㈱ゼネラルサイエンスコーポレーション Vol. 3 「物理・物性値 標準物質総合カタログ」は、各国の公的機関が供給している工業原材料・工業製品の標準物質を従来 のメーカー別ではなく分野別に再収録し、ユーザー様の利便性を高めたデータベース的要素も兼ね備えた総合カタログで す。 製品によっては、分析値の変更・在庫切れ・供給終了の発生もございますので 詳細についてはお問い合わせ下さい。 製品の分析値についての不確かさ値は記載されておりません。 また、本リストに記載されている値はいかなる保証をなすものではありません。 あくまでご参考として下さい。 価格についてはオープン価格で行っておりますので、お手数でもお問合せ下さい。 株式会社 ゼネラルサイエンスコーポレーション 〒170-0005 東京都豊島区南大塚3-11-8 TEL. 03(5927)8356 FAX. 03(5927)8357 e-mail : standard@shibayama.co.jp web : www.shibayama.co.jp ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 1 ㈱ゼネラルサイエンスコーポレーション 物性値分析 編 目次 熱 分 析 DSC/エンタルピー/熱容量 Freezing Point Flash Point Melting Point 燃焼熱量 Solutioun Calorimetry 熱伝導 熱膨張 熱拡散 縦波音速 熱抵抗 Glass Liquid Temperature Tharmocouple Materials X 線 分析 ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ 3 3 4 4 4 5 5 5 5 6 6 6 6 ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ 6 6 7 7 ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ 7 7 8~9 ・・・・・・・・ 10 電気特性 シリコンの電気抵抗・伝導 ガラスの電気特性 Electrophoretic mobility 電気光学 密 度 密度分析:液体/固体 高 分 子/Polymer 分子量標準 ・・・・・・・・ 粘度 ・・・・・・・・ Melt Flow 融解流量 産総研 ポリマー ・・・・・・・・ Biomaterials ・・・・・・・・ 23~24 24 24 24~25 25 光学特性 粘 度 ガラス Viscosity Fixpoint Viscosity oil X線回折 ・・・・・・・・ 17 X線写真 ・・・・・・・・ 17 蛍光X線分析によるハンダ層の厚さ 17 蛍光X線薄膜試料・・・・・・・・ 18~19 EDS, WDS 分析 ・・・・・・・・ 20~22 分子吸光 ・・・・・・・・ 蛍光分子 ・・・・・・・・ 屈折率 ・・・・・・・・ 旋光光度 ・・・・・・・・ Special optical properties Colour measurment 26 26 26~27 27 28~29 29 イ オ ン 活 性 pH 計測 ・・・・・・・・ Biogical buffer system pD 計測 ・・・・・・・・ Ion selective Electrode calibration 電気伝導 ・・・・・・・・ 29 29 30 30 30~31 微 粒 子 ポリマー系 鉱物系 ガラス系 Particle counter Particle Biomaterials Colloidal Silica ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ 比表面積 10 11 11 11 11 12 ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ 15 15 15 Metrogy/度 量 衡 Optical Microscope SEM Depth Profiling Coating Thickness Surface flammability Cigarette ignition strength 31 31 工学分析 Microindentation Hardness Mechanical properties 31 32 Rockwell Hardness Tape Adhesion Testing Bleached Momnet Standard Magnetic Moment Standard FN Materials 32 32 33 33 33 12~14 Surface Finish Surface Roughness Abrasive wear Surface tension 火災特性 ゴム(rubber)、そ の 他 ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ ・・・・・・・・ Material for thin and sueface technology Superconducting critical current Microscale Dimension ・・・・・・・・ 15 15 16 16 16 16 17 エラストマー ・・・・・・・・ rubber/化合物 ・・・・・・・・ Chemical resistance Multi-test verification materials Relative humidity ・・・・・・・・ Miscellaneous ・・・・・・・・ ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 33~34 34 35 35~36 36 36 2 ㈱ゼネラルサイエンスコーポレーション 熱 分析 Enthalpy / Heat capacity 指差熱/エンタルピー/熱容量 Cat.No. LGC2601 SRM2232 LGC2603 LGC2604 LGC2605 LGC2606 LGC2607 LGC2608 LGC2609 LGC2610 SRM2234 SRM2235 LGC2611 LGC2612 LGC2613 NMIJ5806-a SRM2225 SRM705a SRM720 SRM781D2 品 名 容 量 Indium 0.5g Indium 1g Naphthalene 0.5g Benzil 0.5g Acetanilide 0.5g Benzoic acid 0.5g Diphenylacetic acid 0.5g Lead 0.5g Tin 0.5g Biphenyl 0.5g Gallium-DSC enthalpy 1.5g Bismuth-DSC enthalpy 1.5g Zinc 0.5g Aluminium 0.5g Phenyl salyciate 0.5g 単結晶シリコン 5Φx1mm Mercury-DSC enthalpy 2.5g Polystyrene 熱容量/分子量 5g 170,900 g/mol Mn : menbrance osmometry 179,300 g/mol Mw : light scattering Mw : sedimentation equilibrium 189,800 g/mol LV Synthetic Sapphire-Enthalpy and Heat Capacity 15g Molybdenum-Enthalpy and Heat Capacity each SRM1514 Thermal Analysis Purity Set シクロヘキサン Melting Temperature Enthalpy of Fusion 156.61℃ 3.296 KJ/mol 156.5985℃ 28.51 J/g 80.23℃ 18.923 KJ/mol 94.85℃ 23.26 KJ/mol 114.34℃ 21.793 KJ/mol 122.35℃ 17.98 KJ/mol 147.19℃ 31.16 KJ/mol 327.47℃ 4.765 KJ/mol 231.92℃ 7.187 KJ/mol 68.93℃ 18.60 KJ/mol 302.9146 ℃ 80.097 KJ/g 544.556 K 53.146 J/g 419.53℃ 7.103 KJ/mol 660.33℃ 10.827 KJ/mol 41.79℃ 19.18 KJ/mol 使用温度範囲 50~350 K 234.30℃ 11.469 KJ/mol LV in benzene(25℃) 74.3mL/g LV in benzene(35℃) 74.5mL/g in cyclohexane(35℃) 35.4mL/g Enthalpy and Heat Capacity 10~2250 K Enthalpy and Heat Capacity 273.15~2800K Set of 4 vials: 0.5 g each NMIJ CRM5401-a 1.5mL 186.18K 279.86K 80.2J/g 31.9J/g 固相間相移転温度 融点 固相間相移転エンタルピー 融解エンタルピー Freezing Point Cat.No. SRM1744 SRM1745 SRM1746 SRM1747 SRM1748 SRM740a SRM45d SRM49e 品 Aluminium Indium Silver Tin Zinc Zinc Copper Lead 名 容 量 200g 200g 300g 300g 1 cell 200g 450g 600g Freezing Point ℃ 660.323 156.5985 961.78 231.928 419.527 419.527 1084.8 327.453 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 3 ㈱ゼネラルサイエンスコーポレーション Flash Point Cat.No. 品 ERML-FC031a ERML-FC032a ERML-FC033a LGC2000 名 容 (mL) p-Xylene n-Nonane n-Decane Diethyl phthalate 量 100 100 100 500 Flash Point ℃ 27 32.5 50 159.0 Melting Point Cat.No. 品 ERM-FC030a ERM-FC029a ERM-FC028a NCS AS93102b ERM-FC027 ERM-FC026a ERM-FC025a ERM-FC024a NCS AS93104b ERM-FC023a NCS AS93105b ERM-FC022a NCS AS93106b NCS AS93107b ERM-FC21a LGC2410 NCS AS93108b SRM743 SRM742 SRM1751 SRM1969 SRM1970 SRM1971 SRM1968 SRM1972 名 Phenyl salicylate 4-Nitrotoluene Naphthalene Naphthalene Benzil Acetanilide Benzoic acid Diphenylacetic acid 1,6-Adipic acid Anisic acid Anisic acid 2-Chloroanthraquinone Anthracene p-Nitrobenzoic acid Carbazole Anthraquinone Anthraquinone Mercury Alunina Gallium Rubidium=Melting,Triple point Succinonitrile=Melting,Triple point Indium=Melting,Triple point Gallium=Melting,Triple point 1,3-Dioxolan-2-one(ethylene carbonate)=Melting,Triple point 容 量 0.25g 2g 0.5g 2g 0.25g 0.25g 0.25g 0.25g 2g 0.25g 2g 0.25g 2g 2g 0.5g 0.25g 2g 680g 10g 200g unit unit each 200g 60g Melting Point ℃ 41.82 51.66 80.34 80.08 94.90 114.19 122.36 147.26 151.62 183.50 183.28 209.73 215.88 239.58 245.41 284.48 284.55 -38.8344 2052 29.7646 39.30 58.0642 156.598 29.7646 36.3143 Combustion Calorimetry (powder form) / 燃焼熱量 These SRMs are for use as standards for calibration of combustion bomb calorimeters used in checking the performance of apparatus and analytical procedures and for the characterization of high purity compounds, fuels, and related fuel materials. Cat.No. SRMS39j SRM1656 SRM1657 SRM2151 SRM2152 SRM2683c SRM1656 SRM2682b SRM2684b SRM2685b SRM2692b 品 名 Benzoic acid Thianthrene Synthetic Refuse-Derived Fuel Nicotinic Acid Urea S & Hg in Coal S=1.955%, Hg=90.0μg/g Synthetic Refuse - Derived Fuel Sulfur Sulfur Sulfur Sulfur and and and and Mercury Mercury Mercury Mercury in in in in Coal, Coal, Coal, Coal, Sub-Bituminous: %S = 0.4917; mercury 108.8 g/Kg % Ash = Bituminous:% S = 3.06; Mercury = 97.4 µg/kg; % Ash = 11.0 Bituminous: % S = 4.730; Mercury 146.2 g/Kg % Ash = 15.94 Bituminous: % S = 1.170; Mercury 133.3 g/Kg % Ash = 7.94 容 量 (in g) 30 30 100 25 25 50 100 Heat of Combustion (in MJ/kg)* 26.434 33.480 13.87** 22.184 10.536 (30.24) 13.87 在庫切れ 在庫切れ 在庫切れ 在庫切れ *The calorific values (MJ/kg) may decrease upon the aging or normal oxidation of the coals. NIST will continue to monitor these calorific values and report any substantive change to the purchaser. **Gross calorific value or HHV (Higher Heating Value). ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 4 ㈱ゼネラルサイエンスコーポレーション Solution Calorimetry Cat.No. 容 量 (in g) 30 品 名 SRM1655 Potassium Chloride (Water Solution Calorimetry) Heat of Solution (in MJ/kg) Absorbed (0.235) Thermal Conductivity of Graphite and Iron (rod form) 熱伝導:黒鉛・鉄 品 Cat.No. 名 サイズ(cm) RM 8420 Electrolytic Iron NMIJ 等方性黒鉛 RM1401-a Pyrex glass (the function to calculateλfor BCR039C temperature between -75 and 195℃ is given in the CoA) IRMM440A Resin bonded fiber board IRMM440B Resin bonded fiber board IRMM440C Resin bonded fiber board IRMM440D Resin bonded fiber board Conductivity 77.9Wm -1k -1at 293 K 0.64D 5.0 形状1: 10Φ x 1.0mm 形状2: 10Φ x 2.0mm Thermal conductivity 30 x 30 x 50 at 23 ℃ 1.143 8 (W/mK) (± 1.7 %) 30 x 30 x 3.5 0.0293949+(0.0001060 50 x 50 x 3.5 ・T)+(2.047 x 10-7・T2) 60 x 60 x 3.5 W/mk 100 x 100 x 3.5 Temperature Range 2 to 1000(K) 300K-900K Density(kg/m3) 2222 - 2226 -10 and 50 ℃ ガラス・セラミクス GLASS-CERAMIC BCR724 Thermal Diffusivity, α Certified value 1) [m²/s ·10-6] α = 4.406 − 1.351.10 −2 ⋅T + 2.133 ⋅10 -5 ⋅T 2 - 1.541 ⋅10 -8 ⋅T 3 + 4.147 ⋅10 -12 T 4 Thermal Conductivity, λ Certified value 1) Uncertainty 2) [%] 6.1 Uncertainty 2) [%] 6.5 [W/(m·K)] λ = 2.332 + 515.1/ T Thermal Expansion of Metal, Glass (rod form) 熱膨張(金属・シリコン・ガラス) Cat.No. 品 名 SRM731L1 Borosilicate Glass - Thermal Expansion SRM731L2 Borosilicate Glass - Thermal Expansion SRM731L3 Borosilicate Glass - Thermal Expansion SRM738 Stainless Steel (AISI 446) NMIJ1101-a 単結晶シリコン NMIJ1102-a ガラス状炭素 NMIJ5803-a 単結晶シリコン 低温用 NMIJ1103-a 単結晶シリコン NMIJ1104-a ガラス状炭素 Temperature Range サイズ(cm) 80 to 680(K) 0.645.1 80 to 680(K) 0.6410.2 80 to 680(K) 0.6415.2 293 to 780(K) 0.64 5.1 293.154から1000K 4.5x4.5x60、 9x9x60(mm) 293.154から1100K 6x6x160、 6x6x20(mm) 形状1:10x10x30mm 使用温度範囲:20k-300k 形状1:10x10x60mm 20から300K 293.5K から 300K 10x10x30、 10x10x60(mm) 10 x 6 x 6 (mm) 熱拡散(黒鉛) 品 Cat.No. NMIJ5804-a 等方性黒鉛 名 サイズ(mm) Temperature Range 300から1500K φ10: 1.4, 2.0, 2.8, 4.0 薄膜の熱拡散時間 Cat.No. 品 名 仕 様 薄膜部分:9.5mmx9.5mmx680nm(窒化チタン) NMIJ RM1301-a 窒化チタン薄 基盤部分:10mmx10mmx0.52mm(合成石英ガラ 膜 参 考 値 139.7 x 10-9 s ス) ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 5 ㈱ゼネラルサイエンスコーポレーション 縦波音速 Cat.No. NMIJ 品 ノンドープ単結晶シリコン 名 Temperature Range 296から1273K サイズ(mm) 10 x 19 x 18 Thermal Resistance of Glass, Silica, and Polystyrene (solid forms) 熱抵抗(ガラス・シリカ・ポリスチレン) Cat.No. SRM1449 SRM1450d SRM1452 SRM1453 SRM1459 品 名 Fumed Silica Board Fibrous Glass Board サイズ(cm) 60 61 60 66 30 Fibrous Glass blanket for high precison Expanded Polystyrene Board Fumed Silica Board 60 61 60 93 30 Thermal Resistance 1.2 Temperature Range 2.54 2.54 2.54 1.34 2.54 297.1 280 to 340 285 to 310 297.1 0.4 1.2 Glass Liquidus Temperature (solid form) This SRM is for checking test methods and for calibrating equipment used to determine the liquidus temperature of glass by the gradient furnace methods per ASTM C 829. SRM SRM773 品 名 Soda-Lime-Silica SRM1416 Aluminosilicate 容 量 2.5 2.5 0.6 (cm) Temperature (℃) Method A (boat) 988 B (perforated plate) 991 22 lengths of 12.7 cm tube (250 g) 1147 Thermocouple Materials For further information see SP 260-56, SP 260-134 and SP 260-139 Cat.No. 品 名 容 量 SRM1967 Platinum Wire, High Purity (99.999 + %) 0.051D x 100 cm SRM1749 Gold vs. Platinum Thermocouple Thermometer 1 each SRM1750 Standard Platinum Resistance Thermometer 1 each Temperature Range(℃) -197 to 1767 0 to 1000 13.8033 to 429.7485 K ELECTRICAL PROPERTIES 電気特性 Electrical Resistivity and Conductivity of Silicon (block and wafer forms) SRMs 2526 and 2527 are sets of 16 silicon chips, each mounted on beveling blocks, intended to provide a number of resistivity scale reference points for calibrating spreading resistance measurements for the semiconductor industry. SRM 2526 is (111) p-type, SRM 2527 is (111) n-type. SRMs 2541 through 2547 consist of single wafers intended for use as reference standards for sheet resistance and resistivity measurements utilizing the four-point probe method. SRMs 2541, 2542, and 2543 are made of Czochralski-grown, boron-doped silicon with (100) crystallographic orientation; SRMs 2544, 2545, 2546, and 2547 are float zone (111) orientation and phosphorus-doped by the neutron transmutation doping process. Cat.No. SRM2541 SRM2543 RM 8420 品 名 Silicon Resistivity Silicon Resistivity Electrolytic Iron Resistivity (Ω · cm) 0.01 1 0.004 to 0.909 容 量 (mm) 100D 0.625 100D 0.625 0.64D 5.0 Electrical Properties of Glass (bar form) SRM 624 is for checking test methods and for calibrating equipment used to determine the dc volume resistivity of glass per ASTM C 657. SRM 774 is for checking methods used to determine dielectric constant and ac loss characteristics of insulating materials per ASTM D 150. Cat.No. 品 名 SRM624 Lead-silicon - dc Resistivity SRM774 Lead-Silica, for dielectric Value log10p 11.07Ω・cm at 250° C log10p 9.9Ω・cm at 300° C log10p 8.88Ω・cm at 350° C K ~ 7.47 at 100 Hz 容量(cm) 200g 5 5 2.5 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 6 ㈱ゼネラルサイエンスコーポレーション Electrophoretic mobility Cat.No. 品 名 SRM1980 Certificate Value 2.53 μm cm/V s Goethite(alpha-FeOOH) Optoelectronics (solid forms) 電気光学 Cat.No. Certified Property 品 名 SRM2514 Wavelength Calibration Reference for 1560 nm to 1595 nm(Carbon Monoxide 12C16O) Wavelength Calibration Reference for 1595 nm to 1630 nm(Carbon Monoxide 13C16O) Wavelength Reference Absorption Cell (Acetylene) Polarization Mode Dispersion Standard Wavelength Reference Absorption Cell (Hydrogen Cyanide) Optical Fiber Diameter Standard Pin Gauge Standard for Optical Fiber Ferrules Optical Fiber Ferrule Geometry Standard Polarization-Mode Dispersion SRM2515 SRM2517a SRM2518 SRM2519a SRM2520 SRM2522 SRM2523 SRM2538 RM8130 41 lines in 3n band, in nm 41 lines in 3n band, in nm 1 + 3 band, in nm Wavelength-averaged DGD 3 band, in nm 125 m D, nominal 126 m D, nominal 2.5 mm D, nominal Wavelength-averaged DGD Multiline coplanar waveguide 12 verficationdevices Coplanar Waveguide 粘 度 分析 Viscosity of Glass (bar form) SRMs 710a, 711a, and 717a are for checking the performance of high temperature viscosity equipment (rotating cylinders) and low temperature viscosity equipment (fiber elongation, beam bending, parallel plates, etc.). Cat.No. 品 名 SRM710a SRM717a Soda-Lime-Silica Borosilicate Temperature ( oC) at Log 10 Viscosity (Pa 1 2 3 4 5 1464 1205 1037 918 1555.4 1256.5 1065.1 932.1 834 s) 6 758 Viscosity Fixpoints (solid forms) Cat.No. 品 名 SRM709 SRM714 SRM717a Extra Dense Lead Silica Alkaline Earth Alumina Silicate Borosilicate Softening Annealing Point Point (°C) (°C) 384 328 719 513 Strain Point (°C) 311 470 容 量 4 cm 4 cm 5 cm 在庫切れ 4.2 cm 4.2 cm 12.5 cm Values in parentheses are not certified and are given for information only. ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 7 ㈱ゼネラルサイエンスコーポレーション Viscosity oil standards Cat.No. 品 名 PSL2700V01 N4-Viscosity oil standard PSL2700V02 N8-Viscosity oil standard PSL2700V03 N1.0-Viscosity oil standard PSL2700V04 S3-Viscosity oil standard PSL2700V05 S6-Viscosity oil standard PSL2700V06 N10-Viscosity oil standard PSL2700V07 S20-Viscosity oil standard PSL2700V08 N35-Viscosity oil standard PSL2700V09 S60-Viscosity oil standard PSL2700V10 N100-Viscosity oil standard PSL2700V11 S200-Viscosity oil standard PSL2700V12 N350-Viscosity oil standard Kinematic viscosity(noemal) Dynamic viscosity(noemal) 0.47mm2/s,cSt(20℃) 0.45mm2/s,cSt(25℃) 0.40mm2/s,cSt(40℃) 0.95mm2/s,cSt(20℃) 0.89mm2/s,cSt(25℃) 0.75mm2/s,cSt(40℃) 1.3mm2/s,cSt(20℃) 1.2mm2/s,cSt(25℃) 0.97mm2/s,cSt(40℃) 0.91mm2/s,cSt(50℃) 4.6mm2/s,cSt(20℃) 4mm2/s,cSt(25℃) 2.9mm2/s,cSt(40℃) 2.4mm2/s,cSt(50℃) 1.2mm2/s,cSt(100℃) 11mm2/s,cSt(20℃) 8.9mm2/s,cSt(25℃) 5.7mm2/s,cSt(40℃) 4.4mm2/s,cSt(50℃) 1.8mm2/s,cSt(100℃) 21mm2/s,cSt(20℃) 17mm2/s,cSt(25℃) 10mm2/s,cSt(40℃) 7.3mm2/s,cSt(50℃) 2.7mm2/s,cSt(100℃) 4.4mm2/s,cSt(20℃) 34mm2/s,cSt(25℃) 18mm2/s,cSt(40℃) 13mm2/s,cSt(50℃) 3.8mm2/s,cSt(100℃) 87mm2/s,cSt(20℃) 66mm2/s,cSt(25℃) 32mm2/s,cSt(40℃) 21mm2/s,cSt(50℃) 5.3mm2/s,cSt(100℃) 170mm2/s,cSt(20℃) 120mm2/s,cSt(25℃) 54mm2/s,cSt(40℃) 35mm2/s,cSt(50℃) 7.3mm2/s,cSt(100℃) 330mm2/s,cSt(20℃) 230mm2/s,cSt(25℃) 97mm2/s,cSt(40℃) 60mm2/s,cSt(50℃) 11mm2/s,cSt(100℃) 660mm2/s,cSt(20℃) 460mm2/s,cSt(25℃) 180mm2/s,cSt(40℃) 105mm2/s,cSt(50℃) 16mm2/s,cSt(100℃) 1300mm2/s,cSt(20℃) 850mm2/s,cSt(25℃) 310mm2/s,cSt(40℃) 170mm2/s,cSt(50℃) 23mm2/s,cSt(100℃) 0.31mPa.scP(20℃) 0.29mPa.scP(25℃) 0.26mPa.scP(40℃) 0.73mPa.scP(20℃) 0.68mPa.scP(25℃) 0.56mPa.scP(40℃) 1.0mPa.scP(20℃) 0.93mPa.scP(25℃) 0.76mPa.scP(40℃) 0.71mPa.scP(50℃) 3.9mPa.scP(20℃) 3.3mPa.scP(25℃) 2.4mPa.scP(40℃) 1.9mPa.scP(50℃) 0.9mPa.scP(100℃) 9.1mPa.scP(20℃) 7.6mPa.scP(25℃) 4.8mPa.scP(40℃) 3.7mPa.scP(50℃) 1.4mPa.scP(100℃) 18mPa.scP(20℃) 15mPa.scP(25℃) 8.8mPa.scP(40℃) 6.2mPa.scP(50℃) 2.2mPa.scP(100℃) 39mPa.scP(20℃) 31mPa.scP(25℃) 16mPa.scP(40℃) 11mPa.scP(50℃) 3.2mPa.scP(100℃) 76mPa.scP(20℃) 57mPa.scP(25℃) 27mPa.scP(40℃) 16mPa.scP(50℃) 4.3mPa.scP(100℃) 76mPa.scP(20℃) 57mPa.scP(25℃) 27mPa.scP(40℃) 18mPa.scP(50℃) 4.3mPa.scP(100℃) 290mPa.scP(20℃) 210mPa.scP(25℃) 84mPa.scP(40℃) 50mPa.scP(50℃) 9mPa.scP(100℃) 580mPa.scP(20℃) 400mPa.scP(25℃) 150mPa.scP(40℃) 90mPa.scP(50℃) 13mPa.scP(100℃) 1100mPa.scP(20℃) 750mPa.scP(25℃) 270mPa.scP(40℃) 150mPa.scP(50℃) 19mPa.scP(100℃) ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 容量 500mL 500mL 500mL 500mL 500mL 500mL 500mL 500mL 500mL 500mL 500mL 500mL 8 ㈱ゼネラルサイエンスコーポレーション PSL2700V13 PSL2700V14 PSL2700V15 PSL2700V16 PSL2700V17 PSL2700V18 PSL2700V19 2400mm2/s,cSt(20℃) 1600mm2/s,cSt(25℃) 520mm2/s,cSt(40℃) S600-Viscosity oil standard 280mm2/s,cSt(50℃) 33mm2/s,cSt(100℃) 3400mm2/s,cSt(20℃) 2400mm2/s,cSt(25℃) 940mm2/s,cSt(40℃) N1000-Viscosity oil standard 550mm2/s,cSt(50℃) 350mm2/s,cSt(100℃) 80mm2/s,cSt(100℃) 9600mm2/s,cSt(20℃) 5900mm2/s,cSt(25℃) 1700mm2/s,cSt(40℃) S2000-Viscosity oil standard 890mm2/s,cSt(50℃) 69mm2/s,cSt(100℃) 20000mm2/s,cSt(20℃) 12000mm2/s,cSt(25℃) 3400mm2/s,cSt(40℃) N1002-Viscosity oil standard 1600mm2/s,cSt(50℃) 280mm2/s,cSt(100℃) 120mm2/s,cSt(100℃) 41000mm2/s,cSt(20℃) 25000mm2/s,cSt(25℃) 6700mm2/s,cSt(40℃) S8000-Viscosity oil standard 3200mm2/s,cSt(50℃) 240mm2/s,cSt(100℃) 77000mm2/s,cSt(20℃) 47000mm2/s,cSt(25℃) 13000mm2/s,cSt(40℃) N15000-Viscosity oil standard 6100mm2/s,cSt(50℃) 3000mm2/s,cSt(100℃) 360mm2/s,cSt(100℃) 89000mm2/s,cSt(20℃) 23000mm2/s,cSt(25℃) S3000-Viscosity oil standard 11000mm2/s,cSt(40℃) 630mm2/s,cSt(50℃) 2100mPa.scP(20℃) 1400mPa.scP(25℃) 450mPa.scP(40℃) 240mPa.scP(50℃) 28mPa.scP(100℃) 2900mPa.scP(20℃) 2000mPa.scP(25℃) 800mPa.scP(40℃) 460mPa.scP(50℃) 280mPa.scP(100℃) 65mPa.scP(100℃) 7600mPa.scP(20℃) 4900mPa.scP(25℃) 1500mPa.scP(40℃) 770mPa.scP(50℃) 62mPa.scP(100℃) 17000mPa.scP(20℃) 11000mPa.scP(25℃) 2900mPa.scP(40℃) 1400mPa.scP(50℃) 238mPa.scP(100℃) 100mPa.scP(100℃) 33000mPa.scP(20℃) 20000mPa.scP(25℃) 5900mPa.scP(40℃) 2800mPa.scP(50℃) 200mPa.scP(100℃) 68000mPa.scP(20℃) 41000mPa.scP(25℃) 11000mPa.scP(40℃) 5400mPa.scP(50℃) 2600mPa.scP(100℃) 300mPa.scP(100℃) 80000mPa.scP(20℃) 21000mPa.scP(25℃) 9500mPa.scP(40℃) 540mPa.scP(50℃) ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 500mL 500mL 500mL 500mL 500mL 500mL 500mL 9 ㈱ゼネラルサイエンスコーポレーション DENSITY/密度 Density (liquid form) Cat.No. 品 名 Density(kg/cm3) 容 量 Toluene SRM211d SRM2214 HDF01 HDF02 HDF04 HDF05 HDF06 HDF07 HDF08 HDF09 HDF10 HDF11 HDF13 HDF12 GUM1.1 GUM1.2 GUM1.3 GUM1.4 GUM1.5 GUM1.6 GUM1.7 GUM1.8 GUM1.10 GUM1.11 871.476(15℃) 866.828(20℃) 862.170(25℃) Isooctone(2,2,4-Trimethylpentane) 695.969(15℃) 691.872(20℃) 687.753(25℃) 2,2,4-Trimethylpentane Liquid density (20℃) 692 Dodecane Liquid density (20℃) 750 Base lubricating oil approx.8mPa.s at 40℃ Liquid density (20℃) 867 Base lubricating oil approx.30mPa.s at 41℃ Liquid density (20℃) 871 Base lubricating oil approx.110mPa.s at 42℃ Liquid density (20℃) 881 Base lubricating oil approx.160mPa.s at 43℃ Liquid density (20℃) 887 Ethanol in water approx.41% ABV Liquid density (20℃) 947 Ethanol in water approx.11% ABV Liquid density (20℃) 984 Ethanol in water approx.10% by weight Liquid density (20℃) 1036 Ethanol in water approx.17% at 20℃ Liquid density (20℃) 1191 Sodium bromide in water Liquid density (20℃) 1206 Tetrachloroethylene Liquid density (20℃) 1623 n-Hexane Density (20℃) 659 n-Heptane Density (20℃) 683 2,2,4-Trimethylpentane Density (20℃) 691 n-Nonane Density (20℃) 717 n-Octane Density (20℃) 702 Methylcyclohexane Density (20℃) 769 Cycrohexane Density (20℃) 778 Toluene Density (20℃) 866 2,4-Dichlorotoluene Density (20℃) 1249 Tetrachloroethylene Density (20℃) 1623 4 x 5mL 4 x 5mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL Particule Size / 微 粒 子 ポリマー系 Cat No. SRM1963a SRM1691 SRM1690 CRM 165 CRM 166 CRM 167 品 名 SRM1965 Polystyrene SRM1961 Polystyrene (0.5% in H2O) Polystyrene (0.5% in H2O) Polystyrene (0.5% in H2O) Polystyrene (0.5% in H2O) Latex spheres, nominal 2μ Latex spheres, nominal 4.8μ Latex spheres, nominal 9.6μ 保証幅 (μm) 101.8(nm) 0.269 0.895 2.223 ± 0.013 4.821 ± 0.019 9.475 ± 0.018 容 量 5ml vial 5ml vial 5ml vial 2mL 2mL 2mL 9.94 (hexagonal array) 9.89 (unordered lusters) 1 slide 29.64 5ml vial ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp suspension suspension suspension 10 ㈱ゼネラルサイエンスコーポレーション 鉱物系 Cat No. 品 名 SRM659 CRM 066 SRM1978 CRM 070 CRM 067 SRM1984 SRM1982 CRM 069 SRM1985 CRM 130 CRM 068 CRM 131 CRM 132 Silocon Nitride Quartz Stokes' diameter Zirconium Oxide Quartz Stokes' diameter Quartz Stokes' diameter Tungsten Carbide/Cobalt Zirconium Oxide Quartz Stokes' diameter Tungsten Carbide/Cobalt Quartz Volume diameter Quartz Volume diameter Quartz Volume diameter Quartz Volume diameter 保証幅 (μm) 容 量 0.2 - 10 0.35-3.50 0.33 2.19 1.2-20 2.4-32 9-30 10 - 150 14-90 18 - 55 50-220 160-630 480-1800 1400-5000 5vialsx2.5g 10g 5g 10g 10g 14 g 10 g 10g 14 g 50g 100g 200g 700g powder powder powder powder powder sand powder gravel ガラス系 Cat No. SRM1021 SRM1003c SRM1004b SRM1017b SRM1018b SRM1019b 品 Glass Glass Glass Glass Glass Glass SRM8010 Sand 名 Beads Beads Beads Beads Beads Beads Particle Count Materials 品 名 Cat.No. SRM2806a Medium Test Dust in Hydraulic Fluid SRM8631a Medium Test Dust (MTD) RM8632 Ultrafine Test Dust 保証幅 (μm) 2-13 10-60 (600-325mesh) 53-125(325-100mesh) 100-400(140-45mesh) 220-750 (60-25mesh) 750-1450(20-10mesh) A(30-100 mesh) B(70-750 mesh) C(100-325 mesh) 規 格 在庫切れ 4μm to 40μm 1μm to 50μm 容 量 4g 25 g 43 g 70 g 87 g 200 g 3x150 g 容量 20 g 20g Particule/Biomaterials Gold Nanoparticles, Nominal 10 nm Diameter (2 x 5 mL ampoules) Properties: RM8011 - Reference Values for Particle Size - Information Values for Chemical and Electrochemical Properties Gold Nanoparticles, Nominal 30 nm Diameter (2 x 5 mL ampoules) Properties: RM8012 - Reference Values for Particle Size - Information Values for Chemical and Electrochemical Properties Gold Nanoparticles, Nominal 60 nm Diameter (2 x 5 mL ampoules) Properties: RM8013 - Reference Values for Particle Size - Information Values for Chemical and Electrochemical Properties ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 11 ㈱ゼネラルサイエンスコーポレーション ERM-FD 304 COLLOIDAL SILICA 10mL Equivalent sphere hydrodynamic particle diameter Certififed value [nm] Uncertainty [nm] 42.1 0.6 33 3.0 (27.8) (1.5) Scattering intensity-weighted harmonic mean diameter (DLS) Extinction intensity-based modal Stokes (CLS) Number-based modal diameter (TEM/SEM) ERM-FD 100 Colloidal Silica in water 9mL Equivalent spherical diameter Certififed value [nm] Uncertainty [nm] Intensity-weighted harmonic mean diameter (DLS) Intensity-based modal Stokes diameter (CLS) Number-based modal diameter (TEM/SEM) 19 0.6 20.1 1.3 19.4 1.3 Intensity-weighted mean diameter (SAXS) 21.8 0.7 (20.4) (1.6) (- 43.0 mV) (22 mV) Equivalent spherical diametr, volumeweighted mean (SAXS) Zeta Potential Surface Area / 比表面積標準物質 Cat. No. CRM 169 BAMPM-101 CRM 175 CRM 170 CRM 172 SRM1900 CRM 171 BAMPM-102 CRM 173 SRM1918 SRM2206 SRM2207 SRM1898 材 質 α-alumina SiO2 Tungsten α-alumina Quartz Silicon Nitride alumina α-Alumna Titanium dioxide Silica-alumina Controlled Pore Glass300nm Controlled Pore Glass18nm Titanium Dioxide Specific Surface Area(㎡・g-1) (BET) 0.104 ± 0.012 0.177 ± 0.004 0.181±0.031 1.05 ± 0.05 2.56 ± 0.10 Multi Poin t: 2.85 Single Point : 2.79 2.954 ± 0.13 5.41 ± 0.04 8.23 ± 0.21 Mean Pore Diameter 8.847nm Median Pore Diameter 8.503nm Total Intruded Volume 0.547nm3/g 12g S P: 10.73(㎡・g) S P: 1774.2(㎡・g) Single Point : 53.85 79.8 ± 0.4 5g 5g 15g Specific pore volume 0.210 cm3/g Mean pore radius 5.31nm 10g 5g BAMPM-103 Controlled Pore Glass 300nm Multi Point : 10.99 Single Point : 10.73 156.0 ± 1.3 3 Al2O3 type60 Specific pore volume 0.250 cm /g SRM 2207 Controlled Pore Glass 18nm BAMPM-104 SRM 2206 Al2O3 type150 M P: 10.99(㎡・g) M P: 177.8(㎡・g) Multi Poin t: 55.55 容 量 60g 10g 200g 60g 10g 4g 50g 10g 46g 10g Mean pore radius 3.18 Multi Point : 177.8 Single Point : 174.2 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 5g 12 ㈱ゼネラルサイエンスコーポレーション specific surface area (㎡/g) 3 specific pore volume (m /g) ERM-FD107 p/po=0.99 Faujasite type mean pore radius(nm) zeolite Φ1.8mm Most frequent poreradius(nm) Specific micropore volume(cm3/g) Median pore width(nm) Pore volume (in m3/g)at 50MPa Pore volume (in m3/g)at 100MPa Pore volume (in m3/g)at 195MPa ERM-FD120 Alpha-Al2O3 Pore volume (in m3/g)at 200MPa Φ900μm Pore volume (in m3/g)at 395MPa Mean pore diameter d50 (nm) Most frequent pore diameter dp,m(nm) ERM-FD121 Porous glass Φ55μm Pore volume (in m3/g)at 100MPa Pore volume (in m3/g)at 195MPa Pore volume (in m3/g)at 200MPa Pore volume (in m3/g)at 395MPa Mean pore diameter d50 (nm) Most frequent pore diameter dp,m(nm) ERM-FD122 Porous glass Φ90μm Pore volume (in m3/g)at 100MPa Pore volume (in m3/g)at 195MPa Pore volume (in m3/g)at 200MPa Pore volume (in m3/g)at 395MPa Mean pore diameter d50 (nm) Most frequent pore diameter dp,m(nm) 10g / pellets 0.217 ± 0.005 0.86 ± 0.03 545.0 ± 12.2 546.7 ± 12.7 546.8 ± 12.7 548.1 ± 13.1 228.0 ± 5.9 232.2 ± 8.8 621.8 ± 12.9 621.9 ± 12.9 621.9 ± 12.9 624.6 ± 13.4 15.1 ± 0.2 15.3 ± 0.2 919.7 ± 16.8 922.5 ± 17.5 922.6 ± 17.5 924.4 ± 17.2 139.0 ± 3.7 140.2 ± 3.9 69.4 ± 8.0 625.4 ± 13.6 Pore volume (in m3/g)at 50MPa Pore volume (in m3/g)at 100MPa BAM-P127/ SRM1917 Alumina 1φ Sorptive: Nitrogen 3 Pore volume (in m /g)at 195MPa Pore volume (in m3/g)at 200MPa 637.1 ± 14.4 - Pore volume (in m3/g)at 395MPa Mean pore diameter d50 (nm) 638.6 ± 21.6 15g/Beads 12g/Beads 10g/Beads 10g Beads 24.2 ± 1.0 23.9 ± 2.8 Most frequent pore diameter dp,m(nm) Pressure volume curve (mercury intrusion curve) ERM-FD123 10nm x 20nm (6 filter tubes) Pressure range between 0.28 and 1.41 Mpa Certified 0.9 0.95 0.99 Quantity values α confidence-interval confidence-interval confidence-interval m y1 Vp,1.41MP 99.52 ± 2.88 unit 4.54 mm3g-1 3.44 Specific pore volume at 1.41MPa y2 y3 p50 d50 0.4966 0.2151 0.4829 3.0520 ± 0.0151 ± 0.0131 ± 0.0200 ± 0.1285 0.0180 0.0156 0.0239 0.2021 0.0238 0.0206 0.0315 0.02021 Mpa MPa Mpa μm ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 13 ㈱ゼネラルサイエンスコーポレーション ERM-FD124 Pressure range between 0.24 and 1.55 Mpa Quantity Certified values αm y1 158.1 0.95predicition-interval 148.4 – 167.8 mm3g-1 unit Vp,1.55MPa Specific pore volume at 1.55MPa y2 0.5021 0.474 – 0.530 MPa y3 p50 0.2616 0.223 – 0.300 0.4795 3.074 0.451- 0.508 2.89- 3.26 MPa MPa d50 μm ERM-FD125 Pressure range between 0.12 and 0.88 Mpa Certified 0.9 0.95 0.99 Quantity values α confidence-interval confidence-interval confidence-interval m y1 Vp,0.88MP 207.9 199.5 -216.3 197.8 -218.0 unit mm3g-1 194.6 -221.2 Specific pore volume at 0.88MPa y2 y3 p50 d50 0.2646 0.1366 0.2554 5.796 0.2533 0.1216 0.2476 5.616 - 0.2760 0.1516 0.2633 5.977 0.2511 0.1187 0.2460 5.581 - 0.2782 0.1546 0.2649 6.012 0.2467 0.1130 0.2430 5.512 - 0.2825 0.1603 0.2679 6.081 Mpa MPa Mpa μm ERM-FD126 Pressure range between 0.55 and 2.1 Mpa Quantity 110.9 0.95predicition-interval 102.4 -119.4 0.8682 0.2965 0.8441 1.746 0.8274 0.2660 0.8025 1.661 Certified values αm y1 unit mm3g-1 Vp,2.1MPa Specific pore volume at 2.1MPa y2 y3 p50 d50 Micropore volume and width 品 名 Cat.No. BCR704 (10g) BCR705 (10g) Faujasite type zeolite Linde type A zeolite - 0.9091 0.3271 0.8856 1.832 MPa MPa MPa μm Micropore volume (cm3/g1) 0.205 0.181 Median micropore width(nm) 0.668 0.592 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 14 ㈱ゼネラルサイエンスコーポレーション SURFACE FINISH Surface Roughness (block form) These SRMs are for calibrating stylus instruments that measure surface roughness. These electroless-nickel coated steel block have a sinusoidal roughness profile machined on the top surface. Roughness, Ra Wavelength, D 容量 Cat. No. Type (mm) (mm) (cm) SRM2071b SRM2072 SRM2073a SRM2074 SRM2075 Sinusoidal Sinusoidal Sinusoidal Sinusoidal Sinusoidal Roughness Roughness Roughness Roughness Roughness 3.0 1.0 1.0 100 40 800 在庫切れ 在庫切れ block: 2.4 3.3 block: 2.4 3.3 block: 2.4 3.3 Abrasive wear Cat.No. SRM1857 品 名 D-2 Tool steel ASTM G65 abrasion test 容量 2 blocks Surface tension Cat No. GUM 11.1 GUM 11.2 GUM 11.3 品 名 Isooctone Benzene Glycerol Surface tension 容量 18 mN/m at 20℃ 28 mN/m at 20℃ 62 mN/m at 20℃ 30mL 30mL 30mL METROGY / 度量衡 Optical Microscope Cat.No. SRM 2059 SRM 2059 SRM2800 Linewidth Measuremnet 品 名 Photomask Linewidth Calibration Standard Photomask Linewidth Calibration Standard Microscope Magnification Standard Pich(μm) サイズ 在庫切れ 在庫切れ 在庫切れ Spacings サイズ 2 x 2 mm 在庫切れ Scanning electron microscope Cat.No. SRM8091 SRM2800 品 名 SEM Sharpness Standard Microscope Magnification Standard ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 15 ㈱ゼネラルサイエンスコーポレーション Depth Profiling (wafer form) SRMs 2133, 2134 and 2137 are for calibrating the secondary ion response to minor and trace element levels in a silicon matrix. SRM 2133 is certified for phosphorus;SRM 2134 is certified for arsenic; SRM 2137 is certified for boron. SRM 2135c is for calibrating equipment used to measure sputtered depth and erosion rates in surface analysis. SRM 2135c is certified for total chromium and total nickel thickness, for individual layer uniformity, for nickel/chromium bilayer uniformity, and for individual layer thickness. Cat. No. SRM2133 品 名 Value 容量/形状(cm) 31 2 Phosphorus Implant in Si Depth P: 0.04927 g/cm Profile (9.58 x 1014 atoms/cm2) Arsenic Implant in Silicon SRM2134 Profile Standard As: 0.09120 g/cm2 (7.330 x 1014 atoms/cm2) 1 cm x 1 cm crystal 75 Cr: 41.3 g/cm2 Ni: 49.4 µg/cm2 SRM2135c Nickel-Chromium Thin-Film Depth Profile Standard SRM2137 10 2 Boron Implant in Silicon Depth B: 0.01692 g/cm 15 Profile Standard (1.018 ´ 10 atoms/cm2) 1 cm x 1 cm crystal 1 2.54 0.04 11 Coating Thickness Cat. 品名 SRM1358b SRM1359b steel SRM1361b steel SRM1362b steel SRM1363b steel SRM1364b steel Copper Copper Copper Copper Copper Copper and and and and and and chromium chromium chromium chromium chromium chromium on on on on on on Coating Thickness, nominal(mils) 0.8, 3.1, 9.8, 39 2.0, 5.5, 20, 32 0.2, 0.5, 1.0, 2.0 1.6, 3.1, 5.5, 7.9 9.8, 16, 20, 26 32, 39, 59, 79 (m) 20, 80, 255, 1000 48, 140, 505, 800 6, 12, 25, 48 40, 80, 140, 205 255, 385, 505, 635 800, 1000, 1525, 1935 形 状 (mm) 45 45 45 45 45 45 x x x x x x 45 45 45 45 45 45 Material for thin film and surface technology Layer BAM-L100 BAM-L101 BAM-L102 BAM-L103 BAM-L104 BAM-L105 Material Nominal layer thickness Ti/Al TiO2/SiO2 multilayer TiN single layer VN single layer TiC single layer VC single layer 5 x (100/250)nm 6 x (100/100)nm 2500nm 2500nm 2500nm 2500nm Certified quantitiy Substrate Substrate dimensions Material total layer thickness 100Cr6 steel φ30 x 5 total layer thickness BK7 glass 30 x 30 x 1 100Cr6 steel φ30 x 5 layer thickness 100Cr6 steel φ30 x 5 layer thickness 100Cr6 steel φ30 x 5 layer thickness 100Cr6 steel φ30 x 5 layer thickness Superconducting Critical Current (wire form) This SRM is for checking the performance of measurement systems used in superconductor technology. It consists of 2.2 m of a multifilamentary niobium titanium, copper-stabilized superconducting wire wound in a single layer onto a spool with a core diameter of 8.7 cm. Cat.No. 品 名 SRM1457 Niobium-Titanium Wire Magnetic Field(T) 2 4 6 8.000 Critical Current(A) 293.3 187.38 124.72 69.72 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 16 ㈱ゼネラルサイエンスコーポレーション Cat.No. 品 名 サイズ SRM2800 Microscope Magnification Standard SRM5000 Overlay Wafer Standard SRM5001 Two-Dimensional Grid Photomask Standard 在庫切れ 17.6 mm 16.0 mm 15.2 cm 15.2 cm 0.64 cm X-線 分析 X線回折 Cat.No. 640d 656 660b 674b 675 1878a 1879a 品 名 XRD Application 容量 Line Position and 7.5 g Line Shape Quantitative Silicon Nitride 10g x 2 Analysis Line Position and Lanthanum Hexaboride Powder 6g Line Shape X-Ray Powder Diffraction Quantitative Analysis set of 5 CeO2 (fluorite structure) 10g Cr2O3 (corundum structure) 10g TiO2 (rutile) 10g ZnO (wurtzite structure) 10g Line Position - Low 2q Mica 7.5g Respirable Quartz Quantitative Analysis Respirable Cristobalite Quantitative Analysis 5g Lattice Parameters(in nm) Parameters 0.543 123 Silicon Powder a-(0.7752630 / 0.5619372) b-(0.7602293 / 0.2906827) 0.415 689 (0.5411102) (0.4958979 / 1.359592) (0.4593927 / 0.2958875) (0.3249897 / 0.520653) 0.998104 在庫切れ 25.6mmΦ 1976b Alumina Plate, Sintered Instrument Response x 2.2mm 0.4758846 / 1.299306 thicness 1990 Ruby Sphere Single Crystal Diffractometer 3 spheres a: 0.476080 nm c: 1.299568 nm Values in parentheses are not certified but are provided as reference values or are given for information only. X-Ray and Photography (chart and step tablet forms) Cat.No. 品 名 SRM1010a Microcopy Resolution Test Chart SRM5001 Two -Dimensional Grid Photomask Standard 容 量 Set of 5 charts Solder Thickness for X-Ray Fluorescense Cat.No. 品名 SRM2321 Tin -lead alloy on copper 構成比 Coating Mass/Area 60%Sn, 40%Pb 6.8mg/cm2 Cating Thickness μm μm 295 7.5 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 17 ㈱ゼネラルサイエンスコーポレーション 元 素 元 素 Li (LiF) Na (NaCl)* Mg Al Si (SiO) P (GaP)** S (CuSx) Cl (NaCl, KCl)* K (KCl, KI) Ca (CaF2) Sc (ScF3) Ti V Cr Mn Fe Co Ni Cu Zn (ZnTe)** Ga (GaP)** Ge As (GaAs) Se Br (CsBr) Rb (RbI) Sr (SrF2) Y (YF3) Nb (NbO3) Mo (MoO3) Rh Pd Ag Cd (CdSe)** In Sn Sb Te I (RbI, KI)* Cs (CsBr)* Ba (BaF2) La (LaF3) Ce (CeF3) Pr (PrF3) Nd (NdF3) Sm (SmF3) Eu (EuF3) Gd (GdF3) Tb (TbF3) Dy (DyF3) Ho (HoF3) Er (ErF3) Tm (TmF3) Yb (YbF3) Lu (LuF3) W (WO3) Pt Au Ag-Hg amalgam*** Tl (TlCl) Pb Bi * dual element standards, beware duplication ** variable stoichiometory(thickness certified for TOTAL of both elements) *** Hg thicness certified to +/- 10% ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 18 ㈱ゼネラルサイエンスコーポレーション 基台は丸型です。 お選び頂いた元素に、基台と元素を蒸着させるフイルム及び位置をお決め下さい。 外径 25mm 32mm 36mm 47mm* 内径 19mm 25mm 29mm 39mm この組合せの中からお選び下さい。 * 47mmの場合は元素の金額より10%加算されます。 材質 : アクリルリング 厚さ : 約 1.5mm a, b いづれかのBacking をお選び下さい。 a : 2.5μ, 3.5μ, 6.3μ Mylar Polyester film (6.3μ = 約 1mg/c㎡ thick)よりお選び下さい。 * 2.5μの場合は元素の金額より10%加算されます。 b : Nuclepore Polycarbonate Aerosol Membranes (0.4μpore size 約1mg/c㎡ thick) 基台とフイルムの位置について「オプションA」か「オプションB」のいずれかをお選び下さい。 OPTION "A" OPTION "B" Backing Deposit Backing Mounting ring Deposit 公称値 : 50μg/c㎡ (誤差は約±20% 以内) (Thicker and deposits may be available but must be individually quoted. Standarda are fabricated to ±20% of the soecified thicness with the actual thickness determined to ±5% where possible.) 下記のようなSpec date が添付されます。 例)元素を Aluminium、 基台を外形36mm・内径を29mm、フィルムをマイラー6.3μ、位置をオプションBにした場合 XRF Calibration Standard Certification STANDARD Aluminium as Al metal SERIAL NUMBER 14515 AREAL DENSITY ELEMENT 1 39.1 μg/c㎡ +/- 5% as Al ELEMENT 2 BACKING MATERIAL 6.3μm Mylar MOUNT 36mm O.D. , 29mm I.D. Acrylic ring OTHER INFORMATION Deposit sides face away from ring (Option "B") ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 19 ㈱ゼネラルサイエンスコーポレーション 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Na Mg Al Si,Ca Ga, P Fe, S K Ti V Cr Mn Fe Co Ni Cu Zn Ge Sb Zr Nb Mo Ag Ba Ta W Standard Material (* Natural Material) Albite, NaAlSi * Periclase, MgO Corundum, Al2O3 Wollastonite, * CaSiO Gallium Phosphide, GaP Pyrite, FeS* Orthoclase, KAlSi3O8 Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Barite, BaSO * Metal Metal Glass 1. Y, Glass Pr, Dy,4.&Nd, Er Tb, at 4&wt% Lu at 4 wt% Glass 2. Ce,Glass Eu, Ho 5. All & Tm theatREE 4wt% at 0.5 wt% Glass 3. La,Glass Sm, Gd, 6. REE & Ybfree at 4blank wt% ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 20 ㈱ゼネラルサイエンスコーポレーション Comprehensive standard block 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Na Mg Al Si,Ca Ga, P Fe, S K Ti V Cr Mn Fe Co Ni Cu Zn Ge Sb Zr Nb Mo Ag Ba Ta W Ca, F Sr, F Sn Rh Cd, S In, As Hg, Te Bi, Au Pt Hf Pb, Te Se Y La, B Standard Material (* Natural Material) Jadeite, NaAlSi * Periclase, MgO Corundum, Al2O3 Wollastonite, * CaSiO Gallium Phosphide, GaP Pyrite, FeS* Orthoclase, KAlSi3 O8 Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Metal Barite, BaSO * Metal Metal Fluorite, CaF * Strontium Fluoride, * SrF Cassiterite,* SnO Metal Cadmium Sulphide, CdS Indium Arsonide, InAs Mercury Telluride, HgTe Metal Metal Metal Metal Lead Telluride, PbTe Selenium Metal Lanthanum Hexaboride, LaB6 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 21 ㈱ゼネラルサイエンスコーポレーション ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 22 ㈱ゼネラルサイエンスコーポレーション 高分子 特性 Molecular Mass/Weight NIST Polymers (liquid, pellet, and powder forms) 型 番 品 容 量 名 NIST 標準ポリマー : ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 23 ㈱ゼネラルサイエンスコーポレーション BAM 標準ポリマー 品 名 Cat.No. Polystyrene Amorphous material BAM-P002 Polystyrene Pellets BAM-P005 Polystyrene Pellets PMMA BAM-P003 Crystaline material PMMA BAM-P006 Amorphous material PMMA BAM-P007 Crystaline material PEO BAM-P004 Crystaline material PEO BAM-P008 Crystaline material Poly(lactide) BAM-P009 Granulate Poly(lactide) BAM-P010 Crystaline material BAM-P001 Viscosity 粘度 SRM 2490 MW by light scattering g/mol IV by viscosity mL/g 87600 ± 2,91 42,37 ± 1.96 205600 ± 1.49 349800 ± 2.77 68,38 ± 3.85 104.28 ± 2,20 107050 ± 2.33 31.48 ± 3.85 365500 ± 2.96 90.63 ± 1.16 360200 ± 2,73 84,80 ± 2.14 14,28 ± 3.74 20.91 ± 5.37 77450 ± 2.16 61.19 ± 2.62 225200 ± 5.98 125.29 ± 2.43 Avarage MW (Mw & Mn) g/mol Mw:6065 ± 1.46 Mn:5960 ± 1.02 Mw:11400 ± 1.16 Mn:11300 ± 0.95 品 名 Non-Newtonian Polymer Solution for Rheology 容 Bingham Paste Mixture for Rheological Measurements 1.02 ± 0.98 1.01 ± 0.0 量 100 mL Polyisobutylene Dissolved in 2,6,10,14-Tetramethylpentadecane 2492 Mw/Mn MALDITOF-mass spectromety kit for two batches Melt Flow Rate 融解流量率 SRM 品 名 SRM1473b Polyethylene Resin, low density, melt flow = 1.13 g/10 min SRM1474a Polyethylene Resin, melt flow = 5.10 g/10 min SRM1475a Polyethylene,Linear, 2.02 g/min density 0.97844g/cm3 SRM1496 Polyethylene Gas Pipe Resin, melt flow (Unpigmented) 0.26 g/10min Limiting viscosity number in tetrahydrofuran(25℃)37.4mL/g 容 量(g) 50 60 50 900 産総研(NMIJ) 標準ポリマー ポリスチレン2400 CRM5001-a 0.2g 重量平均分子量Mw 2423 ± 20 数平均分子量Mn 2307 ± 18 ピーク平均分子量Mp 2469 ± 17 多分散度 Mw/Mn 1.050 ± 0.016 ポリスチレン500 CRM5002-a 0.4g 重量平均分子量Mw 501.7 ± 6.8 数平均分子量Mn 436.2 ± 5.6 ピーク平均分子量Mp 475.3 ± 8.0 多分散度 Mw/Mn 1.150 ± 0.030 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 24 ㈱ゼネラルサイエンスコーポレーション ポリカーボネート46000 CRM5003-a 0.2g 4 ± 4 質量平均モル質量Mw 4.58 x 10 0.36 x 10 g/mol ポリスチレン100 CRM5004-a 0.4g 重量平均分子量Mw 1012.9 ± 8.6 数平均分子量Mn 868.3 ± 7.3 ピーク平均分子量Mp 1021.4 ± 6.1 多分散度 Mw/Mn 1.167 ± 0.019 ポリエチレングリコール400 CRM5005-a 1g 重量平均分子量Mw 431.2 ± 5.7 数平均分子量Mn 409.0 ± 4.4 ポリエチレングリコール1000 CRM5006-a 1g 重量平均分子量Mw 1084.7 ± 20.8 数平均分子量Mn 1040.6 ± 17.6 ポリエチレングリコール1500 CRM5007-a 1g 重量平均分子量Mw 1601.0 ± 66.8 数平均分子量Mn 1560.6 ± 60.0 ポリスチレン(多分散) CRM5008-a 5g 重量平均モル質量Mw 276,000 ± 15,000 数平均モル質量Mn 94,600 ± 6,400 多分散度 Mw/Mn 2.94 ± 0.17 ポリスチレン8500 NMIJ CRM5009-a 0.3g 8570±190 参考値 数平均分子量 Biomaterials (solid forms) Cat No. / 品名 RM8457 Ultra high molecular weight polyethylene RM8456 Ultra High Molecular Weight Polytheylene 容量 - Young's Modulus Yield Strength Ultimate Strength Elongation Young's Modulus Yield Strength Ultimate Strength Elongation ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 25 ㈱ゼネラルサイエンスコーポレーション OPTICAL PROPATIES / 光 学 特 性 Molecular Absorption (film, filter, solid, and solution forms) /分子吸光標準物質 Cat.No. 品 名 SRM931g Liquid Filters, Absorbance SRM935a Potassium Dichromate, UV Absorbance SRM1921b Infrared Transmission Wavelength SRM1935a Potassium Dichromate Solution/UV Absorbance Standard Wavelength Range (in nm) 容 量 302 to 678 235 to 350 3 µm to 18 µm Set of 12 ampoules 15 g 1 card 235, 247, 313, 350 set of 10 975 to 1946 在庫切れ filter 975 to 1946 25 mm diameter 219 to 865 at 0.5, 1, 2 nm 1 cuv SRM2031b Metal-on-Quartz Filters, Transmittance SRM2035a Near IR Transmissions, Wavelength SRM2036 ERMFB010a Near IR Wavelength /Wavenumber Reflection UV-Visible wavelength Holmium/Neodymium oxide solution ERMFB011a UV-Visible absorbance Sodium nitrate/cobalt chloride/nickel chloride solution 299.4, 395.0, 512.5, 719.0 at 1nm bandwidth 3026.0, 1601.1, 1028.8, -1 698.0cm ERMFB012a IR wavelength - Polystyrene in hexane ERMFB020a UV-Visible wavelength for HPLC detectors- 241 to 797 at 1, 4, 7, Holmium/Neodymium oxide solution 10nm 2 x 3mL ERMFB021a UV-Visible wavelength for HPLC detectors-Sodium nitrate/Cobalt chloride/Nickel chloride solution 8 x 3mL 299.4, 395, 512, 719.0 at 1, 4, 7, 10nm 3 standards + 1 blank 5 x 1mL Molecular Luminescence (solid form) 蛍光標準物質 Wavelength Range 容 量 (nm) 3 x 2 mL SRM1932 Fluorescein 488 to 491 SRM2241 Relative Intensity Correction, Raman Spectroscopy 785 Relative Intensity Correction Standard for Raman Spectroscopy 532 SRM 在庫切れ SRM2243 Relative Intensity Correction, Raman Spectroscopy Cat.No. Description 屈折率 Cat.No. EREM-BD011a EREM-BD012a EREM-BD013a EREM-BD014a EREM-BD015a 品 名 Orange Juice Orange Juice Orange Juice Orange Juice Orange Juice Refractive Index 1.3348 1.3521 1.3673 1.4320 1.4529 Degrees Brix 1.26 12.72 22.07 55.55 64.73 Certified values are given for the refractive indices at six wavelengths, at 20 °C, and for the change in n with respect to temperature, dn/dT valid over the temperature range from 15 °C to 35 °C: n (at 20 °C) d n /dT Cat.No. 品 名 Wavelength(nm) -5 -4 467.8 1.47685 ± 2x10 -3.74x10 -5 -4 480 1.47583 ± 3x10 -3.75x10 Liquid Refractive Index -5 -4 508.6 1.47373 ± 2x10 -3.72x10 SRM1922 Mineral Oil -5 -4 546.1 1.47149 ± 2x10 -3.70x10 30mL -5 -4 643.8 1.46744 ± 2x10 -3.66x10 -5 -4 589.3 1.46945 ± 6x10 -3.68x10 容量 3mL 3mL 3mL 3mL 3mL °C-1 -6 ± 3x10 -6 ± 4x10 -6 ± 2x10 -6 ± 2x10 -6 ± 3x10 -6 ± 2x10 The refractive index corresponds to approximately 71.6 on the Brix scale. ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 26 ㈱ゼネラルサイエンスコーポレーション Cat.No. PRG 7.21 PRG 7.1 PRG 7.11 PRG 7.2 PRG 7.12 PRG 7.20 PRG 7.5 PRG 7.6 PRG 7.13 PRG 7.8 PRG 7.9 RPC18061 RPC18062 RPC18065 RPC1806X RPC1806Y RPC18091 RPC18092 RPC18095 RPC1809X RPC1809Y RPC18121 RPC18122 RPC18125 RPC1812X RPC1812Y 品 名 Water 2,2,4-Trimethylpentan Methylsilicon oil Methylcyclohexane Silicon oil DC 556 Paraffin oil Toluene Chlorobenzene Silicon oil AN 140 1-Bromonaphthalene 1-Iodonaphthalene Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive index liquids Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive Refractive index index index index index index index index index index index index index index index Refractive index 1.333 at 20℃ 1.391 at 20℃ 1.405 at 20℃ 1.423 at 20℃ 1.462 at 20℃ 1.475 at 20℃ 1.496 at 20℃ 1.524 at 20℃ 1.560 at 20℃ 1.657 at 20℃ 1.702 at 20℃ range 1.400-1.458 range 1.400-1.458 range 1.400-1.458 range 1.400-1.458 range 1.400-1.458 range 1.460-1.640 range 1.460-1.640 range 1.460-1.640 range 1.460-1.640 range 1.460-1.640 range 1.642-1.700 range 1.642-1.700 range 1.642-1.700 range 1.642-1.700 range 1.642-1.700 (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval (interval 0.002) 0.004) 0.01) 0.002) 0.002) 0.002) 0.004) 0.01) 0.002) 0.002) 0.002) 0.004) 0.01) 0.002) 0.002) 容量 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 10mL 30 x 7mL 15 x 7mL 6 x 7mL 1 x 7mL 1 x 30mL 91 x 7mL 46 x 7mL 19 x 7mL 1 x 7 mL 1 x 30mL 30x7mL 15 x 7mL 6 x 7mL 1 x 7mL 1 x 30mL Optical Rotation (powder form) 旋光標準物質 Cat.No. 品 名 Optical Rotation (in mrad) Aqueous Solution Wavelength (100 mm cell) GUM8.1 Sucrose(Saccharose) SRM17f Sucrose SRM917c D-Glucose (Dextrose) 546 nm 78.35° 355.68 589 nm 66.53° 302.03 633 nm 882.6 nm 259.51 129.41 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 容 量 (g) 100g 60 50 27 ㈱ゼネラルサイエンスコーポレーション Materials with integral optical properties BAM-V001 S1E 品名 サイズ Optical property Method for estimating the certificate value Essential perameters for measurement BAM-V002 S1E commercial retroreflective film polished black glass used for traffic signs about 100x100mm about 100x100mm specular gloss coefficient of retroreflection DIN67530, ISO2318 DIN67520, CIE-Pub.54 illumination angle: 20℃, 60℃, 85℃ observation angle 0.1 to 2 ℃ entrance angle: -60℃ to 60℃ rotation angle 0 to 360 ℃ Certified value about 95 units Uncertainty (K=2 ) Validity of the certified value Traceability to 0.3 units 1 year PTB typically by the customer Delivery of the material 10 to 50 cd/(lxmm) [customer defined] 5% 1 year PTB typically by the customer Materials with is spectral optical properties 品名 BAM-V004/5 S1E BAM-V007 S1E BAM-V006 S1E BAM-V008 S1E reflection nonfluorescent reference object transparent reference object reflecting fluorescent reference object reflecting fluorescent reference object サイズ typical 50 x 50mmm typical 50 x 50mmm typical 50 x 50mmm special radiance special bispectral transition Optical property factor transmittance factor factor Method for Twoestimating the DIN 5033 DIN 5033 Monochromatorcertificate value Method 45/0, d/8, or 8/d inMeasuring geometry or excluding 0/0 45/0 specular reflection typical 50 x 50mmm total radiance factor DIN 5033 45/0 Wavelength region 380-720 nm 300-2500 nm 300-800 nm 300-800 nm Stepwidth and optical properties 10 nm 10 nm 10 nm 10 nm total, fluorescent, and reflected radiance factor Calculated spectral properties Calculated spectral properties X, Y, Z L, a, b or others X, Y, Z L, a, b or others X, Y, Z L, a, b or others Uncertainty (K=2 ) 1% 1 % to 2 % 1 % to 2 % 2% Validity of the certified value 1 year 1 year 1 year 1 year Traceability to PTB PTB PTB PTB Delivery of the material typically by the customer typically by the customer typically by the customer typically by the customer ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 28 ㈱ゼネラルサイエンスコーポレーション Optical Microscope Linewidth Measurement (photomask) SRM 2800 is used in calibrating magnification and consists of a pattern of parallel lines whose nominal distances from the centerline range from ± 1 m to ± 5mm. Certified values are given for the center-to-center distance of each line from the centerline; the linewidths are not certified. Cat.No. 品 名 SRM2800 Microscope Magnification Linewidth - Pitch 容 量(cm) 在庫切れ - Colour measurement Cat.No. 規 格 品 名 BCR400 Red ceramic tile(tomato paste colour) BCR406A Opal glass BCR406B Opal glass 50mmφ x 14mm 100mmφ x 15mm Microscale Dimensional Measurement Cat.No. 品 名 SRM5000 Overlay Wafer Standard SRM5001 Two-Dimensional Grid Photomask, Std Scanning Electron Microscope Scale Calibration Artifact RM8820 規 格(形状) each cell 1chip イオン活性分析 pH Calibration (powder form) pH計測 These SRMs are used to prepare solutions of known hydrogen ion activity to calibrate commercial pH instruments. SRMs 186g and 191c are each certified for use as an admixture only. SRM 186g o (186-I-g and 186-II-g) may be used to prepare solutions with a pH of 6. 8640 at 25 C, or physiological o buffer solutions with a pH of 7.4157 at 25 C. 品 名 pH(S) Values (at 25oC) 容 量 (in g) Cat.No. SRM 185i Potassium Hydrogen Phthalate, pH Standard 4.005 60 pH Standards: Phosphate buffers SRM186g (Potassium Dihydrogen Phosphate, お問い合わせ下さい 1 set (30 g, 45 g) Disodium Hydrogen Phosphate) SRM187e Sodium Tetraborate Decahydrate (Borax) 30 9.182 SRM188 60 Potassium Hydrogen Tartrate 3.557 SRM189c Potassium Tetroxalate 65 1.677 pH Standards, (set of 191d-I + 191d-II) 10.014 1 set SRM191d SRM2193a Calcium Carbonate 30 12.469 RM8040 Sodium oxalate(reductometric) Reductiometric Assay 99.951% 60 Biological buffeer system Cat.No. 品名 0.05M SRM2181 HEPES free acid 0.08M 0.05M SRM2182 HEPES Sodium salt 0.08M 0.05M SRM2183 MOPSO free acid 0.08M NaMOPSOate free 0.05M SRM2184 acid 0.08M 保証値 pH(0-50℃) : 7.832 pH(0-50℃) : 7.853 pH(0-50℃) : 7.832 pH(0-50℃) : 7.853 pH(0-50℃) : 7.260 pH(0-50℃) : 7.268 pH(0-50℃) : 7.260 pH(0-50℃) : 7.268 容量 - 7.216 7.222 7.216 7.222 6.528 6.534 6.528 6.534 60g 60g 60g 60g ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 29 ㈱ゼネラルサイエンスコーポレーション pD計測 These SRMs are for the preparation of solutions of known deuterium ion activity to calibrate pH instruments to indicate pD data. SRMs 2186II, and 2191a and 2192a are certified for use as admixtures only. Cat.No. SRM2185 SRM2186 SRM2186II SRM2191a SRM2192a 品 pD(S) Values 名 o (at 25 C) 4.518 7.428 7.428 10.732 10.732 Potassium Hydrogen Phthalate Potassium Dihydrogen Phosphate Disodium Hydrogen Phosphate Sodium Bicarbonate Sodium Carbonate 容 量 60g 30g 30g 30g 30g Ion-Selective Electrode Calibration (powder form) These SRMs are certified for the calibration of ion-selective electrodes and have conventional ionic activities based on the Stokes-Robinson hydration theory for ionic strengths greater than 0.1mol/L. Certified Component Cat.No. 品 名 容 量 (g) SRM2201 Sodium Chloride SRM2202 Potassium Chloride SRM2203 Potassium Fluoride pNa, pCl pK, pCl pF 125 在庫切れ 125 Electrolytic Conductivity (liquid form) 電気伝導 品 Cat.No. SRM3190 SRM3191 SRM3192 SRM3193 SRM3198 SRM3199 GUM5.1 GUM5.2 GUM5.3 GUM5.4 GUM5.5 GUM5.6 Nominal Conductivity (μS/cm) at 25℃ 名 HCl in deionized Water Aqueous Electrolytic Conductivity KCl in deionized Water KCl in deionized Water KCl in n-propanol/deionized Water KCl in n-propanol/deionized Water KCl solution KCl solution KCl solution KCl solution KCl solution KCl solution 26.4 99.94 496.73 996.51 5.20 15.36 11.3 S/m at 25℃ 1.285 S/m at 26℃ 0.1410 S/m at 27℃ 0.01483 S/m at 28℃ 0.0720 S/m at 29℃ 0.0293 S/m at 30℃ 容 量 (in mL) 在庫切れ 500 在庫切れ 在庫切れ 在庫切れ 在庫切れ 100 100 100 100 100 100 reagecon electrolytic conductivity standard Cat.No. REACKC84 REACKCS REACKCL REACKC12880 REACKC13 REACK136 REACKC5 REACKC10 REACKC20 REACKC50 REACKC100 REACKC200 REACKC500 REACKC1000 REACKC5M 品 Conductivity Conductivity Conductivity Conductivity 名 standard standard standard standard Electrolytic Conductivity (μS/cm) at 25℃ 84 147 1413 12880 Conductivity standard 1.30 Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity 5 10 20 50 100 200 500 1000 5000 standard standard standard standard standard standard standard standard standard 容 量 (in mL) 500 500 500 500 500 6x250 500 500 500 500 500 500 500 500 500 次ページに続く ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 30 ㈱ゼネラルサイエンスコーポレーション 前ページからの続き REACKC10M REACKC20M REACKC50M REACKC100M REACKC150M REACKC200M REACKC300M REACKC350M REACKC450M REACKC500M Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity Conductivity standard standard standard standard standard standard standard standard standard standard 10000 20000 50000 100000 150000 200000 300000 350.000 450000 500000 500 500 500 500 500 500 500 500 500 500 Conductivity standards ac cording to the European Pharmacopoeia (Chapter 2) Cat.No. REAEP1330 REAEP133 REAEP266 品 名 Conductivity standard Conductivity standard Conductivity standard Electrolytic Conductivity (μS/cm) at 20℃ Resistivity 容 量 (in mL) 1330 133 26.6 752 7519 37594 500 500 500 FIRE RESEARCH Surface Flammability(ASTM E 162-78) Hard Board - Surface SRM1002d flammability Flame Spread Index, I = 203 Heat Evolution Factor , Q = 42.0 Cigarette Ignition Strength, Standard SRM1082 Cigarette ignition strength standard ignition Strength ASTM-IP Method (on 10 layers of filter paper) E2187-04(a) 在庫切れ 10 packs Certified Value & Expanded Uncertainty 12.6 % ± 3.3% 工学性能試験 Microindentation Hardness (block form) Unit Size : 1.15cm x 1.15cm (unless otherwise noted) Cat No. SRM1893 SRM1894a SRM1895 SRM1896b SRM1905 SRM1906 SRM1907 SRM1908 SRM1909 SRM2798a SRM2830 SRM2831 品 名 Bright Copper (Knoop) Bright Copper (Vickers) Bright Nickel (Knoop) Bright Nickel (Vickers) Bright Nickel (Knoop) Bright Nickel (Knoop) Bright Nickel (Knoop) Bright Nickel (Vickers) Bright Nickel (Vickers) Bright Nickel (Vickers) Ceramic, Silicon Nitride (Knoop) Ceramic, Tungsten Carbide (Vickers) Load (Newtons) Hardness, nominal (kgf/mm 2 ) 0.245, 0.490, 0.981 0.245, 0.490, 0.981 0.245, 0.490, 0.981 0.245, 0.490, 0.981 2.943 4.905 9.81 2.943 9.81 4.905 19.6 9.8 125 125 600 600 600 600 600 each each 600 1500 1530 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 31 ㈱ゼネラルサイエンスコーポレーション Mechanical properties ERMI-FA013 Charpy specimens 30 J (bars) ERMI-FA014 Charpy specimens 60 J (bars) ERMI-FA015 Charpy specimens 80 J (bars) ERMI-FA016 Charpy specimens 120 J (bars) Absorbed energy(KV)at 20 ± 2℃ set 5 30 J nominal Absorbed energy(KV)at 20 ± 2℃ set 5 60 J nominal Absorbed energy(KV)at 20 ± 2℃ set 5 80 J nominal Absorbed energy(KV)at 20 ± 2℃ set 5 120 J nominal 次ページへ続く 前ページから続き Absorbed energy(KV)at 20 ± 2℃ ERMI-FA415 Charpy specimens 160 J (bars) SRM2092 SRM2096 SRM2097 Low-Energy (4340 Alloy Steel) Low-Energy Charpy (88-136J) 160 J nominal Enegy Range (J) 13 to 20 Enegy Range (J) 88 to 136 High Energy Charpy (Self-Verification) Energy and Expanded (–40℃± 1℃) 101.9 BCR425 Nimonic 75 Creep rate BCR661A Nimonic 75 for ambient air tansile properties BCR661B Nimonic 75 for ambient air tansile properties Creep rate at 400h time to 2% strain time to 4% strain set 5 set set set -6 72 x 10 /h 278h 557h 0.2%proof stress Rp0.2 300 ± 7 Mpa 0.5%proof stress Rp0.5 318 ± 7 Mpa Tensile stress Rm 750 ± 13 Mpa Elongation at fracture A40.9 ± 0.9% Reduction in area at fracture Z 60± 4% 0.2%proof stress Rp0.3 300 ± 7 Mpa 0.5%proof stress Rp0.6 318 ± 7 Mpa Tensile stress Rm 750 ± 13 Mpa Elongation at fracture A40.9 ± 0.9% Reduction in area at fracture Z 60± 4% set 3 set 3 rod BCR692 Scratch test reference material SRM2100 Fracture Toughness of Ceramics:Silicon Nitride Flexure Specimens 4.57MPa・m1/2 coupons 5bars Rockwell Hardness SRM2810 Rockwell C Scale Hardness (high Range) SRM2811 Rockwell C Hardness, Mid Range SRM2812 Rockwell C Scale Hardness (high Range) RM8130 Coplaner waveguide calibration set RM8458 Artificial flaw for eddy current nondestructive evalution each each each each 7 x 7 x 2(cm) SRM2816 SRM2817 SRM2818 SRM2819 SRM2820 SRM2821 Rockwell Rockwell Rockwell Rockwell Rockwell Rockwell Hardness Hardness Hardness Hardness Hardness Hardness 15N 15N 15N 30N 30N 30N Nominal Hardness(HRC) 25 Nominal Hardness(HRC) 45 Nominal Hardness(HRC) 62 Flaw size 3.0mmx0.1mm Scale Low Range (Nominal 72 HR 15N) Scale Mid Range (Nominal 83 HR 15N) Scale,High Range (Nominal 91 HR 15N) Scale Low Range (Nominal 45 HR30N) Scale Mid Range (Nominal 64 HR30N) Scale High Range (Nominal 79 HR30N) Nominal Nominal Nominal Nominal Nominal Nominal Hardness Hardness Hardness Hardness Hardness Hardness 1 1 1 1 1 1 block block block block block block Tape Adhesion Testing SRM1810aLineboard - Tape adhesion testing (sheet form) 50 sheets : 21.6x28cm ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 32 ㈱ゼネラルサイエンスコーポレーション Bleached Kraft Pulps Cat.No. RM8495 RM8496 品 名 Narthern Softwood Eucalyptus Hardwoods 規 格 10 lap sheets : 0.5kg 10 lap sheets : 0.5kg Magnetic Moment Standard Magnetic moment standard- Nickle disk SRM762 δ= 54.78Am2/kg ± 0.15Am2/kg(54.78emu/g ± 0.15emu/g) Magnetic moment standard yttriun iron garnet sphere SRM2853 SRM772a Nickel sphere for magnetic moment m=3.47mA・m2 ± 0.01mA・m2 (3.47emu ± 0.01emu) 6φx 0.13mm sphere:1mmφ (2.8mg) sphere:2.383mmφ Secandary Ferrite Number(FN) Materials Ferrite Number 0 to 30 30 to 120 Cat.No. RM8480 RM8481 サイズ 10 x 12 x 20 mm 10 x 12 x 20 mm ゴム(Rubber), その他 Standard reference elastomers (SRE) from vulcanized rubbers エラストマー( 弾性体 ) Cat. No. 品 名 規 格 for determination of abrasion resistance of vulcanized rubber ccording to DIN 53516 and ISO 4649-2002 reference compound No.1 BAM-E001 Rubber test sheet BAM-E002 Abrasive paper sheet according to DIN 53516 and ISO 4649-2002 ; Annex A BAM-E003 Rubber test sheet for determination of abrasion resistance of vulcanized rubber ccording to ISO 4649-2002 reference compound No.2 BAM-E004 Rubber sole sheet for measuring the electrostatic charging of floor by a walking test BAM-E005 Rubber base ring BAM-E006 /BAM-E007 Rubber silinder BAM-E008 Elastomer BAM-E009 Elastomer BAM-E010 Elastomer BAM-E011 Elastomer for the portable tester for measuring the surface roughness of strests (Efflux meter according to MOORE) for the British prtable for measuring the surface grip property of streets (skid resistance tester ; SRT) according to ASTM E 303-93 and for the friction measuring device for the determination of the PSV-value(polished stone value) DIN 53538 SRE-NBR 1/ISO 13226 SRE-NBR 28/PX designated for hydraulic area(valcanized with peroxide, low elongation at break) DIN 53538 SRE-NBR 28/ISO 13226 SRE-NBR 28/SX designated for automotive area(valcanized with thiurame, high elongation at break) DIN 53538 SRE-NBR 34/ISO 13226 SRE-NBR 34/SX designated for automotive area(valcanized with thiurame, high elongation at break) DIN 53538 SRE-HNBR 19/ISO 13226 SRE-HNBR 1X designated for hydraulic area(valcanized with peroxide) ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 33 ㈱ゼネラルサイエンスコーポレーション BAM-E012 Elastomer DIN 53538 SRE-ACM /ISO 13226 SRE-ACM / 1X designated for hydraulic and automotive area BAM-E013 Elastomer DIN 53538 SRE-MVQ /ISO 13226 SRE-VMQ /1x designated for hydraulic and automotive area (vulcanized with peroxide) BAM-E014 Elastomer ISO 13226 SRE-FKM/2x / ISO 6072 FKM2 designated for hydraulic and automotive area BAM-E015 Elastomer ISO 6072 NBR 1 designated for hydraulic and automotive area BAM-E016 Elastomer ISO 6072 NBR 2 designated for hydraulic and automotive area BAM-E017 Elastomer ISO 13226 SRE-NBR L designated for hydraulic and automotive area (vulcanized with thiurame, low content acrylonitrile) BAM-E018 Elastomer ISO 13226 SRE-NBR M designated for hydraulic and automotive area (vulcanized with thiurame, medium content acrylonitrile) BAM-E019 Elastomer ISO 6072 EPDM 1 designated for hydraulic and automotive area BAM-E020 Elastomer ISO 6072 HNBR 1 designated for hydraulic and automotive area Rubber (ゴム) / 化合物 IRM021 Stearic Acid ASTM D 11 1carton (800gx4)/3.2kg Local AR-value Acid Number (D1980-91) +/- 3 σ= 194.36 +/- 0.38 Secamdary Propary Iodine Number (D 1959-58) +/-σ= 0.56 +/-0.29 Heavy maetals(Co, Cu, Fe, Mn, Ni, Zn) Each less than 10ppm ( The 3 σlimits are based on 15 DF; 1 limits are approximate, 3 DF ) IRM031 Surfur ASTM D 11 1carton (1500g x 4)/6kg Local AR-value Oil content(D4573-95) +/- 3 σ= 7.85 +/- 0.56 Secamdary Propary Wet Sieve (D 4572-89) (% through #100) +/- 1σ= 99.97+/-0.018 Wet Sieve (D 4572-89) (% through #200) +/- 1σ= 97.0+/-0.072 ( The 3 σlimits are based on 15 DF; 1 limits are approximate, 3 DF ) IRM091 Zinc Oxide ASTM D 11 AR-value,m2 /gm Test Lot-Limits,m2 /gm (in Production Lab) Between Lab-Limits,m2/gm (among Typical Labs) Supplementary Information ZnO : % (dry) = 99.9 Pb : (ppm) = 16 Cd = 2 IRM241"F" 500g 4.30 +/-0.074 +/-0.26 Fe : (ppm) = 2 Heat Loss / H2O -325 : % =99.999 Butyl rubber 1bale (34kg)g Within Typical Lab Test ML(1+4) ML(1+8) ML(1+4) ML(1+8) @ @ @ @ 100℃ 100℃ 125℃ 125℃ Sr 0.28 0.23 0.28 0.18 2 x Sr 0.55 0.46 0.56 0.36 3 x Sr 0.83 0.69 0.85 0.54 Between Typical Labs Sr 0.28 0.37 0.44 0.29 2 x Sr 0.56 0.73 0.44 0.29 3 x Sr 0.84 1.10 1.32 0.86 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 34 ㈱ゼネラルサイエンスコーポレーション Chemical resistance (durability) of glass Cat.No. SRM622 SRM623 品 名 Volume of 0.02NH2SO4 容 量 7.67 mL 0.343 mL 2.2kg 2.2kg Soda lime silica (durabiluty) Borosilicate glass (Durability) Multi-test verification materials (MTVMs) SS99850-0 SETA MTVM kerosine(jet turbine fuel) test Name ASTM-IP Method Distililation IBP D86-IP123 Distililation 10% D86-IP123 Distililation 50% D86-IP123 Distililation 90% D86-IP123 Distililation FBP D86-IP123 Distililation residue D86-IP123 Distililation loss D86-IP123 Flashpoint IP170 Freezing point D2386-IP16 Aromatics FIA D1319-IP156 Smoke point D1322 Acid number D3242-IP354 mercaptans D32427-IP3422 SS99851-0 SETA MTVM Gas oil test Name ASTM-IP Method Density at 15℃ D1298-IP160 Distililation IBP D86-IP123 Distililation 10% D86-IP123 Distililation 50% D86-IP123 Distililation 90% D86-IP123 Distililation 95% D86-IP123 Distililation FBP D86-IP123 Distililation residue D86-IP123 Distililation loss D86-IP123 Flashpoint D93-IP34 Cloud point D2500-IP219 CFPP IP309 Pour point D97-IP15 Kin.Visc.(40℃) D445-IP71 Lubricity HFRR D6079; IP450 Water Karl Fischer D1744; IP438 SS99852-0 SETA MTVM Fuel oil test Name ASTM-IP Method Density at 15℃ D1298-IP160 Pour point D97-IP15 Kin.Visc.(50℃) D445-IP71 Kin.Visc.(500℃) D445-IP71 Micro carbon D4530; IP398 Flash point D93(b); IP34(b) SS99853-0 SETA MTVM lubicating oil test Name ASTM-IP Method Kin.Visc.(40℃) D445-IP71 Kin.Visc.(100℃) D445-IP71 Viscosity Index D2270-IP226 Pour point D97-IP15 Flash point D93- IP34 Cold cranking sim D5293; IP383 range 140-180℃ 159-188℃ 192-218℃ 220-247℃ 244-268℃ 1.1-1.35% vol 0.4-0.7% vol 35-60℃ -62 to -44℃ 18.1-22.7% vol 22-25mm <0.100mgKOH/g 0.0003to0.0100%(m/m) 500mL Amount/test 100mL 100mL 100mL 100mL 100mL 100mL 100mL 85mL 25mL 0.75mL 20mL 100mL 40mL range 0.94-0.994kg/L -14 to 17℃ 150-1800mm2/s 29-95mm2/s 0.10 to 30.0%(m/m) 92.3 to 121.6℃ 500mL Amount/test 200mL 100mL 100mL 100mL 100mL 100mL 100mL 100mL 100mL 75mL up to 38mL 45mL up to 38mL up to 40mL 2mL 5mL 500mL Amount/test 200mL up to 38mL up to 500mL up to 500mL 2mL 75mL range 70-160mm2/s 10-19mm2/s 139 - 180 -49.1 to 33.9℃ 196 to 213℃ 3062-6896 mPa.s 500mL Amount/test up to 40mL up to40mL up to80mL 38mL 75mL 5mL range 0.83-0.854kg/L 160-190℃ 200-242℃ 260-290℃ 320-350℃ 335-368℃ 350-385℃ 1.25-1.42% vol 0.26-0.55% vol 56-80℃ -17 to -4℃ -30.0 to -0℃ -33 to -6℃ 2.3-3.5mm2/s 271 to 512μm 23.4 to 63.9mg/kg ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 35 ㈱ゼネラルサイエンスコーポレーション SS99854-0 SETA MTVM motor gasoline test Name ASTM-IP Method Motor octane no D2700 Research octane no D1298-IP160 Density at 15℃ D1298-IP160 Distililation IBP D86-IP123 Distililation 70℃ D86-IP123 Distililation100℃ D86-IP123 Distililation150℃ D86-IP123 Distililation FBP D86-IP123 Aromatics FIA D1319-IP156 Olefins FIA D1319-IP156 Saturates D1319-IP156 Vapour Pressure D5191; IP394 range 83 - 90 96 - 101 0.71-0.763kg/L 32.0-39.0℃ 15-36% vol 36-58℃ 75-90℃ 175-205℃ 19-42% vol 1.5-15% vol 42-72% vol 50 to 85kPa 500mL Amount/test 200mL 100mL 100mL 100mL 100mL 100mL 0.75mL 0.75mL 0.75mL 3mL Relative humidity Cat.No. HM11 HM22 HM33 HM54 HM75 HM80 HM90 Relative Relative Relative Relative Relative Relative Relative 品 名 humidity standard humidity standard humidity standard humidity standard humidity standard humidity standard humidity standard Nominal Nominal Nominal Nominal Nominal Nominal Nominal 規 格 humidity std. humidity std. humidity std. humidity std. humidity std. humidity std. humidity std. 11% 22% 33% 54% 75% 80% 90% 容量 unit unit unit unit unit unit unit Miscellaneous SRM953 Cobalt in aluminium - Neutron density monitor wire Cobalt Composition(wt.%) 0.116 ご注文・お問合せ:TEL.03(5927)8356 FAX.03(5927)8357 e-mail : standard@shibayama.co.jp 0.5mmx1m 36
© Copyright 2024 Paperzz