ital mec 101001011 Objective data sheet COSTRUZIONI ELETTROMECCANICHE VHF 2 Way Combiner The Italmec VHF two way combiner is designed on micro strip technology and manufactured on high quality laminates. • • • • • 170 - 240 MHz 50 Ohm In/Out impedance Isolated Input Ports Directional coupler on board (optional) Dimensions (LxWxH): 225 x 93 x 10 mm 8.85” x 3.66”x 0.39” Electrical Specifications Parameter Min. Output power Typ. Max. Units. Note 650 700 W CW Return Loss input ports -15 -17 dB Return Loss output port -18 -20 dB Insertion Loss @ 240 MHz 0.3 dB Amplitude Unbalance ± 0.05 dB Phase Unbalance ±2 deg -22 dB Isolation between output ports -20 Input Connection Solder tab Output Connection Solder tab Rev. 01 – 10 February 2014 - Issued by: M. Rossi ITALMEC s.r.l. strada delle Conce, 7 - 05018 Orvieto (TR) – ITALY – tel. E fax +39 (0)763 393912 Internet : www.ital-mec.com E-mail : italmec@ital-mec.com ital mec 101001011 COSTRUZIONI ELETTROMECCANICHE Objective data sheet Typical performances S11 Return Loss Output Output Port S22 Insertion loss Return Loss Input Input Ports Rev. 01 – 10 February 2014 - Issued by: M. Rossi ITALMEC s.r.l. strada delle Conce, 7 - 05018 Orvieto (TR) – ITALY – tel. E fax +39 (0)763 393912 Internet : www.ital-mec.com E-mail : italmec@ital-mec.com ital mec 101001011 COSTRUZIONI ELETTROMECCANICHE Objective data sheet S21 Insertion Losses S32 Insertion loss Isolation Input Input Ports Rev. 01 – 10 February 2014 - Issued by: M. Rossi ITALMEC s.r.l. strada delle Conce, 7 - 05018 Orvieto (TR) – ITALY – tel. E fax +39 (0)763 393912 Internet : www.ital-mec.com E-mail : italmec@ital-mec.com ital mec 101001011 COSTRUZIONI ELETTROMECCANICHE Objective data sheet Mechanical Layout Screws Type: Screws point A: 12 M3 Socket head cap screws + 12 Split lock washers WZ ø 3.5 Ports Configuration Rev. 01 – 10 February 2014 - Issued by: M. Rossi ITALMEC s.r.l. strada delle Conce, 7 - 05018 Orvieto (TR) – ITALY – tel. E fax +39 (0)763 393912 Internet : www.ital-mec.com E-mail : italmec@ital-mec.com ital mec 101001011 COSTRUZIONI ELETTROMECCANICHE Objective data sheet IMPORTANT NOTICE Italmec reserve the right to make changes to the product(s) or information contained herein without notice. Italmec assumes no responsibility for any errors which may appear in this document. Warranty information applicable to the product identified herein is available upon request. Nothing contained herein shall constitute a warranty, representation or guarantee of any kind. Italmec expressly disclaims all other warranties, express and/or implied including but not limited to warranties of merchantability, and of fitness for a particular purpose, use or application. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Italmec. Rev. 01 – 10 February 2014 - Issued by: M. Rossi ITALMEC s.r.l. strada delle Conce, 7 - 05018 Orvieto (TR) – ITALY – tel. E fax +39 (0)763 393912 Internet : www.ital-mec.com E-mail : italmec@ital-mec.com
© Copyright 2024 Paperzz