How to install GT1\EasyDIS v44 step-by-step Thanks to randomy @ www.bimmerforums.com PDF created by MaikelK @ www.bimmerforums.com I spent pretty much the entire workday and evening at home yesterday learning what GT1\DIS is, obtaining it, and then figuring out how to install it. It was no easy feat, as I have no access to bmwecu.org, where most of the information seems to be hidden (according to the few bits and pieces of information I could obtain). So I've put the steps I found necessary to install EasyDIS v.44. Credit to bmwecu.org who apparently developed this easy install. вЂў Software Required: o Easy DIS v.44 BASE iso o Easy DIS v.44 Program iso o VMware v.6 o Daemon Tools вЂў NOTE: Follow every direction exactly. When I say to use Daemon Tools, use Daemon Tools. I had some complications when I burned the ISOвЂ™s to CD, and could not activate the Programs disc. I cannot help you with the instructions or install of GT1, this article is the help I have provided. -Randomy вЂў Install VMWare Workstation version 6 using default parameters during setup вЂў Open VMWare and create a new Virtual Machine: вЂў Select Typical вЂў Select Other вЂ“ Other вЂў Name the VM вЂў Select Host Only networking вЂў Enter size of disk as 18.635, and allocate all disk space now вЂў Click Finish and have a smoke while it create the Virtual Disk вЂў The Virtual Machine is created вЂў We need to make some changes. First Remove the Sound Adpater вЂў Adjust Ethernet adapter to use VMnet1 вЂў Switch to the options tab, and uncheck drag and drop from Guest Isolation вЂў Mount вЂњEasyDIS-base-44-v1.0вЂќ in Daemon Tools вЂў Edit the CD drive of your Virtual Machine to use the Daemon Tools drive (F: in this case) вЂў Start the virtual machine and quickly press F2 to enter the BIOS for it вЂў Set the CD-Rom to be the first boot device вЂў вЂў вЂў Save and exit the BIOS. The computer will reboot. The installation of GT1 begins. вЂў The installation ends and you are notifed to eject the CD, and restart the VM, but do not do that yet!!: вЂў Eject the iso from Daemon Tools вЂў Mount the file вЂњGT1_v44_programsвЂќ in Daemon Tools вЂў вЂў Now Shut-Off the Virtual Machine, and Restart it Return to the BIOS by pressing F2 and set the boot order back to default вЂў Save and Exit, and the VM will boot up вЂў The following screen will appear, select your language and Vehicle, press the green arrow to continue вЂў вЂў Select your Country, and Enter 12345 for Dealer Number. The rest of the info you can make-up Once you have entered the required information, click End > Quit вЂў DIS appears!! вЂў Click Administration and note that the CD drive shows DIS v44.00. If it doesnвЂ™t, you may need to try and mount the file вЂњGT1_v44_programsвЂќ from Daemon Tools again вЂў Press Installation under DIS, and enter 12345 (dealer number) as password вЂў Now you wait for a long time вЂў The installation will complete, press OK вЂў Press End > Quit вЂў You can now use diagnostics and coding\programming for your BMW