDSON UNIVERSITY ©.
W W W . D Y N O J E T. C O M
LOAD CONTROL
POWERSPORTS
Dynojets cutting-edge engineering delivers the precise horsepower measurements
a technician needs to make quick and accurate evaluations of engine and drive-train
performance. This allows you to maximize your shops potential with increased sales,
service efficiency, and shop credibility. The dynos’ durable, low-maintenance construction
ensures that you will be investing in many years of flawless tuning and troubleshooting.
ATTACK RACING
THE DYNOJET DYNAMOMETER HAS BEEN THE BASIS FOR OUR COMPETITIVENESS IN AMA RACING. WE
ARE CONSISTENTLY AT THE TOP OF THE SPEED CHARTS IN BOTH DAYTONA SPORT
BIKE AND SUPERBIKE. AS SEEN AT DAYTONA, OUR RIDERS CAN EASILY PASS ON
STRAIGHTS AND ALL THANKS TO THE RELIABLE, REPEATABLE AND CAPABLE DYNOJET
DYNAMOMETER. IT IS AN IMPORTANT TOOL FOR NOT ONLY OUR RACING TEAM BUT
ALSO OUR SERVICE DEPARTMENT, THE ATTACK TUNING CENTER.”
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
MODEL 250IX SHOWN WITH OPTIONAL POWER CARRIAGE/
CLAMP, DUAL AXIS FANS, MONITOR TRAY AND IX RAMP
POWERSPORTS
Dynamometers and Test Equipment 9 DYNAMOMETERS
RICHARD STANBOLI
SPECIALTY
POWERSPORTS
DYNAMOMETERS
The SD12 has a clever fold-up design with rollers, enabling it to
be easily moved for use and storage, maximizing space inside
the work shop.
The SD12 comes with a folding ramp and foot activated brake
as standard features and can accommodate wheelbases from
60 to 74 inches. The SD12 uses our proven WINPEP 7 software
and Dynoware EX+ electronics for accurate and repeatable
measurement of horsepower, torque, and speed. The Dynojet
Air/Fuel Ratio Monitor can be used with the SD12.
The SD12 fulfills the need for a dynamometer designed for
the large and ever growing scooter market.
The SD12 has a clever fold-up design with rollers, enabling
it to be easily moved for use and storage, maximizing space
inside the work shop.
MODEL SD12 SPECIFICATIONS
Max Power:
25kW (33.5hp)
Max Torque:
45Nm (33.5lb-ft)
Max Speed:
175 km/hr (109 mph)
Total Length :
Unfolded with ramp down:
Unfolded with ramp up:
Folded:
132in / 335cm
99in / 251cm
21in / 533cm
Total width:
Folded:
Unfolded:
24in / 61cm
34in / 86cm
Total height:
Folded
Unfolded
83in / 211cm
24in / 61cm)
Weight:
(DYNAMOMETER ONLY)
Minimum and
Maximum Wheelbase:
60-74in / 152-188 cm
437lb / 198.22kg
Brake type:
Spring Applied Mechanical Band (MANUALLY FOOT OPERATED)
Power requirements: 10 POWERSPORTS Dynamometers and Test Equipment
110-220VAC
(DOMESTIC OR EU POWER)
RICHARD BRUCKNER
CEO - HIGH-GAIN TUNING
AFTER SEARCHING FOR A SCOOTER SPECIFIC DYNO I WAS COMING UP
EMPTY HANDED UNTIL SOMEONE ON A FORUM POINTED ME TO THE NEW DYNOJET SD12
RELEASE. AFTER SEEING THE FIRST PIC OF IT FOLDED UP I WAS SOLD. I ALREADY KNEW THE
GREAT DYNOJET HISTORY AND SINCE ALL THE MODULES ARE THE SAME IT WAS A HANDS
DOWN DECISION. WAREHOUSE SPACE ISN’T CHEAP AND TO BE PERMANENTLY
TAKING UP SQUARE FOOTAGE WAS NOT AN OPTION. 798 DYNO RUNS LATER
AND IT IS PERFORMING AS FLAWLESS AS THE DAY IT WAS SET-UP. WHEN
EXTREME ACCURACY IS NECESSARY TO FIND EVERY TENTH OF A HORSE
POWER IN THESE LITTLE ENGINES, THE SD12 IS THE BEST TOOL AVAILABLE.
W W W . D Y N O J E T. C O M
TORQUE CELL MODULE
Measures real-time torque, and allows sweep, step and custom load
simulation tests
The Eddy Current Load Absorption Unit can be upgraded
to any Dynojet inertia model, such as the 200/200i,
and enables the ability to perform loaded tests such as
closed-loop RPM step tests when tuning fuel-injection with a
Power Commander or Power Vision.
DUAL MULTI-AXIS
COOLING FAN SYSTEM
This integrated cooling fan system option has
adjustable arms and can move 1,800 CFM from each
fan. These fans are controlled from the control pod.
THE FOLDING RAMP OPTION
This option includes gas assist struts for one person
operation. The ramp features a dual-angle moderate
slope design to aid in loading/unloading lowered
and longer wheelbase motocycles.
SPECIALTY
POWERSPORTS
EDDY CURRENT LOAD ABSORPTION UNIT
THE POWER CLAMP & POWER
CARRIAGE OPTION
The Air brake can be added to the Model 200i or
200ix to quickly slow the drum after the run. This is
recommended when testing two-stroke motorcycles
which have poor engine braking.
This option allows the dyno operator to adjust the
carriage length and clamp the front wheel from the
control pod, while seated on the bike.
EXTENDED
CARRIAGE OPTION
MONITOR TRAY OPTION ATTACHED
TO CONTROL POD
This option is necessary for testing long wheelbase
motorcycles. Accommodates up to 102”, measured
from rear axle to the leading edge of the front tire.
The Monitor Tray supports the monitor, keyboard
and mouse. It is adjustable for optimum placement.
POWERSPORTS DYNAMOMETER X UPGRADE
The ultimate in versatility - The X upgrade is available
for all 200i/250i models and adds an second drum and
sliding carriage to accommodate ATV’s, UTV’s, Trikes
and motorcycles
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
POWERSPORTS
Dynamometers and Test Equipment 11 DYNAMOMETERS & UPGRADES
AIR BRAKE
SOFTWARE
DYNAMOMETER
POWERSPORTS
THE NEXT GENERATION OF DYNOJET DYNAMOMETER ELECTRONICS
AND SOFTWARE HAS ARRIVED.
STANDARD WITH NEW DYNAMOMETERS
AND AVAILABLE AS AN UPGRADE FOR
EXISTING DYNOJET MODELS. CONSISTS
OF ONE MAIN CONTROL MODULE
WITH EXPANSION PORTS TO HANDLE
ADDITIONAL DATA ACQUISITION NEEDS.
12 POWERSPORTS Dynamometers and Test Equipment
W W W . D Y N O J E T. C O M
• TWO INDUCTIVE RPM INPUTS (up to 30,000 RPM). x
Includes two (2) primary and one (1) secondary inductive RPM
cables for use with various ignition types including coil on plug.
• FOUR DJ-CAN (Dynojet Controller Area Network) EXPANSION PORTS x
To connect Dynojet performance electronics such as Power
Commander V, Power Vision and WideBand 2.
• TWO OPTICAL RPM INPUTS (up to 30,000RPM). x
For use with Dynojet Optical RPM accessory- (not included).
• TWO ATMOSPHERIC SENSOR INPUTS. x
Includes one (1) sensor for real-time
weather conditions measurement. Secondary sensor accessory available
for additional measurement (intake, air
box, etc.).
• 10 BUTTON ENHANCED SAMPLE
PENDANT x
For remote control of DWRT and
PowerCore
DYNAMOMETER
• FOUR INDEPENDENT 0-5V ANALOG INPUTS. Sensors not included. x
Accessory plug-and-play Dynojet Sensor Kits available for measuring
pressure (boost or fuel) and temperature (thermocouple amplifiers). x
Analog Sensor Cable Kit also available to connect customer supplied
sensors to DWRT. SOFTWARE
• ETHERNET COMMUNICATIONS
• WIRELESS NETWORK CAPABILITY. x
Connect a wireless router to DWRT to control the dyno and PowerCore using a laptop,
desktop or tablet PC. Update firmware and software through a internet network.
• TWO INFRARED TEMPERATURE SENSOR INPUTS.
• POWERCORE SOFTWARE SUITE WITH WINPEP 8 DYNO CONTROL , DATA CENTER x
AND C3 TUNING SOFTWARE INCLUDED WITH DYNOWARE RT.
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
POWERSPORTS
SIX DYNOWARE EXPANSION PORTS
POWERSPORTS
Dynamometers and Test Equipment 13 AFR-2 (Dual Air/Fuel System)
AFR-2 CAN BE DAISY-CHAINED WITH ADDITIONAL AFR2 MODULES FOR READING UP TO 8 AFR INPUTS. THE
MODULE HOUSES THE DYNOJET GEN4 AIR PUMP FOR
VIRTUALLY MAINTENANCE FREE SAMPLING OF AIR/FUEL
RATIO FROM THE EXHAUST.
DYNAMOMETER
POWERSPORTS
SOFTWARE
AFR-2 MODULE MEASURES UP TO TWO AIR/
FUEL RATIO READINGS SIMULTANEOUSLY!
IDEAL FOR V-TWIN ENGINES.
AFR-2 INSTALLED ON A 250I DYNO
Analog Channel Accessories
DWRT comes standard with four (4) analog inputs for 0-5v sensors. Sensor kits are available for connecting Dynojet analog sensors or customer
supplied sensors to DWRT.
• ANALOG SENSOR CABLE KIT- x
Includes four (4) complete harnesses for
connecting up to four customer supplied 0-5v
analog sensors to DWRT.
x
• -14.7-45PSI PRESSURE SENSOR KIT-
• 0-500F THERMOCOUPLE AMP KIT-
Includes one (1) thermocouple amplifier x
and harness.
Includes one (1) sensor and harness.
• 0-100PSI PRESSURE SENSOR KITIncludes one (1) sensor and harness. x
x
• 0-2000F THERMOCOUPLE AMP KIT-
Includes one (1) thermocouple amplifier x
and harness.
Inductive RPM
Connection Kit
This new harness kit aids dyno
operators in establishing engine
RPM signals with select
motorcycles. Each harness uses
OEM style connectors, plugs in-line
with the stock ignition system, and
the non-loomed wiring makes it
easy for the Dynojet Inductive RPM
to clamp onto. Works with several
motorcycles: Denso coil ignitions,
Ducati, KTM, Polaris, Can-Am,
BMW, Aprilia and Harley Davidson.
14 POWERSPORTS Dynamometers and Test Equipment
Stealth Extraction
Interface Kit
Includes professional grade Riv-Nut tool,
drill bit, and enough hardware to sample up
to 25 bikes! (Includes bolts, washers,
Riv-Nuts, specialty bolts, and billet manifold
interfaces.) Recommended to be used with
Dynojet Gen4 Exhaust Gas Pump.
Stealth Extraction Interface
Kit (No Riv-Nut Tool)
Includes drill bit, bolts, washers,
Riv-Nuts, specialty bolts, and billet
manifold interfaces.
W W W . D Y N O J E T. C O M
O2 Sensor Kits
HD Data Link
Optical RPM Sensor
Includes magnetic base, optical
sensor and reflective tape. Two
optical sensors can be connected
to DWRT.
Stream live vehicle data from Delphi EFI equipped models both
CAN and J1850 for use inside WinPEP 8.
DJ-CAN Devices
Dynojet Performance Products such as the Power Commander 5,
Power Vison and WideBand 2 utilize the Dynojet Controller Area
Network and can be connected directly to DWRT. This allows DWRT
and PowerCore software suite to use any of the data from the device
(depending on product, can include engine RPM, throttle position, air/
fuel ratio, boost pressure and more).
Infrared temperature sensor kit. Includes magnetic base, 0-500F
sensor and harness for measuring surface temperatures. Two IR Temp
sensors can be connected to DWRT.
Includes magnetic atmospheric sensor
with 20’ cable length. For use with the
second DWRT atmospheric channel
for reading temperature, humidity and
absolute pressure at air intake of
vehicle or elsewhere.
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
Components
Operating System
Processor
Memory
Hard Drive
Monitor/Graphics Card
Network Adapter
External Media
Printer
Minimum Requirement
Windows XP (service pack 3) or higher
Dual Core Processor, 2 GHz or faster
4GB System Ram
100GB or larger (54MB required for
program)
1280x1024 (SXGA) resolution or higher
1 free 10/100Mbps RJ45 Ethernet port
CD ROM drive
Printer, if prints are needed
POWERSPORTS
Suggested
Windows 7 or later
Intel Core i5 2.8GHz or faster
6GB System Ram or more
500GB or larger (54MB required for
program)
1600x900 resolution or higher
1 free 100Mbps RJ45 or Wireless
CD ROM drive
Color printer if prints are needed.
Dynamometers and Test Equipment 15 SOFTWARE
Remote Atmospheric Sensor
DynoWare RT/PowerCore Requirements
DYNAMOMETER
IR- Temp Sensor
POWERSPORTS
Includes one wideband O2 sensor with harness
for use with AFR-2 for dual air/fuel readings.
Available in a 6ft or 12 ft harness length.
SOFTWARE
DYNAMOMETER
POWERSPORTS
POWERCORE IS A NEW PC BASED APPLICATION THAT PROVIDES DYNOJET DYNO OWNERS WITH THE MOST ADVANCED TUNING
SOFTWARE PLATFORM AVAILABLE IN THE INDUSTRY! CONTROL THE DYNO, ANALYZE DATA, ADJUST/CREATE CALIBRATIONS AND MAPS
FOR DYNOJET PRODUCTS AND UTILIZE REAL-TIME ON-BOARD DATA FROM VEHICLES RUNNING ON THE DYNO
WinPEP 8 Dyno Control
Connects PowerCore to DynoWare RT (DWRT);
shows data live on gauges, starts/stops
sampling, and sets up other functions such as
load control and other dyno specific functions.
• SELECTABLE RPM SOURCE USED FOR LOGGING/LOAD CONTROL –
INDUCTIVE, OR DJ-CAN DEVICES SUCH AS THE POWER COMMANDER 5.
• CHANNEL SUPPORT FOR DJ-CAN DEVICES – READ AND SAMPLE LIVE
DATA FROM THE VEHICLE WHILE USING A POWER COMMANDER 5 OR
POWER VISION.
• EDITABLE GAUGE SCREEN WITH USER DEFINED DATA CHANNEL
SELECTION, SCALING AND MORE.
DWRT WIRELESS AND
NETWORK CAPABILITY
FOR USE WITH
LAPTOP, DESKTOP
AND TABLET PC’S
16 POWERSPORTS Dynamometers and Test Equipment
SELECTABLE AIR/FUEL DATA SOURCE
– DWRT AFR-2 OR DJ-CAN DEVICES
W W W . D Y N O J E T. C O M
WinPEP 8 Data Center
LOAD UP TO 12 DYNO RUNS OR
DATA LOGS, EACH OF WHICH CAN
CONTAIN UP TO 40 CHANNELS –
DWRT AFR-2 OR DJ-CAN DEVICES
Provides enhanced viewing and analysis tools for
dyno runs, DJ-CAN devices, .csv format data logs,
and 3rd party sources. Views include graph / trace,
table, and 3-D visualization.
• SYNCHRONIZE DATA CHANNELS FROM THE DWRT SYSTEM IN PERFECT
ALIGNMENT WITH CHANNELS FROM SUPPORTED SYSTEMS, GIVING THE
ABILITY TO “SEE” WHAT HAPPENED AND WHERE. BECOME A BETTER TUNER
AS A RESULT OF GETTING BETTER DATA.
POWERSPORTS
• CUSTOMIZATION OPTIONS ALLOW USERS TO ADJUST THE SOFTWARE
FORMAT AND VIEWING TO THEIR LIKING, AND PROVIDES BETTER EXPORT
VIEWING, PRINTING AND MORE.
• BACKWARDS COMPATIBLE TO ALL PREVIOUS WINPEP AND DOSPEP DYNO
RUNS, SO USERS CAN USE PREVIOUS DYNO RUN FILES.
SEND DYNO RUNS DIRECT TO EMAIL OR SOCIAL MEDIA.
GRID VIEW
DYNAMOMETER
DATA CENTER GRAPH WITH ANALOG INPUTS, BOOST AND FRP
DATA CENTER CSV LOG
SUPPORT
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
POWERSPORTS
Dynamometers and Test Equipment 17 TRAINING
DYNAMOMETER
POWERSPORTS
• CREATE MAPS WITH UP TO 30 TP (THROTTLE POSITION) COLUMNS
AND ANY VALUE THE END USER DESIRES.
• CONFIGURE ADVANCE MAPS LINKING MULTIPLE CYLINDERS
TOGETHER ALLOWING A 4 CYLINDER ENGINE TO USE THE DUAL
CHANNEL AUTO TUNE.
THE NEW C3 SOFTWARE TAKES THE FAMILIAR POWER
COMMANDER CONTROL CENTER SOFTWARE AND BRINGS IT TO A
NEW LEVEL. NOW THE END USER HAS FULL CONTROL OVER THEIR
POWER COMMANDER ALLOWING THEM TO CONFIGURE THEIR
SETUP IN AN INFINITE NUMBER OF WAYS.
DYNOJET’S PROPRIETARY TUNING LINK SOFTWARE, THAT
INTERFACES THE DYNO WITH A POWER COMMANDER FOR
EFFICIENT & SIMPLE EFI TUNING, IS NOW INCLUDED FOR NO
ADDITIONAL COST INSIDE C3!
INCLUDES INTEGRATED TUNING LINK SOFTWARE
• COMPARE MULTIPLE PCV MAPS SIDE BY SIDE
• DATA LOG ALL PCV CHANNELS. DISPLAY LOGS IN GRAPH FORM
THRU DATA ANALYSIS SOFTWARE.
• AUTOMATIC UPDATES THROUGH DYNOJET’S WEB SERVER.
TUNING LINK LIVE
CELL TRACE
STREAM LIVE DATA
18 POWERSPORTS Dynamometers and Test Equipment
W W W . D Y N O J E T. C O M
DYNAMOMETER TRAINING
Dynojet provides a “one day” class for one technician with every Dynamometer
purchase. Techniques for maximizing the profit potential of your Dynojet dynamometer
will be discussed. Classes are held monthly at our Las Vegas facility.
The Basic course covers Dynamometer operations including;
x x DYNAMOMETER SAFETY, AND ROOM SET-UP
x x DYNAMOMETER CHECK AND SERVICE
x x VEHICLE INSPECTION, LOADING AND UNLOADING ON THE DYNAMOMETER
x x WINPEP 7 SOFTWARE/COMPUTER USAGE
Current Dynojet dyno owners are also invited to attend this class to get up to date dyno
information and techniques. Space permitting, contact your Dynojet representative for details
On-Site Training Also Available!
On-site training at your facility is available for an additional fee. Training includes a
factory trained professional educating your staff on your dyno.
This is normally a two day training course at your facility. Please ask your Dynojet sales representative for more information.
APPROVED POWER COMMANDER TUNING CENTERS
THE POWER COMMANDER HAS BEEN THE #1 CHOICE FOR EFI TUNING EVER SINCE
FUEL INJECTION BECAME AVAILABLE AS ORIGINAL EQUIPMENT BY POWERSPORTS MANUFACTURERS.
This course certifies Dynojet Dynamometer owners (250 model and above) as “Dynojet Approved Power
Commander Tuning Centers”. It consists of 3-days of advanced Power Commander training taught at Dynojet
headquarters in Las Vegas. This is a combination of classroom and hands-on dyno time. The course covers
all models of Power Commanders and their accessories. Learn everything from proper installation to making
custom maps using a Dynojet dyno with Power Commander and dyno software. Power Commander Tuning
Centers are eligible for a discount on product.
This ½ -day training course available in your area or at your location (contact Dynojet for availability).
This course provides dealers with all of the information they need regarding Power Commander
sales and support.
CERTIFIED POWER VISION TUNING CENTERS
TRAINING
This 3-day training course held at Dynojet Research in Las Vegas, Nevada includes EFI theory and operation
for expert EFI calibrating, Power Vision WinPV software, Autotune Basic & Pro and custom EFI map development
using the Power Vision on the dynamometer. Certified Power Vision Tuning Centers are listed online and are
the only Dynojet approved tuning centers for customers seeking custom Power Vision tunes created on
a Dynojet dynamometer.
CERTIFIED POWER VISION DEALERS
This ½-day training course provides all the information needed regarding Power Vision sales and support.
Certified Power Vision Dealers are listed online as Approved Locations that can thoroughly support
Power Vision sales.
CONTACT DYNOJET FOR FURTHER INFORMATION OR TO RESERVE A SEAT (800) 992-3525 / TRAINING@DYNOJET.COM
TO L L F R E E : 1 - 8 0 0 - 9 9 2 - 3 5 2 5
POWERSPORTS
DYNAMOMETER
AUTHORIZED POWER COMMANDER DEALERS
POWERSPORTS
x x BASIC DYNAMOMETER RUNS INCLUDING ROLL-ONS, ALL-GEARS, AND FAST ACCELERATION.
Dynamometers and Test Equipment 19 CONTACT INFORMATION
E-mail:
Phone:
Fax:
US - dynosales@dynojet.com
International - intdynosales@dynojet.com
Toll Free - 800-992-3525
Local - 702-399-1423
US - 702-399-6385
BLACK
WHITE

Download Report