! NEW Improved 5307 Meadowland Parkway | Marion, IL 62959 contents Industrial Markers .................................................................................5 Stencil Machines ..................................................................................9 Stencil Board ......................................................................................11 Custom Cut Stencils ...........................................................................12 Packing Envelopes ..............................................................................12 Oneshot® Kits ....................................................................................13 Oneshot® Applicators ........................................................................15 Rol-It-On Kits ......................................................................................16 Stenciling Inks ....................................................................................17 Quick-Spray® Aerosols......................................................................19 Hand Duplicators ................................................................................20 Adhesives & Glues..............................................................................21 Glue Machines ....................................................................................22 Tape Dispensers & Gummed Tape ......................................................22 Hand Coders .......................................................................................23 Hand Stampers ...................................................................................23 Roll Coders .........................................................................................24 Roll Coder Type ..................................................................................25 Roll Coder Inks ...................................................................................26 Web Roll Coders .................................................................................27 Reciprocating Coders..........................................................................28 IV 700 .................................................................................................29 ITW Inks ..............................................................................................30 For MSDS Sheets visit our web site Web Site: www.diagraphmsp.com At Diagraph, we manufacture and distribute products that help you mark, code and ship! If you need more information, have questions on any of our products, systems, services, or want to place an order, don’t hesitate to contact us. Phone: • 1-800-521-3047 Fax: • 1-866-350-0196 We have made a conscious effort to produce our products in America whenever possible. 2 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww pro d his page are on t ts c u GP-X ® Mark-X ® Valve-Action Marker Valve-Action Marker Our best seller! This fast-drying, weather- and fade-resistant paint doesn’t chip and makes a bold, opaque, permanent mark on almost any surface, including metal, rubber, wood, plastic, PVC and glass. Available in 8 colors. Replaceable felt tips. This marker’s valve-action tip delivers a measured supply of ink for consistent, permanent marks. Perfect for marking on fiber, paper, plastic and labels. Dries quickly. Available in 3 colors. Replaceable felt tips. 2018P Valve-Action Paint Marker Heavy-duty pigmented paint will mark on most surfaces. Replaceable bullet tip and airtight cap. Available in 9 colors. Replaceable felt tips. ® Jumbo Insta-Marker Capillary-Action Marker 563 Speedry Paint Markers Valve action with acrylic replacement tip. Easy to hold 9/16” diameter aluminum barrel. Airtight color-coded cap fits on recessed end of the barrel. Opaque, fast drying permanent paint. Available in 13 colors. Replaceable felt tips. Provides an instant, waterproof, permanent mark on porous and most non-porous surfaces. Features a chisel-point tip for variable-size marking. Available in black. Control Flo™ Marker Refillable Valve-Action Makes a bold mark on most surfaces. The Control-Flo Marker’s large ink capacity results in a low cost per mark. Use with Insta-Dry and Stikfast® inks listed on page 17. Replaceable felt tips. Perma-Line Capillary-Action Marker Ideal Mark Valve-Action Indelible Marking Pen Legendary performance, excellent value. Indelible, fade resistant ink, color coded cap, pocket clip, leakproof aluminum valve. Available in 4 colors. Replaceable felt tips. A fine line marker that makes a permanent mark. Resists wear to assure a fine point for the life of the marker. Ideal for non-porous surfaces. Dries Quickly Available in black. NEW ! E-Z CLEAN Valve-Action Marker Just the opposite of all the other markers on this page. This marker ERASES! Turn the page for more information. Replaceable felt tips. 3 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp A Safer Environmentally Friendly and More Efficient Way to Mark on Just About Anything! $ 2.70h eac Features & Benefits: X-F™ Xylene Free Marker STOCK # DESCRIPTION 0920-001 Xylene Free White 0920-002 Xylene Free Yellow 0920-003 Xylene Free Black 0920-005 Xylene Free Blue 0920-006 Xylene Free Red 0920-004 Xylene Free Green 0920-007 Xylene Free Orange 0958-401 Tip, Replacement 0940-018 Tip, Taper Down For price breaks, see page 5. MIN. ORDER PRICE 12 12 12 12 12 12 12 12 Pack 12 Pack $2.70 2.70 2.70 2.70 2.70 2.70 2.70 6.00 6.00 Marks on: • Drying time between 20 - 30 seconds • Contains no Xyylene • Low Odor • Holds 12 cc's of Ink • Available in 7 colors • Weather- and Fade-Resistant • Porous & Non-Porous Materials • Light & Dark Color Surfaces • Paper, Plastic & Metal • Wood, Rubber & Glass E-Z CLEAN™ STOCK # DESCRIPTION MIN. ORDER 0980-001 E-Z CLEAN™ 1 0930-011 Tip, Std Felt Bullet 12 Pack 0930-010 Tip, Felt Chisel 12 Pack PRICE $3.95 6.00 6.00 Diagraph’s New E-Z CLEAN is a Quick, Convenient & Efficient Way to Remove Stubborn Marks, Adhesives & Residues. REMOVES: • Paint, Ink & Crayon • Sticky Labels & Adhesive Stickers • Gum, Wax & Soldering Flux • Tar, Asphalt, Oil Stains, & Grease CLEANS: • Most Non-Porous Materials • Metal, Aluminum & Steel • Plastic, Glass, PVC & Circuit Boards ALWAYS TEST THE SURFACE FIRST Stock # 0980-001 4 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 STOCK# Since developing the first disposable industrial marker, Diagraph has led the way with markers that perform on hard-to-mark surfaces and hold up under tough conditions. Markers are pre-packaged in cartons of a single color (except refillable Control-Flo marker and the GP-X Assortment Pack). Colors cannot be mixed within a carton. Prices reflect cost per individual marker. GP-X® Valve-Action Marker For hard-to-mark surfaces. GP-X markers produce fast-drying, opaque, permanent marks on metal, wood, corrugated, rubber, plastic, glass, porous, and non-porous surfaces. Available in eight weather- and fade-resistant colors. X-F™ Xylene-Free Marker Marks on porous and non-porous materials, light and dark color surfaces; paper, plastic, metal, wood, rubber and glass. COLOR RESISTANT TO MIN. ORDER EACH 144 576 $2.38 2.38 2.38 2.38 2.38 2.38 2.38 2.57 $2.25 2.25 2.25 2.25 2.25 2.25 2.25 2.43 1440 2880 GP-X Markers 0918-500 0968-500 0958-500 0968-520 0968-521 0968-522 0968-523 0968-524 0968-525 0958-401 0940-018 Black 600°F 12 $2.50 White 500°F 12 2.50 Yellow 500°F 12 2.50 Red 500°F 12 2.50 Blue 500°F 12 2.50 Green 600°F 12 2.50 Orange 500°F 12 2.50 Silver 800°F 12 2.70 Assortment Pak1 Each Color 16.95 Replacement Tip PACK OF 12 6.00 Tip, Taper Down PACK OF 12 6.00 $2.00 $1.75 2.00 1.75 2.00 1.75 2.00 1.75 2.00 1.75 2.00 1.75 2.00 1.75 2.16 1.89 Valve Action Markers 6 VALVE ACTION MARKERS You may combine colors to reach bracket pricing. Must order in quantities of 12. X-F™ Markers 0920-001 0920-002 0920-003 0920-004 0920-005 0920-006 0920-007 0958-401 0940-018 White 400°F Yellow 500°F Black 500°F Green Blue Red Orange Replacement Tip Tip, Taper Down 12 $2.70 12 2.70 12 2.70 12 2.70 12 2.70 12 2.70 12 2.70 PACK OF 12 6.00 PACK OF 12 6.00 $2.57 2.57 2.57 2.57 2.57 2.57 2.57 $2.43 2.43 2.43 2.43 2.43 2.43 2.43 $2.16 $1.89 2.16 1.89 2.16 1.89 2.16 1.89 2.16 1.89 2.16 1.89 2.16 1.89 Items bearing this symbol cannot be shipped by air. FOR BEST RESULTS: Shake marker until you hear the agitator. Then, twist the cap off and gently pump until the nib is inked. NEW! SEE RESISTANT TEMPERATURES ON CHART 5 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Industrial Markers Ideal Mark STOCK# Valve-Action Indelible Marking Pen RESISTANT TO MIN. ORDER EACH QTY. PRICING/PRICE PER MARKER: 144 576 1440 2880 IDEAL Mark Legendary performance, excellent value. Indelible, fade resistant ink, color coded cap, pocket clip, leak-proof aluminum valve. Only all metal marker in the industry. Replaceable felt tips. Mark-X® COLOR 0930-001 0930-002 0930-004 0930-006 0930-011 0930-010 Black 600°F 12 Blue 600°F 12 Green 300°F 12 Red 300°F 12 Tip, Std Felt BulletPACK OF 12 Tip, Felt Chisel PACK OF 12 $2.70 2.70 2.70 2.70 6.00 6.00 $2.57 2.57 2.57 2.57 $2.43 2.43 2.43 2.43 $2.16 2.16 2.16 2.16 $1.89 1.89 1.89 1.89 You may combine colors to reach bracket pricing. Must order in quantities of 12. Valve-Action The first valve-action disposable marker is still the best for marking on a wide variety of surfaces. Mark-X pens are perfect for marking on fiber, paper, plastic and labels. Permanent ink dries instantly — no smearing. Four colors. Replacement tips available. STOCK# COLOR RESISTANT MIN. TO ORDER EACH QTY. PRICING/PRICE PER MARKER: 144 576 1440 2880 Mark-X Markers 0911-000 0921-000 0931-000 0930-011 0930-010 Black 500°F 12 Red 300°F 12 Blue 600°F 12 Tip, Std Felt BulletPACK OF 12 Tip, Felt Chisel PACK OF 12 $2.00 2.00 2.00 6.00 6.00 $1.90 1.90 1.90 $1.80 1.80 1.80 $1.60 1.60 1.60 $1.40 1.40 1.40 You may combine colors to reach bracket pricing. Must order in quantities of 12. Items bearing this symbol cannot be shipped by air. 6 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww PAINT MARKERS 2018P Valve-Action Marker Heavy-duty pigmented paint will mark on most surfaces. Replaceable bullet tip and airtight cap. STOCK# MIN. QTY. PRICING/PRICE PER MARKER: RESISTANT TO ORDER EACH 144 576 1440 2880 COLOR 2018P Marker 0940-001 0940-002 0940-006 0940-007 0940-008 0940-009 0940-010 0940-013 0940-014 0958-401 0940-018 Black 600°F Blue 500°F Light Green 600°F Green 600°F Orange 500°F Pink 500°F Red 500°F White 500°F Yellow 500°F Tip, Replacement Tip, Taper Down 12 12 12 12 12 12 12 12 12 PK/12 PK/12 $2.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 6.00 6.00 $2.47 2.47 2.47 2.47 2.47 2.47 2.47 2.47 2.47 $2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.34 $2.08 $1.82 2.08 1.82 2.08 1.82 2.08 1.82 2.08 1.82 2.08 1.82 2.08 1.82 2.08 1.82 2.08 1.82 SEE RESISTANT TEMPERATURES ON CHART You may combine colors to reach bracket pricing. Must order in quantities of 12. Items bearing this symbol cannot be shipped by air. FOR BEST RESULTS: Shake marker until you hear the agitator. Then, twist the cap off and gently pump until the nib is inked. 563 Speedry Paint Markers Valve action with acrylic replacement tip. Easy to hold 9/16” diameter aluminum barrel. Airtight color-coded cap fits on recessed end of the barrel. Opaque, fast drying permanent paint. Replacement tips available. STOCK# COLOR MIN. QTY. PRICING/PRICE PER MARKER: RESISTANT TO ORDER EACH 144 576 1440 2880 563 Speedry Paint Marker 0950-001 0950-002 0950-003 0950-004 0950-013 0950-007 0950-005 0950-006 0950-016 0950-008 0950-009 0950-010 0950-011 0950-012 0958-401 0940-018 Black 600°F Blue 500°F Dark Blue 500°F Light Green 600°F Green 600°F Red 500°F Orange 500°F Purple 500°F Pink 500°F Light Violet 500°F White 500°F Yellow 500°F Silver 800°F Gold 500°F Tip, Replacement Tip, Taper Down 12 12 12 12 12 12 12 12 12 12 12 12 12 12 PK/12 PK/12 $2.40 $2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.60 2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.40 2.28 2.60 2.47 2.60 2.47 6.00 6.00 $2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.16 2.34 2.34 $1.92 $1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 1.92 1.68 2.08 1.82 2.08 1.82 You may combine colors to reach bracket pricing. Must order in quantities of 12. 7 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Industrial Markers CAPILLARY ACTION MARKERS Perma-Line® Capillary-Action A fine line marker that makes a permanent mark. Resists wear to assure a fine point for the life of the marker. Ideal for non-porous surfaces. Dries quickly. Available in black. Jumbo Insta-Marker® Capillary-Action Features a chisel-point for variable-size marking. Provides an instant, waterproof, permanent mark on porous and most non-porous surfaces. Available in black. Perma-Line Markers for marking on non-porous surfaces. STOCK# COLOR QTY.PRICING / PRICE PER MARKER: MIN. ORDER 12 CTN 144 CTNS Jumbo Insta-Marker 0912-110 Black 12/Ctn 1.40 $1.30 12/Ctn 1.10 $1.00 Perma-Line Marker 0912-106 Black Items bearing this symbol cannot be shipped by air. Jumbo Insta-Marker pens for marking on porous and non-porous surfaces. REFILLABLE MARKERS Control-Flo™ MH6 Marker Refillable Valve-Action Marker Refillable Valve-Action This refillable, valve-action marker makes a bold mark on most surfaces. The Control-Flo Marker’s large ink capacity results in a low cost per mark. Marker measures 7-1/2" (190.5 mm) overall. Replaceable felt tip. Use with Insta-Dry and Stikfast ® inks listed on page 17. The ultimate valve action refillable marker was designed with the industrial user in mind. It is equipped with a holster which also acts as a cap, so you can use it with your gloves on. Heavy duty, bullet shaped replaceable felt tip. Anodized aluminum finish barrel is 6" long and holds 22ml of ink (3/4 oz) Control-Flo™ Marker Refillable! STOCK# DESCRIPTION QTY.PRICING / PRICE PER MARKER: MIN. ORDER 1 CTN Control-Flo Marker 0905-100 0905-067 n/a Tips STOCK# DESCRIPTION QTY.PRICING / PRICE PER MARKER: MIN. ORDER 1 CTN MH6 Refillable Marker 1 Marker Pack of 12 $22.50 each 25.20 each 0906-001 0906-003 W/Holster Tips, Round Pack of 12 $35.00 each 16.80 8 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 Stencil Machines 6 SC-5 ELECTRONIC STENCIL MACHINE Stencil Machine SC-5 is the most advanced stencil system available and it is sold at a price that is less than a large character manual stencil machine. Cut characters 1/8” and up. Unique knife saving technology, extra-wide 29” bed, easy to use keypad make this machine appealing. Cuts .010 & .015 stencil board, heavy duty polyester, magnetic vinyl, .008 white polyethylene film (Ultra Cut). Stencil-Cad Basic 7.1 software offers new “WYSIWYG” (what you see is what you get) screen, and it includes hundreds of fonts, international shipping symbols, Military Government and Cyrillic fonts. Import files from many Windows based programs. Poly-NT Improved to cut .015 stencil board STOCK# MEDIA SHIP WEIGHT PRICE SC-5 ELECTRONIC STENCIL MACHINE KITS 7901-000 7902-000 7903-000* 7904-000* Kit, Electronic SC5 w/Oilboard Kit, Electronic SC5 w/UltraCut Kit, SC5 Classic w/Oilboard Kit, SC5 Classic w/UltraCut 112 112 112 112 $3,950.00 3,950.00 5,200.00 5,200.00 7900-003 7900-005 7900-007 7900-008 7900-010 7900-101 SC-5, Cutter Stand SC-5 Classic 7.1 Software SC-5 Carbide Blade 45 Deg SC-5 Carbide Blade 60 Deg SC-5, Basic 7.1 Software SC-5, 90 Deg Cutting Strip 42 $400.00 1800.00 25.00 25.00 495.00 90.00 STOCK# MEDIA ACCESSORIES Improved to cut .015 stencil board Kit Components SC5 Kit 7901-000 contains: SC5 Cutter Cutter Stand Basic 7.1 Software 2-60° Cutting Blades 3" Oneshot Assembly 1 Oneshot Cartridge 2 Rolls of Stencil Board 10 sheets of .015 24" x 36" Stencil Board SC5 Kit 7902-000 contains: SC5 Cutter Cutter Stand Basic 7.1 Software 2-60° Cutting Blades 3" Oneshot Assembly 1 Oneshot Cartridge 2 Rolls of Ultra Cut 10 sheets of .015 24" x 36" Stencil Board SHIP WEIGHT PRICE SC-5 ELECTRONIC STENCIL MACHINE CUTTING MEDIA Shipping Weights for Kit Componets: SC-5: 42 lbs Stand: 42 lbs Board: 28 lbs Totaling 112 lbs. Ultra-CutTM 7910-003 7910-001 7910-002 7920-001 7920-002 7930-001 7930-002 7930-003 7940-001 7940-007 7940-009 Stencil Roll 20" x 100' Rolls 2/Cs .010 28 Stencil Bd 12" x 24" - 50# .010 50 Stencil Bd 24" x 36" - 50# .010 50 Poly-NT 13.5" x 100' Per Roll Poly Extra 18" x 100' Per Roll Ultra-Cut™ Poly 22.5" x 100' 2Pk 26 Vinyl, Magnetic 24" x 50' Stencil, Mask 15" x 50 Yds Vinyl, Black Inter 15" x 50 Yds Vinyl, White Inter 15" x 50 Yds Vinyl, Trfer Tape 14" x 100 Yds $130.00 104.00 104.00 166.00 213.00 225.00 199.00 190.00 79.00 79.00 69.00 * Classic 7.1 Sofware allows the importing of company logos, artwork, bitmaps and sequential numbering. 9 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Stencil Machines SAMPLE CHARACTER CHART STENCIL MACHINES 1/4" Stenciling is a quick, cost-effective way to mark products for shipment or to identify plant areas. It is also convenient for creating directional signs. (6.35 mm) Diagraph stencil machines have been the industry standard since we invented the stencil cutter in 1893. Today we manufacture stencil cutters using leading-edge manufacturing systems and techniques. (12.7 mm) 1/2" Our Stencil Machines are: • Covered by a one-year warranty on parts. • Our 1/2", 3/4" and 1" Standard Machines can be specifically retrofitted to cut mylar for an additional $100 charge. 3/4" (19.05 mm) 1" (25.4 mm) Stencil Machine Kit Jumbo Stencil Machine (kit items not shown) Items bearing this symbol require extended manufacturing lead times. STOCK# MODEL LETTER HEIGHT LETTERS PER FT. MAX. # OF LINES SHIP WEIGHT 81 48 22 15 15 9 14 10 6 4 4 4 90 90 90 90 90 220 HEIGHT OF MAX. # OF LINES PRICE EACH Stencil Cutters Kits(Standard) 0101-000K 1/8" Stencil Machine 0102-000K 1/4" Stencil Machine 0104-000K 1/2" Stencil Machine 0105-000K 1" Stencil Machine 0107-000K 3/4" Stencil Machine 0120-000K 2" Jumbo Stencil Machine 1/8" (3.18 mm) 1/4" (6.35 mm) 1/2" (12.7 mm) 1" (25.4 mm) 3/4" (19.05 mm) 2" (50.8 mm) 4-1/8" (104.78 mm) 4-1/8" (104.78 mm) 4-1/2" (114.3 mm) 5" (127 mm) 4-1/2" (114.3 mm) 11-5/8" (295.28 mm) $4,515.00 1,510.00 1,510.00 1,510.00 1,510.00 5,775.00 Priced in U.S. Dollars. Stencil machine kits contain stencil machine, 3" Oneshot Assembly, a Black Oneshot Cartridge and 25 sheets of 6.5 x 20 .015 natural stencil board. To avoid shipping damages, ship via truck. 10 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww Stencil Board Selector Guide NUMBER OF LINES TO BE CUT: 1 2 3 4 5 STENCIL BOARD HEIGHT REQUIRED: LETTER HEIGHT for letters 1/4" and larger Diagraph Stencil Board is processed with a special formula of doubleboiled linseed oil, cured in our own plant and cut with-the-grain for extra rigidity. It lubricates with each cut, extending the life of your stencil machine, and resists ink absorption so the same stencil can be used many times. 1/4" (6.35 mm) 1/2" (12.7 mm) 3/4" (19.05 mm) 1" (25.4 mm) 1-3/4" (44.45 mm) 2" (50.8 mm) STOCK# SHEET SIZE (H X W) 4" 4" 4" 4" 4" 4" 4" 4" 4" 5" 6-1/2" 7" 4" 4" 5" 6" 11" 11" SHEETS/PACK* 4" 5" 6-1/2" 6-1/2" 11" 11" 1 4" 6" PRICE/PACK 5 6 5" 6-1/2" Stencil Board .015" NATURAL STENCIL BOARD 10 Dispensa-Pak Stencil Board - (23 lbs.) .015 Natural 0740-201 0750-201 0760-201 0765-201 0765-241 0770-201 0770-241 4" x 20" DAP .015 (101.6 mm X 508 mm) 5" x 20" DAP .015 (127 mm X 508 mm) 6" x 20" DAP .015 (152.4 mm x 508 mm) 6-1/2" x 20" DAP .015 (165.1 mm x 508 mm) 6-1/2" x 24" DAP .015 (165.1 mm x 609.6 mm) 7" x 20" DAP .015 (177.8 mm x 508 mm) 7" x 24" DAP .015 (177.8 mm x 609.6 mm) 450 350 300 250 250 250 250 $58.50 58.50 58.50 58.50 58.50 58.50 58.50 $51.50 51.50 51.50 51.50 51.50 51.50 51.50 $49.50 49.50 49.50 49.50 49.50 49.50 49.50 750 1050 550 800 650 350 750 650 500 550 500 300 200 200 150 100 100 $93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 105.00 $90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00 $85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 85.50 Parcel-Pak Stencil Board - (50 lbs.)** .015 Natural Our stencil board is ideal for flat or curved surfaces. Canary Yellow Stencil Board Canary yellow stencil board has been sold for 90 years as the premium quality board, for use with all stencil cutting machines (7/16" and larger) and also for hand cutting large stencils, patterns and other industrial applications. 0730-364 0740-204 0740-364 0750-204 0760-204 0760-364 0765-164 0765-204 0765-244 0770-204 0770-244 0780-364 0780-484 0711-364 0712-484 0724-364 0724-404 0714-015 3" x 36" PP .015 (76.2 mm x 914.4 mm) 4" x 20" PP .015 (101.60 mm x 508 mm) 4" x 36" PP .015 (101.6 mm x 914.4 mm) 5" x 20" PP .015 (127 mm x 508 mm) 6" x 20" PP .015 (152.4 mm x 508 mm) 6" x 36" PP .015 (152.4 mm x 914.4 mm) 6-1/2" x 16" PP .015 (165.1 mm x 406.4 mm) 6-1/2" x 20" PP .015 (165.1 mm x 508 mm) 6-1/2" x 24" PP .015 (165.1 mm x 609.6 mm) 7" x 20" PP .015(177.8 mm x 508 mm) 7" x 24" PP .015 (177.8 mm x 609.6 mm) 8" x 36" PP .015 (203.2 mm x 914.4 mm) 8” x 48" PP .015 (203.2 mm x 1,219.2 mm) 11" x 36" PP .015 (279.4 mm x 914.4 mm) 12" x 48" PP .015 (304.8 mm x 1,219.2 mm) 24" x 36" PP .015 (609.6 mm x 914.4 mm) 24" x 40" PP .015 (508 mm x 1,016 mm) Non Standard Sizes STOCK# SHEET SIZE (H X W) SHEETS/PACK* 1 PRICE/PACK 5 10 Parcel-Pak Stencil Board (50 lbs) .015 Yellow 3765-204 3770-244 3724-364 3790-001 Sten Bd, Yel 6.5 X 20 .015 PP Sten Bd, Yel 7 X 24 .015 PP Sten Bd, Yel 24 x 36 .015 PP Sten Bd, Yel Non Std .015 PP* 650 500 100 110 $97.90 97.90 97.90 105.00 $94.75 94.75 94.75 $89.95 89.95 89.95 0760-186 Sten Bd, Yel .007 6 x 18 PP 1,000 $131.90 0765-246 Sten Bd, Yel .007 6.5 x 24 PP 200 131.90 0724-367 Sten Bd, Yel .007 24 x 36 PP 200 131.90 0716-065 Sten Bd, Yel .007 Non Standard PP 150.00 *Approximately ** Non-Standard Sizes Available — Extended Lead Time. Call for Pricing and Delivery. $1 27.60 127.60 127.60 $121.20 121.20 121.20 .007 Yellow Stencil Board Parcel Pak (50#) Priced in U.S. Dollars. 11 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Stencils & Packing Envelopes CUSTOM CUT STENCILS Your logo or other graphic image can be cut in reusable mylar film or oilboard. Allow 1-2 weeks for delivery. Call for more information. Custom Mylar Stencils Our polyester film is super tough and impervious to inks and most acids or chemicals. Custom Oilboard Stencils Custom Oilboard stencils are cut from Diagraph stencil board. 100% recycled fibers. Disposable; biodegradable. Custom 55-gallon (208.18 L) drum-head stencils are available only in mylar. Items bearing this symbol require extended lead times Universal symbols can be cut in mylar or oilboard to almost any size you need. PACKING LIST ENVELOPES Diagraph Packing List Envelopes ensure protection of shipping papers from weather damage and loss. Convenient back-loading feature gives an added measure of safety. 1841-606 1841-601 1841-602 STOCK# DESCRIPTION OVERALL SIZE INCHES METRIC PRICE PER THOUSAND (M) 1M 3M 5M Packing List Enclosed 1841-601 1841-602 1841-605 Solid Transparent Transparent 4-1/2" x 6" (114.3 mm x 152.4 mm) $35.15 4-1/2" x 6" (114.3 mm x 152.4 mm) 35.15 7-1/2" x 5-1/2" (190.5 mm x 139.7 mm) 49.45 $31.35 31.35 41.25 $29.65 29.65 39.55 Blank 5-1/2" x 10" $51.15 $50.55 Others 1841-605 1841-606 (139.7 mm x 254 mm) $61.55 Priced in U.S. Dollars. 12 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 The Oneshot Kit includes everything you need to get started. • Assembly • Ink Cartridges • Roller Cover STOCK# DESCRIPTION PRICE EA Oneshot® Kits 6 ® ONESHOT STARTER KIT Oneshot Kit 2700-865 Oneshot Roller Kit w/8 Cartridges 2700-881 Oneshot 3" Kit w/1 Cartridge $65.00 39.50 The Oneshot System Oneshot Kits Diagraph’s Oneshot Kit offers great stenciling value! The kit comes with everything you need to get started including: • 3" (76.2 mm) roller assembly • Eight GS black ink cartridges • Roller cover Oneshot Roller Assembly Oneshot Brush Assembly Oneshot Kit with Black GS Series Ink Oneshot Ink Cartridges 13 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Oneshot® Kits ONESHOT ® STENCIL APPLICATORS Our patented Diagraph Oneshot stencil system offers you a flexible, portable and convenient means of stenciling on both porous and nonporous surfaces. HOW TO USE The Oneshot System Step 1: Insert the Oneshot roller or brush unit into the ink cartridge. This action pierces the polypropylene membrane in the cartridge, allowing ink to flow into the applicator. • • • • • Easy stenciling for rough and smooth surfaces. Convenient for remote job sites. No-mess, durable ink cartridge is fully disposable. Meets U.S. Government ink specifications. Available in seven high-visibility, CONEG certified and SARA compliant inks. • Replaceable neoprene roller and plastic cover in two convenient sizes. • Natural bristle brush. Step 2: Oneshot Roller & Brush Assemblies Shake gently. Press the ink valve button to dispense ink internally through the applicator. Begin stenciling on any porous or non-porous surface. For rough or uneven surfaces, try our Oneshot Brush. The Oneshot roller or brush twists onto a specially designed ink cartridge–creating an easy-to-use stenciling tool. The ink saturation is controlled by a valve-action pump in the assemblies. The Roller Assembly features a durable neoprene roller and the Brush Assembly uses 100% natural bristles set in epoxy to assure long-lasting performance. There’s no messy refill, simply attach a new cartridge when you run out of ink. Oneshot Ink Cartridges Choose from seven high-visibility colors–for porous and non-porous surfaces. All Oneshot stencil inks are CONEG certified and SARA compliant. Minimum order is eight cartridges–about one liter of ink. STOCK# INK CONDITIONER DESCRIPTION PRICE Oneshot Kits Assembly Kits For Stencil Rollers and Pads Extends stencil roller and ink pad life by preventing them from drying out. Adds ink mileage by maintaining the proper ink consistency. 2700-865 2700-881 Oneshot Roller Kit w/8 Black Cartridges Oneshot 3" Kit w/1 Black Cartridge $65.00 39.50 Replacement Parts Use with all stencil rollers and pads. 2700-810 2700-809 2700-811 2700-807 2700-808 0603-802 Oneshot Roller Assembly–1-1/2" (38.1 mm) Oneshot Roller Assembly–3" (76.2 mm) Oneshot Brush Assembly 3" Replacement Roll �N’ Oneshot/HV Replacement Roller–1-1/2" (38.1 mm) Replacement Lid and Cover (for rollers) $39.50 39.50 30.00 11.45 11.45 6.00 All products priced per each. Minimum order applies. Priced in U.S. Dollars. STOCK# COLOR Extend your stencil rollers with Ink Conditioner COLOR STOCK# MINIMUM ORDER QTY. PRICING/PRICE EACH: 1 EACH 12 EACH 24 EACH Conditioner for Stencil Inks Conditioner 0502-008 0504-008 1 Quart (.9475 L) $13.00 1 Gallon (3.79 L) 39.00 Use chart on page 18 for conditioner. $12.35 $ 11.70 27.05 35.10 QTY. PRICING/PRICE PER CARTRIDGE: MINIMUM ORDER 1CTN 6CTNS Oneshot Ink Cartridges 2700-864 2700-869 2700-872 2700-883 2700-871 2700-882 2700-849 GS-1 Black GS-2 Red GS-3 White GS-7 Green S-22 Yellow* S-25 Orange* S-6 Blue* 1 Ctn 1 Ctn 1 Ctn 1 Ctn 1 Ctn 1 Ctn 1 Ctn $4.50 4.75 4.75 4.75 4.75 4.75 4.75 $4.30 4.50 4.50 4.50 4.50 4.50 4.50 * Meets Government Specifications except for color match. Available in full carton quantities only. Packed 8 cartridges to a carton. Price per cartridge. Minimum order applies. Priced in U.S. Dollars. Items bearing this symbol cannot be shipped by air. 14 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww Oneshot® Stencil Applicators STENCIL APPLICATORS Rol-It-On® System For All Surfaces Our most economical system for marking on both porous and non-porous surfaces. Use the refillable Rol-It-On ink pad to ink the roller prior to stenciling. • For porous surfaces use a latex roller and R ink or use a Type N Roller with SK-1 ink • For non-porous surfaces order a neoprene Type N roller and S or GS ink. • Use the GS Kit to meet U.S. Government specifications when stenciling on porous or non-porous surfaces. HV System For Porous & Non-Porous Surfaces • For non-porous and difficult-to-mark surfaces such as plastic, vinyl, glass and metal. • Refillable, four-ounce (118.3 ml) handle. Designed for heavier pigmented inks. • Use with S and GS type inks. Rol-It-On System for all surfaces Rol-Flo® System For Porous Surfaces • Provides economical and fast non-stop marking. • Refillable, four-ounce (118.3 ml) plastic handle holds enough ink to mark up to 5,000 three-line address impressions. • Use with R type ink. See Page 18 for ink guide for these stencil applicators and their kits. STENCIL APPLICATOR KITS Get started with our economical Stencil Applicator Kits that come with everything you need to get started. Rol-It-On Kit • 3" (76.2 mm) roller assembly (latex or neoprene) with roller cover • 3" (76.2 mm) Rol-It-On ink pad • One quart (.9475 L) of R or S black ink Rol-Flo Kit • 3" (76.2 mm) latex roller assembly with roller cover • One quart (.9475 L) of R black ink Oneshot® Kit • 3" (76.2 mm) roller assembly with roller cover • Eight GS black ink cartridges HV System for non-porous surfaces Multi-Purpose Ink Multi-Purpose Ink Replaces S-3 White Ink Available in Quart and Gallon See Page 17 for more information MODEL M STENCIL BRUSH This refillable stenciling brush is perfect for rough, porous surfaces Bristles are set in epoxy for long-lasting performance with solvent-based inks. Easy-to-use side button releases ink. 7-1/2" (190.5 mm). Use with Insta-Dry, GS-1 Black Ink and SK-1 inks on page 17. Model M Replacement Brush Tips These replacement brush tips allow you to change worn-out brush-heads without replacing the Model M body. Model M Stencil Brush and Replacement Brush Tip 15 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Rol-It-On Kits PRICE EA DESCRIPTION STOCK# Rol-It-On Kit 0411-300 Kit with R-1 black ink 0412-301 Kit with S-1 black ink $45.00 45.75 Rol-Flo Kit 0611-300 Kit with R-1 black ink $74.20 Model M Stencil Brush 0908-000 Stencil Brush 0908-801 Replacement Brush Tip $37.50 12.00 Priced in U.S. Dollars. Items bearing this symbol cannot be shipped by air. See page 13 & 15 for more information on the Oneshot System. Stencil Inks sold on page 17. STOCK# Rol-Flo System for porous surfaces PRICE EACH SIZE MINIMUM ORDER 1-1/2" (38.1 mm) 3" (76.2 mm) 1-1/2" (38.1 mm) 3" (76.2 mm) 3" (76.2 mm) 3" (76.2 mm) 1 1 1 1 1 1 $21.80 21.80 15.00 15.00 61.90 50.00 Rol-It-On Roll Latex 1-1/2" (38.1 mm) Rol-It-On Roll Latex 3" (76.2 mm) Rol-It-On Roll Type N 1-1/2" (38.1 mm) Rol-It-On Roll Type N 3" (76.2 mm) 3" Replacement Roll �N’ Oneshot & HV (76.2 mm) Rol-Flo Roll Latex 3" (76.2 mm) 2 2 2 2 $15.80 15.80 9.50 9.50 2 2 11.45 15.80 2 $9.00 DESCRIPTION ROLL TYPE Stencil Applicator Systems 0408-103 0408-101 0405-103 0405-101 0603-801 0601-803 Rol-It-On Assembly Latex Rol-It-On Assembly Latex Rol-It-On Assembly Type N Rol-It-On Assembly Type N HV Assembly Type N Rol-Flo Assembly Latex 3" rollers are available in latex or neoprene. Replacement Rolls 0408-104 0408-102 0405-104 0405-102 2700-807 0408-102 Rol-It-On Ink Pads 0408-201 3" Regular Ink Pad n/a 3-1/2" x 7" (88.9 mm x 177.8 mm) Rol Flo Maintenance Kit 0601-800 Contains Washer, Transfer Felt & Ink Check Plug $7.50 All products priced per each. Minimum order applies. Priced in U.S. Dollars. Rol-It-On Kit with Black R or S Series Ink Select your ink and applicator based on the type of surface you need to mark. Inks are sold on page 18 and 19. Selection Guide For Stencil Applications Diagraph offers a wide variety of stencil applicators and inks to mark almost any surface. Use this chart and the one on page 16, or call for assistance, when selecting an applicator and ink. SYSTEM POROUS NON-POROUS SURFACES SURFACES Rol-It-On® Roller Rol-Flo® Roller HV Roller Model M Brush Oneshot® Roller/Brush Aerosols • • • • • • • • • • COMPATIBLE INK TYPE(S)* INK SUPPLY PAGE R, S, GS **, & Multi Purpose Inked by rolling on ink pad 16 R & Multi Purpose Refillable ink reservoir 16 S, GS, & Multi Purpose Refillable ink reservoir 16 SK-1, Insta-Dry Refillable ink reservoir 16 GS Oneshot® Disposable ink 14 - 15 Cartridges cartridges Quik-Spray® Aerosol spray ink 19 * See page 18 for more information about stenciling inks ** GS inks meet U.S. Government Specifications TT-1-1795A and CIDA-A-208 Type IV 16 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 S Series Ink - Qt STOCK # We have the ink type and color to match your application, your stenciling system and any specifications you may need to meet. Our stencil inks meet CONEG and SARA standards and GS Series inks are formulated to meet U.S. Government Specifications TT-I-1795 A and CID A-A-208 Type IV. STOCK # DESCRIPTION QUANTITY LIST PRICE 12 24 Black 6/Ctn $13.50 $12.83 $12.12 4 8 0812-110 DESCRIPTION QUANTITY LIST PRICE Black Red 4/Ctn 4/Ctn $40.00 50.00 $38.00 47.50 $36.00 45.00 QUANTITY LIST PRICE 12 24 6/Ctn $21.00 $19.95 $18.90 QUANTITY LIST PRICE 12 24 6/Ctn $15.80 $15.01 $14.22 QUANTITY LIST PRICE 4 8 $40.38 $38.25 0814-110 0824-110 DESCRIPTION 0812-080 Black - Quart DESCRIPTION 0810-011 SK-1 Black SK Ink - GAL STOCK # DESCRIPTION 0810-013 SK-1 Black - Gal 4/Ctn 0810-014 SK-1 Black - 50 Gal $42.50 LIST PRICE 2 3 1,675.00 1,591.25 1,507.50 R Series Ink - Qt STOCK # DESCRIPTION 0512-001 0522-003 R-1 Black R-22 Red QUANTITY LIST PRICE 12 24 6/Ctn 6/Ctn $18.50 24.00 $17.58 22.80 $16.65 21.60 DESCRIPTION 0514-001 0524-003 R-1 B lack R-22 Red QUANTITY LIST PRICE 4 8 4/Ctn 4/Ctn $59.50 77.00 $56.53 73.15 $53.55 69.30 R Series Ink - 5 GAL STOCK # DESCRIPTION 0515-001 0524-006 R-1 Black R-22 Red DESCRIPTION 0516-007 QUANTITY LIST PRICE 4 8 S-1 Black 4/Ctn $65.00 $61.75 $58.50 S-3 White - Replaced by Multi-Purpose Ink (See Below) S-6 Blue 4/Ctn 77.00 73.15 69.30 DESCRIPTION 0516-008 LIST PRICE S-1 Black 2 3 $2,450.00 $2,327.50 $2,205.00 Rol-It-On Conditioner- Qt DESCRIPTION 0502-008 Quart QUANTITY LIST PRICE 12 24 6/Ctn $13.00 $12.35 $11.70 Rol-It-On Conditioner - GAL DESCRIPTION 0504-008 Gallon QUANTITY LIST PRICE 4 8 4/Ctn $39.00 $37.05 $35.10 0506-007 50 Gallon Drum LIST PRICE 2 3 1,750.00 1,662.50 1,575.00 GS Series Ink - Qt STOCK # DESCRIPTION 0510-001 0510-101 0552-008 0510-701 0552-007 0572-005 LIST PRICE 4 8 $269.00 $255.55 $242.10 LIST PRICE 2 3 STOCK # GS-1 Black** GS-2 Red** GS-3 White** GS-7 Green** S-22 Yellow*** S-25 Orange*** R-1 Black DESCRIPTION 0510-002 0510-102 0554-009 0510-702 0554-008 0574-005 R Series Ink - 50 GAL STOCK # 24 QUANTITY LIST PRICE 12 24 6/Ctn 6/Ctn 6/Ctn 6/Ctn 6/Ctn 6/Ctn $20.50 24.00 24.00 27.00 24.00 27.00 $19.48 22.80 22.80 25.65 22.80 25.65 $18.45 21.60 21.60 24.30 21.60 24.30 QUANTITY LIST PRICE 4 8 4/Ctn 4/Ctn 4/Ctn 4/Ctn 4/Ctn 4/Ctn $65.00 77.00 77.00 80.00 77.00 80.00 $61.75 73.15 73.15 76.00 73.15 76.00 $58.50 69.30 69.30 72.00 69.30 72.00 GS Series Ink - GAL R Series Ink - GAL STOCK # STOCK # STOCK # SK Ink - Qt STOCK # DESCRIPTION 0514-002 0584-002 0534-002 STOCK # Stickfast Ink STOCK # 12 S Series Ink - 50 GAL Insta-Dry Stencil Ink - GAL STOCK # LIST PRICE S-1 Black 6/Ctn $20.50 $19.48 $18.45 S-3 White - Replaced by Multi-Purpose Ink (See Below) S-6 Blue 6/Ctn 24.00 22.80 21.60 S Series Ink - GAL Insta-Dry Stencil Ink - Qt STOCK # DESCRIPTION 0512-002 0582-002 0532-002 Stenciling Inks 6 STENCILING INKS GS-1 Black** GS-2 Red** GS-3 White** GS-7 Green** S-22 Yellow*** S-25 Orange*** **Meets U.S. Government specifications. ***Meets U.S. Government specifications except for color match. $1,950.00 $1,852.50 $1,755.00 MULTI-PURPOSE INK ! NEW • Meets lowest VOC requirements and Government specifications. • Longer lasting mark. • Better adhesion to non-porous surfaces such as plastic and metal. • Ideal for all non-porous and porous materials. • Fast dry time. • Prolongs the life of your ink roller. • Lower HMIS Flammability Rating (2). • Saves on freight (Not considered flammable if shipping ground). Replaces S-3 White Ink Multi-Purpose Ink STOCK # 0582-002 STOCK # 0584-002 DESCRIPTION White (Quart) DESCRIPTION White (Gal) QUANTITY EACH 12 6/Ctn $24.00 $22.80 QUANTITY EACH 4 4/Ctn $77.00 $73.15 24 $21.60 8 $69.30 Multi-Purpose Ink Replaces S-3 White Ink Available in Quart and Gallon 17 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Stencil Inks Stenciling Ink Guide STENCIL INK PIGMENTED Conditioner n/a GS Series Ink • S Series Ink • • Insta-Dry Ink • Stikfast® Ink Multi-Purpose Ink n/a • R Series Ink SK-1 Ink DYE • • FOR USE WITH POROUS NON-POROUS SURFACES SURFACES All stencil rollers and ink pads Rol-It-On® & Rol-Flo® with Latex roller HV and Rol-It-On with Type N roller HV and Rol-It-On with Type N roller Model M Brush and Control-Flo Marker Model M Brush & Type N roller Control-Flo & MH6 Markers Rol-It-On®, HV & Rol-Flo® n/a n/a • • • • • • • • • • • SPECIAL PROPERTIES Prevents roller and pad dry-out. Helps maintain proper ink consistency. Dries instantly on most surfaces to a permanent matte finish; oil-, water- and fade-resistant when dry. Formulated to meet U.S. Government specs TT-I-1795A and CID A-A-208 Type IV. Lightfast. Resistant to oil, water, and some solvents after drying. Requires agitation. Dries instantly on most surfaces to a permanent matte finish; oil-, water-, and fade-resistant when dry. Lightfast. Resistant to oil, water and some solvents after drying. Requires some agitation. Dries to a permanent semi-gloss finish on most surfaces; oil-, water-, and fade-resistant when dry. Meets Government specs Meets Lowest VOC Requirements Fast Dry for Porouts/Non-Porous Silicone Lubricant SILICONE • Food Grade (Allow solvent to evaporate before incidental food contact) • Lubricate doors, wheels and other moving parts • Clean and shine metal surfaces • Use on molds and finishing tables to prevent sticking • Includes directional tube (as shown below) for hard-to-reach areas • Non-fluorocarbon propellant, no CFCs or ODCs • 13 ounces (368.55g) net weight. Ink Cleaner A general -purpose ink remover in a 12 oz net wt. Aerosol can. Very effective on coder wheels, rubber type, stencil rollers and brushes. Silicone application with the thin directional tube attached to narrow the spray STOCK# COLOR QTY. PRICING/PRICE EACH: 24 CANS 72 CANS 144 CANS MINIMUM ORDER 12 CAN 12 Cans $6.99 $6.50 $6.01 $5.52 $5.03 12 Cans $5.60 $5.21 $4.82 $4.42 $4.03 288 CANS Quik-Spray Silicone 1503-148 Silicone Ink Cleaner 1500-155 n/a Additional quantity discounts available on all aerosols. Call for details. Quik-Spray/Aerosols packed 12 cans to a carton. Price per can. Minimum order applies. Priced in U.S. Dollars 1901-398 $8.50 18 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww Quik-Spray® QUIK-SPRAY® AEROSOLS Marking Inks These opaque aerosol inks are great for stenciling or color coding. Quik-Spray inks dry in just 30 to 60 seconds. • All ink formulations comply withCONEG legislation. • Environmentally safe, non-fluorocarbon propellant. • New VOC compliant formula. Contains no CFCs • Available in seven high-visibility colors. • 11.5 ounces (326 g) net weight. Blockout Inks Cover-up unwanted marks on cartons so they can be reused. • Blockout ink dries quickly and is oil- and water-resistant. • Use on porous or non-porous surfaces. • 11.5 ounces (326 g) net weight aerosol cans (shown). • Also available in one- or five-gallon (3.79 L or 18.93 L) pails for large-volume usage. • New VOC compliant formula. Contains no CFCs Quik-Spray Marking Inks for product identification and color coding Marking inks are available in 7 Great Colors BLOCKOUT Opaque aerosol inks are great for stenciling or color coding. Quik-Spray inks dry in just 30 to 60 seconds. STOCK# QTY. PRICING/PRICE EACH: 72 CANS MINIMUM ORDER 12 CAN 24 CANS Black Red Blue Green Yellow White Orange 12/Ctn 12/Ctn 12/Ctn 12/Ctn 12/Ctn 12/Ctn 12/Ctn $5.05 5.60 5.25 5.25 5.25 5.25 5.25 $4.70 5.21 4.88 4.88 4.88 4.88 4.88 $4.34 4.82 4.52 4.52 4.52 4.52 4.52 $3.99 4.42 4.15 4.15 4.15 4.15 4.15 $3.64 4.03 3.78 3.78 3.78 3.78 3.78 Tan White 12 Cans 12 Cans $5.25 5.60 $4.88 5.21 $4.52 4.82 $4.15 4.42 $3.78 4.03 COLOR 144 CANS 288 CANS Quik-Spray Aerosol Inks 1513-155 1523-155 1533-155 1543-155 1553-155 1563-155 1573-155 Blockout Aerosol 1593-157 1563-157 Blockout Liquid Inks - Water Soluble 0894-010 Tan 1 Gal. (3.79 L) pail $36.50 Additional quantity discounts available on all aerosols. Call for details. Quik-Spray/Aerosols packed 12 cans to a carton. Price per can. Minimum order applies. Priced in U.S. Dollars 19 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Hand Duplicators HAND DUPLICATORS Diagraph hand duplicators are an excellent, low-cost solution for repetitive address marking. We offer duplicators with either a disposable or a refillable ink supply. Both utilize extra strong clamps to hold the stencil in place and prevent slipping or wrinkling. Rocker Model Duplicators Our Rocker Model Hand Duplicators feature a cloth-covered neoprene pad for clear marks on uneven surfaces. A built-in refillable reservoir assures excellent ink distribution throughout the pad. Flat-Clamp Duplicators Flat-Clamp Duplicators feature ink-in-the-handle convenience with our unique SiphonFlo® disposable inking system. The enclosed ink reservoir assures no-mess ink distribution. Good for remote location addressing–just carry extra Siphon-Flo ink bottles. Rocker Model Duplicator (above left) and Flat-Clamp Duplicator with carton application easily identify your product. Plain Stencils For Duplicators Our Standard S stencils feature a heavy backing sheet and extra-strength blue stencil for ball point pen or typewriter preparation. DUPLICATOR INKS P Series Inks Replacement Pads PRICE EA. MIN. ORDER STOCK# For Rocker Model Duplicators Use these high-viscosity inks to mark on porous surfaces with our Rocker Model Hand Duplicators. Available in black with plastic spout for easy refill. MODEL ® Siphon-Flo Inks Rocker Replacement Pads 1624-801 1626-801 R-3146 R-4260 1 Pad 1 Pad $23.95 32.15 Flat-Clamp Replacement Pads 1647-801 FC-3146 1 Pad $21.45 For Flat-Clamp Duplicators Ink-in-the-handle bottle makes marking fast and easy and saves ink too. Insert another bottle to replenish your ink supply. Priced in U.S. Dollars. STOCK# MINIMUM ORDER COLOR QTY. PRICING/PRICE EA: 1 EACH 12 CTN P Series Inks (for Rocker Model Duplicators) 2011-600 P-1 Black 1 Pint (.47 L) $12.10 $10.50 4 oz. Bottle (118.29ml) $5.60 $4.60 Siphon-Flo Inks (for Flat-Clamp Duplicators) 2018-601 STOCK# P-1 Black TISSUE SIZE MODEL PRINT AREA PRICE EA. 2" x 4" (50.8 x 101.6) 3" x 5" (76.2 x 127) $60.00 80.00 Rocker Model Duplicators 1624-000 R-3146 1631-000 R-4260 3-1/8" x 4-3/4" (79.38 mm x 120.65 mm) 4-1/4" x 6" (107.95 mm x 152.4 mm) Duplicator Inks Flat-Clamp Hand Duplicators 1647-000 FC-3146 STOCK# 3-1/8" x 4-3/4" (79.38 mm x 120.65 mm) 2-1/4" x 4" (57.15 x 101.6) OVERALL SIZE STYLE $58.00 PRICE PER THOUSAND (M): 1M 3M 5M Standard S Duplicator Stencils 2010-805 2010-809 S-3146 S-4260 3-1/8" x 4-3/4" (79.38 mm x 120.65 mm) 4-1/4" x 6" (107.95 mm x 152.4 mm) $60.50 118.80 Additional stencil sizes are available. Call for details. Priced in U.S. Dollars. $57.50 112.85 $54.45 106.90 Standard S Stencils 20 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 Adhesives & Glues For ungummed labels and carton sealing. Stikfast and GF-5 Glues are formulated with starch-based dextrin and are optimal for porous surfaces. Willbond, GF-59 and GF-779 adhesives are formulated with a synthetic polymer resin for performance on non-porous surfaces. Stikfast® II Glue For case sealing and porous surface bonding. Meets FDA and USDA requirements for food packaging. GF-5 Glue Water-soluble, freeze/thaw stable and meets FDA and USDA requirements for food packaging. This glue can be conveniently left in the machine if it’s covered with a damp cloth and plastic bag, which helps maintain its consistency. STOCK# MINIMUM ORDER PRICE EA. Stikfast II Glue 1204-502 1205-503 GF-59 Adhesive GF-5 Glue Ideal for affixing labels to metal containers including tinplate, terneplate, japanned steel or painted metal. Adheres to some varnished and coated surfaces. Also for use in automatic address labeling equipment when applying labels to coated paper. Meets FDA and USDA requirements for food packaging. 4500-200 4500-201 1 Gallon (3.79 L) 5-Gallon (18.93 L) Pail $14.50 65.00 1 Gallon (3.79 L) 5-Gallon (18.93 L) Pail $23.40 114.00 1 Gallon (3.79 L) 5-Gallon (18.93 L) Pail $44.00 199.00 GF-59 Adhesive 4500-202 4500-203 Minimum order applies. Priced in U.S. Dollars. Quik-Spray® Adhesive An excellent permanent or temporary bonding aerosol adhesive for a wide variety of applications. • Use Quik-Spray Adhesive on paper, cloth, cardboard, felt, rubber, vinyls, canvas, leather, wood and most plastics. • Non-clog valve provides uniform spray pattern. Low soak-in; will not bleed through. Translucent when dry. 13 oz. net weight (20 oz. volume). • New VOC-compliant formula. Contains no CFCs. QTY. PRICING/PRICE PER CAN: 1 CTN 2 CTNS 6 CTNS 12 CTNS MINIMUM ORDER 1203-503 1 Ctn $7.99 CON $7.43 $6.87 $6.31 NO CFCs INS W TA H HIC Quik-Spray Aerosol Adhesive NO CFCs R STOCK# L ET Additional quantity discounts available. Call for details. Packed 12 cans to a carton. Price per can. Minimum order applies. ET AY E DEP 6 ADHESIVES & GLUES HE OZO NE L GLUE & ADHESIVE APPLICATION GUIDE For Sealing or Applying Labels to: GLUE OR ADHESIVE TYPE FREEZE/ THAW STABLE APPROVALS PAPER, CARTONS AND WOOD COATED POLYETHYLENE POLYPROPYLENE GLASS PLAIN COATED TREATED UNTREATED METAL FDA PLAIN • • • • • 2 • • • • • 1 Stickfast II Dextrin GF-5 Dextrin • Willbond Resin • • • • • • • • • • • • • • Quik-Spray Aerosol PVC POLYTACK 1 TO 4 STRYENE (LOW TO HIGH) USDA 3 • • 3 21 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Glue Machines ! NEW GLUE MACHINES Label Dispenser Diagraph offers several machines designed to make the application of your plain paper or dry-gummed labels easy and efficient. These gluers are compatible with the glues and adhesives shown on the previous page. Label Pro 5.5 From Glue-Fast Applies a corduroy pattern of adhesive to any plain paper label. Label insertion activates gluer. For labels up to 5-1/2" (139.7 mm) wide–any length or shape. Stikfast® Electric Label Gluers Feature a removable, large-capacity glue tray and provide excellent glue control. Standard 115V A.C. motor operates at variable speeds. Available in 8" (203.2 mm), 14" (355.6 mm) roller widths. STOCK# LABEL WIDTH MODEL GLUE CAPACITY PRICE EACH Label Pro 5.5 Gluers 4500-105 5.5E (Electric) 5-1/2" (139.7 mm) $575.00 Stikfast Electric Label Gluers 4500-100 4500-102 SF8 SF14 7-1/2" (190.5 mm) 36 oz. (1.06 L) $915.00 13-1/2" (342.9 mm) 68 oz. (2.01 L) 1,190.00 Label Dispenser 8600-400 Label Dispenser - Electric 4.5" Hight Speed LD5100 $595.00 Priced in U.S. Dollars. TAPE DISPENSERS TDH201 Tape Dispenser The TDH201 tape dispenser feeds, moistens, and cuts definite length gummed tapes. The TDH201 is ideal for use in small to medium size shipping departments. This machine helps increase operator efficiency while reducing tape costs by eliminating waste. Our hardened steel cutting blades are designed for long life. TDH205 Tape Dispenser The TDH205 tape dispenser automatically feeds, moistens, and cuts definite length gummed tapes. The TDH205 is ideal for use in any shipping department. This machine helps increase operator efficiency while reducing tape costs by eliminating waste. Our hardened steel cutting blades are designed for long life. STOCK# MIN ORDER DESCRIPTION ! NEW PRICE EA Gummed Tape Dispenser 8600-100 8600-200 Manual Gummed TDH201 Electric Gummed TDH205 $295.00 895.00 Tape for Gummed Dispensers 8600-201 8600-202 3" Gummed Tape - Natural 3" x 600" 3" Gummed reinforced Tape 70mm x 450' Natural 10/CS $45.00 10/CS 55 .00 Tape Dispenser 8600-300 Industrial Tape ZC1000 $598.00 Priced in U.S. Dollars. 22 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww STOCK# Hand printers are the perfect solution for applying date codes, lot numbers and other product information in the warehouse where automatic coding is not possible. Available in both indexing and non-indexing (continuous print) models. All printers use Dilok Type (pg.25) DESCRIPTION PRICE Handi-Mark Coders 5600-045 #1 Porous Hand Printer HP100NI (Non Indexing) 2" x 6.5" print area 1785-200 Handi-Mark II (Indexing/Non Indexing) 3" x 8" print area $170.00 1785-851 Extra Die Wheel for Handi-Mark II $145.00 170.00 92.00 Handi-Mark Ink Cartridges 5600-048 Black Cartridge for #1 & #2 Porous Hand Printer 5600-043 Uninked Cartridge for #1 & #2 Porous Hand Printer 1785-854 DiDark for Handi-Mark II–black ink 1785-213 Foam for Handi-Mark II–uninked $17.55 14.75 17.80 11.50 Priced in U.S. Dollars. Hand Coders & Stampers HANDI-MARK HAND CODERS Hand Stampers ! NEW Rib-base stampers come with an uninked felt pad suited for industrial use for marking on porous surfaces. STOCK# DESCRIPTION 1710-300 1710-301 1710-302 0801-050 0802-050 0803-050 Hand Stamp, Alpo 20 Hand Stamp, Alpo 40 Hand Stamp, Alpo 80 Ink, Black Stamp Pad 4 oz Ink, Red Stamp Pad 4 oz Ink, Blue Stamp Pad 4 oz PRINT AREA (1/2" X 1-7/16") (13/16" X 2-1/8") ( 1-13/16" X 2-5/8") CHOOSING A ROLL CODING SYSTEM Order a Left-Hand Coder for This Side Order a Right-Hand Coder for This Side CONVEYOR DIRECTION PRICE $26.40 33.30 69.30 4.00 4.00 4.00 Call your Diagraph representative for assistance to select the right components for your application. • Coder Assembly • Friction bearers • Ink Cartridge • Type Holder • Type • Ink Choose a Right-Hand or Left-Hand Coder 1901-398 $8.50 23 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Roll Coders ROLL CODERS (Indexing) Economical friction-driven roll coders print product information, expiration dates and date/batch codes on your carton. Each model mounts vertically or horizontally on your production line to mark the side, top or bottom of a carton. SL/C Coders (Slim Line Roll Coders) Three models offer a range of print areas: • #1 SL/C • #2 SL/C • #3 SL/C 1" x 17" (25.4 mm x 431.8 mm) 2" x 17" (50.8 mm x 431.8 mm) 3" x 17" (76.2 mm x 431.8 mm) Print as low as 1-1/4" (31.75 mm) from the bottom edge of the carton. Uses DiLok, Flex Base or Hi-Speed type. Now with quick change capability - no need to purchase a separate quick change coder. Every SL/C coder has the quick change feature. Just pruchase and extra die wheel for quick and easy change in type. Now with quick change capability. Improved SL/C with quick change capability. Mini Coder An economical option for lighter-duty applications, the Mini Coder is ideal for coding small or lightweight items. Maximum print area 1" x 6" (25.4 mm x 152.4 mm); prints as low as 3/4" (19.05 mm) from the bottom edge of the carton. Uses DiLok type. STOCK# DESCRIPTION PRINT AREA PRICE *SL/C (Slim Line Coders) with Quick Change Capability 1780-115 1780-116 1780-215 1780-216 1780-315 1780-316 #1 SL/C, Left-Hand Kit 1" x 17" #1 SL/C, Right-Hand Kit (25.4mm x 431.8mm) #2 SL/C, Left-Hand Kit 2" x 17" #2 SL/C, Right-Hand Kit 2" x 17" # 3 SL/C, Left-Hand Kit 3" X 17" #3 SL/C, Right-Hand Kit 3" X 17" $550.00 550.00 605.00 605.00 660.00 660.00 The SL/C Coder Kits include DiLok type rings and friction bearers. * Call for quantity break pricing. 1741-200 1741-805 1741-830 SL/C Right-Hand Coder shown with DiLok Type. Now with Quick Change Feature Mini Coder 1" xmm 17"x 431.8 mm$250.00 Mini Coder 1" x 6" (25.4 (25.4mm xn/a 431.8mm) Side Mount Bracket 72.00 Extra Die Wheel Assembly n/a 125.00 Ink, cartridges and type for all the above coders are sold separately. Priced in U.S. Dollars. Coder parts shown below, can extend the life of your coder and be easily replaced. Mini Coder for small or lightweight items. 24 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 Roll Coder Type 6 ROLL CODER TYPE DiLok Type DiLok is rubber type molded to a tongue-and-groove base which interlocks with the die wheel. Provides excellent message flexibility. Different type sizes can be mixed on the same line. For use with Diagraph RCN, SL Series, Mini, SL/NPW, and Handi-Mark coders. Choose from three different kinds of type: DiLok, Flex Base and IIi-Speed. See page 26 for more information ACTUAL SIZE EXAMPLES STOCK# DESCRIPTION LETTER HEIGHT FONT/FIGURE ASSORTMENT PRICE DiLok Letter Sets (contain letters & figures) DiLok 1/2" DC 12 Flex Base Type Flex Base is molded rubber type with a flat base for easier installation and more uniform marking. Long-wearing, extra-deep characters provide sharper marking. Type holders are a necessity with this printing method. Please discuss your type requirements with your Diagraph Representative. For use with SL Series indexing roll coders. DiLok 1" DC 10 Custom sorts and logo mats are available in dilok and flexbase. ACTUAL SIZE EXAMPLES Flex Base 1/2" FB 12 1710-008 1710-001 1710-005 1710-002 1710-006 1710-003 1710-004 1/8" DC-18 5A Font 1/4" DC-14 5A Font Style A13 3 Tie 3/8" DC-38 5A Font Style U75 1/2" DC-12 5A Font Style U76 5/8" DC-58 5A Font Style G77 3/4" DC-34 5A Font Style G78 1" DC-10 3A Font Style G79 1/8" (3.175mm) $37.65 1/4" (6.35mm) 27.60 3/8" (9.525mm) 29.10 1/2" (12.7mm) 48.35 5/8" (15.875mm) 52.70 3/4" (19.05mm) 66.85 1" (25.4mm) 64.85 *DiLok Figure Sets (contain 4 each: 1 thru 0) 1711-008 1711-001 1711-005 1711-002 1711-006 1711-003 1711-004 1/8"DC-18 Figure Set 1/4" DC-14 4F Figure Set Style A13 3 Tie 3/8" DC-38 4F Figure Set Style U75 1/2" DC-12 4FFigure Set Style U76 5/8" DC-58 4F Figure Set Style G77 3/4" DC-34 4F Figure Set Style G78 1" DC-10 4F Figure Set Style G79 1/8" (3.175mm) $16.55 1/4" (6.35mm) 15.90 3/8" (9.525mm) 14.95 1/2" (12.7mm) 17.15 5/8" (15.875mm) 18.65 3/4" (19.05mm) 23.15 1" (25.4mm) 27.85 *Flex Base Letter Sets (contain letters & numbers) 1712002 1712010 1712008 1712003 1712004 Type, FB Font 1/2" Type, FB Font 1/2" Narrow Type, FB Font 3/8" Type, FB Font 3/4" Type, FB Font 1" 1/2" (12.7mm) $56.00 1/2" (12.7mm) 56.00 3/8" (9.525mm) 50.95 3/4" (19.05mm) 96.60 1" (25.4mm) 117.60 * Flex Base Figure Sets (contain 4 each: 1 thru 0) Hi-Speed Type Flex Base 3/4" FB 34 1713002 1713010 1713008 1713003 1713004 Type, FB Figure Set 1/2" Type, FB Figure Set 1/2" NRW Type, FB Figure Set 3/8" Type, FB Figure Set 3/4" Type, FB Figure Set 1" 1/2" (12.7mm) $22.95 1/2" (12.7mm) 22.95 3/8" (9.525mm) 21.55 3/4" (19.05mm) 33.05 1" (25.4mm) 39.50 * Other size font & figure sets are available. Call for quote. Custom sorts and logo mats are available in dilok and flexbase. Other sizes and custom mats are available - Call for details. Priced in U.S. Dollars. For high-speed applications. Call for details. FONT/FIGURE ASSORTMENTS ABCDEFGHIJKLMNOPQRSTUVWXYZ 54546444522535542555323232 1 2 3 4 5 6 7 8 9 0 . ,& $ 322222222342112 1234567890 FIGURE 5A ( 4 Each ) ABCDEFG HIJKLMNOPQRSTUVWXYZ 32324222321223331233222121 1234567890. , $ 32222222234212 3A 25 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX Roll Coder Inks STOCK# DESCRIPTION MIN. ORDER PRICE EACH CR CODER/STAMP PAD INK 0812-050 0814-050 0824-050 0834-050 0844-050 0884-050 STOCK# Black Black Red Blue Green Violet Quart Gallon Gallon Gallon Gallon Gallon DESCRIPTION 4/CTN 4/CTN 4/CTN 4/CTN 4/CTN 4/CTN MIN. ORDER $15.00 40.00 45.10 45.10 45.10 45.10 PRICE EACH DL/XLM Roll Coder Inks (for Porous Surfaces) ROLL CODER INKS These inks are for use with DiDark®, XLM®, and Foam ink cartridges featured right. Our inks for non-porous surfaces offer a range of drying times. Specialty inks and custom ink colors are available. Call for more information. STOCK# MINIMUM ORDER DESCRIPTION DRY TIME PRICE EACH Roll Coder Inks (for Non-Porous Surfaces) 0812-073 0814-073 0815-073 0824-051 0834-051 0844-051 Black Black Black Red Blue Green STOCK# DESCRIPTION 1714-100 1714-101 1715-100 1715-101 1716-100 1716-101 #1 DiDark® #1 DiDark® #2 Uninked #2 Black #3 Didark® #3 Didark® FD Black 1 Quart (.9475 L) 10-20 sec 27.50 FD Black 1 Gallon (3.79 L) 94.50 0882-055 FD Purple * 1 Quart (.9475 L) 10-20 sec sec 10-20 10-20 sec 0884-055 FD Purple * 1 Gallon (3.79 L) 10-20 sec 103.95 0832-057 Blue * 1 Quart (.9475 L) 10-30 sec 10-30 10-30 sec sec 30.25 Foam Ink Cartridges 17.00 1717-801 1717-802 1717-803 Conditioner 1 Quart (.9475 L) * These inks are not SARA compliant. Priced in U.S. Dollars. INK CARTRIDGES for SL/C & Mini Coders DiDark® Cartridges Economical, convenient, disposable. For porous surfaces. Available uninked or pre-inked. Recommended for dye type ink only. XLM® Cartridges The premium cartridge–extra long-lasting and re-inkable. Most effective on porous surfaces. Available uninked or pre-inked. Micro-X Cartridges Ideal for continuous web applications on porous surfaces. Not re-inkable. Foam Cartridges Recommended for use with non-porous inks including pigmented. Available uninked only. Contact your Diagraph representative for appropriate foam cartridge applications. COLOR MIN. ORDER PRICE EA. Uninked Black Uninked Black Uninked Black 3 Cartridges 3 Cartridges 2 Cartridges 2 Cartridges 1 Cartridge 1 Cartridge $15.00 16.50 19.00 21.00 24.00 28.00 Uninked Uninked Uninked 1 Cartridge 1 Cartridge 1 Cartridge $29.35 36.70 45.15 Uninked Black Uninked Black Uninked Black 3 Cartridges 3 Cartridges 2 Cartridges 2 Cartridges 1 Cartridge 1 Cartridge $22.00 24.00 37.75 39.85 53.50 56.50 DiDark® Ink Cartridges 0814-058 0802-605 $21.00 63.00 284.00 74.25 74.25 74.25 * Call for quantity discounts. 0812-058 30.25 1 Quart (.9475 L) 1 Gallon (3.79 L) 5 Gallons (18.93 L) 1 Gallon (3.79 L) 1 Gallon (3.79 L) 1 Gallon (3.79 L) #1 Foam #2 Foam #3 Foam XLM® Ink Cartridges 1719-100 1719-101 1719-200 1719-201 1719-300 1719-301 #1 Uninked #1 Black #2 Uninked* #2 Black #3 Uninked* #3 Black *Caution: Use only OSM Ink, 1201FD, 1205FD, or 1303 with XLM Cartridges Micro X Cartridges 1701-401 1702-401 #1 Black Micro X #2 Black Micro X Black Black 1 Cartridge 1 Cartridge $22.50 27.00 Mini DiDark Cartridge Uninked Mini DiDark Cartridge Black Mini XLM Cartridge Uninked Mini XLM Cartridge Black Mini Foam Cartridge Uninked 6 Cartridges 3 Cartridges 1 Cartridges 4 Cartridges 1 Cartridge $14.00 15.00 18.00 19.00 19.00 Mini Coder Ink Cartridges 1741-110 1741-111 1741-100 1741-101 1741-120 Price per cartridge. Minimum order applies. Priced in U.S. Dollars. * Call for quantity discounts. DiDark®, XLM® and Diagraph® are registered trademarks of Illinois Tool Works. 26 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww Web Roll Coders NON-POROUS WEB ROLL CODERS SL/NPW Coder The low-maintenance SL/NPW Coder is ideal for web printing applications. It features a 15/16" x 17" (23.81 mm x 431.8 mm) print area and a unique ink reservoir which automatically re-inks the cartridge. For use with either dye type or pigmented type inks. Uses DiLok Type. SL/NPW Mini Coder If you need to do high-volume web coding in a small print area, the low-maintenance SL/NPW Mini Coder is the solution for you. It features a 15/16" x 9" (23.81 mm x 228.6 mm) print area and an ink reservoir that automatically re-inks the cartridge. For use with dye type or pigmented type inks. Uses DiLok Type. INKS FOR SL/NPW CODERS XF Neoprene Ink Cartridges Disposable ink cartridges feed ink only on demand. Pre-inked; can be re-inked using ink reservoirs in matching colors. SL/NPW Coder Ink Reservoirs Four-ounce disposable ink reservoir provides a constant ink supply to the neoprene ink cartridge. STOCK# DESCRIPTION PRINT AREA PRICE SL/NPW (Slim Line/Non-Porous Web Coders) 5600-008 5600-009 Left-Hand, Top Mount Right-Hand, Top Mount 15/16" x 17" 15/16" x 17" $1210.00 1210.00 15/16" x 9" 15/16" x 9" $1070.00 1070.00 SL/NPW Mini Coder 5600-000 5600-003 Left-Hand, Top Mount Right-Hand, Side Mount Coders do not include reservoirs, cartridges or type. Priced in U.S. Dollars. SL/NPW Mini Coder STOCK# COLOR PRICE XF Neoprene Ink Cartridges 5900-001 5900-002 5900-003 5900-004 5900-005 5900-006 5900-007 Black Red Green Blue Yellow * White * Violet $31.50 31.50 31.50 31.50 31.50 31.50 31.50 Black Red Green Blue Yellow * White * Violet $7.20 7.20 7.20 7.20 7.20 7.20 7.20 Ink Reservoirs 5900-100 5900-101 5900-102 5900-103 5900-104 5900-105 5900-106 * Pigmented Inks Priced in U.S. Dollars. Ink Reservoir automatically re-inks cartridge. SL/NPW Coders use DiLok Type Items bearing this symbol require extended manufacturing lead times. Items bearing this symbol cannot be shipped by air. 27 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp Reciprocating Coders RECIPROCATING CODERS RCN Coders, for Intermittent-Motion Applications, produce sharp, fast-drying marks on products and packaging film. These coders print from one to three lines of small-character text directly on your product with a wide selection of ink types and colors. Mark on a variety of surfaces including: boxes, bags, jars, cans, labels, blister packs, and small plastic or metal parts. We offer four types of RCN Coders: Basic, Electric, All-Air and a combination Electric/Air. These coders work well with intermittent-motion conveyors or off-line semi-automatic operations, marking up to 80 products per minute. Use neoprene DiLok type and ink cartridges with quick-drying inks. Consult your Diagraph representative for the appropriate RCN coder, accessories and ink for your application. RCN Coders produce sharp, fast-drying marks on both porous and non-porous surfaces. The Basic RCN/1S The RCN basic unit has no triggering controls and uses the four-way valve and timing device of your existing equipment. This eliminates the need for duplicate controls. Easy to install, the RCN provides four holes for stable mounting to the parent equipment. On-line operation is simple and reliable. When the unit is triggered, compressed air moves the shaft up so the type contacts and rotates the ink cartridge, and then moves the shaft and freshly inked type down to mark the product surface. All-Air RCN/1AC These all-air powered systems include a product detector switch and self-cycling air logic. For a consistent, high quality mark, a dwell adjustment knob controls the time the printhead stays in contact with the product surface. The all-air system is popular for heavy products or applications where electricity is not readily available or not desired. It is the best choice when environmental conditions, such as explosion-proof and wash-down areas, do not allow electricity. STOCK# PRICE DESCRIPTION RCN Coder 1770-200 1770-830 1770-903 RCN-S Basic Coder* RCN-1AC All Air Coder** RCN-1E Electric/Air Coder** $720.00 1,330.00 1,020.00 RCN Coder Accessories 1770-823 1771-823 RCN-1 Type Holder: Clamping style for 3/4" x 1" (19 mm x 25.4 mm) RCN-2 Type Holder: Clamping style for 3/4" x 2" (19 mm x 50.8 mm) * 220 volt model available STOCK# $90.00 120.00 ** Non-stock item. Allow 3 to 5 weeks lead time. Priced in U.S. Dollars MINIMUM ORDER PRINT AREA DESCRIPTION PRICE RCN Coder Cartridges (uninked) 1770-808 1771-808 1770-803 1771-803 1785-011 1771-011 DiDark Cartridge - RC-1 DiDark Cartridge - RC-2 XLM Cartridge - RC-1 XLM Cartridge - RC-2 Foam Cartridge - RC-1 Foam Cartridge - RC-2 3/4" x 1" (19 mm x 25.4 mm) 3/4" x 2" (19 mm x 50.8 mm) 3/4" x 1" (19 mm x 25.4 mm) 3/4" x 2" (19 mm x 50.8 mm) 3/4" x 1" (19 mm x 25.4 mm) 3/4" x 2" (19 mm x 50.8 mm) 6 3 1 1 1 1 $14.00 20.00 19.00 20.00 11.00 13.80 Price per cartridge. Minimum order applies. Priced in U.S. Dollars. STOCK# DESCRIPTION ACTUAL SIZE 1” FONT/FIGURE ASSORTMENT PRICE 5A Figure* 5A Figure* 5A Figure* 5A Figure 5A Figure 5A Figure $41.55 22.40 39.50 20.35 39.50 19.75 41.55 19.75 39.50 22.40 27.00 15.00 Dilok Type (3-tie neoprene) for RCN Coders 1710-007 1711-007 1710-008 1711-008 1710-009 1711-009 1710-010 1711-010 1710-011 1711-011 1710-001 1711-001 RCN Coder and Accessories 7/64" (2.78 mm) Letters 7/64" (2.78 mm) Figures 1/8" (3.18 mm) Letters 1/8" (3.18 mm) Figure 9/64" (3.57 mm) Letters 9/64" (3.57 mm) Figures 3/16" (4.76 mm) Letters (Regular) 3/16" (4.76 mm) Figures (Regular) 3/16" (4.76 mm) Letters (Condensed) 3/16" (4.76 mm) Figures (Condensed) 1/4" (6.35 mm) Letters 1/4" (6.35 mm) Figures Figure sets include 4 of each figure. (*) Indicates figure sets with 5 of each figure. Priced in U.S. Dollars. 28 6-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 IV 700 6 IV 700™ Large Character Ink Jet Printer Economical ink jet printer for one-line coding applications The IV/700 is the market’s best value among low-cost large character ink jet printers. Designed to surpass competitive systems in print quality, print speed, message control and printhead flexibility, it offers reliable printing of single-line codes at a very affordable price. Features & Benefits • Prints single-line alphanumeric messages • Print Speed ranges from 5 fpm to 250 fpm • Choice of 5-dot, 7-dot and 7-dot bold fonts • Choice of six high-visibility ink colors • Stores up to 99 fifty-character messages • QWERTY Keypad with many convenience features • Adjustable Printhead for side, top and bottom printing • Large Ink Canister can be replaced during production • Features: 12 function keys for editing; built-in count, shift, time and date codes; “ink out” alarm; two-line, 40-character liquid crystal display; modular printhead STOCK# DESCRIPTION QTY PER PACK PRICE IV700™ Printer 5750-400 IV700 Plus, English/European 5750-401 IV700 Plus, w/External Photocell - $1,595.00 1,995.00 6 6 6 6 2 2 $66.00 95.00 95.00 95.00 25.00 25.00 IV700™ Inks 5750-243 5750-244 5750-245 5750-246 5750-249 5750-242 Ink, Twp Black Ink, Twp Red Ink, Twp Blue Ink, Twp Green Twp Maintenance Spray Conditioner, Twp 13.5 oz All products priced per each. Minimum order applies. Priced in U.S. Dollars. 29 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX 1-866-350-0196 TOLL-FREE 1-866-350-0196 FAX ITW Inks ITW INKS Formulated for Marsh® Inkjet Printers The QUALITY You Need Consistent performance of your ink jet printers is vital to your production line operation, so you need quality inks that deliver sharp barcodes and text messages time after time, year after year. That is exactly what you get with ITW Inks. The VALUE You Want Ink quality is vital, but it’s not the only factor that is critical to your success. Controlling costs is just as important as optimizing quality, and that’s where ITW Inks give you something extra — a competitive edge in a competitive world. • Variety of inks for Marsh models/printheads • Inks for valve systems and Unicorn® printers • Inks for porous and non-porous surfaces • High-resolution inks for special applications • Sub-micron filtration assures quality control • Fully inspected to ensure consistent quality • Available in bottles, pails or cartridges • ITW is a world leader in inkjet technology & products • Low price/high value is an ITW core philosophy • Competitive lead times and deliveries STOCK# DESCRIPTION PRICE EACH PRINTER TYPE 5 Gallon 5 Gallon 5 Gallon 5 Gallon * * * * Dli or ML8 Dli or ML8 Dli or ML9 Dli or ML10 Case of 12 Case of 12 Case of 12 - * * * * * Unicorn Unicorn - QT/CS 9 * * SIZE ITW Inks-Especially Made for MarshTM Printers ITW1100 ITW2100 ITW1421 ITW2406 ITW1122 ITW2107 ITW1500 ITWP001 ITWP002 Ink, Black Porous Cleaner, Porous Ink, Black Dye Non-Porous Cleaner, Non - Porous Ink, Black Porous Cartridges 7.8 oz/230 mil Cleaner, Porous Cartridges Ink, Black Hi-Res 500ML Bottle Adapter, 5 Gallon Cap Assembly Adapter, Hi-Res 500ml Bottle ITW Continuous Ink Jet Inks (CIJ) ITW4001 ITW4104 Ink, CIJ Black MEK Gen Purpose Makeup, CIJ for ITW4001 QT/CS Consistent performance of ink jet printers is vital to your production line. That is exactly what you get with ITW Inks. Ink Compatability Call for details Call for details * Call for pricing. All products priced per each. Minimum order applies. Priced in U.S. Dollars. 1901-398 $8.50 30 RDER 30ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww t’s as easy as 1, 2, 3! Just go to our web site and browse our online catalog. Clicking the “Add” button puts items in your shopping cart and checkout is faster than any main street convenience store you could imagine. Confirmation is sent to you by the e-mail address you provide and your done. I Don’t have internet access? No problem. Just dial our toll-free number to talk to our customer service representatives who are more than happy to take your order and answer any questions you may have. It's Easy to Order from Diagraph® • Monday - Friday 7:00 am–4:30 pm (CENTRAL TIME) Business Policies • Phone: before 12:00 pm CST will ship by the end of the next business day. In-stock products are generally available to any customer within two to three days (up to 5 days for some areas in California) by normal UPS shipment. All items ship F.O.B. Marion, IL. 1-800-521-3047 • Order OnLine: www.diagraphmsp.com • 24-Hour Fax: 1-866-350-0196 1-618-997-1766 • Order by Mail: Diagraph MSP Attn: Catalog Order Dept. 5307 Meadowland Parkway Marion, IL 62959 • e-mail your comments or questions to: sales@diagraphmsp.com Prices subject to change without notice. Shipping: All orders for standard in-stock items received International Shipments: for shipping and pricing information, contact our International Division at 1-618-997-1753 or FAX 1-618-997-1766. Rush Shipments: Phone orders for any in-stock, standard catalog item placed by 2:00 pm CST can be shipped UPS Next Day Air, UPS 2nd Day Air or FedEx for an additional charge. Standard products with longer production times are marked by this symbol: . Custom orders may also require longer lead times. Your account representative will estimate delivery of these items when you place your order. Sales Tax and Freight: Sales tax and freight/handling charge will be added to all domestic shipment orders. If tax exempt, you must provide your sales tax exemption number and a copy of your exemption certificate to us. Returns: There are never any restocking charges on returned goods as long as the following conditions are met: Goods are received freight prepaid within 30 days of the invoice date; our returned goods authorization number (RGA) is clearly marked on the outside of each package; and the returned goods are in their original packaging. On items returned after 30 days, there is a 15% restocking charge. To request an RGA number from your account manager, call 1-800-521-3047. Equipment and special order custom items cannot be returned. Payment Terms: Credit Card required for all orders under $500 ($100 for existing customers). For large orders, open terms may be established by completing our credit application. Call 1-800-521-3047 for details. Shipping Via Truck: Some heavy or extra large items ship by truck or directly from the manufacturer and require additional time. Truck orders ship “prepaid and add”, unless otherwise requested. Additional fee for dock appointments. Contract Blanket Orders: Call for information and possible savings on blanket orders. 31 w ww.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp ph Marking & Stenciling Products Diagraph Marking & Stenciling Products Diagraph Marking & Stenciling Products Diagraph Marking & Stenciling Products Diagrap Oneshot® Kit A SOLUTION FOR ALL OF YOUR MARKING NEEDS! with Black GS Series Ink $39.50 sold on page 13 & 14 Stencil Board Diagraph Stencil Board is processed with a special formula to extend the life of your stencil machine. As low as $49.50 per pack; sold on page 11 Rol-It-On Glues & Adhesives For ungummed labels and carton sealing. As low as $14.50 per gallon; sold on page 21 Contains a 3" (76.2 mm) latex roller assembly with roller cover & One quart (.9475 L) of R black ink Sold on page 16 Improved to cut .015 stencil board Electronic Stencil Machine Kits Contains SC5 Cutter, Stand, Basic Software, 3" Oneshot Assembly, 2-60° Cutting Blades, 1 Black Cartridge, 2 Rolls Cutting Media (Ultra Cut or Stencil Board). As low as Permit No. 90 5307 Meadowland Parkway Marion, IL 62959 Burlington, WI To order, call: 1-800-521-3047 Online: www.diagraphmsp.com Hundreds of off-the-shelf marking products for your: If the addressee is not known, please route to the purchasing agent for shipping/warehouse supplies. Stock No. 5803-192 Attention Mailroom Printed in U.S.A. ✔ Shipping Room ✔ Warehouse ✔ Plant Operations © 2006 Diagraph Corporation PRSRT STD US Postage Paid $3,950 Sold on page 9 RDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE www.diagraphmsp.com ORDER ONLINE ww
© Copyright 2024 Paperzz
