S30 Series PROX Light ® Remote Head 30mm Barrel Style Housing M12 Quick Disconnect from driver to remote head 31mm length remote head Driver built in – No External wiring to a driver PNP and NPN Strobe input Continuous operation or Strobe mode Dimmable via built in potentiometer Electrical Input Voltage - 24 VDC +/- 10% Analog Intensity Maximum 6 Watts The output is adjustable from 0-100% of brightness by a 0 -10 VDC signal Dimmable The output is manually adjustable from 0-100% of brightness by potentiometer Continuous Mode Light will be in continuous mode by leaving signal on strobe input Strobe PNP Ź +5VDC or greater to activate. NPN Ź GND (<1VDC) to activate The Light will operate in either continuous or strobe mode. In strobe mode, the output pulse width will track the pulse width of the strobe pulse. Strobe Mode Standard M12 mating cable color code: 1 = 24VDC 2 = NPN STROBE 3 = GND 4 = PNP STROBE 5 = 0-10VDC Analog BROWN WHITE BLUE BLACK *GRAY (GREEN/YELLOW) * 5 pin Standard M12 mating cable must be used: +VDC must be connected to pin 5 if Analog 0-10 VDC is not used. S30 – XXX – RMH ņ» Part Number Key Product Family: Spot Light 30mm Barrel Color: 625 – Red White – WHI 470 – Blue 505 – Cyan 530 – Green 590 - Yellow IR 850nm IR 940nm UV 395nm UV 365nm Smart Vision Lights • 1887 Holton Rd. • Suite D 353 • Muskegon, MI 49445 •Phone 231.722.1199 www.smartvisionlights.com W W W. S T E M M E R- I M A G I N G . C O M . I M A G I N G I S O U R PA S S I O N GERMANY AU ST R I A Phone: +49 89 80902-0 info@stemmer-imaging.de UNITED KINGDOM IRELAND Phone: +44 1252 780000 info@stemmer-imaging.co.uk FRANCE Phone: +33 1 45069560 info@stemmer-imaging.fr SW I T Z E R L A N D L I E C H T E N ST E I N Phone: +41 55 415 90 90 info@stemmer-imaging.ch THE NETHERLANDS B E LG I U M . L U X E M B O U R G Phone: +31 575 495159 info@stemmer-imaging.nl B-SVL9-08/2013 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document. Features
© Copyright 2024 Paperzz
