Need a
license?
or more
flexibility?
How to Install and Secure
eGroupWare
How To Install and Secure eGroupWare
eGroupWare, why
e
?
decide for yourself, we could never pick one!
enterprise, extended, extreme …
groupware
2
How To Install and Secure eGroupWare
The author and publisher have taken care in the preparation of this book, but make no expressed or implied
warranty of any kind and assume no responsibility for errors or omissions. No liability is assumed for incidental or
consequential damages in connection with or arising out of the use of the information or programs contained
herein.
This document is published under the:
Creative Commons Attribution-ShareAlike License
For information on obtaining permissions for use of this material from this work, please submit your request to
Reiner Jung
rjung@expl0it.de
Linux is a trademark from Linus Torvalds
Red Hat, Red Hat Network, RPM are trademarks or reghistered trademarks of RedHat Inc. in the United States and
other countries
SSH and Secure Shell are trademarks from SSH Communication Security Inc.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in United States
and/or other contries
All other trademarks and copyrights referred to are the property of their respective owners
expl0it labs offer packaging and open source security development
expl0it press is responsible for publishing HOWTOs, white papers and more
expl0it consulting offer security consulting in the enterprise
Date published
5-Jan-05
3
How To Install and Secure eGroupWare
Table of Contents
Table of Contents .......................................................................................................................................................................4
1
Introduction .......................................................................................................................................................................8
1.1
What will this book cover?..............................................................................................................................................8
1.2
Who should read it? ........................................................................................................................................................8
1.3
Document convention ...................................................................................................................................................9
1.4
About the author .............................................................................................................................................................9
2
Installation Checklist for eGroupWare ..........................................................................................................................10
3
Express Install HOWTO ....................................................................................................................................................11
4
Migrating Your Installation from phpGroupWare to eGroupWare .............................................................................16
5
Updating eGroupWare ...................................................................................................................................................17
6
5.1
When you should update?.......................................................................................................................................... 17
5.2
Updating the eGroupWare installation..................................................................................................................... 17
5.3
Porting your settings to the new header.inc.php version ...................................................................................... 18
Installation Instructions ...................................................................................................................................................19
6.1
Downloading the packages....................................................................................................................................... 19
6.2
Why are GPG-signed packages and md5sum necessary?.................................................................................. 19
6.2.1
Installing the GPG key for tar.gz.gpg, tar.bz2.gpg and zip.gpg...................................................................... 19
6.2.2
Verifying the GPG key ............................................................................................................................................. 20
6.2.3
Installing the GPG key for the RPM packages .................................................................................................... 21
6.3
How do I validate packages?.................................................................................................................................... 22
6.4
Installing the packages on your server ..................................................................................................................... 23
6.4.1
Installing an unsigned package on your server.................................................................................................. 23
6.4.2
Installing a GPG-signed package on your server .............................................................................................. 23
6.4.3
Install an RPM package on your server................................................................................................................ 24
6.4.4
Rebuilding the packages for other RPM paths................................................................................................... 24
6.4.5
Install with Bitrock installer under Windows .......................................................................................................... 25
6.4.6
Install with Bitrock installer under Linux ................................................................................................................. 25
6.4.6.1
Use a GUI to install eGroupWare.................................................................................................................. 25
6.4.6.2
Use the command line install eGroupWare ............................................................................................... 26
6.4.7
7
Installing from CVS ................................................................................................................................................... 27
Basic Server Security.......................................................................................................................................................28
7.1
Partitioning the filesystem ............................................................................................................................................ 28
7.2
The server platform ....................................................................................................................................................... 28
7.2.1
Checking your server for running services and open ports .............................................................................. 29
7.2.1.1
Ports which the eGroupWare server needs to run .................................................................................... 29
7.2.1.2
The portscanner............................................................................................................................................... 30
7.2.1.3
Output from a portscanner ........................................................................................................................... 30
7.2.1.4
Disabling unneeded services/servers .......................................................................................................... 30
7.2.2
Uninstalling unneeded software on your server.................................................................................................. 31
7.2.3
Check for rootkits on your server ........................................................................................................................... 32
7.2.3.1
Local check for signs of a rootkit with chkrootkit ...................................................................................... 32
4
How To Install and Secure eGroupWare
7.2.3.2
Chkrootkit sample snippet............................................................................................................................. 33
7.2.3.3
Installing the chkrootkit RPM ......................................................................................................................... 33
7.2.3.4
Installing chkrootkit from the tar.gz file........................................................................................................ 34
7.2.4
Secure server administration .................................................................................................................................. 35
7.2.4.1
Connecting to your server over a secure session ..................................................................................... 35
7.2.4.2
Working with SSH Key Pairs............................................................................................................................. 36
7.2.4.2.1
Creating a secure shell key pair ............................................................................................................. 36
7.2.4.2.2
Copying your public key to the server .................................................................................................. 36
7.2.4.2.3
The ssh-add tool......................................................................................................................................... 37
7.2.4.2.4
Securing your SSH client ........................................................................................................................... 37
7.2.4.2.5
Securing your SSHD ................................................................................................................................... 37
7.2.5
Installing software to monitor your server logs .................................................................................................... 37
7.2.6
Intrusion detection environment ........................................................................................................................... 38
7.2.6.1
Installing AIDE................................................................................................................................................... 38
7.2.6.2
The AIDE configuration file aide.conf.......................................................................................................... 39
7.2.6.3
Creating a cronjob file to run AIDE automatically.................................................................................... 41
7.2.6.4
Sample AIDE report......................................................................................................................................... 43
7.2.6.5
Creating a new database after changes .................................................................................................. 44
7.2.7
Daemon security ...................................................................................................................................................... 44
7.2.8
Firewall........................................................................................................................................................................ 45
7.2.8.1
Planing the firewall.......................................................................................................................................... 45
7.2.8.2
How create the firewall rules......................................................................................................................... 45
7.2.8.3
Example firewall script.................................................................................................................................... 46
7.2.8.4
Install the firewall script .................................................................................................................................. 52
7.2.8.5
Firewall logfile analyse ................................................................................................................................... 53
7.3
Web Application Security............................................................................................................................................ 53
7.3.1
Installing ModSecurity.............................................................................................................................................. 54
7.3.2
Basic setup................................................................................................................................................................. 54
7.3.3
Testing ModSecurity ................................................................................................................................................. 55
7.3.4
ModSecurity sample log ......................................................................................................................................... 56
7.4
Optimization and securing of the Apache web server ......................................................................................... 57
7.4.1
Recommended modules to run ............................................................................................................................ 57
7.4.2
Other Apache configuration options................................................................................................................... 58
7.5
eAccelerator ................................................................................................................................................................. 58
7.5.1
Requirements ............................................................................................................................................................ 58
7.5.1.1
RedHat Enterprise Linux 3 pre tasks.............................................................................................................. 58
7.5.2
Compatibility............................................................................................................................................................. 59
7.5.3
Quick install ............................................................................................................................................................... 59
7.5.4
Web interface ........................................................................................................................................................... 61
7.6
Securing the PHP installation....................................................................................................................................... 62
7.7
Creating a web server certificate ............................................................................................................................. 63
7.7.1
Joining CA Cert ........................................................................................................................................................ 64
7.7.2
Creating your certificate signing request ............................................................................................................ 64
5
How To Install and Secure eGroupWare
7.7.2.1
Changing the openssl.cnf file ....................................................................................................................... 64
7.7.2.2
Creating your server key and signing request ........................................................................................... 65
7.7.2.3
Sending the signing request to your CA ..................................................................................................... 66
7.7.2.4
Installing the server certificate...................................................................................................................... 66
7.8
The web server .............................................................................................................................................................. 67
7.9
Secure the SQL server .................................................................................................................................................. 68
7.10
Backup and restore your database! ......................................................................................................................... 69
7.10.1
Decide your backup solution ............................................................................................................................ 69
7.10.2
Backup the MySQL database ........................................................................................................................... 70
7.10.2.1
Manualy backup the MySQL database................................................................................................. 70
7.10.2.2
Backup your MySQL with a daily cronjob .............................................................................................. 70
7.10.2.3
Restore the MySQL database .................................................................................................................. 71
7.10.3
Backup the PostgreSQL database ................................................................................................................... 72
7.10.3.1
Manualy backup the PostgreSQL database......................................................................................... 72
7.10.3.2
Create a cron job for the PostgreSQL srcipt.......................................................................................... 72
PostgreSQL backlup shell script ...................................................................................................................................... 72
7.10.3.3
8
Setup eGroupWare .........................................................................................................................................................74
8.1
9
Restore the PostgreSQL database .......................................................................................................... 73
Creating your database.............................................................................................................................................. 74
8.1.1
Create the MySQL database................................................................................................................................. 74
8.1.2
Create the PostgreSQL database......................................................................................................................... 74
8.2
How to start the setup?................................................................................................................................................ 75
8.3
Checking the eGroupWare installation .................................................................................................................... 76
8.4
Creating your header.inc.php ................................................................................................................................... 76
8.5
Setup / Config Admin .................................................................................................................................................. 77
8.5.1
Step 1 – Simple Application Management - Create your database ............................................................ 78
8.5.2
Step 2 – Configuration............................................................................................................................................. 79
8.5.2.1
Creating the files folder.................................................................................................................................. 79
8.5.2.2
Editing the current configuration ................................................................................................................. 79
8.5.3
Step 3 – Set Up Your User Accounts ...................................................................................................................... 82
8.5.4
Step 4 – Manage Languages................................................................................................................................. 82
8.5.5
Step 5 – Manage Application................................................................................................................................ 82
Log In to eGroupWare ....................................................................................................................................................83
10
Troubleshooting...........................................................................................................................................................84
10.1
Forgot the admin password ........................................................................................................................................ 84
10.2
Admin user or other user is blocked .......................................................................................................................... 84
10.3
Database error: lock(Array, write) failed .................................................................................................................. 84
10.4
Checking file permissions ............................................................................................................................................ 84
10.5
Cannot get past the Check Install page (#1)......................................................................................................... 84
10.6
Cannot get past the Check Install page (#2)......................................................................................................... 85
10.7
Windows: fudforum/3814******9): Permission denied ............................................................................................. 85
10.8
Sitemgr: mkdir(./sitemgr-link): Permission denied .................................................................................................... 85
10.9
Error 1250 (Client does not support authentication protocol requested by server .................................. 86
6
How To Install and Secure eGroupWare
10.10
Create a admin account but can’t login............................................................................................................ 86
10.11
Loop when creating database.............................................................................................................................. 87
10.12
Check with what modules php is compiled...................................................................................................... 87
10.13
mbstring error at install ........................................................................................................................................ 87
10.14
PHP include path error message......................................................................................................................... 87
11
Software Map ..............................................................................................................................................................88
12
Useful Documentation ................................................................................................................................................93
13
Example configuration scripts ...................................................................................................................................93
13.1
AIDE ................................................................................................................................................................................. 93
13.2
Backup............................................................................................................................................................................ 93
13.3
Iptables ........................................................................................................................................................................... 94
14
To-do and Change Log..............................................................................................................................................95
14.1
The to-do list for this document .................................................................................................................................. 95
14.2
Change log for the book ............................................................................................................................................ 96
15
Contributors to this Document ...................................................................................................................................98
16
Humanly-Readable License ......................................................................................................................................99
17
Index ..........................................................................................................................................................................100
7
How To Install and Secure eGroupWare
1
Introduction
eGroupWare is a groupware package programmed in PHP. It is open source software that can be installed on
most operating systems, such as Windows, Mac, Unix, BSD and Linux. It is designed to run alongside your existing
software (such as your database and mail server). The target of eGroupWare is to fulfill the requirements of
enterprise environments in a groupware package while retaining the security and modularity of open source
software. eGroupWare includes all of the applications that are needed to setup a complete office workplace.
The long-term vision of the eGroupWare workplace is that 80 percent of an employee’s business needs can be
satisfied from within the groupware suite.
1.1
What will this book cover?
This book will cover the setup and security steps that should be followed when you install eGroupWare in your
organization. The setup of eGroupWare itself is only a small part of what must be done to have a secure and
available groupware solution – you must also perform such tasks as deciding what your update strategy will be,
planning your firewall setup, and configuring your system to be resistant to intruders. This book also gives a short
overview of some of the differences you may encounter when installing eGroupWare on varied operating
system platforms; however, due to the myriad operating system and software configurations that are possible, it
is by no means comprehensive.
Please consult your system’s documentation or post a question to the
appropriate eGroupWare developer mailing list if you need help.
1.2
Who should read it?
Experienced and inexperienced eGroupWare users alike should read this book. The user must have a certain
degree of comfort using his or her operating system, as this book will not cover operating system basics in any
detail. However, it will give useful hints as to how you can better and more securely set up your operating
system environment. Advanced users will find customizable example scripts (such as for iptables or aide) which
can be modified as desired to suit their requirements.
8
How To Install and Secure eGroupWare
1.3
Document convention
This manual uses different fonts, styles and icons to represent different things. Following are the style conventions
used.
cursive
Cursive text represents command line operations.
script
Fixed-width font denotes the content of configuration or script files.
Wizard icons point you to download areas at http://www.example.com/files. At these places you will find
some example configuration files that you can modify to suit your needs.
Information icons mean that the directory /var/www/html/egrouopware/phpgwapi contain additional
documentation for the current topic (your path may be different).
Note icons are helpful reminders
Warning icons indicate important things you should be aware of
Caution icons denote very important things you absolutely must do!
Penguin icons denote actions you should take on a Linux or Unix operating system.
Windows icons denote actions you should take on a Windows operating system.
1.4
About the author
Reiner Jung has worked as a freelance IT consultant and security project manager for more than 14 years. He has
experience with classical operating systems such as Netware, Windows, and Unix, but recently has preferred to work
with OpenBSD and Linux. In 2004 he founded his own security consulting company, expl0it, based in Europe and
South America.
9
How To Install and Secure eGroupWare
2
Installation Checklist for eGroupWare
This list will give you a short overview of what you need to do to run eGroupWare. You don’t need a compiler to
install eGroupWare. eGroupWare is composed only of PHP, HTML and image files.
What you need to run eGroupWare
You
need
an
operating
system
Example software
like
the
following:
Check the requirements
Linux, Unix, *BSD
MAC
WIN NT / 2000 / XP
eGroupWare requires a web server.
IIS
Here are some examples:
Roxen
Apache 1.3 or 2.0
eGroupWare requires a database:
MYSQL
MS-SQL
PostgreSQL
If you want to send mail with eGroupWare then
Exim
you need an SMTP server such as:
Postfix
Sendmail
If you want to use eGroupWare as a POP or
Cyrus
IMAP mail client you need a corresponding
Courier
server such as:
Dovecot
UW-IMAP
eGroupWare requires PHP:
PHP > 4.1 required.
PHP > 4.2
recommended.
10
How To Install and Secure eGroupWare
3
Express Install HOWTO
This HOWTO will give a short introduction to the steps necessary for setting up eGroupWare. eGroupWare
installations can be done in less than 10 minutes. However, unless installing eGroupWare as quickly as possible is
absolutely necessary, it is recommended you go through this full book to ensure that your system is properly set
up and secured.
1)
Download the eGroupWare packages from the Sourceforge download area1. At the moment
eGroupWare packages are provided at the project page zip, tar.gz, bz2 and rpm formats. Some Linux and
Unix distributions, such as Mandrake, Debian, Gentoo, SUSE and FreeBSD provide customized packages
designed to work with their distribution (for instance, they will correct the installation paths of the packages
and ensure dependencies are met).
2)
Install the packages on your server in the webserver root (recommended) or any other directory you
wish to use. The RPM package from Sourceforge will use /var/www/html as its installation path.
[root@server tmp]# rpm –ivh eGroupWare-x.x.xx.xxx-x.rpm
To install any other kind of package of eGroupWare, copy the package to the web server root directory,
change to that directory, and extract the package.
[root@server tmp]# cd /var/www
[root@server www]#tar xzvf eGroupWare-x.x.xx.xxx-x.tar.gz
Using a program like Winzip2, unzip the file to any folder that is under your web server’s root. In other
words, the folder you choose must be accessible from the Internet. Make sure you keep the existing folder
structure when you extract the zip file (the “keep folder names” option should be checked in WinZip in the
Extract dialog) and your installation will look something like this: D:\websites\yourwebsite\eGroupWare\(all
the files in the eGroupWare zip).
1 http://www.sf.net/projects/egroupware
2 http://www.winzip.com
11
How To Install and Secure eGroupWare
3)
Change the permissions on the files in your eGroupWare installation. Use chown and chmod to do
this (see the man pages of chown and chmod if you need help). Which user and group should own the
files depends upon your particular operating system. Probably you will want to have root be the user
owner and the web server’s group be the group owner. Try using the recursion flags to both of these
commands to make things easier.
- Your admin user should have read and write permissions.
- The user under which your web server runs should have read access only. Your web server user only
needs write permission on the fudforum folder.
Set the proper permissions for the eGroupware files.
The Administrative user needs to have at least read and write permissions.
12
How To Install and Secure eGroupWare
The Web user (Internet Guest Account) needs to have read permission.
The Web user needs read and write permissions for the FUDFORUM only!
4)
Ensure that your web server and database server are started.
5)
Point your browser to the URL http://<your_server_address>/egroupware/setup.
Depending on your web server setup you may be required to add “index.php” to your
list of default documents. You may also be required to add a trailing slash to the URL above.
6)
The check install script should start automatically.
- Wait until the script is finished, then correct any errors that are shown.
- After fixing any errors, reload the page to check your installation again.
- When there are no errors left, scroll down and click “Return to Setup.”
You may have a couple of things that do not resolve completely. For instance, the register_globals =
on setting in your PHP.ini file (Usually under C:\WINNT) may need to be changed. Some scripts require this
to be on and some require it to be off. If you turn it off, other parts of your website that use PHP may not
work. The sure way to find out is to set it the way eGroupWare recommends (off) and check your other
sites. If they no longer work properly, set the value back to on. Please note: eGroupWare does not require
this to be set to off!
Also the MsSQL (Microsoft) database extension will not be loaded if you are using MySQL!
13
How To Install and Secure eGroupWare
When all conflicts are resolved you can click “continue to the Header Admin.”
7)
Start the Header Admin configuration.
- Fill out all of the fields.
Server Root – This is the “root” of your eGroupWare installation, i.e. D:\websites\yourwebsite\eGroupWare.
Include Root – make this the same, i.e. D:\websites\yourwebsite\eGroupWare
(Please note: this is not your .com address or other FQDN, it is the actual directory path to you eGroupWare
installation.)
Don’t forget the password. It will be encrypted and will not be recoverable later
Choose the option to “Download” the header.inc.php file and save it to the root directory of your
eGoupWare installation (example /var/www/html/egroupware). Give the web server the right to read the
file.
Choose the option to “Download” the header.inc.php file that you have just created, and either
save it to the root directory of your eGroupWare installation (if you have access to the server), or upload it
through FTP to that directory.
- Click continue
8)
Login to Setup/Config Admin.
14
How To Install and Secure eGroupWare
9)
Create your Databases / Tables.
- Fill out the form with your database root username and corresponding password to create your
database automatically
- Continue to create the database
- Re-check the installation
- Continue to create the tables
This should be very simply if you know the name and password for your MySQL server. Fill in the
information and “Create Database.”
When you click “Re-check My Installation” you will probably see that you “have no applications installed”
and be given the option to “install the core tables and the admin and preferences applications.” Go
ahead and install those tables.
*Note “TROUBLE SHOOTING” section – if you receive errors.
10) Edit Current Configuration.
- Create a directory outside your web server root and give the weserver user the rights to read, write and
execute in this directory. As an example, when your web server root is /var/www/html, you could create
the folder under /var/www/files
This means to create a folder/directory that is not under your D:\websites\yourwebsite\eGroupWare
directory tree. For example if your “root” installation is at D:\websites\yourwebsite\eGroupWare, you will
want this directory/folder at something like D:\websites\yourwebsite\new_directory.
Once the
directory/folder is created make sure the Web user has permissions to read, write, and execute in this
directory/folder.
11) Create your Admin User.
- Do not use this account as your primary, day-to-day user account. It should be used as a backup user
and for initial setup only
12) Manage Languages.
- Install the languages which you want to use.
13) Manage Applications.
- Uninstall applications which you don’t want to use
14) Login to eGroupWare.
Point your browser to http://yourservername/egroupware
15
How To Install and Secure eGroupWare
4
Migrating Your Installation from phpGroupWare to eGroupWare
Download the necessary packages from our page and install them as described in Section 2.
Copy the
header.inc.php file from your phpGroupWare directory to your eGroupWare directory and edit the following lines in
header.inc.php (your paths may vary slightly):
From:
define('PHPGW_SERVER_ROOT','/var/www/html/phpgroupware');
define('PHPGW_INCLUDE_ROOT','/var/www/html/phpgroupware');
To:
define('PHPGW_SERVER_ROOT','/var/www/html/egroupware');
define('PHPGW_INCLUDE_ROOT','/var/www/html/egroupware');
Point your Browser to the URL
https://www.domain.com/egroupware/setup
Login to Setup/Config Admin Login
Click Edit Current Configuration
and change the content of the third field (Enter the location…) to:
/egroupware
That’s all…have fun!
16
How To Install and Secure eGroupWare
5
Updating eGroupWare
5.1
When you should update?
The eGroupWare project releases the following types of releases: minor bug fix, major bug fix, security and new
version.
You should update immediately whenever any security release is announced.
Security releases are
officially announced when an external security researcher finds a problem and publishes it.
When the development team itself finds a security problem, the fix will be included in the next release but it is not
announced on the mailing lists! This is to protect users who do not read the list very often, as it will be less likely that
malicious user will find the exploit and use it on their own.
If such a flaw is announced on the mailing list it
needlessly provides malicious users with the knowledge to take advantage of the exploit.
You don’t need to update eGroupWare when a release is a minor bug fix if you are not experiencing the symptoms
of the bug. Minor bug fix releases don’t include security fixes, and they normally only solve very specific problems.
A update to eGroupWare when a major bug fix or major version release is announced is generally recommended.
These releases can include unannounced security fixes.
5.2
Updating the eGroupWare installation
Before you start to update your installation, make a backup from your eGroupWare
files and he database.
1)
Download the packages from our sourceforge3 page.
2)
Install the packages on your server:
For RPM packages do the following:
[root@server tmp]# rpm –Uvh eGroupWare*
For tar.gz packages go to your web server’s root directory (above your eGroupWare installation):
[root@server tmp]# cd /var/www/html
[root@server html]# tar xzvf eGroupWare-x.xx.xxx-x.tar.gz
3 http://www.sf.net/projects/egroupware
17
How To Install and Secure eGroupWare
For tar.bz2 packages go to your web server’s root directory (above your eGroupWare installation):
[root@server tmp]# cd /var/www/html
[root@server html]# tar xjvf eGroupWare-x.xx.xxx-x.tar.bz2
It is possible to update from CVS.
Update from CVS ONLY from the stable branch and not from the
development branch!
[root@server tmp]# cd /var/www/html/egroupware
[root@server egroupware]# cvs update –r Version-1_0_0-branch -Pd
3)
Login to Setup/Config Admin.
4)
If necessary, eGroupWare will show you that you have to update your database tables.
5)
Check for necessary updates in Step 4, Advanced Application Management.
5.3
Porting your settings to the new header.inc.php version
1)
After update you will see the follow message:
You need to port your settings to the new header.inc.php version.
2)
Go to https://yourserver/egroupware/setup.
- Scroll down in "Checking the eGroupWare Installation"
- Confirm the check by pressing Continue to go to the Header Admin
3)
Login with the correct username and password.
4)
If necessary, change the settings.
5)
Save the file.
18
How To Install and Secure eGroupWare
6
Installation Instructions
6.1
Downloading the packages
You can download the packages from:
http://sourceforge.net/project/showfiles.php?group_id=78745
We provide the following packages at the Sourceforge download area:
*.tar.gz
*.tar.bz2
*.zip
These packages are signed with a gpg key for security reasons:
*.tar.gz.gpg
*.tar.bz2.gpg
*.zip.gpg
These packages work under Windows and offer a graphical installer:
egroupware*windows-installer.exe
These packages work under Linux and offer a graphical installer under X-Windows:
egroupware*linux-installer.bin
These RPMs work under Red Hat and most RPM-based distributions:
eGroupWare*noarch.rpm
The package eGroupWare-all-apps*.noarch.rpm contains all available packages.
The other packages provide all applications in separate packages.
6.2
Why are GPG-signed packages and md5sum necessary?
Sometimes hackers attack development servers to change the downloadable packages, and include trojan
horses, sniffers, etc. in the packages. The signed packages validate the integrity of the project packages before
you install and run the applications on your server.
6.2.1
Installing the GPG key for tar.gz.gpg, tar.bz2.gpg and zip.gpg
Install the GPG key with which the packages tar.gz.gpg, tar.bz2.gpg, zip.gpg, md5sum-eGroupWareversion.txt.asc and the RPM's are signed.
Under Linux you can use the following command to import the key so that you can validate the packages
tar.gz.gpg, tar.bz2.gpg, zip.gpg and md5sum*.asc.
[root@server root]# gpg --keyserver blackhole.pca.dfn.de --recv-keys 0xD9B2A6F2
19
How To Install and Secure eGroupWare
6.2.2
Verifying the GPG key
If you want to validate packages, you must trust the key. If you don’t do this, you will receive an error that the
key is not trusted every time.
List the available keys in your key ring. You must be able to see the imported key here:
[root@server root]# gpg --list-keys
gpg: Warning: using insecure memory!
gpg: please see http://www.gnupg.org/faq.html for more information
/root/.gnupg/pubring.gpg
-------------------------------pub 1024D/D9B2A6F2 2002-12-22 Reiner Jung <r.jung@creativix.net>
sub 1024g/D08D986C 2002-12-22
Now edit the key with the key number D9B2A6F2
[root@server root]# gpg --edit-key D9B2A6F2
gpg (GnuPG) 1.0.7; Copyright (C) 2002 Free Software Foundation, Inc.
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions. See the file COPYING for details.
gpg: Warning: using insecure memory!
gpg: please see http://www.gnupg.org/faq.html for more information
gpg: checking the trustdb
gpg: no ultimately trusted keys found
pub 1024D/D9B2A6F2 created: 2002-12-22 expires: never
trust: -/-
sub 1024g/D08D986C created: 2002-12-22 expires: never
(1). Reiner Jung <r.jung@creativix.net>
You can (but don’t have to) check the fingerprint of the key. The fingerprint of the key is:
BBFF 354E CA1F 051E 932D 70D5 0CC3 882C D9B2 A6F2
Command> fpr
pub 1024D/D9B2A6F2 2002-12-22 Reiner Jung <r.jung@creativix.net>
Fingerprint: BBFF 354E CA1F 051E 932D 70D5 0CC3 882C D9B2 A6F2
Now you can sign the key
Command>trust
pub 1024D/D9B2A6F2 created: 2002-12-22 expires: never
trust: f/-
sub 1024g/D08D986C created: 2002-12-22 expires: never
(1). Reiner Jung <r.jung@creativix.net>
20
How To Install and Secure eGroupWare
Please decide how far you trust this user to correctly
verify other users' keys (by looking at passports,
checking fingerprints from different sources...)?
1 = Don't know
2 = I do NOT trust
3 = I trust marginally
4 = I trust fully
5 = I trust ultimately
i = please show me more information
m = back to the main menu
Your decision? 5
Do you really want to set this key to ultimate trust? yes
pub 1024D/D9B2A6F2 created: 2002-12-22 expires: never
trust: u/-
sub 1024g/D08D986C created: 2002-12-22 expires: never
(1). Reiner Jung <r.jung@creativix.net>
Please note that the shown key validity is not necessary correct
unless you restart the program.
Now you can check the key at the prompt with “check” or quit the session.
6.2.3
Installing the GPG key for the RPM packages
To import the key needed to validate the RPM packages, search for the key D9B2A6F2 on the
following key server webpage : http://www.dfn-pca.de/eng/pgpkserv/
Click the link “D9B2A6F2.” In the new window copy the full text, including the following lines:
----BEGIN PGP PUBLIC KEY BLOCK--------END PGP PUBLIC KEY BLOCK----Save the copied text to a file with the following name:
EGROUPWARE-GPG-KEY
Then import the key to your RPM key ring:
[user@server tmp]$ rpm --import EGROUPWARE-GPG-KEY
21
How To Install and Secure eGroupWare
6.3
How do I validate packages?
If you want to check the md5sum of a package, perform the following steps (steps shown are for a Linux
system):
Download the md5sum-eGroupWare-version.txt.asc file from the Sourceforge download page.
Validate the file md5sum-eGroupWare-version.txt.asc:
[user@server tmp]$ gpg --verify md5sum-eGroupWare-version.txt.asc
Find out the md5sum of the package:
[user@server tmp]$ md5sum eGroupWare-x.x.xx.xxx-x.tar.gz
41bee8f27d7a04fb1c3db80105a78d03 eGroupWare-x.x.xx.xxx-x.tar.gz
Open the md5sum file to see the original md5sum (the md5sum shown below is an example only):
user@server tmp]$ less md5sum-eGroupWare-x.x.xx.xxx-x.txt.asc
-----BEGIN PGP SIGNED MESSAGE----Hash: SHA1
md5sum from file eGroupWare-x.x.xx.xxx.tar.gz is:
41bee8f27d7a04fb1c3db80105a78d03
- --------------------------------------md5sum from file eGroupWare-x.x.xx.xxx.tar.bz2 is:
3c561e82996349d596540f476b9624f2
- --------------------------------------md5sum from file eGroupWare-x.x.xx.xxx.zip is:
c3bb1f67ca143236e8603c6995e82db0
-----BEGIN PGP SIGNATURE----Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE/WM2wDMOILNmypvIRAm5GAJ0e6IlnellZU0quVQxWOP/pF+QGpwCgptbH
O02LpinLNqnr6epxt9vB9sw=
=OBcn
-----END PGP SIGNATURE----Here we see that the key in the md5sum file and the checksum test from the command line are the
same, so the package was not changed after build.
22
How To Install and Secure eGroupWare
To check the checksum from the tar.gz.gpg, tar.bz2.gpg or zip.gpg packages, type the following on the
command line of your Linux system:
[user@server tmp]$ gpg --verify eGroupWare-x.x.xx.xxx-x.tar.gz.gpg
To check the checksum of the RPM package, type the following on the command line of your Linux system:
[user@server tmp]$ rpm --checksig eGroupWare-all-apps-x.x.xx.xxx-x.noarch.rpm
6.4
6.4.1
Installing the packages on your server
Installing an unsigned package on your server
To install an unsigned, non-RPM package, perform the following steps:
Change to your web server’s document root (or wherever you want install the packages)
[user@server tmp]$ cd /var/www/html
Extract the package into this folder. If you have your package in the /tmp directory, you can install it with one
of the following commands, depending on which package you have:
[user@server tmp]$ tar xzvf /tmp/eGroupWare-x.xx.xxx-x.tar.gz
[user@server tmp]$ tar xjvf /tmp/eGroupWare-x.xx.xxx-x.tar.bz2
[user@server tmp]$ unzip /tmp/eGroupWare-x.xx.xxx-x.zip
6.4.2
Installing a GPG-signed package on your server
To install a GPG-signed, non-RPM package, perform the following steps:
Detach your package from the GPG key:
[user@server tmp]$ gpg -o eGroupWare-X.XX.XXX-X.tar.gz -decrypt
eGroupWare-X.XX.XXX-X.tar.gz.gpg
Change to your web server’s document root (or wherever you want to install the packages)
[user@server tmp]$ cd /var/www/html
23
How To Install and Secure eGroupWare
Extract the package into this folder. If you have your package in the /tmp directory, you can install it with one
of the following commands, depending on which package you have:
[user@server html]$ tar xzvf /tmp/eGroupWare-x.x.xxx-x.tar.gz
[user@server tmp]$ tar xjvf /tmp/eGroupWare-x.xx.xxx-x.tar.bz2
[user@server tmp]$ unzip /tmp/eGroupWare-x.xx.xxx-x.zip
6.4.3
Install an RPM package on your server
To install a RPM package on your server, perform the following steps:
Check that the RPM is valid:
[user@server tmp]$ rpm --checksig /tmp/eGroupWare-x.x.xxx-x.noarch.rpm
Install the package:
[user@server tmp]$ rpm -ivh /tmp/eGroupWare-all-apps-x.x.xxx-x.noarch.rpm
If your web server root is not /var/www/html/ you can install the RPM to another path.
To do this, use the following command.
[user@server tmp]$ rpm -ivh –prefix /your_new_server/eGroupWare-all-apps-x.x.xxx-x.noarch.rpm
6.4.4
Rebuilding the packages for other RPM paths
You can rebuild the RPM packages for SUSE LINUX. Download the file *.src.rpm and type
[user@server tmp]$ rpmbuild -–rebuild eGroupWare-x.xx.xxx-x.src.rpm
This will create a package with install path “/srv/www/htdocs” for you.
The package will be located for installation in /usr/src/packages/RPMS/noarch.
24
How To Install and Secure eGroupWare
6.4.5
Install with Bitrock installer under Windows
The installation with the graphical installer is very simple and can be done in 6 steps.
Klick the Windows installer executable to start the installation.
Select your language.
Click forward in the welcome screen.
You must accept the license agreement and click forward.
Choose the installation directory for your eGroupWare installation, as example f:\webapp
When the installation is done, you can view the Readme or finish the installation process.
6.4.6
Install with Bitrock installer under Linux
Bitrock installer can run under X-Windows or from a command line.
6.4.6.1 Use a GUI to install eGroupWare
Open a terminal window in your window manager to start the installer.
Change to the folder where you have downloaded the package, make the package executable
and start the installation process.
[user@server tmp]$ chmod 700 egroupware-x-linux-installer.bin
[user@server tmp]$ ./egroupware-x-linux-installer.bin
25
How To Install and Secure eGroupWare
The installation with the graphical installer is very simple and can be done in 7 steps.
Select your preferred language
Click forward in the welcome screen.
You must accept the license agreement and klick forward.
You can change the installation directory from /var/www/html to a other directory
When the installation is done, you can view the Readme or finish the installation process.
The Readme file includes some important information and is recommended reading.
6.4.6.2 Use the command line install eGroupWare
The installation process from the command line is nearly the same as from the GUI.
You must make the
package executable and execute the binary package. You will be see the same prompts as under the GUI
installer
---------------------------------------------------------------------------Welcome to the eGroupWare Setup Wizard
---------------------------------------------------------------------------Please read the following License Agreement. You must accept the terms of this
agreement before continuing with the installation.
Press [Enter] to continue :
The eGroupWare software is distributed under the Terms of
GPL and LGPL.
It is free of Charge
Redistribution is allowed.
Do you accept this license? [Y/n]: n
26
How To Install and Secure eGroupWare
6.4.7
Installing from CVS
To install the packages from the CVS repository, perform the following steps:
Change to your web server’s document root (or wherever you want to install the packages):
:
[root@server tmp]# cd /var/www/html
[root@server html]# cvs –d:pserver:anonymous@cvs.sourceforge.net:
/cvsroot/egroupware login
[root@server html]# cvs –z3 –d:pserver:anonymous@cvs.sourceforge.net:
/cvsroot/egroupware co egroupware
(The above should be all on one line, i.e. you should have …sourceforge.net:/cvsroot/eg…)
[root@server html]# cd egroupware
[root@server egroupware]# cvs co all
[root@server egroupware]# cvs update –Pd
A good introduction covering CVS usage in Open Source Development can found in the book
Open Source Development with CVS4
4 http://cvsbook.red-bean.com/OSDevWithCVS_3E.pdf
27
How To Install and Secure eGroupWare
7
Basic Server Security
7.1
Partitioning the filesystem
A standard *nix installation often consists of only 2 partitions, /boot and /. This is a security and availability risk for
your server. There are several different exploits and attacks available where a hacker can, for instance, use the
/tmp file system to compile an exploit or run a symlink attack, or an attacker can shut down your server by
flooding the hard drive with logs or mails. To be prepared again these kinds of attacks you should select a
partitioning scheme that uses more then 2 partitions.
A good partition scheme should have an /etc/fstab file that looks like the following example:
LABEL=/
/
ext3
defaults
11
LABEL=/boot
/boot
ext3
defaults
12
LABEL=/home
/home
ext3
defaults
12
LABEL=/opt
/opt
ext3
defaults
12
LABEL=/usr
/usr
ext3
defaults
12
LABEL=/var
/var
ext3
defaults
12
LABEL=/var/www/files
/var/www/files
ext3
defaults
12
LABEL=/var/log
/var/log
ext3
defaults
12
LABEL=/var/mail
/var/mail
ext3
defaults
12
LABEL=/tmp
/tmp
ext2
auto,noexec,nosuid,rw
/dev/hda11
swap
swap defaults
12
00
If you also host “normal” user accounts on the same server, use the mount options usrquota and
grpquota. This prevents users from filling the home directories to capacity
7.2
The server platform
There are many ways you can secure your server platform. The most important security measure you can
perform
is
to
keep
your
installation
up-to-date.
Consider
subscribing
to
the
egroupware-
announcement@lists.sourceforge.net mailing list. This is where we publish new releases as well as necessary
security updates for eGroupWare.
28
How To Install and Secure eGroupWare
7.2.1
Checking your server for running services and open ports
An open port indicates that your server is offering a service to the public. This could be a Fileserver, DNS
Server, Telnet server, X server or one of many other services. More open ports provide an attacker with
more ways that an exploit can gain access to your running services to gain control. You server should only have
the ports open and services available which are necessary to run eGroupWare. If you need other open ports
that are not necessary for eGroupWare, then you should secure your installation with a firewall or with TCP
wrappers. If it’s possible, only allow services to run on your eGroupWare server that have Secure Socket Layer
(SSL) enabled.
7.2.1.1 Ports which the eGroupWare server needs to run
Ports which are needed are:
Web server Port:
HTTP/80
Web server SSL Port:
HTTPS/443
Remote Administration, Secure Shell:
SSH/22
If you must run an E-Mail server on the same machine, then you will need a few more ports open. If you can run
your E-Mail server on a separate machine, then please do so. You’ll need these extra ports open for an E-Mail
server to run:
Email Server MTA:
SMTP/25
Email Server MTA:
SMTPS/465
To pick up the E-Mail from your server with a client program (such as the eGroupWare clients), you need a POP3
or IMAP daemon which will require at least one of following ports open:
IMAP server:
IMAP/143
IMAP server SSL:
IMAPS/993
POP-3:
POP-3/110
POP-3 over SSL:
POP-3/995
If you block ports with a firewall, please remember that you will need to allow certain outbound traffic. This can
include NTP, DNS lookups, etc.
Conclusion:
Minimum necessary open ports (non-SSL):
22, 80, 443
Maximum necessary open ports (including E-Mail server):
22, 25, 80, 110, 143, 443, 465, 993, 995
Recommended minimum (SSL only, no E-Mail server):
22, 443
Recommended maximum (SSL only, E-Mail server):
22, 25, 443, 993, 995
29
How To Install and Secure eGroupWare
7.2.1.2 The portscanner
There are several tools available that will allow you to check your installation for open ports. One that is
available under both *NIX and Windows is Nmap, which can be found at: http://www.insecure.org/nmap.
Install Nmap on your machine and check your server for open ports.
7.2.1.3 Output from a portscanner
Here is example output from a Nmap scan against a server. Nmap shows you the ports which are open to
connect to on this server.
[root@server root]# nmap -sV yourserver.com
Starting nmap 3.45 ( http://www.insecure.org/nmap/ ) at 2003-09-17 00:48 CEST
Interesting ports on xxx.xxx.xx.xxx:
(The 1651 ports scanned but not shown below are in state: closed)
PORT
STATE
SERVICE
VERSION
22/tcp open
ssh
OpenSSH 3.1p1 (protocol 2.0)
80/tcp open
http
Apache httpd 1.3.27 ((Unix) (Red-Hat/Linux) mod_ssl/2.8.12
OpenSSL/0.9.6b PHP/4.1.2 mod_perl/1.26)
137/tcp filtered netbios-ns
138/tcp filtered netbios-dgm
139/tcp filtered netbios-ssn
443/tcp open
ssl
OpenSSL
Nmap run completed -- 1 IP address (1 host up) scanned in 23.000 seconds
7.2.1.4 Disabling unneeded services/servers
If Nmap found services running on your server that you do not need, stop them. After you restart the service
should not automatically start again.
On a Red Hat installation you can use the following commands to stop and disable a service:
[root@server home]# service name_from_the_service stop
[root@server home]# chkconfig –level 345 name_from_the_service off
On a Debian-based installation you can use the following tools:
Server:~# /etc/init.d/ name_from_the_service stop
Server:~# rcconf
30
How To Install and Secure eGroupWare
On a SUSE-based installation you can use the following commands:
Server:~# /etc/init.d/name_from_the_service stop
Server:~# chkconfig name_from_the_service off
7.2.2
Uninstalling unneeded software on your server
Most operating system distributions by default install a lot of software which is not necessary. For security reasons
you should delete this software from your server. Unneeded software often includes things like ftp clients and
wget. If you are not going to be compiling anything from source, you should also remove gcc, header files, and
source files.
To check what packages are installed on a RPM-based Linux distribution, do the following:
[root@server home]# for i in `rpm –qa`; do rpm –qi $i >> rpm_packages; done
[root@server home]# less rpm_packages
Delete all packages which you don’t need:
[root@server home]# rpm –e package
To check what packages are installed on a Debian-based Linux, Debian offers many tools. In example;
Server:~# aptitude
31
How To Install and Secure eGroupWare
7.2.3
Check for rootkits on your server
For Linux/*nix there are two nice open source products on the market to detect rootkits.
It is strongly
recommended that you install a rootkit checker on your server. You can choose between chkrootkit5 and
rootkit hunter6.
7.2.3.1 Local check for signs of a rootkit with chkrootkit
Chkrootkit is a tool to locally check for signs of a rootkit. Chkrootkit has been tested on: Linux 2.0.x, 2.2.x and
2.4.x, FreeBSD 2.2.x, 3.x, 4.x and 5.x, OpenBSD 2.x and 3.x., NetBSD 1.5.2, Solaris 2.5.1, 2.6 and 8.0, HP-UX 11, True64
and BSDI. It contains:
•
chkrootkit: A shell script that checks your system binaries for rootkit modification. The following
are checked:
aliens asp bindshell lkm rexedcs sniffer wted w55808 scalper slapper z2 amd basename
biff chfn chsh cron date du dirname echo egrep env find fingerd gpm grep hdparm su
ifconfig inetd inetdconf init identd killall ldsopreload login ls lsof mail mingetty netstat
named passwd pidof pop2 pop3 ps pstree rpcinfo rlogind rshd slogin sendmail sshd
syslogd tar tcpd tcpdump top telnetd timed traceroute vdir w write
•
ifpromisc.c: checks if the network interface is in promiscuous mode.
•
chklastlog.c: checks for lastlog deletions.
•
chkwtmp.c: checks for wtmp deletions.
•
check_wtmpx.c: checks for wtmpx deletions. (Solaris only)
•
chkproc.c: checks for signs of LKM trojans.
•
chkdirs.c: checks for signs of LKM trojans.
•
strings.c: quick and dirty strings replacement
You can download chkrootkit as a compiled RPM package or as a tar.gz package by clicking one of the
following links (hold Ctrl as you click):
chkrootkit.tar.gz 7
chkrootkit RPM 8
5 http://www.chkrootkit.org
6 http://www.rootkit.nl
7 http://www.chkrootkit.org
8 http://www.expl0it.de/rpms/security/chkrootkit/
32
How To Install and Secure eGroupWare
7.2.3.2 Chkrootkit sample snippet
Checking `timed'... not found
Checking `traceroute'... not infected
Checking `vdir'... not infected
Checking `w'... not infected
Checking `write'... not infected
Checking `aliens'... no suspect files
Searching for sniffer's logs, it may take a while... nothing found
Searching for HiDrootkit's default dir... nothing found
Searching for t0rn's default files and dirs... nothing found
Searching for t0rn's v8 defaults... nothing found
Searching for Lion Worm default files and dirs... nothing found
Searching for RSHA's default files and dir... nothing found
Searching for RH-Sharpe's default files... nothing found
Searching for Ambient's rootkit (ark) default files and dirs... nothing found
7.2.3.3 Installing the chkrootkit RPM
The chkrootkit RPM should run with all RPM-based distributions.
Download it from the address above and install it as follows:
[root@server tmp]# rpm –ivh chkrootkit-x.xx-x.i386.rpm
After installation, you can modify the chkrootkit_cronfile to better suit your needs. This step is not necessary, but
makes your report more unique.
[root@server tmp]# vi /etc/cron.daily/chkrootkit_cronfile
#!/bin/sh
cd /usr/bin ./chkrootkit 2> /dev/null | mail –s “chkrootkit output” root
Change the following values:
“chkrootkit output” to “chkrootkit myserver output” root
to
your_email_adress@yourserver.com
33
How To Install and Secure eGroupWare
7.2.3.4 Installing chkrootkit from the tar.gz file
Unpack and install Chkrootkit
[root@server tmp]# cp chkrootkit.tar.gz /usr/local; rm chkrootkit.tar.gz
[root@server tpm]# cd /usr/local/
[root@server local]# tar xzvf chkrootkit.tar.gz
[root@server local]# mv chkrootkit-x.xx chkrootkit
[root@server local]# chown –R root.root chkrootkit
[root@server chkrootkit]# cd chkrootkit
[root@server chkrootkit]# make sense
To make chkrootkit send you the report you have two possibilities: create a chkrootkit_cronfile or add a line to
the crontab file.
To create a chkrootkit_cronfile:
[root@server cron.daily]# vi chkrootkit_cronfile
#!/bin/sh
cd /usr/local/chkrootkit ./chkrootkit 2> /dev/null | mail –s “chkrootkit
myserver output” your_email_adress
Alternatively, extend the crontab file with the following line:
0 1 * * *
s
root
(cd /usr/local/chkrootkit; ./chkrootkit 2>&1 | mail –
"chkrootkit output" your_email_adress)
Now chkrootkit will send you a report to the address above.
34
How To Install and Secure eGroupWare
7.2.4
Secure server administration
If you want to administrate your server securely, use SSH (secure shell). With SSH, all connections are encrypted,
whereas with protocols like telnet and ftp, the user accounts and passwords are transmitted unencrypted (in clear
text format). The transfer of the passwords and account information is easy for an attacker to sniff if it is in clear text.
With the sniffed passwords, a hacker can login to your account.
If possible, use only SSHv2 connections and never use SSHv1 connections. SSHv1 has a known flaw that can
allow the encrypted information to be deciphered by an attacker. Also, don’t use your root account to log
in to the remote server.
Connect to the remote server with a normal user account and use su or sudo for
administration tasks on the server.
7.2.4.1 Connecting to your server over a secure session
If your server supports SHH connections, then it is easy to administrate it remotely. You only have to connect to
the server with you SSH client.
The first time you connect to any particular server with SSH, you will receive a warning like the
following. You must agree to the warning with yes to continue to log in to the server.
[user@client home]$ ssh yourserver
The authenticity of host 'yourserver (100.178.76.207)' can't be established.
RSA key fingerprint is 7e:8e:55:8b:49:57:5d:41:40:ab:93:64:18:af:60:ea.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'yourserver' (RSA) to the list of known hosts.
Connect to your server for remote administration:
[user@client home]$ ssh yourserver
Copy files to your server with secure copy (scp):
[user@client home]$ scp yourfile.txt yourserver:/home/
You can also use sftp to work with a “secure ftp client”:
[user@client home]$ sftp yourserver
In some installations, the sftp function is disabled by default (for example, in some versions of
Debian). If you want enable it, you must add the following line to your sshd_config on your
server.
35
How To Install and Secure eGroupWare
On a Debian system add the following line:
subsystem sftp /usr/lib/sftp-server
On a RedHat system add the following line:
subsystem sftp /usr/libexec/openssh/sftp-server
7.2.4.2 Working with SSH Key Pairs
Using SSH Key Pairs has two advantages. The first is that you don’t need to type your password every time you
connect to the server, and the second is that it is more secure. When you use key pairs you can permit the
usage of authenticating with a different password than that of your account on the server.
You need a separate key pair for every user you want to connect to the server with.
7.2.4.2.1 Creating a secure shell key pair
You must create the ssh key pair on the client side as follows:
[user@client home]$ ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /user/.ssh/id_dsa.
Your public key has been saved in /user/.ssh/id_dsa.pub.
The key fingerprint is:
f0:00:f7:95:e9:73:37:11:aa:e8:06:3e:60:9e:0d:25 user@yourserver
7.2.4.2.2 Copying your public key to the server
You must copy your new public key (*.pub) from your local client to the server:
[user@client home]$ scp .ssh/id_dsa.pub useratserver@yourserver:/home/yoursername/
Install the public key on your server:
[user@client home]$ ssh yourserver
[user@server home]$ cat id_dsa.pub >> .ssh/authorized_keys
[user@client home]$ chmod 600 .ssh/authoritzed_keys
Now, if you connect to the server, the server asks you for the password which you typed when you created
the SSH key pair. If you don’t want type it every time when you connect to the server, you can use ssh-add.
36
How To Install and Secure eGroupWare
7.2.4.2.3
The ssh-add tool
If you connect to your server (or different servers) frequently, you can use the ssh-add tool to store the
password from your ssh key. Then you can just type your password once and it is stored for you permanently:
[user@client home]$ ssh-add
Enter passphrase for /home/youruser/.ssh/id.dsa:
Identify added: /home/youruser/.ssh/id.dsa (/home/youruser/.ssh/id.dsa)
7.2.4.2.4
Securing your SSH client
There is one important line in the configuration file from the SSH client. The make sure the following
line exists in your ssh_config file:
Protocol 2
This allows your clients connections with the version 2 of the SSH protocol only.
7.2.4.2.5
Securing your SSHD
For your SSH daemon you can use the following values to make it more secure:
Protocol 2
PermitRootLogin no
PubKeyAuthentication yes
PasswordAuthentication no
PermitEmptyPassword no
7.2.5
Installing software to monitor your server logs
Analyzing your log files is a must for every administrator. When you don’t monitor your log files, you have no
chance of seeing security problems or anomalies. There are several products on the market that can help you
to monitor your log files:
logcheck 9
logwatch 10
logsurfer 11
Logcheck is recommended. Logcheck will work under Linux, BSD, Sun, and HP-UX. It is easy to install and make
clear reports. To install logcheck type the following from the logcheck root after you have un-tared the file:
[root@server logcheck-1.1.1]# make linux
9 http://sourceforge.net/project/showfiles.php?group_id=80573&release_id=161261
10 http://www2.logwatch.org:81/tabs/download/
11 http://www.cert.dfn.de/eng/logsurf/
37
How To Install and Secure eGroupWare
To run it automatically, you must add a line to your crontab file. Under RedHat, it is /etc/crontab. Open the file
(you may have to open it by typing in “crontab –e”) and add the following line:
00 * * * * root /bin/sh /usr/local/etc/logcheck.sh
Edit the logcheck shell script to add the recipient to the log report. The recipient is the value of the SYSADMIN
variable in the script.
[root@egroupware logcheck-1.1.1]# vi /usr/local/etc/logcheck.sh
To receive more detailed reports, advanced users can also edit the following files:
logcheck.violations
logcheck.violations.ignore
logcheck.hacking
logcheck.ignore
7.2.6
Intrusion detection environment
Install an intrusion detection environment to keep check of your system files’ integrity and to detect changes on
your server.
There are several solutions available for *nix based systems. Osiris work under *nix and Windows.
AIDE 12
Osiris13
Tripwire 14
Samhain 15
From the software above, AIDE is the easiest to set up.
7.2.6.1 Installing AIDE
Most distributions have AIDE included and you can install it with a standard tool like RPM or apt-get. AIDE
depends on the mhash package, which you must install as well.
When no package is available for your
platform, you must compile it yourself with
./configure
make
make install
12 http://sourceforge.net/projects/aide/
13 http://osiris.shmoo.com
14 http://www.tripwire.org/
15 http://www.samhain-labs.org/
38
How To Install and Secure eGroupWare
7.2.6.2 The AIDE configuration file aide.conf
You must configure the aide.conf file so that all important files from your server are checked and to reduce false
alarms.
Store /etc/aide.conf, /usr/sbin/aide and /var/lib/aide/aide.db.gz in a secure location, e.g. on separate
read-only media (such as CD-ROM). Alternatively, keep MD5 fingerprints or GPG signatures of those files
in a secure location, so you have a means to verify that nobody has modified these files.
# Example configuration file for AIDE.
@@define DBDIR /var/lib/aide
# The location of the database to be read.
database=file:/mnt/floppy/aide.db.gz
# The location of the database to be written.
database_out=file:@@{DBDIR}/aide.db.new.gz
# Whether to gzip the output to the database
gzip_dbout=yes
# Default.
verbose=5
report_url=file:/var/log/aide.log
report_url=stdout
# These are the default rules.
#
#p:
permissions
#i:
inode:
#n:
number of links
#u:
user
#g:
group
#s:
size
#b:
block count
#m:
mtime
#a:
atime
#c:
ctime
#S:
check for growing size
#md5:
md5 checksum
#sha1:
sha1 checksum
#rmd160: rmd160 checksum
#tiger:
tiger checksum
#haval:
haval checksum
39
How To Install and Secure eGroupWare
#gost:
gost checksum
#crc32:
crc32 checksum
#R:
p+i+n+u+g+s+m+c+md5
#L:
p+i+n+u+g
#E:
Empty group
#>:
Growing logfile p+u+g+i+n+S
# You can create custom rules like this.
NORMAL = R+b+sha1
DIR = p+i+n+u+g
# Next decide what directories/files you want in the database.
/boot
NORMAL
/bin
NORMAL
/sbin
NORMAL
/lib
NORMAL
/opt
NORMAL
/usr
NORMAL
/root
NORMAL
# Check only permissions, inode, user and group for /etc, but
# cover some important files closely.
/etc
p+i+u+g
!/etc/mtab
/etc/exports
NORMAL
/etc/fstab
NORMAL
/etc/passwd
NORMAL
/etc/group
NORMAL
/etc/gshadow
NORMAL
/etc/shadow
NORMAL
Run "aide --init" to build the initial database.
[root@server root]# /mnt/floppy/aide –init
Copy /var/lib/aide/aide.db.new.gz to the secure location
[root@server root]# cp /var/lib/aide/aide.db.new.gz /mnt/floppy/var/lib/aide/aide.db.gz
Check your system for inconsistencies with the AIDE database. Prior to running a check manually, ensure that
the AIDE binary and database have not been modified without your knowledge.
[root@server root]# /mnt/floppy/aide --check
40
How To Install and Secure eGroupWare
7.2.6.3 Creating a cronjob file to run AIDE automatically
This file is included in the Debian AIDE package, so if you have installed AIDE from a deb package you don’t
need to create this file yourself. The file shown below is an example file which has been modified for RedHat /
Fedora Linux. When you want create a cron file for another distribution, you will probably need to change the
paths.
#!/bin/sh
PATH="/bin:/usr/sbin:/usr/bin"
LOGFILE="/var/log/aide.log"
CONFFILE="/etc/aide.conf"
ERRORLOG="/var/log/error.log"
[ -f /usr/sbin/aide ] || exit 0
MAILTO=”yourusername”
DATABASE=`grep "^database=file:/" $CONFFILE | head -1 | cut -d: -f2`
LINES=”1000”
FQDN=`hostname -f`
DATE=`date +"at %X on %x"`
[ -z "$MAILTO" ] && MAILTO="root"
if [ ! -f $DATABASE ]; then
(
echo "Fatal error: The AIDE database does not exist!"
echo "This may mean you haven't created it, or it may mean that
someone has removed it."
) | /bin/mail -s "Daily AIDE report for $FQDN" $MAILTO
exit 0
fi
aide --check >$LOGFILE 2>$ERRORLOG
(cat << EOF;
This is an automated report generated by the Advanced Intrusion Detection
Environment on $FQDN ${DATE}.
EOF
if [ -s $LOGFILE ]; then
loglines=`wc -l $LOGFILE | awk '{ print $1 }'`
if [ ${loglines:=0} -gt $LINES ]; then
echo
echo "TRUNCATED (!) output of the daily AIDE run:"
41
How To Install and Secure eGroupWare
echo
"Output
is
$loglines
lines,
truncated
to
$LINES."
head -$LINES $LOGFILE
echo "The full output can be found in $LOGFILE."
else
echo "Output of the daily AIDE run:"
cat $LOGFILE
fi
else
echo "AIDE detected no changes."
fi
if [ -s $ERRORLOG ]; then
errorlines=`wc -l $ERRORLOG | awk '{ print $1 }'`
if [ ${errorlines:=0} -gt $LINES ]; then
echo "TRUNCATED (!) output of errors produced:"
echo "Error output is $errorlines lines, truncated
to $LINES."
head -$LINES $ERRORLOG
echo "The full output can be found in $ERRORLOG."
else
echo "Errors produced:"
cat $ERRORLOG
fi
else
echo "AIDE produced no errors."
fi
) | /bin/mail -s "Daily AIDE report for $FQDN" $MAILTO
It is not recommended that you run automated AIDE check without verifying AIDE yourself frequently. In
addition to that, AIDE does not implement any password or encryption protection for its own files.
42
How To Install and Secure eGroupWare
7.2.6.4 Sample AIDE report
The report which AIDE creates shows you all changes on your file system. Please compare the report with the
changes you have made (i.e. installing an update or changing the configuration of your server).
This is an automated report generated by the Advanced Intrusion Detection
Environment on egroupware at 05:27:16 PM on 02/14/2004.
Output of the daily AIDE run:
AIDE found differences between database and filesystem!!
Start timestamp: 2004-02-14 17:27:16
Summary:
Total number of files=34691,added files=2,removed files=0,changed files=5
Added files:
added:/etc/cron.daily/aide
added:/var/log/error.log
Changed files:
changed:/etc/aide.conf
changed:/root
changed:/root/.viminfo
changed:/root/.bash_history
changed:/root/chkrootkit-0.44-1.i386.rpm
Detailed information about changes:
File: /etc/aide.conf
Inode
: 89090
, 89173
Directory: /root
Mtime
: 2004-02-14 16:35:58
, 2004-02-14 17:27:12
Ctime
: 2004-02-14 16:35:58
, 2004-02-14 17:27:12
File: /root/.viminfo
Size
: 6683
, 6513
Mtime
: 2004-02-14 16:35:58
, 2004-02-14 17:27:12
Ctime
: 2004-02-14 16:35:58
, 2004-02-14 17:27:12
Inode
: 111362
, 111363
MD5
: UM0erzXMWPEdiCgKV/t91g==
, l9E0UBQu7PKTCJiS3b2Fzw==
SHA1
: jNlzWrSY/Q4zk3Rd7dnpyth2a0Y=
, R1wFnTg2scWSaRnn47zcZ+syS3E=
File: /root/.bash_history
Size
: 14824
, 14872
Mtime
: 2004-02-14 16:16:30
, 2004-02-14 16:48:32
Ctime
: 2004-02-14 16:16:30
, 2004-02-14 16:48:32
43
How To Install and Secure eGroupWare
MD5
: zlVCx+39n8XLd3/ip757vA==
, nCs18yzJdwDD/BfsUssuhQ==
SHA1
: Al8brD3i+B6P2RMxpn6IaC+I5fE=
, bWBEjLA0Hnt6XXTszkzKi8gaTZQ=
File: /root/chkrootkit-0.43-1.i386.rpm
Permissions: -rw-r--r--
, -rw-r-----
Ctime
, 2004-02-14 16:51:06
: 2004-01-26 13:43:35
AIDE produced no errors.
7.2.6.5 Creating a new database after changes
After your report is verified you must create a new database and save the database at the secure location.
Run the update from your database after every report which you have verified!
[root@server root]# /mnt/floppy/aide --init
[root@server root]# cp /var/lib/aide/aide.db.new.gz /mnt/floppy/var/lib/aide/aide.db.gz
7.2.7
Daemon security
Run your necessary daemons in a chroot environment under *nix.
Use TCP Wrappers or xinetd to secure your daemons.
44
How To Install and Secure eGroupWare
7.2.8
Firewall
Activate a firewall on your eGroupWare server to protect your installation. Some ports must be open but with a
firewall (using, for instance, IPTABLES), you can protect your system again spoofing, ping flooding, and various
other attacks.
7.2.8.1 Planing the firewall
The first thing you should do is decide which services you need. The ports used by these services will need to be
allowed in your firewall script. Create a simple table in which you fill the services which must run. We do it here
for an example eGroupWare installation
Protocol
Port
Description
HTTP
80
This protocoll we need to connect to eGW
HTTPS
443
Same as above
SMTP
25
Run a internal Mailserver and must send mail
SMTPS
465
Same as above
IMAP
143
We allow only connetions to external IMAP
IMAPS
993
We allow only connetions to external IMAPS
POP3
995
We allow only connetions to external POP3
DNS
53
We allow only connetions to external POP3S
SSH
22
We must have console access
NTP
37
Network Time Protokoll, for server time
CVS
2401
We want update our eGW with CVS
RedHat
Network
443
We use RedHat Network
Ingoing
Outgoing
7.2.8.2 How create the firewall rules
There are many possibilities for creating a rule set for your IPTABLES-based firewall. Many people use a simple
editor to create firewall rules or type them directly on the command line. I personally use VIM to write firewall
rules; others use ed, mc, joe, or emacs.
Shown here are two other solutions that can be used to create a firewall rule set. Many more are available, and
can easily be found by searching on the Internet.
One of the other methods for creating an iptables-based firewall rule set is to use shorewall 16.
The Shoreline Firewall, more commonly known as "Shorewall", is a high-level tool for configuring Netfilter. You
describe your firewall/gateway requirements using entries in a set of configuration files. Shorewall reads those
configuration files and with the help of the iptables utility Shorewall configures Netfilter to match your
16 http://www.shorewall.net/
45
How To Install and Secure eGroupWare
requirements.
When you prefer to use a graphical tool to write your rulesets, then you can use firewall builder 17.
Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of
policy compilers for various firewall platforms.
Firewall Builder uses object-oriented approach, which helps
administrators maintain a database of network objects and allows policy editing using simple drag-and-drop
operations.
7.2.8.3 Example firewall script
Based on the information in the table we designed in section 7.2.8.1, a working firewall script for a
RedHat/Fedora server is shown below.
You must set the value for your OWN_IP_ADDRESS in this script ! Don’t forget this or you will be blocked !
#!/bin/sh
IPTABLES="/sbin/iptables"
MODPROBE="/sbin/modprobe"
NETWORK_DEVICE="eth0"
OWN_IP_ADDR="SET_YOUR_IP_ADDRESS_HERE"
LOOPBACK="lo"
THE_SOURCEFORGE_CVS_SERVER_IP_ADDRESS="66.35.250.207"
IMAP_SERVER_ADDRESS_EXTERN="x.x.x.x"
POP_SERVER_ADDRESS="x.x.x.x"
NTP_SERVER_1_ADDRESS=`cat /etc/ntp.conf | grep ^server | cut -d " " -f 2
| head -n 1`
17 http://www.fwbuilder.org/
46
How To Install and Secure eGroupWare
NTP_SERVER_2_ADDRESS=`cat /etc/ntp.conf | grep ^server | cut -d " " -f 2
| tail -n 1`
REDHAT_NETWORK_IP_ADDRESS="209.132.177.100"
PRIVAT_PORTS="1:1023"
NON_PRIVAT_PORTS="1024:65535"
$MODPROBE ip_tables
# Ignore ping to broadcast address
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
# Deactivate source routing
for i in /proc/sys/net/ipv4/conf/*/accept_source_route; do
echo 0 > $i
done
# Enable TCP-SYN cookies
echo 1 > /proc/sys/net/ipv4/tcp_syncookies
# Drop ICMP-redirect
for i in /proc/sys/net/ipv4/conf/*/accept_redirects; do
echo 0 > $i
done
# Don't send ICMP-redirects
for i in /proc/sys/net/ipv4/conf/*/send_redirects; do
echo 0 > $i
done
# Log packages with not possible addresses
for i in /proc/sys/net/ipv4/conf/*/log_martians; do
echo 1 > $i
done
# Ignore packages when response should send over other interface
for i in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 > $i
done
# Delete all existing chains
$IPTABLES --flush
$IPTABLES -t nat --flush
$IPTABLES -t mangle --flush
47
How To Install and Secure eGroupWare
# Loopback Device
$IPTABLES -A INPUT -i $LOOPBACK -j ACCEPT
$IPTABLES -A OUTPUT -o $LOOPBACK -j ACCEPT
# As standard policy, we drop all packages
$IPTABLES --policy INPUT DROP
$IPTABLES --policy OUTPUT DROP
$IPTABLES --policy FORWARD DROP
# Delete User Chains
$IPTABLES --delete-chain
$IPTABLES -t nat --delete-chain
$IPTABLES -t mangle --delete-chain
# accept packets that belong to sessions that have previously been proven
ok:
$IPTABLES -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A INPUT -m state --state INVALID -j LOG --log-prefix
"INVALID input: "
$IPTABLES -A INPUT -m state --state INVALID -j DROP
$IPTABLES -A OUTPUT -m state --state INVALID -j LOG --log-prefix
"INVALID output: "
$IPTABLES -A OUTPUT -m state --state INVALID -j DROP
# SCAN PROTECTION for the server
# ALL BITS DELETED
$IPTABLES -A INPUT -p TCP --tcp-flags ALL NONE -j DROP
# SYN and FIN set together
$IPTABLES -A INPUT -p TCP --tcp-flags SYN,FIN SYN,FIN -j DROP
# SYN and RST set together
$IPTABLES -A INPUT -p TCP --tcp-flags SYN,RST SYN,RST -j DROP
# FIN and RST set together
$IPTABLES -A INPUT -p TCP --tcp-flags FIN,RST FIN,RST -j DROP
# FIN and no needed ACK
$IPTABLES -A INPUT -p TCP --tcp-flags ACK,FIN FIN -j DROP
48
How To Install and Secure eGroupWare
# PSH and no needed ACK
$IPTABLES -A INPUT -p TCP --tcp-flags ACK,PSH PSH -j DROP
# URG and no needed ACK
$IPTABLES -A INPUT -p TCP --tcp-flags ACK,URG URG -j DROP
# ICMP Controll and Status Messages
# Log and Drop icmp fragmentet packages
$IPTABLES -A INPUT -i $NETWORK_DEVICE --fragment \
-p icmp -m limit --limit 2/s
$IPTABLES -A INPUT --fragment -p icmp -j DROP
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p icmp --icmp-type \
source-quench -d $OWN_IP_ADDR -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p icmp \
-s $OWN_IP_ADDR --icmp-type source-quench -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p icmp --icmp-type \
parameter-problem -d $OWN_IP_ADDR -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p icmp -s $OWN_IP_ADDR \
--icmp-type parameter-problem -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p icmp --icmp-type \
destination-unreachable -d $OWN_IP_ADDR -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p icmp -s $OWN_IP_ADDR \
--icmp-type destination-unreachable -j DROP
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p icmp -s $OWN_IP_ADDR \
--icmp-type fragmentation-needed -j ACCEPT
# Allow traceroute to our server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p icmp \
--icmp-type time-exceeded -d $OWN_IP_ADDR -j ACCEPT
# Allow ping to our server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p icmp \
--icmp-type echo-request -d $OWN_IP_ADDR \
-m limit --limit 1/s -j ACCEPT
49
How To Install and Secure eGroupWare
# Allow ping from our server to a other destination
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p icmp \
-s $OWN_IP_ADDR --icmp-type echo-request -j ACCEPT
# HTTP server
$IPTABLES -A INPUT -i $NETWORK_DEVICE
-p TCP \
--dport http --sport $NON_PRIVAT_PORTS \
-m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport https \
-m state --state NEW -j ACCEPT
# We need outgooing http for news feeds and comics
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport http \
-m state --state NEW -j ACCEPT
# SMTP Server
$IPTABLES -A INPUT -i $NETWORK_DEVICE
-p TCP \
--dport smtp -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--dport smtps -m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP --dport smtp \
-m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP --dport smtps \
-m state --state NEW -j ACCEPT
# IMAP Server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport imap \
-m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport imaps \
-m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS -d
$IMAP_SERVER_ADDRESS_EXTERN --dport \
50
How To Install and Secure eGroupWare
imap -m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS \
-d $IMAP_SERVER_ADDRESS_EXTERN \
--dport imaps -m state --state NEW -j ACCEPT
# POP Server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport pop3 \
-m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport pop3s \
-m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS \
-d $POP_SERVER_ADDRESS --dport pop3 \
-m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS \
-d $POP_SERVER_ADDRESS --dport pop3s \
-m state --state NEW -j ACCEPT
# DNS Server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--dport domain -m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p UDP \
--dport domain -m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p TCP \
--sport $NON_PRIVAT_PORTS --dport domain \
-m state --state NEW -j ACCEPT
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p UDP \
--sport $NON_PRIVAT_PORTS --dport domain \
-m state --state NEW -j ACCEPT
# NTP Server
for NTP_SERVER in $NTP_SERVER_1_ADDRESS $NTP_SERVER_2_ADDRESS ; do
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE -p UDP \
-d $NTP_SERVER --dport timeserver \
-m state --state NEW -j ACCEPT
51
How To Install and Secure eGroupWare
done
# SSH Server
$IPTABLES -A INPUT -i $NETWORK_DEVICE -p TCP \
--dport ssh -m state --state NEW -j ACCEPT
# RedHat Network
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE \
-p TCP --sport $NON_PRIVAT_PORTS \
-d $REDHAT_NETWORK_IP_ADDRESS --dport https \
-m state --state NEW -j ACCEPT
# CVS Server
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE \
-p TCP --sport $NON_PRIVAT_PORTS –d\
$THE_SOURCEFORGE_CVS_SERVER_IP_ADDRESS \
--dport cvspserver -m state --state NEW -j ACCEPT
# Log all other INPUT traffic
$IPTABLES -A INPUT -i $NETWORK_DEVICE \
-m limit --limit 2/s -j LOG --log-level info
# Log all other OUTPUT traffic
$IPTABLES -A OUTPUT -o $NETWORK_DEVICE \
-m limit --limit 2/s -j LOG --log-level info
7.2.8.4 Install the firewall script
When you have written your firewall script, you must upload it to the server (using scp or sftp, for example).
Copy the firewall script (under RedHat) to the following folder and set the rights.
[root@server tmp]# cp egroupware_iptables.sh /etc/sysconfig/
[root@server tmp]# chown root.root /etc/syconfig/egroupware_iptables.sh
[root@server tmp]# chmod 500 /etc/syconfig/egroupware_iptables.sh
Now you can start your IPTABLES script. Check that the rules are loaded and test it.
[root@server tmp]# /etc/syconfig/egroupware_iptables.sh
[root@server tmp]# iptables –L
Chain INPUT (policy DROP)
target
ACCEPT
prot opt source
all -- anywhere
destination
anywhere
52
How To Install and Secure eGroupWare
ACCEPT
all -- anywhere
anywhere
state RELATED,ESTABLISHED
DROP
all -- anywhere
anywhere
state INVALID
DROP
tcp -- anywhere
anywhere
tcp flags:FIN,SYN,RS T,PSH,ACK,URG/NONE
DROP
tcp -- anywhere
anywhere
tcp flags:FIN,SYN/FI N,SYN
DROP
tcp -- anywhere
anywhere
tcp flags:SYN,RST/SY N,RST
<<<--- SNIP ----- SNIP --->>>
ACCEPT
tcp -- anywhere
anywhere
tcp spts:1024:65535 dpt:http state NEW
ACCEPT
tcp -- anywhere
anywhere
tcp spts:1024:65535 dpt:https state NEW
ACCEPT
tcp -- anywhere
anywhere
tcp dpt:ssh state NE W
When the script is working, you can save the loaded firewall rules with the following command:
[root@server tmp]# iptables save
7.2.8.5 Firewall logfile analyse
It is easy to activate logging on a firewall when you don’t use a tool to analyze the firewall logs. However, It is
not possible to receive alarms or warnings from your firewall “in time” when you audit the files by hand.
One tool that automatically analyzes your firewall logs is fwlogwatch
18.
Fwlogwatch is an open source
firewall/IDS log analyzer and interactive real-time attack detection and response tool.
7.3
Web Application Security
With web application security software you can secure your web-based applications like eGroupWare from
SQL injection, Cross Side Scripting and other attacks. There are several applications on the market for the Apache
and IIS web servers. Two tools which are open source are:
ModSecurity 19(for Apache Web server 1.3x and 2.x)
IISShield 20(For Internet Information Server)
ModSecurity is an open source intrusion detection and prevention engine for web applications. It operates
embedded into the web server, acting as a powerful umbrella – shielding applications from attacks.
ModSecurity supports Apache 1.3x and Apache 2.x.
18 http://fwlogwatch.inside-security.de/
19 http://www.modsecurity.org/
20 http://www.kodeit.org/products/iisshield/default.html
53
How To Install and Secure eGroupWare
7.3.1
Installing ModSecurity
Unpack the mod_security source archive::
[root@server tmp]# tar xzvf mod_security-x.x.x.tar.gz
Change to the mod_security directory:
[root@server tmp]# cd mod_security-x.x.x/apache2
You can compile the module as an Apache DSO (Dynamic Shared Object) module or statically into the web
server. If you compile it statically, you must also recompile Apache. This may yield a slight performance gain, but
in general it is not significant. The following example shows only how to compile ModSecurity as a DSO module:
[root@server apache2]# apxs -cia mod_security.c
Under Redhat, add the follow line to your httpd.conf file under the section where the modules are loaded:
[root@server mod_security-1.7.4]# vi /etc/httpd/conf/httpd.conf
Include /etc/httpd/conf.d/mod_security.conf
You must restart your Apache web server to activate ModSecurity:
[root@server mod_security-1.7.4]# apachectl stop
[root@server mod_security-1.7.4]# apachectl start
7.3.2
Basic setup
ModSecurity has some included sample setup files to help you with its configuration. You can also convert Snort
rules to use them inside ModSecurity. Sample Snort rules can found on the project server or you can convert them
yourself.
.
<IfModule mod_security.c>
# Turn the filtering engine On or Off
SecFilterEngine On
# Make sure that URL encoding is valid
SecFilterCheckURLEncoding On
# The audit engine works independently and
# can be turned On of Off on the per-server or
# on the per-directory basis.
"On" will log everything,
# "DynamicOrRelevant" will log dynamic requests or violations,
# and "RelevantOnly" will only log policy violations
SecAuditEngine RelevantOnly
# The name of the audit log file
SecAuditLog logs/audit_log
54
How To Install and Secure eGroupWare
SecFilterDebugLog logs/modsec_debug_log
SecFilterDebugLevel 0
# Should mod_security inspect POST payloads
SecFilterScanPOST On
# Action to take by default
SecFilterDefaultAction "deny,log,status:500"
# Prevent path traversal (..) attacks
SecFilter "\.\./"
# Weaker XSS protection but allows common HTML tags
SecFilter "<[[:space:]]*script"
# Very crude filters to prevent SQL injection attacks
SecFilter "delete[[:space:]]+from"
SecFilter "insert[[:space:]]+into"
SecFilter "select.+from"
# Require HTTP_USER_AGENT and HTTP_HOST headers
SecFilterSelective "HTTP_USER_AGENT|HTTP_HOST" "^$"
</IfModule>
Take care! The configuration of ModSecurity depends on the other modules you’re using. You must finetune your configuration when you receive errors. Only use the filters that are needed for your server. For
instance, when you run a Linux-based server, you don’t need to test or use the Windows rules.
7.3.3
Testing ModSecurity
You can run a quick test of the functionality of ModSecurity. Change to the test directory in ModSecurity and run
some of the example tests:
[root@server tests]# ./run-test.pl yourIpAdress 09-directory-traversal-in-parameters.test
11-xss-attack.test 13-sql-injection.test
Test "09 Directory traversal in parameters": Failed (status = 406)
Test "11 XSS attack": Failed (status = 406)
Test "13 SQL injection": Failed (status = 406)
55
How To Install and Secure eGroupWare
7.3.4
ModSecurity sample log
This is an example log from the tests above:
Request: xxx.xxx.xxx.xxx - - [[21/Feb/2004:20:40:29 +0100]] "GET
/cgi-bin/modsec-test.pl?p=../../tmp/file.txt HTTP/1.0" 406 352
Handler: cgi-script
---------------------------------------GET /cgi-bin/modsec-test.pl?p=../../tmp/file.txt HTTP/1.0
Host: xxx.xxx.xxx.xxx :80
User-Agent: mod_security regression test utility
Connection: Close
mod_security-message: Access denied with code 406. Pattern match "\.\./"
at THE_REQUEST.
mod_security-action: 406
HTTP/1.0 406 Not Acceptable
Content-Length: 352
Connection: close
Content-Type: text/html; charset=iso-8859-1
========================================
Request: xxx.xxx.xxx.xxx - - [[21/Feb/2004:20:40:29 +0100]] "GET
/cgi-bin/modsec-test.pl?p=<script>alert('Bang!')</script> HTTP/1.0" 406
352
Handler: cgi-script
---------------------------------------GET /cgi-bin/modsec-test.pl?p=<script>alert('Bang!')</script> HTTP/1.0
Host: xxx.xxx.xxx.xxx:80
User-Agent: mod_security regression test utility
Connection: Close
mod_security-message: Access denied with code 406. Pattern match "<(
|\n)*script" at THE_REQUEST.
mod_security-action: 406
HTTP/1.0 406 Not Acceptable
Content-Length: 352
Connection: close
Content-Type: text/html; charset=iso-8859-1
========================================
Request: xxx.xxx.xxx.xxx - - [[21/Feb/2004:20:40:29 +0100]] "GET
/cgi-bin/modsec-test.pl?p=DELETE%20FRoM+users HTTP/1.0" 406 352
Handler: cgi-script
---------------------------------------GET /cgi-bin/modsec-test.pl?p=DELETE%20FRoM+users HTTP/1.0
56
How To Install and Secure eGroupWare
Host: xxx.xxx.xxx.xxx
User-Agent: mod_security regression test utility
Connection: Close
mod_security-message: Access denied with code 406. Pattern match
"delete[[:space:]]+from" at THE_REQUEST.
mod_security-action: 406
HTTP/1.0 406 Not Acceptable
Content-Length: 352
Connection: close
Content-Type: text/html; charset=iso-8859-1
7.4
Optimization and securing of the Apache web server
To secure your web server you should disable all unneeded modules. Activate only what you need to run your
web applications. Running Apache with fewer modules will also improve its performance.
7.4.1
Recommended modules to run
The following is a short overview of what you need to run Apache 2 with eGroupWare. All other modules can
and should be disabled.
Optimization of the Apache web server is not for novices! When you disable some modules in your
httpd.conf you must also comment out some other options. It is strongly recommended that for each
module you are removing, you disable it, stop Apache, and start Apache again, and do this one module at a
time! Ensure that you receive no error messages each time.
mod_access.so
mod_auth.so
mod_include.so
mod_log_config.so
mod_expires.so
mod_deflate.so
mod_headers.so
mod_unique_id.so
mod_setenvif.so
mod_mime.so
mod_negotiation.so
mod_dir.so
mod_alias.so
57
How To Install and Secure eGroupWare
7.4.2
Other Apache configuration options
You can hide information about your Apache web server for security reasons. There are different possibilities for
Apache 1.3 and Apache 2.x.
The ServerTokens variable in your httpd.conf file should have the value OS, and the ExtendedStatus variable should
be set to OFF. ServerSignature should be set to OFF, the manual directory /var/www/manual to Deny from all.
When you don’t need cgi-bin disable it. The AddHandler for type-map INCLUDES, send-as comment out with a #
symbol at the beginning of the line. Under /var/www/error set Order deny,allow to Deny from all. The /serverstatus and /server-info directories should never be publicly readable for security reasons.
7.5
eAccelerator
eAccelerator is a free open source PHP accelerator, optimizer, encoder and dynamic content cache for PHP. It
increases performance of PHP scripts by caching them in compiled state, so that the overhead of compiling is
almost completely eliminated. Also it uses some optimizations to speed up execution of PHP scripts. eAccelerator
typically reduces server load and increases the speed of your PHP code by 1-10 times.
For more information about eAccelerator visit the developer homepage 21.
7.5.1
Requirements
phpize is needed to build the configure script. Check the availability of phpize with search or locate. On Fedora
Linux you must install php-devel to compile eAccelerator.
RedHat Enterprise Linux 3 is shipped without the phpize package. You must recompile the PHP package
and build two devel packages.
7.5.1.1 RedHat Enterprise Linux 3 pre tasks
To build the PHP devel package you need the following packages.
bzip2-devel curl-devel db4-devel expat-devel freetype-devel gd-devel gdbm-devel gmp-devel pspelldevel httpd-devel libjpeg-devel, libpng-devel pam-devel libstdc++-devel libxml2-devel ncurses-devel
openssl-devel zlib-devel pcre-devel imap-devel
The packages pcre-devel and imap-devel are not offered from RedHat and you must build them yourself.
Download the srpm to your server, copy them to /usr/src/redhat/SRPMS, and build the devel packages:
[root@server SRPM]#rpmbuild –rebuild pcre-x.x-xx.src.rpm
[root@server SRPM]#rpmbuild –rebuild imap-x.x-xx.src.rpm
Change to the RPM directory and install the needed devel RPMs on your server:
[root@server SRPM]#cd /usr/src/redhat/RPM/i386
[root@server i386]#rpm –ivh pcre-devel-x.x-xx.i386 imap-devel-xxxxx-x.rpm
Install the PHP src RPM on your server and change to the SPEC directory
[root@server SRPM]#cd /usr/src/redhat/SPEC
21 http://sourceforge.net/projects/eaccelerator/
58
How To Install and Secure eGroupWare
You must now edit the php.spec file with vi or vim
After Line 55 add the following lines to the file:
%package devel
Group: Development/Libraries
Summary: Files needed for building PHP extensions.
%description devel
The php-devel package contains the files needed for building PHP
extensions.
If you need to compile your own PHP extensions, you will
need to install this package.
Change the following line from:
$RPM_BUILD_ROOT%{_bindir}/{phptar,pearize,php-config,phpextdist,phpize}
To:
$RPM_BUILD_ROOT%{_bindir}/{phptar,pearize}
Delete this line:
rm -rf $RPM_BUILD_ROOT%{_includedir} \
$RPM_BUILD_ROOT%{_libdir}/php
Add this block after the first %files section:
%files devel
%defattr(-,root,root)
%{_bindir}/php-config
%{_bindir}/phpize
%{_bindir}/phpextdist
%{_includedir}/php
%{_libdir}/php
Save the file, and build the new package
[root@server SPECS]# rpmbuild –bb php.spec
Install ONLY the php-devel package on your server!
7.5.2
Compatibility
This version of the eAccelerator has been successfully tested on PHP 4.1.0-4.3.2 under RedHat Linux 7.0, 7.3, and 8.0;
RedHat ES and AS; and Windows with Apache 1.3 and 2.0.
7.5.3
Quick install
Compiling eAccelerator:
export PHP_PREFIX=”/usr”
$PHP_PREFIX/bin/phpize
./configure –enable-mmcache=shared –with-php-config=$PHP_PREFIX/bin/php-config
make
59
How To Install and Secure eGroupWare
You must specify the real prefix where PHP is installed in the "export" command. It may be "/usr" "/usr/local",
or something else.
Installing eAccelerator:
make install
Configuring eAccelerator:
eAccelerator can be installed as either a Zend or PHP extension. You will need to edit your php.ini file
(usually /etc/php.ini)
To install as a Zend extension:
zend_extension=”/usr/lib/php4/eaccelerator.so”
eaccelerator.shm_size=“16“
eaccelerator.cache_dir=“/tmp/eaccelerator“
eaccelerator.enable=“1“
eaccelerator.optimizer=“1“
eaccelerator.check_mtime=“1“
eaccelerator.debug=”0”
eaccelerator.filter=””
eaccelerator.shm_max=”0”
eaccelerator _ttl=”0”
eaccelerator.shm_prune_period=”0”
eaccelerator.shm_only=”0”
eaccelerator.compress=”1”
If you use a thread-safe build of PHP you must use “zend_extensions_ts” instead of “zend_extension”
To install as a PHP extension:
extension=”eaccelerator.so”
eaccelerator.shm_size=“16“
eaccelerator.cache_dir=“/tmp/eaccelerator“
eaccelerator.enable=“1“
eaccelerator.optimizer=“1“
eaccelerator.check_mtime=“1“
eaccelerator.debug=”0”
eaccelerator.filter=””
eaccelerator.shm_max=”0”
eaccelerator _ttl=”0”
eaccelerator.shm_prune_period=”0”
eaccelerator.shm_only=”0”
eaccelerator.compress=”1”
eaccelerator.content
Creating the cache directory:
mkdir /tmp(mmcache
chmod 0777 /tmp/eaccelerator
60
How To Install and Secure eGroupWare
7.5.4
Web interface
eAccelerator can be managed through the web interface script eaccelerator.php, so you’ll need to put this file on
your web site. For security reasons it is recommended to restrict the usage of this script to your local IP.
Since version 2.3.18 the admin interface may be protected by a password. To generate a password run the
eaccelerator_password.php file from a command line and follow the instructions.
Create the eAccelerator password:
[root@server eaccelerator***]# php –q eaccelerator_password.php
Changing password for eAccelerator Web Interface (eaccelerato.php)
Enter admin name: cacheadminname
New admin password: yourpassword
Retype new admin password: yourpassword
Add the following lines into your php.ini and restart HTTPD
eaccelerato.admin.name="cacheadminname"
eaccelerato.admin.password="$1$0ScD9gkb$nOEmFerNMvQ576hELeLrG0"
61
How To Install and Secure eGroupWare
7.6
Securing the PHP installation
Secure your web server directories so they are only visible by your web server user.
;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;
; open_basedir, if set, limits all file operations
; to the defined directory
; and below.
This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
open_basedir =
var/www/html:/var/www/files:/tmp:/usr/share/pear:/usr/bin/crontab
; Decides whether PHP may expose the fact that it is installed on the
server e.g. by adding its signature to the Web server header).
; It is no security threat in any way, but it makes it possible to
; determine whether you use PHP on your server or not.
expose_php = Off
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
max_execution_time = 30 ; Maximum execution time of each script,
inseconds
memory_limit = 24M ; Maximum amount of memory a script may consume (8MB)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Print out errors (as a part of the output).
For production web sites,
; you're strongly encouraged to turn this feature off, and use error
; logging instead (see below).
Keeping display_errors enabled on a
; production web site may reveal security information to end users, such
; as file paths on your Web server, your database schema or other
; information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.
It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
62
How To Install and Secure eGroupWare
; Log errors into a log file (server-specific log, stderr,
; or erro_ log (below)) As stated above, you're strongly advised to use
error logging in place ; of error displaying on production web sites.
log_errors = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog
;;;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;;;
register_globals = OFF
It is more secure to set the paths for session.save_path and upload_tmp_dir in your php.ini file and
include them in the open basedir restrictions.
7.7
Creating a web server certificate
To protect your privacy, you can use a server certificate when you connect to your eGroupWare installation.
With a certificate you can connect to your web server with an encrypted connection (using https instead of
http). Without an https connection, other people can sniff your password or other personal information.
You have a few possibilities when creating a web server certificate:
1.) Create your own certificate authority and self-sign your server certificate.
(Trust is low)
2.) Use a non-Profit Certificate Authority.
CAcert 22
(Trust is high)
3.) Use a commercial Certificate Authority.
Thawte 23
Verisign 24
(Trust is high)
If you want to use a commercial Certificate Authority, please go directly to create your server key and
22 https://www.cacert.org
23 http://www.thawte.com
24 http://www.verisign.com
63
How To Install and Secure eGroupWare
signing request
7.7.1
Joining CA Cert
The first step to receiving a server certificate is joining CAcert.
Open your browser and go to the following URL: https://www.cacert.org.
Follow the link on the left side to join CAcert.
Proceed with enrollment.
Fill out all the necessary information to receive your personal account at CAcert.
After you have submitted your password, you will receive more instructions via Email.
7.7.2
Creating your certificate signing request
On your server installation you must create a server key and a certificate signing request.
7.7.2.1 Changing the openssl.cnf file
You will need to make changes in the openssl.cnf file only if you want use the certificate from the nonprofit Certificate Authority (CAcert). Under Debian Linux you will find the file under /usr/lib/ssl/ and for
Red Hat the path is /usr/share/ssl/
Please check that your openssl.cnf looks like the following snippet. The important lines here are the lines which
are commented out or the change in the stateOrProvinceName value.
[root@server ssl]# vi openssl.cnf
# For the CA policy
[ policy_match ]
countryName
= match
stateOrProvinceName
= optional
organizationName
= match
organizationalUnitName
= optional
commonName
= supplied
emailAddress
= optional
[ req_distinguished_name ]
countryName
= Country Name (2 letter code)
countryName_default
= GB
countryName_min
= 2
countryName_max
= 2
stateOrProvinceName
= State or Province Name (full name)
localityName
= Locality Name (eg, city)
0.organizationName
= Organization Name (eg, company)
organizationalUnitName
= Organizational Unit Name (eg, section)
64
How To Install and Secure eGroupWare
7.7.2.2 Creating your server key and signing request
To get a certificate, you must create a server key and a server certificate signing request.
1.) Create a server key. The server key is stored under Debian in the folder /etc/ssl/certs/ and under
Red Hat in /etc/httpd/conf/ssl.csr/
The following command creates a server key which is password protected. If you have no console
access to your server, DON’T create a password protected key. Your server will wait for a password on
boot and will not start until you provide the password. If you have console access, use the password protected
key! It is more secure.
[root@server ssl]# /usr/bin/openssl genrsa -des3 1024 > /etc/httpd/conf/ssl.key/server.key
Generating RSA private key, 1024 bit long modulus
.......++++++
................................................................++++++
e is 65537 (0x10001)
Enter PEM pass phrase:
To create a key which is not password protected:
[root@server ssl]# /usr/bin/openssl genrsa 1024 > /etc/httpd/conf/ssl.key/server.key
Change the access rights for your key:
[root@server ssl]# chmod go-rwx /etc/httpd/conf/ssl.key/server.key
2.) Now you must create your certificate signing request. Please remember to change the paths to
your server paths for the keys.
[root@server ssl]# /usr/bin/openssl req -new -key /etc/httpd/conf/ssl.key/server.key
-out /etc/httpd/conf/ssl.csr/server.csr
Using configuration from /usr/share/ssl/openssl.cnf
Enter PEM pass phrase:
65
How To Install and Secure eGroupWare
The system asks you for the password, which you gave when you created the key. If you created a key without
password protection, a password isn’t needed.
You are about to be asked to enter information that will be incorporated
into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
----Country Name (2 letter code) [GB]:DE
State or Province Name (full name) []:
Locality Name (eg, city) [Newbury]:
Organization Name (eg, company) [My Company Ltd]:egroupware.org
Organizational Unit Name (eg, section) []:
Common Name (your name or server's hostname) []:egroupware.org
Email Address []:yourname@yourdomain.org
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
In your folder, you will find a new file named server.csr. This file has to be sent to your certificate authority.
7.7.2.3 Sending the signing request to your CA
The certificate signing request has to be sent to the certificate authority. Here we send it to CAcert.
1.
Open your Browser and go to the following URL. https://www.cacert.org.
2.
Follow the link Server Certificate -> Login.
3.
Add a new domain.
4.
Confirm the email that is sent to you.
5.
Follow the link Certificates -> Requests.
6.
Copy the whole content of your server.csr file into the text field.
7.
Agree with the process.
7.7.2.4 Installing the server certificate.
After submitting your CSR, you will receive an email from your CA with your signed certificate. The whole body
of the Email has to be copied to a file name server.crt on your server.
After saving the file, you need to restart your web server.
66
How To Install and Secure eGroupWare
7.8
The web server
Secure your web server directories, so they are only visible by your web server user.
[root@server html]# chown -R root:webserveruser egroupware
[root@server html]# find egroupware -type d -exec chmod 550 {} \;
[root@server html]# find egroupware -type f -exec chmod 440 {} \;
We strongly recommend securing your Apache directory. Please add the following lines to your httpd.conf:
<Directory /var/www/html/egroupware>
<Files ~ "\.(inc.php|tpl)$">
Order allow,deny
Deny from all
</Files>
</Directory>
67
How To Install and Secure eGroupWare
7.9
Secure the SQL server
MySQL
Be sure that your database runs and automatically starts when your server boot
When you set up your MySQL server for the first time, don't forget to set the MySQL server root
password. The password in a standard installation is EMPTY. When you don’t set up a root
password for your MySQL server, every user with shell access can login to your MySQL server without a
password!.
To set a MySQL password use the following command:
[root@server html]# mysqladmin –u root password �new-password’
The MySQL server includes a test database. This database is not needed in production
environments. Drop this database.
[root@server html]# mysql –u root –p
Enter Password:
mysql>drop database test;
Query OK, 0 rows affected (0,03 sec)
For the MySQL database add the following parameter to make sure that your MySQL server can only
be used via localhost. Change your /etc/my.cnf and add the following line:
[mysqld]
bind-address=127.0.0.1
68
How To Install and Secure eGroupWare
7.10 Backup and restore your database!
Groupware is mission critical software in your IT environment. If you lose your groupware software, along with all of
the information stored in it (calendar information, contacts, knowledge base entries, trouble tickets, etc.) it can be
a disaster for your company or yourself.
The database, the directories used by eGroupWare outside the web server’s root and the header.inc.php files are
all needed to restore an eGroupWare installation from scratch. There are several professional backup tools on the
market to make a backup from your eGroupWare installation. If you do not have access to those tools, however,
some simple ways to perform backups will be shown.
You can also use the backup application shipped with eGroupWare itself. This will work for a single installation of
eGroupWare on a server – but what do you do if there are several installations you need to back up? What if your
web server is down? For these reasons, you should also understand how to backup from the command line.
7.10.1
Decide your backup solution
Your backup strategy depends on the time you have to setup a new groupware server: how long your users can
“live” without the groupware software and the information it provides.
Requirements
YES
NO
Your users can live without
the groupware software for
more the 6 hours?
Your database and file sizes
will
be
less
than
a
few
hundred megabytes?
You have a server on which
you can temporarily install
the groupware software while
the main server is restored?
You can set up a complete
server,
including
operating
system, in-house/alone?
If you answer one or more questions with NO, you should use a professional backup solution and not these simple
scripts which we provide here to backup your server. There are many commercial solutions available but also
open source backup solutions with which you can backup a complete server (such as bacula 25).
25 http://www.bacula.org/
69
How To Install and Secure eGroupWare
7.10.2
Backup the MySQL database
7.10.2.1 Manualy backup the MySQL database
To manually make a backup of your database, you can use the following command:.
[root@server html]# mysqldump –u yourmysqladmin -p - -opt database > /directory/database.sql
When you use mysqldump without the –opt flag, the complete backup will first be written to memory
and then to the file! This can be a problem if you are backing up large databases.
7.10.2.2 Backup your MySQL with a daily cronjob
Copy this script to your /etc/cron.daily directory (or wherever your daily cron scripts should be placed for your
distribution) and make it executable.
#!/bin/sh
# The name from the database which you want to backup
db_name="yourdbname"
# The username to connect the database
dbusername="dbuser"
# The password to connect the database
dbuserpassword="dbpassword"
# The directorty outside the webserver root we must backup.
# Please provide the complete path to this directory
files_directory="/var/www/files"
# The path to the egroupware root, as example /var/www/html/egroupware
webserver_root="/var/www/html/egroupware"
# In which directory you want to store the backup
backup_directory="/your/backup/dir"
# Path to the backup log
log=/var/log/db_backup
# The name under which we store the backup
backup=$backup_directory/$db_name-`date +%Y%m%d%H%M`.sql
echo `date`": starting backup of DB $db_name to $backup" >>$log
# create the DB backup
70
How To Install and Secure eGroupWare
mysqldump
--user=$dbusername
--password=$dbuserpassword
--opt
$db_name
2>>$log > $backup
# zip the backup file
bzip2 $backup 2>&1 >> $log
echo `date`": backup of DB $db_name finished" >>$log
# bzip the directory outside the webserver root
tar cjvf $backup_directory/files-`date +%Y%m%d%H%M`.bz2 $files_directory
# Copy the header.inc.php file to the backup directory
cp
$webserver_root/header.inc.php
$backup_directory/header.inc.php-`date
+%Y%m%d%H%M`
# Delete backups which are older than X days
cd $backup_directory
find . -name "$db_name-*.sql.bz2" -mtime +14 | \
xargs --no-run-if-empty rm –f
find . -name 'files-*.bz2' -mtime +14 | xargs --no-run-if-empty rm -f
find . -name 'header.inc.php-*' -mtime +14 | \
xargs --no-run-if-empty rm -f
7.10.2.3 Restore the MySQL database
To restore your database, you must create the database and restore the data from your backup file:
[root@server html]# mysqladmin –u yourmysqladmin –p create yourdatabase
[root@server html]# mysql –u yourmysqladmin –p < /directory/database.sql
71
How To Install and Secure eGroupWare
7.10.3
Backup the PostgreSQL database
7.10.3.1 Manualy backup the PostgreSQL database
To manually make a backup from your database, you can run the following command:
[root@server html]# su – postgres
-bash-2.05b$ pg_dump –C –d –F t –b database -f /directory/database.tar
7.10.3.2 Create a cron job for the PostgreSQL srcipt
You must create a cron job for the user postgres to start the daily backup shell script.
[root@server html]# crontab –u postgres –e
Add the following line to the file and save it. This will run your backup script daily at 10 pm.
0 22 * * * /bin/bash /path/to/the/backup/script
PostgreSQL backlup shell script
#!/bin/bash
# The name from the database which you want to backup
db_name="yourdbname"
# The directorty outside the webserver root we must backup.
# Please provide the complete path to this directory
files_directory="/var/www/files"
# The path to the egroupware root, as example /var/www/html/egroupware
webserver_root="/var/www/html/egroupware"
# In which directory you want to store the backup
backup_directory="/your/backup/dir"
# Path to the backup log
log=”/var/log/db_backup”
# The name under which we store the backup
backup=$backup_directory/$db_name-`date +%Y%m%d%H%M`.tar
echo `date`": starting backup of DB $db_name to $backup" >>$log
# Clean and analyse a PostgreSQL database
/usr/bin/vacuumdb --d $db_name --analyze
72
How To Install and Secure eGroupWare
# create the DB backup
pg_dump --create --inserts --format=t --blobs $db_name --file $backup
2>>$log
# bzip the directory outside the webserver root
tar cjvf $backup_directory/files-`date +%Y%m%d%H%M`.bz2 $files_directory
# Copy the header.inc.php file to the backup directory
cp
$webserver_root/header.inc.php
$backup_directory/header.inc.php-`date
+%Y%m%d%H%M`
# Delete backups which are older than X days
cd $backup_directory
find . -name "$db_name-*.tar" -mtime +14 | xargs --no-run-if-empty rm -f
find . -name 'files-*.bz2' -mtime +14 | xargs --no-run-if-empty rm -f
find . -name 'header.inc.php-*' -mtime +14 | \
xargs --no-run-if-empty rm -f
7.10.3.3 Restore the PostgreSQL database
To restore your PostgreSQL database you can run the following command as user postgres.
[root@server html]# su – postgres
-bash-2.05b$ pg_restore -f /directory/database.tar –F t –d database
73
How To Install and Secure eGroupWare
8
8.1
Setup eGroupWare
Creating your database
eGroupWare can automatically create the database for you. At the moment this works with MySQL, MSSQL
and PostgreSQL databases! If you want eGroupWare to create your databases automatically,
proceed to section 8.5.1.
8.1.1
Create the MySQL database
Create your database and a user which can connect to it.
Create the database:
[root@server html]# mysqladmin –u yourmysqladmin –p create yourdatabase
Enter password:
Create the user and give him DB rights:
[root@server html]# mysql –u yourmysqladmin –p
Enter password:
mysql> grant all on egroupware.* to egroupwaredbuser@localhost
identified by “password”
8.1.2
Create the PostgreSQL database
Validate that a connection to your database is possible.
From your ROOT account change to the postgres account:
[root@server html]# su - postgres
Edit the file postgresql.conf:
-bash-2.05b$ cd data
-bash-2.05b$ vi postgresql.conf
Your file should look like the example here:
#Connection Parameter
tcpip_socket = true
#ssl = false
#max_connections = 32
port = 5432
74
How To Install and Secure eGroupWare
Edit the file pg_hba.conf so that it looks like our example:
# TYPE DATABASE USER IP_ADDRESS MASK AUTH_TYPE AUTH_ARGUMENT
local egroupware trust
host egroupwaredbname all 127.0.0.1 255.255.255.255 md5
The USER value appears in PostgreSQL 7.3.X and above.
Restart you PostgreSQL server and test the connectivity:
[root@server html]# /etc/init.d/postgresql restart
[root@server html]# su - postgres
bash-2.05b$ psql -h localhost template1
Close the database connectivity:
template1=# \q
Set up your PostgreSQL database.
Create a user which has rights to access the eGroupWare DB:
bash-2.05b$ createuser yourdbusername –P
Answer the next questions with yes:
bash-2.0.5b$ Shall the new user be allowed to create databases?
(y/n) Y
bash-2.0.5b$ Shall the new user be allowed to create more new
users? (y/n) N
Create the new eGroupWare database:
bash-2.05b$ createdb -U yourdbusername yourdatabasename
8.2
How to start the setup?
Point your Browser to your server URL to open the setup menu:
https://www.yourserver.com/egroupware/setup
You will automatically be redirected to a check of the eGroupWare installation, which is our next step.
75
How To Install and Secure eGroupWare
8.3
Checking the eGroupWare installation
If no header.inc.php file is found, eGroupWare runs a check verifying some configuration parameters in your
php.ini file and in your local file system. The check shows you errors and warnings that will help you solve any
configuration problems.
Errors are shown with a red cross and must be solved by you!
Warnings may be ignored, but should probably be fixed. For example, you may see a warning from the
check for safe_mode. If you know how to configure the safe mode restrictions it will be no problem for you, but
for new users it is often better to disable this function.
8.4
Creating your header.inc.php
Most parts in the setup for your header.inc.php are self-explanatory. This menu is available in other languages
then English, but it may not be translated to your own language yet.
At the moment eGW supports MySQL, PostgreSQL and MSSQL. MaxDB support for eGroupware is on the way
With the Domain select box, you can setup more than one eGroupWare installation. For example, you
could have an installation for your employees to work with and a separate one as a training
environment.
If you set up your database manually, like in step 6.1, you have given the database a name, user, and
password. If you want the eGroupWare setup program to create the database automatically you must
first provide the values here.
When you have the possibility, limit the access to eGroupWare setup page!. It protects your installation as
example again brute force attacks. You can protect the access as example to a IP address
(183.12.34.87), to a subnet (192.168.0) or to a hostname (myhostname.mynet.org)
76
How To Install and Secure eGroupWare
The following fields describe which database you want to use for eGroupWare and the database user which
can connect to the eGroupWare database.
Don’t use your database administrator to connect to the
database. Create a separate user!
DH Host
If your DB runs on the same machine as your
eGroupWare installation, it will be localhost.
You can also use a separate server to run your
DB on.
DB Name
The name of the database that you want to
create on your DB Server.
DB User
The user which eGroupWare uses to connect to
the database.
DB Password
This password of the DB user.
DB Type
Your DB type.
Download the created header.inc.php file to your local machine, then copy it to your eGroupWare installation’s
root directory and change the access rights so that only the web server has read access to this file.
[user@server tmp]$ scp header.inc.php youregwserver:/tmp
[user@server tmp]$ ssh youregwserver
[user@youregwserver user]$ su –
Password:
[root@server root]# mv /tmp/header.inc.php /var/www/html/egroupware; chmod 400
/var/www/html/egroupware/header.in.php;
chown apache /var/www/html/egroupware/header.in.php
Continue in your browser to go to the next step.
8.5
Setup / Config Admin
After you have finished creating the header.inc.php file and have continued to the next page, you will see two
login prompts. Log in to the Setup/Config Admin Login with the username and password you provided in the
previous step (8.4)
77
How To Install and Secure eGroupWare
8.5.1
Step 1 – Simple Application Management - Create your database
Here you have two possibilities: If you want to create your database in this step automatically, then go to
create your database now. If you have created your database manually, then go to create your tables.
Create your database:
Fill out the following form to create your database automatically:
DB root username
rootusername
DB Password
yourDBrootpassword
Click “Create Database.”
Click Re-Check My Installation:
If you see no errors, you can install the tables. Click Install:
Now, take a look at the status. If you see no errors here, continue with Re-Check My Installation:
78
How To Install and Secure eGroupWare
8.5.2
Step 2 – Configuration
Most parts in this step are self-explanatory. Only some oft-misunderstood information is provided here.
8.5.2.1 Creating the files folder
You have to create the files directory manually at the shell prompt. eGroupWare will store attachments from
Infolog, files saved in the Filemanager module, and some other files in this directory.
This directory must be outside of your web server root! If you don’t know where your web server root is,
take a look at your httpd.conf file or run the following command under Linux:
[root@server www]$ cat /etc/httpd/conf/httpd.conf | grep ^DocumentRoot
DocumentRoot “/var/www/html”
Create the files directory:
[root@server www]$ mkdir /var/www/files
You have to give the web server the rights to read and write to these directories:
[root@server www]$ chown –R apache.apache /var/www/files
[root@server www]$ chmod –R 0700 /var/www/files
8.5.2.2 Editing the current configuration
Path information
Enter the necessary values for your Path information
The tmp directory is needed to store sessions and other information from your eGroupWare
installation.
When your run your eGroupWare installation in a change root (chroot)
environment or with open_basedir restrictions in your php.ini, the path for the tmp directory must
adhere to these restrictions too.
The full path for user and group files must be outside the web server root for security reasons. It is not
possible to have this directory inside your web server root!
Enter the location of the eGW URL. If you want to use HTTPS and HTTP connections, use /egroupware
(if you want to force HTTPS then use https://yourdomain/egroupware).
79
How To Install and Secure eGroupWare
Please don’t change the image type selection order from its default (which may be different than the
example shown below). It can break the design of the UI.
Host information
Enter the hostname of your server. It must be a valid DNS name or an IP address under which the
installation will be run.
When your eGroupWare installation is located behind a Proxy Server (like SQUID) and you want to use
applications that connect to remote Internet sites, such as headlines or stocks, you must set up the
proxy values.
Authentication/Accounts
There are several authentication types available: SQL, SQL/SSL, LDAP, Mail, HTTP, NIS and PAM.
Select which type you want to use to authenticate your eGroupWare users.
Select the encryption type for user passwords. The user passwords will be stored encrypted in your
database.
When you want to use one LDAP tree for different eGroupWare installations for authentication, you
can use the account prefix.
Use case-sensitive usernames for better security.
80
How To Install and Secure eGroupWare
If using LDAP
If you don’t want to use LDAP, it is not necessary to fill in these fields. If you want to use LDAP, please take a look
at phpgwapi/doc/ldap/README.
Mcrypt settings (requires the mcyrpt PHP extension)
Not all distributions have a working mcrypt compiled into them by default, so you will need to check this. Also,
you may need to try several algorithms and modes to see which works best with eGroupWare given your
particular PHP and mcrypt version.
Additional settings
The standard values here are OK.
81
How To Install and Secure eGroupWare
When you are finished, save your configuration.
8.5.3
Step 3 – Set Up Your User Accounts
Here you create your eGroupWare admin account. Don’t use an admin username like
admin, administrator, root, etc. For your admin password, use letters, numbers and special characters.
Don’t create Demo accounts in production environments!
8.5.4
Step 4 – Manage Languages
The standard languages that will be installed are English and the language which you have activated as the
default language in your browser (if it is different than English). It is possible to install more languages.
You can convert your system-charset automatically, i.e. from ISO-8859-1 to UTF-8.
8.5.5
Step 5 – Manage Application
In the standard installation, all applications are installed. To uninstall any application, check the Remove checkbox
for that application and click Save. If you receive an error message about dependencies, you may have to install
another application. For example, felamimail requires emailadmin to run.
82
How To Install and Secure eGroupWare
9
Log In to eGroupWare
Once you have finished your setup of eGroupWare, you can log in. Go to http://yourdomain/egroupware (or
https://yourdomain/egroupware, if appropriate).
The first step as admin should be to go to the admin interface and set up your site configuration, users and
groups, email settings and other necessary information.
83
How To Install and Secure eGroupWare
10 Troubleshooting
10.1 Forgot the admin password
I forgot my admin password and can’t log in with my admin user to eGroupWare!
Go to http://yourserver.com/egroupware/setup
Log in to Setup/Config Admin Login
Set up a new admin account.
10.2 Admin user or other user is blocked
I can’t log in anymore to my eGroupWare installation. I receive: Blocked, to many attempts. What can I do?
Using a standard configuration, you must wait 30 minutes to be able to log in again. This is a security
feature -- don’t disable it!
10.3 Database error: lock(Array, write) failed
Database error: lock(Array, write) failed
MySQL Error 1044 (Access denied for user '@localhost' to database 'groupware')
Function: db::halt / db::lock / config::save_repository / sessions::sessions_ / session_sessions / createobject / include
/ include
session halted
Check the permissions of your database. Your user does not have all necessary rights.
10.4 Checking file permissions
This error is occurring when I run the Check Installation script:
Checking file-permissions of ./phpgwapi/images for not worldwritable: hri/users drwx---rwx
./phpgwapi/images is world writeable!!!
Change the rights in the directory phpgwapi/images so it is not world-writeable:
chmod 700 images
10.5 Cannot get past the Check Install page (#1)
There are no warnings or errors......I install the header.inc.php file with all of the correct values, etc., but I keep
ending up back at that bloody check_install.php page...
Check that the web server has the rights to read the header.inc.php file and that
the file is in your eGroupWare root.
84
How To Install and Secure eGroupWare
10.6 Cannot get past the Check Install page (#2)
We installed eGroupWare on a Linux box that also has a proxy server installed.
Clients are using Microsoft Internet Explorer that has a reference to the proxy server, although the proxy server
should be bypassed (options->connection->proxy->advanced settings).
We are not able to upload attachments greater than 1 Mb. Everything in php.ini and httpd.conf was applied, but
we are still not able to upload >1 MB
Proxy servers often must be configured to allow a stream through that is greater than a certain
default size. For instance, in Squid, you need to change the "request_body_max_size" from its default
of 1MB.
eg: request_body_max_size 20 MB
10.7 Windows: fudforum/3814******9): Permission denied
Warning: mkdir(D:\Websites\yourwebsite\egroupware\fudforum/3814******9): Permission denied in D:\Websites
\egroupware\fudforum\setup\default_records.inc.php on line 114
ERROR: Failed to create D:\Websites\yourwebsite\egroupware\fudforum/38145******, please create this directory
manually and chmod it 777SiteMgr demo site installed
Simply went in and created the directory 3814****** under
D:\Websites\yourwebsite\egroupware\fudforum directory and gave it read and write
permissions. Please Note: the “3814******” number will be the CRC32 of your domain,
so it will be different with each machine."
**This taken from the D:\websites\yourwebsite\fudforum\setup\readme file – “The
\fudforum\setup\index.php file will need to create several files inside the web browseable
fudforum\ directory. This will require you to grant write permissions to the web-server to several
files and directories (installer will complain about them, if they are not writable). The simplest
solution is to temporary give the fudforum/ directory full access permissions and then restore to
normal permissions (read and write) once the installation process is complete. If you wish to
save a few megabytes of space, once the forum is installedyou can remove the base/
directory, it is no longer needed.”
10.8 Sitemgr: mkdir(./sitemgr-link): Permission denied
Warning: mkdir(./sitemgr-link): Permission denied in
D:\Websites\calvarycentral\egrouptest\egroupware\sitemgr\setup\default_records.inc.php on line 165
Can't mkdir(./sitemgr-link) !!!sitemgr/sitemgr-link copied to eGroupWare dir and sitemgr-link NOT installed, you need
85
How To Install and Secure eGroupWare
to copy it from egroupware/sitemgr/sitemgr-link to egroupware/sitemgr-link and install
Copy the sitemgr-link folder from \egroupware\sitemgr\ that was created by eGroupWare
and placed it in the root folder of D:\Websites\yourwebsite\egroupware. This enables you
to install it from the “Manage Applications” link on the /egroupware/setup/index.php page.
10.9 Error 1250 (Client does not support authentication protocol requested by server
If you're using MySQL version 4.1 or higher and you've been getting database errors trying to set up eGW, this will
probably fix the problem:
MySQL 4.1 by default uses a new password authentication protocol that is incompatible with the current release of
eGroupWare.
If you attempt to let eGroupWare create the database for you using the MySQL root user, it fails with the following
error:
Error 1250 (Client does not support authentication protocol requested by server ...
To fix this, you must first edit your MySQL configuration by either starting with the
--old-passwords command line option or by adding the following to your my.ini file:
#Use old password encryption method (needed for 4.0 and older clients).
old-passwords
Now update the MySQL user(s) passwords with the following command:
mysql> SET PASSWORD FOR -> 'some_user'@'some_host' = OLD_PASSWORD('mypass');
10.10 Create a admin account but can’t login
I create in setup a admin account but when I want login, I receive wrong username or password. With the created
demo account, login is possible.
Some username are not allowed as eGroupWare usernames. They are blocked
when you use it as usernames.
root, bin, daemon, adm, lp, sync, shutdown, halt, ldap, mail, news, uucp, operator,
games, gopher, nobody, xfs, pgsql, mysql, postgres, oracle, ftp, gdm, named, alias,
web, sweep, cvs, qmaild, qmaill, qmaillog, qmailp, qmailq, qmailr, qmails, rpc, rpcuser,
amanda, apache, pvm, squid, ident, nscd, mailnull, cyrus, backup
86
How To Install and Secure eGroupWare
10.11 Loop when creating database
I running in a endless loop when create the database in setup
Please test it with another browser. Some versions of Internet Explorer cause problems.
10.12 Check with what modules php is compiled
I have a problem during my attempt to install egroupware in my computer.
The problems message is: Checking extension mssql is loaded or loadable: False
I changed the php.ini and i add the line:extension=php_mssql.dll
But then when i tried to check installation the next window appeared:
Unknown():Unable to load dynamic library'./php_mssql.dll'-The specified module could not be found
This problem occurred due to PHP not being able to find a file named php_mssql.dll in its
installed directory (default is C:\php). Following these steps:
1. Start->Run->cmd. At the command prompt, change to your PHP directory (i.e. C:\PHP, using the
appropriate path for your system).
2. type php -v , hit Enter and remember your PHP version.
3. Go to http://www.php.net/releases.php and download the zip package (Windows binary) of your
PHP version.
4. Extract the zip package to a folder. Change to that folder, then to the extensions subfolder. Copy
the php_mssql.dll file to your PHP directory.
10.13 mbstring error at install
During the check install script, I receive an error about missing mbstring, or other similar errors..
Use the following command from the command line to find out what is compiled into PHP in your
distribution:
php –m
10.14 PHP include path error message
I get the following error message:
Checking php.ini: include_path contain
.: ini_get('include_path')='./:/usr/local/lib/php'
include_path need to contain "." - the current directory
include_path = .:./:/usr/local/lib/php
87
How To Install and Secure eGroupWare
11 Software Map
AIDE, Advanced Intrusion Detection System
Platform
Linux / BSD / *nix
License
GPL
Homepage
sourceforge.net/projects/aide
Download
RPM
Take a look at your distribution
DEB
Debian Project
tar.gz
AIDE Project file server
Apache Web server project
Platform
Linux / BSD / Win / other
License
Apache Software License
Homepage
httpd.apache.org
Download
RPM
Take a look at your distribution
DEB
Debian Project
tar.gz
Apache Project file server
Win
Apache Project file server
Bacula – The Network Backup Solution
Platform
Linux / BSD / Win / other
License
GPL / LGPL
Homepage
www.bacula.org
Download
RPM
sourceforge.net bacula project
DEB
sourceforge.net bacula project
tar.gz
sourceforge.net bacula project
Win
sourceforge.net bacula project
88
How To Install and Secure eGroupWare
chkrootkit project
Platform
Linux / BSD
License
BSD-Like
Homepage
www.chkrootkit.org
Download
RPM
creativix chkrootkit page
tar.gz
chkrootkit project
eAccelerator
Platform
Linux / BSD / Win / other
License
GPL
Homepage
sourceforge.net/projects/eaccalerator
Download
tar.gz
eAccelerator project
tar.bz2
eAccelerator project
zip
eAccelerator project
eGroupWare project
Platform
Linux / BSD / WIN / other
License
GPL
Homepage
www.egroupware.org
Download
RPM
sourceforge.net eGroupWare project
tar.gz
sourceforge.net eGroupWare project
tar.bz2
sourceforge.net eGroupWare project
zip
sourceforge.net eGroupWare project
ElyCA project
Platform
Linux / BSD
License
GPL
Homepage
www.elyca.org
Download
tar.gz
sourceforge.net eGroupWare project
firewall builder
Platform
Linux / BSD/ Mac
License
GPL
Homepage
www.fwbuilder.org
Download
RPM
fwbuilder project
DEB
Debian project
tar.gz
fwbuilder project
89
How To Install and Secure eGroupWare
fwlogwatch
Platform
Linux / BSD/ other
License
GPL
Homepage
fwlogwatch.inside-security.de
Download
RPM
fwlogwatch project
DEB
fwlogwatch project
tar.gz
fwlogwatch project
tar.bz2
fwlogwatch project
logwatch project
Platform
Linux / BSD/ other
License
GPL
Homepage
www.logwatch.org
Download
RPM
logwatch project
tar.gz
logwatch project
logcheck project
Platform
Linux / BSD/ other
License
GPL
Homepage
sourceforge project page
Download
tar.gz
logcheck project
ModSecurity
Platform
Linux / BSD / WIN / other
License
GPL
Homepage
www.modsecurity.org
Download
tar.gz
ModSecurity project
zip
ModSecurity project
NMAP
Platform
Linux / BSD / WIN / other
License
GPL
Homepage
www.nmap.org
Download
RPM
NMAP project
tar.gz
NMAP project
tar.bz2
NMAP project
zip
NMAP project
90
How To Install and Secure eGroupWare
OpenSSH project
Platform
Linux / BSD
License
GPL
Homepage
www.openssh.org
Download
RPM
OpenBSD project fileserver
tar.gz
OpenBSD project fileserver
Osiris project
Platform
Linux / BSD/Win/Mac
License
GPL
Homepage
osiris.shmoo.com
Download
tar.gz
Osiris project
Win EXE
Osiris project
PHP project
Platform
Linux / BSD / WIN /other
License
The PHP License
Homepage
www.php.net
Download
RPM
Take a look at your distribution
tar.gz
php project
tar.bz2
php project
zip
php project
Rootkit Hunter
Platform
Linux / BSD / Mac
License
GPL
Homepage
http://www.rootkit.nl/projects/rootkit_hunter.html
Download
RPM
packages external build
tar.gz
rootkit hunter homepage
Roxen web server project
Platform
Linux / BSD /WIN / other
License
GPL
Homepage
www.roxen.com/products/web server
Download
The Linux package will be installed with a shell script
91
How To Install and Secure eGroupWare
Shorewall
Platform
Linux
License
GPL
Homepage
www.shorewall.net
Download
RPM
take a look at your distribution
DEB
Debian project
tar.gz
shorewall project
92
How To Install and Secure eGroupWare
12 Useful Documentation
Open Source Development with CVS
Platform
All
License
GPL
Format
PDF
Homepage
http://cvsbook.red-bean.com/OSDevWithCVS_3E.pdf
Advanced Bash Scripting Guide
Platform
All
License
Open Publication License
Format
PDF / HTML
Homepage
http://www.tldp.org/LDP/abs/abs-guide.pdf
13 Example configuration scripts
13.1 AIDE
AIDE, Advanced Intrusion Detection System cron script
http://egroupware.org/scripts/aide_cronjob
md5sum d79a50428563764fea29f1c604f5d838
AIDE, sample config file
http://egroupware.org/scripts/aide.conf
13.2 Backup
MySQL backup cron script
http://egroupware.org/scripts/mysql_backup_cronjob.sh
md5sum e9902eb3303665dbdc6c8cb654c51e0f
PostgreSQL backup cron script
http://egroupware.org/scripts/postgresql_backup_cronjob.sh
md5sum b067023f0cec4ae09676c538524256e3
93
How To Install and Secure eGroupWare
13.3 Iptables
Simple iptables firewall script (example from this document for advanced users)
http://egroupware.org/scripts/advanced_user_egroupware_iptables.sh
md5sum 3244f125e811e79c7a618231dc6a497f
Advanced Iptable firewall script
English version
http://egroupware.org/scripts/egroupware_iptables.sh
md5sum ee87dc2718c99057f1a4ffe76c2b73f2
Portuguese version
http://egroupware.org/scripts/br_egroupware_iptables.sh
md5sum 06284428564e69e7486d5f609c19104b
94
How To Install and Secure eGroupWare
14 To-do and Change Log
14.1 The to-do list for this document
For document version 0.6:
•
MaxDB
•
Snort-inline
•
Training the users
•
Greylisting for mailservers
•
Customisation the eGroupare
•
Where to install the groupware
•
Osiris installation and cutomization
•
Firewall logwatch installation and usage
•
Pre-planning an eGroupWare installation
•
SMTP server installation and configuration
•
IMAP / POP server installation and configuration
•
Anti Virus and Spam protection for mail server/gateways
•
Connect the Road warrior to the groupware (OpenVPN)
For document version 0.7:
•
Windows/Mac extensions
•
Setup and config the ElyCA certificate authority
•
Tuning MySQL installation
•
Installing an LDAP server and configuring OpenLDAP / Email / SMTP under *nix.
•
Netscape Directory Server
•
Netscape Certificate Management System
More after this release:
•
mod_log_forensic for Apache.
•
Hide the ssh version.
•
Fedora support (YUM, RPM-apt).
•
Add psad to the security HOWTO.
•
sXad installation and config.
•
Bastille Linux / LSAD.
95
How To Install and Secure eGroupWare
14.2 Change log for the book
* Sun Dec 05 2004 Reiner Jung <rjung AT expl0it DOT de> 0.5
- fix error in Files restriction for Apache (Security)
- Aide example config file
- When you should update
- Troubleshooting extended
- Install eGroupWare with bitrock installer
- cvs update to the stable branch
- The filesystem layout from your server
- Restrict access to setup
- Firewall
Planing a firewall
How to create firewall rules
Example firewall script
Install the firewall script
Firewall logfile analyse
Example firewall script for download
- Config files for download
- Backup and restore your database
Decide your backup solution
Manually backup the MySQL database
Backup MySQL with a daily cronjob
Restore your MySQL database
MySQL backup script for download
Manually backup the PostgreSQL database
Postgresql backup script
Create a cron job for PostgreSQL
Restore your PostgreSQL database
PostgreSQL backup script for download
- Install eGroupWare with Bitrock Windows installer
* Thu May 18 2004 Reiner Jung <r.jung AT creativix DOT net> 0.4
- License changed to creative commons
- Build SuSE packages from source RPM
- Apache Security and Optimisation
- SQL encryption for user password possible
- Setup provides account prefix for LDAP installations
- Select in setup case sensitive usernames
- Troubleshooting added
- Secure your eGroupWare with ModSecurity
- update the header.inc.php file
- Secure PHP installation updated
96
How To Install and Secure eGroupWare
open basedir restriction
disable error logs
- Setup Advanced Intrusion Detection System
- Change the Quick install HOWTO to Express Install HOWTO and extend it
- Express Install includes Windows now
- Install logfile analyser (logcheck)
- Turck-mmcache extended
How to install mmcache on RedHat Enterprise Linux
Requirements for install mmcache
* Sun Nov 22 2003 Reiner Jung <r.jung AT creativix DOT net> 0.3
- Update eGroupWare
Update with packages
Update from CVS
- Install from a RPM to a other path like /var/www/html
- Software Map
Add the software and the license from all pieces from 03 documents
- Some typo errors fix
GPG key typo fixed
- Verify the GPG key added
- Create a https certificate
- Secure PHP installation
* Fri Sep 16 2003 Reiner Jung <r.jung AT creativix DOT net> 0.2
- Some typo errors fixed
Fix error in CVS install documentation and in mmcache
- chkrootkit how to added
Checkrootkit sample snippet
Install check rootkit RPM
Install check rootkit tar.gz
- check your server for unneeded service / open ports
Ports which eGW server needs to run
The portscanner
Output from the portscanner
Disable unneeded services/servers
- uninstall unneeded software extended
- secure administration (ssh/sshd)
Connecting your server with a secure session
Working with ssh key pairs
Creating a secure shell key pair
Copying your public key to the server
The ssh-add tool , Securing your ssh client
Securing your sshd
97
How To Install and Secure eGroupWare
15 Contributors to this Document
The following people have contributed to the Install and Security HOWTO:
Translations
Brazil Portuguese:
Roger de Souza Moraes, Leandro Arruda, Renato Cintra, Tales Costa
French:
Patrice Lallement (v0.3)
Spanish:
OscГЎr Manuel GГіmez Senovilla
Indonesian:
Willy Sudiarto Raharjo
Traditional Chinese:
Finjon Kiang
Proof reading
English:
Jeff Mitchell (v0.4, 0.5)
Geltmar von Buxhoeveden (v0.3)
Co-Authors
Windows Version
John W. Brown
Artwork and Prepress
Andreas Krause
98
How To Install and Secure eGroupWare
16 Humanly-Readable License
Attribution-ShareAlike 2.0
You are free:
•
to copy, distribute, display, and perform the work
•
to make derivative works
•
to make commercial use of the work
Under the following conditions:
Attribution. You must give the original author credit.
Share Alike. If you alter, transform, or build upon this work, you may
distribute the resulting work only under a license identical to this one.
•
For any reuse or distribution, you must make clear to others the license terms of this work.
•
Any of these conditions can be waived if you get permission from the author.
Your fair use and other rights are in no way affected by the above.
This is a human-readable summary of the Legal Code (the full license) 26.
26 http://creativecommons.org/licenses/by-sa/2.0/legalcode
99
How To Install and Secure eGroupWare
17 Index
A
E
AIDE ........................................................................38, 93
EGROUPWARE-GPG-KEY......................................... 21
AIDE configuration ........................................................39
Express Install ............................................................... 11
AIDE cronjob .................................................................41
F
AIDE init ........................................................................40
AIDE report ....................................................................43
aide.conf .........................................................................39
Apache modules .............................................................57
Apache security ..............................................................57
Application security........................................................53
Firewall.......................................................................... 45
Firewall builder.............................................................. 46
Firewall logfile analyse.................................................. 53
Firewall planning........................................................... 45
Firewall script ................................................................ 46
fwlogwatch .................................................................... 53
B
G
Backup............................................................................93
Backup solutions ............................................................69
Basic Server Security......................................................28
Bitrock installer ..............................................................25
GPG key ........................................................................ 20
H
Header Admin................................................................ 14
C
header.inc.php.......................................................... 18, 76
CACert............................................................................63
I
Certificate .......................................................................63
Certificate install.............................................................66
Certificate signing request ..............................................64
Checklist .........................................................................10
Chkrootkit.......................................................................32
Chkrootkit RPM .............................................................33
Chkrootkit tar.gz.............................................................34
chkrootkit_cronfile..........................................................34
D
Database backup .............................................................69
DB Host ..........................................................................77
DB name .........................................................................77
DB password ..................................................................77
DB type...........................................................................77
IIShield .......................................................................... 53
Install an RPM package ................................................. 24
Install ModSecurity ....................................................... 54
Installing a GPG-signed package .................................. 23
Installing an unsigned package...................................... 23
Installing from CVS....................................................... 27
Installing the GPG key .................................................. 19
Installing the packages................................................... 23
Intrusion detection ......................................................... 38
Iptables .......................................................................... 94
Iptables example script .................................................. 46
K
Key for the RPM............................................................ 21
Keyserver....................................................................... 21
DB user...........................................................................77
Disabling unneeded services ..........................................30
L
Downloading the packages.............................................19
LDAP............................................................................. 81
Dynamic Shared Object..................................................54
Log files......................................................................... 37
100
How To Install and Secure eGroupWare
Logcheck ........................................................................37
Logsurfer ........................................................................37
Logwatch ........................................................................37
R
Rebuilding the RPM package ........................................ 24
Rootkit hunter ................................................................ 32
M
Running services ........................................................... 29
md5sum ..........................................................................22
S
Migrating from phpGroupWare......................................16
MMCache .......................................................................58
ModSecurity ...................................................................53
ModSecurity basic setup.................................................54
ModSecurity log .............................................................56
ModSecurity testing........................................................55
MsSQL ...........................................................................10
MySQL .........................................................10, 68, 70, 74
MySQL backup ..............................................................70
MySQL cronjob..............................................................70
MySQL restore ...............................................................71
N
Nmap ..............................................................................30
O
Open ports ......................................................................29
Samhain ......................................................................... 38
Setup / Config Admin.................................................... 77
Shoorewall..................................................................... 45
SMTP server .................................................................. 10
Sourceforge download area ........................................... 11
SQL server..................................................................... 68
SSH................................................................................ 35
SSH key pair create ....................................................... 36
SSH key pairs ................................................................ 36
SSH public key .............................................................. 36
ssh-keygen ..................................................................... 36
T
Thawte ........................................................................... 63
Tripwire ......................................................................... 38
Turck MMCache............................................................ 58
Operating system ............................................................10
U
P
Uninstalling unneeded software .................................... 31
Partitioning .....................................................................28
PHP security ...................................................................62
phpize .............................................................................58
Portscanner .....................................................................30
Updating eGroupWare................................................... 17
V
Verifying the GPG key .................................................. 20
Verisign ......................................................................... 63
Portscanner output ..........................................................30
PostgreSQL.........................................................10, 72, 74
W
Web server............................................................... 10, 67
Web server certificate.................................................... 63
101
How To Install and Secure eGroupWare
Errata:
102

79 Corvette with Telescoping Column - Nebraska Locksmith

How to install and secure eGroupWare - Directory UMM

How to install GT1\EasyDIS v44 step-by-step - scchosting.com

Help: Step-by-Step guide for Windows XP driver installation - RME

How to Build Ardupilot with Arduino - DIY Drones Firmware Download

ACCESSING MICROSOFT OFFICE 365 FREE STUDENT - Unitec

Neils Really Easy Guide to Building Your Own Website

Page 1 of 18 How to install Citrix XenApp 6 for Windows Server

VIRTUAL DJ Pro Full” DJ CONTROLLER - Pioneer

How to install and how to use WEB LCT console

Step by Step guide to building a Wordpress site - PDF

PHP HOW-TO - ebook

TIA Portal V12 Visualization with WinCC V12

PHP HOW-TO

PHP HOW-TO@studenti