WATERPROOFING MEMBRANES SELF-ADHESIVE BITUMINOUS MEMBRANES ESHASTICK 3000-X ® - SELF ADHESIVE ELASTOMERIC BITUMINOUS WATERPROOFING MEMBRANE WITH HDPE TOP COVER ROOF, WALLS AND UNDERGROUND STRUCTURES WATERPROOFING/ RADON & METHANE GAS BARRIER GENERAL DESCRIPTION EshaStick 3000-X is an advanced-technology self-adhesive elastomeric bituminous waterproofing felt. It is produced from SBS modified bitumen which exhibits impressive elasticity and enhanced viscoelastic properties even at extremely low temperatures (-40 °C), and special additives that give the membrane self-adhesive properties, hence the ability to stick very easily to a suitably prepared substrate without the need of a torch. EshaStick 3000-X, is 1.5 mm thick, has a top cover of High Density Polyethylene Sheet (HDPE) with enhanced mechanical properties also functioning as its reinforcement, and a bottom cover of silicon release paper. ESHASTICK 3000 X self-adhesive membranes have a wide application field:  Waterproofing of concrete foundation and underground sidewalls.  Radon and Methane Gas Barrier  Waterproofing of flat roofs, either under the thermal insulation element (inverted roofs), or above the thermal insulation.  EN ISO 9001: 2000 Directly on both rigid polyurethane metallic prefabricated boards and extruded polystyrene boards. EN ISO 14001: 2004  On metal or wood surfaces.  To both metal and concrete pipes for protection and waterproofing.  Waterproofing of garden pots. CHARACTERISTICS/ADVANTAGES  Excellent adhesion to rigid and smooth pre-primed surfaces.  Quick and Easy application, hence lower application cost  Being cold-applied and installed without the use of naked flames EshaStick Alpes 1.2 offers higher safety level on the job.  Extremely high puncture resistance  Excellent elasticity - elongation at tensile break exceeding 300%.  Endurance to extreme temperatures (-40 to 125 °C) ALFA ALFA ENERGY Α.Β.Ε.Ε. Γραφεία - Εργοστάσιο Αττική: Παραλία Ασπροπύργου, 19300 Ασπρόπυργος Αττικής – Τηλ: 210-5518700 Fax: 210-5572974 Γραφεία - Αποθήκη Θεσ/νίκη: Ηπείρου 18, 57009 Καλοχώρι, Θεσσαλονίκη – Τηλ: 2310-783725, Fax: 2310-783326 www.esha.gr info@esha.gr Α.Μ.Α.Ε.:8088/03/B/86/63(06) EshaStick ENG 3000-Χ_Έκδοση 1_3_2012  Radon and Methane gas transmittance barrier  Root Barrier NORMS/CERTIFICATIONS  Certified according to EN/DIN 18195, EN 13969 type A & T  Certified with CE 0120-FPC GB 06/69900 For all available certificates and certifications please contact Esha Sales Department. STORAGE Membrane rolls should be stored in their original package, in vertical position, protected from direct sunlight, rain, snow and ice. APPLICATION PROCEDURE  Surfaces should be smooth, dry and dust free, clean from oil, rust and foreign matter.  The surface is primed with ESHALAC 50S. Primer is cold applied as supplied, by brush, roller or spray gun and is allowed to dry. Primer consumption:  -Metal surface : 150-250 gr/m2 in one layer -Concrete surface : 250-450 gr/m2 in one layer ESHASTICK 3000 x self-adhesive waterproofing membrane is then applied and pressadhered onto the dry and primed surface, after peeling off its protective silicon release paper.  Overlapping of the membrane sheets should not be less than 5 cm. Waterproof sealing of the seams is achieved by applying local pressure with a seam roller or rounded wood piece. EN ISO 9001: 2000 At temperatures below 5 oC, the adhesion properties of ESHASTICK 3000 X are enhanced EN ISO 14001: 2004 by gently heating the membrane's tacky surface with a hot-air gun or torch. Application notes  Application temperature should be higher than 5 °C.  The waterproofing should be carried out by technicians, properly trained and certified in the bituminous membranes application. For a more detailed description of bituminous waterproofing membranes’ application please contact the Esha Sales Department. ALFA ALFA ENERGY Α.Β.Ε.Ε. Γραφεία - Εργοστάσιο Αττική: Παραλία Ασπροπύργου, 19300 Ασπρόπυργος Αττικής – Τηλ: 210-5518700 Fax: 210-5572974 Γραφεία - Αποθήκη Θεσ/νίκη: Ηπείρου 18, 57009 Καλοχώρι, Θεσσαλονίκη – Τηλ: 2310-783725, Fax: 2310-783326 www.esha.gr info@esha.gr Α.Μ.Α.Ε.:8088/03/B/86/63(06) EshaStick ENG 3000-Χ_Έκδοση 1_3_2012 TECHNICAL CHARACTERISTICS BITUMINOUS COMPOUND TOP SURFACE FINISH Elastomeri (SBS) bitumen with selfadhesive properties High strength cross-laminated H.D.P.E. firm BOTTOM SURFACE FINISH Silicone release paper - REINFORCEMENT THICKNESS EN 1849-1 1,5 mm Tensile strength longitudinal/ transversal EN 12311-1 215 / 220 Ν/50 mm Elongation longitudinal/ transversal EN 12311-1 324 % / 238 % Impact Resistance ΕΝ 12691 Met.A 500mm / Met.B 1000mm Static load resistance EN 12730 Tear Resistance ΕΝ 12310-1 Impermeability EN 1928 Vapour transmission rate ΕΝ 1931 Water absorption ASTM D 570 Hydrostatic test DIN 52123 / DIN 16935 MetA 10 kg / Met. B 15kg 125 N / 65 N Pass (≥ 60 Kpa) 90.000 μ 0,09% > 6 bar (24hs) / no leakage at 3 bar for 1 hr EN ISO 9001: 2000 EN ISO 14001: 2004 Permeability to Radon gas SP Swedish Nat. Testing & Research Institute 5,7 x 10-12 m2/s Permeability to Methane gas CSI Method < 5 cc/m2 x 24 h x atm Operating temperature range - 40 °C / + 80 °C Application temperature range +5 °C / + 45 °C Inflammability classification DIN 4102 Β2 Reaction to fire EN 11925 - 2, EN 13501-1 E Roll Dimensions (W x L) EN 1848-1 1 m x 20 m ALFA ALFA ENERGY Α.Β.Ε.Ε. Γραφεία - Εργοστάσιο Αττική: Παραλία Ασπροπύργου, 19300 Ασπρόπυργος Αττικής – Τηλ: 210-5518700 Fax: 210-5572974 Γραφεία - Αποθήκη Θεσ/νίκη: Ηπείρου 18, 57009 Καλοχώρι, Θεσσαλονίκη – Τηλ: 2310-783725, Fax: 2310-783326 www.esha.gr info@esha.gr Α.Μ.Α.Ε.:8088/03/B/86/63(06) EshaStick ENG 3000-Χ_Έκδοση 1_3_2012 Tolerances in the nominal values are in accordance with respective standards. Producer reserves the right to modify the properties of his products. The information contained in this leaflet is, to the best of our knowledge, true and reliable and is supported by the present state of our knowledge. According to the care taken and the method of application, upon which we have no influence, the values are subject to divergence. Therefore for best results, prior to use, an application test should be made by the user under his own processing conditions. EN ISO 9001: 2000 EN ISO 14001: 2004 ALFA ALFA ENERGY Α.Β.Ε.Ε. Γραφεία - Εργοστάσιο Αττική: Παραλία Ασπροπύργου, 19300 Ασπρόπυργος Αττικής – Τηλ: 210-5518700 Fax: 210-5572974 Γραφεία - Αποθήκη Θεσ/νίκη: Ηπείρου 18, 57009 Καλοχώρι, Θεσσαλονίκη – Τηλ: 2310-783725, Fax: 2310-783326 www.esha.gr info@esha.gr Α.Μ.Α.Ε.:8088/03/B/86/63(06) EshaStick ENG 3000-Χ_Έκδοση 1_3_2012