RMR Free-Standing Wall-Mount A06 A07 A08 A09 A10

PRODUCT DATA SHEET
Protecting your technology investment.
RMR® Free-Standing Enclosures
ADVANTAGES
RMR® Free-Standing
Advanced formed-in-place foam gasket
technology to meet NEMA Type 4 and 12
protection ratings
Enclosures provide NEMA
Type 4 and 12 protection for
large electronic components
CPI Product Designer, free online
configurator, allows quick selection of
sizes and design configurations to match
most requirements
and controls that require
sturdy mounting.
Dual-access configuration provides
access from the front or rear side of the
enclosure and for back-to-back platemounting option
NEMA Type 4 Enclosure
KEY FEATURES
•Sealed with formed-in-place foam
gasket technology to meet NEMA Type
4 and 12 protecton ratings
•Solid single or double door with
3-point latch and heavy-duty padlock
swinghandle(s). Auxiliary ¼-turn
latches are included on top and bottom
of NEMA Type 4 enclosures that are
30”W (762 mm) or wider
•Mounting channels along both sides,
top and bottom provide adjustable
depth mounting locations for optional
mounting plates and other accessories;
mounting plate ordered separately
•Three lock styles available: keyed,
double bit and square
Various accessory options support indoor
and outdoor use
SPECIFICATIONS
Description
Overall Dimensions
Materials and
Construction
•Grounding and bonding studs included
on doors and frame; optional grounding
and bonding kit sold separately to bond
enclosure to the plate.
•Powder-coated paint
Mounting channels allow mounting plate
(ordered separately) to be installed frontto-rear within the enclosure
Finishes
Compliance
Installation
Free-standing industrial control enclosure for use in indoor and outdoor applications. Protects
equipment against the ingress of dust, lint and other debris, as well as dripping and splashing from
noncorrosive liquids.
NEMA Type 12, for indoor use, protects against dirt and dripping and light splash of noncorrosive
liquid. It also meets NEMA Type 1 and 5; NEMA Type 2 with drain hole and NEMA Type 3R with drain
hole and drip shield.
NEMA Type 4, for outdoor use, protects against dirt, rain, sleet, snow, splash and hose down with
noncorrosive liquid. It also meets NEMA Type 1, 3, 5, 12; and NEMA Type 2 and 3R with drain hole.
Specific to each enclosure; see ordering information on following pages
Frame:
- Welded, steel frame
- Single or dual access
- Mounting channels along the top, bottom and sides of enclosure’s interior
- Heavy-duty lifting eye bolts on top: (2) on enclosures 24”W (610 mm) or less, and (4) on
enclosures wider than 24”W (610 mm)
- Optional solid, removable mounting plate (ordered separately)
Door:
- Solid single or double door
- 3-point latch mechanism; auxiliary ¼-turn latch for NEMA Type 4 enclosures that are 30”W
(762 mm) or wider
- Concealed hinges
- Black powder-coated, zinc die cast, heavy-duty padlock swinghandle
- Bonding stud and wire included
Formed-in-place foam gaskets around door opening
Powder-coated paint
Hammer Gray (RAL 7035), Gray ANSI 61, Black
Additional finish options available upon request
NEMA Type 1, 2, 3, 3R, 4, 5, and 12
IP 55 and IP 66
Sealed enclosure, no provisions for attaching to structure
Field-modify to secure to building structure
Availability: US, Canada, Latin America, Europe and Middle East
US & Canada
+1-800-834-4969
Toronto, Ontario, Canada
+905-850-7770
chatsworth.com
techsupport@chatsworth.com
Latin America
+52-55-5203-7525
Toll Free within Mexico
01-800-01-7592
chatsworth.com.co
Europe
+44-1628-524-834
chatsworth.com
Middle East & Africa
Dubai, UAE
+971-4-2602125
chatsworth.ae
Asia Pacific
+86 21 6880-0266
chatsworth.com.cn
PRODUCT DATA SHEET
RMR® Free-Standing Enclosures
NEMA Type 4 and 12 Ratings for Nonhazardous Locations
RMR Free-Standing Enclosures by Chatsworth Products (CPI) provide exceptional
material ingress protection for panel-mount networking, automation, control
and instrumentation equipment in nonhazardous indoor and outdoor locations.
The RMR Free-Standing Enclosure features a completely sealed, welded steel
frame with robotically applied formed-in-place foam gaskets, which maintain
the enclosure’s NEMA Type 4 and 12 protection ratings.
The enclosure can be configured with single or dual access, solid single or
double doors with a three-point latch mechanism. NEMA Type 4 enclosures with
double doors feature removable center beam to maintain sealing performance
between doors.
Remove the center beam to conveniently mount large equipment onto the
mounting plate, or to install the mounting plate with preinstalled equipment
onto the frame. NEMA Type 12 enclosures feature overlapping solid double
doors with three-point latch, but do not include a center beam. Three lock styles
are available: keyed, double bit and square.
Enclosures have mounting channels along the sides, top and bottom for
attaching mounting plates (ordered separately) or other accessories. The
mounting plate can be placed anywhere along the enclosure’s mounting
channels. Dual-access configuration is available for equipment access from
either the front or rear of the enclosure and for back-to-back plate mounting.
DIMENSIONS
P/N A06-HHWWDD-X00
P/N A07-HHWWDD-X00
Frame Assembly
Frame Assembly
3-Point Latch Assembly
Door Assembly
Door Assembly
Door Assembly
3-Point Latch Assembly
3-Point Latch Assembly
P/N A08-HHWWDD-X00
P/N A09-HHWWDD-X00
Frame Assembly
Frame Assembly
Door Assembly
Door Assembly
3-Point Latch Assembly
3-Point Latch Assembly
P/N A10-HHWWDD-X00
Frame Assembly
Door Assembly
3-Point Latch Assembly
Door Assembly
3-Point Latch Assembly
2
Chatsworth Products
PRODUCT DATA SHEET
RMR® Free-Standing Enclosures
ORDERING INFORMATION
AXX-HHWWDD-X00
1. First set of digits represents cabinet type: NEMA Type, mounting style, number of doors
2. Second set of digits represents dimensions: height, width and depth in inches
3. Third set of digits represents the enclosure’s options: color, latch style, door style, accessories, etc.
4. For simplified ordering and full range of sizes and configurations, go to the CPI Product Designer at
www.chatsworth.com/product-designer.
RMR Free-Standing Enclosure, Type 12, with Solid Double Door
NEMA Type 12 enclosure is for indoor use and protects against dirt and dripping and light splash of
noncorrosive liquid.
• Designed for NEMA Type 12 applications. Also meets NEMA Type 1, 2, 5; and 3R with drain hole and drip
shield (hole must be between 1/8" to 1/4" (3 mm - 6 mm)
• Overlapping solid double door with 3-point latch mechanism provides easy access for control plate
installation
• Latch style: 3-point mechanism with heavy-duty padlock swinghandle
• 3 lock styles: keyed CH751, double bit and square
• Min and max height: 60"H - 90"H (1524 mm - 2286 mm)
• Min and max widths: 48"W - 72"W (1219 mm - 1829 mm)
• Min and max depths: 18"D - 36"D (457 - 914)
• 3 colors available: Gray ANSI 61, Hammer Gray RAL7035 and Black
• 4 eye bolts are included with enclosures that are over 24”D (610 mm)
• Order mounting plate(s) separately; use CPI Product Designer for quick and easy selection.
Part
Number
Enclosure Height
in (mm)
Enclosure Width
in (mm)
Enclosure Depth
in (mm)
Matching
Mounting Plate
Matching Drip
Shield Assembly
A06-604818-X00
60 (1520)
48 (1220)
A06-724818-X00
72 (1830)
48 (1220)
18 (460)
DF0005-604800-X01
DF0018-004800-X01
18 (460)
DF0005-724800-X01
A06-726018-X00
72 (1830)
DF0018-004800-X01
60 (1520)
18 (460)
DF0005-726000-X01
DF0019-006000-X01
A06-727218-X00
72 (1830)
72 (1830)
18 (460)
DF0005-727200-X01
DF0020-007200-X01
A06-904820-X00
90 (2290)
48 (1220)
20 (510)
DF0005-904800-X01
DF0018-004800-X01
A06-907220-X00
90 (2290)
72 (1830)
20 (510)
DF0005-907200-X01
DF0020-007200-X01
A06-724824-X00
72 (1830)
48 (1220)
24 (610)
DF0005-724800-X01
DF0018-004800-X01
A06-904824-X00
90 (2290)
48 (1220)
24 (610)
DF0005-904800-X01
DF0018-004800-X01
A06-726024-X00
72 (1830)
60 (1520)
24 (610)
DF0005-726000-X01
DF0019-006000-X01
A06-727224-X00
72 (1830)
72 (1830)
24 (610)
DF0005-727200-X01
DF0020-007200-X01
A06-907224-X00
90 (2290)
72 (1830)
24 (610)
DF0005-907200-X01
DF0020-007200-X01
A06-726036-X00
72 (1830)
60 (1520)
36 (910)
DF0005-726000-X01
DF0019-006000-X01
A06-907236-X00
90 (2290)
72 (1830)
36 (910)
DF0005-907200-X01
DF0020-007200-X01
P/N AO6-HHWWDD-X00 Dimensions
36.0 [914.4] MAX
18.0 457.2 MIN
.8 19.8
72.0 1828.8 MAX
48.0 [1219.2] MIN
3.1 77.7
Note: X=color: (-C00) for Black, (-G00) for Hammer Gray RAL 7035, (-H00) for Gray ANSI 61.Size in inches. Other sizes and lock styles
available. Mounting plate (ordered separately) is 12" smaller than height and 4" smaller than width of enclosure. Plate mounts on mounting
channels and symetrically horizontally.
90.0 [2286] MAX
60.0 1524.0 MIN
7.1 179.3
2X 1.6 39.6
Additional Sizes Available Online
Fast, easy
configuration
and ordering.
CPI Product Designer creates unique industrial enclosures quickly and easily by
allowing you to select the size, features and accessories needed for a specific
application. Access this tool at www.chatsworth.com/product-designer.
3
Chatsworth Products
PRODUCT DATA SHEET
RMR® Free-Standing Enclosures
ORDERING INFORMATION
RMR Free-Standing Enclosure, Type 12, Dual Access with Solid Double Door
NEMA Type 12 enclosure is for indoor use and protects against dirt and dripping and light splash of
noncorrosive liquid.
• Designed for NEMA Type 12 applications. Also meets NEMA Type 1, 2, 5; and 3R with drain hole and
drip shield (hole must be between 1/8" to 1/4" (3 mm - 6 mm)
• Dual access provides additional mounting plate placement and access to either front or rear of the
enclosure
• Overlapping solid double door with 3-point latch mechanism provides easy access for control plate
installation
• Latch style: 3-point mechanism with heavy-duty padlock swinghandle
• 3 lock styles: keyed CH751, double bit and square
• Min and max height: 72"H - 90"H (1829 mm - 2286 mm)
• Min and max widths: 48"W - 72"W (1219 mm - 1829 mm)
• Min and max depths: 24"D - 36"D (610 mm - 914 mm)
• 3 colors available: Gray ANSI 61, Hammer Gray RAL7035 and Black
• 4 eye bolts are included with enclosures that are over 24”D (610 mm)
• Order mounting plate(s) separately; use CPI Product Designer for quick and easy selection.
Part
Number
Enclosure Height
in (mm)
Enclosure Width
in (mm)
Enclosure Depth
in (mm)
Matching
Mounting Plate
Matching Drip
Shield Assembly
A07-724824-X00
72 (1830)
48 (1220)
A07-726024-X00
72 (1830)
60 (1520)
24 (610)
DF0005-724800-X01
DF0018-004800-X01
24 (610)
DF0005-726000-X01
A07-727224-X00
72 (1830)
DF0019-006000-X01
72 (1830)
24 (610)
DF0005-727200-X01
DF0020-007200-X01
A07-907224-X00
A07-726036-X00
90 (2290)
72 (1830)
24 (610)
DF0005-907200-X01
DF0020-007200-X01
72 (1830)
60 (1520)
36 (910)
DF0005-726000-X01
A04-727224-X00
DF0019-006000-X01
72 (1830)
72 (1830)
24 (610)
DF0002-727200-X01
DF0020-007200-X01
P/N AO7-HHWWDD-X00 Dimensions
36.0 [914.4] MAX
24.0 609.6 MIN
.8 19.8
Note: X=color: (-C00) for Black, (-G00) for Hammer Gray RAL 7035, (-H00) for Gray ANSI 61. Size in inches. Other sizes and lock styles
available. Mounting plate (ordered separately) is 12" smaller than height and 4" smaller than width of enclosure. Plate mounts on mounting
channels and symetrically horizontally.
72.0 [1828.8] MAX
48.0 1219.2 MIN
3.1 77.7
90.0 [2286.0] MAX
72.0 1828.8 MIN
7.1 179.3
2X 1.6 39.6
Additional Sizes Available Online
Fast, easy
configuration
and ordering.
CPI Product Designer creates unique industrial enclosures quickly and easily by
allowing you to select the size, features and accessories needed for a specific
application. Access this tool at www.chatsworth.com/product-designer.
4
Chatsworth Products
RMR® Free-Standing Enclosures
PRODUCT DATA SHEET
ORDERING INFORMATION
RMR Free-Standing Enclosure, Type 4, with Solid Double Door
NEMA Type 4 enclosure is for outdoor use and protects against dirt, rain, sleet, snow, splash and hose
down with noncorrosive liquid.
• Designed to meet NEMA Type 4 applications. Also meets NEMA Type 1, 2, 3, 5, 12 and 3R with drain
hole (hole must be between 1/8" to 1/4" (3 mm - 6 mm)
• Solid double doors and center beam. Removable center beam provides convenient installation of
mounting plate
• 3 lock styles: keyed CH751, double bit and square
• Latch style: 3-point mechanism with heavy-duty padlock swinghandle. Auxiliary ¼-turn latches are added
on top and bottom of enclosures that are 30”W (762 mm) or wider
• Min and max height: 60"H - 90"H (1524 mm - 2286 mm)
• Min and max widths: 48"W - 72"W (1219 mm - 1829 mm)
• Min and max depths: 18"D - 36"D (457 mm - 914 mm)
• Powder-coated paint
• 3 colors available: Gray ANSI 61, Hammer Gray RAL7035 and Black
• 4 eye bolts are included with enclosures that are over 24”D (610 mm)
• Order mounting plate(s) separately; use CPI Product Designer for quick and easy selection.
Part
Number
Enclosure Height
in (mm)
Enclosure Width
in (mm)
Enclosure Depth
in (mm)
Matching
Mounting Plate
Matching Drip
Shield Assembly
A08-604818-X00
60 (1520)
48 (1220)
18 (460)
DF0005-604800-X01
DF0018-004800-X01
A08-724818-X00
72 (1830)
A08-725418-X00
72 (1830)
48 (1220)
18 (460)
DF0005-724800-X01
DF0018-004800-X01
54 (1370)
18 (460)
DF0005-725400-X01
DF0018-005400-X01
A08-726018-X00
A08-904919-X00
72 (1830)
60 (1520)
18 (460)
DF0005-726000-X01
DF0019-006000-X01
90 (2290)
49 (1240)
19 (480)
DF0005-904900-X01
DF0018-004900-X01
A08-906119-X00
90 (2290)
61 (1550)
19 (480)
DF0005-906100-X01
DF0019-006100-X01
A08-725121-X00
72 (1830)
51 (1300)
21 (530)
DF0005-725100-X01
DF0018-005100-X01
A08-725721-X00
72 (1830)
57 (1450)
21 (530)
DF0005-725700-X01
DF0018-005700-X01
A08-606321-X00
60 (1520)
63 (1600)
21 (530)
DF0005-606300-X01
DF0019-006300-X01
A08-726321-X00
72 (1830)
63 (1600)
21 (530)
DF0005-726300-X01
DF0019-006300-X01
A08-906321-X00
90 (2290)
63 (1600)
21 (530)
DF0005-906300-X01
DF0019-006300-X01
A08-726624-X00
72 (1830)
66 (1680)
24 (610)
DF0005-726600-X01
DF0019-006600-X01
A08-726927-X00
72 (1830)
69 (1750)
27 (690)
DF0005-726900-X01
DF0019-006900-X01
A08-906927-X00
90 (2290)
69 (1750)
27 (690)
DF0005-906900-X01
DF0019-006900-X01
P/N AO8-HHWWDD-X00 Dimensions
36.0 [914.4] MAX
18.0 457.2 MIN
.8 19.8
72.0 [1828.8] MAX
48.0 1219.2 MIN
3.8 95.3
3.1 77.7
90.0 [2286] MAX
60.0 1524.0 MIN
Note: X=color: (-C00) for Black, (-G00) for Hammer Gray RAL 7035, (-H00) for Gray ANSI 61. Size in inches. Other sizes and lock styles
available. Mounting plate (ordered separately) is 12" smaller than height and 4" smaller than width of enclosure. Plate mounts on mounting
channels and symetrically horizontally.
7.1 179.3
2X 1.6 39.6
Additional Sizes Available Online
Fast, easy
configuration
and ordering.
CPI Product Designer creates unique industrial enclosures quickly and easily by
allowing you to select the size, features and accessories needed for a specific
application. Access this tool at www.chatsworth.com/product-designer.
5
Chatsworth Products
RMR® Free-Standing Enclosures
PRODUCT DATA SHEET
ORDERING INFORMATION
RMR Free-Standing Enclosure, Type 4 and 12, with Solid Single Door
NEMA Type 4 and 12 enclosures are for either indoor or outdoor use and protect against dirt, rain, sleet,
snow, splash and hose down with noncorrosive liquids.
• Designed for NEMA Type 4 and 12 applications. Also meets NEMA Type 1, 2, 3, 5 and 3R with drain
hole (hole must be between 1/8" to 1/4" (3 mm - 6 mm).
• 3 lock styles: keyed CH751, double bit and square
• Latch styles: 3-point mechanism with heavy-duty padlock swinghandle. Auxiliary ¼-turn latches are added
on top and bottom of enclosures that are 30”W (762 mm) or wider
• Min and max height: 60"H - 90"H (1524 mm - 2286 mm)
• Min and max widths: 24"W - 36"W (610 mm - 914 mm)
• Min and max depths: 18"D - 36"D (457 mm - 914 mm)
• Powder-coated paint
• 3 colors available: Gray ANSI 61, Hammer Gray RAL7035 and Black
• 4 eye bolts are included with enclosures that are over 24”D (610 mm)
Part
Number
Enclosure Height
in (mm)
Enclosure Width
in (mm)
Enclosure Depth
in (mm)
Matching
Mounting Plate
Matching Drip
Shield Assembly
A09-602418-X00
60 (1520)
24 (610)
A09-722418-X00
72 (1830)
24 (610)
18 (460)
DF0003-602400-X01
DF0016-002400-X01
18 (460)
DF0003-722400-X01
A09-723018-X00
72 (1830)
DF0016-002400-X01
30 (760)
18 (460)
DF0003-723000-X01
A09-723618-X00
DF0017-003000-X01
72 (1830)
36 (910)
18 (460)
DF0003-723600-X01
DF0017-003600-X01
A09-902420-X00
90 (2290)
24 (610)
20 (510)
DF0003-902400-X01
DF0016-002400-X01
A09-903620-X00
90 (2290)
36 (910)
20 (510)
DF0003-903600-X01
DF0017-003600-X01
A09-722424-X00
72 (1830)
24 (610)
24 (610)
DF0003-722400-X01
DF0016-002400-X01
A09-723024-X00
72 (1830)
30 (760)
24 (610)
DF0003-723000-X01
DF0017-003000-X01
A09-603624-X00
60 (1520)
36 (910)
24 (610)
DF0003-603600-X01
DF0017-003600-X01
A09-723624-X00
72 (1830)
36 (910)
24 (610)
DF0003-723600-X01
DF0017-003600-X01
A09-903624-X00
90 (2290)
36 (910)
24 (610)
DF0003-903600-X01
DF0017-003600-X01
A09-723630-X00
72 (1830)
36 (910)
30 (760)
DF0003-723600-X01
DF0017-003600-X01
A09-723636-X00
72 (1830)
36 (910)
36 (910)
DF0003-723600-X01
DF0017-003600-X01
A09-903636-X00
90 (2290)
36 (910)
36 (910)
DF0003-903600-X01
DF0017-003600-X01
P/N AO9-HHWWDD-X00 Dimensions
36.0 [914.4] MAX
18.0 457.2 MIN
.8 19.8
36.0 914.4 MAX
24.0 [609.6] MIN
3.1 77.7
Note: X=color: (-C00) for Black, (-G00) for Hammer Gray RAL 7035, (-H00) for Gray ANSI 61. Size in inches. Other sizes and lock styles
available. Mounting plate (ordered separately) is 12" smaller than height and 4" smaller than width of enclosure. Plate mounts on mounting
channels and symetrically horizontally.
90.0 [2286] MAX
60.0 1524.0 MIN
7.1 179.3
2X 1.6 39.6
Additional Sizes Available Online
Fast, easy
configuration
and ordering.
CPI Product Designer creates unique industrial enclosures quickly and easily by
allowing you to select the size, features and accessories needed for a specific
application. Access this tool at www.chatsworth.com/product-designer.
6
Chatsworth Products
RMR® Free-Standing Enclosures
PRODUCT DATA SHEET
ORDERING INFORMATION
RMR Free-Standing Enclosure, Type 4 and 12, Dual Access with Solid Single Door
NEMA Type 4 and 12 enclosures are for either indoor or outdoor use and protect against dirt, rain, sleet,
snow, splash and hose down with noncorrosive liquids.
• Designed for NEMA Type 4 and 12 applications. Also meets NEMA Type 1, 2, 3, 5 and 3R with drain
hole (hole must be between 1/8" to 1/4" (3 mm - 6 mm)
• Dual access provides additional mounting plate placement and access to either side of the enclosure
• 3 lock styles: keyed CH751, double bit and square
• Latch styles: 3-point mechanism with heavy-duty padlock swinghandle. Auxiliary ¼-turn latches are added
on top and bottom of enclosures that are 30” (762 mm) wide or wider
• Min and max height: 72”H – 90"H (1829 mm - 2286 mm)
• Min and max widths: 24”W – 36"W (610 mm - 914 mm)
• Min and max depths: 24”W – 36"W (610 mm - 914 mm)
• Powder-coated paint
• 3 colors available: Gray ANSI 61, Hammer Gray RAL7035 and Black
• 4 eye bolts are included with enclosures that are over 24”D (610 mm)
Part
Number
Enclosure Height
in (mm)
Enclosure Width
in (mm)
Enclosure Depth
in (mm)
Matching
Mounting Plate
Matching Drip
Shield Assembly
A10-722424-X00
72 (1830)
24 (610)
A10-842424-X00
84 (2130)
24 (610)
24 (610)
DF0004-722400-X01
DF0016-002400-X01
24 (610)
DF0004-842400-X01
A10-803424-X00
80 (2030)
DF0016-002400-X01
34 (860)
24 (610)
DF0004-803400-X01
DF0017-003400-X01
A10-763125-X00
A10-722927-X00
76 (1930)
31 (790)
25 (640)
DF0004-763100-X01
DF0017-003100-X01
72 (1830)
29 (740)
27 (690)
DF0004-722900-X01
DF0016-002900-X01
A10-833528-X00
83 (2110)
35 (890)
28 (710)
DF0004-833500-X01
DF0017-003500-X01
A10-893433-X00
89 (2260)
34 (860)
33 (840)
DF0004-893400-X01
DF0017-003400-X01
A10-853134-X00
85 (2160)
31 (790)
34 (860)
DF0004-853100-X01
DF0017-003100-X01
A10-882735-X00
88 (2240)
27 (690)
35 (890)
DF0004-882700-X01
DF0016-002700-X01
A10-812835-X00
81 (2060)
28 (710)
35 (890)
DF0004-812800-X01
DF0016-002800-X01
A10-802935-X00
80 (2030)
29 (740)
35 (890)
DF0004-802900-X01
DF0016-002900-X01
P/N A10-HHWWDD-X00 Dimensions
36.0 914.4 MAX
24.0 [609.6] MIN
.8 19.8
36.0 914.4 MAX
24.0 [609.6] MIN
Note: X=color: (-C00) for Black, (-G00) for Hammer Gray RAL 7035, (-H00) for Gray ANSI 61. Note: Size in inches. Other sizes and lock styles
available. Mounting plate (ordered separately) is 12" smaller than height and 4" smaller than width of enclosure. Plate mounts on mounting
channels and symetrically horizontally.
3.1 77.7
90.0 [2286] MAX
72.0 1828.8 MIN
7.1 179.3
2X 1.6 39.6
Additional Sizes Available Online
Fast, easy
configuration
and ordering.
CPI Product Designer creates unique industrial enclosures quickly and easily by
allowing you to select the size, features and accessories needed for a specific
application. Access this tool at www.chatsworth.com/product-designer.
7
Chatsworth Products
PRODUCT DATA SHEET
RMR® Free-Standing Enclosures
GENERAL ACCESSORIES
Solid Mounting Plates
Solid Mounting Plates are solid metal panels that are
installed at the rear of the enclosure frame. A variety of
network, automation and control equipment devices can
be installed onto the mounting plate for flexible support
configurations.
RMR Enclosure Grounding and Bonding Kit
The RMR Enclosure Grounding and Bonding Kit adds
additional bonding capacity to the enclosure or to bond the
optional mounting plate to the enclosure.
• Includes jumpers and hardware
• Compatible with RMR Floor-Mount, RMR Free-Standing
and RMR Standard Wall-Mount Enclosures
Refer to enclosure ordering tables for sampling of mounting
plate part numbers. Go to CPI Product Designer for other
enclosure and mounting plate sizes.
RMR Enclosure Threaded Drain Plug Kit
The RMR Enclosure Threaded Drain Plug Kit allows
accumulated or condensed water to drain out the bottom
of the enclosure. The drain plugs vent air out of the
enclosures, helping to equalize air pressure. Install drains
at the bottom of the enclosures.
•Kit includes vent drain and retaining nut
•Compatible with all RMR Enclosures
Part Number
Shipping Weight
lb (kg)
DF0025-000000-001
1 (0.5)
Shipping Weight
lb (kg)
DF0022-000000-001
4 (2.2)
Shipping Weight
lb (kg)
DF0023-000000-001
0.5 (0.2)
RMR Enclosure XL Polyvent Protective Vent Kit
The RMR Enclosure XL Polyvent Protective Vent Kit provides
ventilation and equalizes air pressure in the event of drastic
temperature changes. Pressure equalization is essential
to protect the enclosure seal from damage. Installation
hardware included.
• Kit includes vent and retaining nut
• Compatible with RMR Modular, RMR Swing-Out, RMR
Fixed Wall-Mount, RMR Standard Wall-Mount, RMR
Floor-Mount and RMR Free-Standing Enclosures
Part Number
Shipping Weight
lb (kg)
DF0028-000000-001
0.5 (0.2)
LED Light Kit
The LED Light Kit provides additional lighting inside the
enclosure.
• 2 types available: On-off switch or motion sensor
• Voltage: 100 - 240 V, 50/60 Hz
• NEMA 1-15P power cord
RMR Enclosure Door Stop Kit
The RMR® Enclosure Door Stop Kit secures the door of the
enclosure in the open position. It can be mounted on either
left- or right-hinged doors. Includes mounting hardware.
•Kit includes door stop and mounting hardware
•Compatible with RMR Floor-Mount, RMR Free-Standing
and RMR Standard Wall-Mount Enclosures
Part Number
Part Number
Description
Shipping Weight
lb (kg)
DF0030-000000-001
On-off Switch
0.5 (0.2)
DF0031-000000-001
Motion Sensor
0.5 (0.2)
Part Number
DF0030-000000-001
RMR Enclosure Drip Shield Assembly
Required to meet NEMA Type 3R when using a NEMA Type
12 enclosure. It is used to provide additional protection
against ice and rain.
DF0031-000000-001
Refer to enclosure ordering tables for sampling of Drip
Shield Assembly part numbers. Go to CPI Product Designer
to configure an RMR Enclosure with Drip Shield Assembly.
CPI now offers Extended Limited Warranties on CPI-Branded Electronic products,
available for two additional years beyond the expiration of the Original Warranty
Period (3 years).
Interested in learning more about our RMR Industrial Enclosures? Call us at
800-834-4969, or email Technical Support at techsupport@chatsworth.com.
Contact CPI Customer Service, or visit www.chatsworth.com/warranty for more
information.
While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions
and reserves the right to change information and descriptions of listed services and products.
©2017 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling, eConnect, RMR, MegaFrame,
Saf-T-Grip, SeismicFrame, SlimFrame, TeraFrame, GlobalFrame, CUBE-iT PLUS, Evolution, OnTrac, QuadraRack and Velocity are
federally registered trademarks of Chatsworth Products. Simply Efficient, Secure Array, EuroFrame, Clik-Nut and Motive are
trademarks of Chatsworth Products. All other trademarks belong to their respective companies. Rev.2 05/17 MKT-60020-687