SPECIFICATIONS
BANDIT MODEL 65XP (6" DISC STYLE) BRUSH BANDIT
SPECIFICATION
Capacity: 6"
Measurements
Throat Opening: 6" x 12"
Feed Rate: 80 FPM (1/4" chip)
Noise Level: 80 decibels at 50 feet
(360 degrees around)
Length (with infeed tray 10' 2"
closed):
Dimensions
Length (with infeed tray open): 12' 8"
Width: 5' 7"
Height: 7' 6"
Weight: 2,000 pounds (approximate for gas engines)
3,000 pounds (approximate for diesel engines)
Tongue Weight: 250 pounds (Approximate for gas engines)
300-350 pounds (Approximate for diesel engines)
Engine
Options: 25, 27 and 35 Horsepower gas engines
44.2 and 49.4 Diesel Tier 4i engines
Mount: (2) adjustable mounts are provided to secure belt tension
Drive: Belt drive system/Direct drive, with clutch offered by engine manufacturer
Reversing auto feed control Optional
system:
Frame: 3/16" x 2" x 4"
Chassis
Suspension: 2,200 pound Torflex axle (for gas engines)
3,500 pound Torflex axle (for diesel engines)
Brakes: Standard on 3,500 pound axle
Tires: (2) 20.5 x 8 x 10, load range "D", 8 ply mounted on white solid rims (for gas engines)
(2) P185 x 14 tires Load range "D", 8 ply, mounted on white modular rims (for diesel engines)
Fenders: 10 gauge steel fenders (for gas engines)
3/16" steel fenders (for diesel engines)
Hitch: Single position 2" ball hitch
Safety Chains: 1/4" x 6' safety chain kit with safety hooks and latches
Tongue Jack: 2,000 pound tongue jack with footpad
Top Feed Wheel Jack Mount: Tongue jack can be placed here to raise the top feed wheel for service
Electrical
Battery: 12 volt, Interstate 530 CCA battery
Electrical Plug: Sure flex 12' long coiled cord with 6 prong plug
Taillights: (2) LED stop/turn/taillights
Terminal Junction Box: 7 terminal heavy-duty junction box
Clearance Lights: (4) Side LED clearance lights
License Plate Mount: (1) License plate mount with LED light
Taillight Covers: Optional
Feed System
Type: Pivoting
Down Pressure Springs: 2
Yoke Sides: 3/8" plate steel
Feed Wheels: (1) horizontal
Feed Wheel Dimensions: 10 5/8" diameter x 11 1/2" wide
Feed Wheel Teeth: 5 knife edge and 5 serrated
Feed Wheel End Caps: Toothed to eliminate wrapping around shafts
Number of Hydraulic Motors: 1
Displacement: 24.95
Torque at System Pressure: 7,151 in/lbs
Attachment: Tapered fit coupling system
Infeed Hopper Dimensions: 29" high x 42"
Infeed Thickness: 10 gauge
Infeed Tray: 30" folding infeed tray
Feed Roller to End of Infeed 66"
Table:
Infeed Slope: 3 degrees
Cutting System
Style: Disc
Dimensions: 26" diameter x 3/4" thick
RPM: 1,950 RPM (approximate)
Knife Pockets: 2
Knives: (2) 1/2" x 4" x 7 1/4" dual edge
Knife Bolts: (3) 1/2" grade 8 bolts (per knife)
Thrower: (2) 3" x 4" x 12 1/4" (cupped)
Anvil: 3 bolt, 4 sided anvil (1/2" x 3" x 6")
Chipper Shaft: 2" diameter
Chipper Bearings: (2) 2" Flange mounted greasable bearings (spherical roller type on anvil side)
Chipper Hood: Must fold back, to access knives and disc
Construction
Chipper Base (Front): 1/4"
Chipper Base (Back): 1/4"
Belly Band: 3/16"
Right Throat Side: 3/8"
Left Throat Side: 3/8"
Throat Bottom: 1/4"
Chipper Hood: 10 gauge
Hydraulic System
Type: Open Center
Filtration: 3 Micron return, 100 micron suction
Pump: Casappa (gear style)
Relief Pressure: 2,000 PSI
Hydraulic Hoses: 1/2" & 5/8" single and double braid
Hydraulic Hose Burst 12,000 PSI
Pressure:
Discharge
Swivel: 360 degree manual swivel discharge (tool-less)
Deflector: 12" adjustable chip deflector (4 adjustments are provided)
Hand Crank Swivel Discharge: Optional
Hand Crank Height Discharge: Optional
Fuel Tank
Capacity: 7 gallon plastic fuel tank standard with gas engines
8 gallon steel fuel tank standard with diesel engines
Mount: Rubber Shock Mounted
Magnetic Drain Plug: Included
Rochester Sight Gauge: Optional
Lockable Filler Caps: Optional
Hydraulic Tank
Capacity: 7 gallons
Mount: Rubber Shock Mounted
Magnetic Drain Plug: Included
Rochester Sight Gauge: Optional
Lockable Filler Caps: Optional
Paint
Colors: Choose from: Bandit yellow, Caterpillar yellow, Alert orange, green, black, or white
Battery / Tool Boxes
Battery Box: Plastic battery box
Tool Box: Optional
Safety Features
Safety Features: Guards covering all moving parts
Chipper hood engine disable plug
Disc lock bar
Wooden pusher paddle
Electronic limit switch (prevents engine from being started)
Mech. spring lock pin for hood pin
(2) Last chance pull cables (Patented)
Safety Contr
IMAGE
* Bandit Industries, Inc. reserves the right to modify any and all specifications as it see fit, without notice.